Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755627AbYK2OUo (ORCPT ); Sat, 29 Nov 2008 09:20:44 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751219AbYK2OUa (ORCPT ); Sat, 29 Nov 2008 09:20:30 -0500 Received: from smtp-vbr4.xs4all.nl ([194.109.24.24]:4166 "EHLO smtp-vbr4.xs4all.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753460AbYK2OUQ (ORCPT ); Sat, 29 Nov 2008 09:20:16 -0500 From: Hans Verkuil To: Laurent Pinchart Subject: Re: v4l2_device/v4l2_subdev: please review (PATCH 1/3) Date: Sat, 29 Nov 2008 15:19:39 +0100 User-Agent: KMail/1.9.9 Cc: video4linux-list@redhat.com, "Trilok Soni" , "linux-omap@vger.kernel.org" , "davinci-linux-open-source@linux.davincidsp.com" , linux-kernel@vger.kernel.org References: <200811242309.37489.hverkuil@xs4all.nl> <200811251848.09593.hverkuil@xs4all.nl> <200811290034.44340.laurent.pinchart@skynet.be> In-Reply-To: <200811290034.44340.laurent.pinchart@skynet.be> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200811291519.39549.hverkuil@xs4all.nl> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 44389 Lines: 1104 Hi Laurent, Let me start by thanking you for reviewing this! Much appreciated. On Saturday 29 November 2008 00:34:44 Laurent Pinchart wrote: > Hi Hans, > > On Tuesday 25 November 2008, Hans Verkuil wrote: > > As requested, the patches as separate posts for review. > > > > Hans > > > > # HG changeset patch > > # User Hans Verkuil > > # Date 1227560990 -3600 > > # Node ID d9ec70c0b0c55e18813f91218c6da6212ca9b7e6 > > # Parent b63737bf9eef1ff8494cb7fbc2e818e6aff7a34f > > v4l2: add v4l2_device and v4l2_subdev structs to the v4l2 > > framework. > > > > From: Hans Verkuil > > > > Start implementing a proper v4l2 framework as discussed during the > > Linux Plumbers Conference 2008. > > > > Introduces v4l2_device (for device instances) and v4l2_subdev > > (representing sub-device instances). > > > > Priority: normal > > > > Signed-off-by: Hans Verkuil > > Comments inlined. I've reviewed the general approach only, so there > might be some small issues at the code level that I haven't noticed. > > Would you mind holding the push request until we're done discussing > the points I mention throughout this e-mail ? Sure, no problem. > > > --- a/linux/drivers/media/video/Makefile Mon Nov 24 10:51:20 2008 > > -0200 +++ b/linux/drivers/media/video/Makefile Mon Nov 24 22:09:50 > > 2008 +0100 @@ -8,7 +8,7 @@ msp3400-objs := msp3400-driver.o msp3400 > > > > stkwebcam-objs := stk-webcam.o stk-sensor.o > > > > -videodev-objs := v4l2-dev.o v4l2-ioctl.o > > +videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o > > v4l2-subdev.o > > > > obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-compat-ioctl32.o > > v4l2-int-device.o > > > > --- /dev/null Thu Jan 01 00:00:00 1970 +0000 > > +++ b/linux/Documentation/video4linux/v4l2-framework.txt Mon Nov 24 > > 22:09:50 2008 +0100 @@ -0,0 +1,360 @@ > > +Overview of the V4L2 driver framework > > +===================================== > > + > > +This text documents the various structures provided by the V4L2 > > framework and +their relationships. > > + > > + > > +Introduction > > +------------ > > + > > +The V4L2 drivers tend to be very complex due to the complexity of > > the +hardware: most devices have multiple ICs, export multiple > > device nodes in +/dev, and create also non-V4L2 devices such as > > DVB, ALSA, FB, I2C and input +(IR) devices. > > + > > +Especially the fact that V4L2 drivers have to setup supporting ICs > > to +do audio/video muxing/encoding/decoding makes it more complex > > than most. +Usually these ICs are connected to the main bridge > > driver through one or +more I2C busses, but other busses can also > > be used. Such devices are +called 'sub-devices'. > > Do you know of other busses being used in (Linux supported) real > video hardware, or is it currently theoretical only ? The pxa_camera driver is one example of that. Also devices driven by GPIO pins can be implemented this way. I did that in ivtv for example: most cards use i2c audio muxers, but some have audio muxers that are commanded through GPIO so I created a v4l2_subdev that uses GPIO to drive these chips. Works very well indeed. > > +For a long time the framework was limited to the video_device > > struct for +creating V4L device nodes and video_buf for handling > > the video buffers +(note that this document does not discuss the > > video_buf framework). + > > +This meant that all drivers had to do the setup of device > > instances and +connecting to sub-devices themselves. Some of this > > is quite complicated +to do right and many drivers never did do it > > correctly. > > + > > +There is also a lot of common code that could never be refactored > > due to +the lack of a framework. > > + > > +So this framework sets up the basic building blocks that all > > drivers +need and this same framework should make it much easier to > > refactor +common code into utility functions shared by all drivers. > > + > > + > > +Structure of a driver > > +--------------------- > > + > > +All drivers have the following structure: > > + > > +1) A struct for each device instance containing the device state. > > + > > +2) A way of initializing and commanding sub-devices. > > This only applies to drivers handling "composite devices" (systems > including sub-devices). Let's make sure the proposed framework > doesn't make "simple devices" more complex to handle that they are > now. I will make a note of this. > > +3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX, /dev/radioX > > and + /dev/vtxX) and keeping track of device-node specific data. > > + > > +4) Filehandle-specific structs containing per-filehandle data. > > + > > +This is a rough schematic of how it all relates: > > + > > + device instances > > + | > > + +-sub-device instances > > + | > > + \-V4L2 device nodes > > + | > > + \-filehandle instances > > + > > + > > +Structure of the framework > > +-------------------------- > > + > > +The framework closely resembles the driver structure: it has a > > v4l2_device +struct for the device instance data, a v4l2_subdev > > struct to refer to +sub-device instances, the video_device struct > > stores V4L2 device node data +and a v4l2_fh struct keeps track of > > filehandle instances (TODO: not yet +implemented). > > + > > + > > +struct v4l2_device > > +------------------ > > + > > +Each device instance is represented by a struct v4l2_device > > (v4l2-device.h). +Very simple devices can just allocate this > > struct, but most of the time you +would embed this struct inside a > > larger struct. + > > +You must register the device instance: > > + > > + v4l2_device_register(struct device *dev, struct v4l2_device > > *v4l2_dev); + > > +Registration will initialize the v4l2_device struct and link > > dev->platform_data +to v4l2_dev. > > That's an abuse of platform_data, I don't think it was ever meant > that way. I took another look at this, and dev_set_drvdata() is a better solution. I'll change it. > > Registration will also set v4l2_dev->name > > to a value derived from +dev (driver name followed by the bus_id, > > to be precise). You may change the +name after registration if you > > want. + > > +You unregister with: > > + > > + v4l2_device_unregister(struct v4l2_device *v4l2_dev); > > + > > +Unregistering will also automatically unregister all subdevs from > > the device. + > > +Sometimes you need to iterate over all devices registered by a > > specific +driver. This is usually the case if multiple device > > drivers use the same +hardware. E.g. the ivtvfb driver is a > > framebuffer driver that uses the ivtv +hardware. The same is true > > for alsa drivers for example. + > > +You can iterate over all registered devices as follows: > > + > > +static int callback(struct device *dev, void *p) > > +{ > > + struct v4l2_device *v4l2_dev = dev->platform_data; > > + > > + /* test if this device was inited */ > > + if (v4l2_dev == NULL) > > + return 0; > > + ... > > + return 0; > > +} > > + > > +int iterate(void *p) > > +{ > > + struct device_driver *drv; > > + int err; > > + > > + /* Find driver 'ivtv' on the PCI bus. > > + pci_bus_type is a global. For USB busses use usb_bus_type. */ > > + drv = driver_find("ivtv", &pci_bus_type); > > + /* iterate over all ivtv device instances */ > > + err = driver_for_each_device(drv, NULL, p, callback); > > + put_driver(drv); > > + return err; > > +} > > I'm not sure to really see what use cases you're talking about. The > above code looks good, but iterating over device bound to specific > drivers should be done with care as it might be the sign of badly > designed code. Every new instance of the above code should be > reviewed with care. This is only relevant when you have two separate drivers that both use the same hardware. This is the case for e.g. ivtv and ivtvfb (the framebuffer driver) and for e.g. cx88 and cx88-alsa (the alsa driver). In both cases the second driver needs to find the core data structures of the main driver. Right now this is implemented by having lists of device instances in the main driver which the secondary driver walks to find the devices. However, this information is already present in the kernel so rather than duplicating this information it is much better to use the kernel API to get hold of it. I put this code in the documentation since it not trivial to figure this out, which is probably the reason everyone keeps their own list. > > +Sometimes you need to keep a running counter of the device > > instance. This is +commonly used to map a device instance to an > > index of a module option array. + > > +The recommended approach is as follows: > > + > > +static atomic_t drv_instance = ATOMIC_INIT(0); > > + > > +static int __devinit drv_probe(struct pci_dev *dev, > > + const struct pci_device_id *pci_id) > > +{ > > + ... > > + state->instance = atomic_inc_return(&drv_instance) - 1; > > +} > > + > > + > > +struct v4l2_subdev > > +------------------ > > + > > +Many drivers need to communicate with sub-devices. These devices > > can do all +sort of tasks, but most commonly they handle audio > > and/or video muxing, +encoding or decoding. For webcams common > > sub-devices are sensors and camera +controllers. > > + > > +Usually these are I2C devices, but not necessarily. In order to > > provide the +driver with a consistent interface to these > > sub-devices the v4l2_subdev struct +(v4l2-subdev.h) was created. > > + > > +Each sub-device driver must have a v4l2_subdev struct. This struct > > can be +stand-alone for simple sub-devices or it might be embedded > > in a larger struct +if more state information needs to be stored. > > Usually there is a low-level +device struct (e.g. i2c_client) that > > contains the device data as setup +by the kernel. It is recommended > > to store that pointer in the private +data of v4l2_subdev using > > v4l2_set_subdevdata(). That makes it easy to go +from a v4l2_subdev > > to the actual low-level bus-specific device data. + > > +You also need a way to go from the