Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756366AbYJHWSu (ORCPT ); Wed, 8 Oct 2008 18:18:50 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754915AbYJHWSm (ORCPT ); Wed, 8 Oct 2008 18:18:42 -0400 Received: from smtprelay10.ispgateway.de ([80.67.29.24]:44794 "EHLO smtprelay10.ispgateway.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754888AbYJHWSi (ORCPT ); Wed, 8 Oct 2008 18:18:38 -0400 From: Ingo Oeser To: Greg KH Subject: Re: [RFC patch 0/5] genirq: add infrastructure for threaded interrupt handlers Date: Thu, 9 Oct 2008 00:18:33 +0200 User-Agent: KMail/1.9.10 References: <20081001223213.078984344@linutronix.de> <1222908014.31183.67.camel@perihelion.int.jonmasters.org> <20081002220742.GC9201@kroah.com> In-Reply-To: <20081002220742.GC9201@kroah.com> Cc: Thomas Gleixner , Jon Masters , linux-kernel@vger.kernel.org, Ben Collins , Tim Gardner MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200810090018.35460.ioe-lkml@rameria.de> X-Df-Sender: 849595 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 64439 Lines: 1215 Hi there, [CC'ed some distribution specific experts] On Friday 03 October 2008, you wrote: > On Wed, Oct 01, 2008 at 08:40:14PM -0400, Jon Masters wrote: > > On Wed, 2008-10-01 at 23:02 +0000, Thomas Gleixner wrote: > > > > > I hope to have a real converted driver (aside of the dummy module used > > > for testing) ready real soon - as far as bugs/regressions stay out of > > > my way for a while. :) > > > > Sven and I started poking at the various USB host drivers on the flight > > back from Plumbers. I'll see if I can convert over a few here on the > > systems that I have and send over some patches. > > There's only 3, how hard could it be? :) Heh! That feature is the only thing, that keeps my crappy combination of hardware and Ubuntu Hardy together :-) With the non-RT Ubuntu kernel flavors, it just hangs in that situation. It looks like this at the moment with a Ubuntu RT-Kernel, in case someone likes to debug that: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.24-21-rt (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP PREEMPT RT Mon Aug 25 19:24:40 UTC 2008 (Ubuntu 2.6.24-4.6-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfff0000 (usable) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000cfff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfff3000 - 00000000d0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e8000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Warning only 4GB will be used. [ 0.000000] Use a HIGHMEM64G enabled kernel. [ 0.000000] 3200MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f4b40 [ 0.000000] Entering add_active_range(0, 0, 1048576) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 1048576 [ 0.000000] On node 0 totalpages: 1048576 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4040 pages, LIFO batch:0 [ 0.000000] Normal zone: 3080 pages used for memmap [ 0.000000] Normal zone: 222200 pages, LIFO batch:31 [ 0.000000] HighMem zone: 11200 pages used for memmap [ 0.000000] HighMem zone: 808000 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6490 checksum 0 [ 0.000000] ACPI: RSDP 000F6490, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT CFFF3000, 0030 (r1 GBT NVDAACPI 42302E31 NVDA 1010101) [ 0.000000] ACPI: FACP CFFF3040, 0074 (r1 GBT NVDAACPI 42302E31 NVDA 1010101) [ 0.000000] ACPI: DSDT CFFF30C0, 4B34 (r1 GBT NVDAACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS CFFF0000, 0040 [ 0.000000] ACPI: MCFG CFFF7C80, 003C (r1 GBT NVDAACPI 42302E31 NVDA 1010101) [ 0.000000] ACPI: APIC CFFF7C00, 007C (r1 GBT NVDAACPI 42302E31 NVDA 1010101) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option. [ 0.000000] Using ACPI for processor (LAPIC) configuration information [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 2 [ 0.000000] Allocating PCI resources starting at f1000000 (gap: f0000000:0ec00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1034240 [ 0.000000] Kernel command line: root=/dev/mapper/Ubuntu-root ro noapic quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2211.442 MHz processor. [ 18.517765] spurious 8259A interrupt: IRQ7. [ 18.519999] Console: colour VGA+ 80x25 [ 18.520001] console [tty0] enabled [ 18.520235] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 18.520537] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 18.688113] Memory: 3335620k/4194304k available (2225k kernel code, 71024k reserved, 1059k data, 368k init, 2490304k highmem) [ 18.688120] virtual kernel memory layout: [ 18.688121] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 18.688122] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 18.688123] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 18.688124] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 18.688125] .init : 0xc043b000 - 0xc0497000 ( 368 kB) [ 18.688126] .data : 0xc032c6d0 - 0xc0435324 (1059 kB) [ 18.688127] .text : 0xc0100000 - 0xc032c6d0 (2225 kB) [ 18.688130] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 18.748223] Calibrating delay using timer specific routine.. 