Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759621AbYHOVU4 (ORCPT ); Fri, 15 Aug 2008 17:20:56 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753654AbYHOVUq (ORCPT ); Fri, 15 Aug 2008 17:20:46 -0400 Received: from mx3.mail.elte.hu ([157.181.1.138]:52369 "EHLO mx3.mail.elte.hu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753201AbYHOVUj (ORCPT ); Fri, 15 Aug 2008 17:20:39 -0400 Date: Fri, 15 Aug 2008 23:20:10 +0200 From: Ingo Molnar To: Prarit Bhargava Cc: FUJITA Tomonori , jbarnes@virtuousgeek.org, joro@8bytes.org, linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org Subject: Re: [PATCH]: PCI: GART iommu alignment fixes [v2] Message-ID: <20080815212010.GA9187@elte.hu> References: <4899B611.4070408@redhat.com> <200808071003.47326.jbarnes@virtuousgeek.org> <489B33D4.1080107@redhat.com> <20080809125116H.fujita.tomonori@lab.ntt.co.jp> <20080815161629.GL27955@elte.hu> <20080815180048.GA26844@elte.hu> <48A5E986.2040201@redhat.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <48A5E986.2040201@redhat.com> User-Agent: Mutt/1.5.18 (2008-05-17) X-ELTE-VirusStatus: clean X-ELTE-SpamScore: -1.5 X-ELTE-SpamLevel: X-ELTE-SpamCheck: no X-ELTE-SpamVersion: ELTE 2.0 X-ELTE-SpamCheck-Details: score=-1.5 required=5.9 tests=BAYES_00 autolearn=no SpamAssassin version=3.2.3 -1.5 BAYES_00 BODY: Bayesian spam probability is 0 to 1% [score: 0.0000] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 104608 Lines: 2431 * Prarit Bhargava wrote: >> on an AMD X2 testsystem. (Asus board) Can send more info on request. >> Config is: >> >> http://redhat.com/~mingo/misc/config-Fri_Aug_15_18_30_56_CEST_2008.bad >> >> Any idea why that is so? Apparently the alignment change wasnt as >> benign as assumed. > > Ingo, can you please send me details on the system? I'll try to track > it down. below is a bootlog and lspci output. There's nothing special about it - run of the mill whitebox PC, ASUS A8N-E, Athlon64 X2 3800+, 1GB RAM. Ingo ---------------> Initializing cgroup subsys cpuset Linux version 2.6.27-rc3-tip (mingo@dione) (gcc version 4.2.3) #24581 SMP Fri Aug 15 23:11:30 CEST 2008 Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200,keep debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 highres=0 nmi_watchdog=0 nolapic_timer idle=mwait idle=poll highmem=512m nopat notsc pci=nomsi KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) console [earlyser0] enabled debug: ignoring loglevel setting. using polling idle threads. PAT support disabled. last_pfn = 0x3fff0 max_arch_pfn = 0x3ffffffff init_memory_mapping 0000000000 - 003fe00000 page 2M 003fe00000 - 003fff0000 page 4k kernel direct mapping tables up to 3fff0000 @ 8000-b000 last_map_addr: 3fff0000 end: 3fff0000 DMI 2.3 present. (5 early reservations) ==> bootmem [0000000000 - 003fff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000107959c] TEXT DATA BSS ==> [0000200000 - 000107959c] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #4 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] Scan SMP from ffff880000000000 for 1024 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. Scan SMP from ffff8800000f0000 for 65536 bytes. found SMP MP-table at [ffff8800000f5680] 000f5680 [ffffe20000000000-ffffe20000ffffff] PMD -> [ffff880001200000-ffff8800021fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003fff0 On node 0 totalpages: 262031 DMA zone: 3833 pages, LIFO batch:0 DMA32 zone: 254000 pages, LIFO batch:31 Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) Processor #1 Bus #0 is PCI Bus #1 is PCI Bus #2 is PCI Bus #3 is PCI Bus #4 is PCI Bus #5 is PCI Bus #6 is ISA I/O APIC #2 Version 17 at 0xFEC00000. Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03 Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05 Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08 Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00 Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01 Processors: 2 SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffffffff5fc000 ( fee00000) mapped IOAPIC to ffffffffff5fb000 (00000000fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) dyn_array irq_2_pin_head+0x0/0x8 size:0x10 nr:256 align:0x1000 dyn_array irq_cfgx+0x0/0x8 size:0x420 nr:32 align:0x1000 dyn_array irq_descX+0x0/0x8 size:0x500 nr:32 align:0x1000 dyn_array total_size: 0x14000 dyn_array irq_2_pin_head+0x0/0x8 ==> [0x1084000 - 0x1085000] dyn_array irq_cfgx+0x0/0x8 ==> [0x1085000 - 0x108d400] dyn_array irq_descX+0x0/0x8 ==> [0x108e000 - 0x1098000] kstat_irqs ==> [0x1098000 - 0x1098100] PERCPU: Allocating 69632 bytes of per cpu data NR_CPUS: 4096, nr_cpu_ids: 2, nr_node_ids 512 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257833 Kernel command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200,keep debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 highres=0 nmi_watchdog=0 nolapic_timer idle=mwait idle=poll highmem=512m nopat notsc pci=nomsi debug: sysrq always enabled. notsc: Kernel compiled with CONFIG_X86_TSC, cannot disable TSC completely. Initializing CPU#0 found new irq_desc for irq 0 found new irq_desc for irq 1 found new irq_desc for irq 2 found new irq_desc for irq 3 found new irq_desc for irq 4 found new irq_desc for irq 5 found new irq_desc for irq 6 found new irq_desc for irq 7 found new irq_desc for irq 8 found new irq_desc for irq 9 found new irq_desc for irq 10 found new irq_desc for irq 11 found new irq_desc for irq 12 found new irq_desc for irq 13 found new irq_desc for irq 14 found new irq_desc for irq 15 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PIT Detected 2010.337 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 1014380k/1048512k available (5275k kernel code, 33136k reserved, 5387k data, 1128k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=512 Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.67 BogoMIPS (lpj=8041348) Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 22239 hash entries in 175 pages Setting APIC routing to flat enabled ExtINT on CPU#0 ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0 not connected. 0 add_pin_to_irq: irq 1 --> apic 0 pin 1 IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) 0 add_pin_to_irq: irq 0 --> apic 0 pin 2 IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) 0 add_pin_to_irq: irq 3 --> apic 0 pin 3 IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1) 0 add_pin_to_irq: irq 4 --> apic 0 pin 4 IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) 0 add_pin_to_irq: irq 5 --> apic 0 pin 5 IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1) 0 add_pin_to_irq: irq 6 --> apic 0 pin 6 IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) 0 add_pin_to_irq: irq 7 --> apic 0 pin 7 IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) 0 add_pin_to_irq: irq 8 --> apic 0 pin 8 IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) 0 add_pin_to_irq: irq 9 --> apic 0 pin 9 IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0) 0 add_pin_to_irq: irq 10 --> apic 0 pin 10 IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) 0 add_pin_to_irq: irq 11 --> apic 0 pin 11 IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1) 0 add_pin_to_irq: irq 12 --> apic 0 pin 12 IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) 0 add_pin_to_irq: irq 13 --> apic 0 pin 13 IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) 0 add_pin_to_irq: irq 14 --> apic 0 pin 14 IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) 0 add_pin_to_irq: irq 15 --> apic 0 pin 15 IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found apic 0 pin 0) ... ....... works. CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Disabling APIC timer calling migration_init+0x0/0x4f initcall migration_init+0x0/0x4f returned 1 after 0 msecs initcall migration_init+0x0/0x4f returned with error code 1 calling spawn_ksoftirqd+0x0/0x4d initcall spawn_ksoftirqd+0x0/0x4d returned 0 after 0 msecs calling init_call_single_data+0x0/0x5a initcall init_call_single_data+0x0/0x5a returned 0 after 0 msecs calling relay_init+0x0/0x14 initcall relay_init+0x0/0x14 returned 0 after 0 msecs Booting processor 1/1 ip 6000 Initializing CPU#1 masked ExtINT on CPU#1 Calibrating delay loop... 2007.04 BogoMIPS (lpj=4014080) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Brought up 2 CPUs Total of 2 processors activated (6027.71 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 PM: Adding info for No Bus:platform calling init_cpufreq_transition_notifier_list+0x0/0x1b initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 msecs calling net_ns_init+0x0/0x13e net_namespace: 1392 bytes initcall net_ns_init+0x0/0x13e returned 0 after 3 msecs calling cpufreq_tsc+0x0/0x16 initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs calling init_smp_flush+0x0/0x53 initcall init_smp_flush+0x0/0x53 returned 0 after 0 msecs calling print_banner+0x0/0xe Booting paravirtualized kernel on bare hardware initcall print_banner+0x0/0xe returned 0 after 3 msecs calling ksysfs_init+0x0/0xbb initcall ksysfs_init+0x0/0xbb returned 0 after 0 msecs calling init_jiffies_clocksource+0x0/0x12 initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 msecs calling pm_init+0x0/0x34 initcall pm_init+0x0/0x34 returned 0 after 0 msecs calling pm_disk_init+0x0/0x19 initcall pm_disk_init+0x0/0x19 returned 0 after 0 msecs calling swsusp_header_init+0x0/0x31 initcall swsusp_header_init+0x0/0x31 returned 0 after 0 msecs calling filelock_init+0x0/0x2e initcall filelock_init+0x0/0x2e returned 0 after 0 msecs calling init_script_binfmt+0x0/0x12 initcall init_script_binfmt+0x0/0x12 returned 0 after 0 msecs calling init_elf_binfmt+0x0/0x12 initcall init_elf_binfmt+0x0/0x12 returned 0 after 0 msecs calling init_compat_elf_binfmt+0x0/0x12 initcall init_compat_elf_binfmt+0x0/0x12 returned 0 after 0 msecs calling debugfs_init+0x0/0x51 initcall debugfs_init+0x0/0x51 returned 0 after 0 msecs calling securityfs_init+0x0/0x51 initcall securityfs_init+0x0/0x51 returned 0 after 0 msecs calling random32_init+0x0/0xca initcall random32_init+0x0/0xca returned 0 after 0 msecs calling early_resume_init+0x0/0x1a6 Time: 21:11:41 Date: 08/15/08 initcall early_resume_init+0x0/0x1a6 returned 0 after 0 msecs calling cpufreq_core_init+0x0/0x89 initcall cpufreq_core_init+0x0/0x89 returned 0 after 0 msecs calling cpuidle_init+0x0/0x40 initcall cpuidle_init+0x0/0x40 returned 0 after 0 msecs calling virtio_init+0x0/0x2b initcall virtio_init+0x0/0x2b returned 0 after 0 msecs calling sock_init+0x0/0x5e initcall sock_init+0x0/0x5e returned 0 after 0 msecs calling netpoll_init+0x0/0x31 initcall netpoll_init+0x0/0x31 returned 0 after 0 msecs calling netlink_proto_init+0x0/0x14d NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x14d returned 0 after 3 msecs calling bdi_class_init+0x0/0x41 initcall bdi_class_init+0x0/0x41 returned 0 after 0 msecs calling kobject_uevent_init+0x0/0x45 initcall kobject_uevent_init+0x0/0x45 returned 0 after 0 msecs calling pcibus_class_init+0x0/0x19 initcall pcibus_class_init+0x0/0x19 returned 0 after 0 msecs calling pci_driver_init+0x0/0x12 initcall