Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753566AbYGSDnV (ORCPT ); Fri, 18 Jul 2008 23:43:21 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750931AbYGSDnK (ORCPT ); Fri, 18 Jul 2008 23:43:10 -0400 Received: from an-out-0708.google.com ([209.85.132.245]:36128 "EHLO an-out-0708.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750784AbYGSDnE (ORCPT ); Fri, 18 Jul 2008 23:43:04 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version :content-type:content-transfer-encoding:content-disposition :references; b=AQQpC6Vjpc7VgLBY+e6JRnyTaOP8HwI0JHYzJfTNH42v6lBG0g3PMtS8M1welWt8fa 58U/mwK/uaPTGS8Z6jgYEBJe8UfYlAh2Sf9eQwQGcWkZpP2CmYmS+qI9nQVIZFsYC0/i yWWREcDfZCjIZWlN85pOhVTjSlacKlD9V7dJ4= Message-ID: Date: Fri, 18 Jul 2008 20:43:02 -0700 From: "Justin Mattock" To: "Jack Howarth" Subject: Re: [PATCH] x86,pci: dmi check for mackpro 2.2 mmconf Cc: "Yinghai Lu" , "Ingo Molnar" , "Thomas Gleixner" , "H. Peter Anvin" , jbarnes@virtuousgeek.org, linux-kernel@vger.kernel.org In-Reply-To: <20080719032845.GA9662@bromo.msbb.uc.edu> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <200807180941.09779.yhlu.kernel@gmail.com> <20080718202118.GC24122@elte.hu> <86802c440807181326l489b7763sdb040f5b6e575d8c@mail.gmail.com> <20080719005849.GA9055@bromo.msbb.uc.edu> <86802c440807181822l5138ff85k7d8c2e2702a11025@mail.gmail.com> <20080719032845.GA9662@bromo.msbb.uc.edu> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 98896 Lines: 2019 On Fri, Jul 18, 2008 at 8:28 PM, Jack Howarth wrote: > YH, > The mmconf_end_bus_num_detect.patch and mmconf_end_bus_num_detect_fix.patch both applied > cleanly to the current linus kernel git and solve my problems with MMCONFIG not starting. > I am attaching a dmesg log below of a boot with 'debug apic=verbose initcall_debug pci=routeirq'. > If you look at the section immediately before the line... > > pci 0000:00:1e.0: transparent bridge > > you will see that it is radically different from what I posted for the freeze under PCIEASPM > with MMCONFIG (using your original mmconfig patch)... > > PCI: 0000:00:1f.1 reg 10 io port: [ 40d8, 40df] > PCI: 0000:00:1f.1 reg 14 io port: [ 40ec, 40ef] > PCI: 0000:00:1f.1 reg 18 io port: [ 40d0, 40d7] > PCI: 0000:00:1f.1 reg 1c io port: [ 40e8, 40eb] > PCI: 0000:00:1f.1 reg 20 io port: [ 40b0, 40bf] > pci 0000:00.1f.1: calling pci_fixup_transparent_bridge+0x0/0x2a > PCI: Found 0000:00:1f.2 [8086/27c4] 000101 00 > PCI: 0000:00:1f.2 reg 10 io port: [ 40c8, 40cf] > PCI: 0000:00:1f.2 reg 14 io port: [ 40e4, 40e7] > PCI: 0000:00:1f.2 reg 18 io port: [ 40c0, 40c7] > PCI: 0000:00:1f.2 reg 1c io port: [ 40e0, 40e3] > PCI: 0000:00:1f.2 reg 20 io port: [ 40a0, 40af] > PCI: 0000:00:1f.2 reg 24 32bit mmio: [d8405000, d84053ff] > pci: 0000:00:1f.2 calling pci_fixup_transparent_bridge+0x0/0x2a > PCI: Found 0000:00:1f.3 [8086/27da] 000c05 00 > PCI: 0000:00:1f.3 reg 20 io port: [ efa0, efbf] > PCI: 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a > PCI: Fixups for bus 0000:00 > PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0 > PCI: Scanning bus 0000:01 > PCI: Found 0000:01:00.0 [1002/71c5] 000300 00 > PCI: 0000:00:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff] > PCI: 0000:00:01:00.0 reg 14 io port: [ 3000, 30ff] > PCI: 0000:00:01:00.0 reg 18 32bit mmio: [d8300000, d830ffff] > > Perhaps one of the PCIEASPM experts can explain why there are so > many calls to pci_fixup_transparent_bridge and a scan behind the bridge. > Nothing like that appears in the dmesg from your latest patch without > PCIEASPM. > Jack > > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > Linux version 2.6.27-0.156.rc0.git4.fc9.x86_64 (howarth@localhost.localdomain) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Fri Jul 18 22:02:40 EDT 2008 > Command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug apic=verbose initcall_debug pci=routeirq > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 00000000bf0e9000 (usable) > BIOS-e820: 00000000bf0e9000 - 00000000bf2ea000 (ACPI NVS) > BIOS-e820: 00000000bf2ea000 - 00000000bfebe000 (ACPI data) > BIOS-e820: 00000000bfebe000 - 00000000bfeef000 (ACPI NVS) > BIOS-e820: 00000000bfeef000 - 00000000bff00000 (ACPI data) > BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved) > BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) > BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > Centaur CentaurHauls > last_pfn = 0xbf0e9 max_arch_pfn = 0x3ffffffff > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > init_memory_mapping > 0000000000 - 00bf000000 page 2M > 00bf000000 - 00bf0e9000 page 4k > kernel direct mapping tables up to bf0e9000 @ 8000-d000 > last_map_addr: bf0e9000 end: bf0e9000 > RAMDISK: 37d35000 - 37fef5d1 > DMI 2.4 present. > ACPI: RSDP 000FE020, 0024 (r2 APPLE ) > ACPI: XSDT BFEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013) > ACPI: FACP BFEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F) > ACPI: DSDT BFEF0000, 48BD (r1 APPLE MacBookP 20001 INTL 20050309) > ACPI: FACS BFEC0000, 0040 > ACPI: HPET BFEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F) > ACPI: APIC BFEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F) > ACPI: MCFG BFEF8000, 003C (r1 APPLE Apple00 1 Loki 5F) > ACPI: ASF! BFEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F) > ACPI: SBST BFEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F) > ACPI: ECDT BFEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F) > ACPI: SSDT BFEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309) > ACPI: SSDT BFEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309) > ACPI: SSDT BFEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309) > ACPI: DMI detected: Apple > No NUMA configuration found > Faking a node at 0000000000000000-00000000bf0e9000 > Entering add_active_range(0, 0x0, 0x9f) 0 entries of 25600 used > Entering add_active_range(0, 0x100, 0xbf0e9) 1 entries of 25600 used > Bootmem setup node 0 0000000000000000-00000000bf0e9000 > NODE_DATA [000000000000b000 - 000000000001ffff] > bootmap [0000000000020000 - 0000000000037e1f] pages 18 > (6 early reservations) ==> bootmem > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] > #2 [0000200000 - 0000e5fe68] TEXT DATA BSS ==> [0000200000 - 0000e5fe68] > #3 [0037d35000 - 0037fef5d1] RAMDISK ==> [0037d35000 - 0037fef5d1] > #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] > #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] > Scan SMP from ffff880000000000 for 1024 bytes. > Scan SMP from ffff88000009fc00 for 1024 bytes. > Scan SMP from ffff8800000f0000 for 65536 bytes. > Scan SMP from ffff88000009fc00 for 1024 bytes. > [ffffe20000000000-ffffe200047fffff] PMD -> [ffff880001200000-ffff8800059fffff] on node 0 > Zone PFN ranges: > DMA 0x00000000 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal 0x00100000 -> 0x00100000 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000000 -> 0x0000009f > 0: 0x00000100 -> 0x000bf0e9 > On node 0 totalpages: 782472 > DMA zone: 96 pages used for memmap > DMA zone: 3269 pages reserved > DMA zone: 634 pages, LIFO batch:0 > DMA32 zone: 18246 pages used for memmap > DMA32 zone: 760227 pages, LIFO batch:31 > Normal zone: 0 pages used for memmap > Movable zone: 0 pages used for memmap > ACPI: PM-Timer IO Port: 0x408 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Setting APIC routing to flat > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > Using ACPI (MADT) for SMP configuration information > SMP: Allowing 2 CPUs, 0 hotplug CPUs > mapped APIC to ffffffffff5fc000 ( fee00000) > mapped IOAPIC to ffffffffff5fb000 (00000000fec00000) > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 > PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 > Allocating PCI resources starting at c4000000 (gap: c0000000:30000000) > PERCPU: Allocating 442304 bytes of per cpu data > NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 > Built 1 zonelists in Node order, mobility grouping on. Total pages: 760861 > Policy zone: DMA32 > Kernel command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug apic=verbose initcall_debug pci=routeirq > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Extended CMOS year: 2000 > TSC calibrated against PM_TIMER > Detected 2327.490 MHz processor. > Console: colour VGA+ 80x25 > console [tty0] enabled > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar > ... MAX_LOCKDEP_SUBCLASSES: 8 > ... MAX_LOCK_DEPTH: 48 > ... MAX_LOCKDEP_KEYS: 2048 > ... CLASSHASH_SIZE: 1024 > ... MAX_LOCKDEP_ENTRIES: 8192 > ... MAX_LOCKDEP_CHAINS: 16384 > ... CHAINHASH_SIZE: 8192 > memory used by lock dependency info: 1840 kB > per task-struct memory footprint: 3456 bytes > Checking aperture... > No AGP bridge found > Calgary: detecting Calgary via BIOS EBDA area > Calgary: Unable to locate Rio Grande table in EBDA - bailing! > Memory: 3039268k/3130276k available (3099k kernel code, 90620k reserved, 1746k data, 1544k init) > CPA: page pool initialized 48 of 48 pages preallocated > SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 > hpet clockevent registered > Calibrating delay loop (skipped), value calculated using timer frequency.. <6>4654.98 BogoMIPS (lpj=2327490) > Security Framework initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > Mount-cache hash table entries: 256 > Initializing cgroup subsys ns > Initializing cgroup subsys cpuacct > Initializing cgroup subsys devices > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 4096K > CPU 0/0 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU0: Thermal monitoring enabled (TM2) > using mwait in idle threads. > ACPI: Core revision 20080609 > enabled ExtINT on CPU#0 > ENABLING IO-APIC IRQs > init IO_APIC IRQs > IO-APIC (apicid-pin) 1-0 not connected. > IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (1-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (1-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (1-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (1-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) > IOAPIC[0]: Set routing entry (1-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (1-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (1-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (1-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) > IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected. > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06 > Using local APIC timer interrupts. > APIC timer calibration result 10390580 > Detected 10.390 MHz APIC timer. > lockdep: fixing up alternatives. > Booting processor 1/1 ip 6000 > Initializing CPU#1 > masked ExtINT on CPU#1 > Calibrating delay using timer specific routine.. <6>4654.79 BogoMIPS (lpj=2327398) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 4096K > CPU 1/1 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU1: Thermal monitoring enabled (TM2) > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06 > checking TSC synchronization [CPU#0 -> CPU#1]: passed. > Brought up 2 CPUs > Total of 2 processors activated (9309.77 BogoMIPS). > sizeof(vma)=176 bytes > sizeof(page)=96 bytes > sizeof(inode)=1088 bytes > sizeof(dentry)=256 bytes > sizeof(ext3inode)=1488 bytes > sizeof(buffer_head)=104 bytes > sizeof(skbuff)=232 bytes > sizeof(task_struct)=9528 bytes > CPU0 attaching sched-domain: > domain 0: span 0-1 level MC > groups: 0 1 > domain 1: span 0-1 level NODE > groups: 0-1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level MC > groups: 1 0 > domain 1: span 0-1 level NODE > groups: 0-1 > khelper used greatest stack depth: 5648 bytes left > calling init_cpufreq_transition_notifier_list+0x0/0x20 > initcall init_cpufreq_transition_notifier_list+0x0/0x20 returned 0 after 0 msecs > calling net_ns_init+0x0/0x134 > net_namespace: 1352 bytes > initcall net_ns_init+0x0/0x134 returned 0 after 0 msecs > calling cpufreq_tsc+0x0/0x16 > initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs > calling init_smp_flush+0x0/0x6b > initcall init_smp_flush+0x0/0x6b returned 0 after 0 msecs > calling print_banner+0x0/0x13 > Booting paravirtualized kernel on bare hardware > initcall print_banner+0x0/0x13 returned 0 after 0 msecs > calling sysctl_init+0x0/0x37 > initcall sysctl_init+0x0/0x37 returned 0 after 0 msecs > calling ksysfs_init+0x0/0xc0 > initcall ksysfs_init+0x0/0xc0 returned 0 after 0 msecs > calling init_jiffies_clocksource+0x0/0x17 > initcall init_jiffies_clocksource+0x0/0x17 returned 0 after 0 msecs > calling pm_init+0x0/0x39 > initcall pm_init+0x0/0x39 returned 0 after 0 msecs > calling pm_disk_init+0x0/0x1e > initcall pm_disk_init+0x0/0x1e returned 0 after 0 msecs > calling swsusp_header_init+0x0/0x31 > initcall swsusp_header_init+0x0/0x31 returned 0 after 0 msecs > calling ftrace_dynamic_init+0x0/0xd7 > initcall ftrace_dynamic_init+0x0/0xd7 returned 0 after 0 msecs > calling filelock_init+0x0/0x33 > initcall filelock_init+0x0/0x33 returned 0 after 0 msecs > calling init_misc_binfmt+0x0/0x44 > initcall init_misc_binfmt+0x0/0x44 returned 0 after 0 msecs > calling init_script_binfmt+0x0/0x17 > initcall init_script_binfmt+0x0/0x17 returned 0 after 0 msecs > calling init_elf_binfmt+0x0/0x17 > initcall init_elf_binfmt+0x0/0x17 returned 0 after 0 msecs > calling init_compat_elf_binfmt+0x0/0x17 > initcall init_compat_elf_binfmt+0x0/0x17 returned 0 after 0 msecs > calling debugfs_init+0x0/0x56 > initcall debugfs_init+0x0/0x56 returned 0 after 0 msecs > calling securityfs_init+0x0/0x56 > initcall securityfs_init+0x0/0x56 returned 0 after 0 msecs > calling random32_init+0x0/0x5f > initcall random32_init+0x0/0x5f returned 0 after 0 msecs > calling early_resume_init+0x0/0x1d4 > Time: 3:06:17 Date: 07/19/08 > initcall early_resume_init+0x0/0x1d4 returned 0 after 0 msecs > calling cpufreq_core_init+0x0/0x8f > initcall cpufreq_core_init+0x0/0x8f returned 0 after 0 msecs > calling cpuidle_init+0x0/0x45 > initcall cpuidle_init+0x0/0x45 returned 0 after 0 msecs > calling sock_init+0x0/0x63 > initcall sock_init+0x0/0x63 returned 0 after 0 msecs > calling netpoll_init+0x0/0x46 > initcall netpoll_init+0x0/0x46 returned 0 after 0 msecs > calling netlink_proto_init+0x0/0x150 > NET: Registered protocol family 16 > initcall netlink_proto_init+0x0/0x150 returned 0 after 0 msecs > calling bdi_class_init+0x0/0x42 > initcall bdi_class_init+0x0/0x42 returned 0 after 0 msecs > calling kobject_uevent_init+0x0/0x47 > initcall kobject_uevent_init+0x0/0x47 returned 0 after 0 msecs > calling pcibus_class_init+0x0/0x17 > initcall pcibus_class_init+0x0/0x17 returned 0 after 0 msecs > calling pci_driver_init+0x0/0x17 > initcall pci_driver_init+0x0/0x17 returned 0 after 0 msecs > calling backlight_class_init+0x0/0x4e > initcall backlight_class_init+0x0/0x4e returned 0 after 0 msecs > calling dock_init+0x0/0x5f > No dock devices found. > initcall dock_init+0x0/0x5f returned 0 after 0 msecs > calling tty_class_init+0x0/0x2f > initcall tty_class_init+0x0/0x2f returned 0 after 0 msecs > calling vtconsole_class_init+0x0/0xbf > khelper used greatest stack depth: 4904 bytes left > initcall vtconsole_class_init+0x0/0xbf returned 0 after 0 msecs > calling register_node_type+0x0/0x83 > initcall register_node_type+0x0/0x83 returned 0 after 0 msecs > calling enable_pci_io_ecs+0x0/0x33 > initcall enable_pci_io_ecs+0x0/0x33 returned 0 after 0 msecs > calling early_fill_mp_bus_info+0x0/0x80c > initcall early_fill_mp_bus_info+0x0/0x80c returned 0 after 0 msecs > calling arch_kdebugfs_init+0x0/0x1e0 > initcall arch_kdebugfs_init+0x0/0x1e0 returned 0 after 0 msecs > calling mtrr_if_init+0x0/0x7e > initcall mtrr_if_init+0x0/0x7e returned 0 after 0 msecs > calling ffh_cstate_init+0x0/0x36 > initcall ffh_cstate_init+0x0/0x36 returned 0 after 0 msecs > calling acpi_pci_init+0x0/0x45 > ACPI: bus type pci registered > initcall acpi_pci_init+0x0/0x45 returned 0 after 0 msecs > calling init_acpi_device_notify+0x0/0x50 > initcall init_acpi_device_notify+0x0/0x50 returned 0 after 0 msecs > calling dmi_id_init+0x0/0x2f1 > initcall dmi_id_init+0x0/0x2f1 returned 0 after 0 msecs > calling pci_arch_init+0x0/0x53 > PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 > PCI: MCFG area at f0000000 reserved in E820 > PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 > PCI: Using MMCONFIG at f0000000 - f3ffffff > PCI: Using configuration type 1 for base access > initcall pci_arch_init+0x0/0x53 returned 0 after 14 msecs > calling topology_init+0x0/0x96 > initcall topology_init+0x0/0x96 returned 0 after 0 msecs > calling mtrr_init_finialize+0x0/0x42 > initcall mtrr_init_finialize+0x0/0x42 returned 0 after 0 msecs > calling param_sysfs_init+0x0/0x1f3 > initcall param_sysfs_init+0x0/0x1f3 returned 0 after 9 msecs > calling pm_sysrq_init+0x0/0x1e > initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 msecs > calling readahead_init+0x0/0x3d > initcall readahead_init+0x0/0x3d returned 0 after 0 msecs > calling init_bio+0x0/0xca > initcall init_bio+0x0/0xca returned 0 after 0 msecs > calling integrity_init+0x0/0x3f > initcall integrity_init+0x0/0x3f returned 0 after 0 msecs > calling blk_settings_init+0x0/0x2f > initcall blk_settings_init+0x0/0x2f returned 0 after 0 msecs > calling blk_ioc_init+0x0/0x2f > initcall blk_ioc_init+0x0/0x2f returned 0 after 0 msecs > calling genhd_device_init+0x0/0x5a > initcall genhd_device_init+0x0/0x5a returned 0 after 0 msecs > calling blk_dev_integrity_init+0x0/0x2f > initcall blk_dev_integrity_init+0x0/0x2f returned 0 after 0 msecs > calling pci_slot_init+0x0/0x4c > initcall pci_slot_init+0x0/0x4c returned 0 after 0 msecs > calling fbmem_init+0x0/0x8f > initcall fbmem_init+0x0/0x8f returned 0 after 0 msecs > calling acpi_init+0x0/0x226 > ACPI: EC: EC description table is found, configuring boot EC > ACPI: EC: non-query interrupt received, switching to interrupt mode > ACPI: BIOS _OSI(Linux) query ignored via DMI > ACPI: Interpreter enabled > ACPI: (supports S0 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > initcall acpi_init+0x0/0x226 returned 0 after 25 msecs > calling acpi_scan_init+0x0/0x10f > initcall acpi_scan_init+0x0/0x10f returned 0 after 52 msecs > calling acpi_ec_init+0x0/0x66 > ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 > ACPI: EC: driver started in interrupt mode > initcall acpi_ec_init+0x0/0x66 returned 0 after 0 msecs > calling acpi_pci_root_init+0x0/0x2d > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > pci 0000:00:01.0: PME# disabled > PCI: 0000:00:07.0 reg 10 32bit mmio: [d8404000, d8404fff] > PCI: 0000:00:1b.0 reg 10 64bit mmio: [d8400000, d8403fff] > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1b.0: PME# disabled > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: PME# disabled > pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.1: PME# disabled > pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.2: PME# disabled > PCI: 0000:00:1d.0 reg 20 io port: [4080, 409f] > PCI: 0000:00:1d.1 reg 20 io port: [4060, 407f] > PCI: 0000:00:1d.2 reg 20 io port: [4040, 405f] > PCI: 0000:00:1d.3 reg 20 io port: [4020, 403f] > PCI: 0000:00:1d.7 reg 10 32bit mmio: [d8405400, d84057ff] > pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.7: PME# disabled > pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO > pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO > PCI: 0000:00:1f.1 reg 10 io port: [40d8, 40df] > PCI: 0000:00:1f.1 reg 14 io port: [40ec, 40ef] > PCI: 0000:00:1f.1 reg 18 io port: [40d0, 40d7] > PCI: 0000:00:1f.1 reg 1c io port: [40e8, 40eb] > PCI: 0000:00:1f.1 reg 20 io port: [40b0, 40bf] > PCI: 0000:00:1f.2 reg 10 io port: [40c8, 40cf] > PCI: 0000:00:1f.2 reg 14 io port: [40e4, 40e7] > PCI: 0000:00:1f.2 reg 18 io port: [40c0, 40c7] > PCI: 0000:00:1f.2 reg 1c io port: [40e0, 40e3] > PCI: 0000:00:1f.2 reg 20 io port: [40a0, 40af] > PCI: 0000:00:1f.2 reg 24 32bit mmio: [d8405000, d84053ff] > pci 0000:00:1f.2: PME# supported from D3hot > pci 0000:00:1f.2: PME# disabled > PCI: 0000:00:1f.3 reg 20 io port: [efa0, efbf] > PCI: 0000:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff] > PCI: 0000:01:00.0 reg 14 io port: [3000, 30ff] > PCI: 0000:01:00.0 reg 18 32bit mmio: [d8300000, d830ffff] > pci 0000:01:00.0: supports D1 > pci 0000:01:00.0: supports D2 > PCI: bridge 0000:00:01.0 io port: [3000, 3fff] > PCI: bridge 0000:00:01.0 32bit mmio: [d8300000, d83fffff] > PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff] > PCI: 0000:02:00.0 reg 10 64bit mmio: [d8200000, d8203fff] > PCI: 0000:02:00.0 reg 18 io port: [2000, 20ff] > pci 0000:02:00.0: supports D1 > pci 0000:02:00.0: supports D2 > pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:02:00.0: PME# disabled > PCI: bridge 0000:00:1c.0 io port: [2000, 2fff] > PCI: bridge 0000:00:1c.0 32bit mmio: [d8200000, d82fffff] > PCI: 0000:03:00.0 reg 10 64bit