Return-Path: <linux-kernel-owner+w=401wt.eu-S1764053AbZAUM2D@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1764053AbZAUM2D (ORCPT <rfc822;w@1wt.eu>);
	Wed, 21 Jan 2009 07:28:03 -0500
Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1757975AbZAUM1x
	(ORCPT <rfc822;linux-kernel-outgoing>);
	Wed, 21 Jan 2009 07:27:53 -0500
Received: from mail-ew0-f20.google.com ([209.85.219.20]:46746 "EHLO
	mail-ew0-f20.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1757943AbZAUM1u (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Wed, 21 Jan 2009 07:27:50 -0500
DomainKey-Signature: a=rsa-sha1; c=nofws;
        d=gmail.com; s=gamma;
        h=mime-version:sender:reply-to:in-reply-to:references:date
         :x-google-sender-auth:message-id:subject:from:to:content-type
         :content-transfer-encoding;
        b=wKKeCCU2m/c7NP+T6rccDseSvld/zHHvqHILZKfRBzLWAAGi6gmejQzFZYkUoP/Kwz
         YfcSrPLIyUJ81AmsGJPqii3/SSD4afcMJaYFhiOUeoHrCIgwmgo4X5zkeieZ4OJ5jKkp
         nD8EbYuty0hn4GcThqrbMWk1wCVJqW/TPf0UE=
MIME-Version: 1.0
Reply-To: kerolasa@gmail.com
In-Reply-To: <a6f8318b0901210358w7cced8e9yab86c487b3587d75@mail.gmail.com>
References: <a6f8318b0901210358w7cced8e9yab86c487b3587d75@mail.gmail.com>
Date: Wed, 21 Jan 2009 13:27:48 +0100
X-Google-Sender-Auth: fcb57d51e5b84f77
Message-ID: <a6f8318b0901210427o33af879byd352adaf5fde1c29@mail.gmail.com>
Subject: PROBLEM: kernel BUG at drivers/gpu/drm/drm_fops.c:146!
From: Sami Kerola <kerolasa@iki.fi>
To: linux-kernel@vger.kernel.org
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 32670
Lines: 669

Hi,

I compiled the Torvalds git kernel 2.6.29-rc2-00013 and I got an oops.
The oops happens when ever X starts. Initially I was booting with run
level 5 and it hung. I tried to use run level to 3 and an operating
system started just fine. When I type startx the hung happen again.
Please let me know if you need some more information besides oops from
messages file and lspci output.


