Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757526AbYKETtb (ORCPT ); Wed, 5 Nov 2008 14:49:31 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1756453AbYKETr4 (ORCPT ); Wed, 5 Nov 2008 14:47:56 -0500 Received: from yx-out-2324.google.com ([74.125.44.30]:12406 "EHLO yx-out-2324.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756768AbYKETrx (ORCPT ); Wed, 5 Nov 2008 14:47:53 -0500 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:subject:to:date:message-id:in-reply-to:references:user-agent :mime-version:content-type:content-transfer-encoding; b=SbPjcnuU+4ranOJIo3LDLPXJkwokEau+Wykj6OE4tmwRrB1a20ZEV9jcElKUFtcNh+ 5YIVxlJmDOOv4lX+T8aqw5BA9/WAUgfEYwgxNKhLg2l0oYP0L0AHQgrt/BoMivYGK2ii Wx463ZdjpuDEBHG1soa0YbSxgdm8iOIQCswV4= From: Jon Smirl Subject: [RFC PATCH V4 6/6] Microsoft mceusb2 driver for in-kernel IR subsystem To: linux-kernel@vger.kernel.org Date: Wed, 05 Nov 2008 14:47:48 -0500 Message-ID: <20081105194748.19407.6461.stgit@localhost> In-Reply-To: <20081105194640.19407.19682.stgit@localhost> References: <20081105194640.19407.19682.stgit@localhost> User-Agent: StGit/0.14.3.275.gdc7f MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 24741 Lines: 792 USB device commonly found on Microsoft Media Center boxes. Hardware can send and recieve at all common IR frequencies - 36K, 38K, 40K, 56K --- drivers/input/ir/Kconfig | 6 drivers/input/ir/Makefile | 1 drivers/input/ir/ir-mceusb2.c | 744 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 751 insertions(+), 0 deletions(-) create mode 100644 drivers/input/ir/ir-mceusb2.c diff --git a/drivers/input/ir/Kconfig b/drivers/input/ir/Kconfig index 172c0c6..b854900 100644 --- a/drivers/input/ir/Kconfig +++ b/drivers/input/ir/Kconfig @@ -17,5 +17,11 @@ config IR_GPT default m help Driver for GPT-based IR receiver found on Digispeaker + +config IR_MCEUSB2 + tristate "Microsoft Media Center Ed. Receiver, v2" + default m + help + Driver for the Microsoft Media Center Ed. Receiver, v2 endif diff --git a/drivers/input/ir/Makefile b/drivers/input/ir/Makefile index ab0da3f..0bdafb0 100644 --- a/drivers/input/ir/Makefile +++ b/drivers/input/ir/Makefile @@ -8,4 +8,5 @@ ir-objs := ir-core.o ir-configfs.o obj-$(CONFIG_IR_GPT) += ir-gpt.o +obj-$(CONFIG_IR_MCEUSB2) += ir-mceusb2.o diff --git a/drivers/input/ir/ir-mceusb2.c b/drivers/input/ir/ir-mceusb2.c new file mode 100644 index 0000000..898267a --- /dev/null +++ b/drivers/input/ir/ir-mceusb2.c @@ -0,0 +1,744 @@ +/* + * LIRC driver for Philips eHome USB Infrared Transceiver + * and the Microsoft MCE 2005 Remote Control + * + * (C) by Martin A. Blatter + * + * Transmitter support and reception code cleanup. + * (C) by Daniel Melander + * + * Derived from ATI USB driver by Paul Miller and the original + * MCE USB driver by Dan Corti + * + * This driver will only work reliably with kernel version 2.6.10 + * or higher, probably because of differences in USB device enumeration + * in the kernel code. Device initialization fails most of the time + * with earlier kernel versions. + * + ********************************************************************** + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include + +#define DRIVER_AUTHOR "Daniel Melander , " \ + "Martin Blatter " +#define DRIVER_DESC "Philips eHome USB IR Transceiver and Microsoft " \ + "MCE 2005 Remote Control driver" +#define DRIVER_NAME "ir_mceusb2" + +#define USB_BUFLEN 16 /* USB reception buffer length */ +#define LIRCBUF_SIZE 