Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754554AbYHTGps (ORCPT ); Wed, 20 Aug 2008 02:45:48 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751912AbYHTGpf (ORCPT ); Wed, 20 Aug 2008 02:45:35 -0400 Received: from mx2.mail.elte.hu ([157.181.151.9]:52368 "EHLO mx2.mail.elte.hu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751718AbYHTGpX (ORCPT ); Wed, 20 Aug 2008 02:45:23 -0400 Date: Wed, 20 Aug 2008 08:44:37 +0200 From: Ingo Molnar To: Dmitry Torokhov Cc: Paul Jackson , linux-kernel@vger.kernel.org, menage@google.com, a.p.zijlstra@chello.nl, vegard.nossum@gmail.com, "Rafael J. Wysocki" , Max Krasnyansky Subject: [input layer, lockdep warning] Re: [PATCH] cpuset: Rework sched domains and CPU hotplug handling (take 4) Message-ID: <20080820064437.GA14208@elte.hu> References: <1218490433-10576-1-git-send-email-maxk@qualcomm.com> <20080811183122.acd25489.pj@sgi.com> <20080814092424.GB18771@elte.hu> <20080814111633.GA2614@elte.hu> <48A477B8.9090704@qualcomm.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <48A477B8.9090704@qualcomm.com> User-Agent: Mutt/1.5.18 (2008-05-17) X-ELTE-VirusStatus: clean X-ELTE-SpamScore: -1.5 X-ELTE-SpamLevel: X-ELTE-SpamCheck: no X-ELTE-SpamVersion: ELTE 2.0 X-ELTE-SpamCheck-Details: score=-1.5 required=5.9 tests=BAYES_00 autolearn=no SpamAssassin version=3.2.3 -1.5 BAYES_00 BODY: Bayesian spam probability is 0 to 1% [score: 0.0000] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 104955 Lines: 2184 Dmitry, this lockdep warning triggered again in -tip testing: > > [ 59.750200] ======================================================= > > [ 59.750200] [ INFO: possible circular locking dependency detected ] > > [ 59.750200] 2.6.27-rc3-tip-00076-g75f9a29-dirty #1 > > [ 59.750200] ------------------------------------------------------- > > [ 59.750200] Xorg/6623 is trying to acquire lock: > > [ 59.750200] (cpu_add_remove_lock){--..}, at: [] cpu_maps_update_begin+0x14/0x16 > > [ 59.750200] > > [ 59.750200] but task is already holding lock: > > [ 59.750200] (polldev_mutex){--..}, at: [] input_close_polled_device+0x22/0x47 > > [ 59.750200] > > [ 59.750200] which lock already depends on the new lock. See the bootlog below. Upstream base of the tree below is 1fca254274823876. The first warnings came with b635acec48. Ingo ------------------> Initializing cgroup subsys cpuset Linux version 2.6.27-rc3-tip-00607-g3c311a4-dirty (mingo@europe) (gcc version 4.2.2) #1 SMP Mon Aug 18 21:31:41 CEST 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable) BIOS-e820: 000000007f6e0000 - 000000007f6f3000 (ACPI data) BIOS-e820: 000000007f6f3000 - 000000007f700000 (ACPI NVS) BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) last_pfn = 0x7f6e0 max_arch_pfn = 0x100000 kernel direct mapping tables up to 38000000 @ 7000-c000 DMI present. ACPI: RSDP 000F68A0, 0024 (r2 LENOVO) ACPI: XSDT 7F6E631F, 0074 (r1 LENOVO TP-79 1020 LTP 0) ACPI: FACP 7F6E6400, 00F4 (r3 LENOVO TP-79 1020 LNVO 1) ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080609] ACPI: DSDT 7F6E65E7, C765 (r1 LENOVO TP-79 1020 MSFT 100000E) ACPI: FACS 7F6F4000, 0040 ACPI: SSDT 7F6E65B4, 0033 (r1 LENOVO TP-79 1020 MSFT 100000E) ACPI: ECDT 7F6F2D4C, 0052 (r1 LENOVO TP-79 1020 LNVO 1) ACPI: TCPA 7F6F2D9E, 0032 (r2 LENOVO TP-79 1020 LNVO 1) ACPI: APIC 7F6F2DD0, 0068 (r1 LENOVO TP-79 1020 LNVO 1) ACPI: MCFG 7F6F2E38, 003E (r1 LENOVO TP-79 1020 LNVO 1) ACPI: HPET 7F6F2E76, 0038 (r1 LENOVO TP-79 1020 LNVO 1) ACPI: BOOT 7F6F2FD8, 0028 (r1 LENOVO TP-79 1020 LTP 1) ACPI: SSDT 7F6E58DA, 0507 (r1 LENOVO TP-79 1020 INTL 20050513) ACPI: SSDT 7F6E5702, 01D8 (r1 LENOVO TP-79 1020 INTL 20050513) 1142MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00008000 - 0000f000 (8 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0001590cdc] TEXT DATA BSS ==> [0000100000 - 0001590cdc] #4 [0001591000 - 0001598000] INIT_PG_TABLE ==> [0001591000 - 0001598000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f68e0] 000f68e0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x0007f6e0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007f6e0 On node 0 totalpages: 521855 free_area_init_node: node 0, pgdat c0e50f00, node_mem_map c1598000 DMA zone: 3943 pages, LIFO batch:0 Normal zone: 222200 pages, LIFO batch:31 HighMem zone: 288575 pages, LIFO batch:31 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) dyn_array irq_2_pin_head+0x0/0xc size:0xc nr:256 align:0x1000 dyn_array irq_cfgx+0x0/0x4 size:0x1c nr:32 align:0x1000 dyn_array irq_descX+0x0/0x4 size:0x80 nr:32 align:0x1000 dyn_array total_size: 0x3000 dyn_array irq_2_pin_head+0x0/0xc ==> [0x3198000 - 0x3198c00] dyn_array irq_cfgx+0x0/0x4 ==> [0x3199000 - 0x3199380] dyn_array irq_descX+0x0/0x4 ==> [0x319a000 - 0x319b000] kstat_irqs ==> [0x319b000 - 0x319b100] PERCPU: Allocating 36864 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514718 Kernel command line: Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 found new irq_desc for irq 0 found new irq_desc for irq 1 found new irq_desc for irq 2 found new irq_desc for irq 3 found new irq_desc for irq 4 found new irq_desc for irq 5 found new irq_desc for irq 6 found new irq_desc for irq 7 found new irq_desc for irq 8 found new irq_desc for irq 9 found new irq_desc for irq 10 found new irq_desc for irq 11 found new irq_desc for irq 12 found new irq_desc for irq 13 found new irq_desc for irq 14 found new irq_desc for irq 15 CPU 0 irqstacks, hard=c0fc6000 soft=c0fbe000 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 TSC calibrated against PIT Detected 1596.586 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 2335 kB per task-struct memory footprint: 1152 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | double unlock: ok | ok | ok | ok | ok | ok | initialize held: ok | ok | ok | ok | ok | ok | bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | | ok | recursive read-lock #2: | ok | | ok | mixed read-write-lock: | ok | | ok | mixed write-read-lock: | ok | | ok | -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A => hirqs-on/12: ok | ok | ok | sirq-safe-A => hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | ------------------------------------------------------- Good, all 218 testcases passed! | --------------------------------- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2035704k/2087808k available (9635k kernel code, 50736k reserved, 4837k data, 568k init, 1170304k highmem) virtual kernel memory layout: fixmap : 0xffee0000 - 0xfffff000 (1148 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0f2d000 - 0xc0fbb000 ( 568 kB) .data : 0xc0a68c57 - 0xc0f22078 (4837 kB) .text : 0xc0100000 - 0xc0a68c57 (9635 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.17 BogoMIPS (lpj=6386344) Security Framework initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 Parsing all Control Methods: Table [DSDT](id 0001) - 1587 Objects with 76 Devices 433 Methods 26 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 1 Objects with 0 Devices 1 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0003) - 14 Objects with 0 Devices 5 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0004) - 14 Objects with 1 Devices 2 Methods 0 Regions tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful 0 add_pin_to_irq: irq 1 --> apic 0 pin 1 0 add_pin_to_irq: irq 0 --> apic 0 pin 2 0 add_pin_to_irq: irq 3 --> apic 0 pin 3 0 add_pin_to_irq: irq 4 --> apic 0 pin 4 0 add_pin_to_irq: irq 5 --> apic 0 pin 5 0 add_pin_to_irq: irq 6 --> apic 0 pin 6 0 add_pin_to_irq: irq 7 --> apic 0 pin 7 0 add_pin_to_irq: irq 8 --> apic 0 pin 8 0 add_pin_to_irq: irq 9 --> apic 0 pin 9 0 add_pin_to_irq: irq 10 --> apic 0 pin 10 0 add_pin_to_irq: irq 11 --> apic 0 pin 11 0 add_pin_to_irq: irq 12 --> apic 0 pin 12 0 add_pin_to_irq: irq 13 --> apic 0 pin 13 0 add_pin_to_irq: irq 14 --> apic 0 pin 14 0 add_pin_to_irq: irq 15 --> apic 0 pin 15 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 lockdep: fixing up alternatives. CPU 1 irqstacks, hard=c0fc7000 soft=c0fbf000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3657.46 BogoMIPS (lpj=7314927) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 checking TSC synchronization [CPU#0 -> CPU#1]: Measured 580096 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (6850.63 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 net_namespace: 568 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: ACPI Dock Station Driver ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 ACPI: EC: EC description table is found, configuring boot EC Completing Region/Field/Buffer/Package initialization:......................................................................................................................................................................................................................................................................................... Initialized 26/26 Regions 142/142 Fields 64/64 Buffers 49/49 Packages (1625 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:...