low-level struct to > > v4l2_subdev. For the +common i2c_client struct the > > i2c_set_clientdata() call is used to store a +v4l2_subdev pointer, > > for other busses you may have to use other methods. + > > +From the bridge driver perspective you load the sub-device module > > and somehow +obtain the v4l2_subdev pointer. For i2c devices this > > is easy: you call +i2c_get_clientdata(). For other busses something > > similar needs to be done. +Helper functions exists for sub-devices > > on an I2C bus that do most of this +tricky work for you. > > + > > +Each v4l2_subdev contains function pointers that sub-device > > drivers can +implement (or leave NULL if it is not applicable). > > Since sub-devices can do +so many different things and you do not > > want to end up with a huge ops struct +of which only a handful of > > ops are commonly implemented, the function pointers +are sorted > > according to category and each category has its own ops struct. + > > I like that. Thank you :-) I've done my best to sort everything into sensible categories, but once all i2c drivers are converted I'll probably do another review of this and move some ops around if appropriate. > > +The top-level ops struct contains pointers to the category ops > > structs, which +may be NULL if the subdev driver does not support > > anything from that category. + > > +It looks like this: > > + > > +struct v4l2_subdev_core_ops { > > + int (*g_chip_ident)(struct v4l2_subdev *sd, struct > > v4l2_chip_ident *chip); + int (*log_status)(struct v4l2_subdev > > *sd); > > + int (*init)(struct v4l2_subdev *sd, u32 val); > > + ... > > +}; > > + > > +struct v4l2_subdev_tuner_ops { > > + ... > > +}; > > + > > +struct v4l2_subdev_audio_ops { > > + ... > > +}; > > + > > +struct v4l2_subdev_video_ops { > > + ... > > +}; > > + > > +struct v4l2_subdev_ops { > > + const struct v4l2_subdev_core_ops *core; > > + const struct v4l2_subdev_tuner_ops *tuner; > > + const struct v4l2_subdev_audio_ops *audio; > > + const struct v4l2_subdev_video_ops *video; > > +}; > > + > > +The core ops are common to all subdevs, the other categories are > > implemented +depending on the sub-device. E.g. a video device is > > unlikely to support the +audio ops and vice versa. > > + > > +This setup limits the number of function pointers while still > > making it easy +to add new ops and categories. > > + > > +A sub-device driver initializes the v4l2_subdev struct using: > > + > > + v4l2_subdev_init(subdev, &ops); > > + > > +Afterwards you need to initialize subdev->name with a unique name > > and set the +module owner. This is done for you if you use the i2c > > helper functions. + > > +A device (bridge) driver needs to register the v4l2_subdev with > > the +v4l2_device: > > + > > + int err = v4l2_device_register_subdev(device, subdev); > > + > > +This can fail if the subdev module disappeared before it could be > > registered. +After this function was called successfully the > > subdev->dev field points to +the v4l2_device. > > + > > +You can unregister a sub-device using: > > + > > + v4l2_device_unregister_subdev(subdev); > > + > > +Afterwards the subdev module can be unloaded and subdev->dev == > > NULL. + > > +You can call an ops function either directly: > > + > > + err = subdev->ops->core->g_chip_ident(subdev, &chip); > > + > > +but it is better and easier to use this macro: > > + > > + err = v4l2_subdev_call(subdev, core, g_chip_ident, &chip); > > + > > +The macro will to the right NULL pointer checks and returns > > -ENODEV if subdev +is NULL, > > This should probably be checked when registering the sub-device > instead of at all calls to sub-device operations. That was my initial approach as well, but it is actually quite handy to have. For example in the ivtv driver there are some cards that can do video output. What I can do with this is to use a v4l2_subdev pointer which is NULL if the card doesn't support this feature. At the moment I have to check for this feature every time. The overhead is minimal, but it makes life easier and it allows for cleaner driver code. Actually this idea came from Sakari Ailus and his v4l2-int-device work. > > -ENOIOCTLCMD if either subdev->core or > > subdev->core->g_chip_ident is +NULL, or the actual result of the > > subdev->ops->core->g_chip_ident ops. + > > +It is also possible to call all or a subset of the sub-devices: > > + > > + v4l2_device_call_all(dev, 0, core, g_chip_ident, &chip); > > + > > +Any subdev that does not support this ops is skipped and error > > results are +ignored. If you want to check for errors use this: > > + > > + err = v4l2_device_call_until_err(dev, 0, core, g_chip_ident, > > &chip); + > > +Any error except -ENOIOCTLCMD will exit the loop with that error. > > If no +errors (except -ENOIOCTLCMD) occured, then 0 is returned. + > > +The second argument to both calls is a group ID. If 0, then all > > subdevs are +called. If non-zero, then only those whose group ID > > match that value will +be called. Before a bridge driver registers > > a subdev it can set subdev->grp_id +to whatever value it wants > > (it's 0 by default). This value is owned by the +bridge driver and > > the sub-device driver will never modify or use it. + > > +The group ID gives the bridge driver more control how callbacks > > are called. +For example, there may be multiple audio chips on a > > board, each capable of +changing the volume. But usually only one > > will actually be used when the +user want to change the volume. You > > can set the