Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754154AbYLSHJr (ORCPT ); Fri, 19 Dec 2008 02:09:47 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752049AbYLSHJf (ORCPT ); Fri, 19 Dec 2008 02:09:35 -0500 Received: from rv-out-0506.google.com ([209.85.198.224]:41363 "EHLO rv-out-0506.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751355AbYLSHJc (ORCPT ); Fri, 19 Dec 2008 02:09:32 -0500 Message-ID: <494B48A5.70207@gawab.com> Date: Thu, 18 Dec 2008 23:09:25 -0800 From: Justin Madru User-Agent: Thunderbird 2.0.0.18 (X11/20081205) MIME-Version: 1.0 To: Alan Cox CC: Andrew Morton , lkml , linux-ide@vger.kernel.org, "Rafael J. Wysocki" , Jeff Garzik Subject: Re: [2.6.28-rc] Sata soft reset filling log References: <494318F5.4060007@gawab.com> <20081216210251.138d3e98.akpm@linux-foundation.org> <20081217101307.4614145d@lxorguk.ukuu.org.uk> In-Reply-To: <20081217101307.4614145d@lxorguk.ukuu.org.uk> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 29867 Lines: 650 Alan Cox wrote: > On Tue, 16 Dec 2008 21:02:51 -0800 > Andrew Morton wrote: > > >> (cc linux-ide). >> >> This is a post-2.6.27 regression. Panic! >> >> On Fri, 12 Dec 2008 18:07:49 -0800 Justin Madru wrote: >> >> >>> I've been testing .28 (currently -rc8) and I've noticed in the logs a >>> massive amount of the following. >>> I can confirm that the messages doesn't appear when booting into a .27 >>> kernel. >>> >>> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >>> ata2.00: ST_FIRST: !(DRQ|ERR|DF) >>> > > Which is the first 2.6.28-rc that this appears ? > > I did some basic testing to find out what -rc it first appears in, and it _could_ be before -rc3. I first noticed it after -rc6 because of another issue that made me look into the logs. So, currently I don't know exactly when it started (haven't bisected). The problem is that the sata-reset messages don't appear immediately after boot. They happen about say 10 after boot, then appear sporadically, but sometimes very frequently. I've tried to trigger the error, but have been unable to determine any relation. Henceforth, a bisect would be hard. To reply to Jeff: Yes, the ata_piix module is loaded. I do have a DVD/CD drive that should be on the same controller as the hard drive (TSSTcorpCD-RW/DVD-ROM TSL462D) (is there a command to run to show drives connected to a controller?) below is the dmesg, and more info about my computer (ie. config / hardware) can be found at: http://jdserver.homelinux.org/bugreports/ BIOS EBDA/lowmem at: 0009f000/0009f000 Linux version 2.6.28-rc8-git (root@dell-laptop) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP PREEMPT Wed Dec 10 21:59:30 PST 2008 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC PAT WC disabled due to known CPU erratum. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000003f6d3400 (usable) BIOS-e820: 000000003f6d3400 - 0000000040000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x3f6d3 max_arch_pfn = 0x100000 kernel direct mapping tables up to 377fe000 @ 7000-d000 RAMDISK: 37bbc000 - 37fefac2 Allocated new RAMDISK: 0055e000 - 00991ac2 Move RAMDISK from 0000000037bbc000 - 0000000037fefac1 to 0055e000 - 00991ac1 ACPI: RSDP 000FC1D0, 0014 (r0 DELL ) ACPI: RSDT 3F6D39CD, 0040 (r1 DELL M07 27D7060D ASL 61) ACPI: FACP 3F6D4800, 0074 (r1 DELL M07 27D7060D ASL 61) ACPI: DSDT 3F6D5400, 4766 (r1 INT430 SYSFexxx 1001 INTL 20050624) ACPI: FACS 3F6E3C00, 0040 ACPI: HPET 3F6D4F00, 0038 (r1 DELL M07 1 ASL 61) ACPI: APIC 3F6D5000, 0068 (r1 DELL M07 27D7060D ASL 47) ACPI: MCFG 3F6D4FC0, 003E (r16 DELL M07 27D7060D ASL 61) ACPI: SLIC 3F6D509C, 0024 (r1 DELL M07 27D7060D ASL 61) ACPI: BOOT 3F6D4BC0, 0028 (r1 DELL M07 27D7060D ASL 61) ACPI: SSDT 3F6D3A0D, 04DC (r1 PmRef CpuPm 3000 INTL 20050624) ACPI: Local APIC address 0xfee00000 126MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00009000 - 0000ff00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 000055ae30] TEXT DATA BSS ==> [0000100000 - 000055ae30] #4 [000055b000 - 000055e000] INIT_PG_TABLE ==> [000055b000 - 000055e000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [000055e000 - 0000991ac2] NEW RAMDISK ==> [000055e000 - 0000991ac2] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] Reserving 64MB of memory at 16MB for crashkernel (System RAM: 1014MB) Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0003f6d3 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003f6d3 On node 0 totalpages: 259698 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 254 pages used for memmap HighMem zone: 32215 pages, LIFO batch:7 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) PERCPU: Allocating 36864 bytes of per cpu data NR_CPUS: 4, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257668 Kernel command line: root=UUID=5e751884-8e64-408f-ba3c-621be1d61cc6 ro splash rootflags=data=writeback crashkernel=384M-2G:64M@16M,2G-:128M@16M Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. CPU 0 irqstacks, hard=c04f6000 soft=c04f2000 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 1729.308 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 954952k/1039180k available (2649k kernel code, 83552k reserved, 1063k data, 296k init, 129876k highmem) virtual kernel memory layout: fixmap : 0xfff85000 - 0xfffff000 ( 488 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc04a5000 - 0xc04ef000 ( 296 kB) .data : 0xc0396637 - 0xc04a028c (1063 kB) .text : 0xc0100000 - 0xc0396637 (2649 