Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756010AbYGUPLR (ORCPT ); Mon, 21 Jul 2008 11:11:17 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752430AbYGUPK4 (ORCPT ); Mon, 21 Jul 2008 11:10:56 -0400 Received: from 74-93-104-97-Washington.hfc.comcastbusiness.net ([74.93.104.97]:58341 "EHLO sunset.davemloft.net" rhost-flags-OK-FAIL-OK-OK) by vger.kernel.org with ESMTP id S1752281AbYGUPKx (ORCPT ); Mon, 21 Jul 2008 11:10:53 -0400 Date: Mon, 21 Jul 2008 08:10:52 -0700 (PDT) Message-Id: <20080721.081052.260907189.davem@davemloft.net> To: mingo@elte.hu Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org Subject: Re: [crash] BUG: unable to handle kernel NULL pointer dereference at 0000000000000370 From: David Miller In-Reply-To: <20080721143023.GA32451@elte.hu> References: <20080721133059.GA30637@elte.hu> <20080721134506.GA27598@elte.hu> <20080721143023.GA32451@elte.hu> X-Mailer: Mew version 5.2 on Emacs 22.1 / Mule 5.0 (SAKAKI) Mime-Version: 1.0 Content-Type: Text/Plain; charset=utf-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from base64 to 8bit by alpha.home.local id m6LFBOfq032354 Content-Length: 61238 Lines: 1285 From: Ingo Molnar Date: Mon, 21 Jul 2008 16:30:23 +0200 > > * Ingo Molnar wrote: > > > Pid: 1, comm: swapper Not tainted 2.6.26-tip-00013-g6de15c6-dirty #21290 > > some more information: find below the same crash with vanilla > linus/master and no extra patches. The crash site is: Johannes/wireless-folks, can you take a look at this? Thanks. > > (gdb) list *0xffffffff808be0c2 > 0xffffffff808be0c2 is in rollback_registered (net/core/dev.c:3793). > 3788 { > 3789 BUG_ON(dev_boot_phase); > 3790 ASSERT_RTNL(); > 3791 > 3792 /* Some devices call without registering for initialization unwind. */ > 3793 if (dev->reg_state == NETREG_UNINITIALIZED) { > 3794 printk(KERN_DEBUG "unregister_netdevice: device %s/%p never " > 3795 "was registered\n", dev->name, dev); > 3796 > 3797 WARN_ON(1); > (gdb) > > Thanks, > > Ingo > > -----------------------------------> > Linux version 2.6.26-05253-g14b395e (mingo@dione) (gcc version 4.2.3) #21308 SMP Mon Jul 21 16:14:51 CEST 2008 > Command line: root=/dev/sda1 earlyprintk=vga console=ttyS0,115200 console=tty 5 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled pci=nomsi > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003ed94000 (usable) > BIOS-e820: 000000003ed94000 - 000000003ee4e000 (ACPI NVS) > BIOS-e820: 000000003ee4e000 - 000000003fea2000 (usable) > BIOS-e820: 000000003fea2000 - 000000003fee9000 (ACPI NVS) > BIOS-e820: 000000003fee9000 - 000000003feed000 (usable) > BIOS-e820: 000000003feed000 - 000000003feff000 (ACPI data) > BIOS-e820: 000000003feff000 - 000000003ff00000 (usable) > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > Centaur CentaurHauls > console [earlyvga0] enabled > debug: ignoring loglevel setting. > last_pfn = 0x3ff00 max_arch_pfn = 0x3ffffffff > init_memory_mapping > 0000000000 - 003fe00000 page 2M > 003fe00000 - 003ff00000 page 4k > kernel direct mapping tables up to 3ff00000 @ 8000-b000 > last_map_addr: 3ff00000 end: 3ff00000 > ACPI: RSDP 000FE020, 0014 (r0 INTEL ) > ACPI: RSDT 3FEFDE48, 0050 (r1 INTEL D975XBX 4B9 MSFT 1000013) > ACPI: FACP 3FEFCF10, 0074 (r1 INTEL D975XBX 4B9 MSFT 1000013) > ACPI: DSDT 3FEF8010, 3E70 (r1 INTEL D975XBX 4B9 MSFT 1000013) > ACPI: FACS 3FEDFC40, 0040 > ACPI: APIC 3FEFCE10, 0078 (r1 INTEL D975XBX 4B9 MSFT 1000013) > ACPI: WDDT 3FEF7F90, 0040 (r1 INTEL D975XBX 4B9 MSFT 1000013) > ACPI: MCFG 3FEF7F10, 003C (r1 INTEL D975XBX 4B9 MSFT 1000013) > ACPI: ASF! 3FEFCD10, 00A6 (r32 INTEL D975XBX 4B9 MSFT 1000013) > ACPI: HPET 3FEF7E90, 0038 (r1 INTEL D975XBX 4B9 MSFT 1000013) > ACPI: SSDT 3FEFDC10, 01BC (r1 INTEL CpuPm 4B9 MSFT 1000013) > ACPI: SSDT 3FEFDA10, 01B7 (r1 INTEL Cpu0Ist 4B9 MSFT 1000013) > ACPI: SSDT 3FEFD810, 01B7 (r1 INTEL Cpu1Ist 4B9 MSFT 1000013) > ACPI: SSDT 3FEFD610, 01B7 (r1 INTEL Cpu2Ist 4B9 MSFT 1000013) > ACPI: SSDT 3FEFD410, 01B7 (r1 INTEL Cpu3Ist 4B9 MSFT 1000013) > Entering add_active_range(0, 0x0, 0x9f) 0 entries of 25600 used > Entering add_active_range(0, 0x100, 0x3ed94) 1 entries of 25600 used > Entering add_active_range(0, 0x3ee4e, 0x3fea2) 2 entries of 25600 used > Entering add_active_range(0, 0x3fee9, 0x3feed) 3 entries of 25600 used > Entering add_active_range(0, 0x3feff, 0x3ff00) 4 entries of 25600 used > (5 early reservations) ==> bootmem > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] > #2 [0000200000 - 0001484b34] TEXT DATA BSS ==> [0000200000 - 0001484b34] > #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] > #4 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] > Zone PFN ranges: > DMA 0x00000000 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal 0x00100000 -> 0x00100000 > Movable zone start PFN for each node > early_node_map[5] active PFN ranges > 0: 0x00000000 -> 0x0000009f > 0: 0x00000100 -> 0x0003ed94 > 0: 0x0003ee4e -> 0x0003fea2 > 0: 0x0003fee9 -> 0x0003feed > 0: 0x0003feff -> 0x0003ff00 > On node 0 totalpages: 261516 > DMA zone: 56 pages used for memmap > DMA zone: 100 pages reserved > DMA zone: 3843 pages, LIFO batch:0 > DMA32 zone: 3525 pages used for memmap > DMA32 zone: 253992 pages, LIFO batch:31 > Normal zone: 0 pages used for memmap > Movable zone: 0 pages used for memmap > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) > ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Setting APIC routing to flat > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > SMP: Allowing 4 CPUs, 2 hotplug CPUs > mapped APIC to ffffffffff5fc000 ( fee00000) > mapped IOAPIC to ffffffffff5fb000 (00000000fec00000) > Allocating PCI resources starting at 40000000 (gap: 3ff00000:c0100000) > PERCPU: Allocating 40256 bytes of per cpu data > NR_CPUS: 4096, nr_cpu_ids: 4, nr_node_ids 512 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257835 > Kernel command line: root=/dev/sda1 earlyprintk=vga console=ttyS0,115200 console=tty 5 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled pci=nomsi > kernel profiling enabled (shift: 0) > debug: sysrq always enabled. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > TSC calibrated against PIT > Detected 2933.406 MHz processor. > Console: colour VGA+ 80x25 > console handover: boot [earlyvga0] -> real [tty0] > console [ttyS0] enabled > Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) > Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) > Checking aperture... > No AGP bridge found > Memory: 978020k/1047552k available (8071k kernel code, 67476k reserved, 6822k data, 540k init) > CPA: page pool initialized 1 of 1 pages preallocated > hpet clockevent registered > Calibrating delay loop (skipped), value calculated using timer frequency.. <6>5866.81 BogoMIPS (lpj=11733624) > Security Framework initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > Mount-cache hash table entries: 256 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 4096K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU0: Thermal monitoring enabled (TM2) > using mwait in idle threads. > ACPI: Core revision 20080609 > enabled ExtINT on CPU#0 > ENABLING IO-APIC IRQs > init IO_APIC IRQs > IO-APIC (apicid-pin) 2-0 not connected. > IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) > IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) > IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: Intel(R) Core(TM)2 CPU E6800 @ 2.93GHz stepping 05 > Using local APIC timer interrupts. > APIC timer calibration result 16667083 > Detected 16.667 MHz APIC timer. > Booting processor 1/1 ip 6000 > Initializing CPU#1 > masked ExtINT on CPU#1 > Calibrating delay using timer specific routine.. <6>5866.88 BogoMIPS (lpj=11733771) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 4096K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU1: Thermal monitoring enabled (TM2) > CPU1: Intel(R) Core(TM)2 CPU E6800 @ 2.93GHz stepping 05 > checking TSC synchronization [CPU#0 -> CPU#1]: passed. > Brought up 2 CPUs > Total of 2 processors activated (11733.69 BogoMIPS). > calling init_cpufreq_transition_notifier_list+0x0/0x1b > initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 msecs > calling net_ns_init+0x0/0x133 > net_namespace: 1120 bytes > initcall net_ns_init+0x0/0x133 returned 0 after 0 msecs > calling cpufreq_tsc+0x0/0x16 > initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs > calling init_smp_flush+0x0/0x51 > initcall init_smp_flush+0x0/0x51 returned 0 after 0 msecs > calling print_banner+0x0/0xf > Booting paravirtualized kernel on bare hardware > initcall print_banner+0x0/0xf returned 0 after 3 msecs > calling sysctl_init+0x0/0x32 > initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs > calling ksysfs_init+0x0/0xb9 > initcall ksysfs_init+0x0/0xb9 returned 0 after 0 msecs > calling init_jiffies_clocksource+0x0/0xc > initcall init_jiffies_clocksource+0x0/0xc returned 0 after 0 msecs > calling pm_init+0x0/0x35 > initcall pm_init+0x0/0x35 returned 0 after 0 msecs > calling filelock_init+0x0/0x2e > initcall filelock_init+0x0/0x2e returned 0 after 0 msecs > calling init_script_binfmt+0x0/0xc > initcall init_script_binfmt+0x0/0xc returned 0 after 0 msecs > calling init_elf_binfmt+0x0/0xc > initcall init_elf_binfmt+0x0/0xc returned 0 after 0 msecs > calling init_compat_elf_binfmt+0x0/0xc > initcall init_compat_elf_binfmt+0x0/0xc returned 0 after 0 msecs > calling debugfs_init+0x0/0x47 > initcall debugfs_init+0x0/0x47 returned 0 after 0 msecs > calling securityfs_init+0x0/0x47 > initcall securityfs_init+0x0/0x47 returned 0 after 0 msecs > calling random32_init+0x0/0x5f > initcall random32_init+0x0/0x5f returned 0 after 0 msecs > calling cpufreq_core_init+0x0/0x84 > initcall cpufreq_core_init+0x0/0x84 returned 0 after 0 msecs > calling cpuidle_init+0x0/0x36 > initcall cpuidle_init+0x0/0x36 returned 0 after 0 msecs > calling virtio_init+0x0/0x26 > initcall virtio_init+0x0/0x26 returned 0 after 0 msecs > calling sock_init+0x0/0x5e > initcall sock_init+0x0/0x5e returned 0 after 0 msecs > calling netpoll_init+0x0/0x2c > initcall netpoll_init+0x0/0x2c returned 0 after 0 msecs > calling netlink_proto_init+0x0/0x13e > NET: Registered protocol family 16 > initcall netlink_proto_init+0x0/0x13e returned 0 after 3 msecs > calling bdi_class_init+0x0/0x3d > initcall bdi_class_init+0x0/0x3d returned 0 after 0 msecs > calling kobject_uevent_init+0x0/0x45 > initcall kobject_uevent_init+0x0/0x45 returned 0 after 0 msecs > calling pcibus_class_init+0x0/0xc > initcall pcibus_class_init+0x0/0xc returned 0 after 0 msecs > calling pci_driver_init+0x0/0xc > initcall pci_driver_init+0x0/0xc returned 0 after 0 msecs > calling lcd_class_init+0x0/0x49 > initcall lcd_class_init+0x0/0x49 returned 0 after 0 msecs > calling backlight_class_init+0x0/0x4a > initcall backlight_class_init+0x0/0x4a returned 0 after 0 msecs > calling dock_init+0x0/0x5c > No dock devices found. > initcall dock_init+0x0/0x5c returned 0 after 0 msecs > calling tty_class_init+0x0/0x2a > initcall tty_class_init+0x0/0x2a returned 0 after 0 msecs > calling vtconsole_class_init+0x0/0xaf > initcall vtconsole_class_init+0x0/0xaf returned 0 after 0 msecs > calling enable_pci_io_ecs+0x0/0x2e > initcall enable_pci_io_ecs+0x0/0x2e returned 0 after 0 msecs > calling early_fill_mp_bus_info+0x0/0x763 > initcall early_fill_mp_bus_info+0x0/0x763 returned 0 after 0 msecs > calling arch_kdebugfs_init+0x0/0x3 > initcall arch_kdebugfs_init+0x0/0x3 returned 0 after 0 msecs > calling ffh_cstate_init+0x0/0x31 > initcall ffh_cstate_init+0x0/0x31 returned 0 after 0 msecs > calling acpi_pci_init+0x0/0x3b > ACPI: bus type pci registered > initcall acpi_pci_init+0x0/0x3b returned 0 after 0 msecs > calling init_acpi_device_notify+0x0/0x4b > initcall init_acpi_device_notify+0x0/0x4b returned 0 after 0 msecs > calling pci_arch_init+0x0/0x44 > PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 > PCI: Not using MMCONFIG. > PCI: Using configuration type 1 for base access > initcall pci_arch_init+0x0/0x44 returned 0 after 11 msecs > calling topology_init+0x0/0x31 > initcall topology_init+0x0/0x31 returned 0 after 0 msecs > calling param_sysfs_init+0x0/0x1c1 > initcall param_sysfs_init+0x0/0x1c1 returned 0 after 11 msecs > calling pm_sysrq_init+0x0/0x19 > initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 msecs > calling readahead_init+0x0/0x2e > initcall readahead_init+0x0/0x2e returned 0 after 3 msecs > calling init_bio+0x0/0xc0 > initcall init_bio+0x0/0xc0 returned 0 after 0 msecs > calling integrity_init+0x0/0x35 > initcall integrity_init+0x0/0x35 returned 0 after 0 msecs > calling blk_settings_init+0x0/0x25 > initcall blk_settings_init+0x0/0x25 returned 0 after 0 msecs > calling blk_ioc_init+0x0/0x2a > initcall blk_ioc_init+0x0/0x2a returned 0 after 0 msecs > calling genhd_device_init+0x0/0x36 > initcall genhd_device_init+0x0/0x36 returned 0 after 0 msecs > calling blk_dev_integrity_init+0x0/0x2a > initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 msecs > calling pci_slot_init+0x0/0x45 > initcall pci_slot_init+0x0/0x45 returned 0 after 0 msecs > calling acpi_init+0x0/0x21b > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S5) > ACPI: Using IOAPIC for interrupt routing > PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 > PCI: BIOS Bug: MCFG area at f0000000 is not reserved in ACPI motherboard resources > PCI: Not using MMCONFIG. > initcall acpi_init+0x0/0x21b returned 0 after 26 msecs > calling acpi_scan_init+0x0/0x113 > initcall acpi_scan_init+0x0/0x113 returned 0 after 3 msecs > calling acpi_ec_init+0x0/0x61 > initcall acpi_ec_init+0x0/0x61 returned 0 after 0 msecs > calling acpi_pci_root_init+0x0/0x28 > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > pci 0000:00:01.0: PME# disabled > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1b.0: PME# disabled > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: PME# disabled > pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.4: PME# disabled > pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.5: PME# disabled > pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.7: PME# disabled > pci 0000:00:1f.2: PME# supported from D3hot > pci 0000:00:1f.2: PME# disabled > pci 0000:01:00.0: supports D1 > pci 0000:01:00.0: supports D2 > pci 0000:01:00.1: supports D1 > pci 0000:01:00.1: supports D2 > pci 0000:02:00.0: supports D1 > pci 0000:02:00.0: supports D2 > pci 0000:02:00.0: PME# supported from D0 D1 D2 > pci 0000:02:00.0: PME# disabled > pci 0000:04:00.0: PME# supported from D0 D3hot D3cold > pci 0000:04:00.0: PME# disabled > pci 0000:05:04.0: supports D1 > pci 0000:05:04.0: supports D2 > pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot > pci 0000:05:04.0: PME# disabled > pci 0000:05:05.0: supports D1 > pci 0000:05:05.0: supports D2 > pci 0000:00:1e.0: transparent bridge > bus 00 -> node 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] > initcall acpi_pci_root_init+0x0/0x28 returned 0 after 110 msecs > calling acpi_pci_link_init+0x0/0x48 > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) > initcall acpi_pci_link_init+0x0/0x48 returned 0 after 49 msecs > calling acpi_power_init+0x0/0x77 > initcall acpi_power_init+0x0/0x77 returned 0 after 0 msecs > calling acpi_system_init+0x0/0x264 > initcall acpi_system_init+0x0/0x264 returned 0 after 0 msecs > calling pnp_init+0x0/0x1f > Linux Plug and Play Support v0.97 (c) Adam Belay > initcall pnp_init+0x0/0x1f returned 0 after 3 msecs > calling pnpacpi_init+0x0/0x8c > pnp: PnP ACPI init > ACPI: bus type pnp registered > IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) > IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > initcall pnpacpi_init+0x0/0x8c returned 0 after 38 msecs > calling misc_init+0x0/0x8e > initcall misc_init+0x0/0x8e returned 0 after 0 msecs > calling cn_init+0x0/0xee > initcall cn_init+0x0/0xee returned 0 after 0 msecs > calling tifm_init+0x0/0x6d > initcall tifm_init+0x0/0x6d returned 0 after 0 msecs > calling phy_init+0x0/0x27 > initcall phy_init+0x0/0x27 returned 0 after 0 msecs > calling init_dvbdev+0x0/0xaf > initcall init_dvbdev+0x0/0xaf returned 0 after 0 msecs > calling init_scsi+0x0/0x72 > SCSI subsystem initialized > initcall init_scsi+0x0/0x72 returned 0 after 3 msecs > calling ata_init+0x0/0x32a > libata version 3.00 loaded. > initcall ata_init+0x0/0x32a returned 0 after 3 msecs > calling spi_init+0x0/0x73 > initcall spi_init+0x0/0x73 returned 0 after 0 msecs > calling init_pcmcia_cs+0x0/0x27 > initcall init_pcmcia_cs+0x0/0x27 returned 0 after 0 msecs > calling usb_init+0x0/0x104 > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > initcall usb_init+0x0/0x104 returned 0 after 11 msecs > calling serio_init+0x0/0x8b > initcall serio_init+0x0/0x8b returned 0 after 0 msecs > calling gameport_init+0x0/0x8b > initcall gameport_init+0x0/0x8b returned 0 after 0 msecs > calling input_init+0x0/0xfc > initcall input_init+0x0/0xfc returned 0 after 0 msecs > calling i2c_init+0x0/0x55 > initcall i2c_init+0x0/0x55 returned 0 after 0 msecs > calling power_supply_class_init+0x0/0x34 > initcall power_supply_class_init+0x0/0x34 returned 0 after 0 msecs > calling thermal_init+0x0/0x2f > initcall thermal_init+0x0/0x2f returned 0 after 0 msecs > calling mmc_init+0x0/0x65 > initcall mmc_init+0x0/0x65 returned 0 after 0 msecs > calling leds_init+0x0/0x2a > initcall leds_init+0x0/0x2a returned 0 after 0 msecs > calling dma_bus_init+0x0/0x2b > initcall dma_bus_init+0x0/0x2b returned 0 after 0 msecs > calling ac97_bus_init+0x0/0xc > initcall ac97_bus_init+0x0/0xc returned 0 after 0 msecs > calling pci_subsys_init+0x0/0x116 > PCI: Using ACPI for IRQ routing > number of MP IRQ sources: 15. > number of IO-APIC #2 registers: 24. > testing the IO APIC....................... > > IO APIC #2...... > .... register #00: 00000000 > ....... : physical APIC id: 00 > .... register #01: 00170020 > ....... : max redirection entries: 0017 > ....... : PRQ implemented: 0 > ....... : IO APIC version: 0020 > .... register #02: 00170020 > ....... : arbitration: 00 > .... IRQ redirection table: > NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: > 00 000 1 0 0 0 0 0 0 00 > 01 003 0 0 0 0 0 1 1 31 > 02 003 0 0 0 0 0 1 1 30 > 03 003 0 0 0 0 0 1 1 33 > 04 003 0 0 0 0 0 1 1 34 > 05 003 0 0 0 0 0 1 1 35 > 06 003 0 0 0 0 0 1 1 36 > 07 003 0 0 0 0 0 1 1 37 > 08 003 0 0 0 0 0 1 1 38 > 09 003 0 1 0 0 0 1 1 39 > 0a 003 0 0 0 0 0 1 1 3A > 0b 003 0 0 0 0 0 1 1 3B > 0c 003 0 0 0 0 0 1 1 3C > 0d 003 0 0 0 0 0 1 1 3D > 0e 003 0 0 0 0 0 1 1 3E > 0f 003 0 0 0 0 0 1 1 3F > 10 000 1 0 0 0 0 0 0 00 > 11 000 1 0 0 0 0 0 0 00 > 12 000 1 0 0 0 0 0 0 00 > 13 000 1 0 0 0 0 0 0 00 > 14 000 1 0 0 0 0 0 0 00 > 15 000 1 0 0 0 0 0 0 00 > 16 000 1 0 0 0 0 0 0 00 > 17 000 1 0 0 0 0 0 0 00 > IRQ to pin mappings: > IRQ0 -> 0:2 > IRQ1 -> 0:1 > IRQ3 -> 0:3 > IRQ4 -> 0:4 > IRQ5 -> 0:5 > IRQ6 -> 0:6 > IRQ7 -> 0:7 > IRQ8 -> 0:8 > IRQ9 -> 0:9 > IRQ10 -> 0:10 > IRQ11 -> 0:11 > IRQ12 -> 0:12 > IRQ13 -> 0:13 > IRQ14 -> 0:14 > IRQ15 -> 0:15 > .................................... done. > initcall pci_subsys_init+0x0/0x116 returned 0 after 164 msecs > calling proto_init+0x0/0x2e > initcall proto_init+0x0/0x2e returned 0 after 0 msecs > calling net_dev_init+0x0/0x158 > initcall net_dev_init+0x0/0x158 returned 0 after 0 msecs > calling neigh_init+0x0/0x71 > initcall neigh_init+0x0/0x71 returned 0 after 0 msecs > calling fib_rules_init+0x0/0x9c > initcall fib_rules_init+0x0/0x9c returned 0 after 0 msecs > calling genl_init+0x0/0xce > initcall genl_init+0x0/0xce returned 0 after 15 msecs > calling cipso_v4_init+0x0/0x67 > initcall cipso_v4_init+0x0/0x67 returned 0 after 0 msecs > calling wireless_nlevent_init+0x0/0x2c > initcall wireless_nlevent_init+0x0/0x2c returned 0 after 0 msecs > calling cfg80211_init+0x0/0x55 > initcall cfg80211_init+0x0/0x55 returned 0 after 11 msecs > calling ieee80211_init+0x0/0xd > initcall ieee80211_init+0x0/0xd returned 0 after 0 msecs > calling netlbl_init+0x0/0x83 > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > initcall netlbl_init+0x0/0x83 returned 0 after 11 msecs > calling sysctl_init+0x0/0x2f > initcall sysctl_init+0x0/0x2f returned 0 after 0 msecs > calling pci_iommu_init+0x0/0x12 > PCI-GART: No AMD northbridge found. > initcall pci_iommu_init+0x0/0x12 returned 0 after 3 msecs > calling hpet_late_init+0x0/0xfc > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > hpet0: 3 64-bit timers, 14318180 Hz > initcall hpet_late_init+0x0/0xfc returned 0 after 7 msecs > calling clocksource_done_booting+0x0/0xd > initcall clocksource_done_booting+0x0/0xd<7>Switched to high resolution mode on CPU 0 > Switched to high resolution mode on CPU 1 > returned 0 after 0 msecs > calling tracer_alloc_buffers+0x0/0x4ec > tracer: 1286 pages allocated for 65536 entries of 80 bytes > actual entries 65586 > initcall tracer_alloc_buffers+0x0/0x4ec returned 0 after 8 msecs > calling init_pipe_fs+0x0/0x42 > initcall init_pipe_fs+0x0/0x42 returned 0 after 0 msecs > calling init_mnt_writers+0x0/0x58 > initcall init_mnt_writers+0x0/0x58 returned 0 after 0 msecs > calling anon_inode_init+0x0/0x10b > initcall