<6>ACPI: EC: non-query interrupt received, switching to interrupt mode .... Executed 7 _INI methods requiring 2 _STA executions (examined 83 objects) evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 2 Runtime GPEs in this block ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Scanning bus 0000:00 pci 0000:00:00.0: found [8086/27a0] class 000600 header type 00 pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:02.0: found [8086/27a2] class 000300 header type 00 pci 0000:00:02.0: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:02.1: found [8086/27a6] class 000380 header type 00 pci 0000:00:02.1: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:1b.0: found [8086/27d8] class 000403 header type 00 pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: found [8086/27d0] class 000604 header type 01 pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: found [8086/27d2] class 000604 header type 01 pci 0000:00:1c.1: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: found [8086/27d4] class 000604 header type 01 pci 0000:00:1c.2: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: found [8086/27d6] class 000604 header type 01 pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: found [8086/27c8] class 000c03 header type 00 pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:1d.1: found [8086/27c9] class 000c03 header type 00 pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:1d.2: found [8086/27ca] class 000c03 header type 00 pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:1d.3: found [8086/27cb] class 000c03 header type 00 pci 0000:00:1d.3: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:1d.7: found [8086/27cc] class 000c03 header type 00 pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: found [8086/2448] class 000604 header type 01 pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:1f.0: found [8086/27b9] class 000601 header type 00 pci 0000:00:1f.0: calling ich_force_enable_hpet+0x0/0x16b pci 0000:00:1f.0: calling quirk_ich6_lpc_acpi+0x0/0x6a pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:1f.1: found [8086/27df] class 000101 header type 00 pci 0000:00:1f.1: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:1f.2: found [8086/27c5] class 000106 header type 00 pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: found [8086/27da] class 000c05 header type 00 pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x30 PCI: Fixups for bus 0000:00 pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 0 PCI: Scanning bus 0000:02 pci 0000:02:00.0: found [8086/109a] class 000200 header type 00 pci 0000:02:00.0: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled PCI: Fixups for bus 0000:02 PCI: bridge 0000:00:1c.0 io port: [2fff00002000, f78aaae4f7982000] PCI: bridge 0000:00:1c.0 32bit mmio: [ee0fffffee000000, f78aaae4f7982000] PCI: Bus scan for 0000:02 returning with max=02 pci 0000:00:1c.1: scanning behind bridge, config 030300, pass 0 PCI: Scanning bus 0000:03 pci 0000:03:00.0: found [8086/4227] class 000280 header type 00 pci 0000:03:00.0: calling pci_fixup_transparent_bridge+0x0/0x30 pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled PCI: Fixups for bus 0000:03 PCI: bridge 0000:00:1c.1 io port: [4fff00003000, f78ab2e4f7982400] PCI: bridge 0000:00:1c.1 32bit mmio: [edffffffec000000, f78ab2e4f7982400] PCI: bridge 0000:00:1c.1 64bit mmio pref: [e40fffffe4000000, f78ab2e4f7982400] PCI: Bus scan for 0000:03 returning with max=03 pci 0000:00:1c.2: scanning behind bridge, config 0b0400, pass 0 PCI: Scanning bus 0000:04 PCI: Fixups for bus 0000:04 PCI: bridge 0000:00:1c.2 io port: [6fff00005000, f78abae4f7982800] PCI: bridge 0000:00:1c.2 32bit mmio: [e9ffffffe8000000, f78abae4f7982800] PCI: bridge 0000:00:1c.2 64bit mmio pref: [e41fffffe4100000, f78abae4f7982800] PCI: Bus scan for 0000:04 returning with max=04 pci 0000:00:1c.3: scanning behind bridge, config 130c00, pass 0 PCI: Scanning bus 0000:0c PCI: Fixups for bus 0000:0c PCI: bridge 0000:00:1c.3 io port: [8fff00007000, f78ac2e4f7982c00] PCI: bridge 0000:00:1c.3 32bit mmio: [ebffffffea000000, f78ac2e4f7982c00] PCI: bridge 0000:00:1c.3 64bit mmio pref: [e42fffffe4200000, f78ac2e4f7982c00] PCI: Bus scan for 0000:0c returning with max=0c pci 0000:00:1e.0: scanning behind bridge, config 181500, pass 0 PCI: Scanning bus 0000:15 pci 0000:15:00.0: found [104c/ac56] class 000607 header type 02 pci 0000:15:00.0: supports D1 pci 0000:15:00.0: supports D2 pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.0: PME# disabled PCI: Fixups for bus 0000:15 pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [cfff00009000, f78af2e4f7983000] PCI: bridge 0000:00:1e.0 32bit mmio: [e7ffffffe4300000, f78af2e4f7983000] PCI: bridge 0000:00:1e.0 64bit mmio pref: [e3ffffffe0000000, f78af2e4f7983000] pci 0000:15:00.0: scanning behind bridge, config 181615, pass 0 pci 0000:15:00.0: scanning behind bridge, config 181615, pass 1 PCI: Bus scan for 0000:15 returning with max=17 pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 1 pci 0000:00:1c.1: scanning behind bridge, config 030300, pass 1 pci 0000:00:1c.2: scanning behind bridge, config 0b0400, pass 1 pci 0000:00:1c.3: scanning behind bridge, config 130c00, pass 1 pci 0000:00:1e.0: scanning behind bridge, config 181500, pass 1 PCI: Bus scan for 0000:00 returning with max=18 bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PUBS] (on) ACPI: WMI: Mapper loaded Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: parse allocated resources pnp 00:00: add mem 0x0-0x9ffff flags 0x1 pnp 00:00: add mem 0xc0000-0xc3fff flags 0x0 pnp 00:00: add mem 0xc4000-0xc7fff flags 0x0 pnp 00:00: add mem 0xc8000-0xcbfff flags 0x0 pnp 00:00: add mem 0xcc000-0xcffff flags 0x0 pnp 00:00: add mem 0xd0000-0xd3fff flags 0x0 pnp 00:00: add mem 0xd4000-0xd3fff flags 0x10000000 pnp 00:00: add mem 0xd8000-0xd7fff flags 0x10000000 pnp 00:00: add mem 0xdc000-0xdffff flags 0x1 pnp 00:00: add mem 0xe0000-0xe3fff flags 0x0 pnp 00:00: add mem 0xe4000-0xe7fff flags 0x0 pnp 00:00: add mem 0xe8000-0xebfff flags 0x0 pnp 00:00: add mem 0xec000-0xeffff flags 0x0 pnp 00:00: add mem 0xf0000-0xfffff flags 0x0 pnp 00:00: add mem 0x100000-0x7fffffff flags 0x1 pnp 00:00: add mem 0xfec00000-0xffffffff flags 0x0 pnp 00:00: add mem 0xfed41000-0xfed40fff flags 0x10000000 pnp 00:00: PNP0c01: calling quirk_system_pci_resources+0x0/0x160 pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: parse allocated resources pnp 00:01: add io 0xcf8-0xcff flags 0x1 pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:02: parse allocated resources pnp 00:02: add io 0x10-0x1f flags 0x1 pnp 00:02: add io 0x90-0x9f flags 0x1 pnp 00:02: add io 0x24-0x25 flags 0x1 pnp 00:02: add io 0x28-0x29 flags 0x1 pnp 00:02: add io 0x2c-0x2d flags 0x1 pnp 00:02: add io 0x30-0x31 flags 0x1 pnp 00:02: add io 0x34-0x35 flags 0x1 pnp 00:02: add io 0x38-0x39 flags 0x1 pnp 00:02: add io 0x3c-0x3d flags 0x1 pnp 00:02: add io 0xa4-0xa5 flags 0x1 pnp 00:02: add io 0xa8-0xa9 flags 0x1 pnp 00:02: add io 0xac-0xad flags 0x1 pnp 00:02: add io 0xb0-0xb5 flags 0x1 pnp 00:02: add io 0xb8-0xb9 flags 0x1 pnp 00:02: add io 0xbc-0xbd flags 0x1 pnp 00:02: add io 0x50-0x53 flags 0x1 pnp 00:02: add io 0x72-0x77 flags 0x1 pnp 00:02: add io 0x164e-0x164f flags 0x1 pnp 00:02: add io 0x2e-0x2f flags 0x1 pnp 00:02: add io 0x1000-0x107f flags 0x1 pnp 00:02: add io 0x1180-0x11bf flags 0x1 pnp 00:02: add io 0x800-0x80f flags 0x1 pnp 00:02: add io 0x15e0-0x15ef flags 0x1 pnp 00:02: add io 0x1600-0x165f flags 0x1 pnp 00:02: add mem 0xf0000000-0xf3ffffff flags 0x1 pnp 00:02: add mem 0xfed1c000-0xfed1ffff flags 0x1 pnp 00:02: add mem 0xfed14000-0xfed17fff flags 0x1 pnp 00:02: add mem 0xfed18000-0xfed18fff flags 0x1 pnp 00:02: add mem 0xfed19000-0xfed19fff flags 0x1 pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x160 pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: parse allocated resources pnp 00:03: add mem 0xfed00000-0xfed003ff flags 0x0 pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:04: parse allocated resources pnp 00:04: add io 0x0-0xf flags 0x1 pnp 00:04: add io 0x80-0x8f flags 0x1 pnp 00:04: add io 0xc0-0xdf flags 0x1 pnp 00:04: add dma 4 flags 0x5 pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: parse allocated resources pnp 00:05: add io 0x61-0x61 flags 0x1 pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: parse allocated resources pnp 00:06: add io 0xf0-0xf0 flags 0x1 pnp 00:06: add irq 13 flags 0x1 pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: parse allocated resources pnp 00:07: add io 0x70-0x71 flags 0x1 pnp 00:07: add irq 8 flags 0x1 pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:08: parse allocated resources pnp 00:08: add io 0x60-0x60 flags 0x1 pnp 00:08: add io 0x64-0x64 flags 0x1 pnp 00:08: add irq 1 flags 0x1 pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:09: parse allocated resources pnp 00:09: add irq 12 flags 0x1 pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active) pnp 00:0a: parse allocated resources pnp 00:0a: add io 0x2f8-0x2ff flags 0x1 pnp 00:0a: add irq 3 flags 0x1 pnp 00:0a: add dma 3 flags 0x0 pnp 00:0a: parse resource options pnp 00:0a: dependent set 0 (preferred) io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 0 (preferred) irq 3 flags 0x1 pnp 00:0a: dependent set 0 (preferred) dma 0 1 3 (bitmask 0xb) flags 0x0 pnp 00:0a: dependent set 1 (acceptable) io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 1 (acceptable) irq 4 flags 0x1 pnp 00:0a: dependent set 1 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0 pnp 00:0a: dependent set 2 (acceptable) io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 2 (acceptable) irq 3 flags 0x1 pnp 00:0a: dependent set 2 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0 pnp 00:0a: dependent set 3 (acceptable) io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 3 (acceptable) irq 4 flags 0x1 pnp 00:0a: dependent set 3 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0 pnp 00:0a: dependent set 4 (functional) io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 4 (functional) irq 4 5 7 flags 0x1 pnp 00:0a: dependent set 4 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0 pnp 00:0a: dependent set 5 (functional) io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 5 (functional) irq 3 5 7 flags 0x1 pnp 00:0a: dependent set 5 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0 pnp 00:0a: dependent set 6 (functional) io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 6 (functional) irq 4 5 7 flags 0x1 pnp 00:0a: dependent set 6 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0 pnp 00:0a: dependent set 7 (functional) io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 7 (functional) irq 3 5 7 flags 0x1 pnp 00:0a: dependent set 7 (functional) dma 0 1 3 (bitmask 0xb) flags 0x0 pnp 00:0a: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active) pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb i2c-core: driver [dummy] registered PCI: Using ACPI for IRQ routing Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. irda_init() NET: Registered protocol family 23 Bluetooth: Core ver 2.12 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized NET: Registered protocol family 8 NET: Registered protocol family 20 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter tracer: 211 pages allocated for 16384 entries of 52 bytes actual entries 16458 Switched to high resolution mode on CPU 0 ACPI: RTC can wake from S4 Switched to high resolution mode on CPU 1 pnp: the driver 'system' has been registered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff could not be reserved system 00:00: iomem range 0xc4000-0xc7fff could not be reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff could not be reserved system 00:00: iomem range 0xd0000-0xd3fff could not be reserved system 00:00: iomem range 0xdc000-0xdffff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7fffffff could not be reserved system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved system 00:00: driver attached system 00:02: ioport range 0x164e-0x164f has been reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x800-0x80f has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x165f could not be reserved system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:02: driver attached pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xee000000-0xee0fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x3000-0x4fff pci 0000:00:1c.1: MEM window: 0xec000000-0xedffffff pci 0000:00:1c.1: PREFETCH window: 0x000000e4000000-0x000000e40fffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: 0x5000-0x6fff pci 0000:00:1c.2: MEM window: 0xe8000000-0xe9ffffff pci 0000:00:1c.2: PREFETCH window: 0x000000e4100000-0x000000e41fffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.3: IO window: 0x7000-0x8fff pci 0000:00:1c.3: MEM window: 0xea000000-0xebffffff pci 0000:00:1c.3: PREFETCH window: 0x000000e4200000-0x000000e42fffff pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 pci 0000:15:00.0: IO window: 0x009000-0x0090ff pci 0000:15:00.0: IO window: 0x009400-0x0094ff pci 0000:15:00.0: PREFETCH window: 0xe0000000-0xe3ffffff pci 0000:15:00.0: MEM window: 0x88000000-0x8bffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 pci 0000:00:1e.0: IO window: 0x9000-0xcfff pci 0000:00:1e.0: MEM window: 0xe4300000-0xe7ffffff pci 0000:00:1e.0: PREFETCH window: 0x000000e0000000-0x000000e3ffffff found new irq_cfg for irq 20 0 add_pin_to_irq: irq 20 --> apic 0 pin 20 found new irq_desc for irq 20 pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.0: setting latency timer to 64 found new irq_cfg for irq 21 0 add_pin_to_irq: irq 21 --> apic 0 pin 21 found new irq_desc for irq 21 pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.1: setting latency timer to 64 found new irq_cfg for irq 22 0 add_pin_to_irq: irq 22 --> apic 0 pin 22 found new irq_desc for irq 22 pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:1c.2: setting latency timer to 64 found new irq_cfg for irq 23 0 add_pin_to_irq: irq 23 --> apic 0 pin 23 found new irq_desc for irq 23 pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: enabling device (0005 -> 0007) pci 0000:00:1e.0: setting latency timer to 64 vendor=8086 device=2448 found new irq_cfg for irq 16 0 add_pin_to_irq: irq 16 --> apic 0 pin 16 found new irq_desc for irq 16 pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bus: 00 index 0 io port: [ffff00000000, f7981c00] bus: 00 index 1 mmio: [ffffffff00000000, f7981c00] bus: 02 index 0 io port: [2fff00002000, f7981c14f78aa800] bus: 02 index 1 mmio: [ee0fffffee000000, f7981c14f78aa800] bus: 02 index 2 mmio: [0, f7981c14f78aa800] bus: 02 index 3 mmio: [0, f7981c14f78aa800] bus: 03 index 0 io port: [4fff00003000, f7981c14f78ab000] bus: 03 index 1 mmio: [edffffffec000000, f7981c14f78ab000] bus: 03 index 2 mmio: [e40fffffe4000000, f7981c14f78ab000] bus: 03 index 3 mmio: [0, f7981c14f78ab000] bus: 04 index 0 io port: [6fff00005000, f7981c14f78ab800] bus: 04 index 1 mmio: [e9ffffffe8000000, f7981c14f78ab800] bus: 04 index 2 mmio: [e41fffffe4100000, f7981c14f78ab800] bus: 04 index 3 mmio: [0, f7981c14f78ab800] bus: 0c index 0 io port: [8fff00007000, f7981c14f78ac000] bus: 0c index 1 mmio: [ebffffffea000000, f7981c14f78ac000] bus: 0c index 2 mmio: [e42fffffe4200000, f7981c14f78ac000] bus: 0c index 3 mmio: [0, f7981c14f78ac000] bus: 15 index 0 io port: [cfff00009000, f7981c14f78af000] bus: 15 index 1 mmio: [e7ffffffe4300000, f7981c14f78af000] bus: 15 index 2 mmio: [e3ffffffe0000000, f7981c14f78af000] bus: 15 index 3 io port: [ffff00000000, f7981c14f78af000] bus: 15 index 4 mmio: [ffffffff00000000, f7981c14f78af000] bus: 16 index 0 io port: [90ff00009000, f7983014f798a800] bus: 16 index 1 io port: [94ff00009400, f7983014f798a800] bus: 16 index 2 mmio: [e3ffffffe0000000, f7983014f798a800] bus: 16 index 3 mmio: [8bffffff88000000, f7983014f798a800] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:00.0: calling pci_fixup_video+0x0/0x9a pci 0000:00:02.0: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:02.0: calling pci_fixup_video+0x0/0x9a pci 0000:00:02.0: Boot video device pci 0000:00:02.1: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:02.1: calling pci_fixup_video+0x0/0x9a pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:1b.0: calling pci_fixup_video+0x0/0x9a pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:1c.0: calling pci_fixup_video+0x0/0x9a pci 0000:00:1c.1: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:1c.1: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:1c.1: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:1c.1: calling pci_fixup_video+0x0/0x9a pci 0000:00:1c.2: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:1c.2: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:1c.2: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:1c.2: calling pci_fixup_video+0x0/0x9a pci 0000:00:1c.3: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:1c.3: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:1c.3: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:1c.3: calling pci_fixup_video+0x0/0x9a pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000 pci 0000:00:1d.0: Performing full reset pci 0000:00:1d.0: calling pci_fixup_video+0x0/0x9a pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000 pci 0000:00:1d.1: Performing full reset pci 0000:00:1d.1: calling pci_fixup_video+0x0/0x9a pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 pci 0000:00:1d.2: Performing full reset pci 0000:00:1d.2: calling pci_fixup_video+0x0/0x9a pci 0000:00:1d.3: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:1d.3: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:1d.3: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000 pci 0000:00:1d.3: Performing full reset pci 0000:00:1d.3: calling pci_fixup_video+0x0/0x9a pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:1d.7: calling pci_fixup_video+0x0/0x9a pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:1e.0: calling pci_fixup_video+0x0/0x9a pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:1f.0: calling pci_fixup_video+0x0/0x9a pci 0000:00:1f.1: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:1f.1: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:1f.1: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:1f.1: calling pci_fixup_video+0x0/0x9a pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:1f.2: calling pci_fixup_video+0x0/0x9a pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x164 pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:00:1f.3: calling pci_fixup_video+0x0/0x9a pci 0000:02:00.0: calling quirk_e100_interrupt+0x0/0x164 pci 0000:02:00.0: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:02:00.0: calling pci_fixup_video+0x0/0x9a pci 0000:03:00.0: calling quirk_e100_interrupt+0x0/0x164 pci 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:03:00.0: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:03:00.0: calling pci_fixup_video+0x0/0x9a pci 0000:15:00.0: calling quirk_cardbus_legacy+0x0/0x26 pci 0000:15:00.0: calling quirk_usb_early_handoff+0x0/0x3aa pci 0000:15:00.0: calling pci_fixup_video+0x0/0x9a Simple Boot Flag at 0x35 set to 0x1 Microcode Update Driver: v2.00 Initializing RT-Tester: OK ====[ backtrace testing ]=========== Testing a backtrace from process context. The following trace is a kernel self test and not a bug! Pid: 1, comm: swapper Not tainted 2.6.27-rc3-tip-00607-g3c311a4-dirty #1 [] backtrace_regression_test+0x2f/0xd1 [] ? __percpu_alloc_mask+0xac/0xbd [] ? crash_save_vmcoreinfo_init+0x30a/0x316 [] do_one_initcall+0x42/0x133 [] ? backtrace_regression_test+0x0/0xd1 [] ? trace_hardirqs_on_caller+0xe8/0x11d [] ? trace_hardirqs_on+0xb/0xd [] ? __queue_work+0x2b/0x30 [] ? queue_work_on+0x3a/0x46 [] kernel_init+0x16e/0x1d5 [] ? kernel_init+0x0/0x1d5 [] kernel_thread_helper+0x7/0x10 ======================= Testing a backtrace from irq context. The following trace is a kernel self test and not a bug! Pid: 7, comm: ksoftirqd/1 Not tainted 2.6.27-rc3-tip-00607-g3c311a4-dirty #1 [] ? trace_hardirqs_on_caller+0xd2/0x11d [] backtrace_test_irq_callback+0xd/0x19 [] tasklet_action+0x78/0xe3 [] __do_softirq+0x89/0x10c [] ? __do_softirq+0x0/0x10c [] do_softirq+0x7e/0xdf [] ksoftirqd+0x67/0xc8 [] ? ksoftirqd+0x0/0xc8 [] kthread+0x40/0x66 [] ? kthread+0x0/0x66 [] kernel_thread_helper+0x7/0x10 ======================= Testing a saved backtrace. The following trace is a kernel self test and not a bug! [] save_stack_trace+0x22/0x41 [] backtrace_regression_test+0xb6/0xd1 [] do_one_initcall+0x42/0x133 [] kernel_init+0x16e/0x1d5 [] kernel_thread_helper+0x7/0x10 [] 0xffffffff ====[ end of backtrace testing ]==== audit: initializing netlink socket (disabled) type=2000 audit(1219087960.500:1): initialized rcu-torture:--- Start of test: nreaders=4 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1 Testing tracer sched_switch: <6>ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 found new irq_cfg for irq 19 0 add_pin_to_irq: irq 19 --> apic 0 pin 19 found new irq_desc for irq 19 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: supports USB remote wakeup ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000 ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: default language 0x0409 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub PASSED Testing tracer ftrace: <7>ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 8: status 0501 change 0001 PASSED Testing tracer wakeup: <7>hub 1-0:1.0: state 7 ports 8 chg 0100 evt 0000 hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-rc3-tip-00607-g3c311a4-dirty ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 64 td 64 USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: detected 2 ports uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.0: Performing full reset uhci_hcd 0000:00:1d.0: supports USB remote wakeup uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 usb usb2: default language 0x0409 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:1d.7: port 8 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 8 not reset yet, waiting 50ms usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-rc3-tip-00607-g3c311a4-dirty uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 found new irq_cfg for irq 17 0 add_pin_to_irq: irq 17 --> apic 0 pin 17 found new irq_desc for irq 17 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.1: Performing full reset uhci_hcd 0000:00:1d.1: supports USB remote wakeup uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840 usb usb3: default language 0x0409 usb usb3: uevent usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good hub 3-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003002 POWER OWNER sig=se0 CSC hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100 hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 .. no entries found ..FAILED! highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) DLM (built Aug 18 2008 21:29:35) installed Installing knfsd (copyright (C) 1996 okir@monad.swb.de). EFS: 1.0a - http://aeschi.ch.eu.org/efs/ QNX4 filesystem 0.2.3 registered. fuse init (API version 7.9) JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with ACLs, security attributes, realtime, debug enabled SGI XFS Quota Management subsystem BeFS version: 0.9.3 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8 hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27-rc3-tip-00607-g3c311a4-dirty uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 found new irq_cfg for irq 18 0 add_pin_to_irq: irq 18 --> apic 0 pin 18 found new irq_desc for irq 18 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.2: Performing full reset uhci_hcd 0000:00:1d.2: supports USB remote wakeup uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb4: default language 0x0409 usb usb4: uevent usb usb4: usb_probe_device usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: uevent hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 4-0:1.0: trying to enable port power on non-switchable hub Clocksource tsc unstable (delta = 73064959 ns) hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27-rc3-tip-00607-g3c311a4-dirty uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: detected 2 ports uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.3: Performing full reset uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 usb usb5: default language 0x0409 usb usb5: uevent usb usb5: usb_probe_device usb usb5: configuration #1 chosen from 1 choice usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: uevent hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good hub 5-0:1.0: trying to enable port power on non-switchable hub uhci_hcd 0000:00:1d.3: port 2 portsc 009b,00 hub 5-0:1.0: port 2: status 0101 change 0003 hub 5-0:1.0: state 7 ports 2 chg 0004 evt 0000 hub 5-0:1.0: port 2, status 0101, change 0000, 12 Mb/s usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27-rc3-tip-00607-g3c311a4-dirty uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6 cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 cpcihp_generic: not configured, disabling. shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 fakephp: Fake PCI Hot Plug Controller Driver pci_create_slot: created pci_slot on 0000:00:00 pci_create_slot: created pci_slot on 0000:00:02 pci_create_slot: created pci_slot on 0000:00:1b pci_create_slot: created pci_slot on 0000:00:1c pci_create_slot: created pci_slot on 0000:00:1d pci_create_slot: created pci_slot on 0000:00:1e pci_create_slot: created pci_slot on 0000:00:1f pci_create_slot: created pci_slot on 0000:02:00 pci_create_slot: created pci_slot on 0000:03:00 pci_create_slot: created pci_slot on 0000:15:00 INTEL CARILLO RANCH LPC not found. Carillo Ranch Backlight Driver Initialized. nvidiafb_setup START vmlfb: initializing Could not find Carillo Ranch MCH device. input: Video Bus as /class/input/input3 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) input: Video Bus as /class/input/input4 ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) pci_create_slot: inc refcount to 2 on 0000:15:00 isapnp: Scanning for PnP cards... usb 5-2: new full speed USB device using uhci_hcd and address 2 usb 5-2: ep0 maxpacket = 8 usb 5-2: default language 0x0409 usb 5-2: uevent usb 5-2: usb_probe_device usb 5-2: configuration #1 chosen from 1 choice usb 5-2: adding 5-2:1.0 (config #1, interface 0) usb 5-2:1.0: uevent usb 5-2: New USB device found, idVendor=0483, idProduct=2016 usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: Biometric Coprocessor usb 5-2: Manufacturer: STMicroelectronics isapnp: No Plug & Play device found RocketPort device driver module, version 2.09, 12-June-2003 No rocketport ports found; unloading driver Cyclades driver 2.5 (built Aug 18 2008 21:27:36) Initializing Nozomi driver 2.1d (build date: Aug 18 2008 21:27:42) MOXA Intellio family driver version 6.0k SyncLink serial driver $Revision: 4.38 $ SyncLink serial driver $Revision: 4.38 $, tty major#250 SyncLink GT $Revision: 4.50 $ SyncLink GT $Revision: 4.50 $, tty major#249 SyncLink GT no devices found HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 N_HDLC line discipline registered. lp: driver loaded but no devices found Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ ac.o: No PCI boards found. ac.o: For an ISA board you must supply memory and irq parameters. sonypi: Sony Programmable I/O Controller Driver v1.26. hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 toshiba: not a supported Toshiba laptop ppdev: user-space parallel port driver nsc_gpio initializing telclk_interrup = 0xf non-mcpbl0010 hw. Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 SyncLink PC Card driver $Revision: 4.34 $ SyncLink PC Card driver $Revision: 4.34 $, tty major#248 cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte ipmi message handler version 39.2 ipmi device interface IPMI System Interface driver. ipmi_si: Unable to find any System Interface(s) Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [drm] Initialized drm 1.1.0 20060810 intelfb: intelfb_init intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets intelfb: Version 0.9.5 intelfb: intelfb_setup intelfb: no options intelfb: intelfb_pci_register intelfb 0000:00:02.0: power state changed by ACPI to D0 intelfb 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 intelfb: fb aperture: 0xd0000000/0x10000000, MMIO region: 0xee100000/0x80000 intelfb: 00:02.0: Intel(R) 945GM, aperture size 256MB, stolen memory 7932kB intelfb: MTRR is disabled in the kernel intelfb: fb: 0xd0000000(+ 0x0)/0x7bf000 (0xf8f00000) intelfb: MMIO: 0xee100000/0x80000 (0xfc700000) intelfb: ring buffer: 0xd3001000/0x10000 (0xfbf01000) intelfb: HW cursor: 0x0/0x0 (0x00000000) (offset 0x0) (phys 0x0) intelfb: options: vram = 4, accel = 1, hwcursor = 0, fixed = 0, noinit = 0 intelfb: options: mode = "" intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching. intelfb: Video mode must be programmed at boot time. intelfb: cleanup Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A pnp: the driver 'serial' has been registered usb usb2: suspend_rh (auto-stop) usb usb3: suspend_rh (auto-stop) usb usb4: suspend_rh (auto-stop) hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend usb usb2: suspend_rh hub 3-0:1.0: hub_suspend usb usb3: bus auto-suspend usb usb3: suspend_rh hub 4-0:1.0: hub_suspend usb usb4: bus auto-suspend usb usb4: suspend_rh floppy0: no floppy controllers found brd: module loaded loop: module loaded Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.20) MM: desc_per_page = 128 usbcore: registered new interface driver ub ibmasm: IBM ASM Service Processor Driver version 1.0 loaded acer-wmi: Acer Laptop ACPI-WMI Extras acer-wmi: No or unsupported WMI interface, unable to load Phantom Linux Driver, version n0.9.8, init OK thinkpad_acpi: ThinkPad ACPI Extras v0.21 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 79ET56WW (1.02 ), EC 79HT42WW-1.01 thinkpad_acpi: Lenovo ThinkPad T60, model 1951A26 thinkpad_acpi: radio switch found; radios are disabled Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi:orange:batt Registered led device: tpacpi:green:batt Registered led device: tpacpi::dock_active Registered led device: tpacpi::bay_active Registered led device: tpacpi::dock_batt Registered led device: tpacpi::unknown_led Registered led device: tpacpi::standby input: ThinkPad Extra Buttons as /class/input/input5 e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:02:00.0: Disabling L1 ASPM vendor=8086 device=27d0 e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:02:00.0: setting latency timer to 64 0000:02:00.0: 0000:02:00.0: Warning: detected ASPM enabled in EEPROM 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:41:17:49:d2 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003 vcan: Virtual CAN interface driver Ethernet Channel Bonding Driver: v3.3.0 (June 10, 2008) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ns83820.c: National Semiconductor DP83820 10/100/1000 driver. cs89x0:cs89x0_probe(0x0) PP_addr at 300[a]: 0xffff eth1: incorrect signature at 300[c]: 0xffff!=0x630E PP_addr at 320[a]: 0xffff eth1: incorrect signature at 320[c]: 0xffff!=0x630E PP_addr at 340[a]: 0xffff eth1: incorrect signature at 340[c]: 0xffff!=0x630E PP_addr at 360[a]: 0xffff eth1: incorrect signature at 360[c]: 0xffff!=0x630E PP_addr at 200[a]: 0xffff eth1: incorrect signature at 200[c]: 0xffff!=0x630E PP_addr at 220[a]: 0xffff eth1: incorrect signature at 220[c]: 0xffff!=0x630E PP_addr at 240[a]: 0xffff eth1: incorrect signature at 240[c]: 0xffff!=0x630E PP_addr at 260[a]: 0xffff eth1: incorrect signature at 260[c]: 0xffff!=0x630E PP_addr at 280[a]: 0xffff eth1: incorrect signature at 280[c]: 0xffff!=0x630E PP_addr at 2a0[a]: 0xffff eth1: incorrect signature at 2a0[c]: 0xffff!=0x630E PP_addr at 2c0[a]: 0xffff eth1: incorrect signature at 2c0[c]: 0xffff!=0x630E PP_addr at 2e0[a]: 0xffff eth1: incorrect signature at 2e0[c]: 0xffff!=0x630E cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. pnp: the driver '3c509' has been registered Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky proteon.c: 0 cards found. proteon.c: No cards found. skisa.c: 0 cards found. skisa.c: No cards found. HDLC support module revision 1.22 DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org. SDLA driver v0.30, 12 Sep 1996, mike.mclagan@linux.org. Cyclom 2X Support Module v0.6 (c) 1998-2003 Arnaldo Carvalho de Melo CYCLOM 2X(tm) Sync Card Driver v0.11 (c) 1998-2003 Arnaldo Carvalho de Melo arcnet loaded. arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. arcnet: raw mode (`r') encapsulation support loaded. arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) E-mail me if you actually test this driver, please! arc%d: No autoprobe for IO mapped cards; you must specify the base address! arcnet: RIM I (entirely mem-mapped) support E-mail me if you actually test the RIM I driver, please! arc%d: Given: node 00h, shmem 0h, irq 0 arc%d: No autoprobe for RIM I; you must specify the shmem and irq! usbcore: registered new interface driver catc catc: v2.8 CATC EL1210A NetMate USB Ethernet driver pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new interface driver pegasus usbcore: registered new interface driver asix usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver dm9601 usbcore: registered new interface driver gl620a usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels) dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker http://www.scyld.com/network/drivers.html uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) usbcore: registered new interface driver irda-usb USB IrDA support registered usbcore: registered new interface driver stir4200 pnp: the driver 'nsc-ircc' has been registered nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. nsc-ircc 00:0a: driver attached nsc-ircc, chip->init nsc-ircc, Found chip at base=0x164e nsc-ircc, driver loaded (Dag Brattli) nsc_ircc_open(), can't get iobase of 0x2f8 nsc-ircc, Found chip at base=0x164e nsc-ircc, driver loaded (Dag Brattli) nsc_ircc_open(), can't get iobase of 0x2f8 nsc-ircc 00:0a: disabled pnp: the driver 'nsc-ircc' has been unregistered w83977af_init() w83977af_open() w83977af_probe() w83977af_probe(), Wrong chip version<7>w83977af_probe() w83977af_probe(), Wrong chip version<6>usbcore: registered new interface driver mcs7780 usbcore: registered new interface driver kingsun-sir usbcore: registered new interface driver ks959-sir console [netcon0] enabled netconsole: network logging started input: Macintosh mouse button emulation as /class/input/input6 Loading iSCSI transport class v2.0-870. rdac: device handler registered hp_sw: device handler registered iscsi: registered transport (tcp) Adaptec aacraid driver 1.1-5[2456]-ms scsi: Detection failed (no card) sym53c416.c: Version 1.0.0-ac qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k6 iscsi: registered transport (qla4xxx) QLogic iSCSI HBA Driver Emulex LightPulse Fibre Channel SCSI driver 8.2.7 Copyright(c) 2004-2008 Emulex. All rights reserved. Failed initialization of WD-7000 SCSI card! DC390: clustering now enabled by default. If you get problems load with "disable_clustering=1" and report to maintainers megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) 3ware Storage Controller device driver for Linux v1.26.02.002. ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007) Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods Driver 'ses' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 found new irq_cfg for irq 1024256 found new irq_desc for irq 1024256 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 1024256 ata2: DUMMY ata3: DUMMY ata4: DUMMY ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4I PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, 0X05, max UDMA/33 ata5.00: configured for UDMA/33 ata6: port disabled. ignoring. scsi 4:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4246N 0X05 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg1 type 5 pnp: the driver 'pata_isapnp' has been registered Intel ISA PCIC probe: not found. aoe: AoE v47 initialised. sl811: driver sl811-hcd, 19 May 2005 r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008 usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver mdc800 mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera usbcore: registered new interface driver microtekX6 usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core usbserial: USB Serial support registered for ch341-uart usbcore: registered new interface driver ch341 usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader usbcore: registered new interface driver cyberjack cyberjack: v1.01 Matthias Bruestle cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver usbserial: USB Serial support registered for Digi 2 port USB adapter usbserial: USB Serial support registered for Digi 4 port USB adapter usbcore: registered new interface driver digi_acceleport digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver usbserial: USB Serial support registered for Edgeport 2 port adapter usbserial: USB Serial support registered for Edgeport 4 port adapter usbserial: USB Serial support registered for Edgeport 8 port adapter usbserial: USB Serial support registered for EPiC device usbcore: registered new interface driver io_edgeport io_edgeport: Edgeport USB Serial Driver v2.7 usbserial: USB Serial support registered for Edgeport TI 1 port adapter usbserial: USB Serial support registered for Edgeport TI 2 port adapter usbcore: registered new interface driver io_ti io_ti: Edgeport USB Serial Driver v0.7mode043006 usbserial: USB Serial support registered for empeg usbcore: registered new interface driver empeg empeg: v1.2:USB Empeg Mark I/II Driver usbserial: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver ftdi_sio ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver usbserial: USB Serial support registered for PocketPC PDA ipaq: USB PocketPC PDA driver v0.5 usbcore: registered new interface driver ipaq usbserial: USB Serial support registered for IR Dongle usbcore: registered new interface driver ir-usb ir_usb: USB IR Dongle driver v0.4 usbserial: USB Serial support registered for iuu_phoenix usbcore: registered new interface driver iuu_phoenix iuu_phoenix: Infinity USB Unlimited Phoenix driver v0.5 usbserial: USB Serial support registered for Keyspan - (without firmware) usbserial: USB Serial support registered for Keyspan 1 port adapter usbserial: USB Serial support registered for Keyspan 2 port adapter usbserial: USB Serial support registered for Keyspan 4 port adapter usbcore: registered new interface driver keyspan keyspan: v1.1.5:Keyspan USB to Serial Converter Driver usbserial: USB Serial support registered for Keyspan PDA usbserial: USB Serial support registered for Keyspan PDA - (prerenumeration) usbcore: registered new interface driver keyspan_pda keyspan_pda: USB Keyspan PDA Converter driver v1.1 usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect usbcore: registered new interface driver kl5kusb105d kl5kusb105: KLSI KL5KUSB105 chipset USB->Serial Converter driver v0.3a usbserial: USB Serial support registered for MCT U232 usbcore: registered new interface driver mct_u232 mct_u232: Magic Control Technology USB-RS232 converter driver z2.1 usbserial: USB Serial support registered for Moschip 2 port adapter mos7720: Moschip USB Serial Driver 1.0.0.4F usbcore: registered new interface driver moschip7720 usbserial: USB Serial support registered for navman usbcore: registered new interface driver navman usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb usbcore: registered new interface driver omninet omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver usbserial: USB Serial support registered for oti6858 usbcore: registered new interface driver oti6858 usbserial: USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver safe_serial: v0.0b sl@lineo.com, tbr@lineo.com safe_serial: USB Safe Encapsulated Serial safe_serial: vendor: 0 product: 0 safe: 1 padded: 0 usbserial: USB Serial support registered for safe_serial usbcore: registered new interface driver safe_serial usbserial: USB Serial support registered for Sierra USB modem usbcore: registered new interface driver sierra sierra: USB Driver for Sierra Wireless USB modems: v.1.2.13a usbserial: USB Serial support registered for Handspring Visor / Palm OS usbserial: USB Serial support registered for Sony Clie 3.5 usbserial: USB Serial support registered for Sony Clie 5.0 usbcore: registered new interface driver visor visor: USB HandSpring Visor / Palm OS driver drivers/usb/misc/adutux.c : adu_init : enter usbcore: registered new interface driver adutux adutux: adutux adutux (see www.ontrak.net) v0.0.13 adutux: adutux is an experimental driver. Use at your own risk drivers/usb/misc/adutux.c : adu_init : leave, return value 0 usbcore: registered new interface driver appledisplay usbcore: registered new interface driver cypress_cy7c63 usbcore: registered new interface driver cytherm cytherm: v1.0:Cypress USB Thermometer driver usbcore: registered new interface driver emi26 - firmware loader usbcore: registered new interface driver isight_firmware usbcore: registered new interface driver usblcd usbcore: registered new interface driver usbled drivers/usb/misc/legousbtower.c: lego_usb_tower_init: enter usbcore: registered new interface driver legousbtower legousbtower: LEGO USB Tower Driver v0.96 drivers/usb/misc/legousbtower.c: lego_usb_tower_init: leave, return value 0 usbcore: registered new interface driver phidgetkit usbcore: registered new interface driver phidgetmotorcontrol usbcore: registered new interface driver phidgetservo usbcore: registered new interface driver uss720 uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip uss720: NOTE: this is a special purpose driver to allow nonstandard uss720: protocols (eg. bitbang) over USS720 usb to parallel cables uss720: If you just want to connect to a printer, use usblp instead usbcore: registered new interface driver sisusb usbcore: registered new interface driver cxacru [ueagle-atm] driver ueagle 1.4 loaded usbcore: registered new interface driver ueagle-atm drivers/usb/atm/usbatm.c: usbatm_usb_init: driver version 1.10 drivers/usb/atm/xusbatm.c: xusbatm_init xusbatm: malformed module parameters pnp: the driver 'i8042 kbd' has been registered i8042 kbd 00:08: driver attached pnp: the driver 'i8042 aux' has been registered i8042 aux 00:09: driver attached PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 parkbd: no such parport pnp: the driver 'ns558' has been registered mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input7 usbcore: registered new interface driver appletouch usbcore: registered new interface driver bcm5974 logibm.c: Didn't find Logitech busmouse at 0x23c usbcore: registered new interface driver iforce usbcore: registered new interface driver aiptek aiptek: v2.3 (May 2, 2007): Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen aiptek: Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) usbcore: registered new interface driver gtco GTCO usb driver version: 2.00.0006<6>usbcore: registered new interface driver kbtab kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver input: PC Speaker as /class/input/input8 wistron_btns: System unknown usbcore: registered new interface driver ati_remote ati_remote: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1 usbcore: registered new interface driver ati_remote2 ati_remote2: ATI/Philips USB RF remote driver 0.2 usbcore: registered new interface driver keyspan_remote usbcore: registered new interface driver yealink yealink: Yealink phone driver:yld-20051230 