pci_driver_init+0x0/0x12 returned 0 after 0 msecs calling lcd_class_init+0x0/0x4d initcall lcd_class_init+0x0/0x4d returned 0 after 0 msecs calling tty_class_init+0x0/0x31 initcall tty_class_init+0x0/0x31 returned 0 after 0 msecs calling vtconsole_class_init+0x0/0xc3 PM: Adding info for No Bus:vtcon0 initcall vtconsole_class_init+0x0/0xc3 returned 0 after 3 msecs calling enable_pci_io_ecs+0x0/0x2e initcall enable_pci_io_ecs+0x0/0x2e returned 0 after 0 msecs calling early_fill_mp_bus_info+0x0/0x7c2 node 0 link 0: io port [1000, fffff] TOM: 0000000040000000 aka 1024M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [feb00000, fec0ffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [40000000, fed3ffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [40000000, fcffffffff] bus: 00 index 2 mmio: [feb00000, fec0ffff] bus: 00 index 3 mmio: [a0000, bffff] initcall early_fill_mp_bus_info+0x0/0x7c2 returned 0 after 34 msecs calling arch_kdebugfs_init+0x0/0x24 initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 msecs calling mtrr_if_init+0x0/0x77 initcall mtrr_if_init+0x0/0x77 returned 0 after 0 msecs calling dmi_id_init+0x0/0x2f0 PM: Adding info for No Bus:id initcall dmi_id_init+0x0/0x2f0 returned 0 after 0 msecs calling pci_arch_init+0x0/0x40 PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x40 returned 0 after 3 msecs calling topology_init+0x0/0x33 initcall topology_init+0x0/0x33 returned 0 after 0 msecs calling mtrr_init_finialize+0x0/0x3d initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 msecs calling param_sysfs_init+0x0/0x1d6 initcall param_sysfs_init+0x0/0x1d6 returned 0 after 15 msecs calling pm_sysrq_init+0x0/0x1e initcall pm_sysrq_init+0x0/0x1e returned 0 after 3 msecs calling readahead_init+0x0/0x38 PM: Adding info for No Bus:default initcall readahead_init+0x0/0x38 returned 0 after 0 msecs calling init_bio+0x0/0xc5 initcall init_bio+0x0/0xc5 returned 0 after 0 msecs calling blk_settings_init+0x0/0x2a initcall blk_settings_init+0x0/0x2a returned 0 after 0 msecs calling blk_ioc_init+0x0/0x2a initcall blk_ioc_init+0x0/0x2a returned 0 after 0 msecs calling genhd_device_init+0x0/0x55 initcall genhd_device_init+0x0/0x55 returned 0 after 0 msecs calling gpiolib_debugfs_init+0x0/0x24 initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 msecs calling pci_slot_init+0x0/0x4a initcall pci_slot_init+0x0/0x4a returned 0 after 0 msecs calling misc_init+0x0/0x9f initcall misc_init+0x0/0x9f returned 0 after 0 msecs calling tifm_init+0x0/0x7e initcall tifm_init+0x0/0x7e returned 0 after 0 msecs calling phy_init+0x0/0x31 initcall phy_init+0x0/0x31 returned 0 after 0 msecs calling init_scsi+0x0/0x81 SCSI subsystem initialized initcall init_scsi+0x0/0x81 returned 0 after 3 msecs calling ata_init+0x0/0x336 libata version 3.00 loaded. initcall ata_init+0x0/0x336 returned 0 after 3 msecs calling spi_init+0x0/0x83 initcall spi_init+0x0/0x83 returned 0 after 0 msecs calling usb_init+0x0/0x10f usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x10f returned 0 after 11 msecs calling serio_init+0x0/0x99 initcall serio_init+0x0/0x99 returned 0 after 0 msecs calling gameport_init+0x0/0x98 initcall gameport_init+0x0/0x98 returned 0 after 0 msecs calling input_init+0x0/0x10e initcall input_init+0x0/0x10e returned 0 after 0 msecs calling i2c_init+0x0/0x66 i2c-core: driver [dummy] registered initcall i2c_init+0x0/0x66 returned 0 after 3 msecs calling leds_init+0x0/0x31 initcall leds_init+0x0/0x31 returned 0 after 0 msecs calling pci_subsys_init+0x0/0x116 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PM: Adding info for No Bus:pci0000:00 PM: Adding info for No Bus:0000:00 HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: supports D1 pci 0000:00:02.0: supports D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: supports D1 pci 0000:00:02.1: supports D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:04.0: supports D1 pci 0000:00:04.0: supports D2 pci 0000:00:0a.0: supports D1 pci 0000:00:0a.0: supports D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled pci 0000:05:07.0: supports D1 pci 0000:05:07.0: supports D2 pci 0000:05:07.0: PME# supported from D1 D2 D3hot pci 0000:05:07.0: PME# disabled pci 0000:00:09.0: transparent bridge PCI: bridge 0000:00:09.0 io port: [c000, cfff] PCI: bridge 0000:00:09.0 32bit mmio: [da000000, da0fffff] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: supports D2 pci 0000:01:00.1: supports D1 pci 0000:01:00.1: supports D2 Pre-1.1 PCIe device detected, disable ASPM for 0000:00:0e.0. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:0e.0 io port: [b000, bfff] PCI: bridge 0000:00:0e.0 32bit mmio: [d8000000, d9ffffff] PCI: bridge 0000:00:0e.0 64bit mmio pref: [d0000000, d7ffffff] PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:01.0 PM: Adding info for pci:0000:00:01.1 PM: Adding info for pci:0000:00:02.0 PM: Adding info for pci:0000:00:02.1 PM: Adding info for pci:0000:00:04.0 PM: Adding info for pci:0000:00:06.0 PM: Adding info for pci:0000:00:09.0 PM: Adding info for pci:0000:00:0a.0 PM: Adding info for pci:0000:00:0b.0 PM: Adding info for pci:0000:00:0c.0 PM: Adding info for pci:0000:00:0d.0 PM: Adding info for pci:0000:00:0e.0 PM: Adding info for pci:0000:00:18.0 PM: Adding info for pci:0000:00:18.1 PM: Adding info for pci:0000:00:18.2 PM: Adding info for pci:0000:00:18.3 PM: Adding info for pci:0000:05:07.0 PM: Adding info for No Bus:0000:05 PM: Adding info for No Bus:0000:04 PM: Adding info for No Bus:0000:03 PM: Adding info for No Bus:0000:02 PM: Adding info for pci:0000:01:00.0 PM: Adding info for pci:0000:01:00.1 PM: Adding info for No Bus:0000:01 pci 0000:00:00.0: default IRQ router [10de/005e] pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 3 pci 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11 pci 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 11 pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 5 initcall pci_subsys_init+0x0/0x116 returned 0 after 221 msecs calling proto_init+0x0/0x2e initcall proto_init+0x0/0x2e returned 0 after 0 msecs calling net_dev_init+0x0/0x148 initcall net_dev_init+0x0/0x148 returned 0 after 0 msecs calling neigh_init+0x0/0x71 initcall neigh_init+0x0/0x71 returned 0 after 0 msecs calling fib_rules_init+0x0/0xa6 initcall fib_rules_init+0x0/0xa6 returned 0 after 0 msecs calling pktsched_init+0x0/0xc4 initcall pktsched_init+0x0/0xc4 returned 0 after 0 msecs calling tc_filter_init+0x0/0x4c initcall tc_filter_init+0x0/0x4c returned 0 after 0 msecs calling tc_action_init+0x0/0x4c initcall tc_action_init+0x0/0x4c returned 0 after 0 msecs calling genl_init+0x0/0xd8 initcall genl_init+0x0/0xd8 returned 0 after 15 msecs calling cipso_v4_init+0x0/0x64 initcall cipso_v4_init+0x0/0x64 returned 0 after 0 msecs calling wanrouter_init+0x0/0x55 Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. initcall wanrouter_init+0x0/0x55 returned 0 after 3 msecs calling wireless_nlevent_init+0x0/0x31 initcall wireless_nlevent_init+0x0/0x31 returned 0 after 0 msecs calling netlbl_init+0x0/0x83 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x83 returned 0 after 11 msecs calling pci_iommu_init+0x0/0xd initcall pci_iommu_init+0x0/0xd returned 0 after 0 msecs calling print_all_ICs+0x0/0x441 printing PIC contents ... PIC IMR: fffa ... PIC IRR: 0001 ... PIC ISR: 0001 ... PIC ELCR: 0828 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 00040010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 000000e0 (e0) ... APIC PROCPRI: 00000000 ... APIC EOI: 00000000 ... APIC RRR: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC TMR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC IRR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000010000000000000000 ... APIC ESR: 00000000 ... APIC ICR: 000008ef ... APIC ICR2: 02000000 ... APIC LVTT: 00010000 ... APIC LVTPC: 00010000 ... APIC LVT0: 00010700 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 00000000 ... APIC TMCCT: 00000000 ... APIC TDCR: 00000000 printing local APIC contents on CPU#1/1: ... APIC ID: 01000000 (1) ... APIC VERSION: 00040010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 00000030 (30) ... APIC PROCPRI: 00000000 ... APIC EOI: 00000000 ... APIC RRR: 00000000 ... APIC LDR: 02000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC TMR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC IRR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000001000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC ESR: 00000000 ... APIC ICR: 000008ef ... APIC ICR2: 01000000 ... APIC LVTT: 00010000 ... APIC LVTPC: 00010000 ... APIC LVT0: 00010700 ... APIC LVT1: 00010400 ... APIC LVTERR: 000000fe ... APIC TMICT: 00000000 ... APIC TMCCT: 00000000 ... APIC TDCR: 00000000 number of MP IRQ sources: 17. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 00000000 ....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 003 0 0 0 0 0 1 1 30 01 003 0 0 0 0 0 1 1 31 02 000 1 0 0 0 0 0 0 00 03 003 1 1 0 1 0 1 1 33 04 003 0 0 0 0 0 1 1 34 05 003 1 1 0 1 0 1 1 35 06 003 0 0 0 0 0 1 1 36 07 003 1 0 0 0 0 1 1 37 08 003 0 0 0 0 0 1 1 38 09 003 0 0 0 0 0 1 1 39 0a 003 0 0 0 0 0 1 1 3A 0b 003 1 1 0 1 0 1 1 3B 0c 003 0 0 0 0 0 1 1 3C 0d 003 0 0 0 0 0 1 1 3D 0e 003 0 0 0 0 0 1 1 3E 0f 003 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. initcall print_all_ICs+0x0/0x441 returned 0 after 175 msecs calling hpet_late_init+0x0/0x4d initcall hpet_late_init+0x0/0x4d returned -19 after 0 msecs calling clocksource_done_booting+0x0/0x12 initcall clocksource_done_booting+0x0/0x12 returned 0 after 0 msecs calling ftrace_init_debugfs+0x0/0xfd initcall ftrace_init_debugfs+0x0/0xfd returned 0 after 0 msecs calling tracer_alloc_buffers+0x0/0x608 tracer: 357 pages allocated for 16384 entries of 88 bytes actual entries 16422 initcall tracer_alloc_buffers+0x0/0x608 returned 0 after 7 msecs calling init_pipe_fs+0x0/0x4c initcall init_pipe_fs+0x0/0x4c returned 0 after 0 msecs calling init_mnt_writers+0x0/0x55 initcall init_mnt_writers+0x0/0x55 returned 0 after 0 msecs calling anon_inode_init+0x0/0x115 initcall anon_inode_init+0x0/0x115 returned 0 after 0 msecs calling pcie_aspm_init+0x0/0x8 initcall pcie_aspm_init+0x0/0x8 returned 0 after 0 msecs calling chr_dev_init+0x0/0xb4 PM: Adding info for No Bus:mem PM: Adding info for No Bus:null PM: Adding info for No Bus:port PM: Adding info for No Bus:zero PM: Adding info for No Bus:full PM: Adding info for No Bus:random PM: Adding info for No Bus:urandom PM: Adding info for No Bus:kmsg PM: Adding info for No Bus:oldmem initcall chr_dev_init+0x0/0xb4 returned 0 after 26 msecs calling firmware_class_init+0x0/0x79 initcall firmware_class_init+0x0/0x79 returned 0 after 0 msecs calling loopback_init+0x0/0x12 PM: Adding info for No Bus:lo initcall loopback_init+0x0/0x12 returned 0 after 0 msecs calling cpufreq_gov_performance_init+0x0/0x12 initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 msecs calling ssb_modinit+0x0/0x4a initcall ssb_modinit+0x0/0x4a returned 0 after 0 msecs calling pcibios_assign_resources+0x0/0x88 pci 0000:00:09.0: PCI bridge, secondary bus 0000:05 