Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752022AbYLOMwq (ORCPT ); Mon, 15 Dec 2008 07:52:46 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750861AbYLOMwf (ORCPT ); Mon, 15 Dec 2008 07:52:35 -0500 Received: from ppsw-6.csi.cam.ac.uk ([131.111.8.136]:44951 "EHLO ppsw-6.csi.cam.ac.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750761AbYLOMwf (ORCPT ); Mon, 15 Dec 2008 07:52:35 -0500 X-Cam-AntiVirus: no malware found X-Cam-SpamDetails: not scanned X-Cam-ScannerInfo: http://www.cam.ac.uk/cs/email/scanner/ Message-ID: <49465315.2070708@cam.ac.uk> Date: Mon, 15 Dec 2008 12:52:37 +0000 From: Jonathan Cameron User-Agent: Thunderbird 2.0.0.16 (X11/20080801) MIME-Version: 1.0 To: Mark Brown CC: Mike Rapoport , LKML , felipe.balbi@nokia.com, Liam Girdwood Subject: Re: [PATCH] mfd: DA9030 USB charge pump mode selection support References: <4943FA3E.9090507@cam.ac.uk> <49461CFB.9080108@compulab.co.il> <20081215104730.GA31145@sirena.org.uk> In-Reply-To: <20081215104730.GA31145@sirena.org.uk> X-Enigmail-Version: 0.95.6 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2650 Lines: 93 From: Jonathan Cameron Add support for changing the mode of the da9030 usb charge pump Signed-off-by: Jonathan Cameron -- This version simply adds the functionality to the da903x mfd driver core. If anyone can suggest a way round simply maintaining a global pointer to the device it would be good. To be able to call this from a board config file the driver must be built in rather than a module but enforcing that is down to the board Kconfig entry. diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c index 0b5bd85..600e884 100644 --- a/drivers/mfd/da903x.c +++ b/drivers/mfd/da903x.c @@ -472,6 +472,32 @@ failed: return ret; } +/* Single device assumption */ +struct device *da9030_mfd_dev; + +int da9030_set_usb_charge_pump_mode(int mode) +{ + uint8_t val = 0; + + if (da9030_mfd_dev == NULL) + return -EINVAL; + + switch (mode) { + case DA9030_USBPUMP_AUTO: + val = 0; + break; + case DA9030_USBPUMP_CHARGE_PUMP: + val = 0x40; + break; + case DA9030_USBPUMP_CURRENT_SOURCE: + val = 0x80; + break; + } + + return da903x_write(da9030_mfd_dev, DA9030_USBPUMP_REG, val); +} +EXPORT_SYMBOL_GPL(da9030_set_usb_charge_pump_mode); + static int __devinit da903x_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -487,6 +513,7 @@ static int __devinit da903x_probe(struct i2c_client *client, chip->client = client; chip->dev = &client->dev; chip->ops = &da903x_ops[id->driver_data]; + da9030_mfd_dev = &client->dev; mutex_init(&chip->lock); INIT_WORK(&chip->irq_work, da903x_irq_work); @@ -547,6 +574,7 @@ static struct i2c_driver da903x_driver = { static int __init da903x_init(void) { + da9030_mfd_dev = NULL; return i2c_add_driver(&da903x_driver); } module_init(da903x_init); diff --git a/include/linux/mfd/da903x.h b/include/linux/mfd/da903x.h index cad314c..0f12331 100644 --- a/include/linux/mfd/da903x.h +++ b/include/linux/mfd/da903x.h @@ -189,6 +190,13 @@ extern int da903x_unregister_notifier(struct device *dev, extern int da903x_query_status(struct device *dev, unsigned int status); +#define DA9030_USBPUMP_AUTO 1 +#define DA9030_USBPUMP_CHARGE_PUMP 2 +#define DA9030_USBPUMP_CURRENT_SOURCE 3 + +#define DA9030_USBPUMP_REG 0x19 + +int da9030_set_usb_charge_pump_mode(int mode); /* NOTE: the two functions below are not intended for use outside * of the DA9034 sub-device drivers -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/