Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753358AbYJTWIj (ORCPT ); Mon, 20 Oct 2008 18:08:39 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752050AbYJTWI2 (ORCPT ); Mon, 20 Oct 2008 18:08:28 -0400 Received: from connectmail.carleton.ca ([134.117.2.12]:59559 "EHLO connectmail.carleton.ca" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751331AbYJTWIY (ORCPT ); Mon, 20 Oct 2008 18:08:24 -0400 Date: Mon, 20 Oct 2008 18:08:18 -0400 From: "M. Vefa Bicakci" Subject: Re: Regression in 2.6.27: "irq 18: nobody cared" on Toshiba Satellite A100 In-reply-to: <48FC38AE.3030007@suse.de> To: Stefan Assmann Cc: Sven-Thorsten Dietrich , Olaf Dabrunz , linux-kernel@vger.kernel.org Message-id: <48FD0152.60907@superonline.com> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 Content-transfer-encoding: 7BIT User-Agent: Mozilla-Thunderbird 2.0.0.17 (X11/20081018) References: <48FB3ED5.60904@superonline.com> <1224431722.26279.4.camel@sven.thebigcorporation.com> <48FB6321.7030501@superonline.com> <48FC38AE.3030007@suse.de> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 48758 Lines: 1002 Stefan Assmann wrote: > M. Vefa Bicakci wrote: >> Sven-Thorsten Dietrich wrote: >>> On Sun, 2008-10-19 at 10:06 -0400, M. Vefa Bicakci wrote: >>>> Hello, >>>> >>>> As you might guess from the subject line, since I started to use 2.6.27-rcX >>>> series, I began to get "irq 18: nobody cared" messages in dmesg. Currently I am >>>> using 2.6.27.2 with Sidux on this laptop, which is a Toshiba Satellite A100. >>>> I have reproduced this problem with vanilla and sidux's kernels. >>>> >>> Can you provide the contents of /proc/interrupts? > > Could you provide the following: > - output of lspci -nn > - dmesg output with kernel commandline option apic=debug The dmesg output with "apic=debug" is appended to this e-mail. Please note that since the regression needs quite a few hours with the computer doing nothing to show itself, this dmesg output does not include the "nobody cared" message. If you need the dmesg output to contain the "nobody cared" message, then please let me know. Here's the output of "lspci -nn": === 8< === 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02) 05:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) 07:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039] 07:06.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] 07:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b] 07:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] 07:08.0 Ethernet controller [0200]: Intel Corporation PRO/100 VE Network Connection [8086:1092] (rev 02) === >8 === >> My computer is currently in the "nobody cared" state. Here are the current >> contents of /proc/interrupts: >> >> --- 8< --- >> CPU0 CPU1 >> 0: 45249492 60399 IO-APIC-edge timer >> 1: 25451 0 IO-APIC-edge i8042 >> 8: 1 0 IO-APIC-edge rtc0 >> 9: 36514 0 IO-APIC-fasteoi acpi >> 12: 1147983 2103 IO-APIC-edge i8042 >> 14: 170245 0 IO-APIC-edge ata_piix >> 15: 558085 819 IO-APIC-edge ata_piix >> 16: 508 0 IO-APIC-fasteoi uhci_hcd:usb5, i915@pci:0000:00:02.0 >> 17: 1353 0 IO-APIC-fasteoi firewire_ohci >> 18: 300158 1 IO-APIC-fasteoi uhci_hcd:usb4, tifm_7xx1, yenta >> 19: 0 0 IO-APIC-fasteoi uhci_hcd:usb3 >> 20: 26606 2 IO-APIC-fasteoi eth0 >> 22: 3206279 1 IO-APIC-fasteoi HDA Intel >> 23: 3 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb2 >> 220: 2105545 0 PCI-MSI-edge iwl3945 >> NMI: 0 0 Non-maskable interrupts >> LOC: 5971997 27874747 Local timer interrupts >> RES: 938710 1791498 Rescheduling interrupts >> CAL: 138135 180813 function call interrupts >> TLB: 48455 64413 TLB shootdowns >> TRM: 0 0 Thermal event interrupts >> SPU: 0 0 Spurious interrupts >> ERR: 0 >> MIS: 0 >> --- >8 --- > > Nothing unusual at first glance. How long did the system run? The computer had been booted at 15:24 on October 18th. I got the "nobody cared" message at 05:30 (am) on October 19th. The contents of "/proc/interrupts" that are quoted above were generated at about 12:40 (afternoon) on October 19th. There is one more thing I would like add. Last night, before going to sleep, I wrote a simple bash script which, every two seconds, recorded the contents of "/proc/interrupts" to a directory into a "ramfs" mount-point. (I chose "ramfs" because I thought that "ramfs" would not interfere with the "swapper" process which is shown as the reason in all of the "nobody cared" messsages.) Interestingly, when I woke up today, the dmesg contents did *not* contain any "nobody cared" messages. So I hit Ctrl-C and ended the execution of the script. I then left the computer alone and went on to do other things. And guess what, about four-five hours after I ended the script, I got the "nobody cared" message. So it looks like the computer