apanel: Fujitsu BIOS signature 'FJKEYINF' not found... I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 pnp: the driver 'rtc_cmos' has been registered rtc_cmos: dev (254:0) rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, hpet irqs rtc_cmos 00:07: driver attached i2c-core: driver [rtc-ds1374] registered i2c-core: driver [ds1672] registered i2c-core: driver [rtc-fm3130] registered i2c-core: driver [rtc-isl1208] registered i2c-core: driver [max6900] registered i2c-core: driver [rtc-rs5c372] registered i2c-core: driver [rtc-x1205] registered i2c /dev entries driver i2c-core: driver [dev_driver] registered i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt i2c-adapter i2c-0: adapter [SMBus I801 adapter at 18e0] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x50 i801_smbus 0000:00:1f.3: No response i2c-dev: adapter [SMBus I801 adapter at 18e0] registered as minor 0 i2c-parport-light: adapter type unspecified usbcore: registered new interface driver i2c-tiny-usb i2c-core: driver [ds1682] registered i2c-core: driver [at24] registered i2c-core: driver [eeprom] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x50 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x51 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x52 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x53 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x54 i2c-adapter i2c-0: Creating eeprom at 0x54 i2c 0-0054: uevent eeprom 0-0054: probe i2c-adapter i2c-0: client [eeprom] registered with bus id 0-0054 i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x55 i2c-adapter i2c-0: Creating eeprom at 0x55 i2c 0-0055: uevent eeprom 0-0055: probe i2c-adapter i2c-0: client [eeprom] registered with bus id 0-0055 i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x56 i2c-adapter i2c-0: Creating eeprom at 0x56 i2c 0-0056: uevent eeprom 0-0056: probe i2c-adapter i2c-0: client [eeprom] registered with bus id 0-0056 i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x57 i2c-adapter i2c-0: Creating eeprom at 0x57 i2c 0-0057: uevent eeprom 0-0057: probe i2c-adapter i2c-0: client [eeprom] registered with bus id 0-0057 i2c-core: driver [pca9539] registered i2c-core: driver [pcf8574] registered i2c-core: driver [pcf8575] registered i2c-core: driver [pcf8591] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x48 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x49 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4a i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4b i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4e i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4f i801_smbus 0000:00:1f.3: No response i2c-core: driver [tsl2550] registered Driver for 1-wire Dallas network protocol. usbcore: registered new interface driver DS9490R 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko i2c-core: driver [asb100] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d i801_smbus 0000:00:1f.3: No response i2c-core: driver [w83781d] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x28 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x29 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2a i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2b i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2f i801_smbus 0000:00:1f.3: No response i2c-core: driver [w83791d] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2f i801_smbus 0000:00:1f.3: No response i2c-core: driver [ad7414] registered i2c-core: driver [ad7418] registered i2c-core: driver [adm1021] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x18 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x19 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x1a i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x29 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2a i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2b i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4e i801_smbus 0000:00:1f.3: No response i2c-core: driver [adm1025] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e i801_smbus 0000:00:1f.3: No response i2c-core: driver [adm1026] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e i801_smbus 0000:00:1f.3: No response i2c-core: driver [adm1029] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x28 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x29 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2a i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2b i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2f i801_smbus 0000:00:1f.3: No response i2c-core: driver [adm1031] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e i801_smbus 0000:00:1f.3: No response i2c-core: driver [dme1737] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e i801_smbus 0000:00:1f.3: No response i2c-core: driver [ds1621] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x48 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x49 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4a i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4b i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4e i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4f i801_smbus 0000:00:1f.3: No response f71882fg: Not a Fintek device f71882fg: Not a Fintek device i2c-core: driver [fschmd] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x73 i801_smbus 0000:00:1f.3: No response i2c-core: driver [fscpos] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x73 i801_smbus 0000:00:1f.3: No response hdaps: inverting axis readings. hdaps: LENOVO ThinkPad T60 detected. input: hdaps as /class/input/input9 hdaps: driver successfully loaded. i2c-core: driver [lm75] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x48 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x49 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4a i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4b i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4e i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4f i801_smbus 0000:00:1f.3: No response i2c-core: driver [lm77] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x48 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x49 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4a i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4b i801_smbus 0000:00:1f.3: No response i2c-core: driver [lm80] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x28 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x29 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2a i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2b i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2f i801_smbus 0000:00:1f.3: No response i2c-core: driver [lm83] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x18 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x19 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x1a i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x29 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2a i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2b i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4e i801_smbus 0000:00:1f.3: No response i2c-core: driver [lm85] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e i801_smbus 0000:00:1f.3: No response i2c-core: driver [lm87] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e i801_smbus 0000:00:1f.3: No response i2c-core: driver [lm92] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x48 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x49 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4a i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4b i801_smbus 0000:00:1f.3: No response i2c-core: driver [max1619] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x18 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x19 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x1a i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x29 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2a i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2b i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4c i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4d i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4e i801_smbus 0000:00:1f.3: No response i2c-core: driver [max6650] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x1b i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x1f i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x48 i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4b i801_smbus 0000:00:1f.3: No response pc87360: PC8736x not detected, module not inserted. i2c-core: driver [w83l785ts] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e i801_smbus 0000:00:1f.3: No response i2c-core: driver [w83l786ng] registered i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e i801_smbus 0000:00:1f.3: No