Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754609AbYLBMPC (ORCPT ); Tue, 2 Dec 2008 07:15:02 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751505AbYLBMOx (ORCPT ); Tue, 2 Dec 2008 07:14:53 -0500 Received: from ug-out-1314.google.com ([66.249.92.168]:58124 "EHLO ug-out-1314.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751233AbYLBMOt convert rfc822-to-8bit (ORCPT ); Tue, 2 Dec 2008 07:14:49 -0500 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=date:from:to:cc:subject:message-id:in-reply-to:references:x-mailer :mime-version:content-type:content-transfer-encoding; b=xHaZAiUowZTtLAyygASiRXiq25e5ooqhH9U87GS969wSMoMGKtoqungylLR1I81wpu ebZNU29LY7UfBQcx44ZQSPJmeu9e5XdUuqRCUtpYLXyTjERHkUWBW4SoRwJKQbWg+tTH hgRWBRDq6P2OlrStUx7aCVpaxBHAueqrpjuWA= Date: Tue, 2 Dec 2008 13:14:42 +0100 From: Alejandro Riveira =?UTF-8?B?RmVybsOhbmRleg==?= To: Linus Torvalds Cc: Linux Kernel Mailing List Subject: Re: Linux 2.6.28-rc7 Message-ID: <20081202131442.42e7df48@varda> In-Reply-To: References: X-Mailer: Claws Mail 3.5.0 (GTK+ 2.14.4; x86_64-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 38527 Lines: 612 El Mon, 1 Dec 2008 20:11:55 -0800 (PST) Linus Torvalds escribió: > > I was gone for a week, and it wasn't quite as quiet as I was hoping for, > but there's a new -rc out there now with the merges of the fallout. > > Almost all of it is various driver fixes, at least if you ignore the > (bulky) powerpc defconfig updates. The bulk being ACPI, DRM, input and > V4L, but with a smattering of usb, networking, infiniband and firewire. > > Oh, and a number of section warning fixes. > > The shortlog is about as informative as it gets - it's all about a lot of > small details. > > Linus > Just tried it on my Ubuntu 8.10 install. Booted fine and the distro got to its safe graphics mode because i'm evil and use the nvidia kernel module. i switch to VT1 and the fun begins something weird happens with the terminal... I can not see the login: not the password: promts I log in blindly When i type a command nothing appears on screen i have to hit enter twice one make the command appear the second actually executes After that i have to hit enter once more to get the shell promt again Also I couldn't use sudo the password promt did not get my password All of this happens without the nvidia module loaded (not even compiled) If i boot into single mode everything is ok 2.6.28-rc6-00007-ged31348 the first 28 series i tried does not have this problem [ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00 [ 0.000000] Linux version 2.6.28-rc7 (alex@varda) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #2 SMP PREEMPT Tue Dec 2 12:48:19 CET 2008 [ 0.000000] Command line: BOOT_IMAGE=(hd0,2)/vmlinuz-2.6.28-rc7 root=UUID=22b22080-8f07-4864-9b26-a62f2e8c96f7 ro single [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable) [ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffc0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffb0000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bffb0000 page 4k [ 0.000000] kernel direct mapping tables up to bffb0000 @ 10000-15000 [ 0.000000] last_map_addr: bffb0000 end: bffb0000 [ 0.000000] RAMDISK: 37ba2000 - 37fef76d [ 0.000000] ACPI: RSDP 000F90F0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT BFFB0000, 0040 (r1 A M I OEMRSDT 3000715 MSFT 97) [ 0.000000] ACPI: FACP BFFB0200, 0084 (r2 A M I OEMFACP 12000601 MSFT 97) [ 0.000000] ACPI: DSDT BFFB0440, 4B5A (r1 AM2ES AM2ES136 136 INTL 2002026) [ 0.000000] ACPI: FACS BFFC0000, 0040 [ 0.000000] ACPI: APIC BFFB0390, 0068 (r1 A M I OEMAPIC 3000715 MSFT 97) [ 0.000000] ACPI: MCFG BFFB0400, 003C (r1 A M I OEMMCFG 3000715 MSFT 97) [ 0.000000] ACPI: SSDT BFFB4FA0, 002B (r1 OEM_ID OEMTBLID 1 INTL 2002026) [ 0.000000] ACPI: OEMB BFFC0040, 0056 (r1 A M I AMI_OEM 3000715 MSFT 97) [ 0.000000] ACPI: HPET BFFB4FD0, 0038 (r1 A M I OEMHPET 3000715 MSFT 97) [ 0.000000] ACPI: SSDT BFFB5010, 01C4 (r1 A M I POWERNOW 1 AMD 1) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00bffb0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00005d2718] TEXT DATA BSS ==> [0000200000 - 00005d2718] [ 0.000000] #3 [0037ba2000 - 0037fef76d] RAMDISK ==> [0037ba2000 - 0037fef76d] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] [ffffe20000000000-ffffe200029fffff] PMD -> [ffff880001200000-ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bffb0 [ 0.000000] On node 0 totalpages: 786239 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1080 pages reserved [ 0.000000] DMA zone: 2847 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10695 pages used for memmap [ 0.000000] DMA32 zone: 771561 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 0, address 0xfec10000, GSI 24-44 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3f380000) [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 774408 [ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,2)/vmlinuz-2.6.28-rc7 root=UUID=22b22080-8f07-4864-9b26-a62f2e8c96f7 ro single [ 0.000000] Initializing CPU#0 [ 0.000000] Preemptible RCU implementation. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2000.010 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000999] Checking aperture... [ 0.000999] No AGP bridge found [ 0.000999] Node 0: aperture @ b56a000000 size 32 MB [ 0.000999] Aperture beyond 4GB. Ignoring. [ 0.000999] Memory: 3086548k/3145408k available (2146k kernel code, 452k absent, 57764k reserved, 1032k data, 328k init) [ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000999] hpet clockevent registered [ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.001009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.02 BogoMIPS (lpj=2000010) [ 0.001138] Mount-cache hash table entries: 256 [ 0.001319] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.001375] CPU: L2 Cache: 512K (64 bytes/line) [ 0.001428] tseg: 0000000000 [ 0.001435] CPU: Physical Processor ID: 0 [ 0.001487] CPU: Processor Core ID: 0 [ 0.001546] using C1E aware idle routine [ 0.001610] ACPI: Core revision 20080926 [ 0.007793] Setting APIC routing to flat [ 0.008556] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.018619] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.018997] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 3999.75 BogoMIPS (lpj=1999877) [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.089385] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.089897] Brought up 2 CPUs [ 0.089949] Total of 2 processors activated (7999.77 BogoMIPS). [ 0.090124] CPU0 attaching sched-domain: [ 0.090127] domain 0: span 0-1 level CPU [ 0.090129] groups: 0 1 [ 0.090133] CPU1 attaching sched-domain: [ 0.090135] domain 0: span 0-1 level CPU [ 0.090137] groups: 1 0 [ 0.090192] net_namespace: 1280 bytes [ 0.090272] NET: Registered protocol family 16 [ 0.090343] node 0 link 0: io port [1000, ffffff] [ 0.090343] TOM: 00000000c0000000 aka 3072M [ 0.090988] node 0 link 0: mmio [e0000000, efffffff] [ 0.090992] node 0 link 0: mmio [a0000, bffff] [ 0.090994] node 0 link 0: mmio [c0000000, ffffffff] [ 0.090997] bus: [00,ff] on node 0 link 0 [ 0.090999] bus: 00 index 0 io port: [0, ffff] [ 0.091001] bus: 00 index 1 mmio: [c0000000, fcffffffff] [ 0.091003] bus: 00 index 2 mmio: [a0000, bffff] [ 0.091009] ACPI: bus type pci registered [ 0.091070] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.091079] PCI: Not using MMCONFIG. [ 0.091131] PCI: Using configuration type 1 for base access [ 0.093665] ACPI: EC: Look up EC in DSDT [ 0.102499] ACPI: Interpreter enabled [ 0.102556] ACPI: (supports S0 S1 S3 S5) [ 0.102781] ACPI: Using IOAPIC for interrupt routing [ 0.102887] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.107417] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.117364] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.125095] ACPI: No dock devices found. [ 0.125207] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.126050] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.126106] pci 0000:00:01.0: PME# disabled [ 0.126183] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.126238] pci 0000:00:02.0: PME# disabled [ 0.126315] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.126370] pci 0000:00:03.0: PME# disabled [ 0.126446] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.126501] pci 0000:00:04.0: PME# disabled [ 0.126604] pci 0000:00:12.0: reg 10 io port: [0xc800-0xc8ff] [ 0.126609] pci 0000:00:12.0: reg 14 32bit mmio: [0xdbfefc00-0xdbfefcff] [ 0.126630] pci 0000:00:12.0: PME# supported from D3hot D3cold [ 0.126685] pci 0000:00:12.0: PME# disabled [ 0.126751] pci 0000:00:13.0: reg 10 32bit mmio: [0xdbfee000-0xdbfeefff] [ 0.126784] pci 0000:00:13.1: reg 10 32bit mmio: [0xdbfed000-0xdbfedfff] [ 0.126816] pci 0000:00:13.2: reg 10 32bit mmio: [0xdbfec000-0xdbfecfff] [ 0.126859] pci 0000:00:13.3: reg 10 32bit mmio: [0xdbfef800-0xdbfef8ff] [ 0.126882] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold [ 0.126983] pci 0000:00:13.3: PME# disabled [ 0.127064] pci 0000:00:14.0: reg 10 64bit mmio: [0xdbfd4000-0xdbfd7fff] [ 0.127084] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold [ 0.127140] pci 0000:00:14.0: PME# disabled [ 0.127279] pci 0000:00:15.1: quirk: region 4000-403f claimed by ali7101 ACPI [ 0.127375] pci 0000:00:16.0: reg 20 io port: [0xff00-0xff0f] [ 0.127408] pci 0000:00:16.1: reg 10 io port: [0xc400-0xc407] [ 0.127413] pci 0000:00:16.1: reg 14 io port: [0xc000-0xc003] [ 0.127418] pci 0000:00:16.1: reg 18 io port: [0xb800-0xb807] [ 0.127423] pci 0000:00:16.1: reg 1c io port: [0xb400-0xb403] [ 0.127428] pci 0000:00:16.1: reg 20 io port: [0xb000-0xb00f] [ 0.127433] pci 0000:00:16.1: reg 24 32bit mmio: [0xdbfef400-0xdbfef7ff] [ 0.127443] pci 0000:00:16.1: PME# supported from D3hot [ 0.127497] pci 0000:00:16.1: PME# disabled [ 0.127642] pci 0000:01:00.0: reg 10 32bit mmio: [0xdd000000-0xddffffff] [ 0.127650] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] [ 0.127658] pci 0000:01:00.0: reg 1c 64bit mmio: [0xdc000000-0xdcffffff] [ 0.127663] pci 0000:01:00.0: reg 24 io port: [0xd800-0xd87f] [ 0.127668] pci 0000:01:00.0: reg 30 32bit mmio: [0xdeee0000-0xdeefffff] [ 0.127697] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.127700] pci 0000:00:01.0: bridge 32bit mmio: [0xdc000000-0xdeefffff] [ 0.127704] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xcfffffff] [ 0.127726] pci 0000:00:02.0: bridge 32bit mmio pref: [0xdad00000-0xdadfffff] [ 0.127748] pci 0000:00:03.0: bridge 32bit mmio pref: [0xdae00000-0xdaefffff] [ 0.127770] pci 0000:00:04.0: bridge 32bit mmio pref: [0xdaf00000-0xdaffffff] [ 0.127810] pci 0000:05:0a.0: reg 10 32bit mmio: [0xdeffe000-0xdeffffff] [ 0.127870] pci 0000:05:0b.0: reg 10 io port: [0xe800-0xe8ff] [ 0.127877] pci 0000:05:0b.0: reg 14 32bit mmio: [0xdeffdc00-0xdeffdcff] [ 0.127899] pci 0000:05:0b.0: reg 30 32bit mmio: [0xdefc0000-0xdefdffff] [ 0.127908] pci 0000:05:0b.0: supports D1 D2 [ 0.127910] pci 0000:05:0b.0: PME# supported from D1 D2 D3hot D3cold [ 0.127983] pci 0000:05:0b.0: PME# disabled [ 0.128062] pci 0000:05:0c.0: reg 10 32bit mmio: [0xdeffc000-0xdeffcfff] [ 0.128094] pci 0000:05:0c.0: PME# supported from D0 D1 D3hot D3cold [ 0.128150] pci 0000:05:0c.0: PME# disabled [ 0.128228] pci 0000:05:0c.1: reg 10 32bit mmio: [0xdeff3000-0xdeff3fff] [ 0.128260] pci 0000:05:0c.1: PME# supported from D0 D1 D3hot D3cold [ 0.128316] pci 0000:05:0c.1: PME# disabled [ 0.128395] pci 0000:05:0c.2: reg 10 32bit mmio: [0xdeff2000-0xdeff2fff] [ 0.128426] pci 0000:05:0c.2: PME# supported from D0 D1 D3hot D3cold [ 0.128482] pci 0000:05:0c.2: PME# disabled [ 0.128566] pci 0000:05:0c.3: reg 10 32bit mmio: [0xdeffd800-0xdeffd8ff] [ 0.128598] pci 0000:05:0c.3: PME# supported from D0 D3hot D3cold [ 0.128654] pci 0000:05:0c.3: PME# disabled [ 0.128737] pci 0000:00:11.0: bridge io port: [0xe000-0xefff] [ 0.128740] pci 0000:00:11.0: bridge 32bit mmio: [0xdef00000-0xdeffffff] [ 0.128754] bus 00 -> node 0 [ 0.128760] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.128918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT] [ 0.129106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT] [ 0.129208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT] [ 0.129310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB3._PRT] [ 0.129412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB4._PRT] [ 