Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752911AbYHLKMZ (ORCPT ); Tue, 12 Aug 2008 06:12:25 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751674AbYHLKMK (ORCPT ); Tue, 12 Aug 2008 06:12:10 -0400 Received: from gprs189-60.eurotel.cz ([160.218.189.60]:49753 "EHLO gprs189-60.eurotel.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751402AbYHLKMF (ORCPT ); Tue, 12 Aug 2008 06:12:05 -0400 Date: Tue, 12 Aug 2008 11:41:35 +0200 From: Pavel Machek To: Andi Kleen Cc: kernel list , ACPI mailing list Subject: Re: 2.6.27-rc1: critical thermal shutdown on thinkpad x60 Message-ID: <20080812094135.GA1565@elf.ucw.cz> References: <20080806090246.GA1572@elf.ucw.cz> <87bq046cht.fsf@basil.nowhere.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <87bq046cht.fsf@basil.nowhere.org> X-Warning: Reading this can be dangerous to your mental health. User-Agent: Mutt/1.5.17 (2007-11-01) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 33594 Lines: 697 Hi! > > Aug 6 11:00:10 amd kernel: ACPI: Critical trip point > > Aug 6 11:00:10 amd kernel: Critical temperature reached (128 C), > > shutting down. > > Aug 6 11:00:10 amd shutdown[24414]: shutting down for system halt > > > > ...and machine went down at that point :-(. > > I hope you can easily reproduce it? > > So it's new in 2.6.27rc1 and wasn't in 2.6.26? Can you please Yes, I'm very sure. It makes machine basically unusable. > double check that? Are there are new warnings in the boot logs > from ACPI compared to .26? Will take a look.... ... I don't see anything obvious, diff is below. > I looked through the pile of patches that went in for ACPI and the > only candidate that might have imho caused this would be > ea51011a27db48ea0a80a5e20de3969b292d5d4d. Can you please > try reverting that. If that doesn't help a full bisect will be needed. Not that one :-(. Thinkpad does not even have fan device: it is controlled by hardware. Pavel --- /tmp/dmesg.26 2008-08-12 11:38:44.000000000 +0200 +++ /tmp/dmesg.rc2 2008-08-12 11:15:44.000000000 +0200 @@ -1,4 +1,4 @@ -Linux version 2.6.26 (pavel@amd) (gcc version 4.1.3 20071209 (prerelease) (Debian 4.1.2-18)) #313 SMP Mon Jul 14 08:33:14 CEST 2008 +Linux version 2.6.27-rc2 (pavel@amd) (gcc version 4.1.3 20071209 (prerelease) (Debian 4.1.2-18)) #322 SMP Thu Aug 7 11:58:09 CEST 2008 PAT disabled. Not yet verified on this CPU type. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) @@ -16,31 +16,13 @@ BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) -1142MB HIGHMEM available. -896MB LOWMEM available. -found SMP MP-table at [c00f67f0] 000f67f0 -Entering add_active_range(0, 0, 521936) 0 entries of 256 used -Zone PFN ranges: - DMA 0 -> 4096 - Normal 4096 -> 229376 - HighMem 229376 -> 521936 -Movable zone start PFN for each node -early_node_map[1] active PFN ranges - 0: 0 -> 521936 -On node 0 totalpages: 521936 - DMA zone: 32 pages used for memmap - DMA zone: 0 pages reserved - DMA zone: 4064 pages, LIFO batch:0 - Normal zone: 1760 pages used for memmap - Normal zone: 223520 pages, LIFO batch:31 - HighMem zone: 2286 pages used for memmap - HighMem zone: 290274 pages, LIFO batch:31 - Movable zone: 0 pages used for memmap +last_pfn = 0x7f6d0 max_arch_pfn = 0x100000 +kernel direct mapping tables up to 38000000 @ 7000-c000 DMI present. ACPI: RSDP 000F67C0, 0024 (r2 LENOVO) ACPI: XSDT 7F6D191C, 0084 (r1 LENOVO TP-7B 2140 LTP 0) ACPI: FACP 7F6D1A00, 00F4 (r3 LENOVO TP-7B 2140 LNVO 1) -ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080321] +ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080609] ACPI: DSDT 7F6D1D90, CFB9 (r1 LENOVO TP-7B 2140 MSFT 100000E) ACPI: FACS 7F6F4000, 0040 ACPI: SSDT 7F6D1BB4, 01DC (r1 LENOVO TP-7B 2140 MSFT 100000E) @@ -54,6 +36,37 @@ ACPI: SSDT 7F6F28A4, 00A6 (r1 LENOVO TP-7B 2140 INTL 20050513) ACPI: SSDT 7F6F294A, 04F7 (r1 LENOVO TP-7B 2140 INTL 20050513) ACPI: SSDT 7F6F2E41, 01D8 (r1 LENOVO TP-7B 2140 INTL 20050513) +1142MB HIGHMEM available. +896MB LOWMEM available. + mapped low ram: 0 - 38000000 + low ram: 00000000 - 38000000 + bootmap 00008000 - 0000f000 +(8 early reservations) ==> bootmem [0000000000 - 0038000000] + #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] + #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] + #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] + #3 [0000200000 - 0000c07128] TEXT DATA BSS ==> [0000200000 - 0000c07128] + #4 [0000c08000 - 0000c1d000] INIT_PG_TABLE ==> [0000c08000 - 0000c1d000] + #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] + #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] + #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] +Scan SMP from c0000000 for 1024 bytes. +Scan SMP from c009fc00 for 1024 bytes. +Scan SMP from c00f0000 for 65536 bytes. +found SMP MP-table at [c00f67f0] 000f67f0 +Zone PFN ranges: + DMA 0x00000000 -> 0x00001000 + Normal 0x00001000 -> 0x00038000 + HighMem 0x00038000 -> 0x0007f6d0 +Movable zone start PFN for each node +early_node_map[2] active PFN ranges + 0: 0x00000000 -> 0x0000009f + 0: 0x00000100 -> 0x0007f6d0 +On node 0 totalpages: 521839 +free_area_init_node: node 0, pgdat c0942e80, node_mem_map c1001000 + DMA zone: 3967 pages, LIFO batch:0 + Normal zone: 223520 pages, LIFO batch:31 + HighMem zone: 290274 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) @@ -70,26 +83,27 @@ Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information -Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) +SMP: Allowing 2 CPUs, 0 hotplug CPUs +mapped APIC to ffffb000 (fee00000) +mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 -SMP: Allowing 2 CPUs, 0 hotplug CPUs -PERCPU: Allocating 37800 bytes of per cpu data -NR_CPUS: 2, nr_cpu_ids: 2 -Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517858 +Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) +PERCPU: Allocating 37552 bytes of per cpu data +NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 +Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517761 Kernel command line: root=/dev/sda4 resume=/dev/sda1 psmouse.psmouse_proto=imps psmouse_proto=imps psmouse.proto=imps vga=791 init=/tmp/swsusp-init acpi_sleep=s3_bios,s3_mode no_console_suspend Unknown boot option `psmouse.psmouse_proto=imps': ignoring -mapped APIC to ffffb000 (fee00000) -mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 -Detected 1828.792 MHz processor. +TSC calibrated against PM_TIMER +Detected 1828.748 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar @@ -100,23 +114,23 @@ ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 - memory used by lock dependency info: 992 kB + memory used by lock dependency info: 1056 kB per task-struct memory footprint: 1920 bytes Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) -Memory: 2059068k/2087744k available (5320k kernel code, 27516k reserved, 2458k data, 320k init, 1170240k highmem) +Memory: 2058760k/2087744k available (5438k kernel code, 27692k reserved, 2511k data, 344k init, 1170240k highmem) virtual kernel memory layout: - fixmap : 0xfff7f000 - 0xfffff000 ( 512 kB) + fixmap : 0xfff83000 - 0xfffff000 ( 496 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) - .init : 0xc09a1000 - 0xc09f1000 ( 320 kB) - .data : 0xc0732166 - 0xc0998a08 (2458 kB) - .text : 0xc0200000 - 0xc0732166 (5320 kB) + .init : 0xc09cb000 - 0xc0a21000 ( 344 kB) + .data : 0xc074fbc6 - 0xc09c38f0 (2511 kB) + .text : 0xc0200000 - 0xc074fbc6 (5438 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 32 of 32 pages preallocated hpet clockevent registered -Calibrating delay using timer specific routine.. 3662.04 BogoMIPS (lpj=7324080) +Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.49 BogoMIPS (lpj=7314992) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K @@ -124,7 +138,7 @@ CPU: Processor Core ID: 0 using mwait in idle threads. Checking 'hlt' instruction... OK. -ACPI: Core revision 20080321 +ACPI: Core revision 20080609 Parsing all Control Methods: Table [DSDT](id 0001) - 1592 Objects with 69 Devices 429 Methods 28 Regions Parsing all Control Methods: @@ -137,7 +151,7 @@ Table [SSDT](id 0005) - 14 Objects with 0 Devices 5 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0006) - 14 Objects with 1 Devices 2 Methods 0 Regions - tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired + tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 @@ -145,24 +159,24 @@ lockdep: fixing up alternatives. Booting processor 1/1 ip 6000 Initializing CPU#1 -Calibrating delay using timer specific routine.. 3657.57 BogoMIPS (lpj=7315141) +Calibrating delay using timer specific routine.. 