Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756012AbZA0Sic (ORCPT ); Tue, 27 Jan 2009 13:38:32 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1755489AbZA0SiX (ORCPT ); Tue, 27 Jan 2009 13:38:23 -0500 Received: from mx33.mail.ru ([194.67.23.194]:28660 "EHLO mx33.mail.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753133AbZA0SiS (ORCPT ); Tue, 27 Jan 2009 13:38:18 -0500 From: Andrey Borzenkov To: linux-fbdev-devel@lists.sourceforge.net, adaplas@gmail.com Subject: [2.6.29-rc2] fb_mmap: circular locking dependency on hibernation Date: Tue, 27 Jan 2009 21:37:53 +0300 User-Agent: KMail/1.11.0 (Linux/2.6.29-rc2-1avb; KDE/4.1.96; i686; ; ) Cc: linux-kernel@vger.kernel.org, linux-pm@lists.linux-foundation.org MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart1398193.r780PQfP9Y"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200901272137.57757.arvidjaar@mail.ru> X-Spam: Not detected X-Mras: Ok Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 150052 Lines: 4164 --nextPart1398193.r780PQfP9Y Content-Type: multipart/mixed; boundary="Boundary-01=_FS1fJSZ8SIevdLG" Content-Transfer-Encoding: 7bit Content-Disposition: inline --Boundary-01=_FS1fJSZ8SIevdLG Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline I do not know if this is new; I usually do not hibernate at all and was=20 testing another driver actually. I do not remember such issues in 2.6.28=20 though. Dmesg follows; config attached. [ 0.000000] Linux version 2.6.29-rc2-1avb (bor@cooker) (gcc version 4.3.= 2=20 (GCC) ) #11 Tue Jan 20 19:30:32 MSK 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] PAT WC disabled due to known CPU erratum. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved) [ 0.000000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ef60000 (usable) [ 0.000000] BIOS-e820: 000000001ef60000 - 000000001ef70000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ef70000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn =3D 0x1ef60 max_arch_pfn =3D 0x100000 [ 0.000000] kernel direct mapping tables up to 1ef60000 @ 7000-d000 [ 0.000000] RAMDISK: 1ebcf000 - 1ef4f86c [ 0.000000] ACPI: RSDP 000F0090, 0014 (r0 TOSHIB) [ 0.000000] ACPI: RSDT 1EF60000, 0028 (r1 TOSHIB 750 970814 TASM = =20 4010000) [ 0.000000] ACPI: FACP 1EF60054, 0084 (r2 TOSHIB 750 970814 TASM = =20 4010000) [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match=20 PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT 1EF600D8, 68DA (r1 TOSHIB 4000 20020417 MSFT = =20 100000A) [ 0.000000] ACPI: FACS 000EEE00, 0040 [ 0.000000] 495MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1ef60000 [ 0.000000] low ram: 00000000 - 1ef60000 [ 0.000000] bootmap 00001000 - 00004dec [ 0.000000] (7 early reservations) =3D=3D> bootmem [0000000000 - 001ef60= 000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page =3D=3D>=20 [0000000000 - 0000001000] [ 0.000000] #1 [0000100000 - 0000973d98] TEXT DATA BSS =3D=3D>=20 [0000100000 - 0000973d98] [ 0.000000] #2 [001ebcf000 - 001ef4f86c] RAMDISK =3D=3D>=20 [001ebcf000 - 001ef4f86c] [ 0.000000] #3 [0000974000 - 0000978000] INIT_PG_TABLE =3D=3D>=20 [0000974000 - 0000978000] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved =3D=3D>=20 [000009fc00 - 0000100000] [ 0.000000] #5 [0000007000 - 0000009000] PGTABLE =3D=3D>=20 [0000007000 - 0000009000] [ 0.000000] #6 [0000001000 - 0000005000] BOOTMAP =3D=3D>=20 [0000001000 - 0000005000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001ef60 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001ef60 [ 0.000000] On node 0 totalpages: 126719 [ 0.000000] free_area_init_node: node 0, pgdat c03caa00, node_mem_map=20 c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 959 pages used for memmap [ 0.000000] Normal zone: 121761 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xee08 [ 0.000000] PM: Registered nosave memory: 000000000009f000 -=20 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -=20 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 -=20 00000000000ee000 [ 0.000000] PM: Registered nosave memory: 00000000000ee000 -=20 00000000000ef000 [ 0.000000] PM: Registered nosave memory: 00000000000ef000 -=20 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap:=20 20000000:dff80000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Tota= l=20 pages: 125728 [ 0.000000] Kernel command line: BOOT_IMAGE=3D2.6.29-rc2-1avb root=3DLAB= EL=3D/=20 resume=3DLABEL=3Dswap acpi_backlight=3Dvendor=20 netconsole=3D@10.0.0.1/eth0,@10.0.0.2/00:17:42:21:27:e4 vga=3D791 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] CPU 0 irqstacks, hard=3Dc0414000 soft=3Dc0413000 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 747.638 MHz processor. [ 0.003333] Console: colour dummy device 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,= =20 Ingo Molnar [ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003333] ... MAX_LOCK_DEPTH: 48 [ 0.003333] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003333] ... CLASSHASH_SIZE: 4096 [ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192 [ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384 [ 0.003333] ... CHAINHASH_SIZE: 8192 [ 0.003333] memory used by lock dependency info: 2591 kB [ 0.003333] per task-struct memory footprint: 1920 bytes [ 0.003333] ------------------------ [ 0.003333] | Locking API testsuite: [ 0.003333]=20 =2D------------------------------------------------------------------------= =2D-- [ 0.003333] | spin |wlock |rlock |mutex= =20 | wsem | rsem | [ 0.003333] =20 =2D------------------------------------------------------------------------- [ 0.003333] A-A deadlock: ok | ok | ok | ok = =20 | ok | ok | [ 0.003333] A-B-B-A deadlock: ok | ok | ok | ok = =20 | ok | ok | [ 0.003333] A-B-B-C-C-A deadlock: ok | ok | ok | ok = =20 | ok | ok | [ 0.003333] A-B-C-A-B-C deadlock: ok | ok | ok | ok = =20 | ok | ok | [ 0.003333] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok = =20 | ok | ok | [ 0.003333] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok = =20 | ok | ok | [ 0.003333] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok = =20 | ok | ok | [ 0.003333] double unlock: ok | ok | ok | ok = =20 | ok | ok | [ 0.003333] initialize held: ok | ok | ok | ok = =20 | ok | ok | [ 0.003333] bad unlock order: ok | ok | ok | ok = =20 | ok | ok | [ 0.003333] =20 =2D------------------------------------------------------------------------- [ 0.003333] recursive read-lock: | ok | = =20 | ok | [ 0.003333] recursive read-lock #2: | ok | = =20 | ok | [ 0.003333] mixed read-write-lock: | ok | = =20 | ok | [ 0.003333] mixed write-read-lock: | ok | = =20 | ok | [ 0.003333] =20 =2D------------------------------------------------------------------------- [ 0.003333] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.003333] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.003333] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.003333] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.003333] sirq-safe-A =3D> hirqs-on/12: ok | ok | ok | [ 0.003333] sirq-safe-A =3D> hirqs-on/21: ok | ok | ok | [ 0.003333] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.003333] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.003333] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.003333] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/123: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/123: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/132: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/132: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/213: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/213: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/231: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/231: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/312: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/312: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/321: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/321: ok | ok | ok | [ 0.003333] hard-irq read-recursion/123: ok | [ 0.003333] soft-irq read-recursion/123: ok | [ 0.003333] hard-irq read-recursion/132: ok | [ 0.003333] soft-irq read-recursion/132: ok | [ 0.003333] hard-irq read-recursion/213: ok | [ 0.003333] soft-irq read-recursion/213: ok | [ 0.003333] hard-irq read-recursion/231: ok | [ 0.003333] soft-irq read-recursion/231: ok | [ 0.003333] hard-irq read-recursion/312: ok | [ 0.003333] soft-irq read-recursion/312: ok | [ 0.003333] hard-irq read-recursion/321: ok | [ 0.003333] soft-irq read-recursion/321: ok | [ 0.003333] ------------------------------------------------------- [ 0.003333] Good, all 218 testcases passed! | [ 0.003333] --------------------------------- [ 0.003333] Dentry cache hash table entries: 65536 (order: 6, 262144=20 bytes) [ 0.003333] Inode-cache hash table entries: 32768 (order: 5, 131072=20 bytes) [ 0.003333] Memory: 489984k/507264k available (2103k kernel code, 16676k= =20 reserved, 795k data, 232k init, 0k highmem) [ 0.003333] virtual kernel memory layout: [ 0.003333] fixmap : 0xfffed000 - 0xfffff000 ( 72 kB) [ 0.003333] vmalloc : 0xdf760000 - 0xfffeb000 ( 520 MB) [ 0.003333] lowmem : 0xc0000000 - 0xdef60000 ( 495 MB) [ 0.003333] .init : 0xc03d6000 - 0xc0410000 ( 232 kB) [ 0.003333] .data : 0xc030dee5 - 0xc03d4e00 ( 795 kB) [ 0.003333] .text : 0xc0100000 - 0xc030dee5 (2103 kB) [ 0.003333] Checking if this processor honours the WP bit even in=20 supervisor mode...Ok. [ 0.003333] SLUB: Genslabs=3D12, HWalign=3D32, Order=3D0-3, MinObjects= =3D0,=20 CPUs=3D1, Nodes=3D1 [ 0.003387] Calibrating delay loop (skipped), value calculated using=20 timer frequency.. 1495.57 BogoMIPS (lpj=3D2492126) [ 0.003552] Mount-cache hash table entries: 512 [ 0.005949] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.005998] CPU: L2 cache: 256K [ 0.006015] CPU serial number disabled. [ 0.006073] CPU: Intel Pentium III (Coppermine) stepping 0a [ 0.006122] Checking 'hlt' instruction... OK. [ 0.017647] Freeing SMP alternatives: 0k freed [ 0.017668] ACPI: Core revision 20081204 [ 0.046435] ACPI: setting ELCR to 0200 (from 0a00) [ 0.049570] Testing tracer nop: PASSED [ 0.054405] net_namespace: 732 bytes [ 0.056093] NET: Registered protocol family 16 [ 0.059534] ACPI: bus type pci registered [ 0.061588] PCI: PCI BIOS revision 2.10 entry at 0xfe5ae, last bus=3D5 [ 0.061638] PCI: Using configuration type 1 for base access [ 0.072918] bio: create slab at 0 [ 0.083510] ACPI: EC: Look up EC in DSDT [ 0.111712] ACPI: Interpreter enabled [ 0.111777] ACPI: (supports S0 S3 S4 S5) [ 0.112198] ACPI: Using PIC for interrupt routing [ 0.171477] ACPI: ACPI Dock Station Driver: 2 docks/bays found [ 0.171654] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.172771] pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf3ffffff] [ 0.173162] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7eff000-0xf7efffff] [ 0.173362] pci 0000:00:02.0: PME# supported from D3hot D3cold [ 0.173401] pci 0000:00:02.0: PME# disabled [ 0.173569] pci 0000:00:04.0: reg 20 io port: [0xeff0-0xefff] [ 0.173753] pci 0000:00:06.0: reg 10 io port: [0xed00-0xedff] [ 0.173777] pci 0000:00:06.0: reg 14 32bit mmio: [0xf7efe000-0xf7efefff] [ 0.173903] pci 0000:00:06.0: supports D1 D2 [ 0.173911] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold [ 0.173939] pci 0000:00:06.0: PME# disabled [ 0.174346] pci 0000:00:08.0: quirk: region ee00-ee3f claimed by ali7101= =20 ACPI [ 0.174377] pci 0000:00:08.0: quirk: region ef00-ef1f claimed by ali7101= =20 SMB [ 0.174497] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf7efd000-0xf7efdfff] [ 0.174521] pci 0000:00:0a.0: reg 14 io port: [0xeb40-0xeb7f] [ 0.174545] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf7d00000-0xf7dfffff] [ 0.174657] pci 0000:00:0a.0: supports D1 D2 [ 0.174665] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.174694] pci 0000:00:0a.0: PME# disabled [ 0.174822] pci 0000:00:10.