Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754722AbYHFEGI (ORCPT ); Wed, 6 Aug 2008 00:06:08 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751515AbYHFEFz (ORCPT ); Wed, 6 Aug 2008 00:05:55 -0400 Received: from rv-out-0506.google.com ([209.85.198.236]:51761 "EHLO rv-out-0506.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751282AbYHFEFw (ORCPT ); Wed, 6 Aug 2008 00:05:52 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version :content-type:content-transfer-encoding:content-disposition :references; b=dJngfaraFgpns7do55pBku2vO2mU1p+xNKrxwprckXFIxC6mjxbh+f7T0ikJjdvi+v wlLk6Alwtqq+2n38kpKdVilUFBvQCl9+KBi9GLqgtLmAfTtx4KrWx8dElaerZ8EDzTyL vGQW6DoD7PKfrFuM3HN5SdyMVbBF2B6RiVV+U= Message-ID: Date: Wed, 6 Aug 2008 12:05:51 +0800 From: "Jeff Chua" To: "Yinghai Lu" Subject: Re: 2.6.27rc1 cannot boot more than 8CPUs Cc: lkml In-Reply-To: <86802c440808052050u489264beo30812523669ef4df@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <86802c440808052050u489264beo30812523669ef4df@mail.gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 24425 Lines: 517 On Wed, Aug 6, 2008 at 11:50 AM, Yinghai Lu wrote: > 32bit or 64 bit? 32bit. High Memory Support (64GB) ---> -*- PAE (Physical Address Extension) Support Memory model (Sparse Memory) ---> -*- 64 bit Memory and IO resources (EXPERIMENTAL) [*] Allocate 3rd-level pagetables from highmem > can you post full demsg? The following is "cut&paste" ... (gmail is not the a good way to do this.) for the 8 cpus that I managed to boot. routine.. 3723.90 BogoMIPS (lpj=7447810) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 6 CPU: Processor Core ID: 0 x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#3]: passed. CPU 4 irqstacks, hard=c053f000 soft=c051f000 Booting processor 4/2 ip 6000 Initializing CPU#4 Calibrating delay using timer specific routine.. 3723.87 BogoMIPS (lpj=7447748) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 CPU4: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#4]: passed. CPU 5 irqstacks, hard=c0540000 soft=c0520000 Booting processor 5/10 ip 6000 Initializing CPU#5 Calibrating delay using timer specific routine.. 3723.89 BogoMIPS (lpj=7447794) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 2 CPU: Processor Core ID: 2 x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 CPU5: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#5]: passed. CPU 6 irqstacks, hard=c0541000 soft=c0521000 Booting processor 6/18 ip 6000 Initializing CPU#6 Calibrating delay using timer specific routine.. 3723.89 BogoMIPS (lpj=7447791) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 4 CPU: Processor Core ID: 2 x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 CPU6: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#6]: passed. CPU 7 irqstacks, hard=c0542000 soft=c0522000 Booting processor 7/26 ip 6000 Initializing CPU#7 Calibrating delay using timer specific routine.. 3723.88 BogoMIPS (lpj=7447769) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 6 CPU: Processor Core ID: 2 x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 CPU7: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#7]: passed. Brought up 8 CPUs Total of 8 processors activated (29791.07 BogoMIPS). net_namespace: 596 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 No dock devices found. ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: Using configuration type 1 for base access PCI: Dell PowerEdge R900 detected, enabling pci=bfsort. ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: DMI System Vendor: Dell Inc. ACPI: DMI Product Name: PowerEdge R900 ACPI: DMI Product Version: ACPI: DMI Board Name: 0C764H ACPI: DMI BIOS Vendor: Dell Inc. ACPI: DMI BIOS Date: 03/23/2008 ACPI: Please send DMI info above to linux-acpi@vger.kernel.org ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:16:00.0: PME# supported from D0 D3hot D3cold pci 0000:16:00.0: PME# disabled pci 0000:16:00.3: PME# supported from D0 D3hot D3cold pci 0000:16:00.3: PME# disabled pci 0000:17:00.0: PME# supported from D0 D3hot D3cold pci 0000:17:00.0: PME# disabled pci 0000:17:01.0: PME# supported from D0 D3hot D3cold pci 0000:17:01.0: PME# disabled pci 0000:19:00.0: supports D1 pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:02:01.0: PME# supported from D0 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:02:02.0: PME# supported from D0 D3hot D3cold pci 0000:02:02.0: PME# disabled pci 0000:02:03.0: PME# supported from D0 D3hot D3cold pci 0000:02:03.0: PME# disabled pci 0000:02:04.0: PME# supported from D0 D3hot D3cold pci 0000:02:04.0: PME# disabled pci 0000:02:05.0: PME# supported from D0 D3hot D3cold pci 