pci 0000:00:09.0: IO window: 0xc000-0xcfff pci 0000:00:09.0: MEM window: 0xda000000-0xda0fffff pci 0000:00:09.0: PREFETCH window: disabled pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: disabled pci 0000:00:0b.0: PREFETCH window: disabled pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0c.0: IO window: disabled pci 0000:00:0c.0: MEM window: disabled pci 0000:00:0c.0: PREFETCH window: disabled pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0d.0: IO window: disabled pci 0000:00:0d.0: MEM window: disabled pci 0000:00:0d.0: PREFETCH window: disabled pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:0e.0: IO window: 0xb000-0xbfff pci 0000:00:0e.0: MEM window: 0xd8000000-0xd9ffffff pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 05 index 0 io port: [c000, cfff] bus: 05 index 1 mmio: [da000000, da0fffff] bus: 05 index 2 mmio: [0, 0] bus: 05 index 3 io port: [0, ffff] bus: 05 index 4 mmio: [0, ffffffffffffffff] bus: 04 index 0 mmio: [0, 0] bus: 04 index 1 mmio: [0, 0] bus: 04 index 2 mmio: [0, 0] bus: 04 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [0, 0] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [0, 0] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 01 index 0 io port: [b000, bfff] bus: 01 index 1 mmio: [d8000000, d9ffffff] bus: 01 index 2 mmio: [d0000000, d7ffffff] bus: 01 index 3 mmio: [0, 0] initcall pcibios_assign_resources+0x0/0x88 returned 0 after 148 msecs calling inet_init+0x0/0x1fb NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered initcall inet_init+0x0/0x1fb returned 0 after 72 msecs calling af_unix_init+0x0/0x55 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x55 returned 0 after 3 msecs calling populate_rootfs+0x0/0x201 initcall populate_rootfs+0x0/0x201 returned 0 after 0 msecs calling pci_init+0x0/0x3a pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Enabling HT MSI Mapping pci 0000:00:0d.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping pci 0000:01:00.0: Boot video device initcall pci_init+0x0/0x3a returned 0 after 53 msecs calling i8259A_init_sysfs+0x0/0x22 calling ehci_hcd_init+0x0/0x1b ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup! ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19 initcall ehci_hcd_init+0x0/0x1b returned 0 after 15 msecs calling ohci_hcd_mod_init+0x0/0x6b ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup! ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19 initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 41 msecs calling vsyscall_init+0x0/0x27 initcall vsyscall_init+0x0/0x27 returned 0 after 0 msecs calling sbf_init+0x0/0xd5 initcall sbf_init+0x0/0xd5 returned 0 after 0 msecs calling i8237A_init_sysfs+0x0/0x22 initcall ohci_hcd_mod_init+0x0/0x6b returned 0 after 38 msecs calling uhci_hcd_init+0x0/0xac USB Universal Host Controller Interface driver v3.0 initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 11 msecs calling add_rtc_cmos+0x0/0x14 PM: Adding info for platform:rtc_cmos initcall uhci_hcd_init+0x0/0xac returned 0 after 15 msecs initcall add_rtc_cmos+0x0/0x14 returned 0 after 7 msecs calling cache_sysfs_init+0x0/0x5c initcall cache_sysfs_init+0x0/0x5c returned 0 after 0 msecs calling mce_init_device+0x0/0x78 PM: Adding info for No Bus:mcelog initcall mce_init_device+0x0/0x78 returned 0 after 3 msecs calling periodic_mcheck_init+0x0/0x3f initcall periodic_mcheck_init+0x0/0x3f returned 0 after 0 msecs calling thermal_throttle_init_device+0x0/0x68 initcall thermal_throttle_init_device+0x0/0x68 returned 0 after 0 msecs calling threshold_init_device+0x0/0x43 initcall threshold_init_device+0x0/0x43 returned 0 after 0 msecs calling msr_init+0x0/0xed PM: Adding info for No Bus:msr0 PM: Adding info for No Bus:msr1 initcall msr_init+0x0/0xed returned 0 after 7 msecs calling cpuid_init+0x0/0xed PM: Adding info for No Bus:cpu0 PM: Adding info for No Bus:cpu1 initcall cpuid_init+0x0/0xed returned 0 after 3 msecs calling init_lapic_sysfs+0x0/0x2d initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 msecs calling ioapic_init_sysfs+0x0/0x99 initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 0 msecs calling add_pcspkr+0x0/0x43 PM: Adding info for platform:pcspkr initcall add_pcspkr+0x0/0x43 returned 0 after 3 msecs calling uv_ptc_init+0x0/0x75 initcall uv_ptc_init+0x0/0x75 returned 0 after 0 msecs calling uv_bau_init+0x0/0x58d initcall uv_bau_init+0x0/0x58d returned 0 after 0 msecs calling audit_classes_init+0x0/0xaf initcall audit_classes_init+0x0/0xaf returned 0 after 0 msecs calling init+0x0/0x12 initcall init+0x0/0x12 returned 0 after 0 msecs calling init_vdso_vars+0x0/0x1f7 initcall init_vdso_vars+0x0/0x1f7 returned 0 after 0 msecs calling sysenter_setup+0x0/0x296 initcall sysenter_setup+0x0/0x296 returned 0 after 0 msecs calling init_sched_debug_procfs+0x0/0x2c initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 msecs calling ioresources_init+0x0/0x3c initcall ioresources_init+0x0/0x3c returned 0 after 0 msecs calling uid_cache_init+0x0/0x77 initcall uid_cache_init+0x0/0x77 returned 0 after 0 msecs calling init_posix_timers+0x0/0xb6 initcall init_posix_timers+0x0/0xb6 returned 0 after 0 msecs calling init_posix_cpu_timers+0x0/0xd4 initcall init_posix_cpu_timers+0x0/0xd4 returned 0 after 0 msecs calling nsproxy_cache_init+0x0/0x2d initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 msecs calling create_proc_profile+0x0/0x241 initcall create_proc_profile+0x0/0x241 returned 0 after 0 msecs calling timekeeping_init_device+0x0/0x22 initcall timekeeping_init_device+0x0/0x22 returned 0 after 0 msecs calling init_clocksource_sysfs+0x0/0x50 initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 0 msecs calling init_timer_list_procfs+0x0/0x2c initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 msecs calling futex_init+0x0/0x6f initcall futex_init+0x0/0x6f returned 0 after 0 msecs calling proc_dma_init+0x0/0x22 initcall proc_dma_init+0x0/0x22 returned 0 after 0 msecs calling percpu_modinit+0x0/0x74 initcall percpu_modinit+0x0/0x74 returned 0 after 0 msecs calling kallsyms_init+0x0/0x25 initcall kallsyms_init+0x0/0x25 returned 0 after 0 msecs calling snapshot_device_init+0x0/0x12 PM: Adding info for No Bus:snapshot initcall snapshot_device_init+0x0/0x12 returned 0 after 3 msecs calling audit_init+0x0/0x126 audit: initializing netlink socket (disabled) type=2000 audit(1218834701.408:1): initialized initcall audit_init+0x0/0x126 returned 0 after 7 msecs calling init_kprobes+0x0/0x143 initcall init_kprobes+0x0/0x143 returned 0 after 7 msecs calling init_lstats_procfs+0x0/0x25 initcall init_lstats_procfs+0x0/0x25 returned 0 after 0 msecs calling init_sched_switch_trace+0x0/0x41 Testing tracer sched_switch: PASSED initcall init_sched_switch_trace+0x0/0x41 returned 0 after 141 msecs calling init_stack_trace+0x0/0x12 Testing tracer sysprof: PASSED initcall init_stack_trace+0x0/0x12 returned 0 after 106 msecs calling init_function_trace+0x0/0x12 Testing tracer ftrace: PASSED Testing dynamic ftrace: PASSED initcall init_function_trace+0x0/0x12 returned 0 after 415 msecs calling init_wakeup_tracer+0x0/0x12 Testing tracer wakeup: .. no entries found ..FAILED! initcall init_wakeup_tracer+0x0/0x12 returned -1 after 213 msecs initcall init_wakeup_tracer+0x0/0x12 returned with error code -1 calling init_per_zone_pages_min+0x0/0x45 initcall init_per_zone_pages_min+0x0/0x45 returned 0 after 0 msecs calling pdflush_init+0x0/0x1d initcall pdflush_init+0x0/0x1d returned 0 after 0 msecs calling kswapd_init+0x0/0x68 initcall kswapd_init+0x0/0x68 returned 0 after 0 msecs calling setup_vmstat+0x0/0x44 initcall setup_vmstat+0x0/0x44 returned 0 after 0 msecs calling mm_sysfs_init+0x0/0x29 initcall mm_sysfs_init+0x0/0x29 returned 0 after 0 msecs calling procswaps_init+0x0/0x22 initcall procswaps_init+0x0/0x22 returned 0 after 0 msecs calling init_tmpfs+0x0/0x29 initcall init_tmpfs+0x0/0x29 returned 0 after 0 msecs calling slab_sysfs_init+0x0/0xf0 initcall slab_sysfs_init+0x0/0xf0 returned 0 after 11 msecs calling fasync_init+0x0/0x2a initcall fasync_init+0x0/0x2a returned 0 after 0 msecs calling aio_setup+0x0/0x6e initcall aio_setup+0x0/0x6e returned 0 after 0 msecs calling inotify_setup+0x0/0x12 initcall inotify_setup+0x0/0x12 returned 0 after 0 msecs calling inotify_user_setup+0x0/0xb8 initcall inotify_user_setup+0x0/0xb8 returned 0 after 0 msecs calling init_sys32_ioctl+0x0/0x85 initcall init_sys32_ioctl+0x0/0x85 returned 0 after 0 msecs calling init_mbcache+0x0/0x14 initcall init_mbcache+0x0/0x14 returned 0 after 0 msecs calling vmcore_init+0x0/0x8b5 initcall vmcore_init+0x0/0x8b5 returned 0 after 0 msecs calling configfs_init+0x0/0xb3 initcall configfs_init+0x0/0xb3 returned 0 after 0 msecs calling init_devpts_fs+0x0/0x3f initcall init_devpts_fs+0x0/0x3f returned 0 after 0 msecs calling init_ext3_fs+0x0/0x6a initcall init_ext3_fs+0x0/0x6a returned 0 after 0 msecs calling journal_init+0x0/0x85 initcall journal_init+0x0/0x85 returned 0 after 0 msecs calling init_ext2_fs+0x0/0x5a initcall init_ext2_fs+0x0/0x5a returned 0 after 0 msecs calling init_ramfs_fs+0x0/0x12 initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 msecs calling init_fat_fs+0x0/0x4f initcall init_fat_fs+0x0/0x4f returned 0 after 0 msecs calling init_vfat_fs+0x0/0x12 initcall init_vfat_fs+0x0/0x12 returned 0 after 0 msecs calling init_nls_cp855+0x0/0x12 initcall init_nls_cp855+0x0/0x12 returned 0 after 0 msecs calling init_nls_cp860+0x0/0x12 initcall init_nls_cp860+0x0/0x12 returned 0 after 0 msecs calling init_nls_cp861+0x0/0x12 initcall init_nls_cp861+0x0/0x12 returned 0 after 0 msecs calling init_nls_cp862+0x0/0x12 initcall init_nls_cp862+0x0/0x12 returned 0 after 0 msecs calling init_nls_cp866+0x0/0x12 initcall init_nls_cp866+0x0/0x12 returned 0 after 0 msecs calling init_nls_cp869+0x0/0x12 initcall init_nls_cp869+0x0/0x12 returned 0 after 0 msecs calling init_nls_cp1251+0x0/0x12 initcall init_nls_cp1251+0x0/0x12 returned 0 after 0 msecs calling init_nls_ascii+0x0/0x12 initcall init_nls_ascii+0x0/0x12 returned 0 after 0 msecs calling init_nls_iso8859_1+0x0/0x12 initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 msecs calling init_nls_iso8859_2+0x0/0x12 initcall init_nls_iso8859_2+0x0/0x12 returned 0 after 0 msecs calling init_nls_iso8859_4+0x0/0x12 initcall init_nls_iso8859_4+0x0/0x12 returned 0 after 0 msecs calling init_nls_iso8859_13+0x0/0x12 initcall init_nls_iso8859_13+0x0/0x12 returned 0 after 0 msecs calling init_nls_iso8859_15+0x0/0x12 initcall init_nls_iso8859_15+0x0/0x12 returned 0 after 0 msecs calling init_smb_fs+0x0/0x6c initcall init_smb_fs+0x0/0x6c returned 0 after 0 msecs calling init_ncp_fs+0x0/0x5a initcall init_ncp_fs+0x0/0x5a returned 0 after 0 msecs calling init_efs_fs+0x0/0x68 EFS: 1.0a - http://aeschi.ch.eu.org/efs/ initcall init_efs_fs+0x0/0x68 returned 0 after 3 msecs calling init_adfs_fs+0x0/0x5a initcall init_adfs_fs+0x0/0x5a returned 0 after 0 msecs calling fuse_init+0x0/0x125 fuse init (API version 7.9) PM: Adding info for No Bus:fuse initcall fuse_init+0x0/0x125 returned 0 after 3 msecs calling