anon_inode_init+0x0/0x10b returned 0 after 0 msecs > calling acpi_event_init+0x0/0x52 > initcall acpi_event_init+0x0/0x52 returned 0 after 10 msecs > calling pnp_system_init+0x0/0xc > system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved > system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved > system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved > system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved > system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved > system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved > system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved > system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved > system 00:01: iomem range 0xc0000-0xdffff has been reserved > system 00:01: iomem range 0xe0000-0xfffff could not be reserved > system 00:06: ioport range 0x500-0x53f has been reserved > system 00:06: ioport range 0x400-0x47f has been reserved > system 00:06: ioport range 0x680-0x6ff has been reserved > initcall pnp_system_init+0x0/0xc returned 0 after 70 msecs > calling chr_dev_init+0x0/0x9a > initcall chr_dev_init+0x0/0x9a returned 0 after 0 msecs > calling firmware_class_init+0x0/0x68 > initcall firmware_class_init+0x0/0x68 returned 0 after 0 msecs > calling loopback_init+0x0/0xc > initcall loopback_init+0x0/0xc returned 0 after 0 msecs > calling cpufreq_gov_performance_init+0x0/0xc > initcall cpufreq_gov_performance_init+0x0/0xc returned 0 after 0 msecs > calling cpufreq_gov_dbs_init+0x0/0x47 > initcall cpufreq_gov_dbs_init+0x0/0x47 returned 0 after 0 msecs > calling ssb_modinit+0x0/0x4b > initcall ssb_modinit+0x0/0x4b returned 0 after 0 msecs > calling pcibios_assign_resources+0x0/0x86 > pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:01.0: IO window: 0x3000-0x3fff > pci 0000:00:01.0: MEM window: 0x50300000-0x503fffff > pci 0000:00:01.0: PREFETCH window: 0x00000040000000-0x0000004fffffff > pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 > pci 0000:00:1c.0: IO window: disabled > pci 0000:00:1c.0: MEM window: 0x50200000-0x502fffff > pci 0000:00:1c.0: PREFETCH window: disabled > pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 > pci 0000:00:1c.4: IO window: disabled > pci 0000:00:1c.4: MEM window: disabled > pci 0000:00:1c.4: PREFETCH window: disabled > pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 > pci 0000:00:1c.5: IO window: 0x2000-0x2fff > pci 0000:00:1c.5: MEM window: 0x50100000-0x501fffff > pci 0000:00:1c.5: PREFETCH window: disabled > pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 > pci 0000:00:1e.0: IO window: 0x1000-0x1fff > pci 0000:00:1e.0: MEM window: 0x50000000-0x500fffff > pci 0000:00:1e.0: PREFETCH window: disabled > IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) > pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > IOAPIC[0]: Set routing entry (2-17 -> 0x51 -> IRQ 17 Mode:1 Active:1) > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1c.4 to 64 > pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1c.5 to 64 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > initcall pcibios_assign_resources+0x0/0x86 returned 0 after 147 msecs > calling inet_init+0x0/0x1df > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 6, 262144 bytes) > TCP established hash table entries: 131072 (order: 9, 2097152 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > initcall inet_init+0x0/0x1df returned 0 after 75 msecs > calling af_unix_init+0x0/0x4b > NET: Registered protocol family 1 > initcall af_unix_init+0x0/0x4b returned 0 after 3 msecs > calling default_rootfs+0x0/0x61 > initcall default_rootfs+0x0/0x61 returned 0 after 0 msecs > calling i8259A_init_sysfs+0x0/0x23 > initcall i8259A_init_sysfs+0x0/0x23 returned 0 after 0 msecs > calling vsyscall_init+0x0/0x6c > initcall vsyscall_init+0x0/0x6c returned 0 after 0 msecs > calling sbf_init+0x0/0xd5 > initcall sbf_init+0x0/0xd5 returned 0 after 0 msecs > calling i8237A_init_sysfs+0x0/0x23 > initcall i8237A_init_sysfs+0x0/0x23 returned 0 after 0 msecs > calling add_rtc_cmos+0x0/0x1d > initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs > calling cache_sysfs_init+0x0/0x55 > initcall cache_sysfs_init+0x0/0x55 returned 0 after 0 msecs > calling mce_init_device+0x0/0x7f > initcall mce_init_device+0x0/0x7f returned 0 after 0 msecs > calling periodic_mcheck_init+0x0/0x3f > initcall periodic_mcheck_init+0x0/0x3f returned 0 after 0 msecs > calling thermal_throttle_init_device+0x0/0x7b > initcall thermal_throttle_init_device+0x0/0x7b returned 0 after 0 msecs > calling microcode_init+0x0/0xaf > IA-32 Microcode Update Driver: v1.14a > initcall microcode_init+0x0/0xaf returned 0 after 5 msecs > calling init_lapic_sysfs+0x0/0x2f > initcall init_lapic_sysfs+0x0/0x2f returned 0 after 0 msecs > calling ioapic_init_sysfs+0x0/0x99 > initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 0 msecs > calling uv_ptc_init+0x0/0x75 > initcall uv_ptc_init+0x0/0x75 returned 0 after 0 msecs > calling uv_bau_init+0x0/0x5d0 > initcall uv_bau_init+0x0/0x5d0 returned 0 after 0 msecs > calling audit_classes_init+0x0/0xaf > initcall audit_classes_init+0x0/0xaf returned 0 after 0 msecs > calling aes_init+0x0/0xc > initcall aes_init+0x0/0xc returned 0 after 0 msecs > calling init+0x0/0xc > initcall init+0x0/0xc returned 0 after 0 msecs > calling init_vdso_vars+0x0/0x224 > initcall init_vdso_vars+0x0/0x224 returned 0 after 0 msecs > calling ia32_binfmt_init+0x0/0x14 > initcall ia32_binfmt_init+0x0/0x14 returned 0 after 0 msecs > calling sysenter_setup+0x0/0x2ac > initcall sysenter_setup+0x0/0x2ac returned 0 after 0 msecs > calling init_aout_binfmt+0x0/0xc > initcall init_aout_binfmt+0x0/0xc returned 0 after 0 msecs > calling create_proc_profile+0x0/0x319 > initcall create_proc_profile+0x0/0x319 returned 0 after 0 msecs > calling ioresources_init+0x0/0x3c > initcall ioresources_init+0x0/0x3c returned 0 after 0 msecs > calling uid_cache_init+0x0/0x6f > initcall uid_cache_init+0x0/0x6f returned 0 after 0 msecs > calling init_posix_timers+0x0/0xa6 > initcall init_posix_timers+0x0/0xa6 returned 0 after 0 msecs > calling init_posix_cpu_timers+0x0/0xc6 > initcall init_posix_cpu_timers+0x0/0xc6 returned 0 after 0 msecs > calling nsproxy_cache_init+0x0/0x2d > initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 msecs > calling timekeeping_init_device+0x0/0x23 > initcall timekeeping_init_device+0x0/0x23 returned 0 after 0 msecs > calling init_clocksource_sysfs+0x0/0x51 > initcall init_clocksource_sysfs+0x0/0x51 returned 0 after 0 msecs > calling init_timer_list_procfs+0x0/0x2c > initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 msecs > calling futex_init+0x0/0x67 > initcall futex_init+0x0/0x67 returned 0 after 0 msecs > calling proc_dma_init+0x0/0x22 > initcall proc_dma_init+0x0/0x22 returned 0 after 0 msecs > calling kallsyms_init+0x0/0x25 > initcall kallsyms_init+0x0/0x25 returned 0 after 0 msecs > calling pid_namespaces_init+0x0/0x2d > initcall pid_namespaces_init+0x0/0x2d returned 0 after 0 msecs > calling