0.141133] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.141840] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.142519] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.143236] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.143944] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.144640] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 *10 11 12 14 15) [ 0.145236] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.145981] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.146687] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.147272] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 52, should be 2D [20080926] [ 0.147272] SCSI subsystem initialized [ 0.147272] libata version 3.00 loaded. [ 0.148024] PCI: Using ACPI for IRQ routing [ 0.155096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.155312] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.157986] Switched to high resolution mode on CPU 0 [ 0.158321] Switched to high resolution mode on CPU 1 [ 0.166014] pnp: PnP ACPI init [ 0.166074] ACPI: bus type pnp registered [ 0.171132] pnp: PnP ACPI: found 15 devices [ 0.171186] ACPI: ACPI bus type pnp unregistered [ 0.171248] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.171304] system 00:07: ioport range 0x4000-0x40bf could not be reserved [ 0.171360] system 00:07: ioport range 0x40c0-0x40df has been reserved [ 0.171415] system 00:07: ioport range 0x400-0x40f has been reserved [ 0.171470] system 00:07: ioport range 0x480-0x48f has been reserved [ 0.171526] system 00:07: iomem range 0xfff80000-0xffffffff has been reserved [ 0.171582] system 00:07: iomem range 0xfec10000-0xfec10fff has been reserved [ 0.171638] system 00:07: iomem range 0xfe000000-0xfe0000ff has been reserved [ 0.171697] system 00:09: iomem range 0xff380000-0xffffffff could not be reserved [ 0.171760] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.171816] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.171875] system 00:0c: ioport range 0x290-0x29f has been reserved [ 0.171932] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.171991] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.172056] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.172112] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.176145] system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved [ 0.181340] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.181396] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.181451] pci 0000:00:01.0: MEM window: 0xdc000000-0xdeefffff [ 0.181507] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.181572] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.181626] pci 0000:00:02.0: IO window: disabled [ 0.181680] pci 0000:00:02.0: MEM window: disabled [ 0.181734] pci 0000:00:02.0: PREFETCH window: 0x000000dad00000-0x000000dadfffff [ 0.181799] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 [ 0.181853] pci 0000:00:03.0: IO window: disabled [ 0.181907] pci 0000:00:03.0: MEM window: disabled [ 0.181961] pci 0000:00:03.0: PREFETCH window: 0x000000dae00000-0x000000daefffff [ 0.182034] pci 0000:00:04.0: PCI bridge, secondary bus 0000:04 [ 0.182088] pci 0000:00:04.0: IO window: disabled [ 0.182142] pci 0000:00:04.0: MEM window: disabled [ 0.182196] pci 0000:00:04.0: PREFETCH window: 0x000000daf00000-0x000000daffffff [ 0.182262] pci 0000:00:11.0: PCI bridge, secondary bus 0000:05 [ 0.182317] pci 0000:00:11.0: IO window: 0xe000-0xefff [ 0.182372] pci 0000:00:11.0: MEM window: 0xdef00000-0xdeffffff [ 0.182428] pci 0000:00:11.0: PREFETCH window: disabled [ 0.182491] pci 0000:00:01.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29 [ 0.182548] pci 0000:00:01.0: setting latency timer to 64 [ 0.182554] pci 0000:00:02.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 [ 0.182610] pci 0000:00:02.0: setting latency timer to 64 [ 0.182615] pci 0000:00:03.0: PCI INT A -> GSI 39 (level, low) -> IRQ 39 [ 0.182671] pci 0000:00:03.0: setting latency timer to 64 [ 0.182677] pci 0000:00:04.