256 /* LIRC work buffer length */ + +/* MCE constants */ +#define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */ +#define MCE_TIME_BASE 50 /* Approx 50us resolution */ +#define MCE_CODE_LENGTH 5 /* Normal length of packet (with header) */ +#define MCE_PACKET_SIZE 4 /* Normal length of packet (without header) */ +#define MCE_PACKET_HEADER 0x84 /* Actual header format is 0x80 + num_bytes */ +#define MCE_CONTROL_HEADER 0x9F /* MCE status header */ +#define MCE_TX_HEADER_LENGTH 3 /* # of bytes in the initializing tx header */ +#define MCE_MAX_CHANNELS 2 /* Two transmitters, hardware dependent? */ +#define MCE_DEFAULT_TX_MASK 0x03 /* Val opts: TX1=0x01, TX2=0x02, ALL=0x03 */ +#define MCE_PULSE_BIT 0x80 /* Pulse bit, MSB set == PULSE else SPACE */ +#define MCE_PULSE_MASK 0x7F /* Pulse mask */ +#define MCE_MAX_PULSE_LENGTH 0x7F /* Longest transmittable pulse symbol */ +#define MCE_PACKET_LENGTH_MASK 0x7 /* Packet length */ + + +/* general constants */ +#define SEND_FLAG_IN_PROGRESS 1 +#define SEND_FLAG_COMPLETE 2 +#define RECV_FLAG_IN_PROGRESS 3 +#define RECV_FLAG_COMPLETE 4 + +#define PHILUSB_RECEIVE 1 +#define PHILUSB_SEND 2 + +#define VENDOR_PHILIPS 0x0471 +#define VENDOR_SMK 0x0609 +#define VENDOR_TATUNG 0x1460 +#define VENDOR_GATEWAY 0x107b +#define VENDOR_SHUTTLE 0x1308 +#define VENDOR_SHUTTLE2 0x051c +#define VENDOR_MITSUMI 0x03ee +#define VENDOR_TOPSEED 0x1784 +#define VENDOR_RICAVISION 0x179d +#define VENDOR_ITRON 0x195d +#define VENDOR_FIC 0x1509 +#define VENDOR_LG 0x043e +#define VENDOR_MICROSOFT 0x045e +#define VENDOR_FORMOSA 0x147a +#define VENDOR_FINTEK 0x1934 +#define VENDOR_PINNACLE 0x2304 + +static struct usb_device_id usb_remote_table[] = { + /* Philips eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_PHILIPS, 0x0815) }, + /* Philips Infrared Transceiver - HP branded */ + { USB_DEVICE(VENDOR_PHILIPS, 0x060c) }, + /* Philips SRM5100 */ + { USB_DEVICE(VENDOR_PHILIPS, 0x060d) }, + /* Philips Infrared Transceiver - Omaura */ + { USB_DEVICE(VENDOR_PHILIPS, 0x060f) }, + /* SMK/Toshiba G83C0004D410 */ + { USB_DEVICE(VENDOR_SMK, 0x031d) }, + /* SMK eHome Infrared Transceiver (Sony VAIO) */ + { USB_DEVICE(VENDOR_SMK, 0x0322) }, + /* bundled with Hauppauge PVR-150 */ + { USB_DEVICE(VENDOR_SMK, 0x0334) }, + /* Tatung eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_TATUNG, 0x9150) }, + /* Shuttle eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_SHUTTLE, 0xc001) }, + /* Shuttle eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_SHUTTLE2, 0xc001) }, + /* Gateway eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_GATEWAY, 0x3009) }, + /* Mitsumi */ + { USB_DEVICE(VENDOR_MITSUMI, 0x2501) }, + /* Topseed eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_TOPSEED, 0x0001) }, + /* Topseed HP eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_TOPSEED, 0x0006) }, + /* Topseed eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_TOPSEED, 0x0007) }, + /* Topseed eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_TOPSEED, 0x0008) }, + /* Ricavision internal Infrared Transceiver */ + { USB_DEVICE(VENDOR_RICAVISION, 0x0010) }, + /* Itron ione Libra Q-11 */ + { USB_DEVICE(VENDOR_ITRON, 0x7002) }, + /* FIC eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_FIC, 0x9242) }, + /* LG eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_LG, 0x9803) }, + /* Microsoft MCE Infrared Transceiver */ + { USB_DEVICE(VENDOR_MICROSOFT, 0x00a0) }, + /* Formosa eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_FORMOSA, 0xe015) }, + /* Formosa21 / eHome Infrared Receiver */ + { USB_DEVICE(VENDOR_FORMOSA, 0xe016) }, + /* Formosa aim / Trust MCE Infrared Receiver */ + { USB_DEVICE(VENDOR_FORMOSA, 0xe017) }, + /* Formosa Industrial Computing / Beanbag Emulation Device */ + { USB_DEVICE(VENDOR_FORMOSA, 0xe018) }, + /* Fintek eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_FINTEK, 0x0602) }, + /* Pinnacle Remote Kit */ + { USB_DEVICE(VENDOR_PINNACLE, 0x0225) }, + /* Terminating entry */ + { } +}; + +static struct usb_device_id pinnacle_list[] = { + { USB_DEVICE(VENDOR_PINNACLE, 0x0225) }, + {} +}; + +static struct usb_device_id xmit_inverted[] = { + { USB_DEVICE(VENDOR_SMK, 0x031d) }, + { USB_DEVICE(VENDOR_SMK, 0x0322) }, + { USB_DEVICE(VENDOR_SMK, 0x0334) }, + { USB_DEVICE(VENDOR_TOPSEED, 0x0001) }, + { USB_DEVICE(VENDOR_TOPSEED, 0x0007) }, + { USB_DEVICE(VENDOR_TOPSEED, 0x0008) }, + { USB_DEVICE(VENDOR_PINNACLE, 0x0225) }, + {} +}; + +/* data structure for each usb remote */ +struct irctl { + + /* usb */ + struct usb_device *usbdev; + struct urb *urb_in; + struct usb_endpoint_descriptor *usb_ep_in; + struct usb_endpoint_descriptor *usb_ep_out; + + /* buffers and dma */ + unsigned char *buf_in; + unsigned int len_in; + dma_addr_t dma_in; + dma_addr_t dma_out; + + struct { + u32 connected:1; + u32 pinnacle:1; + u32 transmitter_mask_inverted:1; + u32 reserved:29; + } flags; + + /* handle sending (init strings) */ + int send_flags; + int carrier; + char name[128]; + char phys[128]; + + struct { + unsigned int command, partial, delta, bit; + } last; + struct input_dev *input; +}; + +/* init strings */ +static char init1[] = {0x00, 0xff, 0xaa, 0xff, 0x0b}; +static char init2[] = {0xff, 0x18}; + +static char pin_init1[] = { 0x9f, 0x07}; +static char pin_init2[] = { 0x9f, 0x13}; +static char pin_init3[] = { 0x9f, 0x0d}; + +static void usb_send_callback(struct urb *urb, struct pt_regs *regs) +{ + struct irctl *ir = urb->context; + int len= urb->actual_length; + + dev_dbg(&ir->usbdev->dev, "usb_send_callback (status=%d len=%d)\n", urb->status, len); +#ifdef DEBUG + print_hex_dump_bytes("MCEUSB2 data: ", DUMP_PREFIX_NONE, urb->transfer_buffer, len); +#endif +} + + +static void usb_receive_callback(struct urb *urb, struct pt_regs *regs) +{ + struct irctl *ir = urb->context; + int len= urb->actual_length; + + dev_dbg(&ir->usbdev->dev, "usb_receive_callback (status=%d len=%d)\n", urb->status, len); +#ifdef DEBUG + print_hex_dump_bytes("MCEUSB2 data: ", DUMP_PREFIX_NONE, urb->transfer_buffer, len); +#endif +} + + +/* request incoming or send outgoing usb packet - used to initialize remote */ +static int request_packet_async(struct irctl *ir, struct usb_endpoint_descriptor *ep, + unsigned char *data, int size, int urb_type) +{ + int res; + struct urb *async_urb; + unsigned char *async_buf; + + switch (urb_type) { + case PHILUSB_SEND: + case PHILUSB_RECEIVE: + async_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!async_urb) { + dev_dbg(&ir->usbdev->dev, "Failed to allocate URB\n"); + return -ENOMEM; + } + /* alloc buffer */ + async_buf = kmalloc(size, GFP_KERNEL); + if (!async_buf) { + usb_free_urb(async_urb); + dev_dbg(&ir->usbdev->dev, "Failed to allocate async_buf\n"); + return -ENOMEM; + } + + if (urb_type == PHILUSB_SEND) { + /* outbound data */ + usb_fill_int_urb(async_urb, ir->usbdev, + usb_sndintpipe(ir->usbdev, ep->bEndpointAddress), + async_buf, size, (usb_complete_t) usb_send_callback, + ir, ep->bInterval); + + memcpy(async_buf, data, size); + dev_dbg(&ir->usbdev->dev, "request_packet_async called (size=%#x, send)\n", size); + } else { + /* inbound data */ + usb_fill_int_urb(async_urb, ir->usbdev, + usb_rcvintpipe(ir->usbdev, ep->bEndpointAddress), + async_buf, size, (usb_complete_t) usb_receive_callback, + ir, ep->bInterval); + dev_dbg(&ir->usbdev->dev, "request_packet_async called (size=%#x, receive)\n", size); + } + break; + default: + case 0: + /* standard request */ + async_urb = ir->urb_in; + ir->send_flags = RECV_FLAG_IN_PROGRESS; + dev_dbg(&ir->usbdev->dev, "request_packet_async called (size=%#x, standard)\n", size); + break; + } + + async_urb->transfer_buffer_length = size; + async_urb->dev = ir->usbdev; + + res = usb_submit_urb(async_urb, GFP_ATOMIC); + if (res) + dev_dbg(&ir->usbdev->dev, "request_packet_async (res=%d)\n", res); + return res; +} + +static void usb_remote_recv(struct urb *urb, struct pt_regs *regs) +{ + struct irctl *ir; + int buf_len; + int i, delta, bit; + + if (!urb) + return; + + ir = urb->context; + if (!ir) { + usb_unlink_urb(urb); + return; + } + buf_len = urb->actual_length; + +#ifdef DEBUG + print_hex_dump_bytes("MCEUSB2 data: ", DUMP_PREFIX_NONE, urb->transfer_buffer, buf_len); +#endif + + if (ir->send_flags == RECV_FLAG_IN_PROGRESS) { + ir->send_flags = SEND_FLAG_COMPLETE; + dev_dbg(&ir->usbdev->dev, "setup answer received %d bytes\n", buf_len); + } + switch (urb->status) { + /* success */ + case 0: + for (i = 0; i < buf_len;) { + if (ir->last.partial == 0) { + /* decode mce packets of the form (84),AA,BB,CC,DD */ + /* IR data packets can span USB messages - partial */ + ir->last.partial = (ir->buf_in[i] & MCE_PACKET_LENGTH_MASK); + ir->last.command = ir->buf_in[i] & ~MCE_PACKET_LENGTH_MASK; + i++; + } + for (; (ir->last.partial > 0) && (i < buf_len); i++) { + ir->last.partial--; + + if (ir->last.command == 0x80) { + bit = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0); + delta = (ir->buf_in[i] & MCE_PULSE_MASK) * MCE_TIME_BASE; + + if ((ir->buf_in[i] & MCE_PULSE_MASK) == 0x7f) { + if (ir->last.bit == bit) + ir->last.delta += delta; + else { + ir->last.delta = delta; + ir->last.bit = bit; + } + continue; + } + delta += ir->last.delta; + ir->last.delta = 0; + ir->last.bit = bit; + + dev_dbg(&ir->usbdev->dev, "bit %d delta %d\n", bit, delta); + input_ir_decode(ir->input, delta, bit); + } + } + } + break; + + /* unlink */ + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + usb_unlink_urb(urb); + return; + + case -EPIPE: + default: + break; + } + + /* resubmit urb */ + usb_submit_urb(urb, GFP_ATOMIC); +} + + +/* Sets the send carrier frequency */ +static int set_carrier(struct irctl *ir, int carrier) +{ + int clk = 10000000; + int prescaler = 0, divisor = 0; + unsigned char cmdbuf[] = { 0x9F, 0x06, 0x01, 0x80 }; + + /* Carrier is changed */ + if (ir->carrier != carrier) { + + if (carrier <= 0) { + ir->carrier = carrier; + dev_dbg(&ir->usbdev->dev, "SET_CARRIER disabling carrier modulation\n"); + request_packet_async(ir, ir->usb_ep_out, + cmdbuf, sizeof(cmdbuf), PHILUSB_SEND); + return carrier; + } + + for (prescaler = 0; prescaler < 4; ++prescaler) { + divisor = (clk >> (2 * prescaler)) / carrier; + if (divisor <= 0xFF) { + ir->carrier = carrier; + cmdbuf[2] = prescaler; + cmdbuf[3] = divisor; + dev_dbg(&ir->usbdev->dev, "SET_CARRIER requesting %d Hz\n", carrier); + + /* Transmit the new