4424.69 BogoMIPS (lpj=2212348) [ 18.748260] Security Framework initialized [ 18.748264] SELinux: Disabled at boot. [ 18.748270] AppArmor: AppArmor initialized [ 18.748273] Failure registering capabilities with primary security module. [ 18.748287] Mount-cache hash table entries: 512 [ 18.748396] Initializing cgroup subsys ns [ 18.748399] Initializing cgroup subsys cpuacct [ 18.748408] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 [ 18.748416] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 18.748418] CPU: L2 Cache: 512K (64 bytes/line) [ 18.748420] CPU 0(2) -> Core 0 [ 18.748422] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00020410 00002001 00000000 0000001f 00000000 [ 18.748431] Compat vDSO mapped to ffffe000. [ 18.748439] Checking 'hlt' instruction... OK. [ 18.752453] SMP alternatives: switching to UP code [ 18.753321] Early unpacking initramfs... done [ 19.066316] ACPI: Core revision 20070126 [ 19.066372] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 19.068299] ACPI: setting ELCR to 0200 (from 8ca0) [ 19.069950] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 [ 19.069966] SMP alternatives: switching to SMP code [ 19.070290] Booting processor 1/1 eip 3000 [ 19.080875] Initializing CPU#1 [ 19.141627] Calibrating delay using timer specific routine.. 4422.03 BogoMIPS (lpj=2211015) [ 19.141633] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 [ 19.141639] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 19.141641] CPU: L2 Cache: 512K (64 bytes/line) [ 19.141642] CPU 1(2) -> Core 1 [ 19.141644] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00020410 00002001 00000000 0000001f 00000000 [ 19.141254] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 [ 19.141268] Total of 2 processors activated (8846.72 BogoMIPS). [ 19.243554] Brought up 2 CPUs [ 19.243573] CPU0 attaching sched-domain: [ 19.243576] domain 0: span 03 [ 19.243578] groups: 01 02 [ 19.243581] CPU1 attaching sched-domain: [ 19.243583] domain 0: span 03 [ 19.243585] groups: 02 01 [ 19.243785] net_namespace: 76 bytes [ 19.243790] Booting paravirtualized kernel on bare hardware [ 19.244211] Time: 5:45:17 Date: 10/08/08 [ 19.244244] NET: Registered protocol family 16 [ 19.244421] EISA bus registered [ 19.244425] ACPI: bus type pci registered [ 19.248898] PCI: PCI BIOS revision 3.00 entry at 0xfb2a0, last bus=3 [ 19.248900] PCI: Using configuration type 1 [ 19.248903] Setting up standard PCI resources [ 19.251879] ACPI: EC: Look up EC in DSDT [ 19.258260] ACPI: Interpreter enabled [ 19.258265] ACPI: (supports S0 S1 S4 S5) [ 19.258279] ACPI: Using PIC for interrupt routing [ 19.265816] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 19.266397] PCI: Transparent bridge - 0000:00:06.0 [ 19.266644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 19.266953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 19.314347] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15) [ 19.314491] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.314634] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.314778] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 *15) [ 19.314919] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.315068] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.315216] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15) [ 19.315361] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.315506] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.315653] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15) [ 19.315799] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 *7 9 10 11 14 15) [ 19.315944] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) [ 19.316096] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.316243] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 *15) [ 19.316389] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 