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.174882] pci 0000:00:10.0: supports D1 D2 [ 0.174890] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.174919] pci 0000:00:10.0: PME# disabled [ 0.175033] pci 0000:00:11.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.175198] pci 0000:00:11.1: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.175375] pci 0000:00:12.0: reg 10 32bit mmio: [0xf7cffe00-0xf7cfffff] [ 0.175519] pci 0000:00:12.0: supports D1 D2 [ 0.175527] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.175556] pci 0000:00:12.0: PME# disabled [ 0.175744] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfdffffff] [ 0.175768] pci 0000:01:00.0: reg 14 32bit mmio: [0xfbc00000-0xfbffffff] [ 0.175790] pci 0000:01:00.0: reg 18 32bit mmio: [0xf8000000-0xf9ffffff] [ 0.175813] pci 0000:01:00.0: reg 1c 32bit mmio: [0xf7ff8000-0xf7ffffff] [ 0.175859] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.175929] pci 0000:01:00.0: supports D1 D2 [ 0.176064] pci 0000:00:01.0: bridge 32bit mmio: [0xf7f00000-0xfdffffff] [ 0.176270] pci_bus 0000:00: on NUMA node 0 [ 0.176318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.177084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.214680] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11) [ 0.215642] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11) [ 0.216547] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11) [ 0.217589] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11) [ 0.218493] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11) [ 0.219394] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11) [ 0.221045] ACPI: Power Resource [PFAN] (off) [ 0.224275] PCI: Using ACPI for IRQ routing [ 0.227664] pnp: PnP ACPI init [ 0.227664] ACPI: bus type pnp registered [ 0.254556] pnp: PnP ACPI: found 12 devices [ 0.254615] ACPI: ACPI bus type pnp unregistered [ 0.254732] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.254763] system 00:00: iomem range 0xe0000-0xeffff could not be=20 reserved [ 0.254792] system 00:00: iomem range 0xf0000-0xfffff could not be=20 reserved [ 0.254820] system 00:00: iomem range 0x100000-0x1ef5ffff could not be=20 reserved [ 0.254850] system 00:00: iomem range 0x1ef60000-0x1ef6ffff could not be= =20 reserved [ 0.254881] system 00:00: iomem range 0x1f000000-0x1fffffff has been=20 reserved [ 0.254908] system 00:00: iomem range 0x1ef70000-0x1effffff has been=20 reserved [ 0.254939] system 00:00: iomem range 0xffe00000-0xffffffff could not be= =20 reserved [ 0.255031] system 00:08: ioport range 0x370-0x371 has been reserved [ 0.255058] system 00:08: ioport range 0x40b-0x40b has been reserved [ 0.255084] system 00:08: ioport range 0x480-0x48f has been reserved [ 0.255110] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.255135] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.255161] system 00:08: ioport range 0x6c0-0x6ff has been reserved [ 0.255187] system 00:08: ioport range 0xe000-0xe07f has been reserved [ 0.255213] system 00:08: ioport range 0xe080-0xe0ff has been reserved [ 0.255240] system 00:08: ioport range 0xe400-0xe47f has been reserved [ 0.255267] system 00:08: ioport range 0xe480-0xe4ff has been reserved [ 0.255294] system 00:08: ioport range 0xe800-0xe87f has been reserved [ 0.255321] system 00:08: ioport range 0xe880-0xe8ff has been reserved [ 0.255348] system 00:08: ioport range 0xec00-0xec7f has been reserved [ 0.255376] system 00:08: ioport range 0xec80-0xecff has been reserved [ 0.255404] system 00:08: ioport range 0xee00-0xee41 could not be=20 reserved [ 0.255432] system 00:08: ioport range 0xee90-0xee9f has been reserved [ 0.255458] system 00:08: ioport range 0xeeac-0xeeac has been reserved [ 0.255487] system 00:08: ioport range 0xef00-0xef3f could not be=20 reserved [ 0.255514] system 00:08: ioport range 0xef40-0xef5f has been reserved [ 0.294689] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.294746] pci 0000:00:01.0: IO window: disabled [ 0.294778] pci 0000:00:01.0: MEM window: 0xf7f00000-0xfdffffff [ 0.294808] pci 0000:00:01.0: PREFETCH window:=20 0x00000048000000-0x000000480fffff [ 0.294855] pci 0000:00:10.0: CardBus bridge, secondary bus 0000:02 [ 0.294877] pci 0000:00:10.0: IO window: 0x001000-0x0010ff [ 0.294904] pci 0000:00:10.0: IO window: 0x001400-0x0014ff [ 0.294932] pci 0000:00:10.0: PREFETCH window: 0x30000000-0x33ffffff [ 0.294962] pci 0000:00:10.0: MEM window: 0x34000000-0x37ffffff [ 0.294992] pci 0000:00:11.0: CardBus bridge, secondary bus 0000:06 [ 0.295013] pci 0000:00:11.0: IO window: 0x001800-0x0018ff [ 0.295040] pci 0000:00:11.0: IO window: 0x001c00-0x001cff [ 0.295068] pci 0000:00:11.0: PREFETCH window: 0x38000000-0x3bffffff [ 0.295098] pci 0000:00:11.0: MEM window: 0x3c000000-0x3fffffff [ 0.295128] pci 0000:00:11.1: CardBus bridge, secondary bus 0000:0a [ 0.295149] pci 0000:00:11.1: IO window: 0x002000-0x0020ff [ 0.295176] pci 0000:00:11.1: IO window: 0x002400-0x0024ff [ 0.295204] pci 0000:00:11.1: PREFETCH window: 0x40000000-0x43ffffff [ 0.295234] pci 0000:00:11.1: MEM window: 0x44000000-0x47ffffff [ 0.295300] pci 0000:00:01.0: setting latency timer to 64 [ 0.295334] pci 0000:00:10.0: enabling device (0000 -> 0003) [ 0.297239] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.297270] PCI: setting IRQ 11 as level-triggered [ 0.297283] pci 0000:00:10.0: PCI INT A -> Link[LNKC] -> GSI 11 (level,= =20 low) -> IRQ 11 [ 0.297342] pci 0000:00:11.0: enabling device (0000 -> 0003) [ 0.298804] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.298830] pci 0000:00:11.0: PCI INT A -> Link[LNKA] -> GSI 11 (level,= =20 low) -> IRQ 11 [ 0.298887] pci 0000:00:11.1: enabling device (0000 -> 0003) [ 0.300381] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.300407] pci 0000:00:11.1: PCI INT B -> Link[LNKB] -> GSI 