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44 [ 0.182732] pci 0000:00:04.0: setting latency timer to 64 [ 0.182737] pci 0000:00:11.0: setting latency timer to 64 [ 0.182740] bus: 00 index 0 io port: [0x00-0xffff] [ 0.182794] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.182848] bus: 01 index 0 io port: [0xd000-0xdfff] [ 0.182902] bus: 01 index 1 mmio: [0xdc000000-0xdeefffff] [ 0.182955] bus: 01 index 2 mmio: [0xc0000000-0xcfffffff] [ 0.183017] bus: 01 index 3 mmio: [0x0-0x0] [ 0.183070] bus: 02 index 0 mmio: [0x0-0x0] [ 0.183123] bus: 02 index 1 mmio: [0x0-0x0] [ 0.183175] bus: 02 index 2 mmio: [0xdad00000-0xdadfffff] [ 0.183229] bus: 02 index 3 mmio: [0x0-0x0] [ 0.183282] bus: 03 index 0 mmio: [0x0-0x0] [ 0.183334] bus: 03 index 1 mmio: [0x0-0x0] [ 0.183387] bus: 03 index 2 mmio: [0xdae00000-0xdaefffff] [ 0.183440] bus: 03 index 3 mmio: [0x0-0x0] [ 0.183493] bus: 04 index 0 mmio: [0x0-0x0] [ 0.183546] bus: 04 index 1 mmio: [0x0-0x0] [ 0.183598] bus: 04 index 2 mmio: [0xdaf00000-0xdaffffff] [ 0.183652] bus: 04 index 3 mmio: [0x0-0x0] [ 0.183704] bus: 05 index 0 io port: [0xe000-0xefff] [ 0.183758] bus: 05 index 1 mmio: [0xdef00000-0xdeffffff] [ 0.183811] bus: 05 index 2 mmio: [0x0-0x0] [ 0.183864] bus: 05 index 3 mmio: [0x0-0x0] [ 0.183928] NET: Registered protocol family 2 [ 0.217067] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.218166] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.220833] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.221543] TCP: Hash tables configured (established 262144 bind 65536) [ 0.221600] TCP reno registered [ 0.233192] checking if image is initramfs... it is [ 0.569057] Freeing initrd memory: 4405k freed [ 0.576637] msgmni has been set to 6038 [ 0.576811] io scheduler noop registered [ 0.576864] io scheduler anticipatory registered (default) [ 0.576929] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.576997] pci 0000:00:01.0: Enabling HT MSI Mapping [ 0.577070] pci 0000:00:02.0: Enabling HT MSI Mapping [ 0.577133] pci 0000:00:03.0: Enabling HT MSI Mapping [ 0.577196] pci 0000:00:04.0: Enabling HT MSI Mapping [ 0.610072] pci 0000:01:00.0: Boot video device [ 0.614749] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.614772] pcieport-driver 0000:00:01.0: found MSI capability [ 0.614842] pcieport-driver 0000:00:01.0: irq 319 for MSI/MSI-X [ 0.614849] pci_express 0000:00:01.0:pcie00: allocate port service [ 0.614890] pci_express 0000:00:01.0:pcie01: allocate port service [ 0.614927] pci_express 0000:00:01.0:pcie03: allocate port service [ 0.614995] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 0.615025] pcieport-driver 0000:00:02.0: found MSI capability [ 0.615090] pcieport-driver 0000:00:02.0: irq 318 for MSI/MSI-X [ 0.615097] pci_express 0000:00:02.0:pcie00: allocate port service [ 0.615136] pci_express 0000:00:02.0:pcie01: allocate port service [ 0.615173] pci_express 0000:00:02.0:pcie03: allocate port service [ 0.615240] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 0.615262] pcieport-driver 0000:00:03.0: found MSI capability [ 0.615326] pcieport-driver 0000:00:03.0: irq 317 for MSI/MSI-X [ 0.615333] pci_express 0000:00:03.0:pcie00: allocate port service [ 0.615373] pci_express 0000:00:03.0:pcie01: allocate port service [ 0.615410] pci_express 0000:00:03.0:pcie03: allocate port service [ 0.615476] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 0.615497] pcieport-driver 0000:00:04.0: found MSI capability [ 0.615562] pcieport-driver 0000:00:04.0: irq 316 for MSI/MSI-X [ 0.615569] pci_express 0000:00:04.0:pcie00: allocate port service [ 0.615605] pci_express 0000:00:04.0:pcie01: allocate port service [ 0.615642] pci_express 0000:00:04.0:pcie03: allocate port service [ 0.618226] aer 0000:00:01.0:pcie01: service driver aer loaded [ 0.620682] aer 0000:00:02.0:pcie01: service driver aer loaded [ 0.623155] aer 0000:00:03.0:pcie01: service driver aer loaded [ 0.625622] aer 0000:00:04.0:pcie01: service driver aer loaded [ 0.629189] Linux agpgart interface v0.103 [ 0.630969] brd: module loaded [ 0.631079] Driver 'sd' needs updating - please use bus_type methods [ 0.631201] ahci 0000:00:16.1: version 3.0 [ 0.631216] ahci 0000:00:16.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.631363] ahci 0000:00:16.