19.316535] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.316681] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 19.316827] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 *15) [ 19.316973] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15) [ 19.317161] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 19.317331] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 19.317501] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 19.317669] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 19.317837] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 19.318005] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 19.318183] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 19.318355] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 19.318526] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 19.318698] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 19.318869] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 19.319041] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. [ 19.319220] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 19.319392] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 19.319564] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 19.319739] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 19.319911] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. [ 19.320089] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 19.320263] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled. [ 19.320395] Linux Plug and Play Support v0.97 (c) Adam Belay [ 19.320422] pnp: PnP ACPI init [ 19.320429] ACPI: bus type pnp registered [ 19.323619] pnp: PnP ACPI: found 10 devices [ 19.323621] ACPI: ACPI bus type pnp unregistered [ 19.323624] PnPBIOS: Disabled by ACPI PNP [ 19.323826] PCI: Using ACPI for IRQ routing [ 19.323830] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 19.377034] NET: Registered protocol family 8 [ 19.377036] NET: Registered protocol family 20 [ 19.377111] AppArmor: AppArmor Filesystem Enabled [ 19.389057] system 00:01: ioport range 0x1000-0x107f has been reserved [ 19.389060] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 19.389063] system 00:01: ioport range 0x1400-0x147f has been reserved [ 19.389065] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 19.389067] system 00:01: ioport range 0x1800-0x187f has been reserved [ 19.389070] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 19.389073] system 00:01: iomem range 0xd0000000-0xdfffffff could not be reserved [ 19.389079] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 19.389081] system 00:02: ioport range 0x800-0x87f has been reserved [ 19.389084] system 00:02: ioport range 0x295-0x314 has been reserved [ 19.389086] system 00:02: ioport range 0x290-0x294 has been reserved [ 19.389094] system 00:08: iomem range 0xe8000000-0xefffffff could not be reserved [ 19.389100] system 00:09: iomem range 0xcc000-0xcffff has been reserved [ 19.389102] system 00:09: iomem range 0xf0000-0xf7fff could not be reserved [ 19.389105] system 00:09: iomem range 0xf8000-0xfbfff could not be reserved [ 19.389107] system 00:09: iomem range 0xfc000-0xfffff could not be reserved [ 19.389110] system 00:09: iomem range 0xcfff0000-0xcfffffff could not be reserved [ 19.389113] system 00:09: iomem range 0xffff0000-0xffffffff could not be reserved [ 19.389116] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 19.389118] system 00:09: iomem range 0x100000-0xcffeffff could not be reserved [ 19.389121] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 19.389124] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved [ 19.419494] PCI: Bridge: 0000:00:06.0 [ 19.419496] IO window: 9000-9fff [ 19.419499] MEM window: f5000000-f6ffffff [ 19.419501] PREFETCH window: disabled. [ 19.419504] PCI: Bridge: 0000:02:00.0 [ 19.419505] IO window: disabled. [ 19.419510] MEM window: f2000000-f4ffffff [ 19.419513] PREFETCH window: f0000000-f1ffffff [ 19.419518] PCI: Bridge: 0000:00:0e.0 [ 19.419519] IO window: disabled. [ 19.419521] MEM window: f2000000-f4ffffff [ 19.419523] PREFETCH window: f0000000-f1ffffff [ 19.419531] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 19.419539] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 19.419551] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 19.419577] NET: Registered protocol family 2 [ 19.454990] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 