Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755543AbYJFVTX (ORCPT ); Mon, 6 Oct 2008 17:19:23 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752737AbYJFVTP (ORCPT ); Mon, 6 Oct 2008 17:19:15 -0400 Received: from mail.ku-gbr.de ([81.3.11.18]:47089 "EHLO ku-gbr.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752453AbYJFVTN (ORCPT ); Mon, 6 Oct 2008 17:19:13 -0400 Date: Mon, 6 Oct 2008 23:19:06 +0200 From: Konstantin Kletschke To: linux-kernel@vger.kernel.org Subject: Re: SATA Cold Boot problems on >2.6.25 with NV Message-ID: <20081006211906.GA31148@anita.doom> Mail-Followup-To: linux-kernel@vger.kernel.org References: <48B80D33.5050806@gmail.com> <20080829212146.GA4321@anita> <48B90F7F.8040308@kernel.org> <48D89C85.2080104@panasas.com> <20080924084846.GA2094@anita> <48DA0A2C.8010008@kernel.org> <48E890B9.6050307@gmail.com> <48E8947A.5020608@kernel.org> <48E89839.5030307@panasas.com> <48E899F9.9040206@kernel.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <48E899F9.9040206@kernel.org> User-Agent: Mutt/1.5.18 (2008-05-17) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 19914 Lines: 436 Am 2008-10-05 19:42 +0900 schrieb Tejun Heo: > Right, the commit fixes generic and CK804 while break nf2/3. Can you > also try the following patch? > > http://article.gmane.org/gmane.linux.ide/34942/raw Hm, sadly doesn't look so well: Linux version 2.6.27-rc8 (root@zappa) (gcc version 4.3.1 (Gentoo 4.3.1-r1 p 2 CEST 2008 Command line: auto BOOT_IMAGE=linux ro root=801 netconsole=6665@10.10.0.1/e 5:68:2c:eb loglevel=8 debug KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) last_pfn = 0x3ffb0 max_arch_pfn = 0x3ffffffff init_memory_mapping 0000000000 - 003fe00000 page 2M 003fe00000 - 003ffb0000 page 4k kernel direct mapping tables up to 3ffb0000 @ 8000-b000 last_map_addr: 3ffb0000 end: 3ffb0000 DMI 2.3 present. ACPI: RSDP 000F8710, 0014 (r0 ACPIAM) ACPI: RSDT 3FFB0000, 0030 (r1 A M I OEMRSDT 8000607 MSFT 97) ACPI: FACP 3FFB0200, 0084 (r2 A M I OEMFACP 8000607 MSFT 97) ACPI: DSDT 3FFB03F0, 3F26 (r1 K8UNF K8UNF201 201 INTL 2002026) ACPI: FACS 3FFC0000, 0040 ACPI: APIC 3FFB0390, 005C (r1 A M I OEMAPIC 8000607 MSFT 97) ACPI: OEMB 3FFC0040, 0056 (r1 A M I AMI_OEM 8000607 MSFT 97) (4 early reservations) ==> bootmem [0000000000 - 003ffb0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 000000100 #1 [0000200000 - 000058a730] TEXT DATA BSS ==> [0000200000 - 000058a73 #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 000010000 #3 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 000000900 [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001fff Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003ffb0 On node 0 totalpages: 261967 DMA zone: 2939 pages, LIFO batch:0 DMA32 zone: 254441 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bf7c0000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257380 Kernel command line: auto BOOT_IMAGE=linux ro root=801 netconsole=6665@10.1 00:22:15:68:2c:eb loglevel=8 debug Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 1607.798 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... AGP bridge at 00:00:00 Aperture from AGP @ f8000000 old size 32 MB Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB Aperture from AGP @ f8000000 size 32 MB (APSIZE 0) Node 0: aperture @ 94f8000000 size 64 MB Aperture beyond 4GB. Ignoring. Memory: 1027656k/1048256k available (2338k kernel code, 19716k reserved, 81 CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay loop (skipped), value calculated using timer frequency.. 92) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) tseg: 0000000000 CPU: AMD Sempron(tm) Processor 2800+ stepping 02 ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 Using local APIC timer interrupts. APIC timer calibration result 12560917 Detected 12.560 MHz APIC timer. net_namespace: 1136 bytes NET: Registered protocol family 16 No dock devices found. node 0 link 0: io port [1000, ffffff] TOM: 0000000040000000 aka 1024M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [40000000, fe0bffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [40000000, fcffffffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:00.0 reg 10 32bit mmio: [f8000000, fbffffff] PCI: 0000:00:01.1 reg 10 io port: [5080, 509f] PCI: 0000:00:01.1 reg 20 io port: [5000, 503f] PCI: 0000:00:01.1 reg 24 io port: [5040, 507f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled PCI: 0000:00:02.0 reg 10 32bit mmio: [febff000, febfffff] pci 0000:00:02.0: supports D1 pci 0000:00:02.0: supports D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled PCI: 0000:00:02.1 reg 10 32bit mmio: [febfe000, febfefff] pci 0000:00:02.1: supports D1 pci 0000:00:02.1: supports D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled PCI: 