Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754030AbZALHi1 (ORCPT ); Mon, 12 Jan 2009 02:38:27 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751618AbZALHiP (ORCPT ); Mon, 12 Jan 2009 02:38:15 -0500 Received: from fg-out-1718.google.com ([72.14.220.155]:15906 "EHLO fg-out-1718.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751521AbZALHiK (ORCPT ); Mon, 12 Jan 2009 02:38:10 -0500 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type :content-transfer-encoding; b=aBJd0lDmda1EilCvQ7ZB34QJtZkBf9obEM6dv9H/h1JFY2l1UbuKiBcr+yjcZWBcqX vJCPLstAneY4kEYkGKkj0ZD1iC5qbz2En2BNuWkH8lbd2HfxmNCwcmx7sRwOhbvJhJmT ZoYyRBlPl5eqzf+O+j4HjjG/5sfVtDov2kWVI= MIME-Version: 1.0 Date: Mon, 12 Jan 2009 10:38:08 +0300 Message-ID: Subject: ath5k related kernel panic in 2.6.29-rc1 From: "Sergey S. Kostyliov" To: linux-wireless@vger.kernel.org, ath5k-devel@venema.h4ckr.net, linux-kernel@vger.kernel.org Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 32209 Lines: 689 Full dmesg including an oops is below: Linux version 2.6.29-rc1 (rathamahata@autonomist.ath.cx) (gcc version 4.3.2 (Gentoo 4.3.2-r2 p1.5, pie-10.1.5) ) #2 SMP PREEMPT Mon Jan 12 00:08:24 MSK 2009 Command line: BOOT_IMAGE=/boot/linux-2.6.29-rc1 root=/dev/sda2 rootflags=commit=11 elevator=deadline netconsole=6666@192.168.168.2/eth0,6667@192.168.168.1/00:13:8f:e0:34:f5 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003de80000 (usable) BIOS-e820: 000000003de80000 - 000000003de97000 (ACPI data) BIOS-e820: 000000003de97000 - 000000003df00000 (ACPI NVS) BIOS-e820: 000000003df00000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x3de80 max_arch_pfn = 0x100000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: 0000000000000000-000000003de80000 last_map_addr: 3de80000 end: 3de80000 ACPI: RSDP 000F7D80, 0014 (r0 ACRSYS) ACPI: RSDT 3DE8E70B, 0038 (r1 ACRSYS ACRPRDCT 6040000 LTP 0) ACPI: FACP 3DE96C04, 0074 (r1 ATI Bowfin 6040000 ATI F4240) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) FADT: X_PM1b_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 3DE8E743, 84C1 (r1 Acer Navarro 6040000 MSFT 3000000) ACPI: FACS 3DE97FC0, 0040 ACPI: SLIC 3DE96C78, 0176 (r1 ACRSYS ACRPRDCT 6040000 LOHR 0) ACPI: APIC 3DE96DEE, 0054 (r1 PTLTD APIC 6040000 LTP 0) ACPI: MCFG 3DE96E42, 003C (r1 PTLTD MCFG 6040000 LTP 0) ACPI: SSDT 3DE96E7E, 0182 (r1 PTLTD POWERNOW 6040000 LTP 1) (5 early reservations) ==> bootmem [0000000000 - 003de80000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000089cff4] TEXT DATA BSS ==> [0000200000 - 000089cff4] #3 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #4 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] found SMP MP-table at [ffff8800000f7e40] 000f7e40 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x0003de80 SB4X0 revision 0x83 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Allocating 49152 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 248206 Kernel command line: BOOT_IMAGE=/boot/linux-2.6.29-rc1 root=/dev/sda2 rootflags=commit=11 elevator=deadline netconsole=6666@192.168.168.2/eth0,6667@192.168.168.1/00:13:8f:e0:34:f5 Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 1596.202 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ cd0000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 990432k/1014272k available (4414k kernel code, 396k absent, 22856k reserved, 1647k data, 320k init) SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.40 BogoMIPS (lpj=1596202) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine ACPI: Core revision 20081204 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3191.37 BogoMIPS (lpj=1595687) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 System has AMD C1E enabled CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02 Brought up 2 CPUs Total of 2 processors activated (6383.77 