19.455239] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 19.455855] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) [ 19.456869] TCP: Hash tables configured (established 131072 bind 65536) [ 19.456874] TCP reno registered [ 19.468060] checking if image is initramfs... it is [ 20.080746] Freeing initrd memory: 8382k freed [ 20.081459] audit: initializing netlink socket (disabled) [ 20.081471] audit(1223444718.291:1): initialized [ 20.081613] krcupreemptd setsched 0 [ 20.081614] prio = 98 [ 20.081671] highmem bounce pool size: 64 pages [ 20.081742] VFS: Disk quotas dquot_6.5.1 [ 20.081763] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 20.081837] io scheduler noop registered [ 20.081838] io scheduler anticipatory registered [ 20.081840] io scheduler deadline registered [ 20.081849] io scheduler cfq registered (default) [ 20.106797] pci 0000:00:05.0: Enabling HT MSI Mapping [ 20.106811] pci 0000:00:05.1: Enabling HT MSI Mapping [ 20.106824] pci 0000:00:05.2: Enabling HT MSI Mapping [ 20.106836] pci 0000:00:06.0: Enabling HT MSI Mapping [ 20.106851] pci 0000:00:06.1: Enabling HT MSI Mapping [ 20.106866] pci 0000:00:08.0: Enabling HT MSI Mapping [ 20.106879] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 20.106890] Boot video device is 0000:03:00.0 [ 20.106992] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 20.107027] assign_interrupt_mode Found MSI capability [ 20.107044] Allocate Port Service[0000:00:0e.0:pcie00] [ 20.107265] isapnp: Scanning for PnP cards... [ 20.463165] isapnp: No Plug & Play device found [ 20.490553] Real Time Clock Driver v1.12ac [ 20.490664] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 20.491845] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 20.491906] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 20.491985] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 20.491988] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 20.492106] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 20.503193] mice: PS/2 mouse device common for all mice [ 20.503308] EISA: Probing bus 0 at eisa.0 [ 20.503314] Cannot allocate resource for EISA slot 1 [ 20.503330] EISA: Detected 0 cards. [ 20.503332] cpuidle: using governor ladder [ 20.503404] NET: Registered protocol family 1 [ 20.503427] Using IPI No-Shortcut mode [ 20.503456] registered taskstats version 1 [ 20.503560] Magic number: 12:388:769 [ 20.503646] hash matches device ptyp5 [ 20.503660] hash matches device kmsg [ 20.503666] hash matches device 0000:00:05.0 [ 20.503684] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 20.503686] EDD information not available. [ 20.503872] Freeing unused kernel memory: 368k freed [ 20.525317] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 21.742212] fuse init (API version 7.9) [ 21.768889] device-mapper: uevent: version 1.0.3 [ 21.768936] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 21.783453] md: linear personality registered for level -1 [ 21.787115] md: multipath personality registered for level -4 [ 21.790905] md: raid0 personality registered for level 0 [ 21.795291] md: raid1 personality registered for level 1 [ 21.799015] xor: measuring software checksum speed [ 21.803477] 8regs : 2896.000 MB/sec [ 21.808477] 8regs_prefetch: 2804.000 MB/sec [ 21.813478] 32regs : 2192.000 MB/sec [ 21.818479] 32regs_prefetch: 1796.000 MB/sec [ 21.818481] xor: using function: 8regs (2896.000 MB/sec) [ 21.819566] async_tx: api initialized (async) [ 21.839519] raid6: int32x1 824 MB/s [ 21.856529] raid6: int32x2 871 MB/s [ 21.873550] raid6: int32x4 835 MB/s [ 21.890545] raid6: int32x8 609 MB/s [ 21.907509] raid6: mmxx1 1753 MB/s [ 21.924501] raid6: mmxx2 3230 MB/s [ 21.941508] raid6: sse1x1 1757 MB/s [ 21.958508] raid6: sse1x2 3011 MB/s [ 21.975510] raid6: sse2x1 2968 MB/s [ 21.992511] raid6: sse2x2 4074 MB/s [ 21.992512] raid6: using algorithm sse2x2 (4074 MB/s) [ 21.992515] md: raid6 personality registered for level 6 [ 21.992517] md: raid5 personality registered for level 5 [ 21.992518] md: raid4 personality registered for level 4 [ 22.018354] md: raid10 personality registered for level 10 [ 22.236163] usbcore: registered new interface driver usbfs [ 22.236183] usbcore: registered new interface driver hub [ 22.236259] usbcore: registered new device driver usb [ 22.247614] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 22.247891] ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 7 [ 22.247894] PCI: setting IRQ 7 as level-triggered [ 