audit_init+0x0/0x126 > audit: initializing netlink socket (disabled) > type=2000 audit(1216650963.392:1): initialized > initcall audit_init+0x0/0x126 returned 0 after 8 msecs > calling relay_init+0x0/0x14 > initcall relay_init+0x0/0x14 returned 0 after 0 msecs > calling utsname_sysctl_init+0x0/0x14 > initcall utsname_sysctl_init+0x0/0x14 returned 0 after 0 msecs > calling init_stack_trace+0x0/0xc > Testing tracer sysprof: PASSED > initcall init_stack_trace+0x0/0xc returned 0 after 98 msecs > calling init_per_zone_pages_min+0x0/0x45 > initcall init_per_zone_pages_min+0x0/0x45 returned 0 after 0 msecs > calling pdflush_init+0x0/0x13 > initcall pdflush_init+0x0/0x13 returned 0 after 0 msecs > calling kswapd_init+0x0/0x5e > initcall kswapd_init+0x0/0x5e returned 0 after 0 msecs > calling setup_vmstat+0x0/0x42 > initcall setup_vmstat+0x0/0x42 returned 0 after 0 msecs > calling init_tmpfs+0x0/0x3d > initcall init_tmpfs+0x0/0x3d returned 0 after 0 msecs > calling fasync_init+0x0/0x2a > initcall fasync_init+0x0/0x2a returned 0 after 0 msecs > calling aio_setup+0x0/0x6e > initcall aio_setup+0x0/0x6e returned 0 after 0 msecs > calling inotify_setup+0x0/0xd > initcall inotify_setup+0x0/0xd returned 0 after 0 msecs > calling inotify_user_setup+0x0/0xb8 > initcall inotify_user_setup+0x0/0xb8 returned 0 after 0 msecs > calling init_sys32_ioctl+0x0/0x85 > initcall init_sys32_ioctl+0x0/0x85 returned 0 after 0 msecs > calling init_mbcache+0x0/0x14 > initcall init_mbcache+0x0/0x14 returned 0 after 0 msecs > calling dquot_init+0x0/0xde > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > initcall dquot_init+0x0/0xde returned 0 after 7 msecs > calling init_v2_quota_format+0x0/0xc > initcall init_v2_quota_format+0x0/0xc returned 0 after 0 msecs > calling dnotify_init+0x0/0x2a > initcall dnotify_init+0x0/0x2a returned 0 after 0 msecs > calling configfs_init+0x0/0xa9 > initcall configfs_init+0x0/0xa9 returned 0 after 0 msecs > calling init_devpts_fs+0x0/0x35 > initcall init_devpts_fs+0x0/0x35 returned 0 after 0 msecs > calling init_ext3_fs+0x0/0x60 > initcall init_ext3_fs+0x0/0x60 returned 0 after 0 msecs > calling journal_init+0x0/0xc5 > initcall journal_init+0x0/0xc5 returned 0 after 0 msecs > calling init_ext2_fs+0x0/0x60 > initcall init_ext2_fs+0x0/0x60 returned 0 after 0 msecs > calling init_ramfs_fs+0x0/0xc > initcall init_ramfs_fs+0x0/0xc returned 0 after 0 msecs > calling init_fat_fs+0x0/0x45 > initcall init_fat_fs+0x0/0x45 returned 0 after 0 msecs > calling init_msdos_fs+0x0/0xc > initcall init_msdos_fs+0x0/0xc returned 0 after 0 msecs > calling init_vfat_fs+0x0/0xc > initcall init_vfat_fs+0x0/0xc returned 0 after 0 msecs > calling init_iso9660_fs+0x0/0x50 > initcall init_iso9660_fs+0x0/0x50 returned 0 after 0 msecs > calling init_hfsplus_fs+0x0/0x53 > initcall init_hfsplus_fs+0x0/0x53 returned 0 after 0 msecs > calling init_hfs_fs+0x0/0x53 > initcall init_hfs_fs+0x0/0x53 returned 0 after 0 msecs > calling vxfs_init+0x0/0x4f > initcall vxfs_init+0x0/0x4f returned 0 after 0 msecs > calling init_nls_cp437+0x0/0xc > initcall init_nls_cp437+0x0/0xc returned 0 after 0 msecs > calling init_nls_cp775+0x0/0xc > initcall init_nls_cp775+0x0/0xc returned 0 after 0 msecs > calling init_nls_cp850+0x0/0xc > initcall init_nls_cp850+0x0/0xc returned 0 after 0 msecs > calling init_nls_cp852+0x0/0xc > initcall init_nls_cp852+0x0/0xc returned 0 after 0 msecs > calling init_nls_cp855+0x0/0xc > initcall init_nls_cp855+0x0/0xc returned 0 after 0 msecs > calling init_nls_cp857+0x0/0xc > initcall init_nls_cp857+0x0/0xc returned 0 after 0 msecs > calling init_nls_cp860+0x0/0xc > initcall init_nls_cp860+0x0/0xc returned 0 after 0 msecs > calling init_nls_cp863+0x0/0xc > initcall init_nls_cp863+0x0/0xc returned 0 after 0 msecs > calling init_nls_cp874+0x0/0xc > initcall init_nls_cp874+0x0/0xc returned 0 after 0 msecs > calling init_nls_cp932+0x0/0xc > initcall init_nls_cp932+0x0/0xc returned 0 after 0 msecs > calling init_nls_euc_jp+0x0/0x4a > initcall init_nls_euc_jp+0x0/0x4a returned 0 after 0 msecs > calling init_nls_cp936+0x0/0xc > initcall init_nls_cp936+0x0/0xc returned 0 after 0 msecs > calling init_nls_ascii+0x0/0xc > initcall init_nls_ascii+0x0/0xc returned 0 after 0 msecs > calling init_nls_iso8859_1+0x0/0xc > initcall init_nls_iso8859_1+0x0/0xc returned 0 after 0 msecs > calling init_nls_iso8859_5+0x0/0xc > initcall init_nls_iso8859_5+0x0/0xc returned 0 after 0 msecs > calling init_nls_iso8859_13+0x0/0xc > initcall init_nls_iso8859_13+0x0/0xc returned 0 after 0 msecs > calling init_nls_iso8859_14+0x0/0xc > initcall init_nls_iso8859_14+0x0/0xc returned 0 after 0 msecs > calling init_nls_koi8_r+0x0/0xc > initcall init_nls_koi8_r+0x0/0xc returned 0 after 0 msecs > calling init_nls_utf8+0x0/0x1f > initcall init_nls_utf8+0x0/0x1f returned 0 after 0 msecs > calling init_sysv_fs+0x0/0x45 > initcall init_sysv_fs+0x0/0x45 returned 0 after 0 msecs > calling init_hpfs_fs+0x0/0x50 > initcall init_hpfs_fs+0x0/0x50 returned 0 after 0 msecs > calling init_ntfs_fs+0x0/0x1c7 > NTFS driver 2.1.29 [Flags: R/O]. > initcall init_ntfs_fs+0x0/0x1c7 returned 0 after 2 msecs > calling init_qnx4_fs+0x0/0x62 > QNX4 filesystem 0.2.3 registered. > initcall init_qnx4_fs+0x0/0x62 returned 0 after 3 msecs > calling init_adfs_fs+0x0/0x50 > initcall init_adfs_fs+0x0/0x50 returned 0 after 0 msecs > calling fuse_init+0x0/0x11b > fuse init (API version 7.9) > initcall fuse_init+0x0/0x11b returned 0 after 2 msecs > calling init_jfs_fs+0x0/0x1db > JFS: nTxBlock = 7645, nTxLock = 61161 > initcall init_jfs_fs+0x0/0x1db returned 0 after 8 msecs > calling init_befs_fs+0x0/0x71 > BeFS version: 0.9.3 > initcall init_befs_fs+0x0/0x71 returned 0 after 1 msecs > calling ocfs2_init+0x0/0x28b > OCFS2 1.5.0 > initcall ocfs2_init+0x0/0x28b returned 0 after 1 msecs > calling ocfs2_stack_glue_init+0x0/0x8b > initcall ocfs2_stack_glue_init+0x0/0x8b returned 0 after 0 msecs > calling init_o2nm+0x0/0x90 > OCFS2 Node Manager 1.5.0 > initcall init_o2nm+0x0/0x90 returned 0 after 2 msecs > calling init_gfs2_fs+0x0/0x16e > GFS2 (built Jul 21 2008 16:13:18) installed > initcall init_gfs2_fs+0x0/0x16e returned 0 after 5 msecs > calling init_mqueue_fs+0x0/0xbc > initcall init_mqueue_fs+0x0/0xbc returned 0 after 0 msecs > calling key_proc_init+0x0/0x59 > initcall key_proc_init+0x0/0x59 returned 0 after 0 msecs > calling selinux_nf_ip_init+0x0/0x4c > SELinux: Registering netfilter hooks > initcall selinux_nf_ip_init+0x0/0x4c returned 0 after 3 msecs > calling init_sel_fs+0x0/0x5e > initcall init_sel_fs+0x0/0x5e returned 0 after 0 msecs > calling selnl_init+0x0/0x4d > initcall selnl_init+0x0/0x4d returned 0 after 0 msecs > calling sel_netif_init+0x0/0x66 > initcall sel_netif_init+0x0/0x66 returned 0 after 0 msecs > calling sel_netnode_init+0x0/0x78 > initcall sel_netnode_init+0x0/0x78 returned 0 after 0 msecs > calling sel_netport_init+0x0/0x78 > initcall sel_netport_init+0x0/0x78 returned 0 after 0 msecs > calling aurule_init+0x0/0x37 > initcall aurule_init+0x0/0x37 