Subject: Re: bnx2: fs_sync_timeout, reset code = 1020002
From: "Michael Chan" <mchan@broadcom.com>
To: "Pavel Machek" <pavel@suse.cz>
cc: "kernel list" <linux-kernel@vger.kernel.org>,
       "Benjamin Li" <benli@broadcom.com>
In-Reply-To: <20081210075624.GC20166@elf.ucw.cz>
References: <20081204105550.GA2429@elf.ucw.cz>
 <1228411378.9156.52.camel@HP1>
 <20081208145442.GA23820@atrey.karlin.mff.cuni.cz>
 <1228756345.11235.2.camel@HP1> <20081210075624.GC20166@elf.ucw.cz>
Date: Wed, 10 Dec 2008 16:46:35 -0800
Message-ID: <1228956395.9582.50.camel@HP1>
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 751
Lines: 22


On Tue, 2008-12-09 at 23:56 -0800, Pavel Machek wrote:
> On Mon 2008-12-08 09:12:25, Michael Chan wrote:
> > 
> > Please provide ethtool -i eth0
> > 
> > and lspci -xxx on the Broadcom device.
> 
> Attached. It actually has eth0 & eth1, both seem to be same broadcom...
> 

It looks like the chip is bad or the firmware is bad.  The PCI revision
ID and the serial number are all zeros.  Perhaps we can try to reprogram
the NVRAM or do further diagnostics tests.  I'll have someone contact
you.  Thanks.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/