Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758327AbZASIsd (ORCPT ); Mon, 19 Jan 2009 03:48:33 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752897AbZASIsY (ORCPT ); Mon, 19 Jan 2009 03:48:24 -0500 Received: from cdptpa-omtalb.mail.rr.com ([75.180.132.120]:60091 "EHLO cdptpa-omtalb.mail.rr.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752888AbZASIsW (ORCPT ); Mon, 19 Jan 2009 03:48:22 -0500 Message-ID: <49743E52.7010906@cfl.rr.com> Date: Mon, 19 Jan 2009 03:48:18 -0500 From: Mark Hounschell User-Agent: Thunderbird 2.0.0.18 (X11/20081112) MIME-Version: 1.0 To: linux-kernel CC: Mark Hounschell Subject: Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor References: <497322CC.7050900@cfl.rr.com> In-Reply-To: <497322CC.7050900@cfl.rr.com> X-Enigmail-Version: 0.95.7 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 38043 Lines: 844 Mark Hounschell wrote: > I upgraded from a Phenom to a Phenom-II processor and I could no longer boot. > > I have tried kernels from 2.6.26 through 2.6.28. > > I _can_ however boot these kernels when they are configured for HZ = 250. I > haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot > indicated below in the dmesg output. > > The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel. > The machine is up and stable running 2.6.26.8 with a (HZ = 250) configured kernel. Sorry. > While running a 2.6.26.8 kernel configured for HZ = 250: > > /proc/version: > > Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease) > [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat Jan 17 > 16:37:58 EST 2009 > > > scripts/ver_linux: > > If some fields are empty or look unusual you may have an old version. > Compare to the current minimal requirements in Documentation/Changes. > > Linux harley 2.6.26.8 #2 SMP PREEMPT Sat Jan 17 16:37:58 EST 2009 i686 athlon > i386 GNU/Linux > > Gnu C 4.3 > Gnu make 3.81 > binutils 11.0 > 2.18.50.20080409 > 11.1 > util-linux 2.13.1 > mount 2.13.1 > module-init-tools 3.4 > e2fsprogs 1.40.8 > reiserfsprogs 3.6.19 > PPP 2.4.4 > Linux C Library 2.8 > Dynamic linker (ldd) 2.8 > Procps 3.2.7 > Net-tools 1.60 > Kbd 1.12 > Sh-utils 6.11 > udev 120 > wireless-tools 29 > Modules Loaded ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit > snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device appletalk ax25 ipx p8023 > ip6t_REJECT nf_conntrack_ipv6 ipt_REJECT xt_state iptable_mangle iptable_nat > nf_nat iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4 > nf_conntrack ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop dm_mod > snd_hda_intel snd_pcm snd_timer ati_agp nvidia snd ppdev rtc_cmos ide_cd_mod > i2c_piix4 parport_pc rtc_core usb_storage usblp soundcore cdrom agpgart > snd_page_alloc parport rtc_lib e1000e ide_disk i2c_core sg ehci_hcd ohci_hcd > sd_mod usbcore ssb e1000 sky2 edd ext3 mbcache jbd aic7xxx scsi_transport_spi > atiixp ide_core ahci pata_jmicron libata scsi_mod dock > > > /proc/cpuinfo: > > processor : 0 > vendor_id : AuthenticAMD > cpu family : 16 > model : 4 > model name : AMD Processor model unknown > stepping : 2 > cpu MHz : 3000.306 > cache size : 512 KB > physical id : 0 > siblings : 4 > core id : 0 > cpu cores : 4 > apicid : 0 > initial apicid : 0 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 5 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov > pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp > lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm > extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt > bogomips : 3956.73 > clflush size : 64 > power management: ts ttp tm stc 100mhzsteps hwpstate > > processor : 1 > vendor_id : AuthenticAMD > cpu family : 16 > model : 4 > model name : AMD Processor model unknown > stepping : 2 > cpu MHz : 3000.306 > cache size : 512 KB > physical id : 0 > siblings : 4 > core id : 2 > cpu cores : 4 > apicid : 2 > initial apicid : 2 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 5 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov > pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp > lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm > extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt > bogomips : 6000.60 > clflush size : 64 > power management: ts ttp tm stc 100mhzsteps hwpstate > > processor : 2 > vendor_id : AuthenticAMD > cpu family : 16 > model : 4 > model name : AMD Processor model unknown > stepping : 2 > cpu MHz : 3000.306 > cache size : 512 KB > physical id : 0 > siblings : 4 > core id : 1 > cpu cores : 4 > apicid : 1 > initial apicid : 1 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 5 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov > pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp > lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm > extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt > bogomips : 6000.47 > clflush size : 64 > power management: ts ttp tm stc 100mhzsteps hwpstate > > processor : 3 > vendor_id : AuthenticAMD > cpu family : 16 > model : 4 > model name : AMD Processor model unknown > stepping : 2 > cpu MHz : 3000.306 > cache size : 512 KB > physical id : 0 > siblings : 4 > core id : 3 > cpu cores : 4 > apicid : 3 > initial apicid : 3 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 5 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov > pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp > lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm > extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt > bogomips : 6000.47 > clflush size : 64 > power management: ts ttp tm stc 100mhzsteps hwpstate > > > dmesg: > > Initializing cgroup subsys cpuset > Linux version 2.6.26.8-lcrs (root@harley) (gcc version 4.3.1 20080507 > (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat > Jan 17 16:37:58 EST 2009 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f400 (usable) > BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable) > BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS) > BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data) > BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) > BIOS-e820: 0000000100000000 - 0000000140000000 (usable) > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > Warning only 4GB will be used. > Use a HIGHMEM64G enabled kernel. > 3264MB HIGHMEM available. > 832MB LOWMEM available. > found SMP MP-table at [c00f3f00] 000f3f00 > Entering add_active_range(0, 0, 1048576) 0 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 212992 > HighMem 212992 -> 1048576 > Movable zone start PFN for each node > early_node_map[1] active PFN ranges > 0: 0 -> 1048576 > On node 0 totalpages: 1048576 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 1632 pages used for memmap > Normal zone: 207264 pages, LIFO batch:31 > HighMem zone: 6528 pages used for memmap > HighMem zone: 829056 pages, LIFO batch:31 > Movable zone: 0 pages used for memmap > DMI 2.5 present. > ACPI: RSDP 000F7FB0, 0024 (r2 RX780 ) > ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0) > ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0) > ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E) > ACPI: FACS BFFE0000, 0040 > ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1) > ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98) > ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0) > ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0) > ATI board detected. Disabling timer routing over 8254. > ACPI: PM-Timer IO Port: 0x4008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) > ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > ACPI: HPET id: 0x10b9a201 base: 0xfed00000 > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) > SMP: Allowing 4 CPUs, 0 hotplug CPUs > PERCPU: Allocating 38788 bytes of per cpu data > NR_CPUS: 32, nr_cpu_ids: 4 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384 > Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0 > noresume splash=silent bigphysarea=0x4000 vmalloc=192M vga=0x317 > mapped APIC to ffffb000 (fee00000) > mapped IOAPIC to ffffa000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > Preemptible RCU implementation. > PID hash table entries: 4096 (order: 12, 16384 bytes) > Detected 3000.306 MHz processor. > Console: colour dummy device 80x25 > console [tty0] enabled > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 3031940k/4194304k available (1748k kernel code, 112564k reserved, 732k > data, 216k init, 2293632k highmem) > virtual kernel memory layout: > fixmap : 0xffe15000 - 0xfffff000 (1960 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB) > lowmem : 0xc0000000 - 0xf4000000 ( 832 MB) > .init : 0xc0373000 - 0xc03a9000 ( 216 kB) > .data : 0xc02b5336 - 0xc036c6d0 ( 732 kB) > .text : 0xc0100000 - 0xc02b5336 (1748 kB) > Checking if this processor honours the WP bit even in supervisor mode...Ok. > > > The 2.6.26.8 kernel hangs up right here. > > > CPA: page pool initialized 1 of 1 pages preallocated > SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > hpet clockevent registered > calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy. > Probably due to long platform interrupts. Consider using "lpj=" boot option. > Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472) > Security Framework initialized > Capability LSM initialized > Mount-cache hash table entries: 512 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU 0(4) -> Core 0 > Checking 'hlt' instruction... OK. > ACPI: Core revision 20080321 > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: AMD Processor model unknown stepping 02 > Booting processor 1/1 ip 