really needs to be doing "nothing" in order to get this "nobody cared" message. Unfortunately, all of this happened without the "apic=debug" command line option. Tonight, I am going to leave the computer on with the "apic=debug" command line option and without anything running. Finally, I would like to say that I appreciate your help. Regards, M. Vefa Bicakci Note: dmesg output with "apic=debug" follows: === 8< === Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.2 (root@debian) (gcc version 4.3.2 (Debian 4.3.2-1) ) #1 SMP PREEMPT Sat Oct 18 20:19:36 EDT 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005f670000 (usable) BIOS-e820: 000000005f670000 - 000000005f700000 (ACPI NVS) BIOS-e820: 000000005f700000 - 0000000060000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) last_pfn = 0x5f670 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 38000000 @ 7000-c000 RAMDISK: 37806000 - 37fef4eb DMI present. ACPI: RSDP 000F6510, 0014 (r0 TOSINV) ACPI: RSDT 5F67E201, 0048 (r1 TOSINV Capell00 6040000 LTP 0) ACPI: FACP 5F685DEE, 0074 (r1 TOSINV CALISTGA 6040000 LOHR 5A) ACPI: DSDT 5F67F8B6, 6538 (r1 TOSINV CALISTGA 6040000 INTL 20050624) ACPI: FACS 5F686FC0, 0040 ACPI: APIC 5F685E62, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: HPET 5F685ECA, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: MCFG 5F685F02, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) ACPI: BOOT 5F685FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: APIC 5F685F70, 0068 (r1 TOSINV APIC 6040000 LTP 0) ACPI: SSDT 5F67F263, 064F (r1 SataRe SataPri 1000 INTL 20050624) ACPI: SSDT 5F67EBD1, 0692 (r1 SataRe SataSec 1000 INTL 20050624) ACPI: SSDT 5F67E249, 04F6 (r1 PmRef CpuPm 3000 INTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: DMI detected: Toshiba 630MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00008000 - 0000f000 (9 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000509420] TEXT DATA BSS ==> [0000100000 - 0000509420] #4 [0037806000 - 0037fef4eb] RAMDISK ==> [0037806000 - 0037fef4eb] #5 [000050a000 - 000050d000] INIT_PG_TABLE ==> [000050a000 - 000050d000] #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00f65c0] 000f65c0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x0005f670 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0005f670 On node 0 totalpages: 390671 free_area_init_node: node 0, pgdat c042db80, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 160131 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 68000000 (gap: 60000000:80000000) PERCPU: Allocating 41220 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387618 Kernel command line: root=/dev/mapper/root ro apic=debug Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 4096 (order: 12, 16384 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 1828.727 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1536480k/1563072k available (2406k kernel code, 25412k reserved, 933k data, 320k init, 645568k highmem) virtual kernel memory layout: fixmap : 0xffe18000 - 0xfffff000 (1948 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0449000 - 0xc0499000 ( 320 kB) .data : 0xc0359b08 - 0xc0443200 ( 933 kB) .text : 0xc0100000 - 0xc0359b08 (2406 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.45 BogoMIPS (lpj=1828727) Security Framework initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 Getting VERSION: 50014 Getting VERSION: 50014 Getting ID: 0 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ESR value before enabling vector: 0x00000040 after: 0x00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 1-0 not connected. IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected. ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1039050 ... PM timer delta = 357950 ... PM timer result ok ..... delta 1039050 ..... mult: 44633642 ..... calibration result: 166248 ..... CPU clock speed is 1828.0727 MHz. ..... host bus clock speed is 166.0248 MHz. Booting processor 1/1 ip 6000 Initializing CPU#1 masked ExtINT on CPU#1 Calibrating delay using timer specific routine.. 