mmio: [d8100000, d810ffff] > pci 0000:03:00.0: supports D1 > pci 0000:03:00.0: PME# supported from D0 D1 D3hot > pci 0000:03:00.0: PME# disabled > PCI: bridge 0000:00:1c.1 32bit mmio: [d8100000, d81fffff] > PCI: bridge 0000:00:1c.2 io port: [1000, 1fff] > PCI: bridge 0000:00:1c.2 32bit mmio: [d4100000, d80fffff] > PCI: bridge 0000:00:1c.2 64bit mmio pref: [d0000000, d3ffffff] > PCI: 0000:0c:03.0 reg 10 32bit mmio: [d4004000, d40047ff] > PCI: 0000:0c:03.0 reg 14 32bit mmio: [d4000000, d4003fff] > pci 0000:0c:03.0: supports D1 > pci 0000:0c:03.0: supports D2 > pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot > pci 0000:0c:03.0: PME# disabled > pci 0000:00:1e.0: transparent bridge > PCI: bridge 0000:00:1e.0 32bit mmio: [d4000000, d40fffff] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > initcall acpi_pci_root_init+0x0/0x2d returned 0 after 78 msecs > calling acpi_pci_link_init+0x0/0x4d > ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) > initcall acpi_pci_link_init+0x0/0x4d returned 0 after 14 msecs > calling acpi_power_init+0x0/0x7c > initcall acpi_power_init+0x0/0x7c returned 0 after 0 msecs > calling acpi_system_init+0x0/0x265 > initcall acpi_system_init+0x0/0x265 returned 0 after 0 msecs > calling acpi_cm_sbs_init+0x0/0xd > initcall acpi_cm_sbs_init+0x0/0xd returned 0 after 0 msecs > calling pnp_init+0x0/0x25 > Linux Plug and Play Support v0.97 (c) Adam Belay > initcall pnp_init+0x0/0x25 returned 0 after 0 msecs > calling pnpacpi_init+0x0/0x91 > pnp: PnP ACPI init > ACPI: bus type pnp registered > IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) > pnp: PnP ACPI: found 9 devices > ACPI: ACPI bus type pnp unregistered > initcall pnpacpi_init+0x0/0x91 returned 0 after 20 msecs > calling misc_init+0x0/0x9d > initcall misc_init+0x0/0x9d returned 0 after 0 msecs > calling cn_init+0x0/0xf3 > initcall cn_init+0x0/0xf3 returned 0 after 0 msecs > calling init_scsi+0x0/0x96 > SCSI subsystem initialized > initcall init_scsi+0x0/0x96 returned 0 after 1 msecs > calling ata_init+0x0/0x368 > libata version 3.00 loaded. > initcall ata_init+0x0/0x368 returned 0 after 0 msecs > calling init_pcmcia_cs+0x0/0x2d > initcall init_pcmcia_cs+0x0/0x2d returned 0 after 0 msecs > calling usb_init+0x0/0x131 > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > initcall usb_init+0x0/0x131 returned 0 after 1 msecs > calling serio_init+0x0/0x8e > initcall serio_init+0x0/0x8e returned 0 after 0 msecs > calling input_init+0x0/0x10c > initcall input_init+0x0/0x10c returned 0 after 0 msecs > calling rtc_init+0x0/0x75 > initcall rtc_init+0x0/0x75 returned 0 after 0 msecs > calling power_supply_class_init+0x0/0x39 > initcall power_supply_class_init+0x0/0x39 returned 0 after 0 msecs > calling thermal_init+0x0/0x56 > initcall thermal_init+0x0/0x56 returned 0 after 0 msecs > calling md_init+0x0/0xd5 > initcall md_init+0x0/0xd5 returned 0 after 0 msecs > calling leds_init+0x0/0x2f > initcall leds_init+0x0/0x2f returned 0 after 0 msecs > calling dma_bus_init+0x0/0x31 > initcall dma_bus_init+0x0/0x31 returned 0 after 0 msecs > calling pci_subsys_init+0x0/0x126 > PCI: Using ACPI for IRQ routing > PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified > IOAPIC[0]: Set routing entry (1-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) > pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > IOAPIC[0]: Set routing entry (1-22 -> 0x51 -> IRQ 22 Mode:1 Active:1) > pci 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > IOAPIC[0]: Set routing entry (1-17 -> 0x59 -> IRQ 17 Mode:1 Active:1) > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > IOAPIC[0]: Set routing entry (1-18 -> 0x61 -> IRQ 18 Mode:1 Active:1) > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > IOAPIC[0]: Set routing entry (1-23 -> 0x69 -> IRQ 23 Mode:1 Active:1) > pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > IOAPIC[0]: Set routing entry (1-19 -> 0x71 -> IRQ 19 Mode:1 Active:1) > pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > number of MP IRQ sources: 15. > number of IO-APIC #1 registers: 24. > testing the IO APIC....................... > > IO APIC #1...... > .... register #00: 00000000 > ....... : physical APIC id: 00 > .... register #01: 00170020 > ....... : max redirection entries: 0017 > ....... : PRQ implemented: 0 > ....... : IO APIC version: 0020 > .... register #02: 00170020 > ....... : arbitration: 00 > .... IRQ redirection table: > NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: > 00 000 1 0 0 0 0 0 0 00 > 01 003 0 0 0 0 0 1 1 31 > 02 003 0 0 0 0 0 1 1 30 > 03 003 0 0 0 0 0 1 1 33 > 04 003 0 0 0 0 0 1 1 34 > 05 003 0 0 0 0 0 1 1 35 > 06 003 0 0 0 0 0 1 1 36 > 07 003 0 0 0 0 0 1 1 37 > 08 003 0 0 0 0 0 1 1 38 > 09 003 0 1 0 0 0 1 1 39 > 0a 003 0 0 0 0 0 1 1 3A > 0b 003 0 0 0 0 0 1 1 3B > 0c 003 0 0 0 0 0 1 1 3C > 0d 003 0 0 0 0 0 1 1 3D > 0e 003 0 0 0 0 0 1 1 3E > 0f 003 0 0 0 0 0 1 1 3F > 10 003 1 1 0 1 0 1 1 49 > 11 003 1 1 0 1 0 1 1 59 > 12 003 1 1 0 1 0 1 1 61 > 13 003 1 1 0 1 0 1 1 71 > 14 000 1 0 0 0 0 0 0 00 > 15 000 1 0 0 0 0 0 0 00 > 16 003 1 1 0 1 0 1 1 51 > 17 003 1 1 0 1 0 1 1 69 > IRQ to pin mappings: > IRQ0 -> 0:2 > IRQ1 -> 0:1 > IRQ3 -> 0:3 > IRQ4 -> 0:4 > IRQ5 -> 0:5 > IRQ6 -> 0:6 > IRQ7 -> 0:7 > IRQ8 -> 0:8 > IRQ9 -> 0:9 > IRQ10 -> 0:10 > IRQ11 -> 0:11 > IRQ12 -> 0:12 > IRQ13 -> 0:13 > IRQ14 -> 0:14 > IRQ15 -> 0:15 > IRQ16 -> 0:16 > IRQ17 -> 0:17 > IRQ18 -> 0:18 > IRQ19 -> 0:19 > IRQ22 -> 0:22 > IRQ23 -> 0:23 > .................................... done. > initcall pci_subsys_init+0x0/0x126 returned 0 after 21 msecs > calling proto_init+0x0/0x33 > initcall proto_init+0x0/0x33 returned 0 after 0 msecs > calling net_dev_init+0x0/0x1f3 > initcall net_dev_init+0x0/0x1f3 returned 0 after 0 msecs > calling neigh_init+0x0/0x76 > initcall neigh_init+0x0/0x76 returned 0 after 0 msecs > calling fib_rules_init+0x0/0xab > initcall fib_rules_init+0x0/0xab returned 0 after 0 msecs > calling pktsched_init+0x0/0xc9 > initcall pktsched_init+0x0/0xc9 returned 0 after 0 msecs > calling tc_filter_init+0x0/0x51 > initcall tc_filter_init+0x0/0x51 returned 0 after 0 msecs > calling tc_action_init+0x0/0x51 > initcall tc_action_init+0x0/0x51 returned 0 after 0 msecs > calling genl_init+0x0/0xdd > initcall genl_init+0x0/0xdd returned 0 after 3 msecs > calling cipso_v4_init+0x0/0x8d > initcall cipso_v4_init+0x0/0x8d returned 0 after 0 msecs > calling wireless_nlevent_init+0x0/0x46 > initcall wireless_nlevent_init+0x0/0x46 returned 0 after 0 msecs > calling netlbl_init+0x0/0x86 > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > initcall netlbl_init+0x0/0x86 returned 0 after 0 msecs > calling sysctl_init+0x0/0x32 > initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs > calling pci_iommu_init+0x0/0x21 > PCI-GART: No AMD northbridge found. > initcall pci_iommu_init+0x0/0x21 returned 0 after 0 msecs > calling hpet_late_init+0x0/0x107 > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > hpet0: 3 64-bit timers, 14318180 Hz > initcall hpet_late_init+0x0/0x107 returned 0 after 1 msecs > calling clocksource_done_booting+0x0/0x17 > initcall clocksource_done_booting+0x0/0x17 returned 0 after 0 msecs > calling ftrace_init_debugfs+0x0/0xfd > initcall ftrace_init_debugfs+0x0/0xfd returned 0 after 0 msecs > calling tracer_alloc_buffers+0x0/0x5a1 > tracer: 1286 pages allocated for 65536 entries of 80 bytes > actual entries 65586 > initcall tracer_alloc_buffers+0x0/0x5a1 returned 0 after 19 msecs > calling init_pipe_fs+0x0/0x51 > initcall init_pipe_fs+0x0/0x51 returned 0 after 0 msecs > calling init_mnt_writers+0x0/0x95 > initcall init_mnt_writers+0x0/0x95 returned 0 after 0 msecs > calling eventpoll_init+0x0/0x9a > initcall eventpoll_init+0x0/0x9a returned 0 after 0 msecs > calling anon_inode_init+0x0/0x11c > initcall anon_inode_init+0x0/0x11c returned 0 after 0 msecs > calling acpi_rtc_init+0x0/0xf9 > ACPI: RTC can wake from S4 > initcall acpi_rtc_init+0x0/0xf9 returned 0 after 0 msecs > calling acpi_event_init+0x0/0x85 > initcall acpi_event_init+0x0/0x85 returned 0 after 2 msecs > calling pnp_system_init+0x0/0x17 > system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved > system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved > system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved > system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved > system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved > system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved > system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved > system 00:07: ioport range 0x680-0x6ef has been reserved > system 00:07: ioport range 0x800-0x80f has been reserved > system 00:07: ioport range 0x810-0x817 has been reserved > system 00:07: ioport range 0x400-0x47f has been reserved > system 00:07: ioport range 0x500-0x53f has been reserved > system 00:07: ioport range 0x1640-0x164f has been reserved > initcall pnp_system_init+0x0/0x17 returned 0 after 2 msecs > calling chr_dev_init+0x0/0x9d > initcall chr_dev_init+0x0/0x9d returned 0 after 2 msecs > calling firmware_class_init+0x0/0x77 > initcall firmware_class_init+0x0/0x77 returned 0 after 0 msecs > calling loopback_init+0x0/0x17 > initcall loopback_init+0x0/0x17 returned 0 after 1 msecs > calling init_pcmcia_bus+0x0/0x89 > initcall init_pcmcia_bus+0x0/0x89 returned 0 after 0 msecs > calling cpufreq_gov_performance_init+0x0/0x17 > initcall cpufreq_gov_performance_init+0x0/0x17 returned 0 after 0 msecs > calling cpufreq_gov_userspace_init+0x0/0x17 > initcall cpufreq_gov_userspace_init+0x0/0x17 returned 0 after 0 msecs > calling init_acpi_pm_clocksource+0x0/0xae > initcall init_acpi_pm_clocksource+0x0/0xae returned 0 after 0 msecs > calling pcibios_assign_resources+0x0/0x8d > pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:01.0: IO window: 0x3000-0x3fff > pci 0000:00:01.0: MEM window: 0xd8300000-0xd83fffff > pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff > pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 > pci 0000:00:1c.0: IO window: 0x2000-0x2fff > pci 0000:00:1c.0: MEM window: 0xd8200000-0xd82fffff > pci 0000:00:1c.0: PREFETCH window: 0x000000d8500000-0x000000d85fffff > pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 > pci 0000:00:1c.1: IO window: disabled > pci 0000:00:1c.1: MEM window: 0xd8100000-0xd81fffff > pci 0000:00:1c.1: PREFETCH window: disabled > pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 > Switched to high resolution mode on CPU 1 > Switched to high resolution mode on CPU 0 > pci 0000:00:1c.2: IO window: 0x1000-0x1fff > pci 0000:00:1c.2: MEM window: 0xd4100000-0xd80fffff > pci 0000:00:1c.2: PREFETCH window: 0x000000d0000000-0x000000d3ffffff > pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c > pci 0000:00:1e.0: IO window: disabled > pci 0000:00:1e.0: MEM window: 0xd4000000-0xd40fffff > pci 0000:00:1e.0: PREFETCH window: disabled > pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1c.2 to 64 > pci 0000:00:1e.0: power state changed by ACPI to D0 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > bus: 00 index 0 io port: [0, ffff] > bus: 00 index 1 mmio: [0, ffffffffffffffff] > bus: 01 index 0 io port: [3000, 3fff] > bus: 01 index 1 mmio: [d8300000, d83fffff] > bus: 01 index 2 mmio: [c0000000, cfffffff] > bus: 01 index 3 mmio: [0, 0] > bus: 02 index 0 io port: [2000, 2fff] > bus: 02 index 1 mmio: [d8200000, d82fffff] > bus: 02 index 2 mmio: [d8500000, d85fffff] > bus: 02 index 3 mmio: [0, 0] > bus: 03 index 0 mmio: [0, 0] > bus: 03 index 1 mmio: [d8100000, d81fffff] > bus: 03 index 2 mmio: [0, 0] > bus: 03 index 3 mmio: [0, 0] > bus: 04 index 0 io port: [1000, 1fff] > bus: 04 index 1 mmio: [d4100000, d80fffff] > bus: 04 index 2 mmio: [d0000000, d3ffffff] > bus: 04 index 3 mmio: [0, 0] > bus: 0c index 0 mmio: [0, 0] > bus: 0c index 1 mmio: [d4000000, d40fffff] > bus: 0c index 2 mmio: [0, 0] > bus: 0c index 3 io port: [0, ffff] > bus: 0c index 4 mmio: [0, ffffffffffffffff] > initcall pcibios_assign_resources+0x0/0x8d returned 0 after 10 msecs > calling inet_init+0x0/0x354 > NET: Registered protocol family 2 > IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) > TCP established hash table entries: 524288 (order: 11, 8388608 bytes) > TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) > TCP: Hash tables configured (established 524288 bind 65536) > TCP reno registered > initcall inet_init+0x0/0x354 returned 0 after 39 msecs > calling af_unix_init+0x0/0x5a > NET: Registered protocol family 1 > initcall af_unix_init+0x0/0x5a returned 0 after 0 msecs > calling populate_rootfs+0x0/0xf3 > checking if image is initramfs... it is > debug: unmapping init memory ffff880037d35000..ffff880037ff0000 > initcall populate_rootfs+0x0/0xf3 returned 0 after 262 msecs > calling calgary_fixup_tce_spaces+0x0/0xfe > initcall calgary_fixup_tce_spaces+0x0/0xfe returned -19 after 0 msecs > calling i8259A_init_sysfs+0x0/0x27 > initcall i8259A_init_sysfs+0x0/0x27 returned 0 after 0 msecs > calling vsyscall_init+0x0/0x71 > initcall vsyscall_init+0x0/0x71 returned 0 after 0 msecs > calling sbf_init+0x0/0xf4 > initcall sbf_init+0x0/0xf4 returned 0 after 0 msecs > calling i8237A_init_sysfs+0x0/0x27 > initcall i8237A_init_sysfs+0x0/0x27 returned 0 after 0 msecs > calling add_rtc_cmos+0x0/0x1d > initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs > calling cache_sysfs_init+0x0/0x62 > initcall cache_sysfs_init+0x0/0x62 returned 0 after 2 msecs > calling mce_init_device+0x0/0x8a > initcall mce_init_device+0x0/0x8a returned 0 after 1 msecs > calling periodic_mcheck_init+0x0/0x44 > initcall periodic_mcheck_init+0x0/0x44 returned 0 after 0 msecs > calling thermal_throttle_init_device+0x0/0x92 > initcall thermal_throttle_init_device+0x0/0x92 returned 0 after 0 msecs > calling threshold_init_device+0x0/0x4e > initcall threshold_init_device+0x0/0x4e returned 0 after 0 msecs > calling msr_init+0x0/0x124 > initcall msr_init+0x0/0x124 returned 0 after 0 msecs > calling cpuid_init+0x0/0x124 > initcall cpuid_init+0x0/0x124 returned 0 after 0 msecs > calling init_lapic_sysfs+0x0/0x32 > initcall init_lapic_sysfs+0x0/0x32 returned 0 after 0 msecs > calling ioapic_init_sysfs+0x0/0xac > initcall ioapic_init_sysfs+0x0/0xac returned 0 after 0 msecs > calling add_pcspkr+0x0/0x45 > initcall add_pcspkr+0x0/0x45 returned 0 after 0 msecs > calling uv_ptc_init+0x0/0x7a > initcall uv_ptc_init+0x0/0x7a returned 0 after 0 msecs > calling uv_bau_init+0x0/0x604 > initcall uv_bau_init+0x0/0x604 returned 0 after 0 msecs > calling audit_classes_init+0x0/0xb4 > initcall audit_classes_init+0x0/0xb4 returned 0 after 0 msecs > calling debug_pagealloc_proc_init+0x0/0x30 > initcall debug_pagealloc_proc_init+0x0/0x30 returned 0 after 0 msecs > calling pt_dump_init+0x0/0x30 > initcall pt_dump_init+0x0/0x30 returned 0 after 0 msecs > calling init_vdso_vars+0x0/0x219 > initcall init_vdso_vars+0x0/0x219 returned 0 after 0 msecs > calling ia32_binfmt_init+0x0/0x19 > initcall ia32_binfmt_init+0x0/0x19 returned 0 after 0 msecs > calling sysenter_setup+0x0/0x2ad > initcall sysenter_setup+0x0/0x2ad returned 0 after 0 msecs > calling init_sched_debug_procfs+0x0/0x2c > initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 msecs > calling create_proc_profile+0x0/0x2cf > initcall create_proc_profile+0x0/0x2cf returned 0 after 0 msecs > calling ioresources_init+0x0/0x41 > initcall ioresources_init+0x0/0x41 returned 0 after 0 msecs > calling uid_cache_init+0x0/0x92 > initcall uid_cache_init+0x0/0x92 returned 0 after 0 msecs > calling init_posix_timers+0x0/0xa0 > initcall init_posix_timers+0x0/0xa0 returned 0 after 0 msecs > calling init_posix_cpu_timers+0x0/0xb5 > initcall init_posix_cpu_timers+0x0/0xb5 returned 0 after 0 msecs > calling nsproxy_cache_init+0x0/0x32 > initcall nsproxy_cache_init+0x0/0x32 returned 0 after 0 msecs > calling timekeeping_init_device+0x0/0x27 > initcall timekeeping_init_device+0x0/0x27 returned 0 after 0 msecs > calling init_clocksource_sysfs+0x0/0x55 > initcall init_clocksource_sysfs+0x0/0x55 returned 0 after 0 msecs > calling init_timer_list_procfs+0x0/0x31 > initcall init_timer_list_procfs+0x0/0x31 returned 0 after 0 msecs > calling init_tstats_procfs+0x0/0x31 > initcall init_tstats_procfs+0x0/0x31 returned 0 after 0 msecs > calling lockdep_proc_init+0x0/0x7c > initcall lockdep_proc_init+0x0/0x7c returned 0 after 0 msecs > calling futex_init+0x0/0xcc > initcall futex_init+0x0/0xcc returned 0 after 0 msecs > calling proc_dma_init+0x0/0x27 > initcall proc_dma_init+0x0/0x27 returned 0 after 0 msecs > calling percpu_modinit+0x0/0x79 > initcall percpu_modinit+0x0/0x79 returned 0 after 0 msecs > calling kallsyms_init+0x0/0x2a > initcall kallsyms_init+0x0/0x2a returned 0 after 0 msecs > calling snapshot_device_init+0x0/0x17 > initcall snapshot_device_init+0x0/0x17 returned 0 after 0 msecs > calling crash_save_vmcoreinfo_init+0x0/0x430 > initcall crash_save_vmcoreinfo_init+0x0/0x430 returned 0 after 0 msecs > calling crash_notes_memory_init+0x0/0x44 > initcall crash_notes_memory_init+0x0/0x44 returned 0 after 0 msecs > calling pid_namespaces_init+0x0/0x32 > initcall pid_namespaces_init+0x0/0x32 returned 0 after 0 msecs > calling audit_init+0x0/0x172 > audit: initializing netlink socket (disabled) > type=2000 audit(1216436777.860:1): initialized > initcall audit_init+0x0/0x172 returned 0 after 0 msecs > calling audit_tree_init+0x0/0x4e > initcall audit_tree_init+0x0/0x4e returned 0 after 0 msecs > calling init_kprobes+0x0/0x124 > initcall init_kprobes+0x0/0x124 returned 0 after 4 msecs > calling relay_init+0x0/0x19 > initcall relay_init+0x0/0x19 returned 0 after 0 msecs > calling utsname_sysctl_init+0x0/0x19 > initcall utsname_sysctl_init+0x0/0x19 returned 0 after 0 msecs > calling init_lstats_procfs+0x0/0x2a > initcall init_lstats_procfs+0x0/0x2a returned 0 after 0 msecs > calling init_sched_switch_trace+0x0/0x41 > initcall init_sched_switch_trace+0x0/0x41 returned 0 after 0 msecs > calling init_stack_trace+0x0/0x12 > initcall init_stack_trace+0x0/0x12 returned 0 after 0 msecs > calling init_function_trace+0x0/0x12 > initcall init_function_trace+0x0/0x12 returned 0 after 0 msecs > calling init_irqsoff_tracer+0x0/0x14 > initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 0 msecs > calling init_wakeup_tracer+0x0/0x12 > initcall init_wakeup_tracer+0x0/0x12 returned 0 after 0 msecs > calling init_per_zone_pages_min+0x0/0x46 > initcall init_per_zone_pages_min+0x0/0x46 returned 0 after 0 msecs > calling pdflush_init+0x0/0x17 > initcall pdflush_init+0x0/0x17 returned 0 after 0 msecs > calling kswapd_init+0x0/0x7d > initcall kswapd_init+0x0/0x7d returned 0 after 0 msecs > calling setup_vmstat+0x0/0x4f > initcall setup_vmstat+0x0/0x4f returned 0 after 0 msecs > calling procswaps_init+0x0/0x27 > initcall procswaps_init+0x0/0x27 returned 0 after 0 msecs > calling hugetlb_init+0x0/0xa0 > Total HugeTLB memory allocated, 0 > initcall hugetlb_init+0x0/0xa0 returned 0 after 0 msecs > calling init_tmpfs+0x0/0xdf > initcall init_tmpfs+0x0/0xdf returned 0 after 0 msecs > calling slab_sysfs_init+0x0/0xf5 > initcall slab_sysfs_init+0x0/0xf5 returned 0 after 30 msecs > calling fasync_init+0x0/0x2f > initcall fasync_init+0x0/0x2f returned 0 after 0 msecs > calling aio_setup+0x0/0x78 > initcall aio_setup+0x0/0x78 returned 0 after 0 msecs > calling inotify_setup+0x0/0x17 > initcall inotify_setup+0x0/0x17 returned 0 after 0 msecs > calling inotify_user_setup+0x0/0xbd > initcall inotify_user_setup+0x0/0xbd returned 0 after 0 msecs > calling init_sys32_ioctl+0x0/0x8a > initcall init_sys32_ioctl+0x0/0x8a returned 0 after 0 msecs > calling dquot_init+0x0/0x108 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > initcall dquot_init+0x0/0x108 returned 0 after 0 msecs > calling init_v2_quota_format+0x0/0x17 > initcall init_v2_quota_format+0x0/0x17 returned 0 after 0 msecs > calling dnotify_init+0x0/0x2f > initcall dnotify_init+0x0/0x2f returned 0 after 0 msecs > calling vmcore_init+0x0/0x860 > initcall vmcore_init+0x0/0x860 returned 0 after 0 msecs > calling init_devpts_fs+0x0/0x44 > initcall init_devpts_fs+0x0/0x44 returned 0 after 0 msecs > calling init_ramfs_fs+0x0/0x17 > initcall init_ramfs_fs+0x0/0x17 returned 0 after 0 msecs > calling init_hugetlbfs_fs+0x0/0x9d > initcall init_hugetlbfs_fs+0x0/0x9d returned 0 after 0 msecs > calling init_iso9660_fs+0x0/0x76 > initcall init_iso9660_fs+0x0/0x76 returned 0 after 0 msecs > calling init_nls_cp437+0x0/0x17 > initcall init_nls_cp437+0x0/0x17 returned 0 after 0 msecs > calling init_nls_ascii+0x0/0x17 > initcall init_nls_ascii+0x0/0x17 returned 0 after 0 msecs > calling ipc_init+0x0/0x28 > msgmni has been set to 5936 > initcall ipc_init+0x0/0x28 returned 0 after 0 msecs > calling ipc_sysctl_init+0x0/0x19 > initcall