BogoMIPS). net_namespace: 936 bytes NET: Registered protocol family 16 Switch to broadcast mode on CPU1 TOM: 0000000040000000 aka 1024M ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - e07fffff PCI: Using configuration type 1 for base access Switch to broadcast mode on CPU0 bio: create slab at 0 ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:02:00.0: PME# supported from D3hot pci 0000:02:00.0: PME# disabled pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:06:01.0: PME# supported from D1 D2 D3hot D3cold pci 0000:06:01.0: PME# disabled pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:06:04.0: PME# disabled pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot pci 0000:06:04.1: PME# disabled pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot pci 0000:06:04.2: PME# disabled pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot pci 0000:06:04.3: PME# disabled pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot pci 0000:06:04.4: PME# disabled pci 0000:00:14.4: transparent bridge ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pci 0000:00:04.0: BAR 7: can't allocate resource pci 0000:00:04.0: BAR 8: can't allocate resource pci 0000:00:04.0: BAR 9: can't allocate resource pci 0000:00:05.0: BAR 7: can't allocate resource pci 0000:00:05.0: BAR 8: can't allocate resource pci 0000:02:00.0: BAR 0: can't allocate resource cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:12.0 BAR 6 (0x0-0x7ffff), disabling pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:02:00.0 BAR 0 (0x0-0xffff), disabling pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved system 00:08: ioport range 0x1080-0x1080 has been reserved system 00:08: ioport range 0x40b-0x40b has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x4d6-0x4d6 has been reserved system 00:08: ioport range 0xc00-0xc01 has been reserved system 00:08: ioport range 0xc14-0xc14 has been reserved system 00:08: ioport range 0xc50-0xc52 has been reserved system 00:08: ioport range 0xc6c-0xc6c has been reserved system 00:08: ioport range 0xc6f-0xc6f has been reserved system 00:08: ioport range 0xcd4-0xcd5 has been reserved system 00:08: ioport range 0xcd6-0xcd7 has been reserved system 00:08: ioport range 0xcd8-0xcdf has been reserved system 00:08: ioport range 0x8000-0x805f has been reserved system 00:08: ioport range 0xf40-0xf47 has been reserved system 00:08: ioport range 0x280-0x293 has been reserved system 00:08: ioport range 0x87f-0x87f has been reserved system 00:09: iomem range 0xe0000-0xfffff could not be reserved system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x9000-0x9fff pci 0000:00:01.0: MEM window: 0xfc000000-0xfc0fffff pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM window: 0x54000000-0x540fffff pci 0000:00:04.0: PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary bus 0000:04 pci 0000:00:05.0: IO window: disabled pci 0000:00:05.0: MEM window: disabled pci 0000:00:05.0: PREFETCH window: disabled pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07 pci 0000:06:04.0: IO window: 0x00a400-0x00a4ff pci 0000:06:04.0: IO window: 0x00a800-0x00a8ff Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #1 pci 0000:06:04.0: PREFETCH window: 0x50000000-0x53ffffff pci 0000:06:04.0: MEM window: 0x58000000-0x5bffffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:06 pci 0000:00:14.4: IO window: 0xa000-0xafff pci 0000:00:14.4: MEM window: 0xfc200000-0xfc2fffff pci 0000:00:14.4: PREFETCH window: 0x00000050000000-0x00000053ffffff pci 0000:00:04.0: enabling device (0000 -> 0002) pci 0000:06:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 HugeTLB registered 2 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with security attributes, large block/inode numbers, no debug enabled msgmni has been set to 1935 