Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753955AbYH3Oko (ORCPT ); Sat, 30 Aug 2008 10:40:44 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751610AbYH3Okf (ORCPT ); Sat, 30 Aug 2008 10:40:35 -0400 Received: from hpsmtp-eml14.kpnxchange.com ([213.75.38.114]:30432 "EHLO hpsmtp-eml14.kpnxchange.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750847AbYH3Ok3 (ORCPT ); Sat, 30 Aug 2008 10:40:29 -0400 From: Frans Pop To: Alan Stern Subject: Re: [regression] usb: sometimes dead keyboard after boot Date: Sat, 30 Aug 2008 16:40:20 +0200 User-Agent: KMail/1.9.9 Cc: Kernel development list , Kernel Testers List , USB list References: In-Reply-To: MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_VvVuIeArdxyf+6/" Message-Id: <200808301640.21043.elendil@planet.nl> X-OriginalArrivalTime: 30 Aug 2008 14:40:23.0426 (UTC) FILETIME=[55A56620:01C90AAE] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 92784 Lines: 1976 --Boundary-00=_VvVuIeArdxyf+6/ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline On Saturday 30 August 2008, Alan Stern wrote: > On Fri, 29 Aug 2008, Alan Stern wrote: > > > Does this sound at all logical and feasible? > > > > The first proposal is feasible; I can write a patch to implement it. > > How much it will end up helping anything isn't clear, though. > > Here's the promised patch. Be warned, I haven't tested it at all. The patch seems to do exactly what I was looking for! Details further down, but first some other comments. My first boot with your patch was with brltty still enabled. The log showed the right result, but I wanted to get a cleaner log without all the USB suspend/resume noise caused by brltty. So I disabled brltty's init script and rebooted. This gave a totally unexpected result: ehci now got loaded and initialized _before_ uhci which of course avoids the problem altogether (see attached log: dmesg_ehci-first). So apparently brltty's init script was responsible not only for the suspend/resume noise, but also influenced the load order of the two USB drivers. And apparently when things are left alone ehci _will_ be loaded before uhci, but that does not match what you described in earlier mails as it means the PCI bus order isn't followed. Confusing... Anyway, this meant that to test your patch I had to try to get uhci to load first again. This turned out to be simple: just adding uhci_hcd in /etc/modules did the trick. The result is in dmesg_uhci-first. That log shows what was desired, at least 3-1 and 4-1 get disconnected cleanly and I get no error messages to the console. Yay! I added two extra printk's around the usb_wait_for_khubd_idle call to show the exact effect of the wait (look for "khubd_idle" in two messages). These seem to show what was wanted: both keyboard and mouse are detected during the wait. But it also shows a few events on bus 3 and 4 that happen after I get khubd_idle that seem to indicate the probe on that bus is not completely finished and that could maybe still cause "problems". But maybe I'm just reading it wrong and those events are part of the lead up to the disconnects for the hand-off. Anyway, I'm quite happy with the result, so: Tested-by: Frans Pop Last note FYI. I had another case of "dead keyboard" this morning, again with the "reset low speed USB device" message in the log. Unfortunately this was before I enabled USB debugging (and obviously before I had applied the patch). I will now revert the patch and keep USB debugging enabled to see if I can catch this bug properly. I'll send the debug log when I do. Cheers, FJP --Boundary-00=_VvVuIeArdxyf+6/ Content-Type: text/plain; charset="iso 8859-15"; name="dmesg_ehci-first" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg_ehci-first" Linux version 2.6.27-rc5-usb (root@faramir) (gcc version 4.3.1 (Debian 4.3.1-9) ) #67 SMP Sat Aug 30 12:25:07 CEST 2008 Command line: root=/dev/mapper/main-root ro vga=791 quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f674000 (usable) BIOS-e820: 000000007f674000 - 000000007f6e9000 (ACPI NVS) BIOS-e820: 000000007f6e9000 - 000000007f6ec000 (usable) BIOS-e820: 000000007f6ec000 - 000000007f6ff000 (ACPI data) BIOS-e820: 000000007f6ff000 - 000000007f700000 (usable) last_pfn = 0x7f700 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 007f600000 page 2M 007f600000 - 007f700000 page 4k kernel direct mapping tables up to 7f700000 @ 8000-c000 last_map_addr: 7f700000 end: 7f700000 RAMDISK: 37d18000 - 37fefa45 DMI 2.3 present. ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT 7F6FDE48, 0058 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: FACP 7F6FCF10, 0074 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: DSDT 7F6F7010, 4348 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: FACS 7F6E2C40, 0040 ACPI: APIC 7F6FCE10, 0078 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: WDDT 7F6F6F90, 0040 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: MCFG 7F6F6F10, 003C (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: ASF! 7F6FCD10, 00A6 (r32 INTEL D945GCZ FF9 MSFT 1000013) ACPI: HPET 7F6F6E90, 0038 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: SSDT 7F6FDC10, 01BC (r1 INTEL CpuPm FF9 MSFT 1000013) ACPI: SSDT 7F6FDA10, 0175 (r1 INTEL Cpu0Ist FF9 MSFT 1000013) ACPI: SSDT 7F6FD810, 0175 (r1 INTEL Cpu1Ist FF9 MSFT 1000013) ACPI: SSDT 7F6FD610, 0175 (r1 INTEL Cpu2Ist FF9 MSFT 1000013) ACPI: SSDT 7F6FD410, 0175 (r1 INTEL Cpu3Ist FF9 MSFT 1000013) ACPI: SSDT 7F6F6E10, 002F (r1 INTEL SetupVar FF9 MSFT 1000013) ACPI: TCPA 7F6E4D90, 0032 (r1 INTEL TIANO 2 MSFT 1000013) No NUMA configuration found Faking a node at 0000000000000000-000000007f700000 Bootmem setup node 0 0000000000000000-000000007f700000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [000000000000a000 - 0000000000019edf] pages 10 (6 early reservations) ==> bootmem [0000000000 - 007f700000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000074e4e0] TEXT DATA BSS ==> [0000200000 - 000074e4e0] #3 [0037d18000 - 0037fefa45] RAMDISK ==> [0037d18000 - 0037fefa45] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000fe680] 000fe680 [ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001200000-ffff8800031fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007f674 0: 0x0007f6e9 -> 0x0007f6ec 0: 0x0007f6ff -> 0x0007f700 On node 0 totalpages: 521751 DMA zone: 2474 pages, LIFO batch:0 DMA32 zone: 509660 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 2 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 000000007f674000 - 000000007f6e9000 PM: Registered nosave memory: 000000007f6ec000 - 000000007f6ff000 Allocating PCI resources starting at 80000000 (gap: 7f700000:80900000) PERCPU: Allocating 47648 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 512134 Policy zone: DMA32 Kernel command line: root=/dev/mapper/main-root ro vga=791 quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PM_TIMER Detected 3199.880 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2045500k/2087936k available (2287k kernel code, 41504k reserved, 1438k data, 368k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.76 BogoMIPS (lpj=12799520) Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) D CPU 3.20GHz stepping 07 Using local APIC timer interrupts. APIC timer calibration result 12499526 Detected 12.499 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6399.92 BogoMIPS (lpj=12799859) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM1) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Pentium(R) D CPU 3.20GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (12799.68 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 net_namespace: 1552 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support. PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.3: PME# supported from D0 D3hot D3cold pci 0000:01:00.3: PME# disabled pci 0000:01:00.4: PME# supported from D0 D3hot D3cold pci 0000:01:00.4: PME# disabled PCI: bridge 0000:00:1c.0 io port: [1000, 1fff] PCI: bridge 0000:00:1c.0 32bit mmio: [90000000, 901fffff] PCI: bridge 0000:00:1c.2 32bit mmio: [90300000, 903fffff] PCI: bridge 0000:00:1c.3 32bit mmio: [90400000, 904fffff] PCI: bridge 0000:00:1c.4 32bit mmio: [90500000, 905fffff] PCI: bridge 0000:00:1c.5 32bit mmio: [90600000, 906fffff] pci 0000:00:1e.0: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: parse allocated resources pnp 00:00: add io 0xcf8-0xcff flags 0x1 pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: parse allocated resources pnp 00:01: add mem 0xf0000000-0xf3ffffff flags 0x0 pnp 00:01: add mem 0xfed13000-0xfed13fff flags 0x0 pnp 00:01: add mem 0xfed14000-0xfed17fff flags 0x0 pnp 00:01: add mem 0xfed18000-0xfed18fff flags 0x0 pnp 00:01: add mem 0xfed19000-0xfed19fff flags 0x0 pnp 00:01: add mem 0xfed1c000-0xfed1ffff flags 0x0 pnp 00:01: add mem 0xfed20000-0xfed3ffff flags 0x0 pnp 00:01: add mem 0xfed45000-0xfed99fff flags 0x0 pnp 00:01: add mem 0xc0000-0xdffff flags 0x0 pnp 00:01: add mem 0xe0000-0xfffff flags 0x0 pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x179 pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: parse allocated resources pnp 00:02: add io 0x0-0xf flags 0x1 pnp 00:02: add io 0x81-0x83 flags 0x1 pnp 00:02: add io 0x87-0x87 flags 0x1 pnp 00:02: add io 0x89-0x8b flags 0x1 pnp 00:02: add io 0x8f-0x8f flags 0x1 pnp 00:02: add io 0xc0-0xdf flags 0x1 pnp 00:02: add dma 4 flags 0x0 pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: parse allocated resources pnp 00:03: add io 0x70-0x71 flags 0x1 pnp 00:03: add io 0x74-0x77 flags 0x1 pnp 00:03: add irq 8 flags 0x1 pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: parse allocated resources pnp 00:04: add io 0xf0-0xf0 flags 0x1 pnp 00:04: add irq 13 flags 0x1 pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: parse allocated resources pnp 00:05: add io 0x61-0x61 flags 0x1 pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: parse allocated resources pnp 00:06: add io 0x500-0x53f flags 0x1 pnp 00:06: add io 0x400-0x47f flags 0x1 pnp 00:06: add io 0x92-0x92 flags 0x1 pnp 00:06: add io 0x680-0x6ff flags 0x1 pnp 00:06: add io 0x10-0x1f flags 0x1 pnp 00:06: add io 0x72-0x73 flags 0x1 pnp 00:06: add io 0x80-0x80 flags 0x1 pnp 00:06: add io 0x84-0x86 flags 0x1 pnp 00:06: add io 0x88-0x88 flags 0x1 pnp 00:06: add io 0x8c-0x8e flags 0x1 pnp 00:06: add io 0x90-0x9f flags 0x1 pnp 00:06: PNP0c02: calling quirk_system_pci_resources+0x0/0x179 pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:07: parse allocated resources pnp 00:07: add mem 0xfed40000-0xfed44fff flags 0x0 pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x179 pnp 00:07: Plug and Play ACPI device, IDs PNP0c31 PNP0c02 (active) pnp 00:08: parse allocated resources pnp 00:08: add io 0x60-0x60 flags 0x1 pnp 00:08: add io 0x64-0x64 flags 0x1 pnp 00:08: PNP0c02: calling quirk_system_pci_resources+0x0/0x179 pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: parse allocated resources pnp 00:09: add io 0x3f0-0x3f5 flags 0x1 pnp 00:09: add io 0x3f0-0x3f0 flags 0x1 pnp 00:09: add irq 6 flags 0x1 pnp 00:09: add dma 2 flags 0x0 pnp 00:09: parse resource options pnp 00:09: dependent set 0 (preferred) io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1 pnp 00:09: dependent set 0 (preferred) io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1 pnp 00:09: dependent set 0 (preferred) irq 6 flags 0x1 pnp 00:09: dependent set 0 (preferred) dma 2 (bitmask 0x4) flags 0x0 pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:0a: parse allocated resources pnp 00:0a: add io 0x378-0x37f flags 0x1 pnp 00:0a: add io 0x778-0x77f flags 0x1 pnp 00:0a: add irq 7 flags 0x1 pnp 00:0a: add dma 0 flags 0x10000000 pnp 00:0a: parse resource options pnp 00:0a: dependent set 0 (preferred) io min 0x378 max 0x378 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 0 (preferred) io min 0x778 max 0x778 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 0 (preferred) irq 5 7 flags 0x1 pnp 00:0a: dependent set 0 (preferred) dma 1 3 (bitmask 0xa) flags 0x0 pnp 00:0a: dependent set 1 (preferred) io min 0x278 max 0x278 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 1 (preferred) io min 0x678 max 0x678 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 1 (preferred) irq 5 7 flags 0x1 pnp 00:0a: dependent set 1 (preferred) dma 1 3 (bitmask 0xa) flags 0x0 pnp 00:0a: dependent set 2 (preferred) io min 0x3bc max 0x3bc align 1 size 4 flags 0x1 pnp 00:0a: dependent set 2 (preferred) io min 0x7bc max 0x7bc align 1 size 4 flags 0x1 pnp 00:0a: dependent set 2 (preferred) irq 5 7 flags 0x1 pnp 00:0a: dependent set 2 (preferred) dma 1 3 (bitmask 0xa) flags 0x0 pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active) pnp 00:0b: parse allocated resources pnp 00:0b: add io 0x3f8-0x3ff flags 0x1 pnp 00:0b: add irq 4 flags 0x1 pnp 00:0b: parse resource options pnp 00:0b: dependent set 0 (preferred) io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1 pnp 00:0b: dependent set 0 (preferred) irq 4 flags 0x1 pnp 00:0b: dependent set 1 (preferred) io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1 pnp 00:0b: dependent set 1 (preferred) irq 4 flags 0x1 pnp 00:0b: dependent set 2 (preferred) io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1 pnp 00:0b: dependent set 2 (preferred) irq 3 flags 0x1 pnp 00:0b: dependent set 3 (preferred) io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1 pnp 00:0b: dependent set 3 (preferred) irq 3 flags 0x1 pnp 00:0b: dependent set 4 (functional) io min 0x100 max 0x3f8 align 8 size 8 flags 0x1 pnp 00:0b: dependent set 4 (functional) irq 1 3 4 5 6 7 8 10 11 12 13 14 15 flags 0x1 pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0c: parse allocated resources pnp 00:0c: add mem 0xfec00000-0xfec000ff