carrier to the mce + device */ + request_packet_async(ir, ir->usb_ep_out, + cmdbuf, sizeof(cmdbuf), PHILUSB_SEND); + return carrier; + } + } + return -EINVAL; + } + return carrier; +} + +static int send(void *private, unsigned int *buffer, unsigned int count, + unsigned int frequency, unsigned int xmitters) +{ + struct irctl *ir = (struct irctl *)private; + + int i, cmdcount = 0; + unsigned char cmdbuf[MCE_CMDBUF_SIZE]; /* MCE command buffer */ + unsigned long signal_duration = 0; /* Signal length in us */ + + if (!ir && !ir->usb_ep_out) + return -EFAULT; + + set_carrier(ir, frequency); + + /* MCE tx init header */ + cmdbuf[cmdcount++] = MCE_CONTROL_HEADER; + cmdbuf[cmdcount++] = 0x08; + cmdbuf[cmdcount++] = (ir->flags.transmitter_mask_inverted ? ~xmitters : xmitters) << 1; + + /* Generate mce packet data */ + for (i = 0; (i < count) && (cmdcount < MCE_CMDBUF_SIZE); i++) { + signal_duration += buffer[i]; + buffer[i] = buffer[i] / MCE_TIME_BASE; + + do { /* loop to support long pulses/spaces > 127*50us=6.35ms */ + + /* Insert mce packet header every 4th entry */ + if ((cmdcount < MCE_CMDBUF_SIZE) && (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH == 0) + cmdbuf[cmdcount++] = MCE_PACKET_HEADER; + + /* Insert mce packet data */ + if (cmdcount < MCE_CMDBUF_SIZE) + cmdbuf[cmdcount++] = (buffer[i] < MCE_PULSE_BIT ? buffer[i] : + MCE_MAX_PULSE_LENGTH) | (i & 1 ? 0x00 : MCE_PULSE_BIT); + else + return -EINVAL; + } while ((buffer[i] > MCE_MAX_PULSE_LENGTH) && (buffer[i] -= MCE_MAX_PULSE_LENGTH)); + } + + /* Fix packet length in last header */ + cmdbuf[cmdcount - (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH] = + 0x80 + (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH - 1; + + /* Check if we have room for the empty packet at the end */ + if (cmdcount >= MCE_CMDBUF_SIZE) + return -EINVAL; + + /* All mce commands end with an empty packet (0x80) */ + cmdbuf[cmdcount++] = 0x80; + + /* Transmit the command to the mce device */ + request_packet_async(ir, ir->usb_ep_out, cmdbuf, cmdcount, PHILUSB_SEND); + + return 0; +} + +static int usb_remote_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_host_interface *idesc; + struct usb_endpoint_descriptor *ep = NULL; + struct usb_endpoint_descriptor *ep_in = NULL; + struct usb_endpoint_descriptor *ep_out = NULL; + struct usb_host_config *config; + struct irctl *ir = NULL; + int i, devnum, pipe, maxp, ret, is_pinnacle; + + dev_dbg(&dev->dev, "usb probe called\n"); + + usb_reset_device(dev); + + config = dev->actconfig; + + idesc = intf->cur_altsetting; + + is_pinnacle = usb_match_id(intf, pinnacle_list) ? 1 : 0; + + /* step through the endpoints to find first bulk in and out endpoint */ + for (i = 0; i < idesc->desc.bNumEndpoints; ++i) { + ep = &idesc->endpoint[i].desc; + + if ((ep_in == NULL) + && ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + && (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) + || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT))) { + + dev_dbg(&dev->dev, "acceptable inbound endpoint found\n"); + ep_in = ep; + ep_in->bmAttributes = USB_ENDPOINT_XFER_INT; + + /* + * setting seems to 1 seem to cause issues with + * Pinnacle timing out on transfer. + */ + if (is_pinnacle) + ep_in->bInterval = ep->bInterval; + else + ep_in->bInterval = 1; + } + if ((ep_out == NULL) + && ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) + && (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) + || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT))) { + + dev_dbg(&dev->dev, "acceptable