init_befs_fs+0x0/0x7b BeFS version: 0.9.3 initcall init_befs_fs+0x0/0x7b returned 0 after 3 msecs calling init_gfs2_fs+0x0/0x178 GFS2 (built Aug 15 2008 23:09:32) installed initcall init_gfs2_fs+0x0/0x178 returned 0 after 3 msecs calling key_proc_init+0x0/0x33 initcall key_proc_init+0x0/0x33 returned 0 after 0 msecs calling crypto_algapi_init+0x0/0xd initcall crypto_algapi_init+0x0/0xd returned 0 after 0 msecs calling blkcipher_module_init+0x0/0x2a initcall blkcipher_module_init+0x0/0x2a returned 0 after 0 msecs calling seqiv_module_init+0x0/0x12 initcall seqiv_module_init+0x0/0x12 returned 0 after 0 msecs calling cryptomgr_init+0x0/0x12 initcall cryptomgr_init+0x0/0x12 returned 0 after 0 msecs calling hmac_module_init+0x0/0x12 initcall hmac_module_init+0x0/0x12 returned 0 after 0 msecs calling md5_mod_init+0x0/0x12 initcall md5_mod_init+0x0/0x12 returned 0 after 0 msecs calling rmd128_mod_init+0x0/0x12 initcall rmd128_mod_init+0x0/0x12 returned 0 after 0 msecs calling rmd160_mod_init+0x0/0x12 initcall rmd160_mod_init+0x0/0x12 returned 0 after 0 msecs calling sha1_generic_mod_init+0x0/0x12 initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 0 msecs calling wp512_mod_init+0x0/0x64 initcall wp512_mod_init+0x0/0x64 returned 0 after 0 msecs calling tgr192_mod_init+0x0/0x64 initcall tgr192_mod_init+0x0/0x64 returned 0 after 0 msecs calling crypto_cbc_module_init+0x0/0x12 initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 msecs calling crypto_ctr_module_init+0x0/0x3f initcall crypto_ctr_module_init+0x0/0x3f returned 0 after 0 msecs calling des_generic_mod_init+0x0/0x3f initcall des_generic_mod_init+0x0/0x3f returned 0 after 0 msecs calling fcrypt_mod_init+0x0/0x12 initcall fcrypt_mod_init+0x0/0x12 returned 0 after 0 msecs calling serpent_mod_init+0x0/0x3f initcall serpent_mod_init+0x0/0x3f returned 0 after 0 msecs calling camellia_init+0x0/0x12 initcall camellia_init+0x0/0x12 returned 0 after 0 msecs calling arc4_init+0x0/0x12 initcall arc4_init+0x0/0x12 returned 0 after 0 msecs calling tea_mod_init+0x0/0x64 initcall tea_mod_init+0x0/0x64 returned 0 after 0 msecs calling deflate_mod_init+0x0/0x12 initcall deflate_mod_init+0x0/0x12 returned 0 after 0 msecs calling crc32c_mod_init+0x0/0x3f initcall crc32c_mod_init+0x0/0x3f returned 0 after 0 msecs calling crypto_authenc_module_init+0x0/0x12 initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 0 msecs calling bsg_init+0x0/0x126 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) initcall bsg_init+0x0/0x126 returned 0 after 3 msecs calling noop_init+0x0/0x14 io scheduler noop registered initcall noop_init+0x0/0x14 returned 0 after 3 msecs calling as_init+0x0/0x14 io scheduler anticipatory registered (default) initcall as_init+0x0/0x14 returned 0 after 3 msecs calling init_kmp+0x0/0x12 initcall init_kmp+0x0/0x12 returned 0 after 0 msecs calling init_bm+0x0/0x12 initcall init_bm+0x0/0x12 returned 0 after 0 msecs calling init_fsm+0x0/0x12 initcall init_fsm+0x0/0x12 returned 0 after 0 msecs calling percpu_counter_startup+0x0/0x14 initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs calling max732x_init+0x0/0x14 i2c-core: driver [max732x] registered initcall max732x_init+0x0/0x14 returned 0 after 3 msecs calling pci_proc_init+0x0/0x6a initcall pci_proc_init+0x0/0x6a returned 0 after 0 msecs calling pcie_portdrv_init+0x0/0x4c pcieport-driver 0000:00:0b.0: setting latency timer to 64 pcieport-driver 0000:00:0b.0: found MSI capability pci_express 0000:00:0b.0:pcie00: allocate port service PM: Adding info for pci_express:0000:00:0b.0:pcie00 pcieport-driver 0000:00:0c.0: setting latency timer to 64 pcieport-driver 0000:00:0c.0: found MSI capability pci_express 0000:00:0c.0:pcie00: allocate port service PM: Adding info for pci_express:0000:00:0c.0:pcie00 pcieport-driver 0000:00:0d.0: setting latency timer to 64 pcieport-driver 0000:00:0d.0: found MSI capability pci_express 0000:00:0d.0:pcie00: allocate port service PM: Adding info for pci_express:0000:00:0d.0:pcie00 pcieport-driver 0000:00:0e.0: setting latency timer to 64 pcieport-driver 0000:00:0e.0: found MSI capability pci_express 0000:00:0e.0:pcie00: allocate port service PM: Adding info for pci_express:0000:00:0e.0:pcie00 initcall pcie_portdrv_init+0x0/0x4c returned 0 after 61 msecs calling aer_service_init+0x0/0x20 initcall aer_service_init+0x0/0x20 returned 0 after 0 msecs calling vgg2432a4_init+0x0/0x12 initcall vgg2432a4_init+0x0/0x12 returned 0 after 0 msecs calling display_class_init+0x0/0x7e initcall display_class_init+0x0/0x7e returned 0 after 0 msecs calling rand_initialize+0x0/0x31 initcall rand_initialize+0x0/0x31 returned 0 after 0 msecs calling tty_init+0x0/0x1cd PM: Adding info for No Bus:tty PM: Adding info for No Bus:console PM: Adding info for No Bus:ptmx PM: Adding info for No Bus:tty0 PM: Adding info for No Bus:vcs PM: Adding info for No Bus:vcsa PM: Adding info for No Bus:tty1 PM: Adding info for No Bus:tty2 PM: Adding info for No Bus:tty3 PM: Adding info for No Bus:tty4 PM: Adding info for No Bus:tty5 PM: Adding info for No Bus:tty6 PM: Adding info for No Bus:tty7 PM: Adding info for No Bus:tty8 PM: Adding info for No Bus:tty9 PM: Adding info for No Bus:tty10 PM: Adding info for No Bus:tty11 PM: Adding info for No Bus:tty12 PM: Adding info for No Bus:tty13 PM: Adding info for No Bus:tty14 PM: Adding info for No Bus:tty15 PM: Adding info for No Bus:tty16 PM: Adding info for No Bus:tty17 PM: Adding info for No Bus:tty18 PM: Adding info for No Bus:tty19 PM: Adding info for No Bus:tty20 PM: Adding info for No Bus:tty21 PM: Adding info for No Bus:tty22 PM: Adding info for No Bus:tty23 PM: Adding info for No Bus:tty24 PM: Adding info for No Bus:tty25 PM: Adding info for No Bus:tty26 PM: Adding info for No Bus:tty27 PM: Adding info for No Bus:tty28 PM: Adding info for No Bus:tty29 PM: Adding info for No Bus:tty30 PM: Adding info for No Bus:tty31 PM: Adding info for No Bus:tty32 PM: Adding info for No Bus:tty33 PM: Adding info for No Bus:tty34 PM: Adding info for No Bus:tty35 PM: Adding info for No Bus:tty36 PM: Adding info for No Bus:tty37 PM: Adding info for No Bus:tty38 PM: Adding info for No Bus:tty39 PM: Adding info for No Bus:tty40 PM: Adding info for No Bus:tty41 PM: Adding info for No Bus:tty42 PM: Adding info for No Bus:tty43 PM: Adding info for No Bus:tty44 PM: Adding info for No Bus:tty45 PM: Adding info for No Bus:tty46 PM: Adding info for No Bus:tty47 PM: Adding info for No Bus:tty48 PM: Adding info for No Bus:tty49 PM: Adding info for No Bus:tty50 PM: Adding info for No Bus:tty51 PM: Adding info for No Bus:tty52 PM: Adding info for No Bus:tty53 PM: Adding info for No Bus:tty54 PM: Adding info for No Bus:tty55 PM: Adding info for No Bus:tty56 PM: Adding info for No Bus:tty57 PM: Adding info for No Bus:tty58 PM: Adding info for No Bus:tty59 PM: Adding info for No Bus:tty60 PM: Adding info for No Bus:tty61 PM: Adding info for No Bus:tty62 PM: Adding info for No Bus:tty63 initcall tty_init+0x0/0x1cd returned 0 after 202 msecs calling pty_init+0x0/0x26f initcall pty_init+0x0/0x26f returned 0 after 0 msecs calling isicom_init+0x0/0x19d initcall isicom_init+0x0/0x19d returned 0 after 0 msecs calling synclink_init+0x0/0x258 SyncLink serial driver $Revision: 4.38 $ PM: Adding info for No Bus:ttySL0 PM: Adding info for No Bus:ttySL1 PM: Adding info for No Bus:ttySL2 PM: Adding info for No Bus:ttySL3 PM: Adding info for No Bus:ttySL4 PM: Adding info for No Bus:ttySL5 PM: Adding info for No Bus:ttySL6 PM: Adding info for No Bus:ttySL7 PM: Adding info for No Bus:ttySL8 PM: Adding info for No Bus:ttySL9 PM: Adding info for No Bus:ttySL10 PM: Adding info for No Bus:ttySL11 PM: Adding info for No Bus:ttySL12 PM: Adding info for No Bus:ttySL13 PM: Adding info for No Bus:ttySL14 PM: Adding info for No Bus:ttySL15 PM: Adding info for No Bus:ttySL16 PM: Adding info for No Bus:ttySL17 PM: Adding info for No Bus:ttySL18 PM: Adding info for No Bus:ttySL19 PM: Adding info for No Bus:ttySL20 PM: Adding info for No Bus:ttySL21 PM: Adding info for No Bus:ttySL22 PM: Adding info for No Bus:ttySL23 PM: Adding info for No Bus:ttySL24 PM: Adding info for No Bus:ttySL25 PM: Adding info for No Bus:ttySL26 PM: Adding info for No Bus:ttySL27 PM: Adding info for No Bus:ttySL28 PM: Adding info for No Bus:ttySL29 PM: Adding info for No Bus:ttySL30 PM: Adding info for No Bus:ttySL31 PM: Adding info for No Bus:ttySL32 PM: Adding info for No Bus:ttySL33 PM: Adding info for No Bus:ttySL34 PM: Adding info for No Bus:ttySL35 PM: Adding info for No Bus:ttySL36 PM: Adding info for No Bus:ttySL37 PM: Adding info for No Bus:ttySL38 PM: Adding info for No Bus:ttySL39 PM: Adding info for No Bus:ttySL40 PM: Adding info for No Bus:ttySL41 PM: Adding info for No Bus:ttySL42 PM: Adding info for No Bus:ttySL43 PM: Adding info for No Bus:ttySL44 PM: Adding info for No Bus:ttySL45 PM: Adding info for No Bus:ttySL46 PM: Adding info for No Bus:ttySL47 PM: Adding info for No Bus:ttySL48 PM: Adding info for No Bus:ttySL49 PM: Adding info for No Bus:ttySL50 PM: Adding info for No Bus:ttySL51 PM: Adding info for No Bus:ttySL52 PM: Adding info for No Bus:ttySL53 PM: Adding info for No Bus:ttySL54 PM: Adding info for No Bus:ttySL55 PM: Adding info for No Bus:ttySL56 PM: Adding info for No Bus:ttySL57 PM: Adding info for No Bus:ttySL58 PM: Adding info for No Bus:ttySL59 PM: Adding info for No Bus:ttySL60 PM: Adding info for No Bus:ttySL61 PM: Adding info for No Bus:ttySL62 PM: Adding info for No Bus:ttySL63 PM: Adding info for No Bus:ttySL64 PM: Adding info for No Bus:ttySL65 PM: Adding info for No Bus:ttySL66 PM: Adding info for No Bus:ttySL67 PM: Adding info for No Bus:ttySL68 PM: Adding info for No Bus:ttySL69 PM: Adding info for No Bus:ttySL70 PM: Adding info for No Bus:ttySL71 PM: Adding info for No Bus:ttySL72 PM: Adding info for No Bus:ttySL73 PM: Adding info for No Bus:ttySL74 PM: Adding info for No Bus:ttySL75 PM: Adding info for No Bus:ttySL76 PM: Adding info for No Bus:ttySL77 PM: Adding info for No Bus:ttySL78 PM: Adding info for No Bus:ttySL79 PM: Adding info for No Bus:ttySL80 PM: Adding info for No Bus:ttySL81 PM: Adding info for No Bus:ttySL82 PM: Adding info for No Bus:ttySL83 PM: Adding info for No Bus:ttySL84 PM: Adding info for No Bus:ttySL85 PM: Adding info for No Bus:ttySL86 PM: Adding info for No Bus:ttySL87 PM: Adding info for No Bus:ttySL88 PM: Adding info for No Bus:ttySL89 PM: Adding info for No Bus:ttySL90 PM: Adding info for No Bus:ttySL91 PM: Adding info for No Bus:ttySL92 PM: Adding info for No Bus:ttySL93 PM: Adding info for No Bus:ttySL94 PM: Adding info for No Bus:ttySL95 PM: Adding info for No Bus:ttySL96 PM: Adding info for No Bus:ttySL97 PM: Adding info for No Bus:ttySL98 PM: Adding info for No Bus:ttySL99 PM: Adding info for No Bus:ttySL100 PM: Adding info for No Bus:ttySL101 PM: Adding info for No Bus:ttySL102 PM: Adding info for No Bus:ttySL103 PM: Adding info for No Bus:ttySL104 PM: Adding info for No Bus:ttySL105 PM: Adding info for No Bus:ttySL106 PM: Adding info for No Bus:ttySL107 PM: Adding info for No Bus:ttySL108 PM: Adding info for No