Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753831AbYJCXOe (ORCPT ); Fri, 3 Oct 2008 19:14:34 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753385AbYJCXOX (ORCPT ); Fri, 3 Oct 2008 19:14:23 -0400 Received: from smtp119.sbc.mail.sp1.yahoo.com ([69.147.64.92]:31982 "HELO smtp119.sbc.mail.sp1.yahoo.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1753076AbYJCXOV (ORCPT ); Fri, 3 Oct 2008 19:14:21 -0400 X-YMail-OSG: SVhX.xgVM1mE07g1HFw7PxFpnJEzSVCPXcDP6ms62ZOfr8SPE2yaBQvTIcumrdeK9wRuECXRxpbVxmkfil7djks87xUAptmkn9b7TNnw09ygL4kzXT9oAPSmq20xaUgPAG0dsMKLDa7Ehip39pFqOCVXTf_MsvLKLRk7tFfKzEPvBcte914EI8fB7eY2HIVASY5ipVDQMXwKsEVga0Z7ptE- X-Yahoo-Newman-Property: ymail-3 Subject: Re: [ANNOUNCE]: ConfigFS enabled Generic Target Mode and iSCSI Target Stack on v2.6.27-rc7 From: "Nicholas A. Bellinger" To: linux-iscsi-target-dev@googlegroups.com Cc: Vladislav Bolkhovitin , FUJITA Tomonori , Mike Christie , linux-scsi , iet-dev , Greg KH , Jerome Martin , LKML , James Bottomley , SCST-Devel , Joel Becker , "H. Peter Anvin" In-Reply-To: <1222982972.15764.118.camel@haakon2.linux-iscsi.org> References: <1222716101.4296.41.camel@haakon2.linux-iscsi.org> <48E3B529.4060406@vlnb.net> <1222907050.15764.56.camel@haakon2.linux-iscsi.org> <48E4FE3F.2080707@vlnb.net> <1222982972.15764.118.camel@haakon2.linux-iscsi.org> Content-Type: text/plain Date: Fri, 03 Oct 2008 16:14:17 -0700 Message-Id: <1223075657.15764.178.camel@haakon2.linux-iscsi.org> Mime-Version: 1.0 X-Mailer: Evolution 2.22.3.1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9042 Lines: 212 On Thu, 2008-10-02 at 14:29 -0700, Nicholas A. Bellinger wrote: > On Thu, 2008-10-02 at 21:00 +0400, Vladislav Bolkhovitin wrote: > > Nicholas A. Bellinger wrote: > > >>> # Add some more HBA and storage Objects > > >>> target:~# mkdir -p $TARGET/fileio_0/file_object > > >>> target:~# mkdir -p $TARGET/rd_mcp_0/ramdisk0 > > >>> target:~# mkdir -p $TARGET/rd_dr_0/ramdisk0 > > >>> > > >>> target:~# mkdir -p $TARGET/pscsi_0/sdd > > >>> target:~# echo scsi_channel_id=0,scsi_target_id=3,scsi_lun_id=0 > $TARGET/pscsi_0/sdd/dev_control > > >>> target:~# echo 1 > $TARGET/pscsi_0/sdd/dev_enable > > >>> > > >>> # Now, create LUN 1 and another Port Symlink to a new device on the same $IQN/tpgt_1 > > >>> mkdir -p "$FABRIC/$DEF_IQN/tpgt_1/lun/lun_1" > > >>> # Create the iSCSI Target Port Mapping for $DEF_IN/tpgt_1 LUN 1 > > >>> # to lvm_test0 and give it the port symbolic name of lio_east_port > > >>> ln -s $TARGET/pscsi_0/sdd/ "$FABRIC/$DEF_IQN/tpgt_1/lun/lun_1/lio_east_port" > > >>> > > >>> target:~# tree $CONFIGFS > > >>> /sys/kernel/config/ > > >>> `-- target > > >>> |-- core > > >>> | |-- fileio_0 > > >>> | | |-- file_object > > >>> | | | |-- dev_control > > >>> | | | |-- dev_enable > > >>> | | | `-- dev_info > > >>> | | `-- hba_info > > >>> | |-- iblock_0 > > >>> | | |-- hba_info > > >>> | | `-- lvm_test0 > > >>> | | |-- dev_control > > >>> | | |-- dev_enable > > >>> | | `-- dev_info > > >>> | |-- pscsi_0 > > >>> | | |-- hba_info > > >>> | | `-- sdd > > >>> | | |-- dev_control > > >>> | | |-- dev_enable > > >>> | | `-- dev_info > > >>> | |-- rd_dr_0 > > >>> | | |-- hba_info > > >>> | | `-- ramdisk0 > > >>> | | |-- dev_control > > >>> | | |-- dev_enable > > >>> | | `-- dev_info > > >>> | `-- rd_mcp_0 > > >>> | |-- hba_info > > >>> | `-- ramdisk0 > > >>> | |-- dev_control > > >>> | |-- dev_enable > > >>> | `-- dev_info > > >>> |-- iscsi > > >>> | |-- iqn.2003-01.org.linux-iscsi.target.i686:sn.e475ed6fcdd0 > > >>> | | `-- tpgt_1 > > >>> | | |-- lun > > >>> | | | |-- lun_0 > > >>> | | | | |-- lio_west_port -> ../../../../../../target/core/iblock_0/lvm_test0 > > >>> | | | | |-- port_control > > >>> | | | | `-- port_info > > >>> | | | `-- lun_1 > > >>> | | | |-- lio_east_port -> ../../../../../../target/core/pscsi_0/sdd > > >>> | | | |-- port_control > > >>> | | | `-- port_info > > >>> | | |-- np > > >>> | | | `-- 172.16.201.137:3260 > > >>> | | | `-- portal_info > > >>> | | |-- tpg_control > > >>> | | `-- tpg_enable > > >>> | `-- lio_version > > >>> `-- version > > >>> > > >>> 22 directories, 29 files > > >> It's good, I like it. The only thing concerns me that, considering how > > >> much time *I* spent to understand it, for an average user understanding > > >> it can be an unbearable nightmare ;) > > >> > > > > > > Well, the idea is not necessarily making the configfs interface the > > > easiest to use in the world by user directly through $CONFIGFS, but to > > > make the CLI scripts that speak $CONFIGFS/target CLI, and of course the > > > actual UIs for user that interact with generic target core and > > > $FABRIC_MODs be as simple and elegent as possible. > > > > > > That is what I believe the balance that a configfs enabled generic > > > target core provides to both the $CONFIGFS/target API and to $FABRIC_MOD > > > maintainers looking to port their code to use a generic control > > > infrastructure. :-) > > > > > >> In a few days I'll write a proposed configfs hierarchy for existing SCST > > >> /proc interface. > > > > > > Sounds good! Please let me know if you have questions. > > > > There's one unsolved problem. As I've already written, SCST core needs > > an ability to provide to user space a large amount of data, which may > > not fit to a single page. > > > > A list of connected initiators ("sessions" > > file in /proc), for instance. Each initiator in that list has a number > > of attributes: initiator name, target template name, count of > > outstanding commands, etc. The logical way for that would be to create a > > subdirectory for each initiator, like: > > > > /sys/kernel/config/ > > `-- target > > `-- sessions > > `-- session1 > > | |-- initiator_name > > | |-- template_name > > | `-- commands > > | > > `-- session2 > > |-- initiator_name > > `-- template_name > > `-- commands > > > > The the Initiator Port ACLs need to go > under /sys/kernel/config/target/$FABRIC because the struct fabric_acl * > will always contain fabric dependent config items. For example, Since > these struct fabric_acl_t do *NOT* symlink directly back to > target_core_mod under /sys/kernel/config/target/core/$HBA/$DEV, but to > fabric_lun_t (iscsi_lun_t in my case) to Symlink to > a /sys/kernel/config/target/core/$HBA/$DEV that has been registered with > the generic target configfs infrastructure. > > Here is what I am thinking wrt /sys/kernel/config/target/iscsi and iSCSI > Initiator Node ACLs to iSCSI Portal Groups and iSCSI LUNs attached to > those Portal Groups. There are two cases: > > *) The production case with with user creating those ACLs under $FABRIC > (which is what I will focus on now). > > * And "Demo Mode" case where any Initiator logging into > $FABRIC/$ENDPOINT/$PORTAL can have access to all > $FABRIC/$ENDPOINT/lun/lun_*/*my_ports* > > The production ACL case would look like: > > export CONFIGFS=/sys/kernel/config/ > export TARGET=/sys/kernel/config/target/core/ > export FABRIC=/sys/kernel/config/target/iscsi/ > > TARGET_IQN=iqn.2003-01.org.linux-iscsi.ps3-cell.ppc64:sn.f8f651bd5fec > INITIATOR_IQN=iqn.1993-08.org.debian:01.f82074ca555f > > > > # Create the LIO-target endpoint > mkdir -p "$FABRIC/$TARGET_IQN/tpgt_1/np/172.16.201.137:3260" > mkdir -p "$FABRIC/$TARGET_IQN/tpgt_1/lun/lun_0" > > > > # Create the Initiator ACL under $TARGET_IQN/tpgt_1 > mkdir -p $"FABRIC/$TARGET_IQN/tpgt_1/initiators/$INITIATOR_IQN" > # Allow $INITIATOR_IQN access to tpgt_1/lun/lun_0/ > ln -s "$FABRIC/$TARGET_IQN/tpgt_1/lun/lun_0" \ > "$FABRIC/$TARGET_IQN/tpgt_1/initiators/$INITIATOR_IQN/lun_0" > > >From there, you don't have to worry about PAGE_SIZE limitiations w/o, I > can simply use use: > > cat $FABRIC/iqn*/tpgt*/initiators/*/session > > to see which acl'ed iSCSI Initiators are logged in on all iSCSI Target > Ports. > > Also I should add that I am currently using /proc/scsi_target/mib > and /proc/iscsi_target_mib for READ-ONLY data with target_core_mod.ko > and iscsi_target_mod.ko respectively. For the other "Demo Mode" case > mentioned above, I am currently using /proc/iscsi_target/mib/sess_attr > to see the active sessions for LIO-Target. > > I will be implementing this model over the next days.. I will post the > commit once its up and you can have a look.. > Ok, here is the commit diff for adding Initiator ACLS to iscsi/$IQN/$TPGT/ under the acls/ subdirectory (instead of "initiators" in the example above). http://git.kernel.org/?p=linux/kernel/git/nab/lio-core-2.6.git;a=commitdiff;h=0a451affbe236b5538e5de06242372715e3ac52c;hp=374e8ace84ca58490be22d881f017d48c6742b50 Other than the name change, everything is functioning in the commit as described in the example above. I am able to successfully mkdir(2) and rmdir(2) iscsi/$IQN/$TPGT/acls/$INITIATOR_IQN, as well as create the SymLinks from iscsi/$IQN/$TPGT/lun/lun_* to iscsi/$IQN/$TPGT/acls/$INITIATOR_IQN/lun_* to create the Initiator TPGT LUN Mappings. There are a couple of remaining items that I am still working on WRT the Initiator ACL code. One is that the CmdSN Queue Depth for the Initiator is hardcoded. This needs to be a configfs attribute under iscsi/$IQN/$TPGT/acls/$INITIATOR_NAME/, and then enabled with a attribute under the same $INITIATOR_NAME directory. Another is assigning READ-ONLY (its hardcoded to R/W for now) access to one of the initiator's TPG LUN mappings. I was thinking name in the TPG LUN Symlink destination name, we could include "lun_0:RO" in order to make this Initiator's LUN be READ-ONLY. Anyways, this are pretty minor and I should be commiting the remaining pieces over the weekend. --nab -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/