ipc_sysctl_init+0x0/0x19 returned 0 after 0 msecs > calling init_mqueue_fs+0x0/0xdb > initcall init_mqueue_fs+0x0/0xdb returned 0 after 0 msecs > calling key_proc_init+0x0/0x5e > initcall key_proc_init+0x0/0x5e returned 0 after 0 msecs > calling selinux_nf_ip_init+0x0/0x7f > SELinux: Registering netfilter hooks > initcall selinux_nf_ip_init+0x0/0x7f returned 0 after 0 msecs > calling init_sel_fs+0x0/0x6d > initcall init_sel_fs+0x0/0x6d returned 0 after 1 msecs > calling selnl_init+0x0/0x52 > initcall selnl_init+0x0/0x52 returned 0 after 0 msecs > calling sel_netif_init+0x0/0x6b > initcall sel_netif_init+0x0/0x6b returned 0 after 0 msecs > calling sel_netnode_init+0x0/0x78 > initcall sel_netnode_init+0x0/0x78 returned 0 after 0 msecs > calling sel_netport_init+0x0/0x78 > initcall sel_netport_init+0x0/0x78 returned 0 after 0 msecs > calling aurule_init+0x0/0x3c > initcall aurule_init+0x0/0x3c returned 0 after 0 msecs > calling crypto_algapi_init+0x0/0x12 > initcall crypto_algapi_init+0x0/0x12 returned 0 after 0 msecs > calling cryptomgr_init+0x0/0x17 > initcall cryptomgr_init+0x0/0x17 returned 0 after 0 msecs > calling hmac_module_init+0x0/0x17 > initcall hmac_module_init+0x0/0x17 returned 0 after 0 msecs > calling md5_mod_init+0x0/0x17 > initcall md5_mod_init+0x0/0x17 returned 0 after 0 msecs > calling sha1_generic_mod_init+0x0/0x17 > initcall sha1_generic_mod_init+0x0/0x17 returned 0 after 0 msecs > calling bsg_init+0x0/0x128 > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) > initcall bsg_init+0x0/0x128 returned 0 after 0 msecs > calling noop_init+0x0/0x19 > io scheduler noop registered > initcall noop_init+0x0/0x19 returned 0 after 0 msecs > calling as_init+0x0/0x19 > io scheduler anticipatory registered > initcall as_init+0x0/0x19 returned 0 after 0 msecs > calling deadline_init+0x0/0x19 > io scheduler deadline registered > initcall deadline_init+0x0/0x19 returned 0 after 0 msecs > calling cfq_init+0x0/0x99 > io scheduler cfq registered (default) > initcall cfq_init+0x0/0x99 returned 0 after 0 msecs > calling debug_objects_init_debugfs+0x0/0x64 > initcall debug_objects_init_debugfs+0x0/0x64 returned 0 after 0 msecs > calling percpu_counter_startup+0x0/0x14 > initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs > calling pci_init+0x0/0x3a > pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1010 > pci 0000:00:1d.0: Performing full reset > pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 > pci 0000:00:1d.1: Performing full reset > pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 > pci 0000:00:1d.2: Performing full reset > pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 > pci 0000:00:1d.3: Performing full reset > pci 0000:01:00.0: Boot video device > initcall pci_init+0x0/0x3a returned 0 after 1 msecs > calling pci_proc_init+0x0/0x70 > initcall pci_proc_init+0x0/0x70 returned 0 after 0 msecs > calling pcie_portdrv_init+0x0/0x52 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > pcieport-driver 0000:00:01.0: found MSI capability > pci_express 0000:00:01.0:pcie00: allocate port service > pci_express 0000:00:01.0:pcie03: allocate port service > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > pcieport-driver 0000:00:1c.0: found MSI capability > pci_express 0000:00:1c.0:pcie00: allocate port service > pci_express 0000:00:1c.0:pcie02: allocate port service > pci_express 0000:00:1c.0:pcie03: allocate port service > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > pcieport-driver 0000:00:1c.1: found MSI capability > pci_express 0000:00:1c.1:pcie00: allocate port service > pci_express 0000:00:1c.1:pcie02: allocate port service > pci_express 0000:00:1c.1:pcie03: allocate port service > PCI: Setting latency timer of device 0000:00:1c.2 to 64 > pcieport-driver 0000:00:1c.2: found MSI capability > pci_express 0000:00:1c.2:pcie00: allocate port service > pci_express 0000:00:1c.2:pcie02: allocate port service > pci_express 0000:00:1c.2:pcie03: allocate port service > initcall pcie_portdrv_init+0x0/0x52 returned 0 after 7 msecs > calling aer_service_init+0x0/0x25 > initcall aer_service_init+0x0/0x25 returned 0 after 0 msecs > calling pci_hotplug_init+0x0/0x22 > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > initcall pci_hotplug_init+0x0/0x22 returned 0 after 0 msecs > calling fb_console_init+0x0/0x12b > initcall fb_console_init+0x0/0x12b returned 0 after 0 msecs > calling vesafb_init+0x0/0x23f > initcall vesafb_init+0x0/0x23f returned 0 after 0 msecs > calling efifb_init+0x0/0x1f2 > initcall efifb_init+0x0/0x1f2 returned -19 after 0 msecs > calling acpi_reserve_resources+0x0/0xf0 > initcall acpi_reserve_resources+0x0/0xf0 returned 0 after 0 msecs > calling acpi_button_init+0x0/0x63 > input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > ACPI: Power Button (FF) [PWRF] > input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 > ACPI: Lid Switch [LID0] > input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 > ACPI: Power Button (CM) [PWRB] > input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 > ACPI: Sleep Button (CM) [SLPB] > initcall acpi_button_init+0x0/0x63 returned 0 after 4 msecs > calling acpi_fan_init+0x0/0x63 > initcall acpi_fan_init+0x0/0x63 returned 0 after 0 msecs > calling irqrouter_init_sysfs+0x0/0x3d > initcall irqrouter_init_sysfs+0x0/0x3d returned 0 after 0 msecs > calling acpi_processor_init+0x0/0x10f > ACPI: SSDT BFEB8A90, 02F0 (r1 APPLE Cpu0Ist 3000 INTL 20050309) > ACPI: SSDT BFEB6C10, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309) > Monitor-Mwait will be used to enter C-1 state > Monitor-Mwait will be used to enter C-2 state > Monitor-Mwait will be used to enter C-3 state > ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > ACPI: ACPI0007:00 is registered as cooling_device0 > ACPI: Processor [CPU0] (supports 8 throttling states) > ACPI: SSDT BFEB7F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309) > ACPI: SSDT BFEB6F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309) > ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) > ACPI: ACPI0007:01 is registered as cooling_device1 > ACPI: Processor [CPU1] (supports 8 throttling states) > initcall acpi_processor_init+0x0/0x10f returned 0 after 22 msecs > calling acpi_container_init+0x0/0x47 > initcall acpi_container_init+0x0/0x47 returned 0 after 17 msecs > calling acpi_thermal_init+0x0/0x88 > initcall acpi_thermal_init+0x0/0x88 returned 0 after 0 msecs > calling rand_initialize+0x0/0x31 > initcall rand_initialize+0x0/0x31 returned 0 after 0 msecs > calling tty_init+0x0/0x1ca > initcall tty_init+0x0/0x1ca returned 0 after 29 msecs > calling pty_init+0x0/0x278 > initcall pty_init+0x0/0x278 returned 0 after 0 msecs > calling hpet_init+0x0/0x6f > hpet_resources: 0xfed00000 is busy > initcall hpet_init+0x0/0x6f returned 0 after 1 msecs > calling nvram_init+0x0/0x8f > Non-volatile memory driver v1.2 > initcall nvram_init+0x0/0x8f returned 0 after 0 msecs > calling agp_init+0x0/0x2b > Linux agpgart interface v0.103 > initcall agp_init+0x0/0x2b returned 0 after 0 msecs > calling agp_intel_init+0x0/0x2e > initcall agp_intel_init+0x0/0x2e returned 0 after 0 msecs > calling agp_sis_init+0x0/0x2e > initcall agp_sis_init+0x0/0x2e returned 0 after 0 msecs > calling agp_via_init+0x0/0x2e > initcall agp_via_init+0x0/0x2e returned 0 after 0 msecs > calling cn_proc_init+0x0/0x42 > initcall cn_proc_init+0x0/0x42 returned 0 after 0 msecs > calling serial8250_init+0x0/0x148 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > initcall serial8250_init+0x0/0x148 returned 0 after 2 msecs > calling serial8250_pnp_init+0x0/0x17 > initcall serial8250_pnp_init+0x0/0x17 returned 0 after 0 msecs > calling serial8250_pci_init+0x0/0x20 > initcall serial8250_pci_init+0x0/0x20 returned 0 after 0 msecs > calling init_kgdboc+0x0/0x1b > initcall init_kgdboc+0x0/0x1b returned 0 after 0 msecs > calling topology_sysfs_init+0x0/0x5e > initcall topology_sysfs_init+0x0/0x5e returned 0 after 0 msecs > calling brd_init+0x0/0x172 > brd: module loaded > initcall brd_init+0x0/0x172 returned 0 after 11 msecs > calling init_kgdbts+0x0/0x1b > initcall init_kgdbts+0x0/0x1b returned 0 after 0 msecs > calling net_olddevs_init+0x0/0xa3 > initcall net_olddevs_init+0x0/0xa3 returned 0 after 0 msecs > calling mac_hid_init+0x0/0xd7 > input: Macintosh mouse button emulation as /devices/virtual/input/input4 > initcall mac_hid_init+0x0/0xd7 returned 0 after 0 msecs > calling init_sd+0x0/0xfd > Driver 'sd' needs updating - please use bus_type methods > initcall init_sd+0x0/0xfd returned 0 after 0 msecs > calling init_sg+0x0/0x145 > initcall init_sg+0x0/0x145 returned 0 after 0 msecs > calling nonstatic_sysfs_init+0x0/0x17 > initcall nonstatic_sysfs_init+0x0/0x17 returned 0 after 0 msecs > calling yenta_socket_init+0x0/0x20 > initcall yenta_socket_init+0x0/0x20 returned 0 after 0 msecs > calling mon_init+0x0/0x11c > initcall mon_init+0x0/0x11c returned 0 after 0 msecs > calling i8042_init+0x0/0x371 > PNP: No PS/2 controller found. Probing ports directly. > i8042.c: No controller found. > initcall i8042_init+0x0/0x371 returned -19 after 2 msecs > calling serport_init+0x0/0x39 > initcall serport_init+0x0/0x39 returned 0 after 0 msecs > calling mousedev_init+0x0/0x67 > mice: PS/2 mouse device common for all mice > initcall mousedev_init+0x0/0x67 returned 0 after 4 msecs > calling evdev_init+0x0/0x17 > initcall evdev_init+0x0/0x17 returned 0 after 21 msecs > calling atkbd_init+0x0/0x2c > initcall atkbd_init+0x0/0x2c returned 0 after 0 msecs > calling psmouse_init+0x0/0x78 > initcall psmouse_init+0x0/0x78 returned 0 after 0 msecs > calling cmos_init+0x0/0x35 > rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month, y3k > initcall cmos_init+0x0/0x35 returned 0 after 1 msecs > calling init_ladder+0x0/0x17 > cpuidle: using governor ladder > initcall init_ladder+0x0/0x17 returned 0 after 2 msecs > calling init_menu+0x0/0x17 > cpuidle: using governor menu > initcall init_menu+0x0/0x17 returned 0 after 4 msecs > calling efivars_init+0x0/0x1f5 > initcall efivars_init+0x0/0x1f5 returned -19 after 0 msecs > calling hid_init+0x0/0x10 > initcall hid_init+0x0/0x10 returned 0 after 0 msecs > calling hid_init+0x0/0x67 > Marking TSC unstable due to TSC halts in idle > usbcore: registered new interface driver hiddev > usbcore: registered new interface driver usbhid > usbhid: v2.6:USB HID core driver > initcall hid_init+0x0/0x67 returned 0 after 1 msecs > calling sysctl_core_init+0x0/0x17 > initcall sysctl_core_init+0x0/0x17 returned 0 after 0 msecs > calling flow_cache_init+0x0/0x1ca > initcall flow_cache_init+0x0/0x1ca returned 0 after 0 msecs > calling llc_init+0x0/0x25 > initcall llc_init+0x0/0x25 returned 0 after 0 msecs > calling snap_init+0x0/0x36 > initcall snap_init+0x0/0x36 returned 0 after 0 msecs > calling rif_init+0x0/0x9a > initcall rif_init+0x0/0x9a returned 0 after 0 msecs > calling blackhole_module_init+0x0/0x17 > initcall blackhole_module_init+0x0/0x17 returned 0 after 0 msecs > calling sysctl_ipv4_init+0x0/0x53 > initcall sysctl_ipv4_init+0x0/0x53 returned 0 after 1 msecs > calling init_syncookies+0x0/0x1e > initcall init_syncookies+0x0/0x1e returned 0 after 0 msecs > calling ipv4_netfilter_init+0x0/0x17 > initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 0 msecs > calling cubictcp_register+0x0/0x6a > TCP cubic registered > initcall cubictcp_register+0x0/0x6a returned 0 after 0 msecs > calling xfrm_user_init+0x0/0x5e > Initializing XFRM netlink socket > initcall xfrm_user_init+0x0/0x5e returned 0 after 0 msecs > calling packet_init+0x0/0x4c > NET: Registered protocol family 17 > initcall packet_init+0x0/0x4c returned 0 after 0 msecs > calling hpet_insert_resource+0x0/0x28 > initcall hpet_insert_resource+0x0/0x28 returned 0 after 0 msecs > calling update_mp_table+0x0/0x61b > initcall update_mp_table+0x0/0x61b returned 0 after 0 msecs > calling lapic_insert_resource+0x0/0x45 > initcall lapic_insert_resource+0x0/0x45 returned 0 after 0 msecs > calling init_lapic_nmi_sysfs+0x0/0x3d > initcall init_lapic_nmi_sysfs+0x0/0x3d returned 0 after 0 msecs > calling ioapic_insert_resources+0x0/0x54 > initcall ioapic_insert_resources+0x0/0x54 returned 0 after 0 msecs > calling check_early_ioremap_leak+0x0/0x49 > initcall check_early_ioremap_leak+0x0/0x49 returned 0 after 0 msecs > calling sched_init_debug+0x0/0x24 > initcall sched_init_debug+0x0/0x24 returned 0 after 0 msecs > calling init_oops_id+0x0/0x28 > initcall init_oops_id+0x0/0x28 returned 0 after 0 msecs > calling disable_boot_consoles+0x0/0x3f > initcall disable_boot_consoles+0x0/0x3f returned 0 after 0 msecs > calling pm_qos_power_init+0x0/0xcf > initcall pm_qos_power_init+0x0/0xcf returned 0 after 0 msecs > calling software_resume+0x0/0x1ba > initcall software_resume+0x0/0x1ba returned -2 after 0 msecs > initcall software_resume+0x0/0x1ba returned with error code -2 > calling debugfs_kprobe_init+0x0/0x8e > initcall debugfs_kprobe_init+0x0/0x8e returned 0 after 0 msecs > calling taskstats_init+0x0/0x9a > registered taskstats version 1 > initcall taskstats_init+0x0/0x9a returned 0 after 0 msecs > calling fail_page_alloc_debugfs+0x0/0xe9 > initcall fail_page_alloc_debugfs+0x0/0xe9 returned 0 after 0 msecs > calling fail_make_request_debugfs+0x0/0x1e > initcall fail_make_request_debugfs+0x0/0x1e returned 0 after 0 msecs > calling random32_reseed+0x0/0x7e > initcall random32_reseed+0x0/0x7e returned 0 after 0 msecs > calling pci_sysfs_init+0x0/0x51 > initcall pci_sysfs_init+0x0/0x51 returned 0 after 0 msecs > calling acpi_wakeup_device_init+0x0/0xb6 > initcall acpi_wakeup_device_init+0x0/0xb6 returned 0 after 0 msecs > calling acpi_sleep_proc_init+0x0/0x5a > initcall acpi_sleep_proc_init+0x0/0x5a returned 0 after 0 msecs > calling seqgen_init+0x0/0x14 > initcall seqgen_init+0x0/0x14 returned 0 after 0 msecs > calling late_resume_init+0x0/0x112 > Magic number: 0:812:108 > initcall late_resume_init+0x0/0x112 returned 0 after 0 msecs > calling scsi_complete_async_scans+0x0/0xf4 > initcall scsi_complete_async_scans+0x0/0xf4 returned 0 after 0 msecs > calling memmap_init+0x0/0x9d > initcall memmap_init+0x0/0x9d returned 0 after 0 msecs > calling pci_mmcfg_late_insert_resources+0x0/0x48 > initcall pci_mmcfg_late_insert_resources+0x0/0x48 returned 0 after 0 msecs > calling tcp_congestion_default+0x0/0x17 > initcall tcp_congestion_default+0x0/0x17 returned 0 after 0 msecs > debug: unmapping init memory ffffffff814eb000..ffffffff8166d000 > Write protecting the kernel read-only data: 1368k > ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > drivers/usb/core/inode.c: creating file 'devices' > drivers/usb/core/inode.c: creating file '001' > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 > ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr > ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT > ehci_hcd 0000:00:1d.7: debug port 1 > ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > ehci_hcd 0000:00:1d.7: supports USB remote wakeup > ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8405400 > ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT > ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: default language 0x0409 > usb usb1: uevent > usb usb1: usb_probe_device > usb usb1: configuration #1 chosen from 1 choice > usb usb1: adding 1-0:1.0 (config #1, interface 0) > usb 1-0:1.0: uevent > hub 1-0:1.0: usb_probe_interface > hub 1-0:1.0: usb_probe_interface - got id > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > hub 1-0:1.0: standalone hub > hub 1-0:1.0: no power switching (usb 1.0) > hub 1-0:1.0: individual port over-current protection > hub 1-0:1.0: power on to power good time: 20ms > hub 1-0:1.0: local power source is good > hub 1-0:1.0: trying to enable port power on non-switchable hub > Clocksource tsc unstable (delta = -305979950 ns) > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 > drivers/usb/core/inode.c: creating file '001' > ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 ehci_hcd > usb usb1: SerialNumber: 0000:00:1d.7 > hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s > modprobe used greatest stack depth: 3792 bytes left > ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver > ohci_hcd: block sizes: ed 80 td 96 > USB Universal Host Controller Interface driver v3.0 > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > drivers/usb/core/inode.c: creating file '002' > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: detected 2 ports > uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 > uhci_hcd 0000:00:1d.0: Performing full reset > uhci_hcd 0000:00:1d.0: supports USB remote wakeup > uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 > usb usb2: default language 0x0409 > usb usb2: uevent > usb usb2: usb_probe_device > usb usb2: configuration #1 chosen from 1 choice > usb usb2: adding 2-0:1.0 (config #1, interface 0) > usb 2-0:1.0: uevent > hub 2-0:1.0: usb_probe_interface > hub 2-0:1.0: usb_probe_interface - got id > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > hub 2-0:1.0: standalone hub > hub 2-0:1.0: no power switching (usb 1.0) > hub 2-0:1.0: individual port over-current protection > hub 2-0:1.0: power on to power good time: 2ms > hub 2-0:1.0: local power source is good > hub 2-0:1.0: trying to enable port power on non-switchable hub > hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 > drivers/usb/core/inode.c: creating file '001' > usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: UHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd > usb usb2: SerialNumber: 0000:00:1d.0 > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > drivers/usb/core/inode.c: creating file '003' > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: detected 2 ports > uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 > uhci_hcd 0000:00:1d.1: Performing full reset > uhci_hcd 0000:00:1d.1: supports USB remote wakeup > uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 > usb usb3: default language 0x0409 > usb usb3: uevent > usb usb3: usb_probe_device > usb usb3: configuration #1 chosen from 1 choice > usb usb3: adding 3-0:1.0 (config #1, interface 0) > usb 3-0:1.0: uevent > hub 3-0:1.0: usb_probe_interface > hub 3-0:1.0: usb_probe_interface - got id > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > hub 3-0:1.0: standalone hub > hub 3-0:1.0: no power switching (usb 1.0) > hub 3-0:1.0: individual port over-current protection > hub 3-0:1.0: power on to power good time: 2ms > hub 3-0:1.0: local power source is good > hub 3-0:1.0: trying to enable port power on non-switchable hub > ehci_hcd 0000:00:1d.7: port 2 full speed --> companion > ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 2 not reset yet, waiting 50ms > ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 4, status 0501, change 0001, 480 Mb/s > drivers/usb/core/inode.c: creating file '001' > usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: UHCI Host Controller > usb usb3: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd > usb usb3: SerialNumber: 0000:00:1d.1 > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > drivers/usb/core/inode.c: creating file '004' > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: detected 2 ports > uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 > uhci_hcd 0000:00:1d.2: Performing full reset > uhci_hcd 0000:00:1d.2: supports USB remote wakeup > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 > usb usb4: default language 0x0409 > usb usb4: uevent > usb usb4: usb_probe_device > usb usb4: configuration #1 chosen from 1 choice > usb usb4: adding 4-0:1.0 (config #1, interface 0) > usb 4-0:1.0: uevent > hub 4-0:1.0: usb_probe_interface > hub 4-0:1.0: usb_probe_interface - got id > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > hub 4-0:1.0: standalone hub > hub 4-0:1.0: no power switching (usb 1.0) > hub 4-0:1.0: individual port over-current protection > hub 4-0:1.0: power on to power good time: 2ms > hub 4-0:1.0: local power source is good > hub 4-0:1.0: trying to enable port power on non-switchable hub > hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501 > drivers/usb/core/inode.c: creating file '001' > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: UHCI Host Controller > usb usb4: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd > usb usb4: SerialNumber: 0000:00:1d.2 > uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > drivers/usb/core/inode.c: creating file '005' > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: detected 2 ports > uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 > uhci_hcd 0000:00:1d.3: Performing full reset > uhci_hcd 0000:00:1d.3: supports USB remote wakeup > uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020 > usb usb5: default language 0x0409 > usb usb5: uevent > usb usb5: usb_probe_device > usb usb5: configuration #1 chosen from 1 choice > usb usb5: adding 5-0:1.0 (config #1, interface 0) > usb 5-0:1.0: uevent > hub 5-0:1.0: usb_probe_interface > hub 5-0:1.0: usb_probe_interface - got id > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > hub 5-0:1.0: standalone hub > hub 5-0:1.0: no power switching (usb 1.0) > hub 5-0:1.0: individual port over-current protection > hub 5-0:1.0: power on to power good time: 2ms > hub 5-0:1.0: local power source is good > hub 5-0:1.0: trying to enable port power on non-switchable hub > ehci_hcd 0000:00:1d.7: port 4 high speed > ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT > usb 1-4: new high speed USB device using ehci_hcd and address 3 > drivers/usb/core/inode.c: creating file '001' > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: Product: UHCI Host Controller > usb usb5: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd > usb usb5: SerialNumber: 0000:00:1d.3 > modprobe used greatest stack depth: 3744 bytes left > ata_piix 0000:00:1f.1: version 2.12 > ata_piix 0000:00:1f.1: power state changed by ACPI to D0 > ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1f.1 to 64 > ehci_hcd 0000:00:1d.7: port 4 high speed > ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT > scsi0 : ata_piix > scsi1 : ata_piix > ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14 > ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15 > usb 1-4: uevent > usb 1-4: usb_probe_device > usb 1-4: configuration #1 chosen from 1 choice > usb 1-4: adding 1-4:1.0 (config #1, interface 0) > usb 1-4:1.0: uevent > drivers/usb/core/inode.c: creating file '003' > usb 1-4: New USB device found, idVendor=05ac, idProduct=8300 > usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s > ata1.00: ATAPI: MATSHITADVD-R UJ-85J, FAV1, max UDMA/66 > ata1.00: configured for UDMA/66 > hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:1d.7: port 6 full speed --> companion > ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 6 not reset yet, waiting 50ms > ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s > isa bounce pool size: 16 pages > scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-85J FAV1 PQ: 0 ANSI: 5 > scsi 0:0:0:0: Attached scsi generic sg0 type 5 > ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] > hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:1d.7: port 7 full speed --> companion > ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 7 not reset yet, waiting 50ms > ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC > hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004 > uhci_hcd 0000:00:1d.0: port 2 portsc 009b,00 > hub 2-0:1.0: port 2, status 0101, change 0003, 12 Mb/s > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > scsi2 : ata_piix > scsi3 : ata_piix > ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19 > ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19 > hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 > ata3.01: ATA-7: TOSHIBA MK2035GSS, DK021B, max UDMA/100 > ata3.01: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/4) > ata3.01: configured for UDMA/100 > usb 2-2: new full speed USB device using uhci_hcd and address 2 > usb 2-2: ep0 maxpacket = 8 > usb 2-2: USB quirks for this device: 2 > scsi 2:0:1:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5 > sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB) > sd 2:0:1:0: [sda] Write Protect is off > sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 > sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB) > sd 2:0:1:0: [sda] Write Protect is off > sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 > sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda:<7>usb 2-2: skipped 1 descriptor after interface > usb 2-2: skipped 1 descriptor after interface > usb 2-2: skipped 1 descriptor after interface > usb 2-2: default language 0x0409 > usb 2-2: uevent > usb 2-2: usb_probe_device > usb 2-2: configuration #1 chosen from 1 choice > usb 2-2: adding 2-2:1.0 (config #1, interface 0) > usb 2-2:1.0: uevent > usbhid 2-2:1.0: usb_probe_interface > usbhid 2-2:1.0: usb_probe_interface - got id > input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5 > uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us > input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 > usb 2-2: adding 2-2:1.1 (config #1, interface 1) > usb 2-2:1.1: uevent > usbhid 2-2:1.1: usb_probe_interface > usbhid 2-2:1.1: usb_probe_interface - got id > usb 2-2: adding 2-2:1.2 (config #1, interface 2) > usb 2-2:1.2: uevent > usbhid 2-2:1.2: usb_probe_interface > usbhid 2-2:1.2: usb_probe_interface - got id > input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input6 > uhci_hcd 0000:00:1d.0: reserve dev 2 ep84-INT, period 8, phase 4, 12 us > sda1 sda2 sda3 sda4 sda5 > input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 > sd 2:0:1:0: [sda] Attached SCSI disk > sd 2:0:1:0: Attached scsi generic sg1 type 0 > modprobe used greatest stack depth: 2304 bytes left > drivers/usb/core/inode.c: creating file '002' > usb 2-2: New USB device found, idVendor=05ac, idProduct=021a > usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-2: Product: Apple Internal Keyboard / Trackpad > usb 2-2: Manufacturer: Apple Computer > hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 > hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 > uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00 > hub 3-0:1.0: port 2, status 0100, change 0003, 12 Mb/s > hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 > hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004 > uhci_hcd 0000:00:1d.2: port 2 portsc 009b,00 > hub 4-0:1.0: port 2, status 0101, change 0003, 12 Mb/s > hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 > usb 4-2: new full speed USB device using uhci_hcd and address 2 > usb 4-2: ep0 maxpacket = 8 > usb 4-2: skipped 1 descriptor after interface > usb 4-2: default language 0x0409 > usb 4-2: uevent > usb 4-2: usb_probe_device > usb 4-2: configuration #1 chosen from 1 choice > usb 4-2: adding 4-2:1.0 (config #1, interface 0) > usb 4-2:1.0: uevent > usbhid 4-2:1.0: usb_probe_interface > usbhid 4-2:1.0: usb_probe_interface - got id > drivers/usb/core/file.c: looking for a minor, starting at 96 > hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2 > drivers/usb/core/inode.c: creating file '002' > usb 4-2: New USB device found, idVendor=05ac, idProduct=8240 > usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 4-2: Product: IR Receiver > usb 4-2: Manufacturer: Apple Computer, Inc. > hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 > uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00 > hub 5-0:1.0: port 1, status 0101, change 0003, 12 Mb/s > hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 > usb 5-1: new full speed USB device using uhci_hcd and address 2 > usb 5-1: skipped 1 descriptor after interface > usb 5-1: skipped 1 descriptor after interface > usb 5-1: uevent > usb 5-1: usb_probe_device > usb 5-1: configuration #1 chosen from 1 choice > usb 5-1: adding 5-1:1.0 (config #1, interface 0) > usb 5-1:1.0: uevent > usbhid 5-1:1.0: usb_probe_interface > usbhid 5-1:1.0: usb_probe_interface - got id > input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7 > uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us > input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 > usb 5-1: adding 5-1:1.1 (config #1, interface 1) > usb 5-1:1.1: uevent > usbhid 5-1:1.1: usb_probe_interface > usbhid 5-1:1.1: usb_probe_interface - got id > input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input8 > input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1 > drivers/usb/core/inode.c: creating file '002' > usb 5-1: New USB device found, idVendor=05ac, idProduct=1000 > usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004 > usb usb3: suspend_rh (auto-stop) > hub 3-0:1.0: hub_suspend > usb usb3: bus auto-suspend > usb usb3: suspend_rh > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > type=1404 audit(1216436785.373:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 > SELinux: 8192 avtab hash slots, 171021 rules. > SELinux: 8192 avtab hash slots, 171021 rules. > SELinux: 8 users, 12 roles, 2347 types, 115 bools, 1 sens, 1024 cats > SELinux: 72 classes, 171021 rules > SELinux: permission open in class dir not defined in policy > SELinux: permission open in class file not defined in policy > SELinux: permission open in class chr_file not defined in policy > SELinux: permission open in class blk_file not defined in policy > SELinux: permission open in class fifo_file not defined in policy > SELinux: the above unknown classes and permissions will be allowed > SELinux: Completing initialization. > SELinux: Setting up existing superblocks. > SELinux: initialized (dev sda5, type ext3), uses xattr > SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts > SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs > SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts > SELinux: initialized (dev devpts, type devpts), uses transition SIDs > SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts > SELinux: initialized (dev pipefs, type pipefs), uses task SIDs > SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts > SELinux: initialized (dev sockfs, type sockfs), uses task SIDs > SELinux: initialized (dev proc, type proc), uses genfs_contexts > SELinux: initialized (dev bdev, type bdev), uses genfs_contexts > SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts > type=1403 audit(1216436786.249:3): policy loaded auid=4294967295 ses=4294967295 > usb usb2: uevent > usb 2-0:1.0: uevent > usb 2-2: uevent > usb 2-2:1.0: uevent > usb 2-2:1.1: uevent > usb 2-2:1.2: uevent > usb usb3: uevent > usb 3-0:1.0: uevent > usb usb4: uevent > usb 4-0:1.0: uevent > usb 4-2: uevent > usb 4-2:1.0: uevent > usb usb5: uevent > usb 5-0:1.0: uevent > usb 5-1: uevent > usb 5-1:1.0: uevent > usb 5-1:1.1: uevent > usb usb1: uevent > usb 1-0:1.0: uevent > usb 1-4: uevent > usb 1-4:1.0: uevent > appletouch 2-2:1.1: usb_probe_interface > appletouch 2-2:1.1: usb_probe_interface - got id > appletouch: Geyser mode initialized. > input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input9 > usbcore: registered new