Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753244AbYLBII0 (ORCPT ); Tue, 2 Dec 2008 03:08:26 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751163AbYLBIIQ (ORCPT ); Tue, 2 Dec 2008 03:08:16 -0500 Received: from nn7.de ([85.214.94.156]:51094 "EHLO nn7.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750977AbYLBIIP (ORCPT ); Tue, 2 Dec 2008 03:08:15 -0500 Subject: ST31500341AS vs ICH10, exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen From: Soeren Sonnenburg To: Linux Kernel , Linux-ide Content-Type: text/plain Content-Transfer-Encoding: 7bit Date: Tue, 02 Dec 2008 09:08:09 +0100 Message-Id: <1228205289.29251.32.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.22.3.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 20054 Lines: 425 Dear all, I just purchased a seagate 1.5TB drive ST31500341AS, with firmware revision CC1G (which according to seagate is not affected by the cache flush bug) and I am getting the errors below (after almost a day of uptime without problems). The drive is replacing a 750G variant from seagate with which I had months of uptime and no errors whatsoever. I hope anyone has an idea? - relevant part of hdparm -I and lspci ATA device, with non-removable media Model Number: ST31500341AS Firmware Revision: CC1G Transport: Serial 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller - the error(tm) ata3.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen ata3.00: irq_stat 0x08000000, interface fatal error ata3: SError: { UnrecovData HostInt 10B8B BadCRC } ata3.00: cmd 60/00:00:20:d4:66/01:00:1e:00:00/40 tag 0 ncq 131072 in res 40/00:00:20:d4:66/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3: hard resetting link ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: both IDENTIFYs aborted, assuming NODEV ata3.00: revalidation failed (errno=-2) ata3: hard resetting link ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: configured for UDMA/133 ata3: EH complete sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x10 SAct 0x1 SErr 0x280100 action 0x6 frozen ata3.00: irq_stat 0x08000000, interface fatal error ata3: SError: { UnrecovData 10B8B BadCRC } ata3.00: cmd 60/00:00:30:12:67/01:00:1e:00:00/40 tag 0 ncq 131072 in res 40/00:00:30:12:67/00:00:1e:00:00/40 Emask 0x10 (ATA bus error) ata3.00: status: { DRDY } ata3: hard resetting link ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: both IDENTIFYs aborted, assuming NODEV ata3.00: revalidation failed (errno=-2) ata3: hard resetting link ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: configured for UDMA/133 ata3: EH complete sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x10 SAct 0x1 SErr 0x280100 action 0x6 frozen ata3.00: irq_stat 0x08000000, interface fatal error ata3: SError: { UnrecovData 10B8B BadCRC } ata3.00: cmd 60/00:00:30:17:67/01:00:1e:00:00/40 tag 0 ncq 131072 in res 40/00:00:30:17:67/00:00:1e:00:00/40 Emask 0x10 (ATA bus error) ata3.00: status: { DRDY } ata3: hard resetting link ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: both IDENTIFYs aborted, assuming NODEV ata3.00: revalidation failed (errno=-2) ata3: hard resetting link ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: configured for UDMA/133 ata3: EH complete sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3: limiting SATA link speed to 1.5 Gbps ata3.00: exception Emask 0x10 SAct 0x1 SErr 0x280100 action 0x6 frozen ata3.00: irq_stat 0x08000000, interface fatal error ata3: SError: { UnrecovData 10B8B BadCRC } ata3.00: cmd 60/00:00:30:19:67/01:00:1e:00:00/40 tag 0 ncq 131072 in res 40/00:00:30:19:67/00:00:1e:00:00/40 Emask 0x10 (ATA bus error) ata3.00: status: { DRDY } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: both IDENTIFYs aborted, assuming NODEV ata3.00: revalidation failed (errno=-2) ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/133 ata3: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t4 ata3: irq_stat 0x40000001 ata3: SError: { HostInt 10B8B } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100) ata3.00: revalidation failed (errno=-5) ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/133 ata3: exception Emask 0x50 SAct 0x0 SErr 0x80800 action 0x7 t3 ata3: irq_stat 0x08000002, interface fatal error ata3: SError: { HostInt 10B8B } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/133 ata3: EH complete sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x50 SAct 0x3 SErr 0x280900 action 0x6 frozen ata3.00: irq_stat 0x08000000, interface fatal error ata3: SError: { UnrecovData HostInt 10B8B BadCRC } ata3.00: cmd 60/00:00:30:19:67/01:00:1e:00:00/40 tag 0 ncq 131072 in res 40/00:08:30:1a:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3.00: cmd 60/00:08:30:1a:67/01:00:1e:00:00/40 tag 1 ncq 131072 in res 40/00:08:30:1a:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: both IDENTIFYs aborted, assuming NODEV ata3.00: revalidation failed (errno=-2) ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/133 ata3: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t4 ata3: irq_stat 0x40000001 ata3: SError: { HostInt 10B8B } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/133 ata3: EH complete sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x50 SAct 0x3 SErr 0x280900 action 0x6 frozen ata3.00: irq_stat 0x08000000, interface fatal error ata3: SError: { UnrecovData HostInt 10B8B BadCRC } ata3.00: cmd 60/00:00:30:1a:67/01:00:1e:00:00/40 tag 0 ncq 131072 in res 40/00:08:30:19:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3.00: cmd 60/00:08:30:19:67/01:00:1e:00:00/40 tag 1 ncq 131072 in res 40/00:08:30:19:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: both IDENTIFYs aborted, assuming NODEV ata3.00: revalidation failed (errno=-2) ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/133 ata3: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t4 