3657.34 BogoMIPS (lpj=1828671) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7314.79 BogoMIPS). net_namespace: 792 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:02.0 reg 10 32bit mmio: [dc100000, dc17ffff] PCI: 0000:00:02.0 reg 14 io port: [1800, 1807] PCI: 0000:00:02.0 reg 18 32bit mmio: [c0000000, cfffffff] PCI: 0000:00:02.0 reg 1c 32bit mmio: [dc200000, dc23ffff] PCI: 0000:00:02.1 reg 10 32bit mmio: [dc180000, dc1fffff] PCI: 0000:00:1b.0 reg 10 64bit mmio: [dc240000, dc243fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [1820, 183f] PCI: 0000:00:1d.1 reg 20 io port: [1840, 185f] PCI: 0000:00:1d.2 reg 20 io port: [1860, 187f] PCI: 0000:00:1d.3 reg 20 io port: [1880, 189f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [dc444000, dc4443ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO PCI: 0000:00:1f.2 reg 10 io port: [0, 7] PCI: 0000:00:1f.2 reg 14 io port: [0, 3] PCI: 0000:00:1f.2 reg 18 io port: [0, 7] PCI: 0000:00:1f.2 reg 1c io port: [0, 3] PCI: 0000:00:1f.2 reg 20 io port: [18b0, 18bf] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 20 io port: [18c0, 18df] PCI: bridge 0000:00:1c.1 io port: [2000, 2fff] PCI: bridge 0000:00:1c.1 32bit mmio: [d8000000, d9ffffff] PCI: bridge 0000:00:1c.1 64bit mmio pref: [d2000000, d3ffffff] PCI: 0000:05:00.0 reg 10 32bit mmio: [da000000, da000fff] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold pci 0000:05:00.0: PME# disabled Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.2. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:1c.2 io port: [3000, 3fff] PCI: bridge 0000:00:1c.2 32bit mmio: [da000000, dbffffff] PCI: bridge 0000:00:1c.2 64bit mmio pref: [d4000000, d5ffffff] PCI: 0000:07:06.0 reg 10 32bit mmio: [0, fff] pci 0000:07:06.0: supports D1 pci 0000:07:06.0: supports D2 pci 0000:07:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:07:06.0: PME# disabled PCI: 0000:07:06.1 reg 10 32bit mmio: [dc006000, dc0067ff] PCI: 0000:07:06.1 reg 14 32bit mmio: [dc000000, dc003fff] pci 0000:07:06.1: supports D1 pci 0000:07:06.1: supports D2 pci 0000:07:06.1: PME# supported from D0 D1 D2 D3hot pci 0000:07:06.1: PME# disabled PCI: 0000:07:06.2 reg 10 32bit mmio: [dc004000, dc004fff] pci 0000:07:06.2: supports D1 pci 0000:07:06.2: supports D2 pci 0000:07:06.2: PME# supported from D0 D1 D2 D3hot pci 0000:07:06.2: PME# disabled PCI: 0000:07:06.3 reg 10 32bit mmio: [dc006800, dc0068ff] pci 0000:07:06.3: supports D1 pci 0000:07:06.3: supports D2 pci 0000:07:06.3: PME# supported from D0 D1 D2 D3hot pci 0000:07:06.3: PME# disabled PCI: 0000:07:08.0 reg 10 32bit mmio: [dc005000, dc005fff] PCI: 0000:07:08.0 reg 14 io port: [4000, 403f] pci 0000:07:08.0: supports D1 pci 0000:07:08.0: supports D2 pci 0000:07:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:07:08.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [4000, 4fff] PCI: bridge 0000:00:1e.0 32bit mmio: [dc000000, dc0fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: Power Resource [FN00] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered IOAPIC[0]: Set PCI routing entry (1-13 -> 0x91 -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set PCI routing entry (1-8 -> 0x69 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set PCI routing entry (1-1 -> 0x39 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set PCI routing entry (1-12 -> 0x89 -> IRQ 12 Mode:0 Active:0) pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing number of MP IRQ sources: 15. number of IO-APIC #1 registers: 24. testing the IO APIC....................... IO APIC #1...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0020 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 1 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 1 0 0 0 0 1 1 69 09 003 03 0 1 0 0 0 1 1 71 0a 003 03 0 0 0 0 0 1 1 79 0b 003 03 0 0 0 0 0 1 1 81 0c 003 03 1 0 0 0 0 1 1 89 0d 003 03 1 0 0 0 0 1 1 91 0e 003 03 0 0 0 0 0 1 1 99 0f 003 03 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz tracer: 772 pages allocated for 65536 entries of 48 bytes actual entries 65620 ACPI: RTC can wake from S4 system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved system 00:06: ioport range 0x400-0x401 has been reserved system 00:06: ioport range 0x680-0x69f has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0x1000-0x107f has been reserved system 00:06: ioport range 0x1180-0x11bf has been reserved system 00:06: ioport range 0x1640-0x164f has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x2000-0x2fff pci 0000:00:1c.1: MEM window: 0xd8000000-0xd9ffffff pci 0000:00:1c.1: PREFETCH window: 0x000000d2000000-0x000000d3ffffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.2: IO window: 0x3000-0x3fff pci 0000:00:1c.2: MEM window: 0xda000000-0xdbffffff pci 0000:00:1c.2: PREFETCH window: 0x000000d4000000-0x000000d5ffffff pci 0000:07:06.0: CardBus bridge, secondary bus 0000:08 pci 0000:07:06.0: IO window: 0x004400-0x0044ff pci 0000:07:06.0: IO window: 0x004800-0x0048ff pci 0000:07:06.0: PREFETCH window: 0x68000000-0x6bffffff pci 0000:07:06.0: MEM window: 0x6c000000-0x6fffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 pci 0000:00:1e.0: IO window: 0x4000-0x4fff pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff pci 0000:00:1e.0: PREFETCH window: 0x00000068000000-0x0000006bffffff IOAPIC[0]: Set PCI routing entry (1-17 -> 0xa9 -> IRQ 17 Mode:1 Active:1) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 IOAPIC[0]: Set PCI routing entry (1-16 -> 0xb1 -> IRQ 16 Mode:1 Active:1) pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 IOAPIC[0]: Set PCI routing entry (1-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1) pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:07:06.0: enabling device (0000 -> 0003) pci 0000:07:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [0, 0] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 io port: [2000, 2fff] bus: 03 index 1 mmio: [d8000000, d9ffffff] bus: 03 index 2 mmio: [d2000000, d3ffffff] bus: 03 index 3 mmio: [0, 0] bus: 05 index 0 io port: [3000, 3fff] bus: 05 index 1 mmio: [da000000, dbffffff] bus: 05 index 2 mmio: [d4000000, d5ffffff] bus: 05 index 3 mmio: [0, 0] bus: 07 index 0 io port: [4000, 4fff] bus: 07 index 1 mmio: [dc000000, dc0fffff] bus: 07 index 2 mmio: [68000000, 6bffffff] bus: 07 index 3 io port: [0, ffff] bus: 07 index 4 mmio: [0, ffffffffffffffff] bus: 08 index 0 io port: [4400, 44ff] bus: 08 index 1 io port: [4800, 48ff] bus: 08 index 2 mmio: [68000000, 6bffffff] bus: 08 index 3 mmio: [6c000000, 6fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs...<7>Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 done Freeing initrd memory: 8101k freed Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1224524394.863:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1757 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pci 0000:07:08.0: Firmware left e100 interrupts enabled; disabling pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pci_express 0000:00:1c.2:pcie03: allocate port service isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 320k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 ACPI: Transitioning device [FAN0] to D3 fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN0] (off) ACPI: SSDT 5F67E9A0, 01A8 (r1 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT 5F67E73F, 01DC (r1 PmRef Cpu0Cst 3001 INTL 20050624) ACPI: CPU0 (power states: C1[C1] C2[C2]) processor ACPI0007:00: registered as cooling_device1 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 5F67EB48, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050624) ACPI: SSDT 5F67E91B, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) Marking TSC unstable due to TSC halts in idle ACPI: CPU1 (power states: C1[C1] C2[C2]) processor ACPI0007:01: registered as cooling_device2 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (52 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Thermal Zone [TZ01] (56 C) ACPI: ACPI Dock Station Driver usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 IOAPIC[0]: Set PCI routing entry (1-23 -> 0xd9 -> IRQ 23 Mode:1 Active:1) uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected SCSI subsystem initialized libata version 3.00 loaded. sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.2 uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 IOAPIC[0]: Set PCI routing entry (1-19 -> 0xe1 -> IRQ 19 Mode:1 Active:1) uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.2 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.2 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-2: new low speed USB device using uhci_hcd and address 2 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.2 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.3 firewire_ohci 0000:07:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc444000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected firewire_ohci: Added fw-ohci device 0000:07:06.1, OHCI version 1.10 sdhci-pci 0000:07:06.3: SDHCI controller found [104c:803c] (rev 0) sdhci-pci 0000:07:06.3: PCI INT A -> GSI 18 (level, low) -> IRQ 18 mmc0: SDHCI controller on PCI [0000:07:06.3] using DMA IOAPIC[0]: Set PCI routing entry (1-20 -> 0xe9 -> IRQ 20 Mode:1 Active:1) e100 0000:07:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 hub 3-0:1.0: unable to enumerate USB device on port 2 e100 0000:07:08.0: PME# disabled e100: eth0: e100_probe: addr 0xdc005000, irq 20, MAC addr xx:xx:xx:xx:xx:xx usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27.2 ehci_hcd usb usb5: SerialNumber: 0000:00:1d.7 pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 pata_acpi 0000:00:1f.2: setting latency timer to 64 pata_acpi 0000:00:1f.2: PCI INT B disabled ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15 usb 3-2: new low speed USB device using uhci_hcd and address 3 ata1.00: ATA-6: TOSHIBA MK8032GSX, AS112M, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 firewire_core: created device fw0: GUID xxxxxxxxxxxxxxxx, S400 ata2.