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered pci 0000:00:00.0: MSI quirk detected; MSI disabled ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 ACPI: Sleep Button (CM) [SLPB] ACPI: processor limited to max C-state 1 processor ACPI_CPU:00: registered as cooling_device0 processor ACPI_CPU:01: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (68 C) lp: driver loaded but no devices found Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 pci 0000:01:05.0: power state changed by ACPI to D0 pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [drm] Initialized radeon 1.29.0 20080528 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 8139too Fast Ethernet driver 0.9.28 8139too 0000:06:01.0: power state changed by ACPI to D0 8139too 0000:06:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 eth0: RealTek RTL8139 at 0xffffc20000032000, 00:16:d4:ce:03:15, IRQ 21 ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ath5k 0000:02:00.0: registered as 'phy0' wmaster0 (ath5k): not using net_device_ops yet wlan0 (ath5k): not using net_device_ops yet ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) netconsole: local port 6666 netconsole: local IP 192.168.168.2 netconsole: interface eth0 netconsole: remote port 6667 netconsole: remote IP 192.168.168.1 netconsole: remote ethernet address 00:13:8f:e0:34:f5 netconsole: device eth0 not up yet, forcing it eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 netconsole: carrier detect appears untrustworthy, waiting 4 seconds console [netcon0] enabled netconsole: network logging started Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods sata_sil 0000:00:12.0: enabling device (0005 -> 0007) sata_sil 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 scsi0 : sata_sil scsi1 : sata_sil ata1: SATA max UDMA/100 mmio m512@0xfc507000 tf 0xfc507080 irq 22 ata2: SATA max UDMA/100 mmio m512@0xfc507000 tf 0xfc5070c0 irq 22 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC70P, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ata2: SATA link down (SStatus 0 SControl 310) pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 scsi2 : pata_atiixp scsi3 : pata_atiixp ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14 ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15 ata3.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 ata3.00: configured for UDMA/33 scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi generic sg1 type 5 ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfc506000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.29-rc1 ehci_hcd usb usb1: SerialNumber: 0000:00:13.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 19, io mem 0xfc504000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.29-rc1 ohci_hcd usb usb2: SerialNumber: 0000:00:13.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 19, io mem 0xfc505000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.29-rc1 ohci_hcd usb usb3: SerialNumber: 0000:00:13.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram i2c /dev entries driver piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0 cpuidle: using governor ladder cpuidle: using governor menu sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) sdhci-pci 0000:06:04.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 Registered led device: mmc0 mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) sdhci-pci 0000:06:04.4: PCI INT B -> GSI 23 (level, low) -> IRQ 23 Registered led device: mmc1 mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.18a. HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ALSA device list: #0: HDA ATI SB at 0xfc500000 irq 16 TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13 powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e rtc_cmos 00:04: setting system clock to 2009-01-11 21:15:02 UTC (1231708502) usb 