interface driver appletouch > intel_rng: FWH not detected > iTCO_vendor_support: vendor-support=0 > ath5k_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:03:00.0 to 64 > ath5k_pci 0000:03:00.0: registered as 'phy0' > ath5k phy0: Device not yet supported. > ath5k_pci 0000:03:00.0: PCI INT A disabled > ACPI: AC Adapter [ADP1] (on-line) > ath_hal: module license 'Proprietary' taints kernel. > AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133) > ACPI: Battery Slot [BAT0] (battery present) > Driver 'sr' needs updating - please use bus_type methods > sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 0:0:0:0: Attached scsi CD-ROM sr0 > input: PC Speaker as /devices/platform/pcspkr/input/input10 > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) > iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460) > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf] > ACPI: Device needs an ACPI driver > isight_firmware 1-4:1.0: usb_probe_interface > isight_firmware 1-4:1.0: usb_probe_interface - got id > firmware: requesting isight.fw > input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input11 > ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) > sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:02:00.0 to 64 > sky2 0000:02:00.0: v1.21 addr 0xd8200000 irq 16 Yukon-EC (0xb6) rev 2 > sky2 eth0: addr 00:17:f2:d1:e0:6f > Unable to load isight firmware > usbcore: registered new interface driver isight_firmware > firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.10 > firewire_core: created device fw0: GUID 0019e3fffe6e4c54, S800 > ath_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:03:00.0 to 64 > MadWifi: ath_attach: Switching rfkill capability off. > wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0) > ath_pci: wifi0: Atheros 5418: mem=0xd8100000, irq=17 > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > [drm] Initialized drm 1.1.0 20060810 > pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:01:00.0 to 64 > [drm] Initialized radeon 1.29.0 20080528 on minor 0 > [drm] Setting GART location based on new memory map > [drm] Loading R500 Microcode > [drm] Num pipes: 1 > [drm] writeback test succeeded in 1 usecs > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us > uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > appletouch: incomplete data package (first byte: 2, length: 4). > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com > device-mapper: multipath: version 1.0.5 loaded > EXT3 FS on sda5, internal journal > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda3, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: initialized (dev sda3, type ext3), uses xattr > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > Adding 2047992k swap on /dev/sda4. Priority:-1 extents:1 across:2047992k > SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts > IA-32 Microcode Update Driver: v1.14a > firmware: requesting intel-ucode/06-0f-06 > firmware: requesting intel-ucode/06-0f-06 > ip6_tables: (C) 2000-2006 Netfilter Core Team > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > ip_tables: (C) 2000-2006 Netfilter Core Team > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts > warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure. > fuse init (API version 7.9) > SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts > usb usb3: usb auto-resume > usb usb3: wakeup_rh > hub 3-0:1.0: hub_resume > hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 > usb usb3: suspend_rh (auto-stop) > uhci_hcd 0000:00:1d.2: reserve dev 2 ep83-INT, period 8, phase 4, 61 us > uhci_hcd 0000:00:1d.2: release dev 2 ep83-INT, period 8, phase 4, 61 us > hub 3-0:1.0: hub_suspend > usb usb3: bus auto-suspend > usb usb3: suspend_rh > Bluetooth: Core ver 2.11 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: L2CAP ver 2.9 > Bluetooth: L2CAP socket layer initialized > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM ver 1.8 > Bluetooth: BNEP (Ethernet Emulation) ver 1.2 > Bluetooth: BNEP filters: protocol multicast > Bridge firewalling registered > pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. > uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > [drm] Num pipes: 1 > [drm] Setting GART location based on new memory map > [drm] Loading R500 Microcode > [drm] Num pipes: 1 > [drm] writeback test succeeded in 1 usecs > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us > uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > ath0: no IPv6 routers present > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU0 attaching sched-domain: > domain 0: span 0-1 level MC > groups: 0 1 > domain 1: span 0-1 level NODE > groups: 0-1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level MC > groups: 1 0 > domain 1: span 0-1 level NODE > groups: 0-1 > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > SELinux: initialized (dev fuse, type fuse), uses genfs_contexts > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU0 attaching sched-domain: > domain 0: span 0-1 level MC > groups: 0 1 > domain 1: span 0-1 level NODE > groups: 0-1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level MC > groups: 1 0 > domain 1: span 0-1 level NODE > groups: 0-1 > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us > uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us > > > > > > > On Fri, Jul 18, 2008 at 06:22:08PM -0700, Yinghai Lu wrote: >> On Fri, Jul 18, 2008 at 5:58 PM, Jack Howarth wrote: >> > YH, >> > The patch you posted did not apply cleanly to tonight's or last night's linus kernel git. >> > I had to correct it by hand and this is what I applied... >> >> it should apply cleanly to linus tree too. >> >> please check the patch i sent out before and addon fix patch >> >> YH > >> [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved >> >> for MacBookPro2 >> >> change the mconf bus range from [0,0xff] to to [0, 0x3f] >> to match range [0xf0000000, 0xf4000000) in e820 tables. >> >> Signed-off-by: Yinghai Lu >> >> --- >> arch/x86/pci/mmconfig-shared.c | 64 ++++++++++++++++++++++++++++++----------- >> 1 file changed, 47 insertions(+), 17 deletions(-) >> >> Index: linux-2.6/arch/x86/pci/mmconfig-shared.c >> =================================================================== >> --- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c >> +++ linux-2.6/arch/x86/pci/mmconfig-shared.c >> @@ -293,7 +293,7 @@ static acpi_status __init find_mboard_re >> return AE_OK; >> } >> >> -static int __init is_acpi_reserved(unsigned long start, unsigned long end) >> +static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used) >> { >> struct resource mcfg_res; >> >> @@ -310,6 +310,41 @@ static int __init is_acpi_reserved(unsig >> return mcfg_res.flags; >> } >> >> +typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type); >> + >> +static int __init is_mmconf_reserved(check_reserved_t is_reserved, >> + u64 addr, u64 size, int i, >> + typeof(pci_mmcfg_config[0]) *cfg, int with_e820) >> +{ >> + u64 old_size = size; >> + int valid = 0; >> + >> + while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) { >> + size >>= 1; >> + if (size < (16UL<<20)) >> + break; >> + } >> + >> + if (size >= (16UL<<20) || size == old_size) { >> + printk(KERN_NOTICE >> + "PCI: MCFG area at %Lx reserved in %s\n", >> + addr, with_e820?"E820":"ACPI motherboard resources"); >> + valid = 1; >> + >> + if (old_size != size) { >> + /* update end_bus_number */ >> + cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1); >> + printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx " >> + "segment %hu buses %u - %u\n", >> + i, (unsigned long)cfg->address, cfg->pci_segment, >> + (unsigned int)cfg->start_bus_number, >> + (unsigned int)cfg->end_bus_number); >> + } >> + } >> + >> + return valid; >> +} >> + >> static void __init pci_mmcfg_reject_broken(int early) >> { >> typeof(pci_mmcfg_config[0]) *cfg; >> @@ -324,21 +359,21 @@ static void __init pci_mmcfg_reject_brok >> >> for (i = 0; i < pci_mmcfg_config_num; i++) { >> int valid = 0; >> - u32 size = (cfg->end_bus_number + 1) << 20; >> + u64 addr, size; >> + >> cfg = &pci_mmcfg_config[i]; >> + addr = cfg->start_bus_number; >> + addr <<= 20; >> + size = cfg->end_bus_number + 1 - cfg->start_bus_number; >> + size <<= 20; >> printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx " >> "segment %hu buses %u - %u\n", >> i, (unsigned long)cfg->address, cfg->pci_segment, >> (unsigned int)cfg->start_bus_number, >> (unsigned int)cfg->end_bus_number); >> >> - if (!early && >> - is_acpi_reserved(cfg->address, cfg->address + size - 1)) { >> - printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved " >> - "in ACPI motherboard resources\n", >> - cfg->address); >> - valid = 1; >> - } >> + if (!early) >> + valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0); >> >> if (valid) >> continue; >> @@ -347,16 +382,11 @@ static void __init pci_mmcfg_reject_brok >> printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not" >> " reserved in ACPI motherboard resources\n", >> cfg->address); >> + >> /* Don't try to do this check unless configuration >> type 1 is available. how about type 2 ?*/ >> - if (raw_pci_ops && e820_all_mapped(cfg->address, >> - cfg->address + size - 1, >> - E820_RESERVED)) { >> - printk(KERN_NOTICE >> - "PCI: MCFG area at %Lx reserved in E820\n", >> - cfg->address); >> - valid = 1; >> - } >> + if (raw_pci_ops) >> + valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1); >> >> if (!valid) >> goto reject; > >> [PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved >> >> Signed-off-by: Yinghai Lu >> >> diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c >> index 9297882..429c701 100644 >> --- a/arch/x86/pci/mmconfig-shared.c >> +++ b/arch/x86/pci/mmconfig-shared.c >> @@ -364,6 +364,7 @@ static void __init pci_mmcfg_reject_broken(int early) >> cfg = &pci_mmcfg_config[i]; >> addr = cfg->start_bus_number; >> addr <<= 20; >> + addr += cfg->address; >> size = cfg->end_bus_number + 1 - cfg->start_bus_number; >> size <<= 20; >> printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx " > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > Sorry to jump in; I just sent a post: this is happening with the macbook pro ati chipset as well. just did a reinstall, and am confronted with this. regards; -- Justin P. Mattock -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/