Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754788AbYKEHdT (ORCPT ); Wed, 5 Nov 2008 02:33:19 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751293AbYKEHdL (ORCPT ); Wed, 5 Nov 2008 02:33:11 -0500 Received: from eazy.amigager.de ([213.239.192.238]:37511 "EHLO eazy.amigager.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750929AbYKEHdK (ORCPT ); Wed, 5 Nov 2008 02:33:10 -0500 Date: Wed, 5 Nov 2008 08:33:08 +0100 From: Tino Keitel To: ibm-acpi-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org Subject: Fan level 7 after resume wit 2.6.28-rc3 Message-ID: <20081105073306.GA3132@x61> Mail-Followup-To: ibm-acpi-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.18 (2008-05-17) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1017 Lines: 40 Hi, I tried 2.6.28-rc3 (git a75952b) on my ThinkPad X61s, and now the fan runs at full speed after resume from suspend: $ cat /proc/acpi/ibm/fan status: enabled speed: 0 level: auto commands: level ( is 0-7, auto, disengaged, full-speed) commands: enable, disable commands: watchdog ( is 0 (off), 1-120 (seconds)) $ echo mem > /sys/power/state After resume: $ cat /proc/acpi/ibm/fan status: enabled speed: 4796 level: 7 commands: level ( is 0-7, auto, disengaged, full-speed) commands: enable, disable commands: watchdog ( is 0 (off), 1-120 (seconds)) Setting it back again to "auto" works. After the next suspend cycle, it is back to level 7. This doesn't happen with 2.6.27. Regards, Tino -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/