ata3: irq_stat 0x40000001 ata3: SError: { HostInt 10B8B } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/133 ata3: EH complete sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: limiting speed to UDMA/100:PIO4 ata3.00: exception Emask 0x50 SAct 0x3 SErr 0x280900 action 0x6 frozen ata3.00: irq_stat 0x08000000, interface fatal error ata3: SError: { UnrecovData HostInt 10B8B BadCRC } ata3.00: cmd 60/00:00:30:19:67/01:00:1e:00:00/40 tag 0 ncq 131072 in res 40/00:08:30:1a:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3.00: cmd 60/00:08:30:1a:67/01:00:1e:00:00/40 tag 1 ncq 131072 in res 40/00:08:30:1a:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: both IDENTIFYs aborted, assuming NODEV ata3.00: revalidation failed (errno=-2) ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/100 ata3: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t4 ata3: irq_stat 0x40000001 ata3: SError: { HostInt 10B8B } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x50 SAct 0x3 SErr 0x280900 action 0x6 frozen ata3.00: irq_stat 0x08000000, interface fatal error ata3: SError: { UnrecovData HostInt 10B8B BadCRC } ata3.00: cmd 60/00:00:30:1a:67/01:00:1e:00:00/40 tag 0 ncq 131072 in res 40/00:08:30:19:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3.00: cmd 60/00:08:30:19:67/01:00:1e:00:00/40 tag 1 ncq 131072 in res 40/00:08:30:19:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: both IDENTIFYs aborted, assuming NODEV ata3.00: revalidation failed (errno=-2) ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/100 ata3: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t4 ata3: irq_stat 0x40000001 ata3: SError: { HostInt 10B8B } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: limiting speed to UDMA/33:PIO4 ata3.00: exception Emask 0x50 SAct 0x3 SErr 0x280900 action 0x6 frozen ata3.00: irq_stat 0x08000000, interface fatal error ata3: SError: { UnrecovData HostInt 10B8B BadCRC } ata3.00: cmd 60/00:00:30:19:67/01:00:1e:00:00/40 tag 0 ncq 131072 in res 40/00:08:30:1a:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3.00: cmd 60/00:08:30:1a:67/01:00:1e:00:00/40 tag 1 ncq 131072 in res 40/00:08:30:1a:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: both IDENTIFYs aborted, assuming NODEV ata3.00: revalidation failed (errno=-2) ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t4 ata3: irq_stat 0x40000001 ata3: SError: { HostInt 10B8B } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 1e 67 1a 30 sd 2:0:0:0: [sdc] Add. Sense: No additional sense information end_request: I/O error, dev sdc, sector 510073136 ata3: EH complete sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x50 SAct 0x3 SErr 0x280900 action 0x6 frozen ata3.00: irq_stat 0x08000000, interface fatal error ata3: SError: { UnrecovData HostInt 10B8B BadCRC } ata3.00: cmd 60/00:00:30:1a:67/01:00:1e:00:00/40 tag 0 ncq 131072 in res 40/00:08:30:19:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3.00: cmd 60/08:08:30:19:67/00:00:1e:00:00/40 tag 1 ncq 4096 in res 40/00:08:30:19:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: both IDENTIFYs aborted, assuming NODEV ata3.00: revalidation failed (errno=-2) ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t4 ata3: irq_stat 0x40000001 ata3: SError: { HostInt 10B8B } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100) ata3.00: revalidation failed (errno=-5) ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100) ata3.00: revalidation failed (errno=-5) ata3.00: limiting speed to UDMA/33:PIO3 ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: exception Emask 0x50 SAct 0x0 SErr 0x80800 action 0x7 t3 ata3: irq_stat 0x08000002, interface fatal error ata3: SError: { HostInt 10B8B } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 1e 67 19 30 sd 2:0:0:0: [sdc] Add. Sense: No additional sense information end_request: I/O error, dev sdc, sector 510073392 ata3: EH complete sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen ata3.00: irq_stat 0x08000000, interface fatal error ata3: SError: { UnrecovData HostInt 10B8B BadCRC } ata3.00: cmd 60/08:00:40:19:67/00:00:1e:00:00/40 tag 0 ncq 4096 in res 40/00:00:40:19:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: both IDENTIFYs aborted, assuming NODEV ata3.00: revalidation failed (errno=-2) ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t4 ata3: irq_stat 0x40000001 ata3: SError: { HostInt 10B8B } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen ata3.00: irq_stat 0x08000000, interface fatal error ata3: SError: { UnrecovData HostInt 10B8B BadCRC } ata3.00: cmd 60/08:00:48:19:67/00:00:1e:00:00/40 tag 0 ncq 4096 in res 40/00:00:48:19:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: both IDENTIFYs aborted, assuming NODEV ata3.00: revalidation failed (errno=-2) ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t4 ata3: irq_stat 0x40000001 ata3: SError: { HostInt 10B8B } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: qc timeout (cmd 0xec) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata3.00: revalidation failed (errno=-5) ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t3 ata3: SError: { HostInt 10B8B } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen ata3.00: irq_stat 0x08000000, interface fatal error ata3: SError: { UnrecovData HostInt 10B8B BadCRC } ata3.00: cmd 60/08:00:48:19:67/00:00:1e:00:00/40 tag 0 ncq 4096 in res 40/00:00:48:19:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error) ata3.00: status: { DRDY } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: both IDENTIFYs aborted, assuming NODEV ata3.00: revalidation failed (errno=-2) ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7 t4 ata3: irq_stat 0x40000001 ata3: SError: { HostInt 10B8B } ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: EH complete Soeren -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/