11 (level,= =20 low) -> IRQ 11 [ 0.300454] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.300463] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.300473] pci_bus 0000:01: resource 0 mem: [0x0-0x0] [ 0.300482] pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xfdffffff] [ 0.300491] pci_bus 0000:01: resource 2 mem: [0x48000000-0x480fffff] [ 0.300500] pci_bus 0000:01: resource 3 mem: [0x0-0x0] [ 0.300511] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff] [ 0.300519] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff] [ 0.300528] pci_bus 0000:02: resource 2 mem: [0x30000000-0x33ffffff] [ 0.300538] pci_bus 0000:02: resource 3 mem: [0x34000000-0x37ffffff] [ 0.300549] pci_bus 0000:06: resource 0 io: [0x1800-0x18ff] [ 0.300558] pci_bus 0000:06: resource 1 io: [0x1c00-0x1cff] [ 0.300567] pci_bus 0000:06: resource 2 mem: [0x38000000-0x3bffffff] [ 0.300576] pci_bus 0000:06: resource 3 mem: [0x3c000000-0x3fffffff] [ 0.300587] pci_bus 0000:0a: resource 0 io: [0x2000-0x20ff] [ 0.300596] pci_bus 0000:0a: resource 1 io: [0x2400-0x24ff] [ 0.300605] pci_bus 0000:0a: resource 2 mem: [0x40000000-0x43ffffff] [ 0.300614] pci_bus 0000:0a: resource 3 mem: [0x44000000-0x47ffffff] [ 0.300756] NET: Registered protocol family 2 [ 0.301970] IP route cache hash table entries: 4096 (order: 2, 16384=20 bytes) [ 0.303014] TCP established hash table entries: 16384 (order: 5, 131072= =20 bytes) [ 0.303884] TCP bind hash table entries: 16384 (order: 7, 655360 bytes) [ 0.310494] TCP: Hash tables configured (established 16384 bind 16384) [ 0.310774] TCP reno registered [ 0.311551] NET: Registered protocol family 1 [ 0.313040] checking if image is initramfs... it is [ 0.796938] Switched to high resolution mode on CPU 0 [ 1.225537] Freeing initrd memory: 3586k freed [ 1.234331] Initializing RT-Tester: OK [ 1.235665] audit: initializing netlink socket (disabled) [ 1.235913] type=3D2000 audit(1233033829.233:1): initialized [ 1.244706] Kprobe smoke test started [ 1.256339] Kprobe smoke test passed successfully [ 1.256455] Testing tracer sched_switch: PASSED [ 1.397402] msgmni has been set to 964 [ 1.398991] io scheduler noop registered [ 1.399027] io scheduler anticipatory registered [ 1.399046] io scheduler deadline registered [ 1.399175] io scheduler cfq registered (default) [ 1.399463] pci 0000:00:07.0: Activating ISA DMA hang workarounds [ 1.399544] pci 0000:00:0a.0: Firmware left e100 interrupts enabled;=20 disabling [ 1.399644] pci 0000:01:00.0: Boot video device [ 1.402760] vesafb: framebuffer at 0xfc000000, mapped to 0xdf780000,=20 using 3072k, total 16384k [ 1.402811] vesafb: mode is 1024x768x16, linelength=3D2048, pages=3D9 [ 1.402833] vesafb: protected mode interface info at c000:775e [ 1.402854] vesafb: pmi: set display start =3D c00c777f, set palette =3D= =20 c00c77e2 [ 1.402876] vesafb: scrolling: redraw [ 1.402896] vesafb: Truecolor: size=3D0:5:6:5, shift=3D0:11:5:0 [ 1.470527] Console: switching to colour frame buffer device 128x48 [ 1.536053] fb0: VESA VGA frame buffer device [ 1.989186] brd: module loaded [ 1.989638] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI [ 1.990749] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.993859] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.994598] e100 0000:00:0a.0: PCI INT A -> Link[LNKD] -> GSI 11 (level,= =20 low) -> IRQ 11 [ 2.022604] e100 0000:00:0a.0: PME# disabled [ 2.024489] e100: eth0: e100_probe: addr 0xf7efd000, irq 11, MAC addr=20 00:00:39:d7:14:a1 [ 2.025918] netconsole: local port 6665 [ 2.026404] netconsole: local IP 10.0.0.1 [ 2.026983] netconsole: interface eth0 [ 2.027451] netconsole: remote port 6666 [ 2.027938] netconsole: remote IP 10.0.0.2 [ 2.028447] netconsole: remote ethernet address 00:17:42:21:27:e4 [ 2.029235] netconsole: device eth0 not up yet, forcing it [ 2.045232] e100: eth0: e100_request_firmware: Failed to load firmware=20 "e100/d101m_ucode.bin": -22 [ 2.047191] netconsole: failed to open eth0 [ 2.047723] netconsole: cleaning up [ 2.049470] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64= =20 irq 1,12 [ 2.056103] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.056902] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.060664] mice: PS/2 mouse device common for all mice [ 2.062107] cpuidle: using governor ladder [ 2.086864] cpuidle: using governor menu [ 2.111329] TCP cubic registered [ 2.135419] Using IPI Shortcut mode [ 2.162752] registered taskstats version 1 [ 2.187758] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 2.214215] Freeing unused kernel memory: 232k freed [ 2.239579] Write protecting the kernel text: 2104k [ 2.264192] Write protecting the kernel read-only data: 624k [ 2.310598] input: AT Translated Set 2 keyboard as=20 /devices/platform/i8042/serio0/input/input0 [ 2.948066] SCSI subsystem initialized [ 3.019183] Driver 'sd' needs updating - please use bus_type methods [ 3.151165] libata version 3.00 loaded. [ 3.193858] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [ 3.218466] scsi0 : pata_ali [ 3.242920] scsi1 : pata_ali [ 3.270335] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xeff0 irq= =20 14 [ 3.293472] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xeff8 irq= =20 15 [ 3.474174] ata1.00: ATA-5: IC25N020ATDA04-0, DA3OA70A, max UDMA/100 [ 3.496903] ata1.00: 39070080 sectors, multi 0: LBA=20 [ 3.519237] ata1.00: limited to UDMA/33 due to 40-wire cable [ 3.554007] ata1.00: configured for UDMA/33 [ 3.577923] scsi 0:0:0:0: Direct-Access ATA IC25N020ATDA04-0=20 DA3O PQ: 0 ANSI: 5 [ 3.602301] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0= =20 GB/18.6 GiB) [ 3.625312] sd 0:0:0:0: [sda] Write Protect is off [ 3.648050] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.648233] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 3.673855] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0= =20 GB/18.6 GiB) [ 3.698086] sd 0:0:0:0: [sda] Write Protect is off [ 3.721993] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.722171] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 3.746873] sda: sda1 sda2 [ 3.803338] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.027278] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-C2502, 1313, max UDMA/33 [ 4.051749] ata2.00: WARNING: ATAPI DMA disabled for reliablity issues. = =20 It can be enabled [ 4.076231] ata2.00: WARNING: via pata_ali.atapi_dma modparam or=20 corresponding sysfs node. [ 4.113805] ata2.00: configured for UDMA/33 [ 4.142905] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-C2502=20 1313 PQ: 0 ANSI: 5 [ 4.432426] ReiserFS: sda2: found reiserfs format "3.6" with standard=20 journal [ 4.459136] ReiserFS: sda2: using ordered data mode [ 4.499571] ReiserFS: sda2: journal params: device sda2, size 8192,=20 journal first block 18, max trans len 1024, max batch 900, max commit age=20 30, max trans age 30 [ 4.562985] ReiserFS: sda2: checking transaction log (sda2) [ 7.527891] ReiserFS: sda2: replayed 9 transactions in 3 seconds [ 7.940596] ReiserFS: sda2: Using r5 hash to sort names [ 10.425258] usbcore: registered new interface driver usbfs [ 10.452859] usbcore: registered new interface driver hub [ 10.479901] usbcore: registered new device driver usb [ 16.423816] Linux agpgart interface v0.103 [ 16.532621] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 16.537079] ACPI: AC Adapter [ADP1] (on-line) [ 16.543204] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 [ 16.543233] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11=20 (level, low) -> IRQ 11 [ 16.543553] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 16.545988] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus= =20 number 1 [ 16.546113] ohci_hcd 0000:00:02.0: irq 11, io mem 0xf7eff000 [ 16.611443] usb usb1: configuration #1 chosen from 1 choice [ 16.612643] hub 1-0:1.0: USB hub found [ 16.612907] hub 1-0:1.0: 3 ports detected [ 16.642710] input: Power Button (FF) as=20 /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 16.656970] ACPI: Power Button (FF) [PWRF] [ 16.657791] input: Lid Switch as=20 /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 16.658561] ACPI: Lid Switch [LID] [ 16.788645] agpgart-ali 0000:00:00.0: ALi M1644 chipset [ 16.803507] ACPI Warning (nspredef-0940): \_SB_.BAT1._BIF: Return Packag= e=20 type mismatch at index 12 - found Integer, expected String/Buffer [20081204] [ 16.805021] ACPI: Battery Slot [BAT1] (battery present) [ 16.805246] ACPI: Battery Slot [BAT2] (battery absent) [ 16.814244] agpgart-ali 0000:00:00.0: AGP aperture is 64M @ 0xf0000000 [ 16.818024] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 16.818893] processor ACPI_CPU:00: registered as cooling_device0 [ 17.005413] thermal LNXTHERM:01: registered as thermal_zone0 [ 17.019715] ACPI: Thermal Zone [THRM] (60 C) [ 17.060281] input: Video Bus as=20 /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:14/device:15/input/input3 [ 17.070242] ACPI: Video Device [VGA] (multi-head: yes rom: yes post:=20 no) [ 17.135012] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 17.135340] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 17.200916] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19 [ 17.200932] toshiba_acpi: HCI method: \_SB_.VALD.GHCI [ 17.287612] pci 0000:00:08.0: enabling device (0000 -> 0001) [ 17.288765] ALi_M1535: initialized. timeout=3D60 sec (nowayout=3D0) [ 17.370347] fan PNP0C0B:00: registered as cooling_device1 [ 17.370387] ACPI: Fan [FAN] (off) [ 17.757062] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 18.120823] Driver 'sr' needs updating - please use bus_type methods [ 18.159398] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 18.159422] Uniform CD-ROM driver Revision: 3.20 [ 18.160790] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 18.494394] input: ImPS/2 Generic Wheel Mouse as=20 /devices/platform/i8042/serio1/input/input5 [ 18.593472] yenta_cardbus 0000:00:10.0: CardBus bridge found [12a3:ab01] [ 18.720976] yenta_cardbus 0000:00:10.0: ISA IRQ mask 0x0000, PCI irq 11 [ 18.720994] yenta_cardbus 0000:00:10.0: Socket status: 30000011 [ 18.728048] yenta_cardbus 0000:00:11.0: CardBus bridge found [1179:0001] [ 18.854406] yenta_cardbus 0000:00:11.0: ISA IRQ mask 0x04b8, PCI irq 11 [ 18.854424] yenta_cardbus 0000:00:11.0: Socket status: 30000087 [ 18.882722] yenta_cardbus 0000:00:11.1: CardBus bridge found [1179:0001] [ 18.967841] rtc_cmos 00:07: RTC can wake from S4 [ 18.969586] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 18.969689] rtc0: alarms up to one year, 114 bytes nvram [ 19.007604] yenta_cardbus 0000:00:11.1: ISA IRQ mask 0x04b8, PCI irq 11 [ 19.007620] yenta_cardbus 0000:00:11.1: Socket status: 30000007 [ 19.360232] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted=20 into slot 0 [ 20.391374] NET: Registered protocol family 23 [ 20.611982] Detected unconfigured Toshiba laptop with ALi ISA bridge SMS= C=20 IrDA chip, pre-configuring device. [ 20.612023] Activated ALi 1533 ISA bridge port 0x02e8. [ 20.612039] Activated ALi 1533 ISA bridge port 0x02f8. [ 20.612293] found SMC SuperIO Chip (devid=3D0x5a rev=3D00 base=3D0x002e)= :=20 LPC47N227 [ 20.612308] smsc_superio_flat(): IrDA not enabled [ 20.612336] smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7= ,=20 mode: 0x02 [ 20.612375] SMsC IrDA Controller found [ 20.612378] IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3D3, irq= =3D7 [ 20.612604] No transceiver found. Defaulting to Fast pin select [ 20.612646] irda0 (): not using net_device_ops yet [ 20.613795] IrDA: Registered device irda0 [ 22.425819] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [ 22.427551] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 22.427570] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11=20 (level, low) -> IRQ 11 [ 