outbound endpoint found\n"); + ep_out = ep; + ep_out->bmAttributes = USB_ENDPOINT_XFER_INT; + + /* + * setting seems to 1 seem to cause issues with + * Pinnacle timing out on transfer. + */ + if (is_pinnacle) + ep_out->bInterval = ep->bInterval; + else + ep_out->bInterval = 1; + } + } + if (ep_in == NULL) { + dev_dbg(&dev->dev, "inbound and/or endpoint not found\n"); + return -ENODEV; + } + devnum = dev->devnum; + pipe = usb_rcvintpipe(dev, ep_in->bEndpointAddress); + maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); + + /* allocate kernel memory */ + ir = kzalloc(sizeof(struct irctl), GFP_KERNEL); + if (!ir) + return -ENOMEM; + + ir->buf_in = usb_buffer_alloc(dev, maxp, GFP_ATOMIC, &ir->dma_in); + if (!ir->buf_in) { + ret = -ENOMEM; + goto free_mem; + } + ir->urb_in = usb_alloc_urb(0, GFP_KERNEL); + if (!ir->urb_in) { + ret = -ENOMEM; + goto free_buffer; + } + + ir->usbdev = dev; + ir->len_in = maxp; + ir->flags.connected = 0; + ir->flags.pinnacle = is_pinnacle; + ir->flags.transmitter_mask_inverted = + usb_match_id(intf, xmit_inverted) ? 0 : 1; + + /* Saving usb interface data for use by the transmitter routine */ + ir->usb_ep_in = ep_in; + ir->usb_ep_out = ep_out; + + /* inbound data */ + usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in, + maxp, (usb_complete_t) usb_remote_recv, ir, ep_in->bInterval); + + /* initialize device */ + if (ir->flags.pinnacle) { + int usbret; + + /* + * I have no idea why but this reset seems to be crucial to + * getting the device to do outbound IO correctly - without + * this the device seems to hang, ignoring all input - although + * IR signals are correctly sent from the device, no input is + * interpreted by the device and the host never does the + * completion routine + */ + + usbret = usb_reset_configuration(dev); + dev_info(&dev->dev, "usb reset config ret %x\n", usbret); + + /* + * its possible we really should wait for a return + * for each of these... + */ + request_packet_async(ir, ep_in, NULL, maxp, PHILUSB_RECEIVE); + request_packet_async(ir, ep_out, pin_init1, sizeof(pin_init1), PHILUSB_SEND); + request_packet_async(ir, ep_in, NULL, maxp, PHILUSB_RECEIVE); + request_packet_async(ir, ep_out, pin_init2, sizeof(pin_init2), PHILUSB_SEND); + request_packet_async(ir, ep_in, NULL, maxp, PHILUSB_RECEIVE); + request_packet_async(ir, ep_out, pin_init3, sizeof(pin_init3), PHILUSB_SEND); + /* if we dont issue the correct number of receives + * (PHILUSB_RECEIVE) for each outbound, then the first few ir + * pulses will be interpreted by the usb_async_callback routine + * - we should ensure we have the right amount OR less - as the + * usb_remote_recv routine will handle the control packets OK - + * they start with 0x9f - but the async callback doesnt handle + * ir pulse packets + */ + request_packet_async(ir, ep_in, NULL, maxp, 0); + } else { + request_packet_async(ir, ep_in, NULL, maxp, PHILUSB_RECEIVE); + request_packet_async(ir, ep_out, init1, sizeof(init1), PHILUSB_SEND); + request_packet_async(ir, ep_in, NULL, maxp, PHILUSB_RECEIVE); + request_packet_async(ir, ep_out, init2, sizeof(init2), PHILUSB_SEND); + request_packet_async(ir, ep_in, NULL, maxp, 0); + } + usb_set_intfdata(intf, ir); + + ir->input = input_allocate_device(); + if (!ir->input) { + ret = -ENOMEM; + goto free_urb; + } + ret = input_ir_create(ir->input, ir, send); + if (ret) + goto