Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755403AbYJPQCn (ORCPT ); Thu, 16 Oct 2008 12:02:43 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751507AbYJPQCc (ORCPT ); Thu, 16 Oct 2008 12:02:32 -0400 Received: from david.siemens.de ([192.35.17.14]:23230 "EHLO david.siemens.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751226AbYJPQCc (ORCPT ); Thu, 16 Oct 2008 12:02:32 -0400 Message-ID: <48F766CB.3030603@siemens.com> Date: Thu, 16 Oct 2008 18:07:39 +0200 From: "Hillier, Gernot" Organization: Siemens AG, CT SE 2 User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.8.1.9) Gecko/20070801 SUSE/2.0.0.9-0.1 Thunderbird/2.0.0.9 Mnenhy/0.7.5.666 MIME-Version: 1.0 To: "Graham, David" , "Fodor, Zoltan" CC: linux-kernel@vger.kernel.org, netdev@vger.kernel.org, "Allan, Bruce W" , "Hockert, Jeff W" Subject: Re: e1000e: sporadic "hardware error"s with Intel 82563EB on Supermicro X7DB3 References: <48EE04C0.6070504@siemens.com> <48F463D1.70605@siemens.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1526 Lines: 48 Hi there! Graham, David wrote: > It would help if you could provide a little more information. Could you > provide (for one of each of the two configurations that you have - one > with the IPMI card, one without): > > lspci -t > lspci -vvv -xxxx > ethtool -e eth0 Ok, it turned out that we still can reproduce the problem - even after the firmware upgrade. So I collected the information you requested from two machines: - BVSIM3 is the one with the IPMI card. - BVSIM5 the one without the IPMI card. As the output from the commands you requested is rather large, I uploaded it to the following URLs instead posting it to the list, hope that's ok: http://www.hillier.de/bvsim5-ethtool-e.txt http://www.hillier.de/bvsim5-lspci-t.txt http://www.hillier.de/bvsim5-lspci-vvv-xxxx.txt http://www.hillier.de/bvsim3-ethtool-e.txt http://www.hillier.de/bvsim3-lspci-t.txt http://www.hillier.de/bvsim3-lspci-vvv-xxxx.txt All commands were run in the error case, i.e. after e1000e said "Hardware error". > BIOS "IPMI" menus (I know you already gave us one, but both > would be good) BVSIM3 shows the IPMI menu I already provided BVSIM5 shows no IPMI menu Thanks in advance! -- With kind regards, Gernot Hillier Siemens AG, CT SE 2, Corporate Competence Center Embedded Linux -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/