Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753590AbYK1Gzw (ORCPT ); Fri, 28 Nov 2008 01:55:52 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751474AbYK1Gzl (ORCPT ); Fri, 28 Nov 2008 01:55:41 -0500 Received: from mx3.schottelius.org ([77.109.138.221]:52946 "EHLO mx3.schottelius.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751149AbYK1Gze (ORCPT ); Fri, 28 Nov 2008 01:55:34 -0500 Date: Fri, 28 Nov 2008 07:33:55 +0100 From: Nico -telmich- Schottelius To: linux-next@vger.kernel.org Cc: LKML Subject: next-20081125: crypto hard disk gets unaccessable Message-ID: <20081128063355.GA4700@denkbrett.schottelius.org> Mail-Followup-To: Nico -telmich- Schottelius , linux-next@vger.kernel.org, LKML MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="i0/AhcQY5QxfSsSZ" Content-Disposition: inline User-Agent: echo $message | gpg -e $sender -s | netcat mailhost 25 X-Unix-Info: http://unix.schottelius.org/ X-Netzseite: http://nico.schottelius.org/ X-System-Info: ikn (Linux 2.6.28-rc6-next-20081125-denkbrett x86_64) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 141229 Lines: 2645 --i0/AhcQY5QxfSsSZ Content-Type: multipart/mixed; boundary="NzB8fVQJ5HfG6fxh" Content-Disposition: inline --NzB8fVQJ5HfG6fxh Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hello! After about four suspend & resume operations in the midst of editing a file, the system beeped twice and issued this error: [69186.618730] note: kcryptd[2848] exited with preempt_count 2 [full call trace attached] /dev/sda3 was mapped via cryptsetup luksOpen to /dev/mapper/home and also mounted an home. After that error, all accesses to /home hung. Access to / (provided by sda1) were still working. System is again the Lenovo X200, including sierra loaded and used. Sincerly, Nico --=20 Think about Free and Open Source Software (FOSS). http://nico.schottelius.org/documentations/foss/the-term-foss/ PGP: BFE4 C736 ABE5 406F 8F42 F7CF B8BE F92A 9885 188C --NzB8fVQJ5HfG6fxh Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="calltrace-2.6.28-next-20081125" Content-Transfer-Encoding: quoted-printable [ 0.000000] BIOS EBDA/lowmem at: 0009ec00/0009ec00 [ 0.000000] Linux version 2.6.28-rc6-next-20081125-denkbrett (compiler@i= kn) (gcc version 4.3.2 (Debian 4.3.2-1) ) #15 SMP PREEMPT Tue Nov 25 13:41:= 17 CET 2008 [ 0.000000] Command line: root=3D/dev/sda1 ro=20 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007c4a1000 (usable) [ 0.000000] BIOS-e820: 000000007c4a1000 - 000000007c4a7000 (reserved) [ 0.000000] BIOS-e820: 000000007c4a7000 - 000000007c5b7000 (usable) [ 0.000000] BIOS-e820: 000000007c5b7000 - 000000007c60f000 (reserved) [ 0.000000] BIOS-e820: 000000007c60f000 - 000000007c6c6000 (usable) [ 0.000000] BIOS-e820: 000000007c6c6000 - 000000007c6d1000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007c6d1000 - 000000007c6d4000 (ACPI data) [ 0.000000] BIOS-e820: 000000007c6d4000 - 000000007c6d8000 (reserved) [ 0.000000] BIOS-e820: 000000007c6d8000 - 000000007c6dc000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007c6dc000 - 000000007c6df000 (reserved) [ 0.000000] BIOS-e820: 000000007c6df000 - 000000007c706000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007c706000 - 000000007c708000 (ACPI data) [ 0.000000] BIOS-e820: 000000007c708000 - 000000007c90f000 (reserved) [ 0.000000] BIOS-e820: 000000007c90f000 - 000000007c99f000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007c99f000 - 000000007c9ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000007c9ff000 - 000000007ca00000 (usable) [ 0.000000] BIOS-e820: 000000007cc00000 - 000000007f000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn =3D 0x7ca00 max_arch_pfn =3D 0x3ffffffff [ 0.000000] init_memory_mapping: 0000000000000000-000000007ca00000 [ 0.000000] 0000000000 - 007ca00000 page 2M [ 0.000000] kernel direct mapping tables up to 7ca00000 @ 8000-b000 [ 0.000000] last_map_addr: 7ca00000 end: 7ca00000 [ 0.000000] ACPI: RSDP 000F73A0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT 7C97BD45, 009C (r1 LENOVO TP-6D 1050 LTP = 0) [ 0.000000] ACPI: FACP 7C97BF00, 00F4 (r3 LENOVO TP-6D 1050 LNVO = 1) [ 0.000000] ACPI: DSDT 7C97C2F4, D910 (r1 LENOVO TP-6D 1050 MSFT = 3000000) [ 0.000000] ACPI: FACS 7C98E000, 0040 [ 0.000000] ACPI: SSDT 7C97C0B4, 0240 (r1 LENOVO TP-6D 1050 MSFT = 3000000) [ 0.000000] ACPI: ECDT 7C989C04, 0052 (r1 LENOVO TP-6D 1050 LNVO = 1) [ 0.000000] ACPI: APIC 7C989C56, 0078 (r1 LENOVO TP-6D 1050 LNVO = 1) [ 0.000000] ACPI: MCFG 7C989CCE, 003C (r1 LENOVO TP-6D 1050 LNVO = 1) [ 0.000000] ACPI: HPET 7C989D0A, 0038 (r1 LENOVO TP-6D 1050 LNVO = 1) [ 0.000000] ACPI: SLIC 7C989DC2, 0176 (r1 LENOVO TP-6D 1050 LTP = 0) [ 0.000000] ACPI: BOOT 7C989F38, 0028 (r1 LENOVO TP-6D 1050 LTP = 1) [ 0.000000] ACPI: ASF! 7C989F60, 00A0 (r16 LENOVO TP-6D 1050 PTL = 1) [ 0.000000] ACPI: SSDT 7C98D203, 055F (r1 LENOVO TP-6D 1050 INTL = 20050513) [ 0.000000] ACPI: TCPA 7C707000, 0032 (r0 0 = 0) [ 0.000000] ACPI: DMAR 7C706000, 0120 (r1 =01 1 = 0) [ 0.000000] ACPI: SSDT 7C6D3000, 0655 (r1 PmRef CpuPm 3000 INTL = 20050624) [ 0.000000] ACPI: SSDT 7C6D2000, 0274 (r1 PmRef Cpu0Tst 3000 INTL = 20050624) [ 0.000000] ACPI: SSDT 7C6D1000, 0242 (r1 PmRef ApTst 3000 INTL = 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (5 early reservations) =3D=3D> bootmem [0000000000 - 007ca00= 000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page =3D=3D> [000= 0000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE =3D=3D> [000= 0006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00006cc60c] TEXT DATA BSS =3D=3D> [000= 0200000 - 00006cc60c] [ 0.000000] #3 [000009ec00 - 0000100000] BIOS reserved =3D=3D> [000= 009ec00 - 0000100000] [ 0.000000] #4 [0000008000 - 0000009000] PGTABLE =3D=3D> [000= 0008000 - 0000009000] [ 0.000000] found SMP MP-table at [ffff8800000f73e0] 000f73e0 [ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff88000120000= 0-ffff880002dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0007c4a1 [ 0.000000] 0: 0x0007c4a7 -> 0x0007c5b7 [ 0.000000] 0: 0x0007c60f -> 0x0007c6c6 [ 0.000000] 0: 0x0007c9ff -> 0x0007ca00 [ 0.000000] On node 0 totalpages: 509447 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1331 pages reserved [ 0.000000] DMA zone: 2611 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6923 pages used for memmap [ 0.000000] DMA32 zone: 498526 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f000000= :61000000) [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Tota= l pages: 501137 [ 0.000000] Kernel command line: root=3D/dev/sda1 ro=20 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2260.866 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 b= ytes) [ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 by= tes) [ 0.004000] Memory: 2000024k/2041856k available (2698k kernel code, 4068= k absent, 37036k reserved, 1306k data, 336k init) [ 0.004000] SLUB: Genslabs=3D12, HWalign=3D64, Order=3D0-3, MinObjects= =3D0, CPUs=3D2, Nodes=3D1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu t= imer [ 0.004000] Calibrating delay loop (skipped), value calculated using tim= er frequency.. 4521.73 BogoMIPS (lpj=3D9043464) [ 0.004000] Security Framework initialized [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] CPU0: Thermal monitoring enabled (TM2) [ 0.004000] using mwait in idle threads. [ 0.004000] ACPI: Core revision 20080926 [ 0.048087] Setting APIC routing to flat [ 0.048612] ..TIMER: vector=3D0x30 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D= -1 [ 0.090145] CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz steppi= ng 06 [ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4522.06 Bog= oMIPS (lpj=3D9044130) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.177246] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz steppi= ng 06 [ 0.178477] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.180025] Brought up 2 CPUs [ 0.180155] Total of 2 processors activated (9043.79 BogoMIPS). [ 0.180409] net_namespace: 1328 bytes [ 0.184030] regulator: core version 0.5 [ 0.184180] NET: Registered protocol family 16 [ 0.184219] ACPI FADT declares the system doesn't support PCIe ASPM, so = disable it [ 0.184224] ACPI: bus type pci registered [ 0.184375] PCI: Using configuration type 1 for base access [ 0.194968] ACPI: EC: EC description table is found, configuring boot EC [ 0.214969] ACPI: BIOS _OSI(Linux) query ignored [ 0.212021] ACPI: EC: non-query interrupt received, switching to interru= pt mode [ 0.235233] ACPI: Interpreter enabled [ 0.235365] ACPI: (supports S0 S3 S5) [ 0.235670] ACPI: Using IOAPIC for interrupt routing [ 0.276453] ACPI: EC: GPE =3D 0x11, I/O: command/status =3D 0x66, data = =3D 0x62 [ 0.276591] ACPI: EC: driver started in interrupt mode [ 0.281545] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.284332] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.284543] pci 0000:00:02.0: reg 10 64bit mmio: [0xf2000000-0xf23fffff] [ 0.284543] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.284543] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.284543] pci 0000:00:02.1: reg 10 64bit mmio: [0xf2400000-0xf24fffff] [ 0.284543] pci 0000:00:03.0: reg 10 64bit mmio: [0xf2826800-0xf282680f] [ 0.284543] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.284543] pci 0000:00:03.0: PME# disabled [ 0.284746] pci 0000:00:19.0: reg 10 32bit mmio: [0xf2600000-0xf261ffff] [ 0.284758] pci 0000:00:19.0: reg 14 32bit mmio: [0xf2625000-0xf2625fff] [ 0.284770] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f] [ 0.284816] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.284951] pci 0000:00:19.0: PME# disabled [ 0.285168] pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f] [ 0.285280] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f] [ 0.285392] pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf] [ 0.285507] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf2826c00-0xf2826fff] [ 0.285572] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.285708] pci 0000:00:1a.7: PME# disabled [ 0.285907] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2620000-0xf2623fff] [ 0.285960] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.286096] pci 0000:00:1b.0: PME# disabled [ 0.286307] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.286443] pci 0000:00:1c.0: PME# disabled [ 0.286656] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.286791] pci 0000:00:1c.1: PME# disabled [ 0.287010] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.288010] pci 0000:00:1c.3: PME# disabled [ 0.288239] pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df] [ 0.288351] pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff] [ 0.288463] pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f] [ 0.288577] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf2827000-0xf28273ff] [ 0.288643] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.288779] pci 0000:00:1d.7: PME# disabled [ 0.289187] pci 0000:00:1f.2: reg 10 io port: [0x1c48-0x1c4f] [ 0.289198] pci 0000:00:1f.2: reg 14 io port: [0x183c-0x183f] [ 0.289210] pci 0000:00:1f.2: reg 18 io port: [0x1c40-0x1c47] [ 0.289221] pci 0000:00:1f.2: reg 1c io port: [0x1838-0x183b] [ 0.289232] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f] [ 0.289243] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf2826000-0xf28267ff] [ 0.289271] pci 0000:00:1f.2: PME# supported from D3hot [ 0.289405] pci 0000:00:1f.2: PME# disabled [ 0.289585] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf2827400-0xf28274ff] [ 0.289612] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f] [ 0.289830] pci 0000:03:00.0: reg 10 64bit mmio: [0xf2500000-0xf2501fff] [ 0.289916] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.290056] pci 0000:03:00.0: PME# disabled [ 0.292112] pci 0000:00:1c.1: bridge 32bit mmio: [0xf2500000-0xf25fffff] [ 0.292196] pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] [ 0.292204] pci 0000:00:1c.3: bridge 32bit mmio: [0xf0000000-0xf1ffffff] [ 0.292216] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf2900000-0xf29f= ffff] [ 0.292304] pci 0000:00:1e.0: transparent bridge [ 0.292480] bus 00 -> node 0 [ 0.292500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.293406] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.293814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.294227] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.304462] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.308187] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.309374] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.310558] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.311742] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.312917] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.314100] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.315281] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.316200] ACPI: Power Resource [PUBS] (on) [ 0.317486] SCSI subsystem initialized [ 0.317694] libata version 3.00 loaded. [ 0.318074] PCI: Using ACPI for IRQ routing [ 0.328082] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.328442] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.354698] pnp: PnP ACPI init [ 0.354840] ACPI: bus type pnp registered [ 0.424807] pnp: PnP ACPI: found 10 devices [ 0.424939] ACPI: ACPI bus type pnp unregistered [ 0.425086] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.425222] system 00:00: iomem range 0xc0000-0xc3fff has been reserved [ 0.425357] system 00:00: iomem range 0xc4000-0xc7fff has been reserved [ 0.425491] system 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 0.425626] system 00:00: iomem range 0xcc000-0xcffff has been reserved [ 0.425761] system 00:00: iomem range 0xd0000-0xd3fff has been reserved [ 0.425896] system 00:00: iomem range 0xdc000-0xdffff could not be reser= ved [ 0.426031] system 00:00: iomem range 0xe0000-0xe3fff could not be reser= ved [ 0.426167] system 00:00: iomem range 0xe4000-0xe7fff could not be reser= ved [ 0.426302] system 00:00: iomem range 0xe8000-0xebfff could not be reser= ved [ 0.426438] system 00:00: iomem range 0xec000-0xeffff could not be reser= ved [ 0.426573] system 00:00: iomem range 0xf0000-0xfffff could not be reser= ved [ 0.426722] system 00:00: iomem range 0x100000-0x7effffff could not be r= eserved [ 0.426935] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be= reserved [ 0.427148] system 00:00: iomem range 0xfed4c000-0xffffffff could not be= reserved [ 0.427370] system 00:02: ioport range 0x164e-0x164f has been reserved [ 0.427505] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.427640] system 00:02: ioport range 0x1180-0x11ff has been reserved [ 0.427775] system 00:02: ioport range 0x800-0x80f has been reserved [ 0.427909] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 0.428044] system 00:02: ioport range 0x1600-0x1641 has been reserved [ 0.428179] system 00:02: ioport range 0x1600-0x161b has been reserved [ 0.428315] system 00:02: iomem range 0xe0000000-0xefffffff has been res= erved [ 0.428452] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been res= erved [ 0.428587] system 00:02: iomem range 0xfed10000-0xfed13fff has been res= erved [ 0.428724] system 00:02: iomem range 0xfed18000-0xfed18fff has been res= erved [ 0.428860] system 00:02: iomem range 0xfed19000-0xfed19fff has been res= erved [ 0.428996] system 00:02: iomem range 0xfed45000-0xfed4bfff has been res= erved [ 0.434601] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.434748] pci 0000:00:1c.0: IO window: disabled [ 0.434884] pci 0000:00:1c.0: MEM window: disabled [ 0.435017] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.435156] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.435288] pci 0000:00:1c.1: IO window: disabled [ 0.435425] pci 0000:00:1c.1: MEM window: 0xf2500000-0xf25fffff [ 0.435561] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.435699] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 0.435834] pci 0000:00:1c.3: IO window: 0x2000-0x2fff [ 0.435971] pci 0000:00:1c.3: MEM window: 0xf0000000-0xf1ffffff [ 0.436108] pci 0000:00:1c.3: PREFETCH window: 0x000000f2900000-0x0000= 00f29fffff [ 0.436326] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0d [ 0.436458] pci 0000:00:1e.0: IO window: disabled [ 0.436593] pci 0000:00:1e.0: MEM window: disabled [ 0.436727] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.436882] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.437020] pci 0000:00:1c.0: setting latency timer to 64 [ 0.437036] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.437173] pci 0000:00:1c.1: setting latency timer to 64 [ 0.437189] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.437326] pci 0000:00:1c.3: setting latency timer to 64 [ 0.437338] pci 0000:00:1e.0: setting latency timer to 64 [ 0.437345] bus: 00 index 0 io port: [0x00-0xffff] [ 0.437477] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.437611] bus: 02 index 0 mmio: [0x0-0x0] [ 0.437740] bus: 02 index 1 mmio: [0x0-0x0] [ 0.437869] bus: 02 index 2 mmio: [0x0-0x0] [ 0.437998] bus: 02 index 3 mmio: [0x0-0x0] [ 0.438128] bus: 03 index 0 mmio: [0x0-0x0] [ 0.438257] bus: 03 index 1 mmio: [0xf2500000-0xf25fffff] [ 0.438389] bus: 03 index 2 mmio: [0x0-0x0] [ 0.438518] bus: 03 index 3 mmio: [0x0-0x0] [ 0.438648] bus: 05 index 0 io port: [0x2000-0x2fff] [ 0.438793] bus: 05 index 1 mmio: [0xf0000000-0xf1ffffff] [ 0.438925] bus: 05 index 2 mmio: [0xf2900000-0xf29fffff] [ 0.439056] bus: 05 index 3 mmio: [0x0-0x0] [ 0.439185] bus: 0d index 0 mmio: [0x0-0x0] [ 0.439315] bus: 0d index 1 mmio: [0x0-0x0] [ 0.439444] bus: 0d index 2 mmio: [0x0-0x0] [ 0.439574] bus: 0d index 3 io port: [0x00-0xffff] [ 0.439705] bus: 0d index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.439851] NET: Registered protocol family 2 [ 0.486792] IP route cache hash table entries: 65536 (order: 7, 524288 b= ytes) [ 0.488015] TCP established hash table entries: 262144 (order: 10, 41943= 04 bytes) [ 0.490954] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.491937] TCP: Hash tables configured (established 262144 bind 65536) [ 0.492071] TCP reno registered [ 0.502859] NET: Registered protocol family 1 [ 0.503440] Simple Boot Flag at 0x35 set to 0x1 [ 0.505726] Microcode Update Driver: v2.00 = , Peter Oruba [ 0.511620] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.516989] VFS: Disk quotas dquot_6.5.2 [ 0.517284] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.518511] JFS: nTxBlock =3D 8192, nTxLock =3D 65536 [ 0.523648] msgmni has been set to 3907 [ 0.524220] io scheduler noop registered [ 0.524351] io scheduler anticipatory registered (default) [ 0.524483] io scheduler deadline registered [ 0.524759] io scheduler cfq registered [ 0.524910] pci 0000:00:02.0: Boot video device [ 0.525345] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.525402] pcieport-driver 0000:00:1c.0: found MSI capability [ 0.525580] pcieport-driver 0000:00:1c.0: irq 319 for MSI/MSI-X [ 0.525603] pci_express 0000:00:1c.0:pcie00: allocate port service [ 0.525690] pci_express 0000:00:1c.0:pcie02: allocate port service [ 0.525848] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.525904] pcieport-driver 0000:00:1c.1: found MSI capability [ 0.526075] pcieport-driver 0000:00:1c.1: irq 318 for MSI/MSI-X [ 0.526097] pci_express 0000:00:1c.1:pcie00: allocate port service [ 0.526185] pci_express 0000:00:1c.1:pcie02: allocate port service [ 0.526348] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.526403] pcieport-driver 0000:00:1c.3: found MSI capability [ 0.526574] pcieport-driver 0000:00:1c.3: irq 317 for MSI/MSI-X [ 0.526597] pci_express 0000:00:1c.3:pcie00: allocate port service [ 0.526678] pci_express 0000:00:1c.3:pcie02: allocate port service [ 0.527890] ACPI: AC Adapter [AC] (off-line) [ 0.550720] Switched to high resolution mode on CPU 1 [ 0.552017] Switched to high resolution mode on CPU 0 [ 0.560413] ACPI Warning (nspredef-0858): \_SB_.PCI0.LPC_.EC__.BAT0._BIF= : Return Package type mismatch at index 9 - found Buffer, expected String [= 20080926] [ 0.570012] ACPI: Battery Slot [BAT0] (battery present) [ 0.570425] input: Power Button (FF) as /class/input/input0 [ 0.570624] ACPI: Power Button (FF) [PWRF] [ 0.571013] input: Lid Switch as /class/input/input1 [ 0.572746] ACPI: Lid Switch [LID] [ 0.573052] input: Sleep Button (CM) as /class/input/input2 [ 0.573190] ACPI: Sleep Button (CM) [SLPB] [ 0.575272] ACPI: SSDT 7C6D6C20, 02C8 (r1 PmRef Cpu0Ist 3000 INTL = 20050624) [ 0.577174] ACPI: SSDT 7C6D4020, 087A (r1 PmRef Cpu0Cst 3001 INTL = 20050624) [ 0.586956] Monitor-Mwait will be used to enter C-1 state [ 0.586964] Monitor-Mwait will be used to enter C-2 state [ 0.586969] Monitor-Mwait will be used to enter C-3 state [ 0.586978] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.587448] processor ACPI_CPU:00: registered as cooling_device0 [ 0.587608] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.589290] ACPI: SSDT 7C6D5CA0, 01CF (r1 PmRef ApIst 3000 INTL = 20050624) [ 0.591008] ACPI: SSDT 7C6D5F20, 008D (r1 PmRef ApCst 3000 INTL = 20050624) [ 0.595996] Marking TSC unstable due to possible TSC halt in C2 [ 0.596234] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.596815] processor ACPI_CPU:01: registered as cooling_device1 [ 0.596954] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.649207] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.654034] ACPI: Thermal Zone [THM0] (22 C) [ 0.656752] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.659802] ACPI: Thermal Zone [THM1] (31 C) [ 0.777734] Linux agpgart interface v0.103 [ 1.000230] Clocksource tsc unstable (delta =3D -241799693 ns) [ 3.792273] floppy0: no floppy controllers found [ 3.797798] brd: module loaded [ 3.798225] Uniform Multi-Platform E-IDE driver [ 3.798756] ide-gd driver 1.18 [ 3.799476] Driver 'sd' needs updating - please use bus_type methods [ 3.799786] ahci 0000:00:1f.2: version 3.0 [ 3.799817] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 3.800035] ahci 0000:00:1f.2: irq 316 for MSI/MSI-X [ 3.800131] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x= 3 impl SATA mode [ 3.800346] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio= slum part=20 [ 3.800562] ahci 0000:00:1f.2: setting latency timer to 64 [ 3.800876] scsi0 : ahci [ 3.801345] scsi1 : ahci [ 3.801706] scsi2 : ahci [ 3.802100] scsi3 : ahci [ 3.803813] ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf282610= 0 irq 316 [ 3.804038] ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf282618= 0 irq 316 [ 3.804249] ata3: DUMMY [ 3.804376] ata4: DUMMY [ 4.120263] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.166382] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 4.166391] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 4.166662] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 4.166670] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 4.167606] ata1.00: ATA-8: ST9250827AS, 3.CMF, max UDMA/100 [ 4.167740] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.177447] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 4.177453] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 4.177712] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 4.177719] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 4.178703] ata1.00: configured for UDMA/100 [ 4.206081] ata1.00: configured for UDMA/100 [ 4.206220] ata1: EH complete [ 4.524264] ata2: SATA link down (SStatus 0 SControl 300) [ 4.540536] scsi 0:0:0:0: Direct-Access ATA ST9250827AS 3.= CM PQ: 0 ANSI: 5 [ 4.541348] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 = GB/232 GiB) [ 4.541590] sd 0:0:0:0: [sda] Write Protect is off [ 4.541722] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.541768] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 4.542101] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 = GB/232 GiB) [ 4.542337] sd 0:0:0:0: [sda] Write Protect is off [ 4.542469] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.542514] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 4.542730] sda: sda1 sda2 sda3 [ 4.600067] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.600670] Fusion MPT base driver 3.04.07 [ 4.600800] Copyright (c) 1999-2008 LSI Corporation [ 4.600947] Fusion MPT SPI Host driver 3.04.07 [ 4.602624] ieee1394: raw1394: /dev/raw1394 device initialized [ 4.603214] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 = irq 1,12 [ 4.613933] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.614089] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.614646] mice: PS/2 mouse device common for all mice [ 4.666263] oprofile: using NMI interrupt. [ 4.667084] TCP cubic registered [ 4.667215] NET: Registered protocol family 17 [ 4.669608] registered taskstats version 1 [ 4.670898] input: AT Translated Set 2 keyboard as /class/input/input3 [ 4.927745] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64. [ 5.245918] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 5.265211] input: TPPS/2 IBM TrackPoint as /class/input/input4 [ 5.467864] VFS: Mounted root (jfs filesystem) readonly. [ 5.468058] Freeing unused kernel memory: 336k freed [ 8.411176] Non-volatile memory driver v1.2 [ 8.633114] thinkpad_acpi: ThinkPad ACPI Extras v0.21 [ 8.633219] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 8.633319] thinkpad_acpi: ThinkPad BIOS 6DET28WW (1.05 ), EC 7XHT21WW-1= =2E03 [ 8.633423] thinkpad_acpi: Lenovo ThinkPad X200, model 7458AH8 [ 8.634040] thinkpad_acpi: radio switch found; radios are enabled [ 8.634262] thinkpad_acpi: This ThinkPad has standard ACPI backlight bri= ghtness control, supported by the ACPI video driver [ 8.634429] thinkpad_acpi: Disabling thinkpad-acpi brightness events by = default... [ 8.642597] Registered led device: tpacpi::thinklight [ 8.642729] Registered led device: tpacpi::power [ 8.642844] Registered led device: tpacpi:orange:batt [ 8.642963] Registered led device: tpacpi:green:batt [ 8.643079] Registered led device: tpacpi::dock_active [ 8.643194] Registered led device: tpacpi::bay_active [ 8.643308] Registered led device: tpacpi::dock_batt [ 8.643422] Registered led device: tpacpi::unknown_led [ 8.643535] Registered led device: tpacpi::standby [ 8.645631] thinkpad_acpi: Standard ACPI backlight interface available, = not loading native one. [ 8.646007] input: ThinkPad Extra Buttons as /class/input/input5 [ 8.672807] agpgart-intel 0000:00:00.0: Intel Mobile Intel? GM45 Express= Chipset [ 8.673866] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 8.676959] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 8.766075] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 [ 8.766181] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 8.766318] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ= 20 [ 8.766428] e1000e 0000:00:19.0: setting latency timer to 64 [ 8.766521] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [ 8.852063] usbcore: registered new interface driver usbfs [ 8.852190] usbcore: registered new interface driver hub [ 8.855386] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:16:= 09:46:11 [ 8.855549] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 8.855674] 0000:00:19.0: eth0: MAC: 6, PHY: 8, PBA No: 1008ff-0ff [ 8.885225] ACPI: WMI: Mapper loaded [ 8.892039] usbcore: registered new device driver usb [ 8.900060] uhci_hcd: USB Universal Host Controller Interface driver [ 8.900659] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 8.900767] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> I= RQ 20 [ 8.900877] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8.900880] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 8.901017] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus = number 1 [ 8.901212] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 8.901420] usb usb1: configuration #1 chosen from 1 choice [ 8.901544] hub 1-0:1.0: USB hub found [ 8.901647] hub 1-0:1.0: 2 ports detected [ 8.901840] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> I= RQ 21 [ 8.901948] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 8.901951] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 8.902069] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus = number 2 [ 8.902257] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 8.902423] usb usb2: configuration #1 chosen from 1 choice [ 8.902546] hub 2-0:1.0: USB hub found [ 8.902649] hub 2-0:1.0: 2 ports detected [ 8.903373] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 8.903481] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> I= RQ 22 [ 8.903589] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 8.903591] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 8.903714] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus = number 3 [ 8.903902] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 [ 8.904079] usb usb3: configuration #1 chosen from 1 choice [ 8.904201] hub 3-0:1.0: USB hub found [ 8.904305] hub 3-0:1.0: 2 ports detected [ 8.905053] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 8.905159] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> I= RQ 16 [ 8.905267] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8.905269] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 8.905394] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus = number 4 [ 8.905583] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 [ 8.905755] usb usb4: configuration #1 chosen from 1 choice [ 8.905878] hub 4-0:1.0: USB hub found [ 8.905984] hub 4-0:1.0: 2 ports detected [ 8.906165] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> I= RQ 17 [ 8.906273] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8.906276] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 8.906396] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus = number 5 [ 8.906584] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 [ 8.906752] usb usb5: configuration #1 chosen from 1 choice [ 8.906874] hub 5-0:1.0: USB hub found [ 8.906977] hub 5-0:1.0: 2 ports detected [ 8.907157] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> I= RQ 18 [ 8.907265] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8.907268] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 8.907389] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus = number 6 [ 8.907576] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 [ 8.907744] usb usb6: configuration #1 chosen from 1 choice [ 8.907866] hub 6-0:1.0: USB hub found [ 8.907969] hub 6-0:1.0: 2 ports detected [ 8.994725] acpi device:03: registered as cooling_device2 [ 8.995079] input: Video Bus as /class/input/input6 [ 9.028096] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 9.126010] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.126126] Warning! ehci_hcd should always be loaded before uhci_hcd an= d ohci_hcd, not after [ 9.127099] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 9.127218] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> I= RQ 23 [ 9.127357] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 9.127360] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 9.127507] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus = number 7 [ 9.131600] ehci_hcd 0000:00:1a.7: debug port 1 [ 9.131705] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 9.131721] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2826c00 [ 9.213019] usb 2-1: new full speed USB device using uhci_hcd and addres= s 2 [ 9.224017] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 9.224233] usb usb7: configuration #1 chosen from 1 choice [ 9.224360] hub 7-0:1.0: USB hub found [ 9.224474] hub 7-0:1.0: 6 ports detected [ 9.225013] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 9.225127] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> I= RQ 19 [ 9.225249] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 9.225252] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 9.225376] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus = number 8 [ 9.229440] ehci_hcd 0000:00:1d.7: debug port 1 [ 9.229557] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 9.229575] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2827000 [ 9.256042] cfg80211: Calling CRDA to update world regulatory domain [ 9.280450] hub 2-0:1.0: unable to enumerate USB device on port 1 [ 9.292014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 9.292226] usb usb8: configuration #1 chosen from 1 choice [ 9.292351] hub 8-0:1.0: USB hub found [ 9.292455] hub 8-0:1.0: 6 ports detected [ 9.418087] input: PC Speaker as /class/input/input7 [ 9.554849] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.