22.247898] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 7 (level, low) -> IRQ 7 [ 22.247907] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 22.247910] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 22.248138] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 22.248186] ohci_hcd 0000:00:02.0: irq 7, io mem 0xf7005000 [ 22.301202] usb usb1: configuration #1 chosen from 1 choice [ 22.301223] hub 1-0:1.0: USB hub found [ 22.301233] hub 1-0:1.0: 10 ports detected [ 22.662617] usb 1-9: new low speed USB device using ohci_hcd and address 2 [ 22.853579] usb 1-9: configuration #1 chosen from 1 choice [ 22.922573] SCSI subsystem initialized [ 22.980791] libata version 3.00 loaded. [ 22.983376] pata_amd 0000:00:04.0: version 0.3.10 [ 22.983423] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 22.983502] scsi0 : pata_amd [ 22.983546] scsi1 : pata_amd [ 22.984057] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 22.984060] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 23.288979] ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB02, max UDMA/33 [ 23.445904] ata1.00: configured for UDMA/33 [ 23.445937] ata2: port disabled. ignoring. [ 23.446803] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182M SB02 PQ: 0 ANSI: 5 [ 23.740145] ACPI: PCI Interrupt Link [LSID] enabled at IRQ 11 [ 23.740150] PCI: setting IRQ 11 as level-triggered [ 23.740153] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSID] -> GSI 11 (level, low) -> IRQ 11 [ 23.740187] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 23.740196] ACPI: PCI interrupt for device 0000:00:05.0 disabled [ 23.740397] ACPI: PCI Interrupt Link [LFID] enabled at IRQ 15 [ 23.740399] PCI: setting IRQ 15 as level-triggered [ 23.740403] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LFID] -> GSI 15 (level, low) -> IRQ 15 [ 23.740417] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 23.740423] ACPI: PCI interrupt for device 0000:00:05.1 disabled [ 23.740621] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 10 [ 23.740623] PCI: setting IRQ 10 as level-triggered [ 23.740626] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 10 (level, low) -> IRQ 10 [ 23.740641] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 23.740647] ACPI: PCI interrupt for device 0000:00:05.2 disabled [ 24.228852] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 24.229104] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 7 [ 24.229107] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 7 (level, low) -> IRQ 7 [ 24.229112] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 24.742086] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:e6:88:c7:bc [ 24.742091] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 24.741991] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5 [ 24.741996] PCI: setting IRQ 5 as level-triggered [ 24.742000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 5 (level, low) -> IRQ 5 [ 24.742010] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 24.742013] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 24.742044] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 24.742071] ehci_hcd 0000:00:02.1: debug port 1 [ 24.742074] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 24.742487] ehci_hcd 0000:00:02.1: irq 5, io mem 0xf7006000 [ 24.743042] usb 1-9: USB disconnect, address 2 [ 24.747902] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.748097] usb usb2: configuration #1 chosen from 1 choice [ 24.748118] hub 2-0:1.0: USB hub found [ 24.748126] hub 2-0:1.0: 10 ports detected [ 24.849006] sata_nv 0000:00:05.0: version 3.5 [ 24.849018] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSID] -> GSI 11 (level, low) -> IRQ 11 [ 24.849056] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 24.849682] scsi2 : sata_nv [ 24.849783] scsi3 : sata_nv [ 24.849933] ata3: SATA max UDMA/133 cmd 0xa400 ctl 0xa800 bmdma 0xb400 irq 11 [ 24.849936] ata4: SATA max UDMA/133 cmd 0xac00 ctl 0xb000 bmdma 0xb408 irq 11 [ 25.181614] Driver 'sr' needs updating - please use bus_type methods [ 25.189497] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 25.189502] Uniform CD-ROM driver Revision: 3.20 [ 25.189552] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 25.203748] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 25.264959] usb 1-9: new low speed USB device using ohci_hcd and address 3 [ 25.332719] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 25.455207] usb 