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.631427] ahci 0000:00:16.1: flags: ncq sntf ilck pm led clo pmp pio slum part [ 0.631940] scsi0 : ahci [ 0.632178] scsi1 : ahci [ 0.632341] scsi2 : ahci [ 0.632500] scsi3 : ahci [ 0.632696] ata1: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef500 irq 21 [ 0.632760] ata2: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef580 irq 21 [ 0.632824] ata3: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef600 irq 21 [ 0.632888] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 21 [ 0.937022] ata1: SATA link down (SStatus 0 SControl 300) [ 1.253020] ata2: SATA link down (SStatus 0 SControl 300) [ 1.569022] ata3: SATA link down (SStatus 0 SControl 300) [ 2.467041] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.508760] ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 [ 2.508816] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.567080] ata4.00: configured for UDMA/133 [ 2.578046] isa bounce pool size: 16 pages [ 2.578152] scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 2.578427] sd 3:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 2.578502] sd 3:0:0:0: [sda] Write Protect is off [ 2.578556] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.578576] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.578703] sd 3:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 2.578777] sd 3:0:0:0: [sda] Write Protect is off [ 2.578830] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.578849] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.578914] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 2.637604] sd 3:0:0:0: [sda] Attached SCSI disk [ 2.637791] pata_ali 0000:00:16.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.637983] scsi4 : pata_ali [ 2.638159] scsi5 : pata_ali [ 2.639978] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.640034] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.793518] ata5.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 [ 2.793573] ata5.01: 160086528 sectors, multi 16: LBA [ 2.799459] ata5.01: configured for UDMA/133 [ 2.964367] ata6.00: ATAPI: _NEC DVD_RW ND-3540A, 1.01, max UDMA/33 [ 2.964437] ata6.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled [ 2.964501] ata6.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 2.970324] ata6.00: configured for UDMA/33 [ 2.981080] scsi 4:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 [ 2.981328] sd 4:0:1:0: [sdb] 160086528 512-byte hardware sectors: (81.9 GB/76.3 GiB) [ 2.981403] sd 4:0:1:0: [sdb] Write Protect is off [ 2.981457] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.981477] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.981609] sd 4:0:1:0: [sdb] 160086528 512-byte hardware sectors: (81.9 GB/76.3 GiB) [ 2.981682] sd 4:0:1:0: [sdb] Write Protect is off [ 2.981735] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.981754] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.981819] sdb: sdb1 sdb2 sdb3 [ 2.984267] sd 4:0:1:0: [sdb] Attached SCSI disk [ 2.985760] scsi 5:0:0:0: CD-ROM _NEC DVD_RW ND-3540A 1.01 PQ: 0 ANSI: 5 [ 2.986114] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.986170] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.986681] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.986855] mice: PS/2 mouse device common for all mice [ 2.987032] rtc_cmos 00:02: RTC can wake from S4 [ 2.987147] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.987230] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 2.987334] cpuidle: using governor ladder [ 2.987387] cpuidle: using governor menu [ 2.987902] TCP cubic registered [ 2.988089] registered taskstats version 1 [ 2.988333] rtc_cmos 00:02: setting system clock to 2008-12-02 12:59:38 UTC (1228222778) [ 2.988431] Freeing unused kernel memory: 328k freed [ 2.988658] Write protecting the kernel read-only data: 2948k [ 3.005825] NET: Registered protocol family 1 [ 3.016754] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.082720] fuse init (API version 7.10) [ 3.092525] ACPI: duty_cycle spans bit 4 [ 3.092654] processor ACPI_CPU:00: registered as cooling_device0 [ 3.092770] processor ACPI_CPU:01: registered as cooling_device1 [ 3.216807] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.216887] r8169 0000:05:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.216983] r8169 