Subject: Re: bnx2: fs_sync_timeout, reset code = 1020002
From: "Michael Chan" <mchan@broadcom.com>
To: "Pavel Machek" <pavel@suse.cz>
cc: "kernel list" <linux-kernel@vger.kernel.org>,
       "Benjamin Li" <benli@broadcom.com>
In-Reply-To: <20081208145442.GA23820@atrey.karlin.mff.cuni.cz>
References: <20081204105550.GA2429@elf.ucw.cz>
 <1228411378.9156.52.camel@HP1>
 <20081208145442.GA23820@atrey.karlin.mff.cuni.cz>
Date: Mon, 08 Dec 2008 09:12:25 -0800
Message-ID: <1228756345.11235.2.camel@HP1>
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1029
Lines: 36


On Mon, 2008-12-08 at 06:54 -0800, Pavel Machek wrote:
> > 
> > On Thu, 2008-12-04 at 02:55 -0800, Pavel Machek wrote:
> > > Hi!
> > > 
> > > I'm getting `subj` (with different numbers, 1020002, 1020004,
> > > sometimes 102006). ifconfig eth0 up fails, network is completely
> > > broken.
> > 
> > Which kernel are you using?  If it used to work before 2.6.26 or so,
> > it
> 
> I'm using 2.6.28-rc7. I did not try any previous kernels.

Please provide ethtool -i eth0

and lspci -xxx on the Broadcom device.

Thanks.

> 
> > may be because of the PCI VPD access going beyond the size limit.  We
> > should have a PCI quirk to prevent this, but may be it is not
> > complete.
> 
> I could not find quirk handling, so I enabled the debug and workaround
> options I could find...
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/