Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 26 Nov 2000 11:14:47 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 26 Nov 2000 11:14:36 -0500 Received: from filesrv1.baby-dragons.com ([199.33.245.55]:25104 "EHLO filesrv1.baby-dragons.com") by vger.kernel.org with ESMTP id ; Sun, 26 Nov 2000 11:14:29 -0500 Date: Sun, 26 Nov 2000 07:44:00 -0800 (PST) From: "Mr. James W. Laferriere" To: Paul Jakma cc: Subject: Re: problem with hp C1537A tape drives In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello Paul , Could you add a little more info like which scsi chipset you are using & what the driver version is & what kernel version you are running also (One more )& how you have the drive chained to the scsi-bus . Someplace there is a pointer on howto reset the scsi-bus from the /proc system , BUT the method is highly not recommended . Hth , JimL On Sun, 26 Nov 2000, Paul Jakma wrote: > I have a problem with the aforementioned DDS-3 tape drives. I'm using > one with amanda for backups. But every now and then the nightly backup > fails with "I/O error" and i see the following in the system logs: > st0: Error with sense data: [valid=0] Info fld=0x0, Current st09:00: > sense key Aborted Command > Additional Sense indicates Data phase error > I try various things to get the drive to work again -> mt rewind, mt > retension, load and unload the tape. "scsi remove-single-device" -> > power off drive -> power up -> "scsi add-single-device". (it's not the > tape cause i've tried replacing tapes). > but nothing helps. now it mightn't be unreasonable to say the drive is > faulty, so i replaced the drive with an identical C1537A. And... same > thing happens again: after a couple of weeks of good backups i get the > same problem again. > Is there a known problem with SCSI tape drives? or with HP DDS-3 > drives? What does the kernel error message mean? (it's all 0's so not > much i guess). What is a "Data Phase error"? > thanks in advance, > Paul Jakma. +----------------------------------------------------------------+ | James W. Laferriere | System Techniques | Give me VMS | | Network Engineer | 25416 22nd So | Give me Linux | | babydr@baby-dragons.com | DesMoines WA 98198 | only on AXP | +----------------------------------------------------------------+ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/