flags 0x0 pnp 00:0c: Plug and Play ACPI device, IDs PNP0003 (active) pnp 00:0d: parse allocated resources pnp 00:0d: add mem 0xfed00000-0xfed003ff flags 0x0 pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active) pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 pnp: the driver 'system' has been registered system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved system 00:01: iomem range 0xc0000-0xdffff has been reserved system 00:01: iomem range 0xe0000-0xfffff could not be reserved system 00:01: driver attached system 00:06: ioport range 0x500-0x53f has been reserved system 00:06: ioport range 0x400-0x47f has been reserved system 00:06: ioport range 0x680-0x6ff has been reserved system 00:06: driver attached system 00:07: iomem range 0xfed40000-0xfed44fff has been reserved system 00:07: driver attached system 00:08: driver attached pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: 0x1000-0x1fff pci 0000:00:1c.0: MEM window: 0x90000000-0x901fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: 0x90300000-0x903fffff pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: 0x90400000-0x904fffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: 0x90500000-0x905fffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: 0x90600000-0x906fffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [1000, 1fff] bus: 01 index 1 mmio: [90000000, 901fffff] bus: 01 index 2 mmio: [0, 0] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [90300000, 903fffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [90400000, 904fffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 mmio: [0, 0] bus: 04 index 1 mmio: [90500000, 905fffff] bus: 04 index 2 mmio: [0, 0] bus: 04 index 3 mmio: [0, 0] bus: 05 index 0 mmio: [0, 0] bus: 05 index 1 mmio: [90600000, 906fffff] bus: 05 index 2 mmio: [0, 0] bus: 05 index 3 mmio: [0, 0] bus: 06 index 0 mmio: [0, 0] bus: 06 index 1 mmio: [0, 0] bus: 06 index 2 mmio: [0, 0] bus: 06 index 3 io port: [0, ffff] bus: 06 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 Freeing initrd memory: 2910k freed audit: initializing netlink socket (disabled) type=2000 audit(1220094455.516:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 4000 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10 pci 0000:00:1d.0: Performing full reset pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1d.1: Performing full reset pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1d.2: Performing full reset pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1d.3: Performing full reset pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: found MSI capability pci_express 0000:00:1c.4:pcie00: allocate port service pci_express 0000:00:1c.4:pcie02: allocate port service pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: found MSI capability pci_express 0000:00:1c.5:pcie00: allocate port service pci_express 0000:00:1c.5:pcie02: allocate port service vesafb: framebuffer at 0x80000000, mapped to 0xffffc20000a00000, using 3072k, total 7872k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pnp: the driver 'serial' has been registered 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 00:0b: driver attached serial 0000:01:00.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 0000:01:00.3: ttyS1 at I/O 0x1020 (irq = 18) is a 16550A brd: module loaded pnp: the driver 'i8042 kbd' has been registered pnp: the driver 'i8042 aux' has been registered pnp: the driver 'i8042 kbd' has been unregistered pnp: the driver 'i8042 aux' has been unregistered PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice pnp: the driver 'rtc_cmos' has been registered rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, hpet irqs rtc_cmos 00:03: driver attached cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered NET: Registered protocol family 17 rtc_cmos 00:03: setting system clock to 2008-08-30 11:07:36 UTC (1220094456) Freeing unused kernel memory: 368k freed No dock devices found. SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0x902c4000 port 0x902c4100 irq 506 ata2: SATA max UDMA/133 abar m1024@0x902c4000 port 0x902c4180 irq 506 ata3: SATA max UDMA/133 abar m1024@0x902c4000 port 0x902c4200 irq 506 ata4: SATA max UDMA/133 abar m1024@0x902c4000 port 0x902c4280 irq 506 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133 ata1.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: Optiarc DVD RW AD-7170S, 1.00, max UDMA/66 ata3.00: configured for UDMA/66 ata4: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5 scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7170S 1.00 PQ: 0 ANSI: 5 processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 > sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. udevd version 125 started Floppy drive(s): fd0 is 1.44M input: PC Speaker as /class/input/input0 FDC 0 is a post-1991 82077 ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported ehci_hcd 0000:00:1d.7: supports USB remote wakeup ehci_hcd 0000:00:1d.7: irq 23, io mem 0x902c4400 ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: default language 0x0409 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub USB Universal Host Controller Interface driver v3.0 e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. input: Power Button (FF) as /class/input/input1 ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 5: status 0501 change 0001 ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 7: status 0501 change 0001 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input2 pnp: the driver 'parport_pc' has been registered parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] ACPI: Sleep Button (CM) [SLPB] Uniform Multi-Platform E-IDE driver iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) hub 1-0:1.0: state 7 ports 8 chg 00a0 evt 0000 drivers/usb/core/inode.c: creating file '001' hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1d.7: port 5 low speed --> companion usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-rc5-usb ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 agpgart-intel 0000:00:00.0: Intel 945G Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller drivers/usb/core/inode.c: creating file '002' uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: detected 2 ports uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.0: Performing full reset uhci_hcd 0000:00:1d.0: supports USB remote wakeup uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080 usb usb2: default language 0x0409 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub parport0: Printer, HEWLETT-PACKARD PHOTOSMART P1100 parport_pc 00:0a: driver attached Driver 'sr' needs updating - please use bus_type methods ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1d.7: port 7 low speed --> companion sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 2:0:0:0: Attached scsi