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3460.72 BogoMIPS (lpj=5764360) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080926 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c CPU 1 irqstacks, hard=c04f7000 soft=c04f3000 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3459.13 BogoMIPS (lpj=5763409) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c checking TSC synchronization [CPU#0 -> CPU#1]: Measured 3498706146 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (6919.85 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 540 bytes regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0xeff00000-0xeff7ffff] pci 0000:00:02.0: reg 14 io port: [0xeff8-0xefff] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 1c 32bit mmio: [0xefec0000-0xefefffff] pci 0000:00:02.1: reg 10 32bit mmio: [0xeff80000-0xefffffff] pci 0000:00:1b.0: reg 10 64bit mmio: [0xefebc000-0xefebffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f] pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f] pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f] pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80000-0xffa803ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:1f.2: reg 18 io port: [0x170-0x177] pci 0000:00:1f.2: reg 1c io port: [0x374-0x377] pci 0000:00:1f.2: reg 20 io port: [0xbfa0-0xbfaf] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] pci 0000:0b:00.0: reg 10 32bit mmio: [0xefdff000-0xefdfffff] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold pci 0000:0b:00.0: PME# disabled pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.0: bridge 32bit mmio: [0xefd00000-0xefdfffff] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.3: bridge 32bit mmio: [0xefa00000-0xefcfffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe01fffff] pci 0000:03:00.0: reg 10 32bit mmio: [0xef9fe000-0xef9fffff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:03:01.0: reg 10 32bit mmio: [0xef9fd800-0xef9fdfff] pci 0000:03:01.0: supports D1 D2 pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.0: PME# disabled pci 0000:03:01.1: reg 10 32bit mmio: [0xef9fd500-0xef9fd5ff] pci 0000:03:01.1: supports D1 D2 pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.1: PME# disabled pci 0000:03:01.2: reg 10 32bit mmio: [0xef9fd600-0xef9fd6ff] pci 0000:03:01.2: supports D1 D2 pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.2: PME# disabled pci 0000:03:01.3: reg 10 32bit mmio: [0xef9fd700-0xef9fd7ff] pci 0000:03:01.3: supports D1 D2 pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.3: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xef900000-0xef9fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing cfg80211: Calling CRDA to update world regulatory domain cfg80211: Failed calling CRDA cfg80211: calling CRDA failed - unable to update world regulatory domain, using static definition hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:03: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9fbff could not be reserved system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xcffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x3f6d33ff could not be reserved system 00:00: iomem range 0x3f6d3400-0x3f6fffff has been reserved system 00:00: iomem range 0x3f700000-0x3f7fffff has been reserved system 00:00: iomem range 0x3f700000-0x3fefffff could not be reserved system 00:00: iomem range 0xffb00000-0xffffffff has been reserved system 00:00: iomem range 0xfec00000-0xfec0ffff has been reserved system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved system 00:00: iomem range 0xfed20000-0xfed9ffff has been reserved system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved system 00:00: iomem range 0xf4000000-0xf4003fff has been reserved system 00:00: iomem range 0xf4004000-0xf4004fff has been reserved system 00:00: iomem range 0xf4005000-0xf4005fff has been reserved system 00:00: iomem range 0xf4006000-0xf4006fff has been reserved system 00:00: iomem range 0xf4008000-0xf400bfff has been reserved system 00:00: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:03: ioport range 0xf400-0xf4fe has been reserved system 00:03: ioport range 0x1080-0x10bf has been reserved system 00:03: ioport range 0x10c0-0x10df has been reserved system 00:03: ioport range 0x809-0x809 has been reserved system 00:08: ioport range 0xc80-0xcff could not be reserved system 00:08: ioport range 0x910-0x91f has been reserved system 00:08: ioport range 0x920-0x92f has been reserved system 00:08: ioport range 0xcb0-0xcbf has been reserved system 00:08: ioport range 0x930-0x97f has been reserved system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xefd00000-0xefdfffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.3: IO window: 0xd000-0xdfff pci 0000:00:1c.3: MEM window: 0xefa00000-0xefcfffff pci 0000:00:1c.3: PREFETCH window: 0x000000e0000000-0x000000e01fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xef900000-0xef9fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffff] bus: 0b index 0 mmio: [0x0-0x0] bus: 0b index 1 mmio: [0xefd00000-0xefdfffff] bus: 0b index 2 mmio: [0x0-0x0] bus: 0b index 3 mmio: [0x0-0x0] bus: 0c index 0 io port: [0xd000-0xdfff] bus: 0c index 1 mmio: [0xefa00000-0xefcfffff] bus: 0c index 2 mmio: [0xe0000000-0xe01fffff] bus: 0c index 3 mmio: [0x0-0x0] bus: 03 index 0 mmio: [0x0-0x0] bus: 03 index 1 mmio: [0xef900000-0xef9fffff] bus: 03 index 2 mmio: [0x0-0x0] bus: 