group ID for that subdev to +e.g. AUDIO_CONTROLLER and > > specify that as the group ID value when calling > > +v4l2_device_call_all(). That ensures that it will only go to the > > subdev +that needs it. > > This is interesting as well. Thanks to the brainstorm we had at the Linux Plumbers Conference. I think it was either Steve Toth or Mike Krufky who came up with this idea. > > +The advantage of using v4l2_subdev is that it is a generic struct > > and does +not contain any knowledge about the underlying hardware. > > So a driver might +contain several subdevs that use an I2C bus, but > > also a subdev that is +controlled through GPIO pins. This > > distinction is only relevant when setting +up the device, but once > > the subdev is registered it is completely transparent. + > > The bridge driver won't have to care about how sub-devices are > accessed, but sub-devices drivers will have to be written > specifically for the V4L2 subsystem. Do we have I2C devices shared > between V4L(2) and DVB (and possible other subsystems) ? How would > those be handled ? If your goal is to share v4l2_subdev drivers > between V4L(2) and DVB I don't think the v4l2_ prefix is right. I've gone back and forth between a v4l2_ and a media_ prefix a few times now and I've settled on v4l2_ (for now at least). First of all, at the moment it is a purely v4l2 interface. Secondly, I'm not entirely sure what sort of modifications I need to make to make it possible for DVB to start using this. It's a separate (but interesting) project and based on results of that it might well turn out that the prefix will be changed to something like media_. However, starting to use the media_ prefix at this stage suggests that it is something that it definitely isn't at the moment. > > +I2C sub-device drivers > > +---------------------- > > + > > +Since these drivers are so common, special helper functions are > > available to +ease the use of these drivers (v4l2-common.h). > > + > > +The recommended method of adding v4l2_subdev support to an I2C > > driver is to +embed the v4l2_subdev struct into the state struct > > that is created for each +I2C device instance. Very simple devices > > have no state struct and in that case +you can just create a > > v4l2_subdev directly. > > The only I2C video-related chips I've dealt with were the ones used > by DC10/DC10+ boards and those have no state struct. What is the > state struct in your description ? Is it the driver-specific data > allocated when the device is probed ? Hmm, I need to clarify this: most i2c drivers (but not all) have a struct containing state information. The exact contents depends of course on the driver. > > +Initialize the v4l2_subdev struct as follows: > > + > > + v4l2_i2c_subdev_init(&state->sd, client, subdev_ops); > > + > > +This function will fill in all the fields of v4l2_subdev and > > ensure that the +v4l2_subdev and i2c_client both point to one > > another. + > > +You should also add a helper inline function to go from a > > v4l2_subdev pointer +to the state struct: > > + > > +static inline struct subdev_state *to_state(struct v4l2_subdev > > *sd) +{ > > + return container_of(sd, struct subdev_state, sd); > > +} > > _state might be a better name, it would avoid namespace > clashes (I'm aware the state structure is supposed to be private to > the I2C device driver, but we never know what might happen). OK. > > +Use this to go from the v4l2_subdev struct to the i2c_client > > struct: + > > + struct i2c_client *client = v4l2_get_subdevdata(sd); > > + > > +And this to go from an i2c_client to a v4l2_subdev struct: > > + > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + > > +Finally you need to make a command function to make > > driver->command() +call the right subdev_ops functions: > > + > > +static int subdev_command(struct i2c_client *client, unsigned cmd, > > void *arg) +{ > > + return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg); > > +} > > + > > +If driver->command is never used then you can leave this out. > > Eventually the +driver->command usage should be removed from v4l. > > Should it then be added to the list of features scheduled for removal > ? No, driver->command is part of the i2c subsystem and we are not the only users, so it can't be scheduled for removal. But it is probably possible to add some check on this command callback at some low-level v4l2 core function to ensure it isn't used. But this is quite some time in the future for now. > > +Make sure to call v4l2_device_unregister_subdev(sd) when the > > remove() callback +is called. This will unregister the sub-device > > from the bridge driver. It is +safe to call this even if the > > sub-device was never registered. > > + > > + > > +The bridge driver also has some helper functions it can use: > > + > > +struct v4l2_subdev *sd = v4l2_i2c_new_subdev(adapter, > > "module_foo", "chipid", 0x36); + > > +This loads the given module (can be NULL if no module needs to be > > loaded) and +calls i2c_new_device() with the given i2c_adapter and > > chip/address arguments. +If all goes well, then it registers the > > subdev with the v4l2_device. It gets +the v4l2_device by calling > > i2c_get_adapdata(adapter), so you should make sure +that adapdata > > is set to v4l2_device when you setup the i2c_adapter in your > > +driver. > > + > > +You can also use v4l2_i2c_new_probed_subdev() which is very > > similar to +v4l2_i2c_new_subdev(), except that it has an array of > > possible I2C addresses +that it should