1-9: configuration #1 chosen from 1 choice [ 25.458200] usbcore: registered new interface driver hiddev [ 25.467322] input: Logitech Trackball as /devices/pci0000:00/0000:00:02.0/usb1/1-9/1-9:1.0/input/input2 [ 25.478011] input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:02.0-9 [ 25.478026] usbcore: registered new interface driver usbhid [ 25.478029] /build/buildd/linux-2.6.24/debian/build/custom-source-rt/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 25.543836] ata3.00: HPA unlocked: 976771055 -> 976773168, native 976773168 [ 25.543843] ata3.00: ATA-7: ST3500630NS, 3.AEG, max UDMA/133 [ 25.543845] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 25.580880] ata3.00: configured for UDMA/133 [ 25.883782] ata4: SATA link down (SStatus 0 SControl 300) [ 25.894907] scsi 2:0:0:0: Direct-Access ATA ST3500630NS 3.AE PQ: 0 ANSI: 5 [ 25.894973] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 25.894521] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LFID] -> GSI 15 (level, low) -> IRQ 15 [ 25.894568] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 25.894608] scsi4 : sata_nv [ 25.894662] scsi5 : sata_nv [ 25.894806] ata5: SATA max UDMA/133 cmd 0xb800 ctl 0xbc00 bmdma 0xc800 irq 15 [ 25.894809] ata6: SATA max UDMA/133 cmd 0xc000 ctl 0xc400 bmdma 0xc808 irq 15 [ 26.197073] ata5: SATA link down (SStatus 0 SControl 300) [ 26.510116] ata6: SATA link down (SStatus 0 SControl 300) [ 26.520469] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 10 (level, low) -> IRQ 10 [ 26.520505] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 26.520560] scsi6 : sata_nv [ 26.520794] scsi7 : sata_nv [ 26.520936] ata7: SATA max UDMA/133 cmd 0xcc00 ctl 0xd000 bmdma 0xdc00 irq 10 [ 26.520939] ata8: SATA max UDMA/133 cmd 0xd400 ctl 0xd800 bmdma 0xdc08 irq 10 [ 26.823157] ata7: SATA link down (SStatus 0 SControl 300) [ 27.136196] ata8: SATA link down (SStatus 0 SControl 300) [ 27.149496] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 15 [ 27.149500] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] -> GSI 15 (level, low) -> IRQ 15 [ 27.149507] 3c59x: Donald Becker and others. [ 27.149511] 0000:01:07.0: 3Com PCI 3c905B Cyclone 100baseTx at f8886000. [ 27.158757] Driver 'sd' needs updating - please use bus_type methods [ 27.158833] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 27.158844] sd 2:0:0:0: [sda] Write Protect is off [ 27.158846] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.158861] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.158901] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 27.158909] sd 2:0:0:0: [sda] Write Protect is off [ 27.158911] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.158925] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.158928] sda:ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 27.172844] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5 [ 27.172855] 0000:01:08.0: 3Com PCI 3c905B Cyclone 100baseTx at f89b6000. [ 27.177621] sda1 sda2 < sda5 > [ 27.185442] sd 2:0:0:0: [sda] Attached SCSI disk [ 27.700325] EXT3-fs: mounted filesystem with ordered data mode. [ 27.700371] kjournald starting. Commit interval 5 seconds [ 34.798310] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 34.909990] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 35.084447] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 35.084466] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80 [ 36.006688] udev: renamed network interface eth0 to lan [ 37.913301] input: Power Button (FF) as /devices/virtual/input/input3 [ 37.930424] ACPI: Power Button (FF) [PWRF] [ 37.930474] input: Power Button (CM) as /devices/virtual/input/input4 [ 37.949445] ACPI: Power Button (CM) [PWRB] [ 38.426176] udev: renamed network interface eth2 to dmz [ 38.435089] udev: renamed network interface eth1 to wan [ 39.990176] lan: no link during initialization. [ 40.072308] dmz: setting half-duplex. [ 40.861083] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10 [ 40.861087] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 10 (level, low) -> IRQ 10 [ 40.861102] PCI: Setting latency timer of device 0000:00:06.1 to 64 [ 41.313471] NET: Registered protocol family 10 [ 41.313839] lo: Disabled Privacy Extensions [ 41.314395] ADDRCONF(NETDEV_UP): lan: link is not ready [ 41.314915] ADDRCONF(NETDEV_UP): dmz: link is not ready [ 41.504445] lp: driver loaded but no devices found [ 41.699128] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11 [ 41.699133] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNK7] -> GSI 11 (level, low) -> IRQ 11 [ 41.699138] matroxfb: Matrox G550 detected [ 41.700140] PInS memtype = 5 [ 41.700355] matroxfb: MTRR's turned on [ 41.700375] matroxfb: 640x480x8bpp (virtual: 640x26214) [ 41.700377] matroxfb: framebuffer at 0xF0000000, mapped to 0xf8c00000, size 33554432 [ 41.700433] fb0: MATROX frame buffer device [ 41.700434] fb0: initializing hardware [ 42.307283] EXT3 FS on dm-0, internal journal [ 43.208393] kjournald starting. Commit interval 5 seconds [ 43.217060] EXT3 FS on sda1, internal journal [ 43.217067] EXT3-fs: mounted filesystem with ordered data mode. [ 43.286046] Adding 10108920k swap on /dev/mapper/Ubuntu-swap_1. Priority:-1 extents:1 across:10108920k [ 43.491686] ip_tables: (C) 2000-2006 Netfilter Core Team [ 43.582127] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 43.643560] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 43.903238] wan: setting half-duplex. [ 43.904752] ADDRCONF(NETDEV_UP): wan: link is not ready [ 44.138697] PPP generic driver version 2.4.2 [ 44.164043] NET: Registered protocol family 17 [ 44.889602] No dock devices found. [ 45.332851] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00) [ 45.332360] powernow-k8: MP systems not supported by PSB BIOS structure [ 45.333080] powernow-k8: MP systems not supported by PSB BIOS structure [ 48.448693] Linux agpgart interface v0.102 [ 48.483364] [drm] Initialized drm 1.1.0 20060810 [ 48.626623] [drm] Initialized mga 3.2.1 20051102 on minor 0 [ 50.264062] ppdev: user-space parallel port driver [ 55.001104] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 55.001111] apm: disabled - APM is not SMP safe. [ 65.381474] Bluetooth: Core ver 2.11 [ 65.381855] NET: Registered protocol family 31 [ 65.381859] Bluetooth: HCI device and connection manager initialized [ 65.381863] Bluetooth: HCI socket layer initialized [ 65.411817] Bluetooth: L2CAP ver 2.9 [ 65.411822] Bluetooth: L2CAP socket layer initialized [ 65.469713] Bluetooth: RFCOMM socket layer initialized [ 65.469726] Bluetooth: RFCOMM TTY layer initialized [ 65.469728] Bluetooth: RFCOMM ver 1.8 [ 940.928916] irq 7: nobody cared (try booting with the "irqpoll" option) [ 940.928922] Pid: 1606, comm: IRQ-7 Not tainted 2.6.24-21-rt #1 [ 940.928943] [] __report_bad_irq+0x24/0x80 [ 940.928956] [] note_interrupt+0x27b/0x2a0 [ 940.928959] [] handle_IRQ_event+0x5c/0x100 [ 940.928974] [] thread_simple_irq+0x6c/0x90 [ 940.928983] [] do_irqd+0x229/0x290 [ 940.928998] [] do_irqd+0x0/0x290 [ 940.929002] [] kthread+0x42/0x70 [ 940.929005] [] kthread+0x0/0x70 [ 940.929011] [] kernel_thread_helper+0x7/0x10 [ 940.929022] ======================= [ 940.929023] handlers: [ 940.929024] [] (usb_hcd_irq+0x0/0x60 [usbcore]) [ 940.929043] turning off IO-APIC fast mode. [ 1007.970826] irq 7: nobody cared (try booting with the "irqpoll" option) [ 1007.970832] Pid: 1606, comm: IRQ-7 Not tainted 2.6.24-21-rt #1 [ 1007.970852] [] __report_bad_irq+0x24/0x80 [ 1007.970864] [] note_interrupt+0x27b/0x2a0 [ 1007.970868] [] handle_IRQ_event+0x5c/0x100 [ 1007.970883] [] thread_simple_irq+0x6c/0x90 [ 1007.970892] [] do_irqd+0x229/0x290 [ 1007.970907] [] do_irqd+0x0/0x290 [ 1007.970911] [] kthread+0x42/0x70 [ 1007.970914] [] kthread+0x0/0x70 [ 1007.970920] [] kernel_thread_helper+0x7/0x10 [ 1007.970931] ======================= [ 1007.970932] handlers: [ 1007.970933] [] (usb_hcd_irq+0x0/0x60 [usbcore]) [ 5970.101996] irq 7: nobody cared (try booting with the "irqpoll" option) [ 5970.102003] Pid: 1606, comm: IRQ-7 Not tainted 2.6.24-21-rt #1 [ 5970.102022] [] __report_bad_irq+0x24/0x80 [ 5970.102034] [] note_interrupt+0x27b/0x2a0 [ 5970.102038] [] handle_IRQ_event+0x5c/0x100 [ 5970.102053] [] thread_simple_irq+0x6c/0x90 [ 5970.102063] [] do_irqd+0x229/0x290 [ 5970.102078] [] do_irqd+0x0/0x290 [ 5970.102082] [] kthread+0x42/0x70 [ 5970.102085] [] kthread+0x0/0x70 [ 5970.102091] [] kernel_thread_helper+0x7/0x10 [ 5970.102102] ======================= [ 5970.102103] handlers: [ 5970.102105] [] (usb_hcd_irq+0x0/0x60 [usbcore]) [ 7633.252211] irq 7: nobody cared (try booting with the "irqpoll" option) [ 7633.252218] Pid: 1606, comm: IRQ-7 Not tainted 2.6.24-21-rt #1 [ 7633.252237] [] __report_bad_irq+0x24/0x80 [ 7633.252249] [] note_interrupt+0x27b/0x2a0 [ 7633.252253] [] handle_IRQ_event+0x5c/0x100 [ 7633.252268] [] thread_simple_irq+0x6c/0x90 [ 7633.252278] [] do_irqd+0x229/0x290 [ 7633.252292] [] do_irqd+0x0/0x290 [ 7633.252297] [] kthread+0x42/0x70 [ 7633.252300] [] kthread+0x0/0x70 [ 7633.252306] [] kernel_thread_helper+0x7/0x10 [ 7633.252317] ======================= [ 7633.252318] handlers: [ 7633.252319] [] (usb_hcd_irq+0x0/0x60 [usbcore]) [56238.249373] wan: setting full-duplex. [56238.250332] ADDRCONF(NETDEV_CHANGE): wan: link becomes ready [56249.237072] wan: no IPv6 routers present [56352.342443] NET: Registered protocol family 24 [58562.155510] irq 7: nobody cared (try booting with the "irqpoll" option) [58562.155516] Pid: 1606, comm: IRQ-7 Not tainted 2.6.24-21-rt #1 [58562.155537] [] __report_bad_irq+0x24/0x80 [58562.155550] [] note_interrupt+0x27b/0x2a0 [58562.155554] [] handle_IRQ_event+0x5c/0x100 [58562.155569] [] thread_simple_irq+0x6c/0x90 [58562.155579] [] do_irqd+0x229/0x290 [58562.155594] [] do_irqd+0x0/0x290 [58562.155599] [] kthread+0x42/0x70 [58562.155602] [] kthread+0x0/0x70 [58562.155608] [] kernel_thread_helper+0x7/0x10 [58562.155620] ======================= [58562.155622] handlers: [58562.155623] [] (usb_hcd_irq+0x0/0x60 [usbcore]) CPU0 CPU1 0: 556 1 XT-PIC-XT timer 1: 5841 888 XT-PIC-XT i8042 2: 0 0 XT-PIC-XT cascade 5: 1 1 XT-PIC-XT ehci_hcd:usb2, dmz 7: 160816 1687071 XT-PIC-XT ohci_hcd:usb1 8: 2 1 XT-PIC-XT rtc 9: 0 0 XT-PIC-XT acpi 10: 383980 11338 XT-PIC-XT sata_nv, HDA Intel 11: 669673 57055 XT-PIC-XT sata_nv 14: 584674 64101 XT-PIC-XT libata 15: 42236 15407 XT-PIC-XT libata, sata_nv, wan 222: 5929886 3346 PCI-MSI-edge lan NMI: 0 0 Non-maskable interrupts LOC: 59209279 59195939 Local timer interrupts RES: 4365453 8967863 Rescheduling interrupts CAL: 70549 64347 function call interrupts TLB: 12860 12054 TLB shootdowns TRM: 0 0 Thermal event interrupts SPU: 0 0 Spurious interrupts ERR: 14677 MIS: 0 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1) Subsystem: Giga-byte Technology Unknown device 5001 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [b8] Subsystem: Gammagraphx, Inc. Unknown device 0000 Capabilities: [8c] HyperTransport: MSI Mapping 00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2) Subsystem: Giga-byte Technology Unknown device a002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0300c Data: 4139 Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 Link: Latency L0s <512ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [80] Subsystem: Matrox Graphics, Inc. Unknown device 6666 Capabilities: [90] Express PCI/PCI-X Bridge IRQ 0 Device: Supported: MaxPayload 512 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <4us, L1 <64us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0 Link: Latency L0s <512ns, L1 <16us Link: ASPM Disabled CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01) (prog-if 00 [VGA controller]) Subsystem: Matrox Graphics, Inc. Unknown device 22c0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1 Bus 002 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.24-21-rt ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:02.1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Port 6: 0000.0100 power Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 001 Device 003: ID 046d:c404 Logitech, Inc. TrackMan Wheel Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x046d Logitech, Inc. idProduct 0xc404 TrackMan Wheel bcdDevice 2.20 iManufacturer 1 Logitech iProduct 2 Trackball iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 103 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) Bus 001 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.24-21-rt ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Port 6: 0000.0100 power Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0303 lowspeed power enable connect Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 75 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping : 2 cpu MHz : 2211.442 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy ts fid vid ttp tm stc bogomips : 4424.69 clflush size : 64 processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 75 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping : 2 cpu MHz : 2211.442 cache size : 512 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy ts fid vid ttp tm stc bogomips : 4422.03 clflush size : 64 Booting without "noapic" panics while booting. I wish I could debug that further and keep initrd stuff working at the same time... Best Regards Ingo Oeser -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/