= 3.27ks [ 9.555015] iwlagn: Copyright(c) 2003-2008 Intel Corporation [ 9.555187] vendor=3D8086 device=3D2942 [ 9.555287] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [ 9.555397] iwlagn 0000:03:00.0: setting latency timer to 64 [ 9.555433] iwlagn: Detected Intel Wireless WiFi Link 5300AGN REV=3D0x24 [ 9.584424] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels [ 9.613644] rtc_cmos 00:07: RTC can wake from S4 [ 9.613837] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 9.613964] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 9.621878] vendor=3D8086 device=3D2942 [ 9.621981] iwlagn 0000:03:00.0: PCI INT A disabled [ 9.622131] wmaster0 (iwlagn): not using net_device_ops yet [ 9.622412] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 9.626504] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) ->= IRQ 23 [ 9.795660] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> = IRQ 17 [ 9.795905] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.876254] usb 7-6: new high speed USB device using ehci_hcd and addres= s 4 [ 9.902146] wlan0 (iwlagn): not using net_device_ops yet [ 10.017092] usb 7-6: configuration #1 chosen from 1 choice [ 10.257092] usb 2-1: new full speed USB device using uhci_hcd and addres= s 3 [ 10.427664] usb 2-1: configuration #1 chosen from 1 choice [ 10.669257] usb 2-2: new full speed USB device using uhci_hcd and addres= s 4 [ 10.838641] usb 2-2: configuration #1 chosen from 1 choice [ 11.009360] Bluetooth: Core ver 2.13 [ 11.018740] NET: Registered protocol family 31 [ 11.018852] Bluetooth: HCI device and connection manager initialized [ 11.018967] Bluetooth: HCI socket layer initialized [ 11.086549] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 11.086739] usbcore: registered new interface driver btusb [ 13.612854] loop: module loaded [ 14.205133] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:= dm-devel@redhat.com [ 20.255989] alg: No test for stdrng (krng) [ 20.278719] alg: No test for stdrng (ansi_cprng) [ 34.021658] Adding 4982032k swap on /dev/mapper/swap. Priority:-1 exten= ts:1 across:4982032k [ 36.349598] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [ 36.405317] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [ 41.128632] NET: Registered protocol family 10 [ 41.130107] lo: Disabled Privacy Extensions [ 41.131313] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.002435] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is like= ly not the best way to go about it [ 44.002659] thinkpad_acpi: please consider using the driver defaults, an= d refer to up-to-date thinkpad-acpi documentation [ 44.068569] input: /usr/sbin/thinkpad-keys as /class/input/input8 [ 50.280071] warning: `avahi-daemon' uses 32-bit capabilities (legacy sup= port in use) [ 52.189090] Bluetooth: L2CAP ver 2.11 [ 52.189243] Bluetooth: L2CAP socket layer initialized [ 52.211628] Bluetooth: RFCOMM socket layer initialized [ 52.211817] Bluetooth: RFCOMM TTY layer initialized [ 52.211982] Bluetooth: RFCOMM ver 1.10 [ 52.637419] vendor=3D8086 device=3D2942 [ 52.637637] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [ 52.637855] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (w= as 0x100102, writing 0x100106) [ 52.637964] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X [ 52.638044] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.uco= de [ 54.991303] Registered led device: iwl-phy0:radio [ 54.991446] Registered led device: iwl-phy0:assoc [ 54.991581] Registered led device: iwl-phy0:RX [ 54.991721] Registered led device: iwl-phy0:TX [ 55.509252] iwlagn: Error sending REPLY_ADD_STA: time out after 500ms. [ 55.510310] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 70.824192] [drm] Initialized drm 1.1.0 20060810 [ 70.854786] pci 0000:00:02.0: power state changed by ACPI to D0 [ 70.854804] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 70.854813] pci 0000:00:02.0: setting latency timer to 64 [ 70.855326] pci 0000:00:02.0: irq 313 for MSI/MSI-X [ 70.855552] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 71.694831] set status page addr 0x08da0000 [ 2841.533757] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0x= e frozen [ 2841.533765] ata2: irq_stat 0x00000040, connection status changed [ 2841.533772] ata2: SError: { CommWake DevExch } [ 2841.533789] ata2: hard resetting link [ 2842.256287] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2842.402744] Monitor-Mwait will be used to enter C-3 state [ 2842.422003] thinkpad_acpi: unhandled HKEY event 0x6030 [ 2842.424278] ACPI: \_SB_.PCI0.SATA.PRT1 - docking [ 2842.427750] ata2.00: failed to IDENTIFY (I/O error, err_mask=3D0x100) [ 2842.496906] ACPI: \_SB_.GDCK - docking [ 2842.518162] ata2: hard resetting link [ 2842.660122] usb 7-5: new high speed USB device using ehci_hcd and addres= s 5 [ 2842.792616] usb 7-5: configuration #1 chosen from 1 choice [ 2842.792823] hub 7-5:1.0: USB hub found [ 2842.792887] hub 7-5:1.0: 4 ports detected [ 2842.836076] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2842.843020] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [ 2842.843862] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [ 2842.847537] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX10, max UDMA/133 [ 2842.855260] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [ 2842.856200] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [ 2842.859837] ata2.00: configured for UDMA/133 [ 2842.961849] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Contr= ol: RX/TX [ 2842.961852] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 2842.962142] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 2842.996920] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [ 2842.996928] ata2: irq_stat 0x40000001 [ 2843.005463] ata2.00: configured for UDMA/133 [ 2843.005472] ata2: EH complete [ 2843.009098] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX= 10 PQ: 0 ANSI: 5 [ 2843.068165] usb 7-5.4: new full speed USB device using ehci_hcd and addr= ess 6 [ 2843.168614] Driver 'sr' needs updating - please use bus_type methods [ 2843.174862] usb 7-5.4: configuration #1 chosen from 1 choice [ 2843.325884] usblp0: USB Bidirectional printer dev 6 if 0 alt 1 proto 2 v= id 0x03F0 pid 0x0B17 [ 2843.326546] usbcore: registered new interface driver usblp [ 2843.504294] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 = cdda tray [ 2843.504305] Uniform CD-ROM driver Revision: 3.20 [ 2843.504501] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2843.580303] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2843.580395] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2852.560863] hal_lpadmin[6955] general protection ip:44c404 sp:7fff75efa4= 00 error:0 in python2.5[400000+125000] [ 2860.241104] eth0: no IPv6 routers present [15305.222227] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 1 [15305.224440] wlan0 direct probe responded [15305.224447] wlan0: authenticate with AP 00:03:52:4d:bd:c1 [15305.420189] wlan0: authenticate with AP 00:03:52:4d:bd:c1 [15305.421958] wlan0: authenticated [15305.421962] wlan0: associate with AP 00:03:52:4d:bd:c1 [15305.424042] wlan0: RX AssocResp from 00:03:52:4d:bd:c1 (capab=3D0x421 st= atus=3D0 aid=3D2) [15305.424048] wlan0: associated [15305.429931] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [15315.896040] wlan0: no IPv6 routers present [15393.079122] wlan0: authenticate with AP 00:03:52:4d:bd:c1 [15393.277127] wlan0: authenticate with AP 00:03:52:4d:bd:c1 [15393.278920] wlan0: authenticated [15393.278926] wlan0: associate with AP 00:03:52:4d:bd:c1 [15393.283895] wlan0: RX AssocResp from 00:03:52:4d:bd:c1 (capab=3D0x421 st= atus=3D0 aid=3D2) [15393.283902] wlan0: associated [15410.161450] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [15410.217225] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [15410.218148] ADDRCONF(NETDEV_UP): eth0: link is not ready [15411.828833] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Contr= ol: RX/TX [15411.828841] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [15411.829588] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [15418.034813] tun: Universal TUN/TAP device driver, 1.6 [15418.034819] tun: (C) 1999-2004 Max Krasnyansky [15418.039539] tun0: Disabled Privacy Extensions [15425.232108] eth0: no IPv6 routers present [15430.435475] tun0: Disabled Privacy Extensions [15453.056477] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [15453.112119] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [15453.113028] ADDRCONF(NETDEV_UP): eth0: link is not ready [15454.660921] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Contr= ol: RX/TX [15454.660930] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [15454.661695] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [15470.125102] eth0: no IPv6 routers present [15484.652287] e1000e: eth0 NIC Link is Down [15484.661790] usb 7-5: USB disconnect, address 5 [15484.661796] usb 7-5.4: USB disconnect, address 6 [15484.661992] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0x= e frozen [15484.661998] ata2: irq_stat 0x00400040, connection status changed [15484.662005] ata2: SError: { PHYRdyChg DevExch } [15484.662074] ata2: hard resetting link [15484.666858] usblp0: removed [15485.334052] thinkpad_acpi: unhandled HKEY event 0x6030 [15485.385280] ata2: SATA link down (SStatus 0 SControl 300) [15490.384290] ata2: hard resetting link [15490.704284] ata2: SATA link down (SStatus 0 SControl 300) [15495.704076] ata2: hard resetting link [15496.024290] ata2: SATA link down (SStatus 0 SControl 300) [15496.024303] ata2.00: disabled [15496.024335] ata2: EH complete [15496.024379] ata2.00: detaching (SCSI 1:0:0:0) [15496.028120] ACPI: \_SB_.GDCK - undocking [15496.040895] ACPI: \_SB_.PCI0.SATA.PRT1 - docking [15496.041219] ACPI: Unable to dock! [15598.130592] wlan0: deauthenticated (Reason: 6) [15599.128084] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 1 [15599.328282] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 2 [15599.528276] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 3 [15599.728279] wlan0: direct probe to AP 00:03:52:4d:bd:c1 timed out [15635.262530] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1 [15635.460299] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2 [15635.660265] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3 [15635.860241] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out [15643.220187] wlan0: direct probe to AP 00:11:5c:d4:a3:50 try 1 [15643.420302] wlan0: direct probe to AP 00:11:5c:d4:a3:50 try 2 [15643.620321] wlan0: direct probe to AP 00:11:5c:d4:a3:50 try 3 [15643.820310] wlan0: direct probe to AP 00:11:5c:d4:a3:50 timed out [15647.939300] wlan0: direct probe to AP 00:11:5c:d4:a3:50 try 1 [15648.136307] wlan0: direct probe to AP 00:11:5c:d4:a3:50 try 2 [15648.336323] wlan0: direct probe to AP 00:11:5c:d4:a3:50 try 3 [15648.536273] wlan0: direct probe to AP 00:11:5c:d4:a3:50 timed out [15654.517102] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1 [15654.716278] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2 [15654.718580] wlan0 direct probe responded [15654.718587] wlan0: authenticate with AP 00:03:52:1b:f4:e1 [15654.916276] wlan0: authenticate with AP 00:03:52:1b:f4:e1 [15655.116355] wlan0: authenticate with AP 00:03:52:1b:f4:e1 [15655.316294] wlan0: authentication with AP 00:03:52:1b:f4:e1 timed out [15666.557180] vendor=3D8086 device=3D2942 [15666.557183] iwlagn 0000:03:00.0: PCI INT A disabled [15671.557618] vendor=3D8086 device=3D2942 [15671.557629] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [15671.557718] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (w= as 0x100102, writing 0x100106) [15671.557827] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X [15671.584261] Registered led device: iwl-phy0:radio [15671.584323] Registered led device: iwl-phy0:assoc [15671.584371] Registered led device: iwl-phy0:RX [15671.584416] Registered led device: iwl-phy0:TX [15671.603284] ADDRCONF(NETDEV_UP): wlan0: link is not ready [15671.605681] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1 [15671.804281] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2 [15672.004280] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3 [15672.204280] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out [15681.069378] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1 [15681.268268] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2 [15681.468128] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3 [15681.668284] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out [15701.859196] wlan0: direct probe to AP 00:03:52:4d:de:d1 try 1 [15702.057271] wlan0: direct probe to AP 00:03:52:4d:de:d1 try 2 [15702.059561] wlan0 direct probe responded [15702.059568] wlan0: authenticate with AP 00:03:52:4d:de:d1 [15702.061994] wlan0: authenticated [15702.062001] wlan0: associate with AP 00:03:52:4d:de:d1 [15702.260180] wlan0: associate with AP 00:03:52:4d:de:d1 [15702.262789] wlan0: RX AssocResp from 00:03:52:4d:de:d1 (capab=3D0x421 st= atus=3D0 aid=3D3) [15702.262797] wlan0: associated [15702.267428] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [15712.580120] wlan0: no IPv6 routers present [15837.147730] tun0: Disabled Privacy Extensions [16158.185047] tun0: Disabled Privacy Extensions [16800.685275] CE: hpet increasing min_delta_ns to 15000 nsec [16907.487594] wlan0: deauthenticated (Reason: 2) [16908.484273] wlan0: direct probe to AP 00:03:52:4d:de:d1 try 1 [16908.684268] wlan0: direct probe to AP 00:03:52:4d:de:d1 try 2 [16908.884269] wlan0: direct probe to AP 00:03:52:4d:de:d1 try 3 [16909.084269] wlan0: direct probe to AP 00:03:52:4d:de:d1 timed out [16913.346601] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1 [16913.349078] wlan0 direct probe responded [16913.349087] wlan0: authenticate with AP 00:03:52:1b:f4:e1 [16913.548326] wlan0: authenticate with AP 00:03:52:1b:f4:e1 [16913.550415] wlan0: authenticated [16913.550424] wlan0: associate