probe. Internally it calls > > i2c_new_probed_device(). + > > +Both functions return NULL if something went wrong. > > + > > + > > +struct video_device > > +------------------- > > + > > +TODO: document. > > Do you plan to change the video_device structure ? I want to add a v4l2_device pointer to it, but that's all for now. > > + > > +struct v4l2_fh > > +-------------- > > + > > +TODO: document. > > I can't find that structure anywhere in your patches. Shouldn't it be > removed from the document and added back when you introduce it ? Yes, I think so too. > > > --- /dev/null Thu Jan 01 00:00:00 1970 +0000 > > +++ b/linux/drivers/media/video/v4l2-device.c Mon Nov 24 22:09:50 > > 2008 +0100 @@ -0,0 +1,80 @@ > > +/* > > + V4L2 device support. > > + > > + Copyright (C) 2008 Hans Verkuil > > + > > + This program is free software; you can redistribute it and/or > > modify + it under the terms of the GNU General Public License as > > published by + the Free Software Foundation; either version 2 of > > the License, or + (at your option) any later version. > > + > > + This program is distributed in the hope that it will be > > useful, + but WITHOUT ANY WARRANTY; without even the implied > > warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR > > PURPOSE. See the + GNU General Public License for more details. > > + > > + You should have received a copy of the GNU General Public > > License + along with this program; if not, write to the Free > > Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, > > MA 02111-1307 USA + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +void v4l2_device_register(struct device *dev, struct v4l2_device > > *v4l2_dev) +{ > > + BUG_ON(!dev || !v4l2_dev || dev->platform_data); > > + INIT_LIST_HEAD(&v4l2_dev->subdevs); > > + mutex_init(&v4l2_dev->lock); > > + v4l2_dev->dev = dev; > > + snprintf(v4l2_dev->name, sizeof(v4l2_dev->name), "%s %s", > > + dev->driver->name, dev->bus_id); > > + dev->platform_data = v4l2_dev; > > +} > > +EXPORT_SYMBOL(v4l2_device_register); > > + > > +void v4l2_device_unregister(struct v4l2_device *v4l2_dev) > > +{ > > + struct v4l2_subdev *sd, *next; > > + > > + BUG_ON(!v4l2_dev || !v4l2_dev->dev || > > !v4l2_dev->dev->platform_data); + v4l2_dev->dev->platform_data = > > NULL; > > + /* unregister subdevs */ > > + list_for_each_entry_safe(sd, next, &v4l2_dev->subdevs, list) > > + v4l2_device_unregister_subdev(sd); > > + > > + v4l2_dev->dev = NULL; > > +} > > +EXPORT_SYMBOL(v4l2_device_unregister); > > + > > +int v4l2_device_register_subdev(struct v4l2_device *dev, struct > > v4l2_subdev *sd) +{ > > + /* Check that sd->dev is not set and that the subdev's name is > > + filled in. */ > > + BUG_ON(!dev || !sd || sd->dev || !sd->name[0]); > > + if (!try_module_get(sd->owner)) > > + return -ENODEV; > > + sd->dev = dev; > > + mutex_lock(&dev->lock); > > + list_add_tail(&sd->list, &dev->subdevs); > > + mutex_unlock(&dev->lock); > > + return 0; > > +} > > +EXPORT_SYMBOL(v4l2_device_register_subdev); > > + > > +void v4l2_device_unregister_subdev(struct v4l2_subdev *sd) > > +{ > > + BUG_ON(!sd); > > + /* return if it isn't registered */ > > + if (sd->dev == NULL) > > + return; > > + mutex_lock(&sd->dev->lock); > > + list_del(&sd->list); > > + mutex_unlock(&sd->dev->lock); > > + sd->dev = NULL; > > + module_put(sd->owner); > > +} > > +EXPORT_SYMBOL(v4l2_device_unregister_subdev); > > --- /dev/null Thu Jan 01 00:00:00 1970 +0000 > > +++ b/linux/drivers/media/video/v4l2-subdev.c Mon Nov 24 22:09:50 > > 2008 +0100 @@ -0,0 +1,108 @@ > > +/* > > + V4L2 sub-device support. > > + > > + Copyright (C) 2008 Hans Verkuil > > + > > + This program is free software; you can redistribute it and/or > > modify + it under the terms of the GNU General Public License as > > published by + the Free Software Foundation; either version 2 of > > the License, or + (at your option) any later version. > > + > > + This program is distributed in the hope that it will be > > useful, + but WITHOUT ANY WARRANTY; without even the implied > > warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR > > PURPOSE. See the + GNU General Public License for more details. > > + > > + You should have received a copy of the GNU General Public > > License + along with this program; if not, write to the Free > > Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, > > MA 02111-1307 USA + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void > > *arg) +{ > > + switch (cmd) { > > + case VIDIOC_QUERYCTRL: > > + return v4l2_subdev_call(sd, core, querymenu, arg); > > + case VIDIOC_G_CTRL: > > + return v4l2_subdev_call(sd, core, g_ctrl, arg); > > + case VIDIOC_S_CTRL: > > + return v4l2_subdev_call(sd, core, s_ctrl, arg); > > + case VIDIOC_QUERYMENU: > > + return v4l2_subdev_call(sd, core, queryctrl, arg); > > + case VIDIOC_LOG_STATUS: > > + return v4l2_subdev_call(sd, core, log_status); > > + case VIDIOC_G_CHIP_IDENT: > > + return v4l2_subdev_call(sd, core, g_chip_ident, arg); > > + case VIDIOC_INT_S_STANDBY: > > + return v4l2_subdev_call(sd, core, s_standby, *(u32 *)arg); > > + case VIDIOC_INT_RESET: > > + return v4l2_subdev_call(sd, core, reset, *(u32 *)arg); > > + case VIDIOC_INT_S_GPIO: > > + return v4l2_subdev_call(sd, core, s_gpio, *(u32 *)arg); > > + case VIDIOC_INT_INIT: > > + return v4l2_subdev_call(sd, core, init, *(u32 *)arg); > > +#ifdef CONFIG_VIDEO_ADV_DEBUG > > + case VIDIOC_DBG_G_REGISTER: > > + return v4l2_subdev_call(sd, core, g_register, arg); > > + case VIDIOC_DBG_S_REGISTER: > > + return