Bus:ttySL109 PM: Adding info for No Bus:ttySL110 PM: Adding info for No Bus:ttySL111 PM: Adding info for No Bus:ttySL112 PM: Adding info for No Bus:ttySL113 PM: Adding info for No Bus:ttySL114 PM: Adding info for No Bus:ttySL115 PM: Adding info for No Bus:ttySL116 PM: Adding info for No Bus:ttySL117 PM: Adding info for No Bus:ttySL118 PM: Adding info for No Bus:ttySL119 PM: Adding info for No Bus:ttySL120 PM: Adding info for No Bus:ttySL121 PM: Adding info for No Bus:ttySL122 PM: Adding info for No Bus:ttySL123 PM: Adding info for No Bus:ttySL124 PM: Adding info for No Bus:ttySL125 PM: Adding info for No Bus:ttySL126 PM: Adding info for No Bus:ttySL127 SyncLink serial driver $Revision: 4.38 $, tty major#253 initcall synclink_init+0x0/0x258 returned 0 after 396 msecs calling n_hdlc_init+0x0/0x94 HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 N_HDLC line discipline registered. initcall n_hdlc_init+0x0/0x94 returned 0 after 7 msecs calling raw_init+0x0/0xdd PM: Adding info for No Bus:rawctl initcall raw_init+0x0/0xdd returned 0 after 3 msecs calling r3964_init+0x0/0x44 r3964: Philips r3964 Driver $Revision: 1.10 $ initcall r3964_init+0x0/0x44 returned 0 after 3 msecs calling nvram_init+0x0/0x8a PM: Adding info for No Bus:nvram Non-volatile memory driver v1.2 initcall nvram_init+0x0/0x8a returned 0 after 3 msecs calling i8k_init+0x0/0x1ef initcall i8k_init+0x0/0x1ef returned -19 after 0 msecs calling serial8250_init+0x0/0x118 Serial: 8250/16550 driver4 ports, IRQ sharing disabled PM: Adding info for platform:serial8250 serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A PM: Adding info for No Bus:ttyS0 PM: Adding info for No Bus:ttyS1 PM: Adding info for No Bus:ttyS2 PM: Adding info for No Bus:ttyS3 initcall serial8250_init+0x0/0x118 returned 0 after 267 msecs calling serial8250_pci_init+0x0/0x1b initcall serial8250_pci_init+0x0/0x1b returned 0 after 0 msecs calling jsm_init_module+0x0/0x48 initcall jsm_init_module+0x0/0x48 returned 0 after 0 msecs calling topology_sysfs_init+0x0/0x48 initcall topology_sysfs_init+0x0/0x48 returned 0 after 0 msecs calling brd_init+0x0/0x19c PM: Adding info for No Bus:ram0 PM: Adding info for No Bus:1:0 PM: Adding info for No Bus:ram1 PM: Adding info for No Bus:1:1 PM: Adding info for No Bus:ram2 PM: Adding info for No Bus:1:2 PM: Adding info for No Bus:ram3 PM: Adding info for No Bus:1:3 PM: Adding info for No Bus:ram4 PM: Adding info for No Bus:1:4 PM: Adding info for No Bus:ram5 PM: Adding info for No Bus:1:5 PM: Adding info for No Bus:ram6 PM: Adding info for No Bus:1:6 PM: Adding info for No Bus:ram7 PM: Adding info for No Bus:1:7 PM: Adding info for No Bus:ram8 PM: Adding info for No Bus:1:8 PM: Adding info for No Bus:ram9 PM: Adding info for No Bus:1:9 PM: Adding info for No Bus:ram10 PM: Adding info for No Bus:1:10 PM: Adding info for No Bus:ram11 PM: Adding info for No Bus:1:11 PM: Adding info for No Bus:ram12 PM: Adding info for No Bus:1:12 PM: Adding info for No Bus:ram13 PM: Adding info for No Bus:1:13 PM: Adding info for No Bus:ram14 PM: Adding info for No Bus:1:14 PM: Adding info for No Bus:ram15 PM: Adding info for No Bus:1:15 brd: module loaded initcall brd_init+0x0/0x19c returned 0 after 91 msecs calling cpqarray_init+0x0/0x264 Compaq SMART2 Driver (v 2.6.0) initcall cpqarray_init+0x0/0x264 returned 0 after 3 msecs calling mm_init+0x0/0x17b MM: desc_per_page = 128 initcall mm_init+0x0/0x17b returned 0 after 0 msecs calling nbd_init+0x0/0x2d5 nbd: registered device at major 43 PM: Adding info for No Bus:nbd0 PM: Adding info for No Bus:43:0 PM: Adding info for No Bus:nbd1 PM: Adding info for No Bus:43:1 PM: Adding info for No Bus:nbd2 PM: Adding info for No Bus:43:2 PM: Adding info for No Bus:nbd3 PM: Adding info for No Bus:43:3 PM: Adding info for No Bus:nbd4 PM: Adding info for No Bus:43:4 PM: Adding info for No Bus:nbd5 PM: Adding info for No Bus:43:5 PM: Adding info for No Bus:nbd6 PM: Adding info for No Bus:43:6 PM: Adding info for No Bus:nbd7 PM: Adding info for No Bus:43:7 PM: Adding info for No Bus:nbd8 PM: Adding info for No Bus:43:8 PM: Adding info for No Bus:nbd9 PM: Adding info for No Bus:43:9 PM: Adding info for No Bus:nbd10 PM: Adding info for No Bus:43:10 PM: Adding info for No Bus:nbd11 PM: Adding info for No Bus:43:11 PM: Adding info for No Bus:nbd12 PM: Adding info for No Bus:43:12 PM: Adding info for No Bus:nbd13 PM: Adding info for No Bus:43:13 PM: Adding info for No Bus:nbd14 PM: Adding info for No Bus:43:14 PM: Adding info for No Bus:nbd15 PM: Adding info for No Bus:43:15 initcall nbd_init+0x0/0x2d5 returned 0 after 99 msecs calling init+0x0/0x2a initcall init+0x0/0x2a returned 0 after 0 msecs calling carm_init+0x0/0x1b initcall carm_init+0x0/0x1b returned 0 after 0 msecs calling tifm_7xx1_init+0x0/0x1b initcall tifm_7xx1_init+0x0/0x1b returned 0 after 0 msecs calling ioc4_init+0x0/0x20 initcall ioc4_init+0x0/0x20 returned 0 after 0 msecs calling pasic3_base_init+0x0/0x19 initcall pasic3_base_init+0x0/0x19 returned -19 after 0 msecs calling e1000_init_module+0x0/0x6b e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. initcall e1000_init_module+0x0/0x6b returned 0 after 7 msecs calling igb_init_module+0x0/0x56 Intel(R) Gigabit Ethernet Network Driver - version 1.2.45-k2 Copyright (c) 2008 Intel Corporation. initcall igb_init_module+0x0/0x56 returned 0 after 7 msecs calling ixgbe_init_module+0x0/0x5a ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.18-k2 ixgbe: Copyright (c) 1999-2007 Intel Corporation. initcall ixgbe_init_module+0x0/0x5a returned 0 after 11 msecs calling ipg_init_module+0x0/0x1b initcall ipg_init_module+0x0/0x1b returned 0 after 0 msecs calling t1_init_module+0x0/0x1b initcall t1_init_module+0x0/0x1b returned 0 after 0 msecs calling cxgb3_init_module+0x0/0x20 initcall cxgb3_init_module+0x0/0x20 returned 0 after 0 msecs calling bonding_init+0x0/0x8df Ethernet Channel Bonding Driver: v3.3.0 (June 10, 2008) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. PM: Adding info for No Bus:bond0 initcall bonding_init+0x0/0x8df returned 0 after 11 msecs calling atl1_init_module+0x0/0x1b initcall atl1_init_module+0x0/0x1b returned 0 after 0 msecs calling atl1e_init_module+0x0/0x1b initcall atl1e_init_module+0x0/0x1b returned 0 after 0 msecs calling rr_init_module+0x0/0x1b initcall rr_init_module+0x0/0x1b returned 0 after 0 msecs calling cas_init+0x0/0x3d initcall cas_init+0x0/0x3d returned 0 after 0 msecs calling vortex_init+0x0/0xad initcall vortex_init+0x0/0xad returned 0 after 0 msecs calling typhoon_init+0x0/0x1b initcall typhoon_init+0x0/0x1b returned 0 after 0 msecs calling eepro100_init_module+0x0/0x1b initcall eepro100_init_module+0x0/0x1b returned 0 after 0 msecs calling e100_init_module+0x0/0x5d e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation initcall e100_init_module+0x0/0x5d returned 0 after 7 msecs calling sis900_init_module+0x0/0x1b initcall sis900_init_module+0x0/0x1b returned 0 after 0 msecs calling tg3_init+0x0/0x1b initcall tg3_init+0x0/0x1b returned 0 after 0 msecs calling bnx2x_init+0x0/0x1b initcall bnx2x_init+0x0/0x1b returned 0 after 0 msecs calling skge_init_module+0x0/0x1b initcall skge_init_module+0x0/0x1b returned 0 after 0 msecs calling velocity_init_module+0x0/0x3b initcall velocity_init_module+0x0/0x3b returned 0 after 0 msecs calling vsc8244_init+0x0/0x12 initcall vsc8244_init+0x0/0x12 returned 0 after 0 msecs calling fixed_mdio_bus_init+0x0/0xa8 PM: Adding info for platform:Fixed MDIO bus.0 Fixed MDIO Bus: probed initcall fixed_mdio_bus_init+0x0/0xa8 returned 0 after 7 msecs calling hamachi_init+0x0/0x1b initcall hamachi_init+0x0/0x1b returned 0 after 0 msecs calling net_olddevs_init+0x0/0xa0 initcall net_olddevs_init+0x0/0xa0 returned 0 after 0 msecs calling hp100_module_init+0x0/0x1b initcall hp100_module_init+0x0/0x1b returned 0 after 0 msecs calling init_nic+0x0/0x1b forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. forcedeth 0000:00:0a.0: setting latency timer to 64 PM: Adding info for No Bus:eth0 forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 9, addr 00:13:d4:dc:41:12 forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 initcall init_nic+0x0/0x1b returned 0 after 514 msecs calling ql3xxx_init_module+0x0/0x1b initcall ql3xxx_init_module+0x0/0x1b returned 0 after 3 msecs calling ppp_init+0x0/0xa3 PPP generic driver version 2.4.2 PM: Adding info for No Bus:ppp initcall ppp_init+0x0/0xa3 returned 0 after 7 msecs calling deflate_init+0x0/0x3b PPP Deflate Compression module registered initcall deflate_init+0x0/0x3b returned 0 after 3 msecs calling pppox_init+0x0/0x12 NET: Registered protocol family 24 initcall pppox_init+0x0/0x12 returned 0 after 0 msecs calling pppoe_init+0x0/0x99 initcall pppoe_init+0x0/0x99 returned 0 after 0 msecs calling slip_init+0x0/0xb2 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). SLIP linefill/keepalive option. initcall slip_init+0x0/0xb2 returned 0 after 7 msecs calling rtl8139_init_module+0x0/0x1b 8139too Fast Ethernet driver 0.9.28 PM: Adding info for No Bus:eth1 eth1: RealTek RTL8139 at 0xffffc20000004000, 00:c0:df:03:68:5d, IRQ 11 eth1: Identified 8139 chip type 'RTL-8139B' initcall rtl8139_init_module+0x0/0x1b returned 0 after 11 msecs calling eql_init_module+0x0/0x65 Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) PM: Adding info for No Bus:eql initcall eql_init_module+0x0/0x65 returned 0 after 7 msecs calling rio_init+0x0/0x1b initcall rio_init+0x0/0x1b returned 0 after 0 msecs calling s2io_starter+0x0/0x1b initcall s2io_starter+0x0/0x1b returned 0 after 0 msecs calling enc28j60_init+0x0/0x23 initcall enc28j60_init+0x0/0x23 returned 0 after 0 msecs calling strip_init_driver+0x0/0x6a STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels) initcall strip_init_driver+0x0/0x6a returned 0 after 3 msecs calling init_netconsole+0x0/0x238 console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x238 returned 0 after 3 msecs calling netxen_init_module+0x0/0x48 initcall netxen_init_module+0x0/0x48 returned 0 after 0 msecs calling init+0x0/0x12 initcall init+0x0/0x12 returned 0 after 0 msecs calling efx_init_module+0x0/0x8f Solarflare NET driver v2.2 initcall efx_init_module+0x0/0x8f returned 0 after 3 msecs calling saa7146_vv_init_module+0x0/0x8 initcall saa7146_vv_init_module+0x0/0x8 returned 0 after 0 msecs calling videodev_init+0x0/0x84 Linux video capture interface: v2.00 initcall videodev_init+0x0/0x84 returned 0 after 3 msecs calling v4l2_i2c_drv_init+0x0/0xfd i2c-core: driver [tvaudio'] registered i2c-core: driver [tvaudio] registered initcall v4l2_i2c_drv_init+0x0/0xfd returned 0 after 7 msecs calling init_saa_5246a+0x0/0x2c SAA5246A (or compatible) Teletext decoder driver version 1.8 i2c-core: driver [SAA5246A] registered initcall init_saa_5246a+0x0/0x2c returned 0 after 7 msecs calling init_saa_5249+0x0/0x2c SAA5249 driver (SAA5249 interface) for VideoText version 1.8 i2c-core: driver [SAA5249] registered initcall init_saa_5249+0x0/0x2c returned 0 after 7 msecs calling v4l2_i2c_drv_init+0x0/0xfe i2c-core: driver [saa7115'] registered i2c-core: driver [saa7115] registered initcall v4l2_i2c_drv_init+0x0/0xfe returned 0 after 7 msecs calling v4l2_i2c_drv_init+0x0/0x74 i2c-core: driver [saa717x] registered initcall v4l2_i2c_drv_init+0x0/0x74 returned 0 after 3 msecs calling v4l2_i2c_drv_init+0x0/0x77 i2c-core: driver [saa7127] registered initcall v4l2_i2c_drv_init+0x0/0x77 returned 0 after 3 msecs calling adv7175_init+0x0/0x14 i2c-core: driver [adv7175] registered initcall adv7175_init+0x0/0x14 returned 0 after 3 msecs calling cx8800_init+0x0/0x37 cx88/0: cx2388x v4l2 driver version 0.0.6 loaded initcall cx8800_init+0x0/0x37 returned 0 after 3 msecs calling cx8802_init+0x0/0x37 cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded initcall cx8802_init+0x0/0x37 returned 0 after 3 msecs calling usbvision_init+0x0/0x105 usbcore: registered new interface driver usbvision USBVision USB Video Device Driver for Linux : 0.9.9 initcall usbvision_init+0x0/0x105 returned 0 after 7 msecs calling tvp5150_init+0x0/0x14 i2c-core: driver [tvp5150] registered initcall tvp5150_init+0x0/0x14 returned 0 after 3 msecs calling v4l2_i2c_drv_init+0x0/0xfe i2c-core: driver [msp3400'] registered i2c-core: driver [msp3400] registered initcall v4l2_i2c_drv_init+0x0/0xfe returned 0 after 7 msecs calling v4l2_i2c_drv_init+0x0/0x77 i2c-core: driver [cs5345] registered initcall v4l2_i2c_drv_init+0x0/0x77 returned 0 after 3 msecs calling v4l2_i2c_drv_init+0x0/0xfd i2c-core: driver [cs53l32a'] registered i2c-core: driver [cs53l32a] registered initcall v4l2_i2c_drv_init+0x0/0xfd returned 0 after 7 msecs calling v4l2_i2c_drv_init+0x0/0x74 i2c-core: driver [m52790] registered initcall v4l2_i2c_drv_init+0x0/0x74 returned 0 after 3 msecs calling v4l2_i2c_drv_init+0x0/0xfd i2c-core: driver [wm8775'] registered i2c-core: driver [wm8775] registered initcall v4l2_i2c_drv_init+0x0/0xfd returned 0 after 7 msecs calling v4l2_i2c_drv_init+0x0/0x74 i2c-core: driver [wm8739] registered initcall v4l2_i2c_drv_init+0x0/0x74 returned 0 after 3 msecs calling v4l2_i2c_drv_init+0x0/0x74 i2c-core: driver [vp27smpx] registered initcall v4l2_i2c_drv_init+0x0/0x74 returned 0 after 3 msecs calling mxb_init_module+0x0/0x57 saa7146: register extension 'Multimedia eXtension Board'. initcall mxb_init_module+0x0/0x57 returned 0 after 3 msecs calling tuner3036_init+0x0/0x14 i2c-core: driver [sab3036] registered initcall tuner3036_init+0x0/0x14 returned 0 after 3 msecs calling v4l2_i2c_drv_init+0x0/0xfd i2c-core: driver [tuner'] registered i2c-core: driver [tuner] registered initcall v4l2_i2c_drv_init+0x0/0xfd returned 0 after 7 msecs calling v4l2_i2c_drv_init+0x0/0xfe i2c-core: driver [cx25840'] registered i2c-core: driver [cx25840] registered initcall v4l2_i2c_drv_init+0x0/0xfe returned 0 after 7 msecs calling v4l2_i2c_drv_init+0x0/0x74 i2c-core: driver [upd64031a] registered initcall v4l2_i2c_drv_init+0x0/0x74 returned 0 after 3 msecs calling v4l2_i2c_drv_init+0x0/0x74 i2c-core: driver [upd64083] registered initcall v4l2_i2c_drv_init+0x0/0x74 returned 0 after 3 msecs calling cafe_init+0x0/0x91 Marvell M88ALP01 'CAFE' Camera Controller version 2 initcall cafe_init+0x0/0x91 returned 0 after 3 msecs calling ov7670_mod_init+0x0/0x22 OmniVision ov7670 sensor driver, at your service i2c-core: driver [ov7670] registered initcall ov7670_mod_init+0x0/0x22 returned 0 after 7 msecs calling stk_camera_init+0x0/0x3a usbcore: registered new interface driver stkwebcam initcall stk_camera_init+0x0/0x3a returned 0 after 3 msecs calling sn9c102_module_init+0x0/0x5b sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49 usbcore: registered new interface driver sn9c102 initcall sn9c102_module_init+0x0/0x5b returned 0 after 7 msecs calling et61x251_module_init+0x0/0x5a et61x251: V4L2 driver for ET61X[12]51 PC Camera Controllers v1:1.09 usbcore: registered new interface driver et61x251 initcall et61x251_module_init+0x0/0x5a returned 0 after 7 msecs calling konicawc_init+0x0/0xb3 konicawc: Konica Webcam driver v1.4 usbcore: registered new interface driver konicawc initcall konicawc_init+0x0/0xb3 returned 0 after 7 msecs calling usb_vicam_init+0x0/0x38 usbcore: registered new interface driver vicam initcall usb_vicam_init+0x0/0x38 returned 0 after 3 msecs calling module_start+0x0/0xb6 ivtv: Start initialization, version 1.3.0 ivtv: End initialization initcall module_start+0x0/0xb6 returned 0 after 7 msecs calling maxiradio_radio_init+0x0/0x1b initcall maxiradio_radio_init+0x0/0x1b returned 0 after 0 msecs calling gemtek_pci_init_module+0x0/0x1b initcall gemtek_pci_init_module+0x0/0x1b returned 0 after 0 msecs calling maestro_radio_init+0x0/0x38 initcall maestro_radio_init+0x0/0x38 returned 0 after 0 msecs calling dsbr100_init+0x0/0x34 usbcore: registered new interface driver dsbr100 dsbr100: v0.41:D-Link DSB-R100 USB FM radio driver initcall dsbr100_init+0x0/0x34 returned 0 after 7 msecs calling spi_transport_init+0x0/0x2e initcall spi_transport_init+0x0/0x2e returned 0 after 0 msecs calling fc_transport_init+0x0/0x4c initcall fc_transport_init+0x0/0x4c returned 0 after 0 msecs calling iscsi_transport_init+0x0/0x148 Loading iSCSI transport class v2.0-870. initcall iscsi_transport_init+0x0/0x148 returned 0 after 3 msecs calling sas_transport_init+0x0/0xbb initcall sas_transport_init+0x0/0xbb returned 0 after 0 msecs calling ahc_linux_init+0x0/0x59 initcall ahc_linux_init+0x0/0x59 returned 0 after 0 msecs calling init_sd+0x0/0xef Driver 'sd' needs updating - please use bus_type methods initcall init_sd+0x0/0xef returned 0 after 3 msecs calling init_sr+0x0/0x49 Driver 'sr' needs updating - please use bus_type methods initcall init_sr+0x0/0x49 returned 0 after 3 msecs calling ahci_init+0x0/0x1b initcall ahci_init+0x0/0x1b returned 0 after 0 msecs calling piix_init+0x0/0x29 initcall piix_init+0x0/0x29 returned 0 after 0 msecs calling pdc_ata_init+0x0/0x1b initcall pdc_ata_init+0x0/0x1b returned 0 after 0 msecs calling qs_ata_init+0x0/0x1b initcall qs_ata_init+0x0/0x1b returned 0 after 0 msecs calling sil24_init+0x0/0x1b initcall sil24_init+0x0/0x1b returned 0 after 0 msecs calling pdc_sata_init+0x0/0x1b initcall pdc_sata_init+0x0/0x1b returned 0 after 0 msecs calling nv_init+0x0/0x1b initcall nv_init+0x0/0x1b returned 0 after 0 msecs calling mv_init+0x0/0x48 initcall mv_init+0x0/0x48 returned 0 after 0 msecs calling inic_init+0x0/0x1b initcall inic_init+0x0/0x1b returned 0 after 0 msecs calling ali_init+0x0/0x1b initcall ali_init+0x0/0x1b returned 0 after 0 msecs calling amd_init+0x0/0x1b pata_amd 0000:00:06.0: version 0.3.10 pata_amd 0000:00:06.0: setting latency timer to 64 scsi0 : pata_amd PM: Adding info for No Bus:host0 PM: Adding info for No Bus:host0 scsi1 : pata_amd PM: Adding info for No Bus:host1 PM: Adding info for No Bus:host1 ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100 ata1.00: 488397168 sectors, multi 1: LBA48 ata1: nv_mode_filter: 0x3f39f&0x3f07f->0x3f01f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0 ata1.00: configured for UDMA/100 ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66 ata2: nv_mode_filter: 0x1f39f&0x707f->0x701f, BIOS=0x7000 (0xc60000c0) ACPI=0x0 ata2.01: configured for UDMA/33 isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5 PM: Adding info for No Bus:target0:0:0 PM: Adding info for scsi:0:0:0:0 PM: Adding info for No Bus:0:0:0:0 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA PM: Adding info for No Bus:sda sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > PM: Adding info for No Bus:sda1 PM: Adding info for No Bus:sda2 PM: Adding info for No Bus:sda3 PM: Adding info for No Bus:sda5 PM: Adding info for No Bus:sda6 PM: Adding info for No Bus:sda7 PM: Adding info for No Bus:sda8 PM: Adding info for No Bus:sda9 PM: Adding info for No Bus:sda10 PM: Adding info for No Bus:8:0 sd 0:0:0:0: [sda] Attached SCSI disk PM: Adding info for No Bus:0:0:0:0 PM: Adding info for No Bus:0:0:0:0 scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5 PM: Adding info for No Bus:target1:0:1 PM: Adding info for scsi:1:0:1:0 sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 PM: Adding info for No Bus:sr0 PM: Adding info for No Bus:11:0 sr 1:0:1:0: Attached scsi CD-ROM sr0 PM: Adding info for No Bus:1:0:1:0 PM: Adding info for No Bus:1:0:1:0 initcall amd_init+0x0/0x1b returned 0 after 656 msecs calling cs5520_init+0x0/0x1b initcall cs5520_init+0x0/0x1b returned 0 after 0 msecs calling hpt3x3_init+0x0/0x1b initcall hpt3x3_init+0x0/0x1b returned 0 after 0 msecs calling netcell_init+0x0/0x1b initcall netcell_init+0x0/0x1b returned 0 after 0 msecs calling mpiix_init+0x0/0x1b initcall mpiix_init+0x0/0x1b returned 0 after 0 msecs calling oldpiix_init+0x0/0x1b initcall oldpiix_init+0x0/0x1b returned 0 after 0 msecs calling via_init+0x0/0x1b initcall via_init+0x0/0x1b returned 0 after 0 msecs calling sl82c105_init+0x0/0x1b initcall sl82c105_init+0x0/0x1b returned 0 after 0 msecs calling pata_platform_init+0x0/0x12 initcall pata_platform_init+0x0/0x12 returned 0 after 0 msecs calling fusion_init+0x0/0xf8 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation initcall fusion_init+0x0/0xf8 returned 0 after 3 msecs calling mptspi_init+0x0/0xde Fusion MPT SPI Host driver 3.04.07 initcall mptspi_init+0x0/0xde returned 0 after 3 msecs calling ieee1394_init+0x0/0x26c initcall ieee1394_init+0x0/0x26c returned 0 after 0 msecs calling pcilynx_init+0x0/0x3c initcall pcilynx_init+0x0/0x3c returned 0 after 0 msecs calling init_raw1394+0x0/0xf4 PM: Adding info for No Bus:raw1394 ieee1394: raw1394: /dev/raw1394 device initialized initcall init_raw1394+0x0/0xf4 returned 0 after 7 msecs calling cdrom_init+0x0/0x8 initcall cdrom_init+0x0/0x8 returned 0 after 0 msecs calling at25_init+0x0/0x12 initcall at25_init+0x0/0x12 returned 0 after 0 msecs calling tle62x0_init+0x0/0x12 initcall tle62x0_init+0x0/0x12 returned 0 after 0 msecs calling aoe_init+0x0/0xa7 PM: Adding info for No Bus:err PM: Adding info for No Bus:discover PM: Adding info for No Bus:interfaces PM: Adding info for No Bus:revalidate PM: Adding info for No Bus:flush aoe: AoE v47 initialised. initcall aoe_init+0x0/0xa7 returned 0 after 19 msecs calling isp116x_init+0x0/0x3e 116x: driver isp116x-hcd, 03 Nov 2005 initcall isp116x_init+0x0/0x3e returned 0 after 3 msecs calling sl811h_init+0x0/0x3e sl811: driver sl811-hcd, 19 May 2005 initcall sl811h_init+0x0/0x3e returned 0 after 0 msecs calling u132_hcd_init+0x0/0xa8 driver u132_hcd built at 23:10:19 on Aug 15 2008 initcall u132_hcd_init+0x0/0xa8 returned 0 after 3 msecs calling r8a66597_init+0x0/0x3e r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008 initcall r8a66597_init+0x0/0x3e returned 0 after 3 msecs calling c67x00_init+0x0/0x12 initcall c67x00_init+0x0/0x12 returned 0 after 0 msecs calling usb_stor_init+0x0/0x50 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. initcall usb_stor_init+0x0/0x50 returned 0 after 11 msecs calling usb_usual_init+0x0/0x3e usbcore: registered new interface driver libusual initcall usb_usual_init+0x0/0x3e returned 0 after 3 msecs calling usb_serial_init+0x0/0x235 usbcore: registered new interface