generic sg1 type 5 intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80 hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 drivers/usb/core/inode.c: creating file '001' usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-rc5-usb uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller drivers/usb/core/inode.c: creating file '003' uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.1: Performing full reset uhci_hcd 0000:00:1d.1: supports USB remote wakeup uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 usb usb3: default language 0x0409 usb usb3: uevent usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good hub 3-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27-rc5-usb uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller drivers/usb/core/inode.c: creating file '004' uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.2: Performing full reset uhci_hcd 0000:00:1d.2: supports USB remote wakeup uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb4: default language 0x0409 usb usb4: uevent usb usb4: usb_probe_device usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: uevent hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 4-0:1.0: trying to enable port power on non-switchable hub uhci_hcd 0000:00:1d.2: port 1 portsc 01ab,00 hub 4-0:1.0: port 1: status 0301 change 0003 drivers/usb/core/inode.c: creating file '001' usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27-rc5-usb uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 hub 4-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller drivers/usb/core/inode.c: creating file '005' uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: detected 2 ports uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.3: Performing full reset uhci_hcd 0000:00:1d.3: supports USB remote wakeup uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020 usb usb5: default language 0x0409 usb usb5: uevent usb usb5: usb_probe_device usb usb5: configuration #1 chosen from 1 choice usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: uevent hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good hub 5-0:1.0: trying to enable port power on non-switchable hub uhci_hcd 0000:00:1d.3: port 1 portsc 01ab,00 hub 5-0:1.0: port 1: status 0301 change 0003 usb 4-1: new low speed USB device using uhci_hcd and address 2 drivers/usb/core/inode.c: creating file '001' usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27-rc5-usb uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 usb 4-1: skipped 1 descriptor after interface usb 4-1: skipped 1 descriptor after interface usb 4-1: default language 0x0409 usb 4-1: uevent usb 4-1: usb_probe_device usb 4-1: configuration #1 chosen from 1 choice i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:01:00.0: setting latency timer to 64 piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01) PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x20b0-0x20b7 Probing IDE interface ide0... usb 4-1: adding 4-1:1.0 (config #1, interface 0) usb 4-1:1.0: uevent usb 4-1: adding 4-1:1.1 (config #1, interface 1) usb 4-1:1.1: uevent drivers/usb/core/inode.c: creating file '002' usb 4-1: New USB device found, idVendor=05a4, idProduct=9841 usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 4-1: Product: USB Compliant Keyboard hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000 hub 5-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s e1000e 0000:01:00.0: Warning: detected DSPD enabled in EEPROM usb 5-1: new low speed USB device using uhci_hcd and address 2 0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:76:04:ff:09 0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection 0000:01:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff usb 5-1: skipped 1 descriptor after interface usb 5-1: default language 0x0409 usb 5-1: uevent usb 5-1: usb_probe_device usb 5-1: configuration #1 chosen from 1 choice usb 5-1: adding 5-1:1.0 (config #1, interface 0) usb 5-1:1.0: uevent drivers/usb/core/inode.c: creating file '002' usb 5-1: New USB device found, idVendor=046d, idProduct=c50d usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: USB Receiver usb 5-1: Manufacturer: Logitech usbcore: registered new interface driver hiddev usbhid 4-1:1.0: usb_probe_interface usbhid 4-1:1.0: usb_probe_interface - got id input: USB Compliant Keyboard as /class/input/input3 uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 8, phase 4, 118 us input: USB HID v1.10 Keyboard [USB Compliant Keyboard] on usb-0000:00:1d.2-1 usbhid 4-1:1.1: usb_probe_interface usbhid 4-1:1.1: usb_probe_interface - got id input: USB Compliant Keyboard as /class/input/input4 uhci_hcd 0000:00:1d.2: reserve dev 2 ep82-INT, period 8, phase 4, 99 us input: USB HID v1.10 Device [USB Compliant Keyboard] on usb-0000:00:1d.2-1 usbhid 5-1:1.0: usb_probe_interface usbhid 5-1:1.0: usb_probe_interface - got id input: Logitech USB Receiver as /class/input/input5 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usb usb2: suspend_rh (auto-stop) usb usb3: suspend_rh (auto-stop) hda: LITE-ON DVD SOHD-16P9SV, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend usb usb2: suspend_rh hub 3-0:1.0: hub_suspend usb usb3: bus auto-suspend usb usb3: suspend_rh hda: ATAPI 63X DVD-ROM drive, 254kB Cache Adding 979924k swap on /dev/sda6. Priority:-1 extents:1 across:979924k EXT3 FS on dm-0, internal journal NET: Registered protocol family 10 lo: Disabled Privacy Extensions i2c-adapter i2c-0: lm85: Detected SMSC chip i2c-adapter i2c-0: lm85: Unrecognized version/stepping 0x68 Defaulting to Generic LM85. fuse init (API version 7.9) kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Bridge firewalling registered br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. device eth0 entered promiscuous mode ADDRCONF(NETDEV_UP): eth0: link is not ready 0000:01:00.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:01:00.0: eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready br0: port 1(eth0) entering learning state br0: topology change detected, propagating br0: port 1(eth0) entering forwarding state br0: no IPv6 routers present RPC: Registered udp transport module. RPC: Registered tcp transport module. eth0: no IPv6 routers present lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky device vbox0 entered promiscuous mode br0: port 2(vbox0) entering learning state br0: topology change detected, propagating br0: port 2(vbox0) entering forwarding state [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 118 us uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 8, phase 4, 118 us uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 8, phase 4, 118 us vbox0: no IPv6 routers present --Boundary-00=_VvVuIeArdxyf+6/ Content-Type: text/plain; charset="iso 8859-15"; name="dmesg_uhci-first" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg_uhci-first" Linux version 2.6.27-rc5-usb (root@faramir) (gcc version 4.3.1 (Debian 4.3.1-9) ) #68 SMP Sat Aug 30 15:57:37 CEST 2008 Command line: root=/dev/mapper/main-root ro vga=791 quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f674000 (usable) BIOS-e820: 000000007f674000 - 000000007f6e9000 (ACPI NVS) BIOS-e820: 000000007f6e9000 - 000000007f6ec000 (usable) BIOS-e820: 000000007f6ec000 - 000000007f6ff000 (ACPI data) BIOS-e820: 000000007f6ff000 - 000000007f700000 (usable) last_pfn = 0x7f700 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 007f600000 page 2M 007f600000 - 007f700000 page 4k kernel direct mapping tables up to 7f700000 @ 8000-c000 last_map_addr: 7f700000 end: 7f700000 RAMDISK: 37d18000 - 37fefb8e DMI 2.3 present. ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT 7F6FDE48, 0058 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: FACP 7F6FCF10, 0074 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: DSDT 7F6F7010, 4348 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: FACS 7F6E2C40, 0040 ACPI: APIC 7F6FCE10, 0078 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: WDDT 7F6F6F90, 0040 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: MCFG 7F6F6F10, 003C (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: ASF! 7F6FCD10, 00A6 (r32 INTEL D945GCZ FF9 MSFT 1000013) ACPI: HPET 7F6F6E90, 0038 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: SSDT 7F6FDC10, 01BC (r1 INTEL CpuPm FF9 MSFT 1000013) ACPI: SSDT 7F6FDA10, 0175 (r1 INTEL Cpu0Ist FF9 MSFT 1000013) ACPI: SSDT 7F6FD810, 0175 (r1 INTEL Cpu1Ist FF9 MSFT 1000013) ACPI: SSDT 7F6FD610, 0175 (r1 INTEL Cpu2Ist FF9 MSFT 1000013) ACPI: SSDT 7F6FD410, 0175 (r1 INTEL Cpu3Ist FF9 MSFT 1000013) ACPI: SSDT 7F6F6E10, 002F (r1 INTEL SetupVar FF9 MSFT 1000013) ACPI: TCPA 7F6E4D90, 0032 (r1 INTEL TIANO 2 MSFT 1000013) No NUMA configuration found Faking a node at 0000000000000000-000000007f700000 Bootmem setup node 0 0000000000000000-000000007f700000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [000000000000a000 - 0000000000019edf] pages 10 (6 early reservations) ==> bootmem [0000000000 - 007f700000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000074e4e0] TEXT DATA BSS ==> [0000200000 - 000074e4e0] #3 [0037d18000 - 0037fefb8e] RAMDISK ==> [0037d18000 - 0037fefb8e] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000fe680] 000fe680 [ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001200000-ffff8800031fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007f674 0: 0x0007f6e9 -> 0x0007f6ec 0: 0x0007f6ff -> 0x0007f700 On node 0 totalpages: 521751 DMA zone: 2474 pages, LIFO batch:0 DMA32 zone: 509660 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 2 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 000000007f674000 - 000000007f6e9000 PM: Registered nosave memory: 000000007f6ec000 - 000000007f6ff000 Allocating PCI resources starting at 80000000 (gap: 7f700000:80900000) PERCPU: Allocating 47648 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 512134 Policy zone: DMA32 Kernel command line: root=/dev/mapper/main-root ro vga=791 quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PM_TIMER Detected 3199.879 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2045500k/2087936k available (2287k kernel code, 41504k reserved, 1438k data, 368k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.75 BogoMIPS (lpj=12799516) Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) D CPU 3.20GHz stepping 07 Using local APIC timer interrupts. APIC timer calibration result 12499522 Detected 12.499 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6399.95 BogoMIPS (lpj=12799904) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM1) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Pentium(R) D CPU 3.20GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (12799.71 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 net_namespace: 1552 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support. PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.3: PME# supported from D0 D3hot D3cold pci 0000:01:00.3: PME# disabled pci 0000:01:00.4: PME# supported from D0 D3hot D3cold pci 0000:01:00.4: PME# disabled PCI: bridge 0000:00:1c.0 io port: [1000, 1fff] PCI: bridge 0000:00:1c.0 32bit mmio: [90000000, 901fffff] PCI: bridge 0000:00:1c.2 32bit mmio: [90300000, 903fffff] PCI: bridge 0000:00:1c.3 32bit mmio: [90400000, 904fffff] PCI: bridge 0000:00:1c.4 32bit mmio: [90500000, 905fffff] PCI: bridge 0000:00:1c.5 32bit mmio: [90600000, 906fffff] pci 0000:00:1e.0: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: parse allocated resources pnp 00:00: add io 0xcf8-0xcff flags 0x1 pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: parse allocated resources pnp 00:01: add mem 0xf0000000-0xf3ffffff flags 0x0 pnp 00:01: add mem 0xfed13000-0xfed13fff flags 0x0 pnp 00:01: add mem 0xfed14000-0xfed17fff flags 0x0 pnp 00:01: add mem 0xfed18000-0xfed18fff flags 0x0 pnp 00:01: add mem 0xfed19000-0xfed19fff flags 0x0 pnp 00:01: add mem 0xfed1c000-0xfed1ffff flags 0x0 pnp 00:01: add mem 0xfed20000-0xfed3ffff flags 0x0 pnp 00:01: add mem 0xfed45000-0xfed99fff flags 0x0 pnp 00:01: add mem 0xc0000-0xdffff flags 0x0 pnp 00:01: add mem 0xe0000-0xfffff flags 0x0 pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x179 pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: parse allocated resources pnp 00:02: add io 0x0-0xf flags 0x1 pnp 00:02: add io 0x81-0x83 flags 0x1 pnp 00:02: add io 0x87-0x87 flags 0x1 pnp 00:02: add io 0x89-0x8b flags 0x1 pnp 00:02: add io 0x8f-0x8f flags 0x1 pnp 00:02: add io 0xc0-0xdf flags 0x1 pnp 00:02: add dma 4 flags 0x0 pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: parse allocated resources pnp 00:03: add io 0x70-0x71 flags 0x1 pnp 00:03: add io 0x74-0x77 flags 0x1 pnp 00:03: add irq 8 flags 0x1 pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: parse allocated resources pnp 00:04: add io 0xf0-0xf0 flags 0x1 pnp 00:04: add irq 13 flags 0x1 pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: parse allocated resources pnp 00:05: add io 0x61-0x61 flags 0x1 pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: parse allocated resources pnp 00:06: add io 0x500-0x53f flags 0x1 pnp 00:06: add io 0x400-0x47f flags 0x1 pnp 00:06: add io 0x92-0x92 flags 0x1 pnp 00:06: add io 0x680-0x6ff flags 0x1 pnp 00:06: add io 0x10-0x1f flags 0x1 pnp 00:06: add io 0x72-0x73 flags 0x1 pnp 00:06: add io 0x80-0x80 flags 0x1 pnp 00:06: add io 0x84-0x86 flags 0x1 pnp 00:06: add io 0x88-0x88 flags 0x1 pnp 00:06: add io 0x8c-0x8e flags 0x1 pnp 00:06: add io 0x90-0x9f flags 0x1 pnp 00:06: PNP0c02: calling quirk_system_pci_resources+0x0/0x179 pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:07: parse allocated resources pnp 00:07: add mem 0xfed40000-0xfed44fff flags 0x0 pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x179 