Jan 21 08:53:58 lelux kernel: ------------[ cut here ]------------
Jan 21 08:53:58 lelux kernel: kernel BUG at drivers/gpu/drm/drm_fops.c:146!
Jan 21 08:53:58 lelux kernel: invalid opcode: 0000 [#1] SMP
Jan 21 08:53:58 lelux kernel: last sysfs file:
/sys/devices/pci0000:00/0000:00:02.0/drm/card0/dri_library_name
Jan 21 08:53:58 lelux kernel: CPU 0
Jan 21 08:53:58 lelux kernel: Modules linked in: i915 drm i2c_algo_bit
ipv6 fuse acpi_cpufreq dm_multipath snd_hda_codec_idt arc4 ecb
snd_hda_intel snd_hda_codec iwlag
n snd_hwdep snd_seq_dummy snd_seq_oss iwlcore snd_seq_midi_event
snd_seq rfkill snd_seq_device lib80211 snd_pcm_oss mac80211
snd_mixer_oss snd_pcm firewire_ohci i2c_i8
01 snd_timer firewire_core ppdev snd sr_mod pcspkr joydev yenta_socket
i2c_core video sg iTCO_wdt tg3 rsrc_nonstatic cdrom crc_itu_t
iTCO_vendor_support parport_pc out
put parport libphy soundcore cfg80211 wmi battery snd_page_alloc ac
pata_acpi ata_generic ata_piix libata sd_mod scsi_mod sha256_generic
cbc aes_x86_64 aes_generic dm_
crypt dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod ext3
jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
Jan 21 08:53:58 lelux kernel: Pid: 2902, comm: X Not tainted
2.6.29-rc2-00013-gf3b8436-dirty #1
Jan 21 08:53:58 lelux kernel: RIP: 0010:[<ffffffffa0486f7b>]
[<ffffffffa0486f7b>] drm_open+0x4b7/0x4f0 [drm]
Jan 21 08:53:58 lelux kernel: RSP: 0018:ffff88006ec01cd8  EFLAGS: 00010293
Jan 21 08:53:58 lelux kernel: RAX: ffff88006f8e2100 RBX:
ffff88006f47d060 RCX: 0000000000000000
Jan 21 08:53:58 lelux kernel: RDX: ffff88007a016b90 RSI:
ffff88006ec40000 RDI: ffff88006ec01c28
Jan 21 08:53:58 lelux kernel: RBP: ffff88006ec01d18 R08:
ffff88006ec40760 R09: 00000000000002e7
Jan 21 08:53:58 lelux kernel: R10: ffff88006ec40000 R11:
0000000000000006 R12: 0000000000000000
Jan 21 08:53:58 lelux kernel: R13: ffff88006f47d000 R14:
ffff88006f47d060 R15: ffff88006ec33918
Jan 21 08:53:58 lelux kernel: FS:  00007f4495429780(0000)
GS:ffffffff8192e000(0000) knlGS:0000000000000000
Jan 21 08:53:58 lelux kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Jan 21 08:53:58 lelux kernel: CR2: 00007f4494de01a0 CR3:
0000000070460000 CR4: 00000000000006e0
Jan 21 08:53:58 lelux kernel: DR0: 0000000000000000 DR1:
0000000000000000 DR2: 0000000000000000
Jan 21 08:53:58 lelux kernel: DR3: 0000000000000000 DR6:
00000000ffff0ff0 DR7: 0000000000000400
Jan 21 08:53:58 lelux kernel: Process X (pid: 2902, threadinfo
ffff88006ec00000, task ffff88006ec40000)
Jan 21 08:53:58 lelux kernel: Stack:
Jan 21 08:53:58 lelux kernel: ffff88006d071000 ffff88007a016b90
ffff88006d044000 00000000ffffffed
Jan 21 08:53:58 lelux kernel: ffffffffa04959d0 ffff88006d071000
ffff88007a016b90 ffff88007a016b90
Jan 21 08:53:58 lelux kernel: ffff88006ec01d48 ffffffffa0486a53
0000000000000000 ffff88007c9adc00
Jan 21 08:53:58 lelux kernel: Call Trace:
Jan 21 08:53:58 lelux kernel: [<ffffffffa0486a53>]
drm_stub_open+0xd2/0x143 [drm]
Jan 21 08:53:58 lelux kernel: [<ffffffff810df703>] chrdev_open+0x149/0x168
Jan 21 08:53:58 lelux kernel: [<ffffffff8114e8b9>] ?
selinux_dentry_open+0xeb/0xf4
Jan 21 08:53:58 lelux kernel: [<ffffffff810df5ba>] ? chrdev_open+0x0/0x168
Jan 21 08:53:58 lelux kernel: [<ffffffff810db03f>] __dentry_open+0x151/0x270
Jan 21 08:53:58 lelux kernel: [<ffffffff810db235>] nameidata_to_filp+0x46/0x57
Jan 21 08:53:58 lelux kernel: [<ffffffff810e84fb>] do_filp_open+0x44f/0x8a7
Jan 21 08:53:58 lelux kernel: [<ffffffff81065661>] ?
lock_release_holdtime+0x1c/0x173
Jan 21 08:53:58 lelux kernel: [<ffffffff8118a136>] ? _raw_spin_unlock+0x8e/0x94
Jan 21 08:53:58 lelux kernel: [<ffffffff810f14c5>] ? alloc_fd+0x122/0x133
Jan 21 08:53:58 lelux kernel: [<ffffffff810dae22>] do_sys_open+0x58/0xd8
Jan 21 08:53:58 lelux kernel: [<ffffffff810daed5>] sys_open+0x20/0x22
Jan 21 08:53:58 lelux kernel: [<ffffffff8100c42a>]
system_call_fastpath+0x16/0x1b
Jan 21 08:53:58 lelux kernel: Code: 48 89 df e8 55 e4 ea e0 48 8b 45
d0 83 78 04 01 75 2f 49 8b 85 00 06 00 00 48 85 c0 74 11 48 8b 55 c8
48 3b 82 30 02 00 00 74 16 <0f> 0b eb fe 48 8b 55 c8 48 8b 82 30 02 00
00 49 89 85 00 06 00
Jan 21 08:53:58 lelux kernel: RIP  [<ffffffffa0486f7b>]
drm_open+0x4b7/0x4f0 [drm]
Jan 21 08:53:58 lelux kernel: RSP <ffff88006ec01cd8>
Jan 21 08:53:58 lelux kernel: ---[ end trace 9cfbed5f45e30ada ]---


You might be interested of my hardware so here comes lspci -vvv (taken
when 2.6.27.9-73.fc9.x86_64 was running).