0000:00:02.2 reg 10 32bit mmio: [febfdc00, febfdcff] pci 0000:00:02.2: supports D1 pci 0000:00:02.2: supports D2 pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.2: PME# disabled PCI: 0000:00:05.0 reg 10 32bit mmio: [febfc000, febfcfff] PCI: 0000:00:05.0 reg 14 io port: [ec00, ec07] pci 0000:00:05.0: supports D1 pci 0000:00:05.0: supports D2 pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:05.0: PME# disabled PCI: 0000:00:06.0 reg 10 io port: [e800, e8ff] PCI: 0000:00:06.0 reg 14 io port: [e480, e4ff] PCI: 0000:00:06.0 reg 18 32bit mmio: [febfb000, febfbfff] pci 0000:00:06.0: supports D1 pci 0000:00:06.0: supports D2 PCI: 0000:00:08.0 reg 20 io port: [ffa0, ffaf] PCI: 0000:00:0a.0 reg 10 io port: [f80, f87] PCI: 0000:00:0a.0 reg 14 io port: [f00, f03] PCI: 0000:00:0a.0 reg 18 io port: [e80, e87] PCI: 0000:00:0a.0 reg 1c io port: [e00, e03] PCI: 0000:00:0a.0 reg 20 io port: [d800, d80f] PCI: 0000:00:0a.0 reg 24 io port: [d400, d47f] PCI: 0000:01:00.0 reg 10 32bit mmio: [fd000000, fdffffff] PCI: 0000:01:00.0 reg 14 32bit mmio: [e8000000, efffffff] PCI: 0000:01:00.0 reg 30 32bit mmio: [fe9e0000, fe9fffff] PCI: bridge 0000:00:0b.0 32bit mmio: [fc900000, fe9fffff] PCI: bridge 0000:00:0b.0 32bit mmio pref: [e4800000, f47fffff] PCI: 0000:02:06.0 reg 10 io port: [c800, c8ff] PCI: 0000:02:06.0 reg 14 32bit mmio: [feaffc00, feaffcff] PCI: 0000:02:06.0 reg 30 32bit mmio: [fffe0000, ffffffff] pci 0000:02:06.0: supports D1 pci 0000:02:06.0: supports D2 pci 0000:02:06.0: PME# supported from D1 D2 D3hot pci 0000:02:06.0: PME# disabled PCI: bridge 0000:00:0e.0 io port: [c000, cfff] PCI: bridge 0000:00:0e.0 32bit mmio: [fea00000, feafffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *9 ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9 ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9 ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *9 ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *9 ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *9 ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *10 ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 22) *14 ACPI: Power Resource [ISAV] (on) ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - E0, shoul Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xf8000000 ACPI: RTC can wake from S4 system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x4000-0x407f has been reserved system 00:09: ioport range 0x4080-0x40ff has been reserved system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0a: iomem range 0xfee00000-0xfeefffff has been reserved system 00:0a: iomem range 0xff7c0000-0xffffffff could not be reserved system 00:0c: ioport range 0x290-0x29f has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0x3fffffff could not be reserved pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01 pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: 0xfc900000-0xfe9fffff pci 0000:00:0b.0: PREFETCH window: 0x000000e4800000-0x000000f47fffff pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0e.0: IO window: 0xc000-0xcfff pci 0000:00:0e.0: MEM window: 0xfea00000-0xfeafffff pci 0000:00:0e.0: PREFETCH window: 0x00000050000000-0x000000500fffff pci 0000:00:0e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 mmio: [0, 0] bus: 01 index 1 mmio: [fc900000, fe9fffff] bus: 01 index 2 mmio: [e4800000, f47fffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [c000, cfff] bus: 02 index 1 mmio: [fea00000, feafffff] bus: 02 index 2 mmio: [50000000, 500fffff] bus: 02 index 3 mmio: [0, 0] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 SGI XFS with ACLs, security attributes, realtime, large block/inode numbers SGI XFS Quota Management subsystem msgmni has been set to 2008 io scheduler noop registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device Linux agpgart interface v0.103 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22 forcedeth 0000:00:05.0: PCI INT A -> Link[LKLN] -> GSI 22 (level, low) -> I forcedeth 0000:00:05.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr Switched to high resolution mode on CPU 0 forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:13:8f:fd:f9 forcedeth 0000:00:05.0: csum timirq lnktim desc-v2 netconsole: local port 6665 netconsole: local IP 10.10.0.1 netconsole: interface eth0 netconsole: remote port 6666 netconsole: remote IP 10.10.0.18 netconsole: remote ethernet address 00:22:15:68:2c:eb netconsole: device eth0 not up yet, forcing it eth0: no link during initialization. eth0: link up. console [netcon0] enabled netconsole: network logging started Driver 'sd' needs updating - please use bus_type methods sata_nv 0000:00:0a.0: version 3.5 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21 sata_nv 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 21 (level, low) -> IRQ sata_nv 0000:00:0a.