Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754076AbZAZTNh (ORCPT ); Mon, 26 Jan 2009 14:13:37 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752438AbZAZTNZ (ORCPT ); Mon, 26 Jan 2009 14:13:25 -0500 Received: from earthlight.etchedpixels.co.uk ([81.2.110.250]:43313 "EHLO lxorguk.ukuu.org.uk" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752029AbZAZTNY (ORCPT ); Mon, 26 Jan 2009 14:13:24 -0500 Date: Mon, 26 Jan 2009 19:11:51 +0000 From: Alan Cox To: Hugh Dickins Cc: Jeff Garzik , "Rafael J. Wysocki" , linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: 2.6.29-rc libata sff 32bit PIO regression Message-ID: <20090126191151.18b094e6@lxorguk.ukuu.org.uk> In-Reply-To: References: X-Mailer: Claws Mail 3.5.0 (GTK+ 2.12.12; x86_64-redhat-linux-gnu) Organization: Red Hat UK Cyf., Amberley Place, 107-111 Peascod Street, Windsor, Berkshire, SL4 1TE, Y Deyrnas Gyfunol. Cofrestrwyd yng Nghymru a Lloegr o'r rhif cofrestru 3798903 Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5609 Lines: 187 > [PATCH] libata sff: 32bit PIO use 16bit on slop > > 871af1210f13966ab911ed2166e4ab2ce775b99d libata: Add 32bit PIO support > causes errors on a four-year-old ata_piix Dell Precision 670. Using > 16bit PIO instead of 32bit PIO on the odd 1, 2 or 3 chars fixes that. > > Signed-off-by: Hugh Dickins For the 3 bytes of slop it should use a single iowrite32 but otherwise that seems ok. We do need to handle the FIFO setup on the AMD differently if we do this - something like this: pata_amd: Program FIFO From: Alan Cox With 32bit PIO we can use the posted write buffers, but only for 32bit I/O cycles. This means we must disable the FIFO for ATAPI where a final 16bit cycle may occur. Rework the FIFO logic so that we disable the FIFO then selectively re-enable it when we set the timings on AMD devices. Also fix a case where we scribbled on PCI config 0x41 of Nvidia chips when we shouldn't. Signed-off-by: Alan Cox --- drivers/ata/pata_amd.c | 78 +++++++++++++++++++++++++++++++++++++----------- 1 files changed, 60 insertions(+), 18 deletions(-) diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 63719ab..c380a4e 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -24,7 +24,7 @@ #include #define DRV_NAME "pata_amd" -#define DRV_VERSION "0.3.11" +#define DRV_VERSION "0.4.1" /** * timing_setup - shared timing computation and load @@ -145,6 +145,13 @@ static int amd_pre_reset(struct ata_link *link, unsigned long deadline) return ata_sff_prereset(link, deadline); } +/** + * amd_cable_detect - report cable type + * @ap: port + * + * AMD controller/BIOS setups record the cable type in word 0x42 + */ + static int amd_cable_detect(struct ata_port *ap) { static const u32 bitmask[2] = {0x03, 0x0C}; @@ -158,6 +165,40 @@ static int amd_cable_detect(struct ata_port *ap) } /** + * amd_fifo_setup - set the PIO FIFO for ATA/ATAPI + * @ap: ATA interface + * @adev: ATA device + * + * Set the PCI fifo for this device according to the devices present + * on the bus at this point in time. We need to turn the post write buffer + * off for ATAPI devices as we may need to issue a word sized write to the + * device as the final I/O + */ + +static void amd_fifo_setup(struct ata_port *ap) +{ + struct ata_device *adev; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const u8 fifobit[2] = { 0xC0, 0x30}; + u8 fifo = fifobit[ap->port_no]; + u8 r; + + + ata_for_each_dev(adev, &ap->link, ENABLED) { + if (adev->class == ATA_DEV_ATAPI) + fifo = 0; + } + if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) /* FIFO is broken */ + fifo = 0; + + /* On the later chips the read prefetch bits become no-op bits */ + pci_read_config_byte(pdev, 0x41, &r); + r &= ~fifobit[ap->port_no]; + r |= fifo; + pci_write_config_byte(pdev, 0x41, r); +} + +/** * amd33_set_piomode - set initial PIO mode data * @ap: ATA interface * @adev: ATA device @@ -167,21 +208,25 @@ static int amd_cable_detect(struct ata_port *ap) static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 1); } static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 2); } static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 3); } static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 4); } @@ -397,6 +442,16 @@ static struct ata_port_operations nv133_port_ops = { .set_dmamode = nv133_set_dmamode, }; +static void amd_clear_fifo(struct pci_dev *pdev) +{ + u8 fifo; + /* Disable the FIFO, the FIFO logic will re-enable it as + appropriate */ + pci_read_config_byte(pdev, 0x41, &fifo); + fifo &= 0x0F; + pci_write_config_byte(pdev, 0x41, fifo); +} + static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info[10] = { @@ -503,14 +558,8 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (type < 3) ata_pci_bmdma_clear_simplex(pdev); - - /* Check for AMD7411 */ - if (type == 3) - /* FIFO is broken */ - pci_write_config_byte(pdev, 0x41, fifo & 0x0F); - else - pci_write_config_byte(pdev, 0x41, fifo | 0xF0); - + if (pdev->vendor == PCI_VENDOR_ID_AMD) + amd_clear_fifo(pdev); /* Cable detection on Nvidia chips doesn't work too well, * cache BIOS programmed UDMA mode. */ @@ -534,20 +583,13 @@ static int amd_reinit_one(struct pci_dev *pdev) rc = ata_pci_device_do_resume(pdev); if (rc) return rc; - + if (pdev->vendor == PCI_VENDOR_ID_AMD) { - u8 fifo; - pci_read_config_byte(pdev, 0x41, &fifo); - if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) - /* FIFO is broken */ - pci_write_config_byte(pdev, 0x41, fifo & 0x0F); - else - pci_write_config_byte(pdev, 0x41, fifo | 0xF0); + amd_clear_fifo(pdev); if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 || pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401) ata_pci_bmdma_clear_simplex(pdev); } - ata_host_resume(host); return 0; } -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/