driver usbserial usbserial: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core initcall usb_serial_init+0x0/0x235 returned 0 after 11 msecs calling ch341_init+0x0/0x48 usbserial: USB Serial support registered for ch341-uart usbcore: registered new interface driver ch341 initcall ch341_init+0x0/0x48 returned 0 after 7 msecs calling cyberjack_init+0x0/0x66 usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader usbcore: registered new interface driver cyberjack cyberjack: v1.01 Matthias Bruestle cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver initcall cyberjack_init+0x0/0x66 returned 0 after 15 msecs calling debug_init+0x0/0x48 usbserial: USB Serial support registered for debug usbcore: registered new interface driver debug initcall debug_init+0x0/0x48 returned 0 after 7 msecs calling digi_init+0x0/0x76 usbserial: USB Serial support registered for Digi 2 port USB adapter usbserial: USB Serial support registered for Digi 4 port USB adapter usbcore: registered new interface driver digi_acceleport digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver initcall digi_init+0x0/0x76 returned 0 after 15 msecs calling edgeport_init+0x0/0xc1 usbserial: USB Serial support registered for Edgeport 2 port adapter usbserial: USB Serial support registered for Edgeport 4 port adapter usbserial: USB Serial support registered for Edgeport 8 port adapter usbserial: USB Serial support registered for EPiC device usbcore: registered new interface driver io_edgeport io_edgeport: Edgeport USB Serial Driver v2.7 initcall edgeport_init+0x0/0xc1 returned 0 after 22 msecs calling usb_ipw_init+0x0/0x5d usbserial: USB Serial support registered for IPWireless converter usbcore: registered new interface driver ipwtty ipw: IPWireless tty driver v0.3 initcall usb_ipw_init+0x0/0x5d returned 0 after 7 msecs calling ir_init+0x0/0x58 usbserial: USB Serial support registered for IR Dongle usbcore: registered new interface driver ir-usb ir_usb: USB IR Dongle driver v0.4 initcall ir_init+0x0/0x58 returned 0 after 11 msecs calling mct_u232_init+0x0/0x58 usbserial: USB Serial support registered for MCT U232 usbcore: registered new interface driver mct_u232 mct_u232: Magic Control Technology USB-RS232 converter driver z2.1 initcall mct_u232_init+0x0/0x58 returned 0 after 11 msecs calling moto_init+0x0/0x48 usbserial: USB Serial support registered for moto-modem usbcore: registered new interface driver moto-modem initcall moto_init+0x0/0x48 returned 0 after 7 msecs calling omninet_init+0x0/0x58 usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb usbcore: registered new interface driver omninet omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver initcall omninet_init+0x0/0x58 returned 0 after 11 msecs calling option_init+0x0/0x58 usbserial: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option option: USB Driver for GSM modems: v0.7.2 initcall option_init+0x0/0x58 returned 0 after 11 msecs calling spcp8x5_init+0x0/0x58 usbserial: USB Serial support registered for SPCP8x5 usbcore: registered new interface driver spcp8x5 spcp8x5: SPCP8x5 USB to serial adaptor driver v0.04 initcall spcp8x5_init+0x0/0x58 returned 0 after 11 msecs calling whiteheat_init+0x0/0x77 usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) usbserial: USB Serial support registered for Connect Tech - WhiteHEAT usbcore: registered new interface driver whiteheat whiteheat: USB ConnectTech WhiteHEAT driver v2.0 initcall whiteheat_init+0x0/0x77 returned 0 after 15 msecs calling keyspan_pda_init+0x0/0x94 usbserial: USB Serial support registered for Keyspan PDA usbserial: USB Serial support registered for Keyspan PDA - (prerenumeration) usbserial: USB Serial support registered for Xircom / Entregra PGS - (prerenumeration) usbcore: registered new interface driver keyspan_pda keyspan_pda: USB Keyspan PDA Converter driver v1.1 initcall keyspan_pda_init+0x0/0x94 returned 0 after 19 msecs calling berry_init+0x0/0x1b usbcore: registered new interface driver berry_charge initcall berry_init+0x0/0x1b returned 0 after 3 msecs calling cypress_init+0x0/0x3a usbcore: registered new interface driver cypress_cy7c63 initcall cypress_init+0x0/0x3a returned 0 after 3 msecs calling ftdi_elan_init+0x0/0x159 driver ftdi-elan built at 23:10:27 on Aug 15 2008 usbcore: registered new interface driver ftdi-elan initcall ftdi_elan_init+0x0/0x159 returned 0 after 7 msecs calling usb_lcd_init+0x0/0x3a usbcore: registered new interface driver usblcd initcall usb_lcd_init+0x0/0x3a returned 0 after 3 msecs calling tv_init+0x0/0x4a usbcore: registered new interface driver trancevibrator trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver initcall tv_init+0x0/0x4a returned 0 after 7 msecs calling usb_sisusb_init+0x0/0x20 usbcore: registered new interface driver sisusb initcall usb_sisusb_init+0x0/0x20 returned 0 after 3 msecs calling i8042_init+0x0/0xef PM: Adding info for platform:i8042 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 initcall i8042_init+0x0/0xef returned 0 after 11 msecs calling serport_init+0x0/0x34 initcall serport_init+0x0/0x34<7>PM: Adding info for serio:serio0 returned 0 after 0 msecs calling fm801_gp_init+0x0/0x1b PM: Adding info for serio:serio1 initcall fm801_gp_init+0x0/0x1b returned 0 after 3 msecs calling ns558_init+0x0/0x2fa initcall ns558_init+0x0/0x2fa returned -19 after 7 msecs calling mousedev_init+0x0/0x8e PM: Adding info for No Bus:mice PM: Adding info for No Bus:psaux mice: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x8e returned 0 after 7 msecs calling evdev_init+0x0/0x12 initcall evdev_init+0x0/0x12 returned 0 after 0 msecs calling atkbd_init+0x0/0x27 initcall atkbd_init+0x0/0x27 returned 0 after 0 msecs calling adi_init+0x0/0x16 initcall adi_init+0x0/0x16 returned 0 after 0 msecs calling analog_init+0x0/0xf1 initcall analog_init+0x0/0xf1 returned 0 after 0 msecs calling interact_init+0x0/0x16 initcall interact_init+0x0/0x16 returned 0 after 0 msecs calling spaceball_init+0x0/0x1b PM: Adding info for No Bus:input0 input: AT Translated Set 2 keyboard as /class/input/input0 PM: Adding info for No Bus:event0 initcall spaceball_init+0x0/0x1b returned 0 after 41 msecs calling stinger_init+0x0/0x1b initcall stinger_init+0x0/0x1b returned 0 after 0 msecs calling tmdc_init+0x0/0x16 initcall tmdc_init+0x0/0x16 returned 0 after 0 msecs calling zhenhua_init+0x0/0x1b initcall zhenhua_init+0x0/0x1b returned 0 after 0 msecs calling usb_acecad_init+0x0/0x38 usbcore: registered new interface driver usb_acecad acecad: v3.2:USB Acecad Flair tablet driver initcall usb_acecad_init+0x0/0x38 returned 0 after 7 msecs calling gtco_init+0x0/0x51 usbcore: registered new interface driver gtco GTCO usb driver version: 2.00.0006initcall gtco_init+0x0/0x51 returned 0 after 7 msecs calling wacom_init+0x0/0x44 usbcore: registered new interface driver wacom wacom: v1.48:USB Wacom Graphire and Wacom Intuos tablet driver initcall wacom_init+0x0/0x44 returned 0 after 7 msecs calling tr_init+0x0/0x1b initcall tr_init+0x0/0x1b returned 0 after 0 msecs calling ali1563_init+0x0/0x1b initcall ali1563_init+0x0/0x1b returned 0 after 0 msecs calling i2c_ali15x3_init+0x0/0x1b initcall i2c_ali15x3_init+0x0/0x1b returned 0 after 0 msecs calling amd756_init+0x0/0x1b initcall amd756_init+0x0/0x1b returned 0 after 0 msecs calling i2c_amd8111_init+0x0/0x1b initcall i2c_amd8111_init+0x0/0x1b returned 0 after 0 msecs calling nforce2_init+0x0/0x1b PM: Adding info for No Bus:i2c-0 i2c-adapter i2c-0: adapter [SMBus nForce2 adapter at 4c00] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x6a i2c-adapter i2c-0: Transaction failed (0x10)! i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x6b i2c-adapter i2c-0: Transaction failed (0x10)! i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2a i2c-adapter i2c-0: Transaction failed (0x10)! i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2b i2c-adapter i2c-0: Transaction failed (0x10)! i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x5c i2c-adapter i2c-0: Transaction failed (0x10)! i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x5d i2c-adapter i2c-0: Transaction failed (0x10)! i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 PM: Adding info for No Bus:i2c-1 i2c-adapter i2c-1: adapter [SMBus nForce2 adapter at 4c40] registered i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x6a i2c-adapter i2c-1: Transaction failed (0x10)! i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x6b i2c-adapter i2c-1: Transaction failed (0x10)! i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2a i2c-adapter i2c-1: Transaction failed (0x10)! i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x2b i2c-adapter i2c-1: Transaction failed (0x10)! i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x5c i2c-adapter i2c-1: Transaction failed (0x10)! i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x5d i2c-adapter i2c-1: Transaction failed (0x10)! i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 initcall nforce2_init+0x0/0x1b returned 0 after 247 msecs calling i2c_piix4_init+0x0/0x1b initcall i2c_piix4_init+0x0/0x1b returned 0 after 0 msecs calling i2c_vt596_init+0x0/0x1b initcall i2c_vt596_init+0x0/0x1b returned 0 after 0 msecs calling i2c_adap_simtec_init+0x0/0x12 initcall i2c_adap_simtec_init+0x0/0x12 returned 0 after 0 msecs calling i2c_pca_pf_init+0x0/0x12 initcall i2c_pca_pf_init+0x0/0x12 returned 0 after 0 msecs calling ds1682_init+0x0/0x14 i2c-core: driver [ds1682] registered initcall ds1682_init+0x0/0x14 returned 0 after 3 msecs calling pcf8574_init+0x0/0x14 i2c-core: driver [pcf8574] registered initcall pcf8574_init+0x0/0x14 returned 0 after 3 msecs calling isdn_init+0x0/0x2fd ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 initcall isdn_init+0x0/0x2fd returned 0 after 7 msecs calling divert_init+0x0/0x64 dss1_divert module successfully installed initcall divert_init+0x0/0x64 returned 0 after 3 msecs calling gigaset_init_module+0x0/0x37 gigaset: Hansjoerg Lipp , Tilman Schmidt , Stefan Eilers gigaset: Driver for Gigaset 307x initcall gigaset_init_module+0x0/0x37 returned 0 after 7 msecs calling bas_gigaset_init+0x0/0xa5 usbcore: registered new interface driver bas_gigaset bas_gigaset: Tilman Schmidt , Hansjoerg Lipp , Stefan Eilers bas_gigaset: USB Driver for Gigaset 307x initcall bas_gigaset_init+0x0/0xa5 returned 0 after 11 msecs calling cpufreq_stats_init+0x0/0x89 initcall cpufreq_stats_init+0x0/0x89 returned 0 after 0 msecs calling cpufreq_gov_userspace_init+0x0/0x12 initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 msecs calling cpufreq_gov_dbs_init+0x0/0x12 initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 0 msecs calling init_ladder+0x0/0x12 cpuidle: using governor ladder initcall init_ladder+0x0/0x12 returned 0 after 3 msecs calling gpio_led_init+0x0/0x12 initcall gpio_led_init+0x0/0x12 returned 0 after 0 msecs calling heartbeat_trig_init+0x0/0x12 initcall heartbeat_trig_init+0x0/0x12 returned 0 after 0 msecs calling hid_init+0x0/0xb initcall hid_init+0x0/0xb returned 0 after 0 msecs calling hid_init+0x0/0x62 