pnp 00:07: Plug and Play ACPI device, IDs PNP0c31 PNP0c02 (active) pnp 00:08: parse allocated resources pnp 00:08: add io 0x60-0x60 flags 0x1 pnp 00:08: add io 0x64-0x64 flags 0x1 pnp 00:08: PNP0c02: calling quirk_system_pci_resources+0x0/0x179 pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: parse allocated resources pnp 00:09: add io 0x3f0-0x3f5 flags 0x1 pnp 00:09: add io 0x3f0-0x3f0 flags 0x1 pnp 00:09: add irq 6 flags 0x1 pnp 00:09: add dma 2 flags 0x0 pnp 00:09: parse resource options pnp 00:09: dependent set 0 (preferred) io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1 pnp 00:09: dependent set 0 (preferred) io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1 pnp 00:09: dependent set 0 (preferred) irq 6 flags 0x1 pnp 00:09: dependent set 0 (preferred) dma 2 (bitmask 0x4) flags 0x0 pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:0a: parse allocated resources pnp 00:0a: add io 0x378-0x37f flags 0x1 pnp 00:0a: add io 0x778-0x77f flags 0x1 pnp 00:0a: add irq 7 flags 0x1 pnp 00:0a: add dma 0 flags 0x10000000 pnp 00:0a: parse resource options pnp 00:0a: dependent set 0 (preferred) io min 0x378 max 0x378 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 0 (preferred) io min 0x778 max 0x778 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 0 (preferred) irq 5 7 flags 0x1 pnp 00:0a: dependent set 0 (preferred) dma 1 3 (bitmask 0xa) flags 0x0 pnp 00:0a: dependent set 1 (preferred) io min 0x278 max 0x278 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 1 (preferred) io min 0x678 max 0x678 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 1 (preferred) irq 5 7 flags 0x1 pnp 00:0a: dependent set 1 (preferred) dma 1 3 (bitmask 0xa) flags 0x0 pnp 00:0a: dependent set 2 (preferred) io min 0x3bc max 0x3bc align 1 size 4 flags 0x1 pnp 00:0a: dependent set 2 (preferred) io min 0x7bc max 0x7bc align 1 size 4 flags 0x1 pnp 00:0a: dependent set 2 (preferred) irq 5 7 flags 0x1 pnp 00:0a: dependent set 2 (preferred) dma 1 3 (bitmask 0xa) flags 0x0 pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active) pnp 00:0b: parse allocated resources pnp 00:0b: add io 0x3f8-0x3ff flags 0x1 pnp 00:0b: add irq 4 flags 0x1 pnp 00:0b: parse resource options pnp 00:0b: dependent set 0 (preferred) io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1 pnp 00:0b: dependent set 0 (preferred) irq 4 flags 0x1 pnp 00:0b: dependent set 1 (preferred) io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1 pnp 00:0b: dependent set 1 (preferred) irq 4 flags 0x1 pnp 00:0b: dependent set 2 (preferred) io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1 pnp 00:0b: dependent set 2 (preferred) irq 3 flags 0x1 pnp 00:0b: dependent set 3 (preferred) io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1 pnp 00:0b: dependent set 3 (preferred) irq 3 flags 0x1 pnp 00:0b: dependent set 4 (functional) io min 0x100 max 0x3f8 align 8 size 8 flags 0x1 pnp 00:0b: dependent set 4 (functional) irq 1 3 4 5 6 7 8 10 11 12 13 14 15 flags 0x1 pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0c: parse allocated resources pnp 00:0c: add mem 0xfec00000-0xfec000ff flags 0x0 pnp 00:0c: Plug and Play ACPI device, IDs PNP0003 (active) pnp 00:0d: parse allocated resources pnp 00:0d: add mem 0xfed00000-0xfed003ff flags 0x0 pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active) pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 pnp: the driver 'system' has been registered system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved system 00:01: iomem range 0xc0000-0xdffff has been reserved system 00:01: iomem range 0xe0000-0xfffff could not be reserved system 00:01: driver attached system 00:06: ioport range 0x500-0x53f has been reserved system 00:06: ioport range 0x400-0x47f has been reserved system 00:06: ioport range 0x680-0x6ff has been reserved system 00:06: driver attached system 00:07: iomem range 0xfed40000-0xfed44fff has been reserved system 00:07: driver attached system 00:08: driver attached pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: 0x1000-0x1fff pci 0000:00:1c.0: MEM window: 0x90000000-0x901fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: 0x90300000-0x903fffff pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: 0x90400000-0x904fffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: 0x90500000-0x905fffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: 0x90600000-0x906fffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [1000, 1fff] bus: 01 index 1 mmio: [90000000, 901fffff] bus: 01 index 2 mmio: [0, 0] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [90300000, 903fffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [90400000, 904fffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 mmio: [0, 0] bus: 04 index 1 mmio: [90500000, 905fffff] bus: 04 index 2 mmio: [0, 0] bus: 04 index 3 mmio: [0, 0] bus: 05 index 0 mmio: [0, 0] bus: 05 index 1 mmio: [90600000, 906fffff] bus: 05 index 2 mmio: [0, 0] bus: 05 index 3 mmio: [0, 0] bus: 06 index 0 mmio: [0, 0] bus: 06 index 1 mmio: [0, 0] bus: 06 index 2 mmio: [0, 0] bus: 06 index 3 io port: [0, ffff] bus: 06 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 Freeing initrd memory: 2910k freed audit: initializing netlink socket (disabled) type=2000 audit(1220104992.524:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 4000 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10 pci 0000:00:1d.0: Performing full reset pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1d.1: Performing full reset pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1d.2: Performing full reset pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 pci 0000:00:1d.3: Performing full reset pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: found MSI capability pci_express 0000:00:1c.4:pcie00: allocate port service pci_express 0000:00:1c.4:pcie02: allocate port service pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: found MSI capability pci_express 0000:00:1c.5:pcie00: allocate port service pci_express 0000:00:1c.5:pcie02: allocate port service vesafb: framebuffer at 0x80000000, mapped to 0xffffc20000a00000, using 3072k, total 7872k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pnp: the driver 'serial' has been registered 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 00:0b: driver attached serial 0000:01:00.