03 index 3 io port: [0x00-0xffff] bus: 03 index 4 mmio: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 4302k freed Simple Boot Flag at 0x79 set to 0x1 highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages msgmni has been set to 1620 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pcieport-driver 0000:00:1c.0: irq 383 for MSI/MSI-X pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pcieport-driver 0000:00:1c.3: irq 382 for MSI/MSI-X pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 b44.c:v2.0 eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:19:b9:72:d4:1f console [netcon0] enabled netconsole: network logging started Driver 'sd' needs updating - please use bus_type methods PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu Advanced Linux Sound Architecture Driver Version 1.0.18rc3. ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 296k freed Write protecting the kernel text: 2652k Write protecting the kernel read-only data: 868k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ACPI: SSDT 3F6D4134, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT 3F6D3EE9, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 3F6D4378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) ACPI: SSDT 3F6D40AF, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (53 C) Clocksource tsc unstable (delta = 2023093691 ns) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata_piix 0000:00:1f.2: setting latency timer to 64 firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 usbcore: registered new device driver usb scsi0 : ata_piix ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI version 1.10 ata1.00: ATA-7: ST980811AS, 3.CDD, max UDMA/133 ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2.00: ATAPI: TSSTcorpCD-RW/DVD-ROM TSL462D, DE04, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA ST980811AS 3.CD PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM TSSTcorp CDRW/DVD TSL462D DE04 PQ: 0 ANSI: 5 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Driver 'sr' needs updating - please use bus_type methods uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 firewire_core: created device fw0: GUID 344fc00010d7ad81, S400 PM: Starting manual resume from disk ReiserFS: sda6: found reiserfs format "3.6" with standard journal ReiserFS: sda6: using writeback data mode ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda6: checking transaction log (sda6) ReiserFS: sda6: Using r5 hash to sort names udevd version 124 started agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button (CM) [PBTN] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 ACPI: Sleep Button (CM) [SBTN] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks iwl3945: Copyright(c) 2003-2008 Intel Corporation iwl3945 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 iwl3945 0000:0b:00.0: setting latency timer to 64 iwl3945: Detected Intel Wireless WiFi Link 3945ABG iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels phy0: Selected rate control algorithm 'iwl-3945-rs' iwl3945 0000:0b:00.0: PCI INT A disabled Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4 Adding 1293192k swap on /dev/sda5. Priority:-1 extents:1 across:1293192k kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20080730 on minor 0 iwl3945 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 iwl3945 0000:0b:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) iwl3945 0000:0b:00.0: irq 381 for MSI/MSI-X iwl3945 0000:0b:00.0: firmware: requesting iwlwifi-3945-1.ucode wlan0: direct probe to AP 00:1c:df:67:1f:ac try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1c:df:67:1f:ac wlan0: authenticated wlan0: associate with AP 00:1c:df:67:1f:ac wlan0: RX AssocResp from 00:1c:df:67:1f:ac (capab=0x401 status=0 aid=2) wlan0: associated wlan0: disassociating by local choice (reason=3) CE: hpet increasing min_delta_ns to 15000 nsec CE: hpet increasing min_delta_ns to 22500 nsec CE: hpet increasing min_delta_ns to 33750 nsec wlan0: direct probe to AP 00:1c:df:67:1f:ac try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1c:df:67:1f:ac wlan0: authenticated wlan0: associate with AP 00:1c:df:67:1f:ac wlan0: RX ReassocResp from 00:1c:df:67:1f:ac (capab=0x401 status=0 aid=2) wlan0: associated NET: Registered protocol family 10 ADDRCONF(NETDEV_UP): eth0: link is not ready wlan0: no IPv6 routers present CE: hpet increasing min_delta_ns to 50624 nsec ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata2.00: ST_FIRST: !(DRQ|ERR|DF) ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) ata2.00: status: { DRDY } ata2: soft resetting link ata2.00: configured for UDMA/33 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata2.00: ST_FIRST: !(DRQ|ERR|DF) ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in cdb 4a 01 00 00 10 00 00 00 08 00 00 00 00 00 00 00 res 50/00:01:00:08:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) ata2.00: status: { DRDY } ata2: soft resetting link ata2.00: configured for UDMA/33 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata2.00: ST_FIRST: !(DRQ|ERR|DF) ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in cdb 4a 01 00 00 10 00 00 00 08 00 00 00 00 00 00 00 res 50/00:01:00:08:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) ata2.00: status: { DRDY } ata2: soft resetting link ata2.00: configured for UDMA/33 ata2: EH complete -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/