with AP 00:03:52:1b:f4:e1 [16913.553924] wlan0: RX ReassocResp from 00:03:52:1b:f4:e1 (capab=3D0x21 s= tatus=3D0 aid=3D8) [16913.553932] wlan0: associated [17459.689363] wlan0: direct probe to AP 00:03:52:29:41:12 try 1 [17459.888266] wlan0: direct probe to AP 00:03:52:29:41:12 try 2 [17460.088331] wlan0: direct probe to AP 00:03:52:29:41:12 try 3 [17460.289046] wlan0: direct probe to AP 00:03:52:29:41:12 timed out [17464.046046] wlan0: direct probe to AP 00:03:52:1c:12:11 try 1 [17464.244077] wlan0: direct probe to AP 00:03:52:1c:12:11 try 2 [17464.444279] wlan0: direct probe to AP 00:03:52:1c:12:11 try 3 [17464.644265] wlan0: direct probe to AP 00:03:52:1c:12:11 timed out [17477.209800] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1 [17477.408300] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2 [17477.608336] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3 [17477.808271] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out [17481.919537] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1 [17482.116302] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2 [17482.316328] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3 [17482.516266] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out [17510.820330] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1 [17510.820820] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1 [17511.016060] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2 [17511.216065] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3 [17511.416265] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out [17530.855119] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 1 [17531.052302] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 2 [17531.252268] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 3 [17531.452081] wlan0: direct probe to AP 00:03:52:4d:c1:f1 timed out [17535.695381] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 1 [17535.696516] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 1 [17535.892270] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 2 [17536.092274] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 3 [17536.292274] wlan0: direct probe to AP 00:03:52:4d:c1:f1 timed out [17541.664743] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 1 [17541.666071] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 1 [17541.864311] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 2 [17542.064301] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 3 [17542.264275] wlan0: direct probe to AP 00:03:52:4d:c1:f1 timed out [17629.421889] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1 [17629.422353] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1 [17629.620306] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2 [17629.821267] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3 [17630.021266] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out [18179.742897] vendor=3D8086 device=3D2942 [18179.742900] iwlagn 0000:03:00.0: PCI INT A disabled [18193.030147] vendor=3D8086 device=3D2942 [18193.030159] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [18193.030248] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (w= as 0x100102, writing 0x100106) [18193.030357] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X [18193.056855] Registered led device: iwl-phy0:radio [18193.056910] Registered led device: iwl-phy0:assoc [18193.056956] Registered led device: iwl-phy0:RX [18193.059056] Registered led device: iwl-phy0:TX [18193.075476] ADDRCONF(NETDEV_UP): wlan0: link is not ready [18193.077752] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 1 [18193.276276] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 2 [18193.476312] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 3 [18193.676300] wlan0: direct probe to AP 00:03:52:4d:bd:c1 timed out [18304.966370] psmouse.c: TrackPoint at isa0060/serio1/input0 lost synchron= ization, throwing 1 bytes away. [18304.967665] vendor=3D8086 device=3D2942 [18304.967668] iwlagn 0000:03:00.0: PCI INT A disabled [18313.513145] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.= 3.27ks [18313.513153] iwlagn: Copyright(c) 2003-2008 Intel Corporation [18313.513329] vendor=3D8086 device=3D2942 [18313.513337] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [18313.513386] iwlagn 0000:03:00.0: setting latency timer to 64 [18313.513496] iwlagn: Detected Intel Wireless WiFi Link 5300AGN REV=3D0x24 [18313.543349] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels [18313.546075] wmaster0 (iwlagn): not using net_device_ops yet [18313.547593] phy1: Selected rate control algorithm 'iwl-agn-rs' [18313.547644] wlan0 (iwlagn): not using net_device_ops yet [18313.568716] vendor=3D8086 device=3D2942 [18313.572654] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [18313.572849] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X [18313.572921] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.uco= de [18315.784739] Registered led device: iwl-phy1:radio [18315.784985] Registered led device: iwl-phy1:assoc [18315.785225] Registered led device: iwl-phy1:RX [18315.785968] Registered led device: iwl-phy1:TX [18315.806220] ADDRCONF(NETDEV_UP): wlan0: link is not ready [18335.966763] wlan0: direct probe to AP 00:03:52:4d:de:d1 try 1 [18335.969035] wlan0 direct probe responded [18335.969042] wlan0: authenticate with AP 00:03:52:4d:de:d1 [18336.168271] wlan0: authenticate with AP 00:03:52:4d:de:d1 [18336.170239] wlan0: authenticated [18336.170247] wlan0: associate with AP 00:03:52:4d:de:d1 [18336.172563] wlan0: RX AssocResp from 00:03:52:4d:de:d1 (capab=3D0x421 st= atus=3D0 aid=3D3) [18336.172571] wlan0: associated [18336.177204] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [18346.232256] wlan0: no IPv6 routers present [18347.759910] tun0: Disabled Privacy Extensions [20268.634544] tun0: Disabled Privacy Extensions [20289.040251] tun0: Disabled Privacy Extensions [21217.789498] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0x= e frozen [21217.789506] ata2: irq_stat 0x00000040, connection status changed [21217.789513] ata2: SError: { CommWake DevExch } [21217.789530] ata2: hard resetting link [21218.512143] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [21218.670250] thinkpad_acpi: unhandled HKEY event 0x6030 [21218.673750] ACPI: \_SB_.PCI0.SATA.PRT1 - docking [21218.675459] ata2.00: failed to IDENTIFY (I/O error, err_mask=3D0x100) [21218.744731] ACPI: \_SB_.GDCK - docking [21218.765828] ata2: hard resetting link [21218.904153] usb 7-5: new high speed USB device using ehci_hcd and addres= s 7 [21219.037376] usb 7-5: configuration #1 chosen from 1 choice [21219.037619] hub 7-5:1.0: USB hub found [21219.037920] hub 7-5:1.0: 4 ports detected [21219.088071] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [21219.094748] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [21219.095592] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [21219.099346] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX10, max UDMA/133 [21219.106993] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [21219.107834] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [21219.111551] ata2.00: configured for UDMA/133 [21219.149795] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Contr= ol: RX/TX [21219.149798] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [21219.150114] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [21219.252515] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [21219.252519] ata2: irq_stat 0x40000001 [21219.261041] ata2.00: configured for UDMA/133 [21219.261046] ata2: EH complete [21219.264686] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX= 10 PQ: 0 ANSI: 5 [21219.308163] usb 7-5.4: new full speed USB device using ehci_hcd and addr= ess 8 [21219.402055] usb 7-5.4: configuration #1 chosen from 1 choice [21219.403287] usblp0: USB Bidirectional printer dev 8 if 0 alt 1 proto 2 v= id 0x03F0 pid 0x0B17 [21219.618168] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 = cdda tray [21219.618246] sr 1:0:0:0: Attached scsi CD-ROM sr0 [21219.618340] sr 1:0:0:0: Attached scsi generic sg1 type 5 [21226.151216] hal_lpadmin[32664] general protection ip:44c404 sp:7fff85c16= 120 error:0 in python2.5[400000+125000] [21233.980055] eth0: no IPv6 routers present [21243.909124] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1 [21244.108132] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2 [21244.308202] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3 [21244.508131] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out [21264.494910] psmouse.c: TrackPoint at isa0060/serio1/input0 lost synchron= ization, throwing 1 bytes away. [21296.648349] vendor=3D8086 device=3D2942 [21296.648361] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [21296.648548] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X [21296.675772] Registered led device: iwl-phy1:radio [21296.675835] Registered led device: iwl-phy1:assoc [21296.675883] Registered led device: iwl-phy1:RX [21296.675928] Registered led device: iwl-phy1:TX [21296.695131] ADDRCONF(NETDEV_UP): wlan0: link is not ready [32144.786555] PM: Syncing filesystems ... done. [32146.166548] Freezing user space processes ... (elapsed 0.02 seconds) don= e. [32146.188164] Freezing remaining freezable tasks ... (elapsed 0.00 seconds= ) done. [32146.188442] Suspending console(s) (use no_console_suspend to debug) [32146.204192] pci 0000:00:02.0: power state changed by ACPI to D3 [32146.205313] btusb_intr_complete: hci0 urb ffff880076050a80 failed to res= ubmit (2) [32147.128390] sd 0:0:0:0: [sda] Synchronizing SCSI cache [32147.128490] sd 0:0:0:0: [sda] Stopping disk [32149.560300] ehci_hcd 0000:00:1d.7: PCI INT D disabled [32149.579158] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [32149.579229] uhci_hcd 0000:00:1d.2: PCI INT C disabled [32149.579291] uhci_hcd 0000:00:1d.1: PCI INT B disabled [32149.579353] uhci_hcd 0000:00:1d.0: PCI INT A disabled [32149.592859] HDA Intel 0000:00:1b.0: PCI INT B disabled [32149.608130] ehci_hcd 0000:00:1a.7: PCI INT D disabled [32149.626762] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [32149.626830] uhci_hcd 0000:00:1a.2: PCI INT C disabled [32149.626894] uhci_hcd 0000:00:1a.1: PCI INT B disabled [32149.626956] uhci_hcd 0000:00:1a.0: PCI INT A disabled [32149.682920] e1000e 0000:00:19.0: PME# enabled [32149.682939] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [32149.682946] e1000e 0000:00:19.0: PME# enabled [32149.682950] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [32149.682959] e1000e 0000:00:19.0: PCI INT A disabled [32149.701901] ACPI: Preparing to enter system sleep state S3 [32149.722419] Disabling non-boot CPUs ... [32149.724661] CPU 1 is now offline [32149.724665] SMP alternatives: switching to UP code [32149.860398] CPU1 is down [32149.860491] Extended CMOS year: 2000 [32149.860491] Back to C! [32149.860491] Extended CMOS year: 2000 [32149.860491] Enabling non-boot CPUs ... [32149.860491] SMP alternatives: switching to SMP code [32149.966371] Booting processor 1 APIC 0x1 ip 0x6000 [32149.853824] Initializing CPU#1 [32149.853824] Calibrating delay using timer specific routine.. 4521.73 Bog= oMIPS (lpj=3D9043467) [32149.853824] CPU: L1 I cache: 32K, L1 D cache: 32K [32149.853824] CPU: L2 cache: 3072K [32149.853824] CPU: Physical Processor ID: 0 [32149.853824] CPU: Processor Core ID: 1 [32150.056509] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz steppi= ng 06 [32150.057012] Switched to high resolution mode on CPU 1 [32150.068312] CPU1 is up [32150.068314] ACPI: Waking up from system sleep state S3 [32150.110797] ACPI: EC: non-query interrupt received, switching to interru= pt mode [32150.159596] pci 0000:00:02.0: restoring config space at offset 0x1 (was = 0x900007, writing 0x900003) [32150.163455] pci 0000:00:02.0: restoring config space at offset 0x1 (was = 0x900403, writing 0x900003) [32150.163483] pci 0000:00:02.1: restoring config space at offset 0x1 (was = 0x900000, writing 0x900007) [32150.163495] pci 0000:00:03.0: restoring config space at offset 0xf (was = 0x100, writing 0x10b) [32150.163507] pci 0000:00:03.0: restoring config space at offset 0x1 (was = 0x100006, writing 0x180006) [32150.176153] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ= 20 [32150.176162] e1000e 0000:00:19.0: setting latency timer to 64 [32150.176171] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [32150.176178] e1000e 0000:00:19.0: PME# disabled [32150.176182] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [32150.176189] e1000e 0000:00:19.0: PME# disabled [32150.176239] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [32150.237278] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [32150.237289] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> I= RQ 20 [32150.237297] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [32150.237373] usb usb1: root hub lost power or was reset [32150.237400] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> I= RQ 21 [32150.237408] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [32150.237481] usb usb2: root hub lost power or was reset [32150.238459] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [32150.238468] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> I= RQ 22 [32150.238476] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [32150.238550] usb usb3: root hub lost power or was reset [32150.239491] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [32150.239502] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> I= RQ 23 [32150.239510] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [32150.252163] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1= (was 0x100106, writing 0x100102) [32150.252191] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> = IRQ 17 [32150.252201] HDA Intel 0000:00:1b.0: setting latency timer to 64 [32150.252252] pcieport-driver 0000:00:1c.0: restoring config space at offs= et 0x7 (was 0xf0, writing 0x200000f0) [32150.252270] pcieport-driver 0000:00:1c.0: restoring config space at offs= et 0x1 (was 0x100107, writing 0x100507) [32150.252320] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [32150.252359] pcieport-driver 0000:00:1c.1: restoring config space at offs= et 0x7 (was 0xf0, writing 0x200000f0) [32150.252377] pcieport-driver 0000:00:1c.1: restoring config space at offs= et 0x1 (was 0x100107, writing 0x100507) [32150.252428] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [32150.252476] pcieport-driver 0000:00:1c.3: restoring config space at offs= et 0x1 (was 0x100107, writing 0x100507) [32150.252527] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [32150.253409] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [32150.253418] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> I= RQ 16 [32150.253426] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [32150.253500] usb usb4: root hub lost power or was reset [32150.253524] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> I= RQ 17 [32150.253532] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [32150.253605] usb usb5: root hub lost power or was reset [32150.253629] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> I= RQ 18 [32150.253637] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [32150.253710] usb usb6: root hub lost power or was reset [32150.254581] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [32150.254592] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> I= RQ 19 [32150.254600] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [32150.254684] pci 0000:00:1e.0: restoring config space at offset 0xf (was = 0x40000, writing 0x400ff) [32150.254701] pci 0000:00:1e.0: restoring config space at offset 0x9 (was = 0x10001, writing 0x1fff1) [32150.254710] pci 0000:00:1e.0: restoring config space at offset 0x8 (was = 0x0, writing 0xfff0) [32150.254718] pci 0000:00:1e.0: restoring config space at offset 0x7 (was = 0x22800000, writing 0x228000f0) [32150.254736] pci 0000:00:1e.0: restoring config space at offset 0x1 (was = 0x100000, writing 0x100107) [32150.254757] pci 0000:00:1e.0: setting latency timer to 64 [32150.268135] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was= 0x2b00007, writing 0x2b00407) [32150.268189] ahci 0000:00:1f.2: setting latency timer to 64 [32150.284121] vendor=3D8086 device=3D2942 [32150.284126] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [32150.284305] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X [32150.303976] sd 0:0:0:0: [sda] Starting disk [32150.322551] Registered led device: iwl-phy1:radio [32150.322595] Registered led device: iwl-phy1:assoc [32150.322638] Registered led device: iwl-phy1:RX [32150.322680] Registered led device: iwl-phy1:TX [32150.592127] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [32150.598890] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [32150.599737] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [32150.611434] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [32150.612279] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [32150.616078] ata2.00: configured for UDMA/133 [32151.654217] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [32151.741724] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [32151.741730] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [32151.741905] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [32151.741910] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [32151.752810] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [32151.752816] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [32151.752992] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [32151.752997] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [32151.753893] ata1.00: configured for UDMA/100 [32151.755820] ata1.00: configured for UDMA/100 [32151.772115] ata1: EH complete [32151.772185] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 = GB/232 GiB) [32151.772216] sd 0:0:0:0: [sda] Write Protect is off [32151.772221] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [32151.772266] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [32151.772313] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 = GB/232 GiB) [32151.772340] sd 0:0:0:0: [sda] Write Protect is off [32151.772344] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [32151.772387] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [32151.880900] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Contr= ol: RX/TX [32151.880905] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [32153.148094] usb 7-6: reset high speed USB device using ehci_hcd and addr= ess 4 [32153.396075] usb 2-1: reset full speed USB device using uhci_hcd and addr= ess 3 [32153.656076] usb 2-2: reset full speed USB device using uhci_hcd and addr= ess 4 [32153.805340] pci 0000:00:02.0: power state changed by ACPI to D0 [32153.805373] pci 0000:00:02.0: restoring config space at offset 0x1 (was = 0x900403, writing 0x900003) [32153.805534] pci 0000:00:02.0: power state changed by ACPI to D0 [32153.805545] pci 0000:00:02.0: setting latency timer to 64 [32153.807884] pm_op(): usb_dev_resume+0x0/0x5 [usbcore] returns -19 [32153.807888] PM: Device 7-5 failed to resume: error -19 [32153.807928] pm_op(): usb_dev_resume+0x0/0x5 [usbcore] returns -19 [32153.807932] PM: Device 7-5.4 failed to resume: error -19 [32153.822623] Restarting tasks ... <6>usb 7-5: USB disconnect, address 7 [32153.822955] usb 7-5.4: USB disconnect, address 8 [32153.823489] usblp0: removed [32153.897558] done. [32157.884231] e1000e: eth0 NIC Link is Down [32159.608936] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Contr= ol: None [32159.608945] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [32159.609725] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [32176.216139] eth0: no IPv6 routers present [32182.827568] iwlagn: Radio Frequency Kill Switch is On: [32182.827571] Kill switch must be turned off for wireless networking to wo= rk. [32182.864230] usb 2-2: USB disconnect, address 4 [32182.866153] btusb_intr_complete: hci0 urb ffff880053c173c0 failed to res= ubmit (19) [32182.866979] btusb_send_frame: hci0 urb ffff8800214b6f00 submission failed [32199.232280] e1000e: eth0 NIC Link is Down [32199.237689] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0x= e frozen [32199.237695] ata2: irq_stat 0x00400040, connection status changed [32199.237702] ata2: SError: { PHYRdyChg DevExch } [32199.237716] ata2: hard resetting link [32199.914073] thinkpad_acpi: unhandled HKEY event 0x6030 [32199.960067] ata2: SATA link down (SStatus 0 SControl 300) [32202.308532] ata2: hard resetting link [32202.324993] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Contr= ol: None [32202.325022] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [32202.325787] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [32202.628289] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [32202.635517] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [32202.636519] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [32202.649810] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [32202.650804] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [32202.655367] ata2.00: configured for UDMA/133 [32202.766112] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [32202.766120] ata2: irq_stat 0x40000001 [32202.766132] ata2.00: disabled [32202.766142] ata2: hard resetting link [32203.185801] thinkpad_acpi: unhandled HKEY event 0x6030 [32203.416120] usb 7-5: new high speed USB device using ehci_hcd and addres= s 9 [32203.488074] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [32203.495633] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [32203.496565] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [32203.500585] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX10, max UDMA/133 [32203.508565] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [32203.509489] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [32203.513298] ata2.00: configured for UDMA/133 [32203.548711] usb 7-5: configuration #1 chosen from 1 choice [32203.548921] hub 7-5:1.0: USB hub found [32203.548981] hub 7-5:1.0: 4 ports detected [32203.625857] ata2: EH complete [32203.626100] ata2.00: detaching (SCSI 1:0:0:0) [32203.629388] ACPI: \_SB_.GDCK - undocking [32203.634172] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action= 0xe frozen [32203.634180] ata2.00: irq_stat 0x00400040, connection status changed [32203.634187] ata2: SError: { PHYRdyChg DevExch } [32203.634200] ata2.00: cmd a0/00:00:00:02:00/00:00:00:00:00/a0 tag 0 pio 1= 6388 in [32203.634203] cdb 51 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 [32203.634206] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 = (ATA bus error) [32203.634212] ata2.00: status: { DRDY ERR } [32203.634226] ata2: hard resetting link [32203.670815] ACPI: \_SB_.PCI0.SATA.PRT1 - docking [32203.671137] ACPI: Unable to dock! [32203.671476] ACPI: \_SB_.GDCK - docking [32203.671762] usb 7-5: USB disconnect, address 9 [32204.209379] ACPI: Unable to dock! [32204.492133] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [32204.499107] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [32204.499998] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [32204.511381] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [32204.512241] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [32204.516137] ata2.00: configured for UDMA/133 [32204.627765] ata2: EH complete [32219.500153] eth0: no IPv6 routers present [32221.534208] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX= 10 PQ: 0 ANSI: 5 [32221.538468] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 = cdda tray [32221.538641] sr 1:0:0:0: Attached scsi CD-ROM sr0 [32221.538837] sr 1:0:0:0: Attached scsi generic sg1 type 5 [39624.096057] usb 2-2: new full speed USB device using uhci_hcd and addres= s 5 [39624.263961] usb 2-2: configuration #1 chosen from 1 choice [39625.524475] Registered led device: iwl-phy1:radio [39625.524507] Registered led device: iwl-phy1:assoc [39625.524525] Registered led device: iwl-phy1:RX [39625.524544] Registered led device: iwl-phy1:TX [39631.401640] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 1 [39631.406110] wlan0 direct probe responded [39631.406116] wlan0: authenticate with AP 00:03:52:4d:bd:c1 [39631.604163] wlan0: authenticate with AP 00:03:52:4d:bd:c1 [39631.605962] wlan0: authenticated [39631.605967] wlan0: associate with AP 00:03:52:4d:bd:c1 [39631.608147] wlan0: RX AssocResp from 00:03:52:4d:bd:c1 (capab=3D0x21 sta= tus=3D0 aid=3D10) [39631.608153] wlan0: associated [39631.612065] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [39642.380094] wlan0: no IPv6 routers present [39645.060396] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [39645.116179] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [39645.117085] ADDRCONF(NETDEV_UP): eth0: link is not ready [39646.688938] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Contr= ol: RX/TX [39646.688946] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [39646.689714] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [39651.510635] tun0: Disabled Privacy Extensions [39660.393107] eth0: no IPv6 routers present [39664.256789] tun0: Disabled Privacy Extensions [39668.808229] e1000e: eth0 NIC Link is Down [39668.815689] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0x= e frozen [39668.815696] ata2: irq_stat 0x00400040, connection status changed [39668.815702] ata2: SError: { PHYRdyChg DevExch } [39668.815716] ata2: hard resetting link [39669.485695] thinkpad_acpi: unhandled HKEY event 0x6030 [39669.536320] ata2: SATA link down (SStatus 0 SControl 300) [39674.536272] ata2: hard resetting link [39674.856285] ata2: SATA link down (SStatus 0 SControl 300) [39679.856290] ata2: hard resetting link [39680.176283] ata2: SATA link down (SStatus 0 SControl 300) [39680.176297] ata2.00: disabled [39680.176327] ata2: EH complete [39680.176350] ata2.00: detaching (SCSI 1:0:0:0) [39680.176395] ACPI: \_SB_.GDCK - undocking [39680.206243] ACPI: \_SB_.PCI0.SATA.PRT1 - docking [39680.206568] ACPI: Unable to dock! [39780.682764] wlan0: deauthenticated (Reason: 2) [39781.680275] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 1 [39781.880276] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 2 [39782.080276] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 3 [39782.280271] wlan0: direct probe to AP 00:03:52:4d:bd:c1 timed out [39960.639480] wlan0: direct probe to AP 00:03:52:1c:12:11 try 1 [39960.836074] wlan0: direct probe to AP 00:03:52:1c:12:11 try 2 [39961.036289] wlan0: direct probe to AP 00:03:52:1c:12:11 try 3 [39961.038602] wlan0 direct probe responded [39961.038610] wlan0: authenticate with AP 00:03:52:1c:12:11 [39961.236097] wlan0: authenticate with AP 00:03:52:1c:12:11 [39961.436297] wlan0: authenticate with AP 00:03:52:1c:12:11 [39961.439835] wlan0: authenticated [39961.439843] wlan0: associate with AP 00:03:52:1c:12:11 [39961.636269] wlan0: associate with AP 00:03:52:1c:12:11 [39961.638592] wlan0: RX ReassocResp from 00:03:52:1c:12:11 (capab=3D0x421 = status=3D0 aid=3D1) [39961.638599] wlan0: associated [41912.884264] wlan0: No ProbeResp from current AP 00:03:52:1c:12:11 - assu= me out of range [42102.439437] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0x= e frozen [42102.439445] ata2: irq_stat 0x00000040, connection status changed [42102.439452] ata2: SError: { CommWake DevExch } [42102.439469] ata2: hard resetting link [42102.721044] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Contr= ol: RX/TX [42102.721054] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [42102.721838] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [42103.160287] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [42103.309644] thinkpad_acpi: unhandled HKEY event 0x6030 [42103.311923] ACPI: \_SB_.PCI0.SATA.PRT1 - docking [42103.314824] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 failed (Emask=3D0x100= Stat=3D0x00 Err=3D0x01) [42103.406914] ACPI: \_SB_.GDCK - docking [42103.441089] ata2: hard resetting link [42103.548102] usb 7-5: new high speed USB device using ehci_hcd and addres= s 11 [42103.681139] usb 7-5: configuration #1 chosen from 1 choice [42103.681338] hub 7-5:1.0: USB hub found [42103.681635] hub 7-5:1.0: 4 ports detected [42103.760039] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [42103.766328] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [42103.767167] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [42103.778192] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [42103.779034] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [42103.782723] ata2.00: configured for UDMA/133 [42103.906079] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [42103.906086] ata2: irq_stat 0x40000001 [42103.914541] ata2.00: configured for UDMA/133 [42103.914548] ata2: EH complete [42103.952194] usb 7-5.4: new full speed USB device using ehci_hcd and addr= ess 12 [42104.046152] usb 7-5.4: configuration #1 chosen from 1 choice [42104.048388] usblp0: USB Bidirectional printer dev 12 if 0 alt 1 proto 2 = vid 0x03F0 pid 0x0B17 [42118.356101] eth0: no IPv6 routers present [42120.858107] hal_lpadmin[29319] general protection ip:44c404 sp:7fffa0a4b= f60 error:0 in python2.5[400000+125000] [42163.900878] vendor=3D8086 device=3D2942 [42163.900891] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [42163.901104] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X [42163.927714] Registered led device: iwl-phy1:radio [42163.927777] Registered led device: iwl-phy1:assoc [42163.927825] Registered led device: iwl-phy1:RX [42163.927869] Registered led device: iwl-phy1:TX [42163.950262] ADDRCONF(NETDEV_UP): wlan0: link is not ready [50490.469268] RPC: Registered udp transport module. [50490.469275] RPC: Registered tcp transport module. [65537.060989] PM: Syncing filesystems ... done. [65537.993057] Freezing user space processes ... (elapsed 0.01 seconds) don= e. [65538.013249] Freezing remaining freezable tasks ... (elapsed 0.00 seconds= ) done. [65538.017376] Suspending console(s) (use no_console_suspend to debug) [65538.019994] btusb_intr_complete: hci0 urb ffff880074cf5900 failed to res= ubmit (2) [65538.288272] pci 0000:00:02.0: power state changed by ACPI to D3 [65538.964468] sd 0:0:0:0: [sda] Synchronizing SCSI cache [65538.964561] sd 0:0:0:0: [sda] Stopping disk [65541.372223] ehci_hcd 0000:00:1d.7: PCI INT D disabled [65541.388714] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [65541.388784] uhci_hcd 0000:00:1d.2: PCI INT C disabled [65541.388847] uhci_hcd 0000:00:1d.1: PCI INT B disabled [65541.388909] uhci_hcd 0000:00:1d.0: PCI INT A disabled [65541.404671] HDA Intel 0000:00:1b.0: PCI INT B disabled [65541.420190] ehci_hcd 0000:00:1a.7: PCI INT D disabled [65541.436953] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [65541.437021] uhci_hcd 0000:00:1a.2: PCI INT C disabled [65541.437083] uhci_hcd 0000:00:1a.1: PCI INT B disabled [65541.437146] uhci_hcd 0000:00:1a.0: PCI INT A disabled [65541.494921] e1000e 0000:00:19.0: PME# enabled [65541.494940] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [65541.494947] e1000e 0000:00:19.0: PME# enabled [65541.494951] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [65541.494961] e1000e 0000:00:19.0: PCI INT A disabled [65541.513401] ACPI: Preparing to enter system sleep state S3 [65541.533572] Disabling non-boot CPUs ... [65541.636023] CPU 1 is now offline [65541.636027] SMP alternatives: switching to UP code [65541.848316] CPU1 is down [65541.848409] Extended CMOS year: 2000 [65541.848409] Back to C! [65541.848409] Extended CMOS year: 2000 [65541.848409] Enabling non-boot CPUs ... [65541.848409] SMP alternatives: switching to SMP code [65541.973387] Booting processor 1 APIC 0x1 ip 0x6000 [65541.840152] Initializing CPU#1 [65541.840152] Calibrating delay using timer specific routine.. 