Message-ID: <495E37BC.1040101@rtr.ca>
Date: Fri, 02 Jan 2009 10:50:20 -0500
From: Mark Lord <lkml@rtr.ca>
Organization: Real-Time Remedies Inc.
User-Agent: Thunderbird 2.0.0.18 (X11/20081125)
MIME-Version: 1.0
To: linux-kernel@vger.kernel.org, gregkh@suse.de, linux-usb@vger.kernel.org
Subject: Re: Enable CONFIG_USB_SUSPEND by default or some mobile HD can't
 be unplugged safely
References: <20090101160343.GA4278@thyme.bj.intel.com> <20090102095643.GB17103@x61>
In-Reply-To: <20090102095643.GB17103@x61>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1434
Lines: 32

Tino Keitel wrote:
> On Fri, Jan 02, 2009 at 00:03:43 +0800, Yan Li wrote:
>> Hello List,
>>
>> By default CONFIG_USB_SUSPEND is not enabled and today I got bite by
>> this when I got a new WDC My Book hard drive. I have no way to unplug
>> it safely, according to it's manual, with a kernel that doesn't have
>> CONFIG_USB_SUSPEND=y.
>>
>> On it's manual read "you should unplug and remove the device only when
>> the light is off." On Linux unmounting it won't turn it's light off
>> and I can feel it's motor is still running.  The only way to unplug it
>> properly on a Linux system, as to my knowledge, is to echo `suspend'
>> to `/sys/bus/usb/devices/$DEV/power/level'. And one has to have
>> CONFIG_USB_SUSPEND=y to do this.
> 
> With a WD My Passport drive (2,5"), I need to use sg_start --stop --pc=3
> to stop the disk before unplugging it. Maybe this works with your
> drive, too.  This is also required by some Firewire hard disks.  Maybe
> the eject command should be extended to use this method, as it is used
> also by HAL to eject hotplug devices.
..

Incidently, the WD Passport drives support SG_IO,
so things like hdparm and smartctl can work with them as well.

Cheers
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/