v4l2_subdev_call(sd, core, s_register, arg); > > +#endif > > + > > + case VIDIOC_INT_S_TUNER_MODE: > > + return v4l2_subdev_call(sd, tuner, s_mode, *(enum > > v4l2_tuner_type *)arg); + case AUDC_SET_RADIO: > > + return v4l2_subdev_call(sd, tuner, s_radio); > > + case VIDIOC_S_TUNER: > > + return v4l2_subdev_call(sd, tuner, s_tuner, arg); > > + case VIDIOC_G_TUNER: > > + return v4l2_subdev_call(sd, tuner, g_tuner, arg); > > + case VIDIOC_S_STD: > > + return v4l2_subdev_call(sd, tuner, s_std, *(v4l2_std_id *)arg); > > + case VIDIOC_S_FREQUENCY: > > + return v4l2_subdev_call(sd, tuner, s_frequency, arg); > > + case VIDIOC_G_FREQUENCY: > > + return v4l2_subdev_call(sd, tuner, g_frequency, arg); > > + case TUNER_SET_TYPE_ADDR: > > + return v4l2_subdev_call(sd, tuner, s_type_addr, arg); > > + case TUNER_SET_CONFIG: > > + return v4l2_subdev_call(sd, tuner, s_config, arg); > > + > > + case VIDIOC_INT_AUDIO_CLOCK_FREQ: > > + return v4l2_subdev_call(sd, audio, s_clock_freq, *(u32 *)arg); > > + case VIDIOC_INT_S_AUDIO_ROUTING: > > + return v4l2_subdev_call(sd, audio, s_routing, arg); > > + case VIDIOC_INT_I2S_CLOCK_FREQ: > > + return v4l2_subdev_call(sd, audio, s_i2s_clock_freq, *(u32 > > *)arg); + > > + case VIDIOC_INT_S_VIDEO_ROUTING: > > + return v4l2_subdev_call(sd, video, s_routing, arg); > > + case VIDIOC_INT_S_CRYSTAL_FREQ: > > + return v4l2_subdev_call(sd, video, s_crystal_freq, arg); > > + case VIDIOC_INT_DECODE_VBI_LINE: > > + return v4l2_subdev_call(sd, video, decode_vbi_line, arg); > > + case VIDIOC_INT_S_VBI_DATA: > > + return v4l2_subdev_call(sd, video, s_vbi_data, arg); > > + case VIDIOC_INT_G_VBI_DATA: > > + return v4l2_subdev_call(sd, video, g_vbi_data, arg); > > + case VIDIOC_S_FMT: > > + return v4l2_subdev_call(sd, video, s_fmt, arg); > > + case VIDIOC_G_FMT: > > + return v4l2_subdev_call(sd, video, g_fmt, arg); > > + case VIDIOC_INT_S_STD_OUTPUT: > > + return v4l2_subdev_call(sd, video, s_std_output, *(v4l2_std_id > > *)arg); + case VIDIOC_STREAMON: > > + return v4l2_subdev_call(sd, video, s_stream, 1); > > + case VIDIOC_STREAMOFF: > > + return v4l2_subdev_call(sd, video, s_stream, 0); > > + > > + default: > > + return v4l2_subdev_call(sd, core, ioctl, cmd, arg); > > + } > > +} > > +EXPORT_SYMBOL(v4l2_subdev_command); > > --- /dev/null Thu Jan 01 00:00:00 1970 +0000 > > +++ b/linux/include/media/v4l2-device.h Mon Nov 24 22:09:50 2008 > > +0100 @@ -0,0 +1,124 @@ > > +/* > > + V4L2 device support header. > > + > > + Copyright (C) 2008 Hans Verkuil > > + > > + This program is free software; you can redistribute it and/or > > modify + it under the terms of the GNU General Public License as > > published by + the Free Software Foundation; either version 2 of > > the License, or + (at your option) any later version. > > + > > + This program is distributed in the hope that it will be > > useful, + but WITHOUT ANY WARRANTY; without even the implied > > warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR > > PURPOSE. See the + GNU General Public License for more details. > > + > > + You should have received a copy of the GNU General Public > > License + along with this program; if not, write to the Free > > Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, > > MA 02111-1307 USA + */ > > + > > +#ifndef _V4L2_DEVICE_H > > +#define _V4L2_DEVICE_H > > + > > +#include > > + > > +/* Each instance of a V4L2 device should create the v4l2_device > > struct, + either stand-alone or embedded in a larger struct. > > Is it required for all V4L2 devices, or only those that use > subdevices ? What's the added value of v4l2_device for "simple" > devices such as UVC webcams ? > > > + It allows easy access to sub-devices (see v4l2-subdev.h) and > > provides + basic V4L2 device-level support. > > + > > + Each driver should set a unique driver ID and instance number > > (usually + 0 for the first instance and counting upwards from > > there). + > > + It is recommended to set the name as follows: > > + > > + + instance number > > + > > + If the driver name ends with a digit, then put a '-' between > > the driver + name and the instance number. > > The name field is automatically filled by v4l2_device_register. I > think the comment is outdated. Oops, you are right. > > + */ > > + > > +#define V4L2_DEVICE_NAME_SIZE 32 > > The device name is made of the driver name and the bus id. The driver > name has no upper bound, but the bus id is limited to BUS_ID_SIZE > (currently 20) bytes. Shouldn't V4L2_DEVICE_NAME_SIZE be defined as > (BUS_ID_SIZE + reasonable constant for the driver name) ? Agreed. > > +struct v4l2_device { > > + /* dev->platform_data points to this struct */ > > + struct device *dev; > > + /* used to keep track of the registered subdevs */ > > + struct list_head subdevs; > > + /* lock this struct; can be used by the driver as well if this > > + struct is embedded into a larger struct. */ > > + struct mutex lock; > > + /* unique device name */ > > + char name[V4L2_DEVICE_NAME_SIZE]; > > +}; > > + > > +/* Initialize v4l2_dev and make dev->platform_data point to > > v4l2_dev */ +void v4l2_device_register(struct device *dev, struct > > v4l2_device *v4l2_dev); +/* Set v4l2_dev->dev->platform_data to > > NULL and unregister all sub-devices */ +void > > v4l2_device_unregister(struct v4l2_device *v4l2_dev); + > > +/* Register a subdev with a v4l2 device. While registered the > > subdev module + is marked as in-use. An error is returned if the > > module is no longer + loaded when you attempt to register it. */ > > +int