2000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU 1(4) -> Core 2 > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: AMD Processor model unknown stepping 02 > Booting processor 2/2 ip 2000 > Initializing CPU#2 > Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU 2(4) -> Core 1 > x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 > CPU2: AMD Processor model unknown stepping 02 > Booting processor 3/3 ip 2000 > Initializing CPU#3 > Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU 3(4) -> Core 3 > x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 > CPU3: AMD Processor model unknown stepping 02 > Brought up 4 CPUs > Total of 4 processors activated (21958.28 BogoMIPS). > net_namespace: 660 bytes > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > PCI: MCFG area at e0000000 reserved in E820 > PCI: Using MMCONFIG for extended config space > PCI: Using configuration type 1 for base access > Setting up standard PCI resources > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:12.0: set SATA to AHCI mode > PCI: Transparent bridge - 0000:00:14.4 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp 00:0d: mem resource (0xfed00000-0xfed000ff) overlaps 0000:00:00.0 BAR 3 > (0xe0000000-0xffffffff), disabling > pnp 00:0d: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3 > (0xe0000000-0xffffffff), disabling > pnp 00:0d: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3 > (0xe0000000-0xffffffff), disabling > pnp 00:0d: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3 > (0xe0000000-0xffffffff), disabling > pnp 00:0d: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3 > (0xe0000000-0xffffffff), disabling > pnp: PnP ACPI: found 14 devices > ACPI: ACPI bus type pnp unregistered > PnPBIOS: Disabled by ACPI PNP > PCI: Using ACPI for IRQ routing > PCI: Cannot allocate resource region 3 of device 0000:00:00.0 > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 > hpet0: 4 32-bit timers, 14318180 Hz > ACPI: RTC can wake from S4 > Switched to high resolution mode on CPU 0 > Switched to high resolution mode on CPU 2 > Switched to high resolution mode on CPU 1 > Switched to high resolution mode on CPU 3 > system 00:01: ioport range 0x4100-0x411f has been reserved > system 00:01: ioport range 0x228-0x22f has been reserved > system 00:01: ioport range 0x40b-0x40b has been reserved > system 00:01: ioport range 0x4d6-0x4d6 has been reserved > system 00:01: ioport range 0xc00-0xc01 has been reserved > system 00:01: ioport range 0xc14-0xc14 has been reserved > system 00:01: ioport range 0xc50-0xc52 has been reserved > system 00:01: ioport range 0xc6c-0xc6d has been reserved > system 00:01: ioport range 0xc6f-0xc6f has been reserved > system 00:01: ioport range 0xcd0-0xcd1 has been reserved > system 00:01: ioport range 0xcd2-0xcd3 has been reserved > system 00:01: ioport range 0xcd4-0xcdf has been reserved > system 00:01: ioport range 0x4000-0x40fe has been reserved > system 00:01: ioport range 0x4210-0x4217 has been reserved > system 00:01: ioport range 0xb10-0xb1f has been reserved > system 00:07: ioport range 0x4d0-0x4d1 has been reserved > system 00:07: ioport range 0x220-0x225 has been reserved > system 00:0d: iomem range 0xf0000-0xfffff could not be reserved > system 00:0d: iomem range 0x0-0x1fffff could not be reserved > system 00:0d: iomem range 0xbffe0000-0xbfffffff could not be reserved > system 00:0d: iomem range 0x0-0x9ffff could not be reserved > system 00:0d: iomem range 0x100000-0xbffdffff could not be reserved > PCI: Bridge: 0000:00:02.0 > IO window: d000-dfff > MEM window: 0xf8000000-0xfbffffff > PREFETCH window: 0x00000000c0000000-0x00000000dfffffff > PCI: Bridge: 0000:00:04.0 > IO window: c000-cfff > MEM window: 0xfdc00000-0xfdcfffff > PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff > PCI: Bridge: 0000:00:06.0 > IO window: b000-bfff > MEM window: 0xfda00000-0xfdafffff > PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff > PCI: Bridge: 0000:00:07.0 > IO window: e000-efff > MEM window: 0xfde00000-0xfdefffff > PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff > PCI: Bridge: 0000:00:14.4 > IO window: a000-afff > MEM window: 0xfd900000-0xfd9fffff > PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff > ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:02.0 to 64 > ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:04.0 to 64 > ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:06.0 to 64 > ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:07.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > NET: Registered protocol family 1 > Unpacking initramfs... done > Freeing initrd memory: 10039k freed > audit: initializing netlink socket (disabled) > type=2000 audit(1232260163.932:1): initialized > highmem bounce pool size: 64 pages > Total HugeTLB memory allocated, 0 > bigphysarea: Allocated 16384 pages at 0xc3038000. > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > msgmni has been set to 1462 > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > pci 0000:01:00.0: Boot video device > PCI: Setting latency timer of device 0000:00:02.