free_input; + + ir->name[0] = '\0'; + if (dev->descriptor.iManufacturer) + usb_string(dev, dev->descriptor.iManufacturer, ir->name, sizeof(ir->name)); + i = strlen(ir->name); + ir->name[i++] = ' '; + if (dev->descriptor.iProduct) + usb_string(dev, dev->descriptor.iProduct, &ir->name[i], sizeof(ir->name) - i); + dev_info(&dev->dev, "%s\n", ir->name); + + ir->input->id.bustype = BUS_USB; + ir->input->id.vendor = le16_to_cpu(dev->descriptor.idVendor); + ir->input->id.product = le16_to_cpu(dev->descriptor.idProduct); + ir->input->name = ir->name; + usb_make_path(dev, ir->phys, sizeof(ir->phys)); + strlcat(ir->phys, "/input0", sizeof(ir->phys)); + ir->input->phys = ir->phys; + + ir->input->irbit[0] |= BIT_MASK(IR_CAP_RECEIVE_BASEBAND); + ir->input->irbit[0] |= BIT_MASK(IR_CAP_RECEIVE_36K); + ir->input->irbit[0] |= BIT_MASK(IR_CAP_RECEIVE_38K); + ir->input->irbit[0] |= BIT_MASK(IR_CAP_RECEIVE_40K); + ir->input->irbit[0] |= BIT_MASK(IR_CAP_RECEIVE_56K); + ir->input->irbit[0] |= BIT_MASK(IR_CAP_SEND_BASEBAND); + ir->input->irbit[0] |= BIT_MASK(IR_CAP_SEND_36K); + ir->input->irbit[0] |= BIT_MASK(IR_CAP_SEND_38K); + ir->input->irbit[0] |= BIT_MASK(IR_CAP_SEND_40K); + ir->input->irbit[0] |= BIT_MASK(IR_CAP_SEND_56K); + ir->input->irbit[0] |= BIT_MASK(IR_CAP_XMITTER_1); + ir->input->irbit[0] |= BIT_MASK(IR_CAP_XMITTER_2); + ir->input->irbit[0] |= BIT_MASK(IR_CAP_RECEIVE_RAW); + ir->input->irbit[0] |= BIT_MASK(IR_CAP_SEND_RAW); + + ret = input_register_device(ir->input); + if (ret) + goto free_input; + ret = input_ir_register(ir->input); + if (ret) + goto free_input; + + return 0; + +free_input: + input_ir_destroy(ir->input); + input_free_device(ir->input); +free_urb: + usb_free_urb(ir->urb_in); +free_buffer: + usb_buffer_free(dev, maxp, ir->buf_in, ir->dma_in); +free_mem: + kfree(ir); + dev_err(&dev->dev, "failed to load (code=%d)\n", ret); + return ret; +} + + +static void usb_remote_disconnect(struct usb_interface *intf) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct irctl *ir = usb_get_intfdata(intf); + + usb_set_intfdata(intf, NULL); + + if (!ir) + return; + + ir->usbdev = NULL; + input_ir_destroy(ir->input); + input_free_device(ir->input); + + usb_kill_urb(ir->urb_in); + usb_free_urb(ir->urb_in); + usb_buffer_free(dev, ir->len_in, ir->buf_in, ir->dma_in); +} + +static int usb_remote_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct irctl *ir = usb_get_intfdata(intf); + dev_dbg(&ir->usbdev->dev, "suspend\n"); + usb_kill_urb(ir->urb_in); + return 0; +} + +static int usb_remote_resume(struct usb_interface *intf) +{ + struct irctl *ir = usb_get_intfdata(intf); + dev_dbg(&ir->usbdev->dev, "resume\n"); + if (usb_submit_urb(ir->urb_in, GFP_ATOMIC)) + return -EIO; + return 0; +} + +static struct usb_driver usb_remote_driver = { + .name = DRIVER_NAME, + .probe = usb_remote_probe, + .disconnect = usb_remote_disconnect, + .suspend = usb_remote_suspend, + .resume = usb_remote_resume, + .id_table = usb_remote_table +}; + +static int __init usb_remote_init(void) +{ + int ret; + + ret = usb_register(&usb_remote_driver); + if (ret < 0) { + printk(DRIVER_NAME ": usb register failed, result = %d\n", ret); + return ret; + } + return 0; +} + +static void __exit usb_remote_exit(void) +{ + usb_deregister(&usb_remote_driver); +} + +module_init(usb_remote_init); +module_exit(usb_remote_exit); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(usb, usb_remote_table); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/