0000:02:05.0: PME# disabled pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold pci 0000:0a:00.0: PME# disabled pci 0000:0b:00.0: PME# supported from D3hot D3cold pci 0000:0b:00.0: PME# disabled pci 0000:08:00.0: PME# supported from D0 D3hot D3cold pci 0000:08:00.0: PME# disabled pci 0000:09:00.0: PME# supported from D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:07:00.0: PME# supported from D3hot D3cold pci 0000:07:00.0: PME# disabled pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold pci 0000:0d:02.0: PME# disabled pci 0000:0d:04.0: PME# supported from D0 D3hot D3cold pci 0000:0d:04.0: PME# disabled pci 0000:10:00.0: PME# supported from D0 D3hot D3cold pci 0000:10:00.0: PME# disabled pci 0000:11:02.0: PME# supported from D0 D3hot D3cold pci 0000:11:02.0: PME# disabled pci 0000:11:04.0: PME# supported from D0 D3hot D3cold pci 0000:11:04.0: PME# disabled pci 0000:1b:0c.0: supports D1 pci 0000:1b:0c.0: supports D2 pci 0000:00:1e.0: transparent bridge bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN2.BCOM._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN3.BCOM._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN4.BCOM._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN5.BCOM._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.UPST.DWNB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.UPST.DWNC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.UPST.DWNB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.UPST.DWNC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 *6 7 10 11 12) ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 12) ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 5 Switched to high resolution mode on CPU 6 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 4 Switched to high resolution mode on CPU 7 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 3 system 00:07: ioport range 0x800-0x87f has been reserved system 00:07: ioport range 0x880-0x8bf has been reserved system 00:07: ioport range 0x8c0-0x8df has been reserved system 00:07: ioport range 0x8e0-0x8e3 has been reserved system 00:07: ioport range 0x8f0-0x8f1 has been reserved system 00:07: ioport range 0x900-0x900 has been reserved system 00:07: ioport range 0xc00-0xc7f has been reserved system 00:07: ioport range 0xca0-0xca7 has been reserved system 00:07: ioport range 0xca9-0xcab has been reserved system 00:07: ioport range 0xcad-0xcaf has been reserved system 00:08: ioport range 0xca8-0xca8 has been reserved system 00:08: ioport range 0xcac-0xcac has been reserved system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:14 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: disabled pci 0000:00:01.0: PREFETCH window: disabled pci 0000:17:00.0: PCI bridge, secondary bus 0000:19 pci 0000:17:00.0: IO window: 0xe000-0xefff pci 0000:17:00.0: MEM window: 0xde200000-0xde3fffff pci 0000:17:00.0: PREFETCH window: disabled pci 0000:17:01.0: PCI bridge, secondary bus 0000:18 pci 0000:17:01.0: IO window: disabled pci 0000:17:01.0: MEM window: disabled pci 0000:17:01.0: PREFETCH window: disabled pci 0000:16:00.0: PCI bridge, secondary bus 0000:17 pci 0000:16:00.0: IO window: 0xe000-0xefff pci 0000:16:00.0: MEM window: 0xde200000-0xde3fffff pci 0000:16:00.0: PREFETCH window: disabled pci 0000:16:00.3: PCI bridge, secondary bus 0000:1a pci 0000:16:00.3: IO window: disabled pci 0000:16:00.3: MEM window: disabled pci 0000:16:00.3: PREFETCH window: disabled pci 0000:00:02.0: PCI bridge, secondary bus 0000:16 pci 0000:00:02.0: IO window: 0xe000-0xefff pci 0000:00:02.0: MEM window: 0xde100000-0xde3fffff pci 0000:00:02.0: PREFETCH window: disabled pci 0000:02:01.0: PCI bridge, secondary bus 0000:03 pci 0000:02:01.0: IO window: disabled pci 0000:02:01.0: MEM window: disabled pci 0000:02:01.0: PREFETCH window: disabled pci 0000:0a:00.0: PCI bridge, secondary bus 0000:0b pci 0000:0a:00.0: IO window: disabled pci 0000:0a:00.0: MEM window: 0xd6000000-0xd7ffffff pci 0000:0a:00.0: PREFETCH window: disabled pci 0000:02:02.0: PCI bridge, secondary bus 0000:0a pci 0000:02:02.0: IO window: disabled pci 0000:02:02.0: MEM window: 0xd6000000-0xd7ffffff pci 0000:02:02.0: PREFETCH window: disabled pci 0000:08:00.0: PCI bridge, secondary bus 0000:09 pci 0000:08:00.0: IO window: disabled pci 0000:08:00.0: MEM window: 0xd8000000-0xd9ffffff pci 0000:08:00.0: PREFETCH window: disabled pci 0000:02:03.0: PCI bridge, secondary bus 0000:08 pci 0000:02:03.0: IO window: disabled pci 0000:02:03.0: MEM window: 0xd8000000-0xd9ffffff pci 0000:02:03.0: PREFETCH window: disabled pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 pci 0000:06:00.0: IO window: disabled