Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758977AbZAXSms (ORCPT ); Sat, 24 Jan 2009 13:42:48 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1758601AbZAXSme (ORCPT ); Sat, 24 Jan 2009 13:42:34 -0500 Received: from einhorn.in-berlin.de ([192.109.42.8]:57544 "EHLO einhorn.in-berlin.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758478AbZAXSmd (ORCPT ); Sat, 24 Jan 2009 13:42:33 -0500 X-Envelope-From: stefanr@s5r6.in-berlin.de Date: Sat, 24 Jan 2009 19:42:21 +0100 (CET) From: Stefan Richter Subject: [PATCH 1/7] firewire: sbp2: fix payload limit at S1600 and S3200 To: linux1394-devel@lists.sourceforge.net cc: linux-kernel@vger.kernel.org In-Reply-To: Message-ID: References: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=us-ascii Content-Disposition: INLINE Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2899 Lines: 78 1394-2008 clause 16.3.4.1 (1394b-2002 clause 16.3.1.1) defines tighter limits than 1394-2008 clause 6.2.2.3 (1394a-2000 clause 6.2.2.3). Our previously too large limit doesn't matter though if the controller reports its max_receive correctly. Signed-off-by: Stefan Richter --- drivers/firewire/fw-sbp2.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) Index: linux/drivers/firewire/fw-sbp2.c =================================================================== --- linux.orig/drivers/firewire/fw-sbp2.c +++ linux/drivers/firewire/fw-sbp2.c @@ -168,6 +168,7 @@ struct sbp2_target { int address_high; unsigned int workarounds; unsigned int mgt_orb_timeout; + unsigned int max_payload; int dont_block; /* counter for each logical unit */ int blocked; /* ditto */ @@ -1150,6 +1151,15 @@ static int sbp2_probe(struct device *dev sbp2_init_workarounds(tgt, model, firmware_revision); + /* + * At S100 we can do 512 bytes per packet, at S200 1024 bytes, + * and so on up to 4096 bytes. The SBP-2 max_payload field + * specifies the max payload size as 2 ^ (max_payload + 2), so + * if we set this to max_speed + 7, we get the right value. + */ + tgt->max_payload = min(device->max_speed + 7, 10U); + tgt->max_payload = min(tgt->max_payload, device->card->max_receive - 1); + /* Do the login in a workqueue so we can easily reschedule retries. */ list_for_each_entry(lu, &tgt->lu_list, link) sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5)); @@ -1426,7 +1436,6 @@ static int sbp2_scsi_queuecommand(struct struct sbp2_logical_unit *lu = cmd->device->hostdata; struct fw_device *device = fw_device(lu->tgt->unit->device.parent); struct sbp2_command_orb *orb; - unsigned int max_payload; int generation, retval = SCSI_MLQUEUE_HOST_BUSY; /* @@ -1454,17 +1463,9 @@ static int sbp2_scsi_queuecommand(struct orb->done = done; orb->cmd = cmd; - orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL); - /* - * At speed 100 we can do 512 bytes per packet, at speed 200, - * 1024 bytes per packet etc. The SBP-2 max_payload field - * specifies the max payload size as 2 ^ (max_payload + 2), so - * if we set this to max_speed + 7, we get the right value. - */ - max_payload = min(device->max_speed + 7, - device->card->max_receive - 1); + orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL); orb->request.misc = cpu_to_be32( - COMMAND_ORB_MAX_PAYLOAD(max_payload) | + COMMAND_ORB_MAX_PAYLOAD(lu->tgt->max_payload) | COMMAND_ORB_SPEED(device->max_speed) | COMMAND_ORB_NOTIFY); -- Stefan Richter -=====-==--= ---= ==--- http://arcgraph.de/sr/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/