3657.62 BogoMIPS (lpj=7315256) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 checking TSC synchronization [CPU#0 -> CPU#1]: -Measured 579986 cycles TSC warp between CPUs, turning off TSC clock. -Marking TSC unstable due to: check_tsc_sync_source failed. +Measured 579326 cycles TSC warp between CPUs, turning off TSC clock. +Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs -Total of 2 processors activated (7319.61 BogoMIPS). +Total of 2 processors activated (7315.12 BogoMIPS). CPU0 attaching sched-domain: - domain 0: span 0-1 + domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: - domain 0: span 0-1 + domain 0: span 0-1 level CPU groups: 1 0 -net_namespace: 548 bytes +net_namespace: 680 bytes NET: Registered protocol family 16 ACPI: ACPI Dock Station Driver ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay @@ -170,29 +184,58 @@ ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Is dependent on dock ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added +ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access -Setting up standard PCI resources -evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 +evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 ACPI: EC: EC description table is found, configuring boot EC Completing Region/Field/Buffer/Package initialization:........................................................................................................................................................................................................................................................................ Initialized 28/28 Regions 126/126 Fields 54/54 Buffers 56/56 Packages (1651 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:...<6>ACPI: EC: non-query interrupt received, switching to interrupt mode .... Executed 7 _INI methods requiring 2 _STA executions (examined 76 objects) -evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 2 Runtime GPEs in this block +evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 2 Runtime GPEs in this block ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) +pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold +pci 0000:00:1b.0: PME# disabled +pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold +pci 0000:00:1c.0: PME# disabled +pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold +pci 0000:00:1c.1: PME# disabled +pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold +pci 0000:00:1c.2: PME# disabled +pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold +pci 0000:00:1c.3: PME# disabled +pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold +pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO -PCI: Transparent bridge - 0000:00:1e.0 +pci 0000:00:1f.2: PME# supported from D3hot +pci 0000:00:1f.2: PME# disabled +pci 0000:02:00.0: PME# supported from D0 D3hot D3cold +pci 0000:02:00.0: PME# disabled +pci 0000:03:00.0: PME# supported from D0 D3hot D3cold +pci 0000:03:00.0: PME# disabled +pci 0000:15:00.0: supports D1 +pci 0000:15:00.0: supports D2 +pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold +pci 0000:15:00.0: PME# disabled +pci 0000:15:00.1: PME# supported from D0 D3hot D3cold +pci 0000:15:00.1: PME# disabled +pci 0000:15:00.2: supports D1 +pci 0000:15:00.2: supports D2 +pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold +pci 0000:15:00.2: PME# disabled +pci 0000:00:1e.0: transparent bridge +bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] @@ -219,7 +262,7 @@ usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing -Bluetooth: Core ver 2.11 +Bluetooth: Core ver 2.12 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized @@ -230,11 +273,11 @@ system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff could not be reserved system 00:00: iomem range 0xd0000-0xd3fff could not be reserved -system 00:00: iomem range 0xdc000-0xdffff has been reserved -system 00:00: iomem range 0xe0000-0xe3fff has been reserved -system 00:00: iomem range 0xe4000-0xe7fff has been reserved -system 00:00: iomem range 0xe8000-0xebfff has been reserved -system 00:00: iomem range 0xec000-0xeffff has been reserved +system 00:00: iomem range 0xdc000-0xdffff could not be reserved +system 00:00: iomem range 0xe0000-0xe3fff could not be reserved +system 00:00: iomem range 0xe4000-0xe7fff could not be reserved +system 00:00: iomem range 0xe8000-0xebfff could not be reserved +system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7fffffff could not be reserved system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved @@ -250,38 +293,43 @@ system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved -PCI: Bridge: 0000:00:1c.0 - IO window: 2000-2fff - MEM window: 0xee000000-0xee0fffff - PREFETCH window: disabled. -PCI: Bridge: 0000:00:1c.1 - IO window: 3000-4fff - MEM window: 0xec000000-0xedffffff - PREFETCH window: 0x00000000e4000000-0x00000000e40fffff -PCI: Bridge: 0000:00:1c.2 - IO window: 5000-6fff - MEM window: 0xe8000000-0xe9ffffff - PREFETCH window: 0x00000000e4100000-0x00000000e41fffff -PCI: Bridge: 0000:00:1c.3 - IO window: 7000-8fff - MEM window: 0xea000000-0xebffffff - PREFETCH window: 0x00000000e4200000-0x00000000e42fffff -PCI: Bus 22, cardbus bridge: 0000:15:00.0 - IO window: 0x00009000-0x000090ff - IO window: 0x00009400-0x000094ff - PREFETCH window: 0xe0000000-0xe3ffffff - MEM window: 0x88000000-0x8bffffff -PCI: Bridge: 0000:00:1e.0 - IO window: 9000-cfff - MEM window: 0xe4300000-0xe7ffffff - PREFETCH window: 0x00000000e0000000-0x00000000e3ffffff -PCI: Setting latency timer of device 0000:00:1c.0 to 64 -PCI: Setting latency timer of device 0000:00:1c.1 to 64 -PCI: Setting latency timer of device 0000:00:1c.2 to 64 -PCI: Setting latency timer of device 0000:00:1c.3 to 64 +pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 +pci 0000:00:1c.0: IO window: 0x2000-0x2fff +pci 0000:00:1c.0: MEM window: 0xee000000-0xee0fffff +pci 0000:00:1c.0: PREFETCH window: disabled +pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 +pci 0000:00:1c.1: IO window: 0x3000-0x4fff +pci 0000:00:1c.1: MEM window: 0xec000000-0xedffffff +pci 0000:00:1c.1: PREFETCH window: 0x000000e4000000-0x000000e40fffff +pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 +pci 0000:00:1c.2: IO window: 0x5000-0x6fff +pci 0000:00:1c.2: MEM window: 0xe8000000-0xe9ffffff +pci 0000:00:1c.2: PREFETCH window: 0x000000e4100000-0x000000e41fffff +pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c +pci 0000:00:1c.3: IO window: 0x7000-0x8fff +pci 0000:00:1c.3: MEM window: 0xea000000-0xebffffff +pci 0000:00:1c.3: PREFETCH window: 0x000000e4200000-0x000000e42fffff +pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 +pci 0000:15:00.0: IO window: 0x009000-0x0090ff +pci 0000:15:00.0: IO window: 0x009400-0x0094ff +pci 0000:15:00.0: PREFETCH window: 0xe0000000-0xe3ffffff +pci 0000:15:00.0: MEM window: 0x88000000-0x8bffffff +pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 +pci 0000:00:1e.0: IO window: 0x9000-0xcfff +pci 0000:00:1e.0: MEM window: 0xe4300000-0xe7ffffff +pci 0000:00:1e.0: PREFETCH window: 0x000000e0000000-0x000000e3ffffff +pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 +pci 0000:00:1c.0: setting latency timer to 64 +pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 +pci 0000:00:1c.1: setting latency timer to 64 +pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 +pci 0000:00:1c.2: setting latency timer to 64 +pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 +pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: enabling device (0005 -> 0007) -PCI: Setting latency timer of device 0000:00:1e.0 to 64 -PCI: Setting latency timer of device 0000:15:00.0 to 64 +pci 0000:00:1e.0: setting latency timer to 64 +pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 +pci 0000:15:00.0: setting latency timer to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) @@ -310,7 +358,7 @@ vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 102x42 fb0: VESA VGA frame buffer device -ACPI: AC Adapter [AC] (on-line) +ACPI: AC Adapter [AC] (off-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] @@ -325,21 +373,21 @@ Parsing all Control Methods: Table [SSDT](id 0026) - 13 Objects with 0 Devices 1 Methods 0 Regions ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) -ACPI: ACPI0007:00 is registered as cooling_device0 +processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7F6F1C5E, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) Parsing all Control Methods: -Table [SSDT](id 0030) - 4 Objects with 0 Devices 4 Methods 0 Regions +Table [SSDT](id 002E) - 4 Objects with 0 Devices 4 Methods 0 Regions ACPI: SSDT 7F6F1F66, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) Parsing all Control Methods: -Table [SSDT](id 0031) - 1 Objects with 0 Devices 1 Methods 0 Regions +Table [SSDT](id 002F) - 1 Objects with 0 Devices 1 Methods 0 Regions ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) -ACPI: ACPI0007:01 is registered as cooling_device1 +processor ACPI0007:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) -ACPI: LNXTHERM:01 is registered as thermal_zone0 -ACPI: Thermal Zone [THM0] (58 C) -ACPI: LNXTHERM:02 is registered as thermal_zone1 -ACPI: Thermal Zone [THM1] (60 C) +thermal LNXTHERM:01: registered as thermal_zone0 +ACPI: Thermal Zone [THM0] (50 C) +thermal LNXTHERM:02: registered as thermal_zone1 +ACPI: Thermal Zone [THM1] (49 C) lp: driver loaded but no devices found Non-volatile memory driver v1.2 intel_rng: FWH not detected @@ -349,16 +397,18 @@ agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 -PCI: Setting latency timer of device 0000:00:02.0 to 64 +pci 0000:00:02.0: power state changed by ACPI to D0 +pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 +pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets intelfb: Version 0.9.5 intelfb: Cannot reserve FB region. -Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled +Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A floppy0: no floppy controllers found loop: module loaded -thinkpad_acpi: ThinkPad ACPI Extras v0.20 +thinkpad_acpi: ThinkPad ACPI Extras v0.21 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7BETD3WW (2.14 ), EC 7BHT40WW-1.13 thinkpad_acpi: Lenovo ThinkPad X60, model 17097HU @@ -380,7 +430,8 @@ e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:02:00.0: Disabling L1 ASPM -PCI: Setting latency timer of device 0000:02:00.0 to 64 +e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 +e1000e 0000:02:00.0: setting latency timer to 64 eth0: (PCI Express:2.5GB/s:Width x1) 00:16:d3:25:19:04 eth0: Intel(R) PRO/1000 Network Connection eth0: MAC: 2, PHY: 2, PBA No: 005302-003 @@ -408,17 +459,18 @@ usbcore: registered new interface driver w35und iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds iwl3945: Copyright(c) 2003-2008 Intel Corporation -PCI: Setting latency timer of device 0000:03:00.0 to 64 +iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 +iwl3945 0000:03:00.0: setting latency timer to 64 iwl3945: Detected Intel Wireless WiFi Link 3945ABG iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels phy0: Selected rate control algorithm 'iwl-3945-rs' -ACPI: PCI interrupt for device 0000:03:00.0 disabled +iwl3945 0000:03:00.0: PCI INT A disabled Linux video capture interface: v2.00 Uniform Multi-Platform E-IDE driver -ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx -ICH7: IDE controller (0x8086:0x27df rev 0x02) at PCI slot 0000:00:1f.1 -ICH7: not 100% native mode: will probe irqs later -ICH7: IDE port disabled +piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02) +pci 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 +piix 0000:00:1f.1: IDE port disabled +piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817 Probing IDE interface ide0... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 @@ -426,9 +478,10 @@ ide_generic: I/O resource 0x1F0-0x1F7 not free. ide_generic: I/O resource 0x170-0x177 not free. ahci 0000:00:1f.2: version 3.0 +ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part -PCI: Setting latency timer of device 0000:00:1f.2 to 64 +ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci ahci: autosuspend disabled scsi1 : ahci @@ -437,7 +490,7 @@ ahci: autosuspend disabled scsi3 : ahci ahci: autosuspend disabled -ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 16 +ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY @@ -471,11 +524,13 @@ pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff -PCI: Setting latency timer of device 0000:00:1d.7 to 64 +ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 +ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 +ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 -PCI: cache line size of 32 is not supported by device 0000:00:1d.7 +ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice @@ -484,11 +539,13 @@ usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller -usb usb1: Manufacturer: Linux 2.6.26 ehci_hcd +usb usb1: Manufacturer: Linux 2.6.27-rc2 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 -PCI: Setting latency timer of device 0000:00:1d.0 to 64 +uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 +uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 +uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 @@ -498,9 +555,10 @@ usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller -usb usb2: Manufacturer: Linux 2.6.26 uhci_hcd +usb usb2: Manufacturer: Linux 2.6.27-rc2 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 -PCI: Setting latency timer of device 0000:00:1d.1 to 64 +uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 +uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840 @@ -510,9 +568,11 @@ usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller -usb usb3: Manufacturer: Linux 2.6.26 uhci_hcd +usb usb3: Manufacturer: Linux 2.6.27-rc2 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 -PCI: Setting latency timer of device 0000:00:1d.2 to 64 +uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 +uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 +uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 @@ -522,9 +582,10 @@ usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller -usb usb4: Manufacturer: Linux 2.6.26 uhci_hcd +usb usb4: Manufacturer: Linux 2.6.27-rc2 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 -PCI: Setting latency timer of device 0000:00:1d.3 to 64 +uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 +uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 @@ -534,7 +595,7 @@ usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller -usb usb5: Manufacturer: Linux 2.6.26 uhci_hcd +usb usb5: Manufacturer: Linux 2.6.27-rc2 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice @@ -562,31 +623,34 @@ input: PC Speaker as /class/input/input5 input: PS/2 Generic Mouse as /class/input/input6 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 -rtc0: alarms up to one month, y3k +rtc0: alarms up to one month, y3k, hpet irqs md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 -device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com +device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized Bluetooth: Generic Bluetooth USB driver ver 0.1 usbcore: registered new interface driver btusb -EDAC MC: Ver: 2.1.0 Jul 14 2008 +EDAC MC: Ver: 2.1.0 Aug 6 2008 cpuidle: using governor ladder sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman -sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 18) -mmc0: Will use DMA mode even though HW doesn't fully claim to support it. -PCI: Setting latency timer of device 0000:15:00.2 to 64 +sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 18) +sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Registered led device: mmc0 -mmc0: SDHCI at 0xe4301800 irq 18 DMA +mmc0: SDHCI controller on PCI [0000:15:00.2] using PIO ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver -Advanced Linux Sound Architecture Driver Version 1.0.16. +Advanced Linux Sound Architecture Driver Version 1.0.17. +HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:2010 -PCI: Setting latency timer of device 0000:00:1b.0 to 64 +HDA Intel 0000:00:1b.0: setting latency timer to 64 +mmc0: new MMC card at address 0001 +mmcblk0: mmc0:0001 MMC 1019392KiB + mmcblk0: p1 usbcore: registered new interface driver snd-usb-audio ALSA device list: #0: HDA Intel at 0xee240000 irq 17 @@ -594,26 +658,23 @@ ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 -Bluetooth: L2CAP ver 2.9 +Bluetooth: L2CAP ver 2.10 Bluetooth: L2CAP socket layer initialized -Bluetooth: SCO (Voice Link) ver 0.5 +Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized -Bluetooth: RFCOMM ver 1.8 +Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 -mmc0: new MMC card at address 0001 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' -mmcblk0: mmc0:0001 MMC 1019392KiB - mmcblk0:<6>Installing 9P2000 support - p1 +Installing 9P2000 support Using IPI No-Shortcut mode PM: Resume from partition /dev/sda1 PM: Checking hibernation image. @@ -625,9 +686,9 @@ kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. -debug: unmapping init memory c09a1000..c09f1000 -Write protecting the kernel text: 5324k -Write protecting the kernel read-only data: 1916k +debug: unmapping init memory c09cb000..c0a21000 +Write protecting the kernel text: 5440k +Write protecting the kernel read-only data: 1968k Failed to execute /tmp/swsusp-init. Attempting defaults... EXT3 FS on sda4, internal journal Adding 987988k swap on /dev/sda1. Priority:-1 extents:1 across:987988k @@ -637,10 +698,259 @@ pcmcia: Detected deprecated PCMCIA ioctl usage from process: hwclock. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. -Clocksource tsc unstable (delta = -82296647 ns) -eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX coda_read_super: Bad mount data coda_read_super: device index: 0 coda_read_super: rootfid is (01234567.ffffffff.08051a38.00000000) coda: Unexpected interruption. Failure of coda_cnode_make for root: error -4 -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/