Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759855AbZAHRlh (ORCPT ); Thu, 8 Jan 2009 12:41:37 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751567AbZAHRl2 (ORCPT ); Thu, 8 Jan 2009 12:41:28 -0500 Received: from alpha.facton.com ([83.236.152.122]:38359 "EHLO alpha.facton.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752599AbZAHRl1 convert rfc822-to-8bit (ORCPT ); Thu, 8 Jan 2009 12:41:27 -0500 X-MimeOLE: Produced By Microsoft Exchange V6.5 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT Subject: Re: hwinfo problem since 2.6.28 Date: Thu, 8 Jan 2009 18:41:15 +0100 Message-ID: <3C59DB883F7B0B4D8096010D45ACCD13C73EC7@exch.facton.local> In-Reply-To: <86802c440901080203m221def59qf1cd9fa3d017fd38@mail.gmail.com> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Re: hwinfo problem since 2.6.28 Thread-Index: AclxeFAAP12qHlCdT0WJr07P7ljZuAAP2bgg References: <3C59DB883F7B0B4D8096010D45ACCD13C73EA2@exch.facton.local> <86802c440901080203m221def59qf1cd9fa3d017fd38@mail.gmail.com> From: "Beschorner Daniel" To: "Yinghai Lu" Cc: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 26146 Lines: 601 > On Tue, Jan 6, 2009 at 12:53 AM, Beschorner Daniel > wrote: > > Since 2.6.28 my hwinfo tool crashes badly on 2 years old > OpenSuSE 10.2 > > x64/SMP. > > Older kernels run fine, I did a "make oldconfig" and rather used > > defaults (just skipping low-64k checks). > > This seems to be the only affected binary as far I can see. > > Did I miss a new legacy/compat option or is it a bug? > > > > Thank you! > > Daniel > > > > hwinfo: Corrupted page table at address 7fd04de3ec00 > > PGD 7dc33067 PUD 3efe067 PMD 27b83067 PTE fffffffffffffbff > > Bad pagetable: 000d [#9] SMP > > last sysfs file: > /sys/devices/pci0000:00/0000:00:1e.0/0000:06:05.0/class > > CPU 0 > > Modules linked in: > > Pid: 13700, comm: hwinfo Tainted: G D 2.6.28 #7 > > RIP: 0033:[<00007fd04d66f7f2>] [<00007fd04d66f7f2>] 0x7fd04d66f7f2 > > RSP: 002b:00007fff55ed2c68 EFLAGS: 00010202 > > RAX: 00000000015d1fb0 RBX: 0000000000001000 RCX: fefefefefefefeff > > RDX: 0000000000000001 RSI: 00007fd04de3ec00 RDI: 00000000015d1fb0 > > RBP: 000000000009fc00 R08: ffffffffff000000 R09: 00007fd04d6fbd60 > > R10: ffffffffffffffff R11: 0000000000000000 R12: 00007fd04d9a72f6 > > R13: 000000000009f000 R14: 0000000000000003 R15: 00000000015b4010 > > FS: 00007fd04dec06f0(0000) GS:ffffffff80619540(0000) > > knlGS:0000000000000000 > > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > > CR2: 00007fd04de3ec00 CR3: 000000007de55000 CR4: 00000000000006e0 > > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > > Process hwinfo (pid: 13700, threadinfo ffff88007dff2000, task > > ffff88007ed934a0) > > > > RIP [<00007fd04d66f7f2>] 0x7fd04d66f7f2 > > RSP <00007fff55ed2c68> > > ---[ end trace 742092d3bead57cc ]--- > > > > bootlog with debug in command line? > > YH BIOS EBDA/lowmem at: 0009fc00/0009fc00 Linux version 2.6.28 (root@box) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #7 SMP Mon Jan 5 14:32:39 CET 2009 Command line: root=/dev/md1 debug KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable) BIOS-e820: 000000007ffc0000 - 000000007ffcfc00 (ACPI data) BIOS-e820: 000000007ffcfc00 - 000000007ffff000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed13000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x7ffc0 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: 0000000000000000-000000007ffc0000 0000000000 - 007fe00000 page 2M 007fe00000 - 007ffc0000 page 4k kernel direct mapping tables up to 7ffc0000 @ 8000-c000 last_map_addr: 7ffc0000 end: 7ffc0000 ACPI: RSDP 000F9EA0, 0024 (r2 DELL ) ACPI: XSDT 000F9F14, 0054 (r1 DELL PE_SC3 1 INTL 1) ACPI: FACP 000FA004, 00F4 (r3 DELL PE_SC3 1 INTL 1) FADT: X_PM1a_EVT_BLK.bit_width (4) does not match PM1_EVT_LEN (4) ACPI: DSDT 7FFC0000, 1F8A (r1 DELL PE_SC3 1 INTL 20050624) ACPI: FACS 7FFCFC00, 0040 ACPI: APIC 000FA0F8, 0084 (r1 DELL PE_SC3 1 INTL 1) ACPI: SPCR 000FA17C, 0050 (r1 DELL PE_SC3 1 INTL 1) ACPI: HPET 000FA1CC, 0038 (r1 DELL PE_SC3 1 INTL 1) ACPI: MCFG 000FA204, 003C (r1 DELL PE_SC3 1 INTL 1) ACPI: SLIC 000FA240, 0176 (r1 DELL PE_SC3 1 INTL 1) ACPI: Local APIC address 0xfee00000 (5 early reservations) ==> bootmem [0000000000 - 007ffc0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 00006bab70] TEXT DATA BSS ==> [0000200000 - 00006bab70] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000fe710] 000fe710 [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x000000a0 0: 0x00000100 -> 0x0007ffc0 On node 0 totalpages: 524128 DMA zone: 56 pages used for memmap DMA zone: 1313 pages reserved DMA zone: 2631 pages, LIFO batch:0 DMA32 zone: 7112 pages used for memmap DMA32 zone: 513016 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[32]) IOAPIC[1]: apic_id 3, version 0, address 0xfec10000, GSI 32-55 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: HPET id: 0xffffffff base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs Allocating PCI resources starting at 80000000 (gap: 7ffff000:70001000) PERCPU: Allocating 45056 