4522.38 Bog= oMIPS (lpj=3D9044779) [65541.840152] CPU: L1 I cache: 32K, L1 D cache: 32K [65541.840152] CPU: L2 cache: 3072K [65541.840152] CPU: Physical Processor ID: 0 [65541.840152] CPU: Processor Core ID: 1 [65542.064488] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz steppi= ng 06 [65542.065011] Switched to high resolution mode on CPU 1 [65542.076304] CPU1 is up [65542.076305] ACPI: Waking up from system sleep state S3 [65542.124445] ACPI: EC: non-query interrupt received, switching to interru= pt mode [65542.129115] thinkpad_acpi: unhandled HKEY event 0x6030 [65542.199762] ACPI: \_SB_.GDCK - undocking [65542.224677] ACPI: \_SB_.PCI0.SATA.PRT1 - docking [65542.224840] ACPI: Unable to dock! [65542.234395] pci 0000:00:02.0: restoring config space at offset 0x1 (was = 0x900007, writing 0x900403) [65542.238743] pci 0000:00:02.1: restoring config space at offset 0x1 (was = 0x900000, writing 0x900007) [65542.238755] pci 0000:00:03.0: restoring config space at offset 0xf (was = 0x100, writing 0x10b) [65542.238767] pci 0000:00:03.0: restoring config space at offset 0x1 (was = 0x100006, writing 0x180006) [65542.252291] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ= 20 [65542.252297] e1000e 0000:00:19.0: setting latency timer to 64 [65542.252302] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [65542.252306] e1000e 0000:00:19.0: PME# disabled [65542.252309] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [65542.252313] e1000e 0000:00:19.0: PME# disabled [65542.252346] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [65542.308784] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [65542.308790] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> I= RQ 20 [65542.308795] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [65542.308849] usb usb1: root hub lost power or was reset [65542.308869] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> I= RQ 21 [65542.308873] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [65542.308926] usb usb2: root hub lost power or was reset [65542.309749] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [65542.309754] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> I= RQ 22 [65542.309759] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [65542.309812] usb usb3: root hub lost power or was reset [65542.310554] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [65542.310562] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> I= RQ 23 [65542.310567] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [65542.324094] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1= (was 0x100106, writing 0x100102) [65542.324117] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> = IRQ 17 [65542.324123] HDA Intel 0000:00:1b.0: setting latency timer to 64 [65542.324169] pcieport-driver 0000:00:1c.0: restoring config space at offs= et 0x1 (was 0x100107, writing 0x100507) [65542.324204] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [65542.324236] pcieport-driver 0000:00:1c.1: restoring config space at offs= et 0x1 (was 0x100107, writing 0x100507) [65542.324270] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [65542.324303] pcieport-driver 0000:00:1c.3: restoring config space at offs= et 0x1 (was 0x100107, writing 0x100507) [65542.324337] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [65542.324819] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [65542.324824] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> I= RQ 16 [65542.324828] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [65542.324882] usb usb4: root hub lost power or was reset [65542.324901] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> I= RQ 17 [65542.324906] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [65542.324959] usb usb5: root hub lost power or was reset [65542.324977] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> I= RQ 18 [65542.324981] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [65542.325035] usb usb6: root hub lost power or was reset [65542.325707] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [65542.325715] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> I= RQ 19 [65542.325721] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [65542.325781] pci 0000:00:1e.0: restoring config space at offset 0xf (was = 0x40000, writing 0x400ff) [65542.325792] pci 0000:00:1e.0: restoring config space at offset 0x9 (was = 0x10001, writing 0x1fff1) [65542.325797] pci 0000:00:1e.0: restoring config space at offset 0x8 (was = 0x0, writing 0xfff0) [65542.325802] pci 0000:00:1e.0: restoring config space at offset 0x7 (was = 0x22800000, writing 0x228000f0) [65542.325813] pci 0000:00:1e.0: restoring config space at offset 0x1 (was = 0x100000, writing 0x100107) [65542.325826] pci 0000:00:1e.0: setting latency timer to 64 [65542.340095] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was= 0x2b00007, writing 0x2b00407) [65542.340161] ahci 0000:00:1f.2: setting latency timer to 64 [65542.340236] ata2.00: disabled [65542.356274] vendor=3D8086 device=3D2942 [65542.356283] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [65542.356468] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X [65542.376156] sd 0:0:0:0: [sda] Starting disk [65542.392692] Registered led device: iwl-phy1:radio [65542.392736] Registered led device: iwl-phy1:assoc [65542.392778] Registered led device: iwl-phy1:RX [65542.392819] Registered led device: iwl-phy1:TX [65542.661289] ata2: SATA link down (SStatus 0 SControl 300) [65544.229272] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [65544.300655] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [65544.300662] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [65544.300797] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [65544.300803] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [65544.311615] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [65544.311622] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [65544.311731] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [65544.311738] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [65544.312734] ata1.00: configured for UDMA/100 [65544.314566] ata1.00: configured for UDMA/100 [65544.328278] ata1: EH complete [65544.328370] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 = GB/232 GiB) [65544.328402] sd 0:0:0:0: [sda] Write Protect is off [65544.328407] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [65544.328452] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [65544.328504] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 = GB/232 GiB) [65544.328531] sd 0:0:0:0: [sda] Write Protect is off [65544.328535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [65544.328580] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [65545.720316] usb 7-6: reset high speed USB device using ehci_hcd and addr= ess 4 [65545.968318] usb 2-1: reset full speed USB device using uhci_hcd and addr= ess 3 [65546.120765] pci 0000:00:02.0: power state changed by ACPI to D0 [65546.120955] pci 0000:00:02.0: power state changed by ACPI to D0 [65546.120967] pci 0000:00:02.0: setting latency timer to 64 [65546.232288] usb 2-2: reset full speed USB device using uhci_hcd and addr= ess 5 [65546.385627] pm_op(): usb_dev_resume+0x0/0x5 [usbcore] returns -19 [65546.385634] PM: Device 7-5 failed to resume: error -19 [65546.385671] pm_op(): usb_dev_resume+0x0/0x5 [usbcore] returns -19 [65546.385675] PM: Device 7-5.4 failed to resume: error -19 [65546.403084] Restarting tasks ... <6>usb 7-5: USB disconnect, address 11 [65546.403422] usb 7-5.4: USB disconnect, address 12 [65546.403940] usblp0: removed [65546.439663] done. [66165.586797] PM: Syncing filesystems ... done. [66166.898139] Freezing user space processes ... (elapsed 0.01 seconds) don= e. [66166.917241] Freezing remaining freezable tasks ... (elapsed 0.00 seconds= ) done. [66166.922344] Suspending console(s) (use no_console_suspend to debug) [66166.924394] btusb_intr_complete: hci0 urb ffff8800165f6180 failed to res= ubmit (2) [66167.188438] pci 0000:00:02.0: power state changed by ACPI to D3 [66167.864647] sd 0:0:0:0: [sda] Synchronizing SCSI cache [66167.865279] sd 0:0:0:0: [sda] Stopping disk [66170.312458] ehci_hcd 0000:00:1d.7: PCI INT D disabled [66170.329442] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [66170.329522] uhci_hcd 0000:00:1d.2: PCI INT C disabled [66170.329586] uhci_hcd 0000:00:1d.1: PCI INT B disabled [66170.329649] uhci_hcd 0000:00:1d.0: PCI INT A disabled [66170.329855] HDA Intel 0000:00:1b.0: PCI INT B disabled [66170.344259] ehci_hcd 0000:00:1a.7: PCI INT D disabled [66170.361480] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [66170.361558] uhci_hcd 0000:00:1a.2: PCI INT C disabled [66170.361622] uhci_hcd 0000:00:1a.1: PCI INT B disabled [66170.361685] uhci_hcd 0000:00:1a.0: PCI INT A disabled [66170.419151] e1000e 0000:00:19.0: PME# enabled [66170.419183] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [66170.419191] e1000e 0000:00:19.0: PME# enabled [66170.419195] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [66170.419206] e1000e 0000:00:19.0: PCI INT A disabled [66170.437915] ACPI: Preparing to enter system sleep state S3 [66170.456987] Disabling non-boot CPUs ... [66170.560023] CPU 1 is now offline [66170.560027] SMP alternatives: switching to UP code [66170.748183] CPU1 is down [66170.748278] Extended CMOS year: 2000 [66170.748278] Back to C! [66170.748278] Extended CMOS year: 2000 [66170.748278] Enabling non-boot CPUs ... [66170.748278] SMP alternatives: switching to SMP code [66170.872893] Booting processor 1 APIC 0x1 ip 0x6000 [66170.735904] Initializing CPU#1 [66170.735904] Calibrating delay using timer specific routine.. 4522.04 Bog= oMIPS (lpj=3D9044099) [66170.735904] CPU: L1 I cache: 32K, L1 D cache: 32K [66170.735904] CPU: L2 cache: 3072K [66170.735904] CPU: Physical Processor ID: 0 [66170.735904] CPU: Processor Core ID: 1 [66170.960471] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz steppi= ng 06 [66170.961011] Switched to high resolution mode on CPU 1 [66170.972302] CPU1 is up [66170.972304] ACPI: Waking up from system sleep state S3 [66171.009731] ACPI: EC: non-query interrupt received, switching to interru= pt mode [66171.061037] pci 0000:00:02.0: restoring config space at offset 0x1 (was = 0x900007, writing 0x900403) [66171.064932] pci 0000:00:02.1: restoring config space at offset 0x1 (was = 0x900000, writing 0x900007) [66171.064944] pci 0000:00:03.0: restoring config space at offset 0xf (was = 0x100, writing 0x10b) [66171.064956] pci 0000:00:03.0: restoring config space at offset 0x1 (was = 0x100006, writing 0x180006) [66171.080089] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ= 20 [66171.080094] e1000e 0000:00:19.0: setting latency timer to 64 [66171.080099] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [66171.080103] e1000e 0000:00:19.0: PME# disabled [66171.080105] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [66171.080109] e1000e 0000:00:19.0: PME# disabled [66171.080142] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [66171.137262] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [66171.137277] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> I= RQ 20 [66171.137286] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [66171.137363] usb usb1: root hub lost power or was reset [66171.137391] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> I= RQ 21 [66171.137399] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [66171.137472] usb usb2: root hub lost power or was reset [66171.138160] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [66171.138169] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> I= RQ 22 [66171.138177] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [66171.138251] usb usb3: root hub lost power or was reset [66171.139157] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [66171.139169] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> I= RQ 23 [66171.139177] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [66171.152317] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1= (was 0x100106, writing 0x100102) [66171.152352] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> = IRQ 17 [66171.152363] HDA Intel 0000:00:1b.0: setting latency timer to 64 [66171.152434] pcieport-driver 0000:00:1c.0: restoring config space at offs= et 0x1 (was 0x100107, writing 0x100507) [66171.152485] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [66171.152535] pcieport-driver 0000:00:1c.1: restoring config space at offs= et 0x1 (was 0x100107, writing 0x100507) [66171.152586] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [66171.152635] pcieport-driver 0000:00:1c.3: restoring config space at offs= et 0x1 (was 0x100107, writing 0x100507) [66171.152685] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [66171.153649] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [66171.153659] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> I= RQ 16 [66171.153667] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [66171.153741] usb usb4: root hub lost power or was reset [66171.153767] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> I= RQ 17 [66171.153775] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [66171.153848] usb usb5: root hub lost power or was reset [66171.153872] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> I= RQ 18 [66171.153879] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [66171.153952] usb usb6: root hub lost power or was reset [66171.154650] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [66171.154661] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> I= RQ 19 [66171.154669] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [66171.154753] pci 0000:00:1e.0: restoring config space at offset 0xf (was = 0x40000, writing 0x400ff) [66171.154771] pci 0000:00:1e.0: restoring config space at offset 0x9 (was = 0x10001, writing 0x1fff1) [66171.154779] pci 0000:00:1e.0: restoring config space at offset 0x8 (was = 0x0, writing 0xfff0) [66171.154788] pci 0000:00:1e.0: restoring config space at offset 0x7 (was = 0x22800000, writing 0x228000f0) [66171.154805] pci 0000:00:1e.0: restoring config space at offset 0x1 (was = 0x100000, writing 0x100107) [66171.154827] pci 0000:00:1e.0: setting latency timer to 64 [66171.168089] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was= 0x2b00007, writing 0x2b00407) [66171.168142] ahci 0000:00:1f.2: setting latency timer to 64 [66171.184273] vendor=3D8086 device=3D2942 [66171.184282] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [66171.184467] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X [66171.204190] sd 0:0:0:0: [sda] Starting disk [66171.220669] Registered led device: iwl-phy1:radio [66171.220713] Registered led device: iwl-phy1:assoc [66171.220756] Registered led device: iwl-phy1:RX [66171.220797] Registered led device: iwl-phy1:TX [66171.492275] ata2: SATA link down (SStatus 0 SControl 300) [66172.833275] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [66172.889638] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [66172.889646] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [66172.889766] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [66172.889772] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [66172.900716] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [66172.900723] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [66172.900827] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [66172.900832] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [66172.901656] ata1.00: configured for UDMA/100 [66172.903758] ata1.00: configured for UDMA/100 [66172.917276] ata1: EH complete [66172.917365] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 = GB/232 GiB) [66172.917398] sd 0:0:0:0: [sda] Write Protect is off [66172.917402] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [66172.917448] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [66172.917500] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 = GB/232 GiB) [66172.917528] sd 0:0:0:0: [sda] Write Protect is off [66172.917532] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [66172.917576] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [66174.308316] usb 7-6: reset high speed USB device using ehci_hcd and addr= ess 4 [66174.556282] usb 2-1: reset full speed USB device using uhci_hcd and addr= ess 3 [66174.708768] pci 0000:00:02.0: power state changed by ACPI to D0 [66174.708958] pci 0000:00:02.0: power state changed by ACPI to D0 [66174.708970] pci 0000:00:02.0: setting latency timer to 64 [66174.820278] usb 2-2: reset full speed USB device using uhci_hcd and addr= ess 5 [66174.989915] Restarting tasks ... done. [66176.050070] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64. [66176.356927] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [66176.377059] input: TPPS/2 IBM TrackPoint as /class/input/input9 [66736.533760] PM: Syncing filesystems ... done. [66737.214084] Freezing user space processes ... (elapsed 0.02 seconds) don= e. [66737.237242] Freezing remaining freezable tasks ... (elapsed 0.00 seconds= ) done. [66737.240522] Suspending console(s) (use no_console_suspend to debug) [66737.243373] btusb_intr_complete: hci0 urb ffff8800179fc180 failed to res= ubmit (2) [66737.508438] pci 0000:00:02.0: power state changed by ACPI to D3 [66738.184493] sd 0:0:0:0: [sda] Synchronizing SCSI cache [66738.185056] sd 0:0:0:0: [sda] Stopping disk [66740.584450] ehci_hcd 0000:00:1d.7: PCI INT D disabled [66740.601376] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [66740.601456] uhci_hcd 0000:00:1d.2: PCI INT C disabled [66740.601519] uhci_hcd 0000:00:1d.1: PCI INT B disabled [66740.601582] uhci_hcd 0000:00:1d.0: PCI INT A disabled [66740.601788] HDA Intel 0000:00:1b.0: PCI INT B disabled [66740.616255] ehci_hcd 0000:00:1a.7: PCI INT D disabled [66740.633451] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [66740.633530] uhci_hcd 0000:00:1a.2: PCI INT C disabled [66740.633594] uhci_hcd 0000:00:1a.1: PCI INT B disabled [66740.633658] uhci_hcd 0000:00:1a.0: PCI INT A disabled [66740.691103] e1000e 0000:00:19.0: PME# enabled [66740.691136] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [66740.691144] e1000e 0000:00:19.0: PME# enabled [66740.691148] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [66740.691159] e1000e 0000:00:19.0: PCI INT A disabled [66740.709628] ACPI: Preparing to enter system sleep state S3 [66740.727907] Disabling non-boot CPUs ... [66740.730031] CPU 1 is now offline [66740.730035] SMP alternatives: switching to UP code [66740.904336] CPU1 is down [66740.904429] Extended CMOS year: 2000 [66740.904429] Back to C! [66740.904429] Extended CMOS year: 2000 [66740.904429] Enabling non-boot CPUs ... [66740.904429] SMP alternatives: switching to SMP code [66741.029228] Booting processor 1 APIC 0x1 ip 0x6000 [66740.899814] Initializing CPU#1 [66740.899814] Calibrating delay using timer specific routine.. 4522.04 Bog= oMIPS (lpj=3D9044083) [66740.899814] CPU: L1 I cache: 32K, L1 D cache: 32K [66740.899814] CPU: L2 cache: 3072K [66740.899814] CPU: Physical Processor ID: 0 [66740.899814] CPU: Processor Core ID: 1 [66741.120471] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz steppi= ng 06 [66741.121011] Switched to high resolution mode on CPU 1 [66741.132302] CPU1 is up [66741.132304] ACPI: Waking up from system sleep state S3 [66741.171018] ACPI: EC: non-query interrupt received, switching to interru= pt mode [66741.222873] pci 0000:00:02.0: restoring config space at offset 0x1 (was = 0x900007, writing 0x900403) [66741.226778] pci 0000:00:02.1: restoring config space at offset 0x1 (was = 0x900000, writing 0x900007) [66741.226791] pci 0000:00:03.0: restoring config space at offset 0xf (was = 0x100, writing 0x10b) [66741.226803] pci 0000:00:03.0: restoring config space at offset 0x1 (was = 0x100006, writing 0x180006) [66741.240290] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ= 20 [66741.240296] e1000e 0000:00:19.0: setting latency timer to 64 [66741.240301] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [66741.240306] e1000e 0000:00:19.0: PME# disabled [66741.240308] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [66741.240312] e1000e 0000:00:19.0: PME# disabled [66741.240345] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [66741.297714] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [66741.297730] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> I= RQ 20 [66741.297739] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [66741.297817] usb usb1: root hub lost power or was reset [66741.297847] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> I= RQ 21 [66741.297854] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [66741.297927] usb usb2: root hub lost power or was reset [66741.298709] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [66741.298718] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> I= RQ 22 [66741.298726] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [66741.298800] usb usb3: root hub lost power or was reset [66741.299624] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [66741.299635] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> I= RQ 23 [66741.299643] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [66741.312173] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1= (was 0x100106, writing 0x100102) [66741.312202] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> = IRQ 17 [66741.312212] HDA Intel 0000:00:1b.0: setting latency timer to 64 [66741.312279] pcieport-driver 0000:00:1c.0: restoring config space at offs= et 0x1 (was 0x100107, writing 0x100507) [66741.312331] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [66741.312381] pcieport-driver 0000:00:1c.1: restoring config space at offs= et 0x1 (was 0x100107, writing 0x100507) [66741.312431] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [66741.312480] pcieport-driver 0000:00:1c.3: restoring config space at offs= et 0x1 (was 0x100107, writing 0x100507) [66741.312530] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [66741.313501] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [66741.313510] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> I= RQ 16 [66741.313518] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [66741.313592] usb usb4: root hub lost power or was reset [66741.313617] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> I= RQ 17 [66741.313625] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [66741.313698] usb usb5: root hub lost power or was reset [66741.313722] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> I= RQ 18 [66741.313730] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [66741.313803] usb usb6: root hub lost power or was reset [66741.314602] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [66741.314613] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> I= RQ 19 [66741.314622] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [66741.314706] pci 0000:00:1e.0: restoring config space at offset 0xf (was = 0x40000, writing 0x400ff) [66741.314723] pci 0000:00:1e.0: restoring config space at offset 0x9 (was = 0x10001, writing 0x1fff1) [66741.314732] pci 0000:00:1e.0: restoring config space at offset 0x8 (was = 0x0, writing 0xfff0) [66741.314740] pci 0000:00:1e.0: restoring config space at offset 0x7 (was = 0x22800000, writing 0x228000f0) [66741.314758] pci 0000:00:1e.0: restoring config space at offset 0x1 (was = 0x100000, writing 0x100107) [66741.314779] pci 0000:00:1e.0: setting latency timer to 64 [66741.328088] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was= 0x2b00007, writing 0x2b00407) [66741.328142] ahci 0000:00:1f.2: setting latency timer to 64 [66741.344118] vendor=3D8086 device=3D2942 [66741.344123] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [66741.344307] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X [66741.364031] sd 0:0:0:0: [sda] Starting disk [66741.380815] Registered led device: iwl-phy1:radio [66741.380860] Registered led device: iwl-phy1:assoc [66741.380904] Registered led device: iwl-phy1:RX [66741.380947] Registered led device: iwl-phy1:TX [66741.649282] ata2: SATA link down (SStatus 0 SControl 300) [66743.273280] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [66743.325955] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [66743.325963] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [66743.326108] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [66743.326115] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [66743.336900] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [66743.336907] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [66743.337013] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [66743.337019] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [66743.338044] ata1.00: configured for UDMA/100 [66743.340367] ata1.00: configured for UDMA/100 [66743.356126] ata1: EH complete [66743.356216] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 = GB/232 GiB) [66743.356248] sd 0:0:0:0: [sda] Write Protect is off [66743.356253] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [66743.356298] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [66743.356349] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 = GB/232 GiB) [66743.356376] sd 0:0:0:0: [sda] Write Protect is off [66743.356380] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [66743.356425] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [66744.732287] usb 7-6: reset high speed USB device using ehci_hcd and addr= ess 4 [66744.980316] usb 2-1: reset full speed USB device using uhci_hcd and addr= ess 3 [66745.131798] pci 0000:00:02.0: power state changed by ACPI to D0 [66745.131988] pci 0000:00:02.0: power state changed by ACPI to D0 [66745.132000] pci 0000:00:02.0: setting latency timer to 64 [66745.244317] usb 2-2: reset full speed USB device using uhci_hcd and addr= ess 5 [66745.412876] Restarting tasks ... done. [66746.491041] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64. [66746.798380] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [66746.817598] input: TPPS/2 IBM TrackPoint as /class/input/input10 [68335.237787] PM: Syncing filesystems ... done. [68336.034302] Freezing user space processes ... (elapsed 0.01 seconds) don= e. [68336.053181] Freezing remaining freezable tasks ... (elapsed 0.00 seconds= ) done. [68336.057257] Suspending console(s) (use no_console_suspend to debug) [68336.059536] btusb_intr_complete: hci0 urb ffff880065c7e480 failed to res= ubmit (2) [68336.324438] pci 0000:00:02.0: power state changed by ACPI to D3 [68336.996457] sd 0:0:0:0: [sda] Synchronizing SCSI cache [68336.996955] sd 0:0:0:0: [sda] Stopping disk [68339.384271] ehci_hcd 0000:00:1d.7: PCI INT D disabled [68339.402071] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [68339.402150] uhci_hcd 0000:00:1d.2: PCI INT C disabled [68339.402214] uhci_hcd 0000:00:1d.1: PCI INT B disabled [68339.402277] uhci_hcd 0000:00:1d.0: PCI INT A disabled [68339.402483] HDA Intel 0000:00:1b.0: PCI INT B disabled [68339.416208] ehci_hcd 0000:00:1a.7: PCI INT D disabled [68339.432962] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [68339.433034] uhci_hcd 0000:00:1a.2: PCI INT C disabled [68339.433098] uhci_hcd 0000:00:1a.1: PCI INT B disabled [68339.433160] uhci_hcd 0000:00:1a.0: PCI INT A disabled [68339.491101] e1000e 0000:00:19.0: PME# enabled [68339.491133] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [68339.491141] e1000e 0000:00:19.0: PME# enabled [68339.491145] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [68339.491156] e1000e 0000:00:19.0: PCI INT A disabled [68339.510331] ACPI: Preparing to enter system sleep state S3 [68339.530635] Disabling non-boot CPUs ... [68339.532750] CPU 1 is now offline [68339.532753] SMP alternatives: switching to UP code [68339.704335] CPU1 is down [68339.704429] Extended CMOS year: 2000 [68339.704429] Back to C! [68339.704429] Extended CMOS year: 2000 [68339.704429] Enabling non-boot CPUs ... [68339.704429] SMP alternatives: switching to SMP code [68339.829550] Booting processor 1 APIC 0x1 ip 0x6000 [68339.701654] Initializing CPU#1 [68339.701654] Calibrating delay using timer specific routine.. 