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.60, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8032GS AS11 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S 1.60 PQ: 0 ANSI: 5 usb 3-2: configuration #1 chosen from 1 choice Driver 'sr' needs updating - please use bus_type methods Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 usb 3-2: New USB device found, idVendor=0d62, idProduct=0004 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: USB Keyboard usb 3-2: Manufacturer: Darfon sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sda1 sda2 sda3 < sda5<6>usbcore: registered new interface driver hiddev sda6<6>input: Darfon USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input2 sda7<6>input,hidraw0: USB HID v1.10 Keyboard [Darfon USB Keyboard] on usb-0000:00:1d.2-2 sda8 sda9 > sd 0:0:0:0: [sda] Attached SCSI disk input: Darfon USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.1/input/input3 input,hiddev96,hidraw1: USB HID v1.10 Device [Darfon USB Keyboard] on usb-0000:00:1d.2-2 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com padlock: VIA PadLock not detected. padlock: VIA PadLock Hash Engine not detected. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. PM: Starting manual resume from disk EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds udevd version 125 started ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: AC Adapter [ADP0] (on-line) agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 ACPI: Lid Switch [LID] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6 ACPI: Power Button (CM) [PWRB] ACPI: Battery Slot [BAT0] (battery present) input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) acpi device:0a: registered as cooling_device3 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input8 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks iwl3945: Copyright(c) 2003-2008 Intel Corporation iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwl3945 0000:05:00.0: setting latency timer to 64 iwl3945: Detected Intel Wireless WiFi Link 3945ABG iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels phy0: Selected rate control algorithm 'iwl-3945-rs' iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) input: PC Speaker as /devices/platform/pcspkr/input/input9 intel_rng: FWH not detected iwl3945 0000:05:00.0: PCI INT A disabled Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, hpet irqs Yenta: ISA IRQ mask 0x0cf8, PCI irq 18 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff cs: IO port probe 0x4000-0x4fff: clean. pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff pcmcia: parent PCI bridge Memory window: 0x68000000 - 0x6bffffff tifm_7xx1 0000:07:06.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0x18c0-0x18df] conflicts with ACPI region SMBI [0x18c0-0x18cf] ACPI: Device needs an ACPI driver Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0 synaptics: Toshiba Satellite A100 detected, limiting rate to 40pps. input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10 IOAPIC[0]: Set PCI routing entry (1-22 -> 0x32 -> IRQ 22 Mode:1 Active:1) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: Unknown model for ALC861, trying auto-probe from BIOS... cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. EXT3 FS on dm-1, internal journal fuse init (API version 7.9) kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1999024k swap on /dev/mapper/suspend. Priority:-1 extents:1 across:1999024k ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team lp: driver loaded but no devices found ppdev: user-space parallel port driver Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ADDRCONF(NETDEV_UP): eth0: link is not ready iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwl3945 0000:05:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) firmware: requesting iwlwifi-3945-1.ucode Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX ADDRCONF(NETDEV_UP): wlan0: link is not ready ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' NET: Registered protocol family 17 ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' wlan0: authenticate with AP xx:xx:xx:xx:xx:xx wlan0: authenticated wlan0: associate with AP xx:xx:xx:xx:xx:xx wlan0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x11 status=0 aid=1) wlan0: associated wlan0 (WE) : Wireless Event too big (346) ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' wlan0: no IPv6 routers present ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' === >8 === I ran a "rmmod thermal" and then a "modprobe thermal" over here. It seems to stop the annoying messages. === 8< === thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (49 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Transitioning device [FAN0] to D0 ACPI: Unable to turn cooling device [f7413468] 'on' ACPI: Thermal Zone [TZ01] (50 C) CE: hpet increasing min_delta_ns to 15000 nsec wlan0: no IPv6 routers present === >8 === -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/