pci 0000:06:00.0: MEM window: 0xda000000-0xdbffffff pci 0000:06:00.0: PREFETCH window: disabled pci 0000:02:04.0: PCI bridge, secondary bus 0000:06 pci 0000:02:04.0: IO window: disabled pci 0000:02:04.0: MEM window: 0xda000000-0xdbffffff pci 0000:02:04.0: PREFETCH window: disabled pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 pci 0000:04:00.0: IO window: disabled pci 0000:04:00.0: MEM window: 0xdc000000-0xddffffff pci 0000:04:00.0: PREFETCH window: disabled pci 0000:02:05.0: PCI bridge, secondary bus 0000:04 pci 0000:02:05.0: IO window: disabled pci 0000:02:05.0: MEM window: 0xdc000000-0xddffffff pci 0000:02:05.0: PREFETCH window: disabled pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 pci 0000:01:00.0: IO window: disabled pci 0000:01:00.0: MEM window: 0xd6000000-0xddffffff pci 0000:01:00.0: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: 0xd6000000-0xddffffff pci 0000:00:03.0: PREFETCH window: disabled pci 0000:0d:02.0: PCI bridge, secondary bus 0000:0f pci 0000:0d:02.0: IO window: disabled pci 0000:0d:02.0: MEM window: disabled pci 0000:0d:02.0: PREFETCH window: disabled pci 0000:0d:04.0: PCI bridge, secondary bus 0000:0e pci 0000:0d:04.0: IO window: disabled pci 0000:0d:04.0: MEM window: disabled pci 0000:0d:04.0: PREFETCH window: disabled pci 0000:0c:00.0: PCI bridge, secondary bus 0000:0d pci 0000:0c:00.0: IO window: disabled pci 0000:0c:00.0: MEM window: disabled pci 0000:0c:00.0: PREFETCH window: disabled pci 0000:00:04.0: PCI bridge, secondary bus 0000:0c pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM window: disabled pci 0000:00:04.0: PREFETCH window: disabled pci 0000:11:02.0: PCI bridge, secondary bus 0000:13 pci 0000:11:02.0: IO window: disabled pci 0000:11:02.0: MEM window: disabled pci 0000:11:02.0: PREFETCH window: disabled pci 0000:11:04.0: PCI bridge, secondary bus 0000:12 pci 0000:11:04.0: IO window: disabled pci 0000:11:04.0: MEM window: disabled pci 0000:11:04.0: PREFETCH window: disabled pci 0000:10:00.0: PCI bridge, secondary bus 0000:11 pci 0000:10:00.0: IO window: disabled pci 0000:00:06.0: MEM window: disabled pci 0000:00:06.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:15 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:1b pci 0000:00:1e.0: IO window: 0xd000-0xdfff pci 0000:00:1e.0: MEM window: 0xde400000-0xde4fffff pci 0000:00:1e.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff pci 0000:00:01.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:02.0: setting latency timer to 64 pci 0000:16:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:16:00.0: setting latency timer to 64 pci 0000:17:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:17:00.0: setting latency timer to 64 pci 0000:17:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:17:01.0: setting latency timer to 64 pci 0000:16:00.3: setting latency timer to 64 pci 0000:00:03.0: PCI INT A -> GSI 37 (level, low) -> IRQ 37 pci 0000:00:03.0: setting latency timer to 64 pci 0000:01:00.0: setting latency timer to 64 pci 0000:02:01.0: setting latency timer to 64 pci 0000:02:02.0: setting latency timer to 64 pci 0000:0a:00.0: setting latency timer to 64 pci 0000:02:03.0: setting latency timer to 64 pci 0000:08:00.0: setting latency timer to 64 pci 0000:02:04.0: setting latency timer to 64 pci 0000:06:00.0: setting latency timer to 64 pci 0000:02:05.0: setting latency timer to 64 pci 0000:04:00.0: setting latency timer to 64 pci 0000:04:00.0: setting latency timer to 64 pci 0000:00:04.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:00:04.0: setting latency timer to 64 pci 0000:0c:00.0: setting latency timer to 64 pci 0000:0d:02.0: setting latency timer to 64 pci 0000:0d:04.0: setting latency timer to 64 pci 0000:00:06.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci 0000:00:06.0: setting latency timer to 64 pci 0000:10:00.0: setting latency timer to 64 pci 0000:11:02.0: setting latency timer to 64 pci 0000:11:04.0: setting latency timer to 64 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 1234 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered (default) pci 0000:1b:0c.