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver initcall hid_init+0x0/0x62 returned 0 after 11 msecs calling usb_mouse_init+0x0/0x38 usbcore: registered new interface driver usbmouse usbmouse: v1.6:USB HID Boot Protocol mouse driver initcall usb_mouse_init+0x0/0x38 returned 0 after 7 msecs calling virtio_pci_init+0x0/0x48 PM: Adding info for No Bus:virtio-pci initcall virtio_pci_init+0x0/0x48 returned 0 after 3 msecs calling init+0x0/0x12 initcall init+0x0/0x12 returned 0 after 0 msecs calling init_soundcore+0x0/0x60 initcall init_soundcore+0x0/0x60 returned 0 after 0 msecs calling alsa_sound_init+0x0/0x93 Advanced Linux Sound Architecture Driver Version 1.0.17. initcall alsa_sound_init+0x0/0x93 returned 0 after 3 msecs calling alsa_sound_last_init+0x0/0x61 ALSA device list: No soundcards found. initcall alsa_sound_last_init+0x0/0x61 returned 0 after 3 msecs calling flow_cache_init+0x0/0x1b8 initcall flow_cache_init+0x0/0x1b8 returned 0 after 0 msecs calling pg_init+0x0/0x304 pktgen v2.70: Packet Generator for packet performance testing. initcall pg_init+0x0/0x304 returned 0 after 3 msecs calling llc_init+0x0/0x20 initcall llc_init+0x0/0x20 returned 0 after 0 msecs calling llc2_init+0x0/0xaa NET: Registered protocol family 26 initcall llc2_init+0x0/0xaa returned 0 after 7 msecs calling snap_init+0x0/0x31 initcall snap_init+0x0/0x31 returned 0 after 0 msecs calling rif_init+0x0/0x70 initcall rif_init+0x0/0x70 returned 0 after 0 msecs calling blackhole_module_init+0x0/0x12 initcall blackhole_module_init+0x0/0x12 returned 0 after 0 msecs calling mirred_init_module+0x0/0x20 Mirror/redirect action on initcall mirred_init_module+0x0/0x20 returned 0 after 3 msecs calling cbq_module_init+0x0/0x12 initcall cbq_module_init+0x0/0x12 returned 0 after 0 msecs calling red_module_init+0x0/0x12 initcall red_module_init+0x0/0x12 returned 0 after 0 msecs calling ingress_module_init+0x0/0x12 initcall ingress_module_init+0x0/0x12 returned 0 after 0 msecs calling tbf_module_init+0x0/0x12 initcall tbf_module_init+0x0/0x12 returned 0 after 0 msecs calling init_route4+0x0/0x12 initcall init_route4+0x0/0x12 returned 0 after 0 msecs calling init_fw+0x0/0x12 initcall init_fw+0x0/0x12 returned 0 after 0 msecs calling init_rsvp+0x0/0x12 initcall init_rsvp+0x0/0x12 returned 0 after 0 msecs calling init_rsvp+0x0/0x12 initcall init_rsvp+0x0/0x12 returned 0 after 0 msecs calling cls_flow_init+0x0/0x12 initcall cls_flow_init+0x0/0x12 returned 0 after 0 msecs calling nfnetlink_init+0x0/0x5d Netfilter messages via NETLINK v0.30. initcall nfnetlink_init+0x0/0x5d returned 0 after 3 msecs calling nfnetlink_queue_init+0x0/0xa2 initcall nfnetlink_queue_init+0x0/0xa2 returned 0 after 0 msecs calling nf_conntrack_standalone_init+0x0/0x7d nf_conntrack version 0.5.0 (8192 buckets, 32768 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. initcall nf_conntrack_standalone_init+0x0/0x7d returned 0 after 15 msecs calling nf_ct_proto_gre_init+0x0/0x12 initcall nf_ct_proto_gre_init+0x0/0x12 returned 0 after 0 msecs calling nf_conntrack_proto_udplite_init+0x0/0x43 initcall nf_conntrack_proto_udplite_init+0x0/0x43 returned 0 after 0 msecs calling nf_conntrack_amanda_init+0x0/0xa6 initcall nf_conntrack_amanda_init+0x0/0xa6 returned 0 after 0 msecs calling nf_conntrack_ftp_init+0x0/0x1a0 initcall nf_conntrack_ftp_init+0x0/0x1a0 returned 0 after 0 msecs calling nf_conntrack_pptp_init+0x0/0x12 initcall nf_conntrack_pptp_init+0x0/0x12 returned 0 after 0 msecs calling nf_conntrack_sip_init+0x0/0x18c initcall nf_conntrack_sip_init+0x0/0x18c returned 0 after 0 msecs calling xt_init+0x0/0xca initcall xt_init+0x0/0xca returned 0 after 0 msecs calling tcpudp_mt_init+0x0/0x17 initcall tcpudp_mt_init+0x0/0x17 returned 0 after 0 msecs calling classify_tg_init+0x0/0x17 initcall classify_tg_init+0x0/0x17 returned 0 after 0 msecs calling nflog_tg_init+0x0/0x17 initcall nflog_tg_init+0x0/0x17 returned 0 after 0 msecs calling connmark_mt_init+0x0/0x17 initcall connmark_mt_init+0x0/0x17 returned 0 after 0 msecs calling dscp_mt_init+0x0/0x17 initcall dscp_mt_init+0x0/0x17 returned 0 after 0 msecs calling length_mt_init+0x0/0x17 initcall length_mt_init+0x0/0x17 returned 0 after 0 msecs calling limit_mt_init+0x0/0x17 initcall limit_mt_init+0x0/0x17 returned 0 after 0 msecs calling policy_mt_init+0x0/0x17 initcall policy_mt_init+0x0/0x17 returned 0 after 0 msecs calling quota_mt_init+0x0/0x17 initcall quota_mt_init+0x0/0x17 returned 0 after 0 msecs calling sctp_mt_init+0x0/0x17 initcall sctp_mt_init+0x0/0x17 returned 0 after 0 msecs calling statistic_mt_init+0x0/0x17 initcall statistic_mt_init+0x0/0x17 returned 0 after 0 msecs calling string_mt_init+0x0/0x17 initcall string_mt_init+0x0/0x17 returned 0 after 0 msecs calling tcpmss_mt_init+0x0/0x17 initcall tcpmss_mt_init+0x0/0x17 returned 0 after 0 msecs calling time_mt_init+0x0/0x17 initcall time_mt_init+0x0/0x17 returned 0 after 0 msecs calling ipgre_init+0x0/0x71 GRE over IPv4 tunneling driver PM: Adding info for No Bus:gre0 initcall ipgre_init+0x0/0x71 returned 0 after 3 msecs calling esp4_init+0x0/0x68 initcall esp4_init+0x0/0x68 returned 0 after 0 msecs calling ipv4_netfilter_init+0x0/0x17 initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 0 msecs calling ip_queue_init+0x0/0x114 initcall ip_queue_init+0x0/0x114 returned 0 after 0 msecs calling inet_diag_init+0x0/0x69 initcall inet_diag_init+0x0/0x69 returned 0 after 0 msecs calling tcp_diag_init+0x0/0x12 initcall tcp_diag_init+0x0/0x12 returned 0 after 0 msecs calling bictcp_register+0x0/0x12 TCP bic registered initcall bictcp_register+0x0/0x12 returned 0 after 3 msecs calling tcp_westwood_register+0x0/0x12 TCP westwood registered initcall tcp_westwood_register+0x0/0x12 returned 0 after 0 msecs calling hybla_register+0x0/0x12 TCP hybla registered initcall hybla_register+0x0/0x12 returned 0 after 0 msecs calling tcp_vegas_register+0x0/0x14 TCP vegas registered initcall tcp_vegas_register+0x0/0x14 returned 0 after 3 msecs calling tcp_scalable_register+0x0/0x12 TCP scalable registered initcall tcp_scalable_register+0x0/0x12 returned 0 after 3 msecs calling packet_init+0x0/0x47 NET: Registered protocol family 17 initcall packet_init+0x0/0x47 returned 0 after 0 msecs calling atalk_init+0x0/0x88 NET: Registered protocol family 5 initcall atalk_init+0x0/0x88 returned 0 after 30 msecs calling x25_init+0x0/0x5a NET: Registered protocol family 9 X.25 for Linux Version 0.2 initcall x25_init+0x0/0x5a returned 0 after 7 msecs calling lapb_init+0x0/0x8 initcall lapb_init+0x0/0x8 returned 0 after 0 msecs calling vlan_proto_init+0x0/0xc7 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller initcall vlan_proto_init+0x0/0xc7 returned 0 after 7 msecs calling powernowk8_init+0x0/0xd9 powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. initcall powernowk8_init+0x0/0xd9 returned -19 after 15 msecs calling update_mp_table+0x0/0x476 initcall update_mp_table+0x0/0x476 returned 0 after 0 msecs calling lapic_insert_resource+0x0/0x40 initcall lapic_insert_resource+0x0/0x40 returned 0 after 0 msecs calling init_lapic_nmi_sysfs+0x0/0x38 initcall init_lapic_nmi_sysfs+0x0/0x38 returned 0 after 0 msecs calling ioapic_insert_resources+0x0/0x4f initcall ioapic_insert_resources+0x0/0x4f returned 0 after 0 msecs calling check_early_ioremap_leak+0x0/0x22 initcall check_early_ioremap_leak+0x0/0x22 returned 0 after 0 msecs calling pat_memtype_list_init+0x0/0x29 initcall pat_memtype_list_init+0x0/0x29 returned 0 after 3 msecs calling sched_init_debug+0x0/0x24 initcall sched_init_debug+0x0/0x24 returned 0 after 0 msecs calling init_oops_id+0x0/0x28 initcall init_oops_id+0x0/0x28 returned 0 after 0 msecs calling disable_boot_consoles+0x0/0x3a initcall disable_boot_consoles+0x0/0x3a returned 0 after 0 msecs calling pm_qos_power_init+0x0/0x61 PM: Adding info for No Bus:cpu_dma_latency PM: Adding info for No Bus:network_latency PM: Adding info for No Bus:network_throughput initcall pm_qos_power_init+0x0/0x61 returned 0 after 11 msecs calling software_resume+0x0/0x1b8 initcall software_resume+0x0/0x1b8 returned -2 after 0 msecs initcall software_resume+0x0/0x1b8 returned with error code -2 calling debugfs_kprobe_init+0x0/0x89 initcall debugfs_kprobe_init+0x0/0x89 returned 0 after 0 msecs calling taskstats_init+0x0/0x95 registered taskstats version 1 initcall taskstats_init+0x0/0x95 returned 0 after 3 msecs calling random32_reseed+0x0/0x9e initcall random32_reseed+0x0/0x9e returned 0 after 0 msecs calling pci_sysfs_init+0x0/0x4c initcall pci_sysfs_init+0x0/0x4c returned 0 after 0 msecs calling seqgen_init+0x0/0xf initcall seqgen_init+0x0/0xf returned 0 after 0 msecs calling late_resume_init+0x0/0xf2 Magic number: 4:982:196 initcall late_resume_init+0x0/0xf2 returned 0 after 0 msecs calling hd_init+0x0/0x2fe hd: no drives specified - use hd=cyl,head,sectors on kernel command line initcall hd_init+0x0/0x2fe returned -1 after 3 msecs initcall hd_init+0x0/0x2fe returned with error code -1 calling scsi_complete_async_scans+0x0/0x129 initcall scsi_complete_async_scans+0x0/0x129 returned 0 after 0 msecs calling memmap_init+0x0/0x90 initcall memmap_init+0x0/0x90 returned 0 after 0 msecs calling tcp_congestion_default+0x0/0x12 initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 msecs calling ip_auto_config+0x0/0xce7 initcall ip_auto_config+0x0/0xce7 returned 0 after 0 msecs EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 1128k freed PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 udev: renamed network interface eth0 to eth1 udev: renamed network interface eth1_rename to eth0 eth0: link down EXT3 FS on sda6, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 3911816k swap on /dev/sda2. Priority:-1 extents:1 across:3911816k PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 warning: `sudo' uses 32-bit capabilities (legacy support in use) PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Removing info for No Bus:vcs4 PM: Removing info for No Bus:vcsa4 PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 PM: Removing info for No Bus:vcs3 PM: Removing info for No Bus:vcsa3 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 PM: Removing info for No Bus:vcs6 PM: Removing info for No Bus:vcsa6 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Removing info for No Bus:vcs2 PM: Removing info for No Bus:vcsa2 PM: Removing info for No Bus:vcs5 PM: Removing info for No Bus:vcsa5 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 PM: Removing info for No Bus:vcs7 PM: Removing info for No Bus:vcsa7 eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. PM: Removing info for No Bus:vcs7 PM: Removing info for No Bus:vcsa7 eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. PM: Removing info for No Bus:vcs7 PM: Removing info for No Bus:vcsa7 PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. eth1: too many iterations (6) in nv_nic_irq. ----------------------> 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] 01:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE] 05:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/