0000:05:0b.0: no PCI Express capability [ 3.217331] eth0: RTL8110s at 0xffffc200100e2c00, 00:4f:63:00:a4:73, XID 04000000 IRQ 19 [ 3.223308] usbcore: registered new interface driver usbfs [ 3.223397] usbcore: registered new interface driver hub [ 3.223486] usbcore: registered new device driver usb [ 3.225487] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.225572] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.225657] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 3.225758] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 3.225857] ohci_hcd 0000:00:13.0: irq 17, io mem 0xdbfee000 [ 3.228114] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.228171] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 3.250426] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 3.250511] sd 4:0:1:0: Attached scsi generic sg1 type 0 [ 3.250589] scsi 5:0:0:0: Attached scsi generic sg2 type 5 [ 3.279126] usb usb1: configuration #1 chosen from 1 choice [ 3.279216] hub 1-0:1.0: USB hub found [ 3.279277] hub 1-0:1.0: 3 ports detected [ 3.279470] ehci_hcd 0000:00:13.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3.279560] ehci_hcd 0000:00:13.3: EHCI Host Controller [ 3.279641] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 2 [ 3.301033] ehci_hcd 0000:00:13.3: debug port 1 [ 3.301124] ehci_hcd 0000:00:13.3: irq 23, io mem 0xdbfef800 [ 3.307024] ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00 [ 3.307179] usb usb2: configuration #1 chosen from 1 choice [ 3.307261] hub 2-0:1.0: USB hub found [ 3.307323] hub 2-0:1.0: 8 ports detected [ 3.307520] ehci_hcd 0000:05:0c.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3.307609] ehci_hcd 0000:05:0c.3: EHCI Host Controller [ 3.307693] ehci_hcd 0000:05:0c.3: new USB bus registered, assigned bus number 3 [ 3.307811] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 3.307875] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 3.307953] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4 [ 3.308091] ohci_hcd 0000:00:13.1: irq 18, io mem 0xdbfed000 [ 3.324306] Driver 'sr' needs updating - please use bus_type methods [ 3.329050] ehci_hcd 0000:05:0c.3: debug port 1 [ 3.329141] ehci_hcd 0000:05:0c.3: irq 20, io mem 0xdeffd800 [ 3.331725] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 3.331786] Uniform CD-ROM driver Revision: 3.20 [ 3.331943] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 3.337070] ehci_hcd 0000:05:0c.3: USB 2.0 started, EHCI 1.00 [ 3.337229] usb usb3: configuration #1 chosen from 1 choice [ 3.337311] hub 3-0:1.0: USB hub found [ 3.337371] hub 3-0:1.0: 6 ports detected [ 3.361136] usb usb4: configuration #1 chosen from 1 choice [ 3.361223] hub 4-0:1.0: USB hub found [ 3.361284] hub 4-0:1.0: 3 ports detected [ 3.361450] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 3.361542] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 3.361626] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 5 [ 3.361728] ohci_hcd 0000:00:13.2: irq 19, io mem 0xdbfec000 [ 3.415112] usb usb5: configuration #1 chosen from 1 choice [ 3.415201] hub 5-0:1.0: USB hub found [ 3.415261] hub 5-0:1.0: 3 ports detected [ 3.415431] ohci_hcd 0000:05:0c.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 3.415511] ohci_hcd 0000:05:0c.0: OHCI Host Controller [ 3.415593] ohci_hcd 0000:05:0c.0: new USB bus registered, assigned bus number 6 [ 3.415678] ohci_hcd 0000:05:0c.0: irq 21, io mem 0xdeffc000 [ 3.468113] usb usb6: configuration #1 chosen from 1 choice [ 3.468208] hub 6-0:1.0: USB hub found [ 3.468268] hub 6-0:1.0: 2 ports detected [ 3.468435] ohci_hcd 0000:05:0c.1: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 3.468514] ohci_hcd 0000:05:0c.1: OHCI Host Controller [ 3.468591] ohci_hcd 0000:05:0c.1: new USB bus registered, assigned bus number 7 [ 3.468692] ohci_hcd 0000:05:0c.1: irq 22, io mem 0xdeff3000 [ 3.521093] usb usb7: configuration #1 chosen from 1 choice [ 3.521173] hub 7-0:1.0: USB hub found [ 3.521233] hub 7-0:1.0: 2 ports detected [ 3.521389] ohci_hcd 0000:05:0c.