bytes of per cpu data NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515647 Kernel command line: root=/dev/md1 debug Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2133.207 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Memory: 2059132k/2096896k available (2894k kernel code, 384k absent, 36816k reserved, 1241k data, 332k init) hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.41 BogoMIPS (lpj=8532828) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. Freeing SMP alternatives: 25k freed ACPI: Core revision 20080926 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Xeon(R) CPU 3050 @ 2.13GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4266.82 BogoMIPS (lpj=8533655) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Xeon(R) CPU 3050 @ 2.13GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (8533.24 BogoMIPS). net_namespace: 912 bytes NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xbce0-0xbcff] pci 0000:00:1d.1: reg 20 io port: [0xbcc0-0xbcdf] pci 0000:00:1d.2: reg 20 io port: [0xbca0-0xbcbf] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeb00400-0xfeb007ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f] pci 0000:00:1f.2: reg 10 io port: [0xbc98-0xbc9f] pci 0000:00:1f.2: reg 14 io port: [0xbc90-0xbc93] pci 0000:00:1f.2: reg 18 io port: [0xbc80-0xbc87] pci 0000:00:1f.2: reg 1c io port: [0xbc78-0xbc7b] pci 0000:00:1f.2: reg 20 io port: [0xbc60-0xbc6f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfeb00000-0xfeb003ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0x8c0-0x8df] pci 0000:02:00.0: PXH quirk detected; SHPC device MSI disabled pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: bridge 32bit mmio: [0xfea00000-0xfeafffff] pci 0000:04:00.0: reg 10 64bit mmio: [0xfe8f0000-0xfe8fffff] pci 0000:04:00.0: PME# supported from D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.4: bridge io port: [0xe000-0xefff] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe800000-0xfe9fffff] pci 0000:05:00.0: reg 10 64bit mmio: [0xfe6f0000-0xfe6fffff] pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe600000-0xfe7fffff] pci 0000:06:05.0: reg 10 32bit mmio: [0xe8000000-0xefffffff] pci 0000:06:05.0: reg 14 io port: [0xcc00-0xccff] pci 0000:06:05.0: reg 18 32bit mmio: [0xfe4f0000-0xfe4fffff] pci 0000:06:05.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:06:05.0: supports D1 D2 pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe400000-0xfe5fffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe8000000-0xefffffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PES1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP0.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:07: ioport range 0x800-0x87f has been reserved system 00:07: ioport range 0x880-0x8bf has been reserved system 00:07: ioport range 0x8c0-0x8df has been reserved system 00:07: ioport range 0x8e0-0x8e3 has been reserved system 00:07: ioport range 0xc00-0xc0f has been reserved system 00:07: ioport range 0xc10-0xc1f has been reserved system 00:07: ioport range 0xca0-0xca7 has been reserved system 00:07: ioport range 0xca9-0xcab has been reserved system 00:07: ioport range 0xcad-0xcaf has been reserved system 00:07: ioport range 0xc20-0xc3f has been reserved system 00:09: iomem range 0xf0000000-0xf3ffffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: disabled pci 0000:00:01.0: PREFETCH window: disabled pci 0000:02:00.0: PCI bridge, secondary bus 0000:03 pci 0000:02:00.0: IO window: disabled pci 0000:02:00.0: MEM window: disabled pci 0000:02:00.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xfea00000-0xfeafffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.4: IO window: 0xe000-0xefff pci 0000:00:1c.4: MEM window: 0xfe800000-0xfe9fffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.5: IO window: 0xd000-0xdfff pci 0000:00:1c.5: MEM window: 0xfe600000-0xfe7fffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: 0xc000-0xcfff pci 0000:00:1e.0: MEM window: 0xfe400000-0xfe5fffff pci 0000:00:1e.0: PREFETCH window: 0x000000e8000000-0x000000efffffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:02:00.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI INT C -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] bus: 01 index 0 mmio: [0x0-0x0] bus: 01 index 1 mmio: [0x0-0x0] bus: 01 index 2 mmio: [0x0-0x0] bus: 01 index 3 mmio: [0x0-0x0] bus: 02 index 0 mmio: [0x0-0x0] bus: 02 index 1 mmio: [0xfea00000-0xfeafffff] bus: 02 index 2 mmio: [0x0-0x0] bus: 02 index 3 mmio: [0x0-0x0] bus: 03 index 0 mmio: [0x0-0x0] bus: 03 index 1 mmio: [0x0-0x0] bus: 03 index 2 mmio: [0x0-0x0] bus: 03 index 3 mmio: [0x0-0x0] bus: 04 index 0 io port: [0xe000-0xefff] bus: 04 index 1 mmio: [0xfe800000-0xfe9fffff] bus: 04 index 2 mmio: [0x0-0x0] bus: 04 index 3 mmio: [0x0-0x0] bus: 05 index 0 io port: [0xd000-0xdfff] bus: 05 index 1 mmio: [0xfe600000-0xfe7fffff] bus: 05 index 2 mmio: [0x0-0x0] bus: 05 index 3 mmio: [0x0-0x0] bus: 06 index 0 io port: [0xc000-0xcfff] bus: 06 index 1 mmio: [0xfe400000-0xfe5fffff] bus: 06 index 2 mmio: [0xe8000000-0xefffffff] bus: 06 index 3 io port: [0x00-0xffff] bus: 06 index 4 mmio: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 alg: cipher: Test 1 failed on encryption for aes-asm 00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08 msgmni has been set to 4022 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:06:05.