1-4: new high speed USB device using ehci_hcd and address 2 usb 1-4: New USB device found, idVendor=5986, idProduct=0100 usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-4: Product: USB2.0 Camera usb 1-4: configuration #1 chosen from 1 choice Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5 EXT4-fs: barriers enabled kjournald2 starting: pid 1199, dev sda2:8, commit interval 11 seconds EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem sda2 with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 8:2. Freeing unused kernel memory: 320k freed usb 2-4: new low speed USB device using ohci_hcd and address 2 usb 2-4: New USB device found, idVendor=046d, idProduct=c019 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-4: Product: USB Optical Mouse usb 2-4: Manufacturer: Logitech usb 2-4: configuration #1 chosen from 1 choice input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/input/input6 generic-usb 0003:046D:C019.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-4/input0 SysRq : Changing Loglevel Loglevel set to 6 SysRq : Changing Loglevel Loglevel set to 8 ------------[ cut here ]------------ WARNING: at net/mac80211/tx.c:567 invoke_tx_handlers+0xdde/0xe30() Hardware name: Aspire 5100 Modules linked in: Pid: 3508, comm: rsync Not tainted 2.6.29-rc1 #2 Call Trace: [] warn_slowpath+0xea/0x160 [] invoke_tx_handlers+0xdde/0xe30 [] __ieee80211_tx_prepare+0x196/0x310 [] pskb_expand_head+0x110/0x180 [] ieee80211_master_start_xmit+0x20a/0x4c0 [] __qdisc_run+0x226/0x270 [] dev_queue_xmit+0x2a0/0x5b0 [] ieee80211_subif_start_xmit+0x3b3/0x610 [] __qdisc_run+0x226/0x270 [] dev_queue_xmit+0x2a0/0x5b0 [] ip_queue_xmit+0x22e/0x430 [] pollwake+0x0/0x50 [] tcp_transmit_skb+0x4bf/0x760 [] tcp_write_xmit+0x1f9/0xa40 [] __tcp_push_pending_frames+0x23/0x80 [] tcp_sendmsg+0x8b5/0xc00 [] dput+0xa8/0x170 [] sock_aio_write+0x147/0x160 [] do_sync_write+0xdb/0x120 [] autoremove_wake_function+0x0/0x30 [] getnstimeofday+0x58/0xe0 [] ktime_get_ts+0x30/0x60 [] poll_select_copy_remaining+0x104/0x160 [] vfs_write+0x15e/0x170 [] sys_write+0x53/0xa0 [] system_call_fastpath+0x16/0x1b ---[ end trace bd3017b2640f5911 ]--- ------------[ cut here ]------------ WARNING: at net/mac80211/tx.c:56 ieee80211_duration+0x239/0x250() Hardware name: Aspire 5100 Modules linked in: Pid: 0, comm: swapper Tainted: G W 2.6.29-rc1 #2 Call Trace: [] warn_slowpath+0xea/0x160 [] getnstimeofday+0x58/0xe0 [] ktime_get_ts+0x30/0x60 [] __rmqueue_smallest+0x105/0x1b0 [] __rmqueue+0x30/0x2b0 [] tick_handle_oneshot_broadcast+0xc4/0x100 [] ath5k_hw_start_tx_dma+0xfd/0x140 [] ath5k_tx+0x494/0x5d0 [] invoke_tx_handlers+0x7cd/0xe30 [] ieee80211_duration+0x239/0x250 [] invoke_tx_handlers+0x7cd/0xe30 [] __ieee80211_tx_prepare+0x196/0x310 [] pskb_expand_head+0x110/0x180 [] ieee80211_master_start_xmit+0x20a/0x4c0 [] __qdisc_run+0x226/0x270 [] dev_queue_xmit+0x2a0/0x5b0 [] ieee80211_subif_start_xmit+0x3b3/0x610 [] activate_task+0x2f/0x50 [] __qdisc_run+0x226/0x270 [] dev_queue_xmit+0x2a0/0x5b0 [] ip_queue_xmit+0x22e/0x430 [] ieee80211_deliver_skb+0xbb/0x1a0 [] ieee80211_invoke_rx_handlers+0x409/0x15c0 [] tcp_transmit_skb+0x4bf/0x760 [] tcp_rcv_established+0x3cd/0x920 [] tcp_v4_do_rcv+0xdd/0x210 [] tcp_v4_rcv+0x672/0x710 [] ip_local_deliver_finish+0xb5/0x160 [] ip_rcv_finish+0x121/0x340 [] nommu_map_single+0x0/0xa0 [] netif_receive_skb+0x28b/0x370 [] process_backlog+0x70/0xc0 [] net_rx_action+0x121/0x1e0 [] __do_softirq+0x73/0x130 [] call_softirq+0x1c/0x30 [] do_softirq+0x35/0x80 [] irq_exit+0x8d/0xb0 [] do_IRQ+0x83/0x110 [] ret_from_intr+0x0/0xa <4>---[ end trace bd3017b2640f5912 ]--- ------------[ cut here ]------------ WARNING: at include/net/mac80211.h:991 ath5k_tx+0x4b5/0x5d0() Hardware name: Aspire 5100 Modules linked in: Pid: 0, comm: swapper Tainted: G W 2.6.29-rc1 #2 Call