v4l2_device_register_subdev(struct v4l2_device *dev, struct > > v4l2_subdev *sd); +/* Unregister a subdev with a v4l2 device. Can > > also be called if the subdev + wasn't registered. In that case it > > will do nothing. */ > > +void v4l2_device_unregister_subdev(struct v4l2_subdev *sd); > > + > > +/* Iterate over all subdevs. Warn if you iterate over the subdevs > > without + the device struct being locked. The next item is > > prefetched, so you can + delete the current item if necessary. */ > > +#define v4l2_device_for_each_subdev(sd, dev) \ > > + for (sd = list_entry((dev)->subdevs.next, typeof(*sd), list), \ > > + ({ WARN_ON(!mutex_is_locked(&(dev)->lock)); 0; }); \ > > + prefetch(sd->list.next), &sd->list != &(dev)->subdevs; \ > > + sd = list_entry(sd->list.next, typeof(*sd), list)) > > + > > +/* Call the specified callback for all subdevs matching the > > condition. + Ignore any errors. */ > > +#define __v4l2_device_call_subdevs(dev, cond, o, f, args...) \ > > + do { \ > > + struct v4l2_subdev *sd; \ > > + \ > > + mutex_lock(&(dev)->lock); \ > > + list_for_each_entry(sd, &(dev)->subdevs, list) \ > > + if ((cond) && sd->ops->o && sd->ops->o->f) \ > > + sd->ops->o->f(sd , ##args); \ > > + mutex_unlock(&(dev)->lock); \ > > + } while (0) > > + > > +/* Call the specified callback for all subdevs matching the > > condition. + If the callback returns an error other than 0 or > > -ENOIOCTLCMD, then + return with that error code. */ > > +#define __v4l2_device_call_subdevs_until_err(dev, cond, o, f, > > args...) \ +({ \ > > + struct v4l2_subdev *sd; \ > > + int err = 0; \ > > + \ > > + mutex_lock(&(dev)->lock); \ > > + list_for_each_entry(sd, &(dev)->subdevs, list) { \ > > + if ((cond) && sd->ops->o && sd->ops->o->f) \ > > + err = sd->ops->o->f(sd , ##args); \ > > + if (err && err != -ENOIOCTLCMD) \ > > + break; \ > > + } \ > > + mutex_unlock(&(dev)->lock); \ > > + (err == -ENOIOCTLCMD) ? 0 : err; \ > > +}) > > + > > +/* Call the specified callback for all subdevs matching grp_id (if > > 0, then + match them all). Ignore any errors. */ > > +#define v4l2_device_call_all(dev, grp_id, o, f, args...) \ > > + __v4l2_device_call_subdevs(dev, \ > > + !(grp_id) || sd->grp_id == (grp_id), o, f , ##args) > > + > > +/* Call the specified callback for all subdevs matching grp_id (if > > 0, then + match them all). If the callback returns an error other > > than 0 or + -ENOIOCTLCMD, then return with that error code. */ > > +#define v4l2_device_call_until_err(dev, grp_id, o, f, args...) \ > > + __v4l2_device_call_subdevs_until_err(dev, \ > > + !(grp_id) || sd->grp_id == (grp_id), o, f , ##args) > > + > > +#endif > > --- /dev/null Thu Jan 01 00:00:00 1970 +0000 > > +++ b/linux/include/media/v4l2-subdev.h Mon Nov 24 22:09:50 2008 > > +0100 @@ -0,0 +1,188 @@ > > +/* > > + V4L2 sub-device support header. > > + > > + Copyright (C) 2008 Hans Verkuil > > + > > + This program is free software; you can redistribute it and/or > > modify + it under the terms of the GNU General Public License as > > published by + the Free Software Foundation; either version 2 of > > the License, or + (at your option) any later version. > > + > > + This program is distributed in the hope that it will be > > useful, + but WITHOUT ANY WARRANTY; without even the implied > > warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR > > PURPOSE. See the + GNU General Public License for more details. > > + > > + You should have received a copy of the GNU General Public > > License + along with this program; if not, write to the Free > > Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, > > MA 02111-1307 USA + */ > > + > > +#ifndef _V4L2_SUBDEV_H > > +#define _V4L2_SUBDEV_H > > + > > +#include > > + > > +struct v4l2_device; > > +struct v4l2_subdev; > > +struct tuner_setup; > > + > > +/* Sub-devices are devices that are connected somehow to the main > > bridge + device. These devices are usually audio/video > > muxers/encoders/decoders or + sensors and webcam controllers. > > + > > + Usually these devices are controlled through an i2c bus, but > > other busses + may also be used. > > + > > + The v4l2_subdev struct provides a way of accessing these > > devices in a + generic manner. Most operations that these > > sub-devices support fall in + a few categories: core ops, audio > > ops, video ops and tuner ops. + > > + More categories can be added if needed, although this should > > remain a + limited set (no more than approx. 8 categories). > > + > > + Each category has its own set of ops that subdev drivers can > > implement. + > > + A subdev driver can leave the pointer to the category ops NULL > > if + it does not implement them (e.g. an audio subdev will > > generally not + implement the video category ops). The exception > > is the core category: + this must always be present. > > + > > + These ops are all used internally so it is no problem to > > change, remove + or add ops or move ops from one to another > > category. Currently these + ops are based on the original ioctls, > > but since ops are not limited to + one argument there is room for > > improvement here once all i2c subdev + drivers are converted to > > use these ops. > > + */ > > + > > +/* Core ops: it is highly recommended to implement at least these > > ops: + > > + g_chip_ident > > + log_status > > + g_register > > + s_register > > + > > + This provides basic debugging support. > > + > > + The ioctl ops is meant for generic ioctl-like commands. > > Depending on + the use-case it might be better to use > > subdev-specific ops (currently + not yet implemented) since ops > > provide proper type-checking. + */ > > +struct v4l2_subdev_core_ops { > > + int (*g_chip_ident)(struct v4l2_subdev *sd, struct > > v4l2_chip_ident *chip); + int (*log_status)(struct v4l2_subdev > > *sd); > > + int (*init)(struct v4l2_subdev *sd, u32 val); > > + int (*s_standby)(struct v4l2_subdev *sd, u32 standby); > > + int (*reset)(struct v4l2_subdev *sd, u32 val); > > + int (*s_gpio)(struct v4l2_subdev *sd, u32 val); > > + int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl > > *qc); + int (*g_ctrl)(struct v4l2_subdev *sd, struct v4l2_control > > *ctrl); + int (*s_ctrl)(struct v4l2_subdev *sd, struct v4l2_control > > *ctrl); + int (*querymenu)(struct v4l2_subdev *sd, struct > > v4l2_querymenu *qm); + int (*ioctl)(struct v4l2_subdev *sd, int > > cmd, void *arg); +#ifdef CONFIG_VIDEO_ADV_DEBUG > > + int (*g_register)(struct v4l2_subdev *sd, struct v4l2_register > > *reg); + int (*s_register)(struct v4l2_subdev *sd, struct > > v4l2_register *reg); +#endif > > +}; > > + > > +struct v4l2_subdev_tuner_ops { > > + int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type); > > + int (*s_radio)(struct v4l2_subdev *sd); > > + int (*s_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency > > *freq); + int (*g_frequency)(struct v4l2_subdev *sd, struct > > v4l2_frequency *freq); + int (*g_tuner)(struct v4l2_subdev *sd, > > struct v4l2_tuner *vt); + int (*s_tuner)(struct v4l2_subdev *sd, > > struct v4l2_tuner *vt); + int (*s_std)(struct v4l2_subdev *sd, > > v4l2_std_id norm); > > + int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup > > *type); + int (*s_config)(struct v4l2_subdev *sd, const struct > > v4l2_priv_tun_config *config); +}; > > + > > +struct v4l2_subdev_audio_ops { > > + int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq); > > + int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq); > > + int (*s_routing)(struct v4l2_subdev *sd, const struct > > v4l2_routing *route); +}; > > + > > +struct v4l2_subdev_video_ops { > > + int (*s_routing)(struct v4l2_subdev *sd, const struct > > v4l2_routing *route); + int (*s_crystal_freq)(struct v4l2_subdev > > *sd, struct v4l2_crystal_freq *freq); + int > > (*decode_vbi_line)(struct v4l2_subdev *sd, struct > > v4l2_decode_vbi_line *vbi_line); + int (*s_vbi_data)(struct > > v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data); > > + int (*g_vbi_data)(struct v4l2_subdev *sd, struct > > v4l2_sliced_vbi_data *vbi_data); + int (*s_std_output)(struct > > v4l2_subdev *sd, v4l2_std_id std); + int (*s_stream)(struct > > v4l2_subdev *sd, int enable); > > + int (*s_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt); > > + int (*g_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt); > > +}; > > + > > +struct v4l2_subdev_ops { > > + const struct v4l2_subdev_core_ops *core; > > + const struct v4l2_subdev_tuner_ops *tuner; > > + const struct v4l2_subdev_audio_ops *audio; > > + const struct v4l2_subdev_video_ops *video; > > +}; > > + > > +#define V4L2_SUBDEV_NAME_SIZE 32 > > + > > +/* Each instance of a subdev driver should create this struct, > > either + stand-alone or embedded in a larger struct. > > + */ > > +struct v4l2_subdev { > > + struct list_head list; > > + struct module *owner; > > + struct v4l2_device *dev; > > + const struct v4l2_subdev_ops *ops; > > + /* name must be unique */ > > + char name[V4L2_SUBDEV_NAME_SIZE]; > > + /* can be used to group similar subdevs, value is driver-specific > > */ + u32 grp_id; > > + /* pointer to private data */ > > + void *priv; > > +}; > > + > > +static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, > > void *p) +{ > > + sd->priv = p; > > +} > > + > > +static inline void *v4l2_get_subdevdata(const struct v4l2_subdev > > *sd) +{ > > + return sd->priv; > > +} > > + > > +/* Convert an ioctl-type command to the proper v4l2_subdev_ops > > function call. + This is used by subdev modules that can be > > called by both old-style ioctl + commands and through the > > v4l2_subdev_ops. + > > + The ioctl API of the subdev driver can call this function to > > call the + right ops based on the ioctl cmd and arg. > > + > > + Once all subdev drivers have been converted and all drivers no > > longer + use the ioctl interface, then this function can be > > removed. + */ > > +int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void > > *arg); + > > +static inline void v4l2_subdev_init(struct v4l2_subdev *sd, > > + const struct v4l2_subdev_ops *ops) > > +{ > > + INIT_LIST_HEAD(&sd->list); > > + /* ops->core MUST be set */ > > + BUG_ON(!ops || !ops->core); > > + sd->ops = ops; > > + sd->dev = NULL; > > + sd->name[0] = '\0'; > > + sd->grp_id = 0; > > + sd->priv = NULL; > > +} > > + > > +/* Call an ops of a v4l2_subdev, doing the right checks against > > + NULL pointers. > > + > > + Example: err = v4l2_subdev_call(sd, core, g_chip_ident, &chip); > > + */ > > +#define v4l2_subdev_call(sd, o, f, args...) \ > > + (!(sd) ? -ENODEV : (((sd) && (sd)->ops->o && (sd)->ops->o->f) ? \ > > + (sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD)) > > + > > +#endif > > > > -- > > video4linux-list mailing list > > Unsubscribe > > mailto:video4linux-list-request@redhat.com?subject=unsubscribe > > https://www.redhat.com/mailman/listinfo/video4linux-list Once again, thank you for the review. I'll update my repository accordingly. Regards, Hans -- Hans Verkuil - video4linux developer - sponsored by TANDBERG -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/