response i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2f i801_smbus 0000:00:1f.3: No response device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com Bluetooth: HCI USB driver ver 2.10 usbcore: registered new interface driver hci_usb Bluetooth: Virtual HCI driver ver 1.2 Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: Broadcom Blutonium firmware driver ver 1.2 usbcore: registered new interface driver bcm203x Bluetooth: Digianswer Bluetooth USB driver ver 0.10 usbcore: registered new interface driver bpa10x Bluetooth: BlueFRITZ! USB driver ver 1.2 usbcore: registered new interface driver bfusb Bluetooth: Generic Bluetooth SDIO driver ver 0.1 ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 PPP BSD Compression module registered CAPI Subsystem Rev 1.1.2.8 capidrv: Rev 1.1.2.2: loaded b1isa: revision 1.1.2.3 b1: revision 1.1.2.2 b1pci: revision 1.1.2.2 b1dma: revision 1.1.2.3 b1pci: revision 1.1.2.2 t1isa: revision 1.1.2.3 t1pci: revision 1.1.2.2 c4: revision 1.1.2.2 dss1_divert module successfully installed HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (kernel) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 HiSax: LinkLayer Revision 2.59.2.4 HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: Traverse Tech. NETspider-U driver Rev. 2.14.2.3 NETspider-U: No PCI card found HiSax: Card NETspider-U not installed ! hisax_st5481: ST5481 USB ISDN driver $Revision: 2.4.2.3 $ usbcore: registered new interface driver st5481_usb HFC-S USB: driver module revision 2.3.2.24 date 2007/10/14 loaded, (debug=0) usbcore: registered new interface driver hfc_usb HFC-4S/8S: Layer 1 driver module for HFC-4S/8S isdn chips, Revision: 1.10 HFC-4S/8S: (C) 2003 Cornelius Consult, www.cornelius-consult.de HFC-4S/8S: found 0 cards PCBIT-D device driver v 0.5-fjpc0 19991204 - Copyright (C) 1996 Universidade de Lisboa Trying to detect board using default settings PCBIT: memory region d0000-d1000 already in use IBM Active 2000 ISDN driver act2000: No cards defined yet lguest: mapped switcher at ffc00000 cpuidle: using governor ladder cpuidle: using governor menu wbsd: Winbond W83L51xD SD/MMC card interface driver wbsd: Copyright(c) Pierre Ossman pnp: the driver 'wbsd' has been registered i2c-core: driver [pca9532] registered i2c-core: driver [leds-pca955x] registered dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) No iBFT detected. pktgen v2.70: Packet Generator for packet performance testing. NET: Registered protocol family 26 IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP bic registered TCP cubic registered TCP westwood registered TCP highspeed registered TCP hybla registered TCP htcp registered TCP vegas registered TCP veno registered TCP yeah registered TCP illinois registered NET: Registered protocol family 10 lo: Disabled Privacy Extensions tunl0: Disabled Privacy Extensions Mobile IPv6 IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions ip6tnl0: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 4 can: controller area network core (rev 20071116 abi 8) NET: Registered protocol family 29 IrCOMM protocol (Dag Brattli) Bluetooth: L2CAP ver 2.10 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: CMTP (CAPI Emulation) ver 1.0 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered rdma transport module. NET: Registered protocol family 33 lec.c: Aug 18 2008 21:28:11 initialized mpc.c: Aug 18 2008 21:27:59 initialized NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team DECnet: Routing cache hash table of 1024 buckets, 32Kbytes NET: Registered protocol family 12 CCID: Registered CCID 2 (TCP-like) SCTP: Hash tables configured (established 65536 bind 65536) sctp_init_sock(sk: f69b8000) TIPC: Activated (version 1.6.4 compiled Aug 18 2008 21:29:30) NET: Registered protocol family 30 TIPC: Started in single node mode Installing 9P2000 support Using IPI No-Shortcut mode kAFS: Red Hat AFS client v0.1 registering. hd: no drives specified - use hd=cyl,head,sectors on kernel command line kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 568k freed Write protecting the kernel text: 9636k Write protecting the kernel read-only data: 3960k usb usb2: uevent usb 2-0:1.0: uevent usb usb3: uevent usb 3-0:1.0: uevent usb usb4: uevent usb 4-0:1.0: uevent usb usb5: uevent usb 5-0:1.0: uevent usb 5-2: uevent usb 5-2:1.0: uevent usb usb1: uevent usb 1-0:1.0: uevent found new irq_cfg for irq 2097408 found new irq_desc for irq 2097408 ADDRCONF(NETDEV_UP): eth0: link is not ready 0000:02:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready EXT3 FS on sda1, internal journal Adding 4096564k swap on /dev/sda2. Priority:-1 extents:1 across:4096564k eth0: no IPv6 routers present warning: `named' uses deprecated v2 capabilities in a way that may be insecure. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.27-rc3-tip-00607-g3c311a4-dirty #1 ------------------------------------------------------- Xorg/5359 is trying to acquire lock: (cpu_add_remove_lock){--..}, at: [] cpu_maps_update_begin+0x14/0x16 but task is already holding lock: (polldev_mutex){--..}, at: [] input_close_polled_device+0x22/0x47 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (polldev_mutex){--..}: [] validate_chain+0x831/0xaa2 [] __lock_acquire+0x67a/0x6e0 [] lock_acquire+0x5b/0x81 [] mutex_lock_interruptible_nested+0xde/0x2f8 [] input_open_polled_device+0x1c/0xa3 [] input_open_device+0x5a/0x86 [] evdev_open+0x103/0x14f [] input_open_file+0x44/0x60 [] chrdev_open+0xf1/0x108 [] __dentry_open+0x135/0x21f [] nameidata_to_filp+0x24/0x38 [] do_filp_open+0x351/0x636 [] do_sys_open+0x47/0xbc [] sys_open+0x23/0x2b [] sysenter_do_call+0x12/0x3f [] 0xffffffff -> #4 (&dev->mutex){--..}: [] validate_chain+0x831/0xaa2 [] __lock_acquire+0x67a/0x6e0 [] lock_acquire+0x5b/0x81 [] mutex_lock_interruptible_nested+0xde/0x2f8 [] input_register_handle+0x26/0x7a [] kbd_connect+0x64/0x8d [] input_attach_handler+0x38/0x6b [] input_register_handler+0x74/0xc3 [] kbd_init+0x66/0x91 [] vty_init+0xce/0xd7 [] tty_init+0x193/0x197 [] do_one_initcall+0x42/0x133 [] kernel_init+0x16e/0x1d5 [] kernel_thread_helper+0x7/0x10 [] 0xffffffff -> #3 (input_mutex){--..}: [] validate_chain+0x831/0xaa2 [] __lock_acquire+0x67a/0x6e0 [] lock_acquire+0x5b/0x81 [] mutex_lock_interruptible_nested+0xde/0x2f8 [] input_register_device+0xff/0x17f [] acpi_button_add+0x31e/0x429 [] acpi_device_probe+0x43/0xde [] driver_probe_device+0xa5/0x120 [] __driver_attach+0x42/0x64 [] bus_for_each_dev+0x43/0x65 [] driver_attach+0x19/0x1b [] bus_add_driver+0x9e/0x1a1 [] driver_register+0x76/0xd2 [] acpi_bus_register_driver+0x3f/0x41 [] acpi_button_init+0x32/0x51 [] do_one_initcall+0x42/0x133 [] do_async_initcalls+0x1a/0x2a [] run_workqueue+0xc3/0x193 [] worker_thread+0xbb/0xc7 [] kthread+0x40/0x66 [] kernel_thread_helper+0x7/0x10 [] 0xffffffff -> #2 (async_work){--..}: [] validate_chain+0x831/0xaa2 [] __lock_acquire+0x67a/0x6e0 [] lock_acquire+0x5b/0x81 [] run_workqueue+0xbe/0x193 [] worker_thread+0xbb/0xc7 [] kthread+0x40/0x66 [] kernel_thread_helper+0x7/0x10 [] 0xffffffff -> #1 (kasyncinit){--..}: [] validate_chain+0x831/0xaa2 [] __lock_acquire+0x67a/0x6e0 [] lock_acquire+0x5b/0x81 [] cleanup_workqueue_thread+0x2b/0x5e [] destroy_workqueue+0x50/0x78 [] kernel_init+0x192/0x1d5 [] kernel_thread_helper+0x7/0x10 [] 0xffffffff -> #0 (cpu_add_remove_lock){--..}: [] validate_chain+0x5ba/0xaa2 [] __lock_acquire+0x67a/0x6e0 [] lock_acquire+0x5b/0x81 [] mutex_lock_nested+0xdb/0x27d [] cpu_maps_update_begin+0x14/0x16 [] destroy_workqueue+0x26/0x78 [] input_close_polled_device+0x3b/0x47 [] input_close_device+0x45/0x61 [] evdev_release+0x7f/0x99 [] __fput+0xb3/0x17c [] fput+0x1c/0x1e [] filp_close+0x55/0x5f [] sys_close+0x76/0xb2 [] sysenter_do_call+0x12/0x3f [] 0xffffffff other info that might help us debug this: 3 locks held by Xorg/5359: #0: (&evdev->mutex){--..}, at: [] evdev_release+0x67/0x99 #1: (&dev->mutex){--..}, at: [] input_close_device+0x1f/0x61 #2: (polldev_mutex){--..}, at: [] input_close_polled_device+0x22/0x47 stack backtrace: Pid: 5359, comm: Xorg Not tainted 2.6.27-rc3-tip-00607-g3c311a4-dirty #1 [] print_circular_bug_tail+0x9b/0xa6 [] validate_chain+0x5ba/0xaa2 [] __lock_acquire+0x67a/0x6e0 [] lock_acquire+0x5b/0x81 [] ? cpu_maps_update_begin+0x14/0x16 [] mutex_lock_nested+0xdb/0x27d [] ? cpu_maps_update_begin+0x14/0x16 [] ? trace_hardirqs_on_caller+0xe8/0x11d [] ? cpu_maps_update_begin+0x14/0x16 [] cpu_maps_update_begin+0x14/0x16 [] destroy_workqueue+0x26/0x78 [] input_close_polled_device+0x3b/0x47 [] input_close_device+0x45/0x61 [] evdev_release+0x7f/0x99 [] __fput+0xb3/0x17c [] fput+0x1c/0x1e [] filp_close+0x55/0x5f [] sys_close+0x76/0xb2 [] sysenter_do_call+0x12/0x3f [] ? x86_emulate_insn+0x31fc/0x3a34 ======================= -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/