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 0000:01:00.3: ttyS1 at I/O 0x1020 (irq = 18) is a 16550A brd: module loaded pnp: the driver 'i8042 kbd' has been registered pnp: the driver 'i8042 aux' has been registered pnp: the driver 'i8042 kbd' has been unregistered pnp: the driver 'i8042 aux' has been unregistered PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice pnp: the driver 'rtc_cmos' has been registered rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, hpet irqs rtc_cmos 00:03: driver attached cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered NET: Registered protocol family 17 rtc_cmos 00:03: setting system clock to 2008-08-30 14:03:13 UTC (1220104993) Freeing unused kernel memory: 368k freed No dock devices found. SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0x902c4000 port 0x902c4100 irq 506 ata2: SATA max UDMA/133 abar m1024@0x902c4000 port 0x902c4180 irq 506 ata3: SATA max UDMA/133 abar m1024@0x902c4000 port 0x902c4200 irq 506 ata4: SATA max UDMA/133 abar m1024@0x902c4000 port 0x902c4280 irq 506 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133 ata1.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: Optiarc DVD RW AD-7170S, 1.00, max UDMA/66 ata3.00: configured for UDMA/66 ata4: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5 scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7170S 1.00 PQ: 0 ANSI: 5 processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 > sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. udevd version 125 started Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: detected 2 ports uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.0: Performing full reset uhci_hcd 0000:00:1d.0: supports USB remote wakeup uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080 usb usb1: default language 0x0409 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 2ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input1 Uniform Multi-Platform E-IDE driver pnp: the driver 'parport_pc' has been registered parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] ACPI: Sleep Button (CM) [SLPB] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 drivers/usb/core/inode.c: creating file '001' usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-rc5-usb uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller drivers/usb/core/inode.c: creating file '002' uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.1: Performing full reset uhci_hcd 0000:00:1d.1: supports USB remote wakeup uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 usb usb2: default language 0x0409 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 parport0: Printer, HEWLETT-PACKARD PHOTOSMART P1100 parport_pc 00:0a: driver attached input: PC Speaker as /class/input/input2 hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 drivers/usb/core/inode.c: creating file '001' usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-rc5-usb uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller drivers/usb/core/inode.c: creating file '003' uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.2: Performing full reset uhci_hcd 0000:00:1d.2: supports USB remote wakeup uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb3: default language 0x0409 usb usb3: uevent usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good hub 3-0:1.0: trying to enable port power on non-switchable hub e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) uhci_hcd 0000:00:1d.2: port 1 portsc 01ab,00 hub 3-0:1.0: port 1: status 0301 change 0003 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 2:0:0:0: Attached scsi generic sg1 type 5 intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000 drivers/usb/core/inode.c: creating file '001' hub 3-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27-rc5-usb uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 agpgart-intel 0000:00:00.0: Intel 945G Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller drivers/usb/core/inode.c: creating file '004' uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: detected 2 ports uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:1d.3: Performing full reset uhci_hcd 0000:00:1d.3: supports USB remote wakeup uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020 usb usb4: default language 0x0409 usb usb4: uevent usb usb4: usb_probe_device usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: uevent hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 4-0:1.0: trying to enable port power on non-switchable hub usb 3-1: new low speed USB device using uhci_hcd and address 2 uhci_hcd 0000:00:1d.3: port 1 portsc 01ab,00 hub 4-0:1.0: port 1: status 0301 change 0003 drivers/usb/core/inode.c: creating file '001' usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27-rc5-usb uhci_hcd usb usb4: SerialNumber: 0000:00:1d.3 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller drivers/usb/core/inode.c: creating file '005' ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported ehci_hcd 0000:00:1d.7: supports USB remote wakeup ehci_hcd 0000:00:1d.7: irq 23, io mem 0x902c4400 ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci: waiting for khubd_idle usb 3-1: skipped 1 descriptor after interface usb 3-1: skipped 1 descriptor after interface usb 3-1: default language 0x0409 usb 3-1: uevent usb 3-1: usb_probe_device usb 3-1: configuration #1 chosen from 1 choice usb 3-1: adding 3-1:1.0 (config #1, interface 0) usb 3-1:1.0: uevent usb 3-1: adding 3-1:1.1 (config #1, interface 1) usb 3-1:1.1: uevent drivers/usb/core/inode.c: creating file '002' usb 3-1: New USB device found, idVendor=05a4, idProduct=9841 usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 3-1: Product: USB Compliant Keyboard hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 hub 4-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: skipped 1 descriptor after interface usb 4-1: default language 0x0409 usb 4-1: uevent usb 4-1: usb_probe_device usb 4-1: configuration #1 chosen from 1 choice usb 4-1: adding 4-1:1.0 (config #1, interface 0) usb 4-1:1.0: uevent drivers/usb/core/inode.c: creating file '002' usb 4-1: New USB device found, idVendor=046d, idProduct=c50d usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: USB Receiver usb 4-1: Manufacturer: Logitech ehci: got khubd_idle, resume ehci_run usbcore: registered new interface driver hiddev usbhid 3-1:1.0: usb_probe_interface usbhid 3-1:1.0: usb_probe_interface - got id usb 3-1: uhci_result_common: failed with status 440000 usb 3-1: uhci_result_common: failed with status 440000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: default language 0x0409 usb usb5: uevent usb usb5: usb_probe_device usb usb5: configuration #1 chosen from 1 choice usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: uevent hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 20ms hub 5-0:1.0: local power source is good hub 5-0:1.0: trying to enable port power on non-switchable hub usb 3-1: uhci_result_common: failed with status 440000 usb 3-1: uhci_result_common: failed with status 440000 usb 3-1: uhci_result_common: failed with status 440000 usbhid 3-1:1.1: usb_probe_interface usbhid 3-1:1.1: usb_probe_interface - got id usb 3-1: uhci_result_common: failed with status 440000 usb 3-1: uhci_result_common: failed with status 440000 usb 3-1: uhci_result_common: failed with status 440000 hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:1d.2: port 1 portsc 008a,00 hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s usb 3-1: uhci_result_common: failed with status 440000 usb 3-1: uhci_result_common: failed with status 440000 ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001403 POWER sig=k CSC CONNECT hub 5-0:1.0: port 5: status 0501 change 0001 ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001403 POWER sig=k CSC CONNECT hub 5-0:1.0: port 7: status 0501 change 0001 hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 usb 3-1: USB disconnect, address 2 usb 3-1: unregistering device usb 3-1: usb_disable_device nuking all URBs usb 3-1: unregistering interface 3-1:1.0 usb 3-1:1.0: uevent usb 3-1: unregistering interface 3-1:1.1 usb 3-1:1.1: uevent usb 3-1: uevent hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 hub 4-0:1.0: port 1, status 0100, change 0003, 12 Mb/s usbhid 4-1:1.0: usb_probe_interface usbhid 4-1:1.0: usb_probe_interface - got id usb 4-1: uhci_result_common: failed with status 440000 usb 4-1: uhci_result_common: failed with status 440000 usb 4-1: uhci_result_common: failed with status 440000 usb 4-1: uhci_result_common: failed with status 440000 usb 4-1: uhci_result_common: failed with status 440000 drivers/usb/core/inode.c: creating file '001' usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27-rc5-usb ehci_hcd usb usb5: SerialNumber: 0000:00:1d.7 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 usb usb1: suspend_rh (auto-stop) usb usb2: suspend_rh (auto-stop) hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 usb 4-1: USB disconnect, address 2 usb 4-1: unregistering device usb 4-1: usb_disable_device nuking all URBs usb 4-1: unregistering interface 4-1:1.0 usb 4-1:1.0: uevent usb 4-1: uevent hub 5-0:1.0: state 7 ports 8 chg 00a0 evt 0000 hub 5-0:1.0: port 5, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1d.7: port 5 low speed --> companion piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01) PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x20b0-0x20b7 Probing IDE interface ide0... ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC hub 5-0:1.0: port 7, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1d.7: port 7 low speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC hub 5-0:1.0: state 7 ports 8 chg 0000 evt fe80 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:1d.2: port 1 portsc 01a3,00 hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 usb 3-1: new low speed USB device using uhci_hcd and address 3 usb 3-1: skipped 1 descriptor after interface usb 3-1: skipped 1 descriptor after interface usb 3-1: default language 0x0409 usb 3-1: uevent usb 3-1: usb_probe_device usb 3-1: configuration #1 chosen from 1 choice usb 3-1: adding 3-1:1.0 (config #1, interface 0) usb 3-1:1.0: uevent usbhid 3-1:1.0: usb_probe_interface usbhid 3-1:1.0: usb_probe_interface - got id input: USB Compliant Keyboard as /class/input/input3 uhci_hcd 0000:00:1d.2: reserve dev 3 ep81-INT, period 8, phase 4, 118 us input: USB HID v1.10 Keyboard [USB Compliant Keyboard] on usb-0000:00:1d.2-1 usb 3-1: adding 3-1:1.1 (config #1, interface 1) usb 3-1:1.1: uevent usbhid 3-1:1.1: usb_probe_interface usbhid 3-1:1.1: usb_probe_interface - got id input: USB Compliant Keyboard as /class/input/input4 hda: LITE-ON DVD SOHD-16P9SV, ATAPI CD/DVD-ROM drive uhci_hcd 0000:00:1d.2: reserve dev 3 ep82-INT, period 8, phase 4, 99 us input: USB HID v1.10 Device [USB Compliant Keyboard] on usb-0000:00:1d.2-1 drivers/usb/core/inode.c: creating file '003' usb 3-1: New USB device found, idVendor=05a4, idProduct=9841 usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 3-1: Product: USB Compliant Keyboard hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:1d.3: port 1 portsc 01a3,00 hub 4-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 usb 4-1: new low speed USB device using uhci_hcd and address 3 usb 4-1: skipped 1 descriptor after interface usb 4-1: default language 0x0409 usb 4-1: uevent usb 4-1: usb_probe_device usb 4-1: configuration #1 chosen from 1 choice usb 4-1: adding 4-1:1.0 (config #1, interface 0) usb 4-1:1.0: uevent usbhid 4-1:1.0: usb_probe_interface usbhid 4-1:1.0: usb_probe_interface - got id hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend usb usb1: suspend_rh hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend usb usb2: suspend_rh input: Logitech USB Receiver as /class/input/input5 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1 drivers/usb/core/inode.c: creating file '003' usb 4-1: New USB device found, idVendor=046d, idProduct=c50d usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: USB Receiver usb 4-1: Manufacturer: Logitech hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:01:00.0: setting latency timer to 64 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 e1000e 0000:01:00.0: Warning: detected DSPD enabled in EEPROM 0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:76:04:ff:09 0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection 0000:01:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff hda: ATAPI 63X DVD-ROM drive, 254kB Cache hub 5-0:1.0: hub_suspend usb usb5: bus auto-suspend ehci_hcd 0000:00:1d.7: suspend root hub Adding 979924k swap on /dev/sda6. Priority:-1 extents:1 across:979924k EXT3 FS on dm-0, internal journal NET: Registered protocol family 10 lo: Disabled Privacy Extensions i2c-adapter i2c-0: lm85: Detected SMSC chip i2c-adapter i2c-0: lm85: Unrecognized version/stepping 0x68 Defaulting to Generic LM85. fuse init (API version 7.9) kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Bridge firewalling registered br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. device eth0 entered promiscuous mode ADDRCONF(NETDEV_UP): eth0: link is not ready 0000:01:00.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:01:00.0: eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready br0: port 1(eth0) entering learning state br0: topology change detected, propagating br0: port 1(eth0) entering forwarding state RPC: Registered udp transport module. RPC: Registered tcp transport module. br0: no IPv6 routers present eth0: no IPv6 routers present lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky device vbox0 entered promiscuous mode br0: port 2(vbox0) entering learning state br0: topology change detected, propagating br0: port 2(vbox0) entering forwarding state [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 uhci_hcd 0000:00:1d.3: reserve dev 3 ep81-INT, period 8, phase 4, 118 us uhci_hcd 0000:00:1d.3: release dev 3 ep81-INT, period 8, phase 4, 118 us uhci_hcd 0000:00:1d.3: reserve dev 3 ep81-INT, period 8, phase 4, 118 us vbox0: no IPv6 routers present --Boundary-00=_VvVuIeArdxyf+6/-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/