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:02.0:pcie00] > PCI: Setting latency timer of device 0000:00:04.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:04.0:pcie00] > PCI: Setting latency timer of device 0000:00:06.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:06.0:pcie00] > PCI: Setting latency timer of device 0000:00:07.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:07.0:pcie00] > vesafb: framebuffer at 0xf9000000, mapped to 0xf4880000, using 3072k, total 14336k > vesafb: mode is 1024x768x16, linelength=2048, pages=1 > vesafb: protected mode interface info at c000:b0a0 > vesafb: pmi: set display start = c00cb103, set palette = c00cb15e > vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 > 3d1 3d2 3d3 3d4 3d5 3da > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > Console: switching to colour frame buffer device 128x48 > fb0: VESA VGA frame buffer device > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > hpet_resources: 0xfed00000 is busy > Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > input: AT Translated Set 2 keyboard as /class/input/input0 > input: PC Speaker as /class/input/input1 > logips2pp: Detected unknown logitech mouse model 11 > input: ImPS/2 Logitech Wheel Mouse as /class/input/input2 > Using IPI No-Shortcut mode > Freeing unused kernel memory: 216k freed > No dock devices found. > SCSI subsystem initialized > libata version 3.00 loaded. > pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) > ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:03:00.1 to 64 > scsi0 : pata_jmicron > scsi1 : pata_jmicron > ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 19 > ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 19 > ahci 0000:00:12.0: version 3.0 > ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 > ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit > ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode > ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio > scsi2 : ahci > scsi3 : ahci > scsi4 : ahci > scsi5 : ahci > ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 > ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 > ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 > ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 > ata3: softreset failed (device not ready) > ata3: failed due to HW bug, retry pmp=0 > ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 > ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) > ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > ata3.00: SB600 AHCI: limiting to 255 sectors per cmd > ata3.00: configured for UDMA/133 > ata4: softreset failed (device not ready) > ata4: failed due to HW bug, retry pmp=0 > ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 > ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) > ata4.00: SB600 AHCI: limiting to 255 sectors per cmd > ata4.00: SB600 AHCI: limiting to 255 sectors per cmd > ata4.00: configured for UDMA/133 > ata5: softreset failed (device not ready) > ata5: failed due to HW bug, retry pmp=0 > ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata5.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 > ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) > ata5.00: SB600 AHCI: limiting to 255 sectors per cmd > ata5.00: SB600 AHCI: limiting to 255 sectors per cmd > ata5.00: configured for UDMA/133 > ata6: SATA link down (SStatus 0 SControl 300) > scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 > scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 > scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 > ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode > ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part > PCI: Setting latency timer of device 0000:03:00.0 to 64 > scsi6 : ahci > scsi7 : ahci > ata7: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 18 > ata8: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 18 > ata7: SATA link down (SStatus 0 SControl 300) > ata8: SATA link down (SStatus 0 SControl 300) > Uniform Multi-Platform E-IDE driver > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1 > ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 > SB600_PATA: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xf900-0xf907 > Probing IDE interface ide0... > hda: ST3120023A, ATA DISK drive > hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive > hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hda: UDMA/100 mode selected > hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hdb: UDMA/33 mode selected > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 21 (level, low) -> IRQ 21 > scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 > > aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs > > BIOS EDD facility v0.16 2004-Jun-25, 6 devices found > ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:04:00.0 to 64 > sky2 0000:04:00.0: v1.21 addr 0xfdefc000 irq 19 Yukon-EC Ultra (0xb4) rev 5 > sky2 eth0: addr 00:e0:4d:7a:8c:ee > Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI > Copyright (c) 1999-2006 Intel Corporation. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > Driver 'sd' needs updating - please use bus_type methods > usbcore: registered new device driver usb > sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) > sd 2:0:0:0: [sda] Write Protect is off > sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO > or FUA > ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver > ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16 > ohci_hcd 0000:00:13.0: OHCI Host Controller > ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 > ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 > sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) > sd 2:0:0:0: [sda] Write Protect is off > sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO > or FUA > sda: sda1 sda2 sda3 < sda5<6>usb usb1: configuration #1 chosen from 1 choice > sda6<6>hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > sda7 sda8 sda9 sda10 > > sd 2:0:0:0: [sda] Attached SCSI disk > sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) > sd 3:0:0:0: [sdb] Write Protect is off > sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO > or FUA > sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) > sd 3:0:0:0: [sdb] Write Protect is off > sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO > or FUA > sdb: sdb1 sdb2 sdb3 <<6>usb usb1: New USB device found, idVendor=1d6b, > idProduct=0001 > sdb5<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: OHCI Host Controller > sdb6<6>usb usb1: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd > usb usb1: SerialNumber: 0000:00:13.0 > sdb7<6>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 > ehci_hcd 0000:00:13.5: EHCI Host Controller > ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2 > sdb8<6>ehci_hcd 0000:00:13.5: debug port 1 > ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 > sdb9<6>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb2: configuration #1 chosen from 1 choice > sdb10 > > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 10 ports detected > sd 3:0:0:0: [sdb] Attached SCSI disk > sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) > sd 4:0:0:0: [sdc] Write Protect is off > sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 > sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO > or FUA > sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) > sd 4:0:0:0: [sdc] Write Protect is off > sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 > sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO > or FUA > sdc: sdc1 > sd 4:0:0:0: [sdc] Attached SCSI disk > usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: EHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.26.8-lcrs ehci_hcd > usb usb2: SerialNumber: 0000:00:13.5 > ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 > ohci_hcd 0000:00:13.1: OHCI Host Controller > ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 > ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: OHCI Host Controller > usb usb3: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd > usb usb3: SerialNumber: 0000:00:13.1 > ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 > ohci_hcd 0000:00:13.2: OHCI Host Controller > ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 > ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > usb 2-1: new high speed USB device using ehci_hcd and address 2 > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: OHCI Host Controller > usb usb4: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd > usb usb4: SerialNumber: 0000:00:13.2 > ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 > ohci_hcd 0000:00:13.3: OHCI Host Controller > ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 > ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 > usb 2-1: configuration #1 chosen from 1 choice > usb 2-1: New USB device found, idVendor=03f0, idProduct=5111 > usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > usb 2-1: Product: Photosmart 3200 series > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > usb 2-1: Manufacturer: HP > usb 2-1: SerialNumber: MY5B98310Z045K > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: Product: OHCI Host Controller > usb usb5: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd > usb usb5: SerialNumber: 0000:00:13.3 > ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 > ohci_hcd 0000:00:13.4: OHCI Host Controller > ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 > ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 > usb usb6: configuration #1 chosen from 1 choice > hub 6-0:1.0: USB hub found > hub 6-0:1.0: 2 ports detected > usb 2-2: new high speed USB device using ehci_hcd and address 3 > usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb6: Product: OHCI Host Controller > usb usb6: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd > usb usb6: SerialNumber: 0000:00:13.4 > usb 2-2: configuration #1 chosen from 1 choice > hub 2-2:1.0: USB hub found > hub 2-2:1.0: 4 ports detected > usb 2-2: New USB device found, idVendor=0424, idProduct=2504 > usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda5, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > sd 2:0:0:0: Attached scsi generic sg0 type 0 > sd 3:0:0:0: Attached scsi generic sg1 type 0 > sd 4:0:0:0: Attached scsi generic sg2 type 0 > hda: max request size: 128KiB > hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63 > hda: cache flushes supported > hda: hda1 > e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 > e1000e: Copyright (c) 1999-2008 Intel Corporation. > ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:02:00.0 to 64 > Linux agpgart interface v0.103 > eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:0f:09:1b > eth1: Intel(R) PRO/1000 Network Connection > eth1: MAC: 1, PHY: 4, PBA No: d50854-003 > usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5111 > usbcore: registered new interface driver usblp > Initializing USB Mass Storage driver... > scsi9 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 2 > usb-storage: waiting for device to settle before scanning > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > IT8718 SuperIO detected. > parport_pc 00:0a: reported by Plug and Play ACPI > parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] > piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device > hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache > Uniform CD-ROM driver Revision: 3.20 > rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month > ppdev: user-space parallel port driver > nvidia: module license 'NVIDIA' taints kernel. > ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 > hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... > ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4 > (0x14/0x15/0x16/0x17/0x0) > ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) > ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0 > ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x19, line=0x1a, > fline=0x0, cd=0x0, aux=0x0 > ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:01:00.0 to 64 > NVRM: loading NVIDIA UNIX x86 Kernel Module 177.82 Tue Nov 4 13:35:57 PST 2008 > Adding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:8393952k > device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com > scsi 9:0:0:0: Direct-Access HP Photosmart 3210 1.00 PQ: 0 ANSI: 2 > sd 9:0:0:0: [sdd] Attached SCSI removable disk > sd 9:0:0:0: Attached scsi generic sg3 type 0 > usb-storage: device scan complete > loop: module loaded > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda6, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda7, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda8, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda9, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda10, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on hda1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sdc1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > fuse init (API version 7.9) > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > ip6_tables: (C) 2000-2006 Netfilter Core Team > ip_tables: (C) 2000-2006 Netfilter Core Team > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > sky2 eth0: enabling interface > ADDRCONF(NETDEV_UP): eth0: link is not ready > ADDRCONF(NETDEV_UP): eth1: link is not ready > sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both > ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > eth0: no IPv6 routers present > NET: Registered protocol family 4 > NET: Registered protocol family 3 > NET: Registered protocol family 5 > hda-intel: Invalid position buffer, using LPIB read method instead. > > > > > Using a 2.6.28 kernel the dmesg is slightly different and it seems to get a > little further. The last line on the screen is > > Using C1E aware idle routine. > > The BIOS on my MB doesn't recognize the processor type either BTW. At post it > says it an AMD processor type undefined. > > Regards > Mark > > > > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/