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pcieport-driver 0000:00:01.0: irq 319 for MSI/MSI-X pci_express 0000:00:01.0:pcie00: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pcieport-driver 0000:00:1c.0: irq 318 for MSI/MSI-X pci_express 0000:00:1c.0:pcie00: allocate port service pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: found MSI capability pcieport-driver 0000:00:1c.4: irq 317 for MSI/MSI-X pci_express 0000:00:1c.4:pcie00: allocate port service pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: found MSI capability pcieport-driver 0000:00:1c.5: irq 316 for MSI/MSI-X pci_express 0000:00:1c.5:pcie00: allocate port service Real Time Clock Driver v1.12ac Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A tg3.c:v3.94 (August 14, 2008) tg3 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 tg3 0000:04:00.0: setting latency timer to 64 eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:c5:f5:29:9e eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] tg3 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 tg3 0000:05:00.0: setting latency timer to 64 eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:c5:f5:29:9f eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76180000] dma_mask[64-bit] Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01) pci 0000:00:1f.1: can't derive routing for PCI INT A piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07 Probing IDE interface ide0... hda: HL-DT-ST DVD-ROM GDR-8084N, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-cd driver 5.00 ide-cd: hda: ATAPI 24X DVD-ROM drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xbc98 ctl 0xbc90 bmdma 0xbc60 irq 20 ata2: SATA max UDMA/133 cmd 0xbc80 ctl 0xbc78 bmdma 0xbc68 irq 20 ata1.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133 ata1.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133 ata2.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-75MS 10.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access ATA WDC WD800JD-75MS 10.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 156250000 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 156250000 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 sd 1:0:0:0: [sdb] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg1 type 0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfeb00400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bce0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bcc0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bca0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input0 md: raid1 personality registered for level 1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver u32 classifier nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 8 and added 8 devices. md: autorun ... md: considering sdb4 ... md: adding sdb4 ... md: sdb3 has different UUID to sdb4 md: sdb2 has different UUID to sdb4 md: sdb1 has different UUID to sdb4 md: adding sda4 ... md: sda3 has different UUID to sdb4 md: sda2 has different UUID to sdb4 md: sda1 has different UUID to sdb4 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md: considering sdb3 ... md: adding sdb3 ... md: sdb2 has different UUID to sdb3 md: sdb1 has different UUID to sdb3 md: adding sda3 ... md: sda2 has different UUID to sdb3 md: sda1 has different UUID to sdb3 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering sdb2 ... md: adding sdb2 ... md: sdb1 has different UUID to sdb2 md: adding sda2 ... md: sda1 has different UUID to sdb2 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. md1: unknown partition table usb 1-3: new high speed USB device using ehci_hcd and address 2 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 332k freed usb 1-3: configuration #1 chosen from 1 choice hub 1-3:1.0: USB hub found hub 1-3:1.0: 4 ports detected usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice input: HID 2101:020f as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input1 generic-usb 0003:2101:020F.0001: input: USB HID v1.01 Keyboard [HID 2101:020f] on usb-0000:00:1d.2-1/input0 input: HID 2101:020f as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input2 generic-usb 0003:2101:020F.0002: input: USB HID v1.01 Mouse [HID 2101:020f] on usb-0000:00:1d.2-1/input1 md0: unknown partition table Adding 530040k swap on /dev/md0. Priority:-1 extents:1 across:530040k EXT3 FS on md1, internal journal md3: unknown partition table md2: unknown partition table kjournald starting. Commit interval 5 seconds EXT3 FS on md3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md2, internal journal EXT3-fs: mounted filesystem with ordered data mode. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/