Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753503AbYJBIYb (ORCPT ); Thu, 2 Oct 2008 04:24:31 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752429AbYJBIYX (ORCPT ); Thu, 2 Oct 2008 04:24:23 -0400 Received: from mail.ku-gbr.de ([81.3.11.18]:54489 "EHLO ku-gbr.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751939AbYJBIYW (ORCPT ); Thu, 2 Oct 2008 04:24:22 -0400 X-Greylist: delayed 2943 seconds by postgrey-1.27 at vger.kernel.org; Thu, 02 Oct 2008 04:24:21 EDT Date: Wed, 1 Oct 2008 21:30:13 +0200 From: Konstantin Kletschke To: linux-kernel@vger.kernel.org Subject: Re: SATA Cold Boot problems on >2.6.25 with NV Message-ID: <20081001193013.GA6565@anita.doom> Mail-Followup-To: linux-kernel@vger.kernel.org References: <48DA0A2C.8010008@kernel.org> <20080924105943.GB2094@anita> <20080925081848.GB2305@anita> <48DEA40D.40709@kernel.org> <20080930081257.GB18961@anita.doom> <48E232FC.1090902@kernel.org> <20080930151622.GC18961@anita.doom> <48E25831.4030505@kernel.org> <20081001073817.GA3098@anita.doom> <48E32C93.8060201@kernel.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <48E32C93.8060201@kernel.org> User-Agent: Mutt/1.5.18 (2008-05-17) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4040 Lines: 102 Well, this way the Situation is the following: TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 2008 io scheduler noop registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device Linux agpgart interface v0.103 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22 forcedeth 0000:00:05.0: PCI INT A -> Link[LKLN] -> GSI 22 (level, low) -> IRQ 22 forcedeth 0000:00:05.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr Switched to high resolution mode on CPU 0 forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:13:8f:fd:f9:26 forcedeth 0000:00:05.0: csum timirq lnktim desc-v2 netconsole: local port 6665 netconsole: local IP 10.10.0.1 netconsole: interface eth0 netconsole: remote port 6666 netconsole: remote IP 10.10.0.18 netconsole: remote ethernet address 00:22:15:68:2c:eb netconsole: device eth0 not up yet, forcing it eth0: no link during initialization. eth0: link up. console [netcon0] enabled netconsole: network logging started Driver 'sd' needs updating - please use bus_type methods sata_nv 0000:00:0a.0: version 3.5 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21 sata_nv 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 21 (level, low) -> IRQ 21 sata_nv 0000:00:0a.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xd800 irq 21 ata2: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xd808 irq 21 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: SAMSUNG HD753LJ, 1AA01106, max UDMA7 ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: [sda] Attached SCSI disk PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 TCP cubic registered NET: Registered protocol family 17 XFS mounting filesystem sda1 Ending clean XFS mount for filesystem: sda1 VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 220k freed Then this continues: ata2: EH pending after 5 tries, giving up ata2: EH complete ata2: EH pending after 5 tries, giving up ata2: EH complete ata2: EH complete ata2: EH complete ata2: EH complete ata2: EH complete ata2: EH complete ata2: EH complete ata2: EH complete ata2: EH complete ata2: EH complete Rebooting is not possible (seldom it is possible though), most often it yields into the BIOS not recognizing the disk after the reset anymore. The shutdown (the system is headless regularly and I wait for hearing the BIOS beep) lasts very long (before it waits for the disk or finds no OS). Sadly I have no time to put a monitor onto it, if further investigations are required I can take care of this friday. Kind Regards and happy hacking, Konsti -- GPG KeyID EF62FCEF Fingerprint: 13C9 B16B 9844 EC15 CC2E A080 1E69 3FDA EF62 FCEF -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/