4522.01 Bog= oMIPS (lpj=3D9044037) [68339.701654] CPU: L1 I cache: 32K, L1 D cache: 32K [68339.701654] CPU: L2 cache: 3072K [68339.701654] CPU: Physical Processor ID: 0 [68339.701654] CPU: Processor Core ID: 1 [68339.920475] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz steppi= ng 06 [68339.921011] Switched to high resolution mode on CPU 1 [68339.932304] CPU1 is up [68339.932306] ACPI: Waking up from system sleep state S3 [68339.971004] ACPI: EC: non-query interrupt received, switching to interru= pt mode [68340.022346] pci 0000:00:02.0: restoring config space at offset 0x1 (was = 0x900007, writing 0x900403) [68340.025772] pci 0000:00:02.1: restoring config space at offset 0x1 (was = 0x900000, writing 0x900007) [68340.025785] pci 0000:00:03.0: restoring config space at offset 0xf (was = 0x100, writing 0x10b) [68340.025797] pci 0000:00:03.0: restoring config space at offset 0x1 (was = 0x100006, writing 0x180006) [68340.040080] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ= 20 [68340.040085] e1000e 0000:00:19.0: setting latency timer to 64 [68340.040090] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [68340.040095] e1000e 0000:00:19.0: PME# disabled [68340.040097] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [68340.040100] e1000e 0000:00:19.0: PME# disabled [68340.040133] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [68340.097225] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [68340.097234] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> I= RQ 20 [68340.097243] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [68340.097318] usb usb1: root hub lost power or was reset [68340.097345] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> I= RQ 21 [68340.097353] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [68340.097426] usb usb2: root hub lost power or was reset [68340.098449] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [68340.098457] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> I= RQ 22 [68340.098465] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [68340.098539] usb usb3: root hub lost power or was reset [68340.099403] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [68340.099414] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> I= RQ 23 [68340.099422] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [68340.112201] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1= (was 0x100106, writing 0x100102) [68340.112236] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> = IRQ 17 [68340.112246] HDA Intel 0000:00:1b.0: setting latency timer to 64 [68340.112317] pcieport-driver 0000:00:1c.0: restoring config space at offs= et 0x1 (was 0x100107, writing 0x100507) [68340.112368] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [68340.112418] pcieport-driver 0000:00:1c.1: restoring config space at offs= et 0x1 (was 0x100107, writing 0x100507) [68340.112469] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [68340.112518] pcieport-driver 0000:00:1c.3: restoring config space at offs= et 0x1 (was 0x100107, writing 0x100507) [68340.112568] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [68340.113294] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [68340.113303] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> I= RQ 16 [68340.113311] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [68340.113386] usb usb4: root hub lost power or was reset [68340.113411] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> I= RQ 17 [68340.113419] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [68340.113493] usb usb5: root hub lost power or was reset [68340.113517] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> I= RQ 18 [68340.113524] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [68340.113597] usb usb6: root hub lost power or was reset [68340.114520] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [68340.114531] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> I= RQ 19 [68340.114540] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [68340.114624] pci 0000:00:1e.0: restoring config space at offset 0xf (was = 0x40000, writing 0x400ff) [68340.114641] pci 0000:00:1e.0: restoring config space at offset 0x9 (was = 0x10001, writing 0x1fff1) [68340.114650] pci 0000:00:1e.0: restoring config space at offset 0x8 (was = 0x0, writing 0xfff0) [68340.114658] pci 0000:00:1e.0: restoring config space at offset 0x7 (was = 0x22800000, writing 0x228000f0) [68340.114676] pci 0000:00:1e.0: restoring config space at offset 0x1 (was = 0x100000, writing 0x100107) [68340.114697] pci 0000:00:1e.0: setting latency timer to 64 [68340.128158] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was= 0x2b00007, writing 0x2b00407) [68340.128211] ahci 0000:00:1f.2: setting latency timer to 64 [68340.144275] vendor=3D8086 device=3D2942 [68340.144283] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [68340.144470] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X [68340.164187] sd 0:0:0:0: [sda] Starting disk [68340.180662] Registered led device: iwl-phy1:radio [68340.180707] Registered led device: iwl-phy1:assoc [68340.180750] Registered led device: iwl-phy1:RX [68340.180793] Registered led device: iwl-phy1:TX [68340.449274] ata2: SATA link down (SStatus 0 SControl 300) [68342.129279] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [68342.215856] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [68342.215864] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [68342.216197] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [68342.216204] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [68342.226940] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [68342.226947] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [68342.227265] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [68342.227272] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [68342.228094] ata1.00: configured for UDMA/100 [68342.229986] ata1.00: configured for UDMA/100 [68342.244268] ata1: EH complete [68342.244361] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 = GB/232 GiB) [68342.244394] sd 0:0:0:0: [sda] Write Protect is off [68342.244398] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [68342.244444] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [68342.244496] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 = GB/232 GiB) [68342.244523] sd 0:0:0:0: [sda] Write Protect is off [68342.244527] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [68342.244572] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [68343.624317] usb 7-6: reset high speed USB device using ehci_hcd and addr= ess 4 [68343.872287] usb 2-1: reset full speed USB device using uhci_hcd and addr= ess 3 [68344.023792] pci 0000:00:02.0: power state changed by ACPI to D0 [68344.023980] pci 0000:00:02.0: power state changed by ACPI to D0 [68344.023993] pci 0000:00:02.0: setting latency timer to 64 [68344.136320] usb 2-2: reset full speed USB device using uhci_hcd and addr= ess 5 [68344.305916] Restarting tasks ... done. [68345.361394] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64. [68345.663812] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [68345.682196] input: TPPS/2 IBM TrackPoint as /class/input/input11 [68489.268054] usb 7-1: new high speed USB device using ehci_hcd and addres= s 13 [68489.414122] usb 7-1: configuration #1 chosen from 1 choice [68489.740123] usbcore: registered new interface driver libusual [68489.808886] Initializing USB Mass Storage driver... [68489.815721] usb-storage: probe of 7-1:1.0 failed with error -5 [68489.815779] usbcore: registered new interface driver usb-storage [68489.815785] USB Mass Storage support registered. [68489.818423] usb 7-1: USB disconnect, address 13 [68490.076140] usb 7-1: new high speed USB device using ehci_hcd and addres= s 14 [68490.221747] usb 7-1: configuration #1 chosen from 1 choice [68490.276105] scsi5 : SCSI emulation for USB Mass Storage devices [68490.276549] usb-storage: device found at 14 [68490.276553] usb-storage: waiting for device to settle before scanning [68490.455842] usbcore: registered new interface driver usbserial [68490.455845] usbserial: USB Serial Driver core [68490.458869] USB Serial support registered for Sierra USB modem [68490.458897] sierra 7-1:1.0: Sierra USB modem converter detected [68490.459373] usb 7-1: Sierra USB modem converter now attached to ttyUSB0 [68490.459383] sierra 7-1:1.1: Sierra USB modem converter detected [68490.460229] usb 7-1: Sierra USB modem converter now attached to ttyUSB1 [68490.460242] sierra 7-1:1.2: Sierra USB modem converter detected [68490.461046] usb 7-1: Sierra USB modem converter now attached to ttyUSB2 [68490.461056] sierra 7-1:1.3: Sierra USB modem converter detected [68490.462044] usb 7-1: Sierra USB modem converter now attached to ttyUSB3 [68490.462054] sierra 7-1:1.4: Sierra USB modem converter detected [68490.463042] usb 7-1: Sierra USB modem converter now attached to ttyUSB4 [68490.463051] sierra 7-1:1.5: Sierra USB modem converter detected [68490.464311] usb 7-1: Sierra USB modem converter now attached to ttyUSB5 [68490.464321] sierra 7-1:1.6: Sierra USB modem converter detected [68490.465050] usb 7-1: Sierra USB modem converter now attached to ttyUSB6 [68490.465063] usbcore: registered new interface driver sierra [68490.465065] sierra: v.1.3.2:USB Driver for Sierra Wireless USB modems [68495.274800] isa bounce pool size: 16 pages [68495.276621] scsi 5:0:0:0: Direct-Access SWI SD Card 2.= 31 PQ: 0 ANSI: 2 [68495.282335] sd 5:0:0:0: [sdb] Attached SCSI removable disk [68495.282550] sd 5:0:0:0: Attached scsi generic sg1 type 0 [68495.282998] usb-storage: device scan complete [68504.418123] PPP generic driver version 2.4.2 [68504.666656] PPP BSD Compression module registered [68504.801685] PPP Deflate Compression module registered [68595.368293] device ppp0 entered promiscuous mode [68604.327010] vendor=3D8086 device=3D2942 [68604.327022] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [68604.327210] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X [68604.356406] Registered led device: iwl-phy1:radio [68604.356456] Registered led device: iwl-phy1:assoc [68604.356502] Registered led device: iwl-phy1:RX [68604.356546] Registered led device: iwl-phy1:TX [68604.370286] ADDRCONF(NETDEV_UP): wlan0: link is not ready [69134.199241] device ppp0 left promiscuous mode [69186.618203] general protection fault: 0000 [#1] PREEMPT SMP=20 [69186.618216] last sysfs file: /sys/class/power_supply/BAT0/energy_full [69186.618220] CPU 0=20 [69186.618224] Modules linked in: ppp_deflate zlib_deflate zlib_inflate bsd= _comp ppp_async crc_ccitt ppp_generic slhc sierra usbserial usb_storage lib= usual nfs lockd nfs_acl sunrpc iwlagn tun sg usblp sr_mod cdrom vfat fat i9= 15 drm rfcomm l2cap uinput autofs4 ipv6 cpufreq_powersave sha256_generic an= si_cprng krng chainiv rng aes_x86_64 aes_generic cbc dm_crypt dm_mod md_mod= loop btusb bluetooth arc4 ecb cryptomgr aead crypto_blkcipher crypto_hash = snd_hda_intel snd_pcm snd_page_alloc snd_hwdep snd_seq snd_timer snd_seq_de= vice i2c_i801 rtc_cmos rtc_core snd rtc_lib iwlcore i2c_core pcspkr soundco= re mac80211 cfg80211 ehci_hcd video output uhci_hcd wmi usbcore e1000e inte= l_agp thinkpad_acpi rfkill hwmon backlight led_class nvram [last unloaded: = iwlagn] [69186.618352] Pid: 2848, comm: kcryptd Not tainted 2.6.28-rc6-next-2008112= 5-denkbrett #15 [69186.618357] RIP: 0010:[] [] crypto_= xor+0x7/0x48 [69186.618372] RSP: 0018:ffff880079879cc8 EFLAGS: 00010212 [69186.618377] RAX: 00000000fffffff0 RBX: b6e3880000000010 RCX: 00000000000= 00000 [69186.618382] RDX: 0000000000000010 RSI: b6e3880000000000 RDI: ffff88007a3= da4e0 [69186.618387] RBP: 0000000000000010 R08: 0000000000000010 R09: 00000000000= 00000 [69186.618392] R10: 0000000000000000 R11: ffff88007a3da4e0 R12: 00000000000= 00010 [69186.618397] R13: ffff88000c8c9000 R14: ffff88007a3da4e0 R15: 00000000000= 001f0 [69186.618403] FS: 0000000000000000(0000) GS:ffffffff805f51c0(0000) knlGS:= 0000000000000000 [69186.618408] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [69186.618413] CR2: 00007f56a00ef000 CR3: 0000000053dc9000 CR4: 00000000000= 006e0 [69186.618418] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 00000000000= 00000 [69186.618423] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 00000000000= 00400 [69186.618429] Process kcryptd (pid: 2848, threadinfo ffff880079878000, tas= k ffff88007c2f23a0) [69186.618433] Stack: [69186.618436] ffffffffa027226a ffffffff805e1e00 ffff880079879db0 ffff8800= 7ad33800 [69186.618444] ffff88007b400360 ffffffffa0285705 fffffff000011212 00000000= 00000000 [69186.618453] b6e3880000000000 ffffe200002bebf8 ffff88000c8c9000 ffff8800= 7a3da4a0 [69186.618462] Call Trace: [69186.618468] [] ? crypto_cbc_encrypt+0xfa/0x15a [cbc] [69186.618481] [] ? aes_encrypt+0x0/0x7 [aes_x86_64] [69186.618494] [] ? async_encrypt+0x35/0x3a [crypto_blkc= ipher] [69186.618509] [] ? crypt_convert+0x1d2/0x253 [dm_crypt] [69186.618522] [] ? kcryptd_crypt+0x3e6/0x407 [dm_crypt] [69186.618533] [] ? kcryptd_crypt+0x0/0x407 [dm_crypt] [69186.618543] [] ? run_workqueue+0x87/0x122 [69186.618552] [] ? worker_thread+0xd8/0xe7 [69186.618560] [] ? autoremove_wake_function+0x0/0x2e [69186.618569] [] ? worker_thread+0x0/0xe7 [69186.618575] [] ? worker_thread+0x0/0xe7 [69186.618582] [] ? kthread+0x47/0x73 [69186.618589] [] ? child_rip+0xa/0x21 [69186.618597] [] ? kthread+0x0/0x73 [69186.618604] [] ? child_rip+0x0/0x21 [69186.618611] Code: 08 48 89 51 08 48 89 0a 48 b9 00 01 10 00 00 00 ad de = 48 ba 00 02 20 00 00 00 ad de 48 89 08 48 89 50 08 c3 41 89 d0 31 c9 eb 0e = <8b> 04 0e 41 83 e8 04 31 04 0f 48 83 c1 04 41 83 f8 03 77 ec 41=20 [69186.618678] RIP [] crypto_xor+0x7/0x48 [69186.618686] RSP [69186.618723] ---[ end trace 728c95da3be59caf ]--- [69186.618730] note: kcryptd[2848] exited with preempt_count 2 Linux ikn 2.6.28-rc6-next-20081125-denkbrett #15 SMP PREEMPT Tue Nov 25 13:= 41:17 CET 2008 x86_64 GNU/Linux 07:12:23 up 1 day, 22:28, 1 user, load average: 2.21, 0.82, 0.58 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 10312 616 ? Ss Nov26 0:00 init [2] = =20 root 2 0.0 0.0 0 0 ? S< Nov26 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S< Nov26 0:00 [migration= /0] root 4 0.0 0.0 0 0 ? S< Nov26 0:00 [ksoftirqd= /0] root 7 0.0 0.0 0 0 ? S< Nov26 0:01 [events/0] root 9 0.0 0.0 0 0 ? S< Nov26 0:00 [khelper] root 13 0.0 0.0 0 0 ? S< Nov26 0:00 [kstop/0] root 109 0.0 0.0 0 0 ? S< Nov26 0:00 [kblockd/0] root 111 0.0 0.0 0 0 ? S< Nov26 0:00 [kacpid] root 112 0.0 0.0 0 0 ? S< Nov26 0:00 [kacpi_not= ify] root 193 0.0 0.0 0 0 ? S< Nov26 0:00 [ata/0] root 195 0.0 0.0 0 0 ? S< Nov26 0:00 [ata_aux] root 197 0.0 0.0 0 0 ? S< Nov26 0:00 [kseriod] root 226 0.0 0.0 0 0 ? S< Nov26 0:00 [kondemand= /0] root 261 0.0 0.0 0 0 ? S Nov26 0:00 [pdflush] root 262 0.0 0.0 0 0 ? S Nov26 0:01 [pdflush] root 263 0.0 0.0 0 0 ? S< Nov26 0:00 [kswapd0] root 310 0.0 0.0 0 0 ? S< Nov26 0:00 [aio/0] root 322 0.0 0.0 0 0 ? S< Nov26 0:00 [jfsIO] root 323 0.0 0.0 0 0 ? S< Nov26 0:02 [jfsCommit] root 324 0.0 0.0 0 0 ? S< Nov26 0:02 [jfsCommit] root 325 0.0 0.0 0 0 ? S< Nov26 0:00 [jfsSync] nico 392 0.0 0.0 12280 1536 ? S+ 07:00 0:00 /bin/sh /h= ome/user/nico/bin/ressh.sh tee.schottelius.org nico 393 0.0 0.1 46916 3008 ? S+ 07:00 0:00 ssh tee.sc= hottelius.org root 768 0.0 0.0 21448 1208 ? S 07:09 0:00 /usr/sbin/= pppd 57600 modem crtscts defaultroute usehostname -detach user testprofil n= oipdefault call wvdial usepeerdns idle 0 logfd 8 postfix 834 0.0 0.1 38944 2252 ? S 07:09 0:00 qmgr -l -t= fifo -u postfix 835 0.0 0.1 38896 2212 ? S 07:09 0:00 pickup -l = -t fifo -u -c nico 948 0.0 0.0 19380 888 ? D+ 07:11 0:00 ls --color= =3Dauto nico 963 0.2 0.1 32708 3392 ? S+ 07:12 0:00 vi /tmp/ca= lltrace-2.6.28-next-1125 root 984 0.0 0.0 0 0 ? S< Nov26 0:00 [scsi_eh_0] root 986 0.0 0.0 0 0 ? S< Nov26 0:00 [scsi_eh_1] root 988 0.0 0.0 0 0 ? S< Nov26 0:00 [scsi_eh_2] root 990 0.0 0.0 0 0 ? S< Nov26 0:00 [scsi_eh_3] nico 993 0.0 0.0 17656 1100 ? R+ 07:12 0:00 ps auxwww root 1003 0.0 0.0 0 0 ? S< Nov26 0:00 [khpsbpkt] root 1025 0.0 0.0 0 0 ? S< Nov26 0:00 [kpsmoused] root 1028 0.0 0.0 0 0 ? S< Nov26 0:00 [hid_compa= t] root 1140 0.0 0.0 18280 588 ? S nico 30408 0.0 0.2 41360 4056 pts/3 Ss+ Nov27 0:00 zsh root 32431 0.0 0.0 0 0 ? S< 06:56 0:00 [migration= /1] root 32432 0.0 0.0 0 0 ? S< 06:56 0:00 [ksoftirqd= /1] root 32433 0.0 0.0 0 0 ? S< 06:56 0:00 [rpciod/1] root 32434 0.0 0.0 0 0 ? S< 06:56 0:00 [iwlagn/1] root 32435 0.0 0.0 0 0 ? S< 06:56 0:00 [aio/1] root 32436 0.0 0.0 0 0 ? S< 06:56 0:00 [kondemand= /1] root 32437 0.0 0.0 0 0 ? S< 06:56 0:00 [ata/1] root 32438 0.0 0.0 0 0 ? S< 06:56 0:00 [kblockd/1] root 32439 0.0 0.0 0 0 ? S< 06:56 0:00 [kstop/1] root 32440 0.0 0.0 0 0 ? S< 06:56 0:00 [events/1] root 32619 0.0 0.0 0 0 ? S< 06:58 0:00 [scsi_eh_5] root 32620 0.0 0.0 0 0 ? S< 06:58 0:00 [usb-stora= ge] root 32702 0.0 0.0 19880 1148 ? S 06:58 0:00 hald-addon= -storage: polling /dev/sdb (every 2 sec) root 32713 0.0 0.1 39944 3520 ? S+ 06:58 0:00 wvdial -C = /home/user/nico/privat/computer/net/umts/wvdial-swisscom-corporate.conf --NzB8fVQJ5HfG6fxh-- --i0/AhcQY5QxfSsSZ Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAkkvkNMACgkQuL75KpiFGIySUQCdEy+B0THnt7uYmx1WhOtOQTFp NogAoOphTM4sz8cBt3T3DQA7arDyjyyD =I+ZD -----END PGP SIGNATURE----- --i0/AhcQY5QxfSsSZ-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/