returned 0 after 0 msecs > calling crypto_algapi_init+0x0/0xd > initcall crypto_algapi_init+0x0/0xd returned 0 after 0 msecs > calling blkcipher_module_init+0x0/0x20 > initcall blkcipher_module_init+0x0/0x20 returned 0 after 0 msecs > calling seqiv_module_init+0x0/0xc > initcall seqiv_module_init+0x0/0xc returned 0 after 0 msecs > calling cryptomgr_init+0x0/0xc > initcall cryptomgr_init+0x0/0xc returned 0 after 0 msecs > calling hmac_module_init+0x0/0xc > initcall hmac_module_init+0x0/0xc returned 0 after 0 msecs > calling md5_mod_init+0x0/0xc > initcall md5_mod_init+0x0/0xc returned 0 after 0 msecs > calling rmd128_mod_init+0x0/0xc > initcall rmd128_mod_init+0x0/0xc returned 0 after 0 msecs > calling rmd160_mod_init+0x0/0xc > initcall rmd160_mod_init+0x0/0xc returned 0 after 0 msecs > calling rmd256_mod_init+0x0/0xc > initcall rmd256_mod_init+0x0/0xc returned 0 after 0 msecs > calling rmd320_mod_init+0x0/0xc > initcall rmd320_mod_init+0x0/0xc returned 0 after 0 msecs > calling sha1_generic_mod_init+0x0/0xc > initcall sha1_generic_mod_init+0x0/0xc returned 0 after 0 msecs > calling sha256_generic_mod_init+0x0/0x35 > initcall sha256_generic_mod_init+0x0/0x35 returned 0 after 0 msecs > calling sha512_generic_mod_init+0x0/0x35 > initcall sha512_generic_mod_init+0x0/0x35 returned 0 after 0 msecs > calling crypto_ecb_module_init+0x0/0xc > initcall crypto_ecb_module_init+0x0/0xc returned 0 after 0 msecs > calling crypto_cbc_module_init+0x0/0xc > initcall crypto_cbc_module_init+0x0/0xc returned 0 after 0 msecs > calling crypto_module_init+0x0/0xc > initcall crypto_module_init+0x0/0xc returned 0 after 0 msecs > calling crypto_ctr_module_init+0x0/0x35 > initcall crypto_ctr_module_init+0x0/0x35 returned 0 after 0 msecs > calling crypto_ccm_module_init+0x0/0x53 > initcall crypto_ccm_module_init+0x0/0x53 returned 0 after 0 msecs > calling cryptd_init+0x0/0xa8 > initcall cryptd_init+0x0/0xa8 returned 0 after 0 msecs > calling des_generic_mod_init+0x0/0x35 > initcall des_generic_mod_init+0x0/0x35 returned 0 after 0 msecs > calling fcrypt_mod_init+0x0/0xc > initcall fcrypt_mod_init+0x0/0xc returned 0 after 0 msecs > calling serpent_mod_init+0x0/0x35 > initcall serpent_mod_init+0x0/0x35 returned 0 after 0 msecs > calling aes_init+0x0/0x2c5 > initcall aes_init+0x0/0x2c5 returned 0 after 0 msecs > calling cast5_mod_init+0x0/0xc > initcall cast5_mod_init+0x0/0xc returned 0 after 0 msecs > calling arc4_init+0x0/0xc > initcall arc4_init+0x0/0xc returned 0 after 0 msecs > calling khazad_mod_init+0x0/0xc > initcall khazad_mod_init+0x0/0xc returned 0 after 0 msecs > calling seed_init+0x0/0xc > initcall seed_init+0x0/0xc returned 0 after 0 msecs > calling salsa20_generic_mod_init+0x0/0xc > initcall salsa20_generic_mod_init+0x0/0xc returned 0 after 0 msecs > calling deflate_mod_init+0x0/0xc > initcall deflate_mod_init+0x0/0xc returned 0 after 0 msecs > calling crc32c_mod_init+0x0/0x35 > initcall crc32c_mod_init+0x0/0x35 returned 0 after 0 msecs > calling crypto_authenc_module_init+0x0/0xc > initcall crypto_authenc_module_init+0x0/0xc returned 0 after 0 msecs > calling bsg_init+0x0/0x11a > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) > initcall bsg_init+0x0/0x11a returned 0 after 5 msecs > calling noop_init+0x0/0x14 > io scheduler noop registered (default) > initcall noop_init+0x0/0x14 returned 0 after 3 msecs > calling percpu_counter_startup+0x0/0x14 > initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs > calling pci_init+0x0/0x2b > pci 0000:01:00.0: Boot video device > initcall pci_init+0x0/0x2b returned 0 after 3 msecs > calling pci_proc_init+0x0/0x60 > initcall pci_proc_init+0x0/0x60 returned 0 after 0 msecs > calling ltv350qv_init+0x0/0xc > initcall ltv350qv_init+0x0/0xc returned 0 after 0 msecs > calling corgibl_init+0x0/0xc > initcall corgibl_init+0x0/0xc returned 0 after 0 msecs > calling acpi_reserve_resources+0x0/0xeb > initcall acpi_reserve_resources+0x0/0xeb returned 0 after 0 msecs > calling acpi_ac_init+0x0/0x28 > initcall acpi_ac_init+0x0/0x28 returned 0 after 0 msecs > calling acpi_battery_init+0x0/0x28 > initcall acpi_battery_init+0x0/0x28 returned 0 after 0 msecs > calling acpi_button_init+0x0/0x5e > input: Power Button (FF) as /class/input/input0 > ACPI: Power Button (FF) [PWRF] > input: Sleep Button (CM) as /class/input/input1 > ACPI: Sleep Button (CM) [SLPB] > initcall acpi_button_init+0x0/0x5e returned 0 after 14 msecs > calling acpi_fan_init+0x0/0x5e > initcall acpi_fan_init+0x0/0x5e returned 0 after 0 msecs > calling irqrouter_init_sysfs+0x0/0x37 > initcall irqrouter_init_sysfs+0x0/0x37 returned 0 after 0 msecs > calling acpi_processor_init+0x0/0xf6 > ACPI: ACPI0007:00 is registered as cooling_device0 > ACPI: ACPI0007:01 is registered as cooling_device1 > initcall acpi_processor_init+0x0/0xf6 returned 0 after 9 msecs > calling acpi_container_init+0x0/0x43 > initcall acpi_container_init+0x0/0x43 returned 0 after 1 msecs > calling toshiba_acpi_init+0x0/0x17d > initcall toshiba_acpi_init+0x0/0x17d returned -19 after 0 msecs > calling acpi_smb_hc_init+0x0/0x18 > initcall acpi_smb_hc_init+0x0/0x18 returned 0 after 0 msecs > calling acpi_sbs_init+0x0/0x28 > initcall acpi_sbs_init+0x0/0x28 returned 0 after 0 msecs > calling rand_initialize+0x0/0x2c > initcall rand_initialize+0x0/0x2c returned 0 after 0 msecs > calling tty_init+0x0/0x1c5 > initcall tty_init+0x0/0x1c5 returned 0 after 25 msecs > calling pty_init+0x0/0x46e > initcall pty_init+0x0/0x46e returned 0 after 25 msecs > calling raw_init+0x0/0xca > initcall raw_init+0x0/0xca returned 0 after 0 msecs > calling r3964_init+0x0/0x3a > r3964: Philips r3964 Driver $Revision: 1.10 $ > initcall r3964_init+0x0/0x3a returned 0 after 3 msecs > calling applicom_init+0x0/0x4cc > Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ > ac.o: No PCI boards found. > ac.o: For an ISA board you must supply memory and irq parameters. > initcall applicom_init+0x0/0x4cc returned -6 after 13 msecs > initcall applicom_init+0x0/0x4cc returned with error code -6 > calling rtc_init+0x0/0xa6 > Real Time Clock Driver v1.12ac > initcall rtc_init+0x0/0xa6 returned 0 after 2 msecs > calling hpet_init+0x0/0x60 > initcall hpet_init+0x0/0x60 returned 0 after 0 msecs > calling nvram_init+0x0/0x80 > Non-volatile memory driver v1.2 > initcall nvram_init+0x0/0x80 returned 0 after 2 msecs > calling i8k_init+0x0/0x154 > initcall i8k_init+0x0/0x154 returned -19 after 0 msecs > calling mod_init+0x0/0x1da > initcall mod_init+0x0/0x1da returned -19 after 0 msecs > calling ppdev_init+0x0/0xa7 > ppdev: user-space parallel port driver > initcall ppdev_init+0x0/0xa7 returned 0 after 3 msecs > calling tlclk_init+0x0/0x1ae > telclk_interrup = 0xf non-mcpbl0010 hw. > initcall tlclk_init+0x0/0x1ae returned -6 after 3 msecs > initcall tlclk_init+0x0/0x1ae returned with error code -6 > calling agp_init+0x0/0x26 > Linux agpgart interface v0.103 > initcall agp_init+0x0/0x26 returned 0 after 2 msecs > calling agp_intel_init+0x0/0x24 > initcall agp_intel_init+0x0/0x24 returned 0 