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xd800 irq 21 ata2: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xd808 irq 21 ata1: link is slow to respond, please be patient (ready=0) ata1: SRST failed (errno=-16) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: link online but device misclassified, retrying ata1: link is slow to respond, please be patient (ready=0) ata1: SRST failed (errno=-16) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: link online but device misclassified, retrying ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: SAMSUNG HD753LJ, 1AA01106, max UDMA7 ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't suppor sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't suppor sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: [sda] Attached SCSI disk PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 TCP cubic registered NET: Registered protocol family 17 XFS mounting filesystem sda1 Starting XFS recovery on filesystem: sda1 (logdev: internal) Ending XFS recovery on filesystem: sda1 (logdev: internal) VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 220k freed input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] processor ACPI0007:00: registered as cooling_device0 input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input ACPI: Power Button (CM) [PWRB] parport_pc 00:06: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EP parport0: Printer, Kyocera Mita FS-1000+ usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IR ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 20, io mem 0xfebff000 sd 0:0:0:0: Attached scsi generic sg0 type 0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 22 ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 22 (level, low) -> IR ohci_hcd 0000:00:02.1: setting latency timer to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.1: irq 22, io mem 0xfebfe000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21 ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 21 (level, low) -> IR ehci_hcd 0000:00:02.2: setting latency timer to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:02.2: debug port 0 ehci_hcd 0000:00:02.2: cache line size of 64 is not supported ehci_hcd 0000:00:02.2: irq 21, io mem 0xfebfdc00 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 8 ports detected pata_amd 0000:00:08.0: version 0.3.10 pata_amd 0000:00:08.0: power state changed by ACPI to D0 pata_amd 0000:00:08.0: setting latency timer to 64 scsi2 : pata_amd scsi3 : pata_amd ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata4.00: ATAPI: HL-DT-ST CD-ROM GCR-8520B, 1.00, max MWDMA2 ata4: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0x0) ACPI=0x39f (120:60 ata4.00: configured for MWDMA2 scsi 3:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8520B 1.00 PQ: 0 ANSI: scsi 3:0:0:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19 8139too 0000:02:06.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ eth1: RealTek RTL8139 at 0xffffc20000066c00, 00:a1:b0:f0:2b:d1, IRQ 19 eth1: Identified 8139 chip type 'RTL-8100B/8139D' Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 usb 2-2: new full speed USB device using ohci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0 usbcore: registered new interface driver usblp rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k lp0: using parport0 (interrupt-driven). XFS mounting filesystem sda3 Ending clean XFS mount for filesystem: sda3 XFS mounting filesystem sda5 Ending clean XFS mount for filesystem: sda5 XFS mounting filesystem sda9 Ending clean XFS mount for filesystem: sda9 XFS mounting filesystem sda7 Starting XFS recovery on filesystem: sda7 (logdev: internal) Ending XFS recovery on filesystem: sda7 (logdev: internal) kjournald2 starting. Commit interval 5 seconds EXT4 FS on sda6, internal journal EXT4-fs: mounted filesystem with journal data mode. EXT4-fs: Ignoring delalloc option - requested data journaling mode EXT4-fs: file extents enabled EXT4-fs: mballoc enabled XFS mounting filesystem sda8 Ending clean XFS mount for filesystem: sda8 Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k PPP generic driver version 2.4.2 NET: Registered protocol family 24 eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (8192 buckets, 32768 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. RPC: Registered udp transport module. RPC: Registered tcp transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period May be my engine has a problem with the disk itself additionaly? ata1: link online but device misclassified, retrying Regards, Konsti -- GPG KeyID EF62FCEF Fingerprint: 13C9 B16B 9844 EC15 CC2E A080 1E69 3FDA EF62 FCEF -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/