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3.521459] ohci_hcd 0000:05:0c.2: OHCI Host Controller [ 3.521534] ohci_hcd 0000:05:0c.2: new USB bus registered, assigned bus number 8 [ 3.521614] ohci_hcd 0000:05:0c.2: irq 23, io mem 0xdeff2000 [ 3.574112] usb usb8: configuration #1 chosen from 1 choice [ 3.574196] hub 8-0:1.0: USB hub found [ 3.574256] hub 8-0:1.0: 2 ports detected [ 3.658729] EXT3-fs: INFO: recovery required on readonly filesystem. [ 3.658786] EXT3-fs: write access will be enabled during recovery. [ 3.729385] kjournald starting. Commit interval 5 seconds [ 3.729399] EXT3-fs: recovery complete. [ 3.729845] EXT3-fs: mounted filesystem with ordered data mode. [ 3.877029] usb 1-2: new low speed USB device using ohci_hcd and address 2 [ 4.024112] usb 1-2: configuration #1 chosen from 1 choice [ 4.250020] usb 5-2: new full speed USB device using ohci_hcd and address 2 [ 4.415112] usb 5-2: configuration #1 chosen from 1 choice [ 8.965997] udevd version 124 started [ 9.130213] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 9.130324] uli526x 0000:00:12.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 9.152551] eth1: ULi M5263 at pci0000:00:12.0, 00:13:8f:b3:14:a4, irq 20. [ 9.174929] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 9.182281] ACPI: Power Button (FF) [PWRF] [ 9.182451] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 9.190275] ACPI: Power Button (CM) [PWRB] [ 9.193299] cfg80211: Calling CRDA to update world regulatory domain [ 9.267773] rt2500pci 0000:05:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 9.281810] phy0: Selected rate control algorithm 'minstrel' [ 9.310100] parport_pc 00:05: reported by Plug and Play ACPI [ 9.310208] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 9.377576] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 9.377744] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 9.399421] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 9.409917] Registered led device: rt2500pci-phy0:radio [ 9.422525] usbcore: registered new interface driver hiddev [ 9.428362] input: KYE NetScroll+ Traveler as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input3 [ 9.436413] generic-usb 0003:0458:002E.0001: input,hidraw0: USB HID v1.10 Mouse [KYE NetScroll+ Traveler] on usb-0000:00:13.0-2/input0 [ 9.436518] usbcore: registered new interface driver usbhid [ 9.436574] usbhid: v2.6:USB HID core driver [ 9.452151] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1904 [ 9.452246] usbcore: registered new interface driver usblp [ 9.563872] ali15x3_smbus 0000:00:15.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr [ 9.563943] ali15x3_smbus 0000:00:15.1: ALI15X3 not detected, module not inserted. [ 9.576530] ali1535_smbus 0000:00:15.1: ALI1535_smb region uninitialized - upgrade BIOS? [ 9.576598] ali1535_smbus 0000:00:15.1: ALI1535 not detected, module not inserted. [ 9.581271] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 10.163408] HDA Intel 0000:00:14.0: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 10.173184] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 10.884035] lp0: using parport0 (interrupt-driven). [ 10.912954] w83627ehf: Found W83627EHG chip at 0x290 [ 11.146354] Adding 1020116k swap on /dev/sdb2. Priority:1 extents:1 across:1020116k [ 11.378979] EXT3 FS on sda3, internal journal [ 15.926364] kjournald starting. Commit interval 5 seconds [ 15.926923] EXT3 FS on sda2, internal journal [ 15.926929] EXT3-fs: mounted filesystem with ordered data mode. [ 15.954559] JFS: nTxBlock = 8192, nTxLock = 65536 [ 16.362700] ip_tables: (C) 2000-2006 Netfilter Core Team [ 17.276851] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 17.278129] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 17.278132] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 17.278135] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 101.744347] nvidia: module license 'NVIDIA' taints kernel. [ 102.003828] nvidia 0000:01:00.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25 [ 102.003838] nvidia 0000:01:00.0: setting latency timer to 64 [ 102.004747] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.06 Sat Nov 8 17:50:38 PST 2008 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/