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:02.0: found MSI capability pci_express 0000:00:02.0:pcie00: allocate port service pci_express 0000:00:02.0:pcie00: allocate port service pcieport-driver 0000:00:03.0: setting latency timer to 64 pcieport-driver 0000:00:03.0: found MSI capability pci_express 0000:00:03.0:pcie00: allocate port service pcieport-driver 0000:00:04.0: setting latency timer to 64 pcieport-driver 0000:00:04.0: found MSI capability pci_express 0000:00:04.0:pcie00: allocate port service pcieport-driver 0000:00:06.0: setting latency timer to 64 pcieport-driver 0000:00:06.0: found MSI capability pci_express 0000:00:06.0:pcie00: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pcieport-driver 0000:01:00.0: setting latency timer to 64 pcieport-driver 0000:02:01.0: setting latency timer to 64 pcieport-driver 0000:02:01.0: found MSI capability pcieport-driver 0000:02:02.0: setting latency timer to 64 pcieport-driver 0000:02:02.0: found MSI capability pcieport-driver 0000:02:03.0: setting latency timer to 64 pcieport-driver 0000:02:03.0: found MSI capability pcieport-driver 0000:02:04.0: setting latency timer to 64 pcieport-driver 0000:02:04.0: found MSI capability pcieport-driver 0000:02:05.0: setting latency timer to 64 pcieport-driver 0000:02:05.0: found MSI capability pcieport-driver 0000:0c:00.0: setting latency timer to 64 pcieport-driver 0000:0d:02.0: setting latency timer to 64 pcieport-driver 0000:0d:02.0: found MSI capability pcieport-driver 0000:0d:04.0: setting latency timer to 64 pcieport-driver 0000:0d:04.0: found MSI capability pcieport-driver 0000:10:00.0: setting latency timer to 64 pcieport-driver 0000:11:02.0: setting latency timer to 64 pcieport-driver 0000:11:02.0: found MSI capability ACPI: Power Button (FF) [PWRF] processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 processor ACPI0007:02: registered as cooling_device2 processor ACPI0007:03: registered as cooling_device3 processor ACPI0007:04: registered as cooling_device4 processor ACPI0007:05: registered as cooling_device5 processor ACPI0007:06: registered as cooling_device6 processor ACPI0007:07: registered as cooling_device7 Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.9 (July 18, 2008) bnx2 0000:05:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem dc000000, IRQ 38, node addr 00:1e:c9:d9:84:57 bnx2 0000:07:00.0: PCI INT A -> GSI 37 (level, low) -> IRQ 37 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem da000000, IRQ 37, node addr 00:1e:c9:d9:84:59 bnx2 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 eth2: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem d8000000, IRQ 19, node addr 00:1e:c9:d9:84:5b bnx2 0000:0b:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 eth3: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem d6000000, IRQ 18, node addr 00:1e:c9:d9:84:5d PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered tun: Universal TUN/TAP device driver, 1.6 Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Probing IDE interface ide0... hda: TSSTcorpDVD-ROM TS-L333A, ATAPI CD/DVD-ROM drive Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008 megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 25:slot 0:func 0 megaraid_sas 0000:19:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 megaraid_sas 0000:19:00.0: setting latency timer to 64 megasas: FW now in Ready state scsi0 : LSI SAS based MegaRAID driver scsi 0:0:0:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:2:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:3:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:4:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:5:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:6:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:7:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5 scsi 0:0:32:0: Enclosure DP BACKPLANE 1.06 PQ: 0 ANSI: 5 scsi 0:2:0:0: Direct-Access DELL PERC 6/i 1.11 PQ: 0 ANSI: 5 Driver 'sd' needs updating - please use bus_type methods sd 0:2:0:0: [sda] 710410240 512-byte hardware sectors (363730 MB) sd 0:2:0:0: [sda] Write Protect is off sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08 sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:2:0:0: [sda] 710410240 512-byte hardware sectors (363730 MB) sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08 sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:2:0:0: [sda] 710410240 512-byte hardware sectors (363730 MB) sd 0:2:0:0: [sda] Write Protect is off sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08 sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 > sd 0:2:0:0: [sda] Attached SCSI disk ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: BAR 0: can't reserve I/O region [0x1f0-0x1f7] ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 0 (errno=-16) ata_piix 0000:00:1f.2: BAR 2: can't reserve I/O region [0x170-0x177] ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 1 (errno=-16) ata_piix 0000:00:1f.2: no available native port Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 21, io mem 0xde0ffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 ... -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/