after 0 msecs > calling agp_via_init+0x0/0x24 > initcall agp_via_init+0x0/0x24 returned 0 after 0 msecs > calling init_atmel+0x0/0x17c > initcall init_atmel+0x0/0x17c returned -19 after 0 msecs > calling drm_core_init+0x0/0xef > [drm] Initialized drm 1.1.0 20060810 > initcall drm_core_init+0x0/0xef returned 0 after 3 msecs > calling tdfx_init+0x0/0xc > initcall tdfx_init+0x0/0xc returned 0 after 0 msecs > calling radeon_init+0x0/0x18 > pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:01:00.0 to 64 > [drm] Initialized radeon 1.29.0 20080528 on minor 0 > initcall radeon_init+0x0/0x18 returned 0 after 15 msecs > calling i810_init+0x0/0x18 > initcall i810_init+0x0/0x18 returned 0 after 0 msecs > calling i915_init+0x0/0x18 > initcall i915_init+0x0/0x18 returned 0 after 0 msecs > calling sis_init+0x0/0x18 > initcall sis_init+0x0/0x18 returned 0 after 0 msecs > calling via_init+0x0/0x22 > initcall via_init+0x0/0x22 returned 0 after 0 msecs > calling serial8250_init+0x0/0x122 > Serial: 8250/16550 driver4 ports, IRQ sharing disabled > �serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > initcall serial8250_init+0x0/0x122 returned 0 after 251 msecs > calling jsm_init_module+0x0/0x3e > initcall jsm_init_module+0x0/0x3e returned 0 after 0 msecs > calling parport_default_proc_register+0x0/0x1b > initcall parport_default_proc_register+0x0/0x1b returned 0 after 0 msecs > calling parport_pc_init+0x0/0x338 > parport_pc 00:08: reported by Plug and Play ACPI > parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] > initcall parport_pc_init+0x0/0x338 returned 0 after 10 msecs > calling parport_ax88796_init+0x0/0xc > initcall parport_ax88796_init+0x0/0xc returned 0 after 0 msecs > calling topology_sysfs_init+0x0/0x41 > initcall topology_sysfs_init+0x0/0x41 returned 0 after 0 msecs > calling loop_init+0x0/0x196 > loop: module loaded > initcall loop_init+0x0/0x196 returned 0 after 2 msecs > calling cpqarray_init+0x0/0x251 > Compaq SMART2 Driver (v 2.6.0) > initcall cpqarray_init+0x0/0x251 returned 0 after 2 msecs > calling cciss_init+0x0/0x28 > HP CISS Driver (v 3.6.20) > initcall cciss_init+0x0/0x28 returned 0 after 2 msecs > calling ub_init+0x0/0x6a > usbcore: registered new interface driver ub > initcall ub_init+0x0/0x6a returned 0 after 3 msecs > calling pasic3_base_init+0x0/0x13 > initcall pasic3_base_init+0x0/0x13 returned -19 after 0 msecs > calling e1000_init_module+0x0/0x61 > e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 > e1000e: Copyright (c) 1999-2008 Intel Corporation. > e1000e 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:04:00.0 to 64 > eth0: (PCI Express:2.5GB/s:Width x1) 00:16:76:ab:6e:84 > eth0: Intel(R) PRO/1000 Network Connection > eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff > initcall e1000_init_module+0x0/0x61 returned 0 after 141 msecs > calling ixgb_init_module+0x0/0x4b > Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI > Copyright (c) 1999-2008 Intel Corporation. > initcall ixgb_init_module+0x0/0x4b returned 0 after 8 msecs > calling ipg_init_module+0x0/0x15 > initcall ipg_init_module+0x0/0x15 returned 0 after 0 msecs > calling cxgb3_init_module+0x0/0x20 > initcall cxgb3_init_module+0x0/0x20 returned 0 after 0 msecs > calling vcan_init_module+0x0/0x36 > vcan: Virtual CAN interface driver > initcall vcan_init_module+0x0/0x36 returned 0 after 3 msecs > calling atl1_init_module+0x0/0x15 > initcall atl1_init_module+0x0/0x15 returned 0 after 0 msecs > calling plip_init+0x0/0x5d > NET3 PLIP version 2.4-parport gniibe@mri.co.jp > plip0: Parallel port at 0x378, using IRQ 7. > initcall plip_init+0x0/0x5d returned 0 after 8 msecs > calling gem_init+0x0/0x15 > initcall gem_init+0x0/0x15 returned 0 after 0 msecs > calling vortex_init+0x0/0xa9 > initcall vortex_init+0x0/0xa9 returned 0 after 0 msecs > calling ne2k_pci_init+0x0/0x15 > initcall ne2k_pci_init+0x0/0x15 returned 0 after 0 msecs > calling e100_init_module+0x0/0x5c > e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI > e100: Copyright(c) 1999-2006 Intel Corporation > initcall e100_init_module+0x0/0x5c returned 0 after 8 msecs > calling tlan_probe+0x0/0xda > ThunderLAN driver v1.15 > TLAN: 0 devices installed, PCI: 0 EISA: 0 > initcall tlan_probe+0x0/0xda returned -19 after 5 msecs > calling epic_init+0x0/0x15 > initcall epic_init+0x0/0x15 returned 0 after 0 msecs > calling sis190_init_module+0x0/0x15 > initcall sis190_init_module+0x0/0x15 returned 0 after 0 msecs > calling r6040_init+0x0/0x15 > initcall r6040_init+0x0/0x15 returned 0 after 0 msecs > calling yellowfin_init+0x0/0x15 > initcall yellowfin_init+0x0/0x15 returned 0 after 0 msecs > calling natsemi_init_mod+0x0/0x15 > initcall natsemi_init_mod+0x0/0x15 returned 0 after 0 msecs > calling ns83820_init+0x0/0x28 > ns83820.c: National Semiconductor DP83820 10/100/1000 driver. > initcall ns83820_init+0x0/0x28 returned 0 after 5 msecs > calling tg3_init+0x0/0x15 > initcall tg3_init+0x0/0x15 returned 0 after 0 msecs > calling bnx2_init+0x0/0x15 > initcall bnx2_init+0x0/0x15 returned 0 after 0 msecs > calling bnx2x_init+0x0/0x15 > initcall bnx2x_init+0x0/0x15 returned 0 after 0 msecs > calling skge_init_module+0x0/0x15 > initcall skge_init_module+0x0/0x15 returned 0 after 0 msecs > calling sky2_init_module+0x0/0x49 > initcall sky2_init_module+0x0/0x49 returned 0 after 0 msecs > calling rhine_init+0x0/0x39 > initcall rhine_init+0x0/0x39 returned 0 after 0 msecs > calling starfire_init+0x0/0x15 > initcall starfire_init+0x0/0x15 returned 0 after 0 msecs > calling marvell_init+0x0/0x5e > initcall marvell_init+0x0/0x5e returned 0 after 0 msecs > calling cicada_init+0x0/0x35 > initcall cicada_init+0x0/0x35 returned 0 after 0 msecs > calling lxt_init+0x0/0x35 > initcall lxt_init+0x0/0x35 returned 0 after 0 msecs > calling qs6612_init+0x0/0xc > initcall qs6612_init+0x0/0xc returned 0 after 0 msecs > calling ip175c_init+0x0/0xc > initcall ip175c_init+0x0/0xc returned 0 after 0 msecs > calling fixed_mdio_bus_init+0x0/0x9e > Fixed MDIO Bus: probed > initcall fixed_mdio_bus_init+0x0/0x9e returned 0 after 2 msecs > calling sundance_init+0x0/0x15 > initcall sundance_init+0x0/0x15 returned 0 after 0 msecs > calling hamachi_init+0x0/0x15 > initcall hamachi_init+0x0/0x15 returned 0 after 0 msecs > calling net_olddevs_init+0x0/0x95 > initcall net_olddevs_init+0x0/0x95 returned 0 after 0 msecs > calling b44_init+0x0/0x59 > initcall b44_init+0x0/0x59 returned 0 after 0 msecs > calling init_nic+0x0/0x15 > initcall init_nic+0x0/0x15 returned 0 after 0 msecs > calling ql3xxx_init_module+0x0/0x15 > initcall ql3xxx_init_module+0x0/0x15 returned 0 after 0 msecs > calling dummy_init_module+0x0/0xb2 > initcall dummy_init_module+0x0/0xb2 returned 0 after 0 msecs > calling macvlan_init_module+0x0/0x49 > initcall macvlan_init_module+0x0/0x49 returned 0 after 0 msecs > calling dfx_init+0x0/0x15 > initcall dfx_init+0x0/0x15 returned 0 after 0 msecs > calling rtl8139_init_module+0x0/0x15 > initcall rtl8139_init_module+0x0/0x15 returned 0 after 0 msecs > calling