Trace: [] ath5k_hw_setup_4word_tx_desc+0x0/0x260 [] ath5k_hw_setup_4word_tx_desc+0x0/0x260 [] warn_slowpath+0xea/0x160 [] getnstimeofday+0x58/0xe0 [] ktime_get_ts+0x30/0x60 [] __rmqueue_smallest+0x105/0x1b0 [] tick_handle_oneshot_broadcast+0xc4/0x100 [] ath5k_tx+0x494/0x5d0 [] invoke_tx_handlers+0x7cd/0xe30 [] ath5k_hw_setup_4word_tx_desc+0x0/0x260 [] ath5k_tx+0x4b5/0x5d0 [] invoke_tx_handlers+0x7cd/0xe30 [] ath5k_hw_setup_4word_tx_desc+0x0/0x260 [] pskb_expand_head+0x110/0x180 [] __ieee80211_tx+0x4e/0x150 [] ieee80211_master_start_xmit+0x231/0x4c0 [] __qdisc_run+0x226/0x270 [] dev_queue_xmit+0x2a0/0x5b0 [] ieee80211_subif_start_xmit+0x3b3/0x610 [] activate_task+0x2f/0x50 [] __qdisc_run+0x226/0x270 [] dev_queue_xmit+0x2a0/0x5b0 [] ip_queue_xmit+0x22e/0x430 [] ieee80211_deliver_skb+0xbb/0x1a0 [] ieee80211_invoke_rx_handlers+0x409/0x15c0 [] tcp_transmit_skb+0x4bf/0x760 [] tcp_rcv_established+0x3cd/0x920 [] tcp_v4_do_rcv+0xdd/0x210 [] tcp_v4_rcv+0x672/0x710 [] ip_local_deliver_finish+0xb5/0x160 [] ip_rcv_finish+0x121/0x340 [] nommu_map_single+0x0/0xa0 [] netif_receive_skb+0x28b/0x370 [] process_backlog+0x70/0xc0 [] net_rx_action+0x121/0x1e0 [] __do_softirq+0x73/0x130 [] call_softirq+0x1c/0x30 [] do_softirq+0x35/0x80 [] irq_exit+0x8d/0xb0 [] do_IRQ+0x83/0x110 [] ret_from_intr+0x0/0xa <4>---[ end trace bd3017b2640f5913 ]--- BUG: unable to handle kernel NULL pointer dereference at 0000000000000006 IP: [] ath5k_tx+0x208/0x5d0 PGD 3c9dc067 PUD 3c079067 PMD 0 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1c/PNP0C0A:00/power_supply/BAT1/charge_full CPU 1 Modules linked in: Pid: 0, comm: swapper Tainted: G W 2.6.29-rc1 #2 RIP: 0010:[] [] ath5k_tx+0x208/0x5d0 RSP: 0018:ffff88003d88b8a8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffff804abbe0 RCX: ffffffff804a6ff5 RDX: ffff8800807ca000 RSI: 0000000000000046 RDI: ffff8800350d6000 RBP: ffff88003cc9b090 R08: ffff88000101be00 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88003d9d5890 R13: ffff88003cd51900 R14: ffff8800350d6000 R15: 0000000000000011 FS: 00007fd3486846f0(0000) GS:ffff88003d805b00(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000006 CR3: 000000003acb4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff88003d884000, task ffff88003d862160) Stack: ffff88003cd502a0 ffff88003cd7b080 ffff88003cd7b080 0000000000000001 ffff88003d88b9e8 ffff8800350d6000 ffff88003cd7b080 ffffffff8062f0bd ffff88003d88b958 ffff88003cd54b90 ffff88003cd54b80 00000060ffffffff Call Trace: <0> [] ? invoke_tx_handlers+0x7cd/0xe30 [] ? ath5k_hw_setup_4word_tx_desc+0x0/0x260 [] ? pskb_expand_head+0x110/0x180 [] ? __ieee80211_tx+0x4e/0x150 [] ? ieee80211_master_start_xmit+0x231/0x4c0 [] ? __qdisc_run+0x226/0x270 [] ? dev_queue_xmit+0x2a0/0x5b0 [] ? ieee80211_subif_start_xmit+0x3b3/0x610 [] ? activate_task+0x2f/0x50 [] ? __qdisc_run+0x226/0x270 [] ? dev_queue_xmit+0x2a0/0x5b0 [] ? ip_queue_xmit+0x22e/0x430 [] ? ieee80211_deliver_skb+0xbb/0x1a0 [] ? ieee80211_invoke_rx_handlers+0x409/0x15c0 [] ? tcp_transmit_skb+0x4bf/0x760 [] ? tcp_rcv_established+0x3cd/0x920 [] ? tcp_v4_do_rcv+0xdd/0x210 [] ? tcp_v4_rcv+0x672/0x710 [] ? ip_local_deliver_finish+0xb5/0x160 [] ? ip_rcv_finish+0x121/0x340 [] ? nommu_map_single+0x0/0xa0 [] ? netif_receive_skb+0x28b/0x370 [] ? process_backlog+0x70/0xc0 [] ? net_rx_action+0x121/0x1e0 [] ? __do_softirq+0x73/0x130 [] ? call_softirq+0x1c/0x30 [] ? do_softirq+0x35/0x80 [] ? irq_exit+0x8d/0xb0 [] ? do_IRQ+0x83/0x110 [] ? ret_from_intr+0x0/0xa <0>Code: 8b 4c 24 60 48 8b 50 28 0f b6 41 04 48 8b 4c c2 18 48 0f be c6 48 8d 14 85 00 00 00 00 48 c1 e0 04 48 29 d0 48 03 41 08 4c 89 f7 <44> 0f b760 06 41 8b 9d 18 34 00 00 e8 07 be 17 00 89 c1 8b 44 RIP [] ath5k_tx+0x208/0x5d0 RSP CR2: 0000000000000006 ---[ end trace bd3017b2640f5914 ]--- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/