00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory
Controller Hub (rev 0c)
        Subsystem: Dell Unknown device 01f9
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information <?>
        Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation Mobile
GM965/GL960 Integrated Graphics Controller (rev 0c) (prog-if 00 [VGA
controller])
        Subsystem: Dell Latitude D630
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M]
        Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at efe8 [size=8]
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
                Address: 00000000  Data: 0000
        Capabilities: [d0] Power Management version 3
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+
        Kernel modules: intelfb, i915

00:02.1 Display controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (rev 0c)
        Subsystem: Dell Unknown device 01f9
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: [d0] Power Management version 3
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+

00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Unknown device 01f9
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at 6f20 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Unknown device 01f9
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 21
        Region 4: I/O ports at 6f00 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2
EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
        Subsystem: Dell Unknown device 01f9
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 22
        Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 02)
        Subsystem: Dell Dell Latitude D630
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend-
                LnkCap: Port #0, Speed unknown, Width x0, ASPM
unknown, Latency L0 <64ns, L1 <1us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed unknown, Width x0, TrErr- Train-
SlotClk- DLActive- BWMgmt- ABWMgmt-
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [130] Root Complex Link <?>
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: fff00000-000fffff
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <1us, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
HotPlug+ Surpise+
                        Slot #  2, PowerLimit 6.500000; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+
CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown,
Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
PresDet- Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Dell Unknown device 01f9
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [180] Root Complex Link <?>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 2 (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: fe800000-fe8fffff
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend-
                LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled-
Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
SlotClk+ DLActive+ BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
HotPlug+ Surpise+
                        Slot #  3, PowerLimit 6.500000; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+
CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown,
Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
PresDet+ Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Dell Unknown device 01f9
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [180] Root Complex Link <?>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 6 (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: fe700000-fe7fffff
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend-
                LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
SlotClk+ DLActive+ BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
HotPlug+ Surpise+
                        Slot #  3, PowerLimit 6.500000; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+
CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown,
Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
PresDet+ Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Dell Unknown device 01f9
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [180] Root Complex Link <?>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Unknown device 01f9
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at 6f80 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Unknown device 01f9
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 21
        Region 4: I/O ports at 6f60 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Unknown device 01f9
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 22
        Region 4: I/O ports at 6f40 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2
EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
        Subsystem: Dell Unknown device 01f9
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
(prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: fe600000-fe6fffff
        Prefetchable memory behind bridge: 0000000088000000-000000008bffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ <SERR- <PERR+
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Subsystem: Dell Unknown device 01f9

00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface
Controller (rev 02)
        Subsystem: Dell Unknown device 01f9
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information <?>
        Kernel modules: iTCO_wdt

00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: Dell Unknown device 01f9
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 6fa0 [size=16]
        Kernel driver in use: ata_piix
        Kernel modules: pata_acpi, ata_generic, ata_piix

00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: Dell Unknown device 01f9
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 0: I/O ports at 6eb0 [size=8]
        Region 1: I/O ports at 6eb8 [size=4]
        Region 2: I/O ports at 6ec0 [size=8]
        Region 3: I/O ports at 6ec8 [size=4]
        Region 4: I/O ports at 6ee0 [size=16]
        Region 5: I/O ports at eff0 [size=16]
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: ata_piix
        Kernel modules: pata_acpi, ata_generic, ata_piix

00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
        Subsystem: Dell Unknown device 01f9
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at fe9fbf00 (32-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 10c0 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c-i801

03:01.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 21)
        Subsystem: Dell Unknown device 01f9
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 168
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at fe600000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
        Memory window 0: 88000000-8bfff000 (prefetchable)
        Memory window 1: 8c000000-8ffff000
        I/O window 0: 00002000-000020ff
        I/O window 1: 00002400-000024ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001
        Kernel driver in use: yenta_cardbus
        Kernel modules: yenta_socket

03:01.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev
02) (prog-if 10 [OHCI])
        Subsystem: Dell Unknown device 01f9
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=4K]
        Region 1: Memory at fe6fe800 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME+
        Kernel driver in use: firewire_ohci
        Kernel modules: firewire-ohci

09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M
Gigabit Ethernet PCI Express (rev 02)
        Subsystem: Dell Unknown device 01f9
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at fe7f0000 (64-bit, non-prefetchable) [size=64K]
        Expansion ROM at <ignored> [disabled]
        Capabilities: [48] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [50] Vital Product Data <?>
        Capabilities: [58] Vendor Specific Information <?>
        Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
                Address: e767ffbbad8bdbfc  Data: fffa
        Capabilities: [d0] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<4us, L1 unlimited
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 4096 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <4us, L1 <64us
                        ClockPM+ Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [100] Advanced Error Reporting <?>
        Capabilities: [13c] Virtual Channel <?>
        Capabilities: [160] Device Serial Number 39-9e-37-fe-ff-23-1c-00
        Capabilities: [16c] Power Budgeting <?>
        Kernel driver in use: tg3
        Kernel modules: tg3

0c:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or
AGN Network Connection (rev 61)
        Subsystem: Intel Corporation Unknown device 1121
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at fe8fe000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: [c8] Power Management version 3
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<512ns, L1 unlimited
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <128ns, L1 <64us
                        ClockPM+ Suprise- LLActRep- BwNot-
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled-
Retrain- CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [100] Advanced Error Reporting <?>
        Capabilities: [140] Device Serial Number 43-97-1e-ff-ff-3b-1f-00
        Kernel driver in use: iwlagn
        Kernel modules: iwlagn

-- 
   Sami Kerola
   http://www.iki.fi/kerolasa/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/