atp_init_module+0x0/0x93 > atp.c:v1.09=ac 2002/10/01 Donald Becker > initcall atp_init_module+0x0/0x93 returned -19 after 5 msecs > calling eql_init_module+0x0/0x5b > Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) > initcall eql_init_module+0x0/0x5b returned 0 after 7 msecs > calling tun_init+0x0/0x96 > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky > initcall tun_init+0x0/0x96 returned 0 after 8 msecs > calling rio_init+0x0/0x15 > initcall rio_init+0x0/0x15 returned 0 after 0 msecs > calling s2io_starter+0x0/0x15 > initcall s2io_starter+0x0/0x15 returned 0 after 0 msecs > calling xl_pci_init+0x0/0x15 > initcall xl_pci_init+0x0/0x15 returned 0 after 0 msecs > calling init_dlci+0x0/0x35 > DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org. > initcall init_dlci+0x0/0x35 returned 0 after 4 msecs > calling usb_rtl8150_init+0x0/0x28 > rtl8150: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27) > usbcore: registered new interface driver rtl8150 > initcall usb_rtl8150_init+0x0/0x28 returned 0 after 9 msecs > calling cdc_init+0x0/0x15 > usbcore: registered new interface driver cdc_ether > initcall cdc_init+0x0/0x15 returned 0 after 4 msecs > calling dm9601_init+0x0/0x15 > usbcore: registered new interface driver dm9601 > initcall dm9601_init+0x0/0x15 returned 0 after 4 msecs > calling usbnet_init+0x0/0x15 > usbcore: registered new interface driver gl620a > initcall usbnet_init+0x0/0x15 returned 0 after 4 msecs > calling plusb_init+0x0/0x15 > usbcore: registered new interface driver plusb > initcall plusb_init+0x0/0x15 returned 0 after 4 msecs > calling rndis_init+0x0/0x15 > usbcore: registered new interface driver rndis_host > initcall rndis_init+0x0/0x15 returned 0 after 4 msecs > calling cdc_subset_init+0x0/0x15 > usbcore: registered new interface driver cdc_subset > initcall cdc_subset_init+0x0/0x15 returned 0 after 4 msecs > calling mcs7830_init+0x0/0x15 > usbcore: registered new interface driver MOSCHIP usb-ethernet driver > initcall mcs7830_init+0x0/0x15 returned 0 after 5 msecs > calling usbnet_init+0x0/0x2b > initcall usbnet_init+0x0/0x2b returned 0 after 0 msecs > calling ipw2100_init+0x0/0x65 > ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 > ipw2100: Copyright(c) 2003-2006 Intel Corporation > initcall ipw2100_init+0x0/0x65 returned 0 after 9 msecs > calling ipw_init+0x0/0x7f > ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kd > ipw2200: Copyright(c) 2003-2006 Intel Corporation > initcall ipw_init+0x0/0x7f returned 0 after 9 msecs > calling init_orinoco+0x0/0x1d > orinoco 0.15 (David Gibson , Pavel Roskin , et al) > initcall init_orinoco+0x0/0x1d returned 0 after 8 msecs > calling init_hermes+0x0/0x3 > initcall init_hermes+0x0/0x3 returned 0 after 0 msecs > calling orinoco_plx_init+0x0/0x2f > orinoco_plx 0.15 (Pavel Roskin , David Gibson , Daniel Barlow ) > initcall orinoco_plx_init+0x0/0x2f returned 0 after 10 msecs > calling orinoco_nortel_init+0x0/0x2f > orinoco_nortel 0.15 (Tobias Hoffmann & Christoph Jungegger ) > initcall orinoco_nortel_init+0x0/0x2f returned 0 after 6 msecs > calling airo_init_module+0x0/0xe3 > airo(): Probing for PCI adapters > airo(): Finished probing for PCI adapters > initcall airo_init_module+0x0/0xe3 returned 0 after 6 msecs > calling prism54_module_init+0x0/0x36 > Loaded prism54 driver, version 1.2 > initcall prism54_module_init+0x0/0x36 returned 0 after 3 msecs > calling b43_init+0x0/0x42 > Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] > initcall b43_init+0x0/0x42 returned 0 after 5 msecs > calling usb_init+0x0/0xad > zd1211rw usb_init() > usbcore: registered new interface driver zd1211rw > zd1211rw initialized > initcall usb_init+0x0/0xad returned 0 after 8 msecs > calling rndis_wlan_init+0x0/0x15 > usbcore: registered new interface driver rndis_wlan > initcall rndis_wlan_init+0x0/0x15 returned 0 after 4 msecs > calling zd1201_init+0x0/0x15 > usbcore: registered new interface driver zd1201 > initcall zd1201_init+0x0/0x15 returned 0 after 4 msecs > calling lbs_init_module+0x0/0x38 > initcall lbs_init_module+0x0/0x38 returned 0 after 0 msecs > calling if_sdio_init_module+0x0/0x2d > libertas_sdio: Libertas SDIO driver > libertas_sdio: Copyright Pierre Ossman > initcall if_sdio_init_module+0x0/0x2d returned 0 after 6 msecs > calling rtl8180_init+0x0/0x15 > initcall rtl8180_init+0x0/0x15 returned 0 after 0 msecs > calling rtl8187_init+0x0/0x15 > usbcore: registered new interface driver rtl8187 > initcall rtl8187_init+0x0/0x15 returned 0 after 4 msecs > calling iwl4965_init+0x0/0x6c > iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.3.27kd > iwl4965: Copyright(c) 2003-2008 Intel Corporation > initcall iwl4965_init+0x0/0x6c returned 0 after 10 msecs > calling init_mac80211_hwsim+0x0/0x2f0 > mac80211_hwsim: Initializing radio 0 > phy0: Failed to select rate control algorithm > phy0: Failed to initialize rate control algorithm > mac80211_hwsim: ieee80211_register_hw failed (-2) > BUG: unable to handle kernel NULL pointer dereference at 0000000000000370 > IP: [] rollback_registered+0x37/0xfb > PGD 0 > Oops: 0000 [1] SMP > CPU 1 > Pid: 1, comm: swapper Not tainted 2.6.26-05253-g14b395e #21308 > RIP: 0010:[] [] rollback_registered+0x37/0xfb > RSP: 0018:ffff88003f83fe00 EFLAGS: 00010212 > RAX: 0000000000000001 RBX: 0000000000000000 RCX: ffff88003d078ed8 > RDX: ffffffff8095de3d RSI: 0000000000000046 RDI: 0000000000000000 > RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8800042facc0 > R10: 0000000000000000 R11: ffffffff804021ae R12: 0000000000000000 > R13: ffff88003d0799a0 R14: 0000000000000000 R15: 0000000000000008 > FS: 0000000000000000(0000) GS:ffff88003f829160(0000) knlGS:0000000000000000 > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b > CR2: 0000000000000370 CR3: 0000000000201000 CR4: 00000000000006e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process swapper (pid: 1, threadinfo ffff88003f83e000, task ffff88003f824000) > Stack: 0000000000000000 ffffffff808be1b8 ffff88003d0782c0 ffffffff809621ab > ffff88003d0799a0 ffffffff805f1e5d 00000000fffffffe ffff88003d0782c0 > ffff88003d0799e0 ffffffff811e83e4 ffff88003f83fea0 ffffffff80248f12 > Call Trace: > [] unregister_netdevice+0x32/0x71 > [] ieee80211_unregister_hw+0x35/0xd4 > [] mac80211_hwsim_free+0x1d/0x6a > [] init_mac80211_hwsim+0x2df/0x2f0 > [] getnstimeofday+0x38/0x95 > [] ktime_get_ts+0x21/0x49 > [] init_mac80211_hwsim+0x0/0x2f0 > [] kernel_init+0x143/0x295 > [] __switch_to+0xb6/0x3bb > [] child_rip+0xa/0x11 > [] kernel_init+0x0/0x295 > [] child_rip+0x0/0x11 > > > Code: 04 0f 0b eb fe e8 e3 78 00 00 85 c0 75 1d ba ce 0e 00 00 48 c7 c6 b8 e1 d8 80 48 c7 c7 3b 6c ce 80 e8 24 65 97 ff e8 0e f8 94 ff <8b> 83 70 03 00 00 85 c0 75 24 48 89 de 48 89 da 48 c7 c7 e4 e4 > RIP [] rollback_registered+0x37/0xfb > RSP > CR2: 0000000000000370 > ---[ end trace 4b01b4c1a97dbebf ]--- > Kernel panic - not syncing: Attempted to kill init! ????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay?ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?