26.013014] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af:= =20 excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f [ 26.016539] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff:= =20 clean. [ 26.018111] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff:= =20 clean. [ 26.019497] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7:= =20 clean. [ 26.022164] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xa00-0xaff:= =20 clean. [ 26.181618] Marking TSC unstable due to TSC halts in idle [ 26.293407] Clocksource tsc unstable (delta =3D -353272291 ns) [ 26.627092] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:= =20 excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f [ 26.630428] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:= =20 clean. [ 26.631944] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:= =20 clean. [ 26.633656] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:= =20 clean. [ 26.636193] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:= =20 clean. [ 26.638326] pcmcia_socket pcmcia_socket0: cs: memory probe=20 0xa0000000-0xa0ffffff: clean. [ 26.652582] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 [ 26.661524] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:= =20 excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f [ 26.681139] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:= =20 clean. [ 26.682650] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:= =20 clean. [ 26.684258] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:= =20 clean. [ 26.686839] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:= =20 clean. [ 26.906667] orinoco 0.15 (David Gibson ,=20 Pavel Roskin , et al) [ 27.102349] orinoco_cs 0.15 (David Gibson = ,=20 Pavel Roskin , et al) [ 27.184457] eth1: Hardware identity 0005:0002:0001:0002 [ 27.184576] eth1: Station identity 001f:0001:0006:000e [ 27.184588] eth1: Firmware determined as Lucent/Agere 6.14 [ 27.184602] eth1: Attempting to download firmware agere_sta_fw.bin [ 27.184631] hermes_dld: AUX enable returned 0 [ 27.185636] hermes_dld: AUX disable returned 0 [ 27.185645] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 27.185652] eth1: Read PDA returned 0 [ 27.185665] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin [ 27.353708] hermes_dld: AUX enable returned 0 [ 27.353724] hermes_dld: Enabling volatile, EP 0x000f8000 [ 27.354815] hermes_dld: PROGRAM_ENABLE returned 0 [ 27.354823] eth1: Program init returned 0 [ 27.354833] hermes_dld: Programming block of length 60416 to address=20 0x001f0000 [ 27.402930] hermes_dld: Programming block of length 4096 to address=20 0x001ef000 [ 27.406209] eth1: Program returned 0 [ 27.406219] hermes_dld: Found record 0x0003 at dde3a81c [ 27.406240] hermes_dld: Found record 0x0005 at dde3a8a8 [ 27.406259] hermes_dld: Found record 0x0008 at dde3a8d2 [ 27.406276] hermes_dld: Found record 0x0007 at dde3a8c4 [ 27.406294] hermes_dld: Found record 0x0006 at dde3a8b6 [ 27.406314] hermes_dld: Found record 0x0110 at dde3a99a [ 27.406347] hermes_dld: Found record 0x0120 at dde3a9ba [ 27.406380] hermes_dld: Found record 0x0130 at dde3a9da [ 27.406412] hermes_dld: Found record 0x0140 at dde3a9fa [ 27.406426] hermes_dld: Found record 0x0150 at dde3aa02 [ 27.406439] hermes_dld: Using default record 0x0160 at dfaaeb60 [ 27.406472] hermes_dld: Found record 0x0101 at dde3a946 [ 27.406488] hermes_dld: Found record 0x0103 at dde3a95c [ 27.406508] hermes_dld: Found record 0x0104 at dde3a96c [ 27.406520] hermes_dld: Found record 0x0105 at dde3a972 [ 27.406532] hermes_dld: Found record 0x0105 at dde3a972 [ 27.406544] hermes_dld: Found record 0x0105 at dde3a972 [ 27.406556] hermes_dld: Found record 0x0107 at dde3a97e [ 27.406568] hermes_dld: Found record 0x0109 at dde3a98c [ 27.406587] hermes_dld: Using default record 0x0161 at dfaaeb80 [ 27.406851] eth1: Apply PDA returned 0 [ 27.406916] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000= ,=20 r2 0x0000 [ 27.406945] hermes_dld: AUX disable returned 0 [ 27.417580] eth1: Program end returned 0 [ 27.417589] eth1: hermes_present returned 1 [ 27.418413] eth1: Hardware identity 0005:0002:0001:0002 [ 27.418540] eth1: Station identity 001f:0002:0009:0030 [ 27.418552] eth1: Firmware determined as Lucent/Agere 9.48 [ 27.418560] eth1: Ad-hoc demo mode supported [ 27.418567] eth1: IEEE standard IBSS ad-hoc mode supported [ 27.418574] eth1: WEP supported, 104-bit key [ 27.418582] eth1: WPA-PSK supported [ 27.763503] eth1: MAC address 00:02:2d:26:95:6c [ 27.763619] eth1: Station name "HERMES I" [ 27.764340] eth1: ready [ 27.765187] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f [ 28.224255] Toshiba System Management Mode driver v1.11 26/9/2001 [ 28.515772] Non-volatile memory driver v1.3 [ 29.719444] device-mapper: uevent: version 1.0.3 [ 29.721544] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:= =20 dm-devel@redhat.com [ 29.879406] device-mapper: multipath: version 1.0.5 loaded [ 30.306641] device-mapper: multipath round-robin: version 1.0.0 loaded [ 30.308093] device-mapper: table: 254:0: multipath: error getting device [ 30.308112] device-mapper: ioctl: error adding target to table [ 35.035611] loop: module loaded [ 37.628002] Adding 500432k swap on /dev/sda1. Priority:-1 extents:1=20 across:500432k=20 [ 42.476006] IrCOMM protocol (Dag Brattli) [ 45.000236] PPP generic driver version 2.4.2 [ 54.746498] NET: Registered protocol family 17 [ 55.513822] eth1: Lucent/Agere firmware doesn't support manual roaming [ 55.696197] eth1: New link status: Connected (0001) [ 1655.597137] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot= =20 0 [ 1667.668995] orinoco 0.15 (David Gibson ,=20 Pavel Roskin , et al) [ 1672.023101] orinoco_cs 0.15 (David Gibson = ,=20 Pavel Roskin , et al) [ 1676.156634] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted=20 into slot 0 [ 1676.157098] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 [ 1676.165387] orinoco_cs_config: mem =3D 00010100 [ 1676.165411] orinoco_cs_config: iobase =3D 00010100, spacing =3D 0 [ 1676.248321] eth1: Hardware identity 0005:0002:0001:0002 [ 1676.248442] eth1: Station identity 001f:0001:0006:000e [ 1676.248453] eth1: Firmware determined as Lucent/Agere 6.14 [ 1676.253946] eth1: Attempting to download firmware agere_sta_fw.bin [ 1676.253991] hermes_dld: AUX enable returned 0 [ 1676.254997] hermes_dld: AUX disable returned 0 [ 1676.255005] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 1676.255012] eth1: Read PDA returned 0 [ 1676.255025] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin [ 1676.406694] hermes_dld: AUX enable returned 0 [ 1676.406711] hermes_dld: Enabling volatile, EP 0x000f8000 [ 1676.407791] hermes_dld: PROGRAM_ENABLE returned 0 [ 1676.407799] eth1: Program init returned 0 [ 1676.407809] hermes_dld: Programming block of length 60416 to address=20 0x001f0000 [ 1676.455929] hermes_dld: Programming block of length 4096 to address=20 0x001ef000 [ 1676.459209] eth1: Program returned 0 [ 1676.459219] hermes_dld: Found record 0x0003 at cb4d8c1c [ 1676.459241] hermes_dld: Found record 0x0005 at cb4d8ca8 [ 1676.459260] hermes_dld: Found record 0x0008 at cb4d8cd2 [ 1676.459277] hermes_dld: Found record 0x0007 at cb4d8cc4 [ 1676.459295] hermes_dld: Found record 0x0006 at cb4d8cb6 [ 1676.459315] hermes_dld: Found record 0x0110 at cb4d8d9a [ 1676.459349] hermes_dld: Found record 0x0120 at cb4d8dba [ 1676.459382] hermes_dld: Found record 0x0130 at cb4d8dda [ 1676.459414] hermes_dld: Found record 0x0140 at cb4d8dfa [ 1676.459428] hermes_dld: Found record 0x0150 at cb4d8e02 [ 1676.459441] hermes_dld: Using default record 0x0160 at dfaaeb60 [ 1676.459474] hermes_dld: Found record 0x0101 at cb4d8d46 [ 1676.459489] hermes_dld: Found record 0x0103 at cb4d8d5c [ 1676.459509] hermes_dld: Found record 0x0104 at cb4d8d6c [ 1676.459521] hermes_dld: Found record 0x0105 at cb4d8d72 [ 1676.459534] hermes_dld: Found record 0x0105 at cb4d8d72 [ 1676.459546] hermes_dld: Found record 0x0105 at cb4d8d72 [ 1676.459558] hermes_dld: Found record 0x0107 at cb4d8d7e [ 1676.459571] hermes_dld: Found record 0x0109 at cb4d8d8c [ 1676.459589] hermes_dld: Using default record 0x0161 at dfaaeb80 [ 1676.459805] eth1: Apply PDA returned 0 [ 1676.459902] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000= ,=20 r2 0x0000 [ 1676.459932] hermes_dld: AUX disable returned 0 [ 1676.470577] eth1: Program end returned 0 [ 1676.470586] eth1: hermes_present returned 1 [ 1676.471402] eth1: Hardware identity 0005:0002:0001:0002 [ 1676.471530] eth1: Station identity 001f:0002:0009:0030 [ 1676.471541] eth1: Firmware determined as Lucent/Agere 9.48 [ 1676.471549] eth1: Ad-hoc demo mode supported [ 1676.471556] eth1: IEEE standard IBSS ad-hoc mode supported [ 1676.471563] eth1: WEP supported, 104-bit key [ 1676.471571] eth1: WPA-PSK supported [ 1676.513945] eth1: MAC address 00:02:2d:26:95:6c [ 1676.514064] eth1: Station name "HERMES I" [ 1676.515375] eth1: ready [ 1676.520650] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f [ 1787.688813] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot= =20 0 [ 1794.179963] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted=20 into slot 0 [ 1794.180421] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 [ 1794.401279] orinoco 0.15 (David Gibson ,=20 Pavel Roskin , et al) [ 1794.614507] orinoco_cs 0.15 (David Gibson = ,=20 Pavel Roskin , et al) [ 1794.699011] eth1: Hardware identity 0005:0002:0001:0002 [ 1794.699131] eth1: Station identity 001f:0001:0006:000e [ 1794.699143] eth1: Firmware determined as Lucent/Agere 6.14 [ 1794.709414] eth1: Attempting to download firmware agere_sta_fw.bin [ 1794.709463] hermes_dld: AUX enable returned 0 [ 1794.710593] hermes_dld: AUX disable returned 0 [ 1794.710602] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 1794.710610] eth1: Read PDA returned 0 [ 1794.714455] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin [ 1794.850396] hermes_dld: AUX enable returned 0 [ 1794.850413] hermes_dld: Enabling volatile, EP 0x000f8000 [ 1794.851504] hermes_dld: PROGRAM_ENABLE returned 0 [ 1794.851512] eth1: Program init returned 0 [ 1794.851521] hermes_dld: Programming block of length 60416 to address=20 0x001f0000 [ 1794.899782] hermes_dld: Programming block of length 4096 to address=20 0x001ef000 [ 1794.903062] eth1: Program returned 0 [ 1794.903073] hermes_dld: Found record 0x0003 at de9bfc1c [ 1794.903095] hermes_dld: Found record 0x0005 at de9bfca8 [ 1794.903114] hermes_dld: Found record 0x0008 at de9bfcd2 [ 1794.903131] hermes_dld: Found record 0x0007 at de9bfcc4 [ 1794.903149] hermes_dld: Found record 0x0006 at de9bfcb6 [ 1794.903216] hermes_dld: Found record 0x0110 at de9bfd9a [ 1794.903250] hermes_dld: Found record 0x0120 at de9bfdba [ 1794.903283] hermes_dld: Found record 0x0130 at de9bfdda [ 1794.903316] hermes_dld: Found record 0x0140 at de9bfdfa [ 1794.903329] hermes_dld: Found record 0x0150 at de9bfe02 [ 1794.903343] hermes_dld: Using default record 0x0160 at dfaaeb60 [ 1794.903376] hermes_dld: Found record 0x0101 at de9bfd46 [ 1794.903391] hermes_dld: Found record 0x0103 at de9bfd5c [ 1794.903411] hermes_dld: Found record 0x0104 at de9bfd6c [ 1794.903423] hermes_dld: Found record 0x0105 at de9bfd72 [ 1794.903435] hermes_dld: Found record 0x0105 at de9bfd72 [ 1794.903448] hermes_dld: Found record 0x0105 at de9bfd72 [ 1794.903460] hermes_dld: Found record 0x0107 at de9bfd7e [ 1794.903472] hermes_dld: Found record 0x0109 at de9bfd8c [ 1794.903490] hermes_dld: Using default record 0x0161 at dfaaeb80 [ 1794.903706] eth1: Apply PDA returned 0 [ 1794.903771] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000= ,=20 r2 0x0000 [ 1794.903800] hermes_dld: AUX disable returned 0 [ 1794.914439] eth1: Program end returned 0 [ 1794.914448] eth1: hermes_present returned 1 [ 1794.915265] eth1: Hardware identity 0005:0002:0001:0002 [ 1794.915392] eth1: Station identity 001f:0002:0009:0030 [ 1794.915403] eth1: Firmware determined as Lucent/Agere 9.48 [ 1794.915412] eth1: Ad-hoc demo mode supported [ 1794.915419] eth1: IEEE standard IBSS ad-hoc mode supported [ 1794.915426] eth1: WEP supported, 104-bit key [ 1794.915434] eth1: WPA-PSK supported [ 1794.978414] eth1: MAC address 00:02:2d:26:95:6c [ 1794.978531] eth1: Station name "HERMES I" [ 1794.979367] eth1: ready [ 1794.984388] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f [ 1796.155223] eth1: Lucent/Agere firmware doesn't support manual roaming [ 1796.449939] eth1: New link status: Connected (0001) [ 1815.463060] PM: Syncing filesystems ... done. [ 1815.517782] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin [ 1815.557683] Freezing user space processes ... (elapsed 0.02 seconds)=20 done. [ 1815.582733] Freezing remaining freezable tasks ... (elapsed 0.00 seconds= )=20 done. [ 1815.583550] Suspending console(s) (use no_console_suspend to debug) [ 1815.595005] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1816.048237] sd 0:0:0:0: [sda] Stopping disk [ 1816.749538] pci 0000:01:00.0: power state changed by ACPI to D3 [ 1816.764397] e100 0000:00:0a.0: PME# enabled [ 1816.764649] e100 0000:00:0a.0: wake-up capability enabled by ACPI [ 1816.764818] e100 0000:00:0a.0: PCI INT A disabled [ 1816.833679] ALI 5451 0000:00:06.0: PCI INT A disabled [ 1816.846939] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [ 1817.633557] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [ 1817.646806] ohci_hcd 0000:00:02.0: PCI INT A disabled [ 1817.646913] ohci_hcd 0000:00:02.0: PME# disabled [ 1817.676801] ACPI: Preparing to enter system sleep state S3 [ 1817.676801] Back to C! [ 1817.676801] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf= =20 (was 0x500001ff, writing 0x5000010b) [ 1817.676801] pci 0000:00:12.0: restoring config space at offset 0xf (was= =20 0x1ff, writing 0x10b) [ 1817.676801] pci 0000:01:00.0: restoring config space at offset 0xf (was= =20 0x1ff, writing 0x10b) [ 1817.692557] ACPI: Waking up from system sleep state S3 [ 1817.718909] agpgart-ali 0000:00:00.0: PME# disabled [ 1817.718963] pci 0000:00:01.0: setting latency timer to 64 [ 1817.718997] ohci_hcd 0000:00:02.0: PME# disabled [ 1817.729980] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11=20 (level, low) -> IRQ 11 [ 1817.730011] ohci_hcd 0000:00:02.0: PME# disabled [ 1817.785281] usb usb1: root hub lost power or was reset [ 1817.796890] pata_ali 0000:00:04.0: restoring config space at offset 0x1= =20 (was 0x2900001, writing 0x2900005) [ 1817.796944] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [ 1817.806834] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [ 1817.806872] ALI 5451 0000:00:06.0: restoring config space at offset 0xf= =20 (was 0x180201ff, writing 0x1802010b) [ 1817.807118] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [ 1817.807359] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11=20 (level, low) -> IRQ 11 [ 1818.093261] pci 0000:00:07.0: PME# disabled [ 1818.093287] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [ 1818.106618] e100 0000:00:0a.0: restoring config space at offset 0xf (was= =20 0x380801ff, writing 0x3808010b) [ 1818.106682] e100 0000:00:0a.0: restoring config space at offset 0x1 (was= =20 0x2900003, writing 0x2900007) [ 1818.106721] e100 0000:00:0a.0: wake-up capability disabled by ACPI [ 1818.106735] e100 0000:00:0a.0: PME# disabled [ 1818.106811] yenta_cardbus 0000:00:10.0: restoring config space at offset= =20 0x6 (was 0x50200, writing 0xb0050200) [ 1818.380552] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [ 1818.380562] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [ 1818.381301] ata2.00: configured for UDMA/33 [ 1819.089989] pci 0000:00:12.0: PME# disabled [ 1819.090024] pci 0000:01:00.0: PME# disabled [ 1819.095464] sd 0:0:0:0: [sda] Starting disk [ 1820.043600] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [ 1820.043611] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [ 1820.057223] ata1.00: configured for UDMA/33 [ 1820.081412] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0= =20 GB/18.6 GiB) [ 1820.081695] sd 0:0:0:0: [sda] Write Protect is off [ 1820.081704] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1820.081894] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [ 1820.334337] eth1: Attempting to download firmware agere_sta_fw.bin [ 1820.334371] hermes_dld: AUX enable returned 0 [ 1820.335394] hermes_dld: AUX disable returned 0 [ 1820.335401] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 1820.335407] eth1: Read PDA returned 0 [ 1820.417580] hermes_dld: AUX enable returned 0 [ 1820.417587] hermes_dld: Enabling volatile, EP 0x000f8000 [ 1820.418687] hermes_dld: PROGRAM_ENABLE returned 0 [ 1820.418693] eth1: Program init returned 0 [ 1820.418701] hermes_dld: Programming block of length 60416 to address=20 0x001f0000 [ 1820.466864] hermes_dld: Programming block of length 4096 to address=20 0x001ef000 [ 1820.470139] eth1: Program returned 0 [ 1820.470147] hermes_dld: Found record 0x0003 at cb4d901c [ 1820.470167] hermes_dld: Found record 0x0005 at cb4d90a8 [ 1820.470184] hermes_dld: Found record 0x0008 at cb4d90d2 [ 1820.470200] hermes_dld: Found record 0x0007 at cb4d90c4 [ 1820.470216] hermes_dld: Found record 0x0006 at cb4d90b6 [ 1820.470234] hermes_dld: Found record 0x0110 at cb4d919a [ 1820.470265] hermes_dld: Found record 0x0120 at cb4d91ba [ 1820.470296] hermes_dld: Found record 0x0130 at cb4d91da [ 1820.470327] hermes_dld: Found record 0x0140 at cb4d91fa [ 1820.470339] hermes_dld: Found record 0x0150 at cb4d9202 [ 1820.470351] hermes_dld: Using default record 0x0160 at dfaaeb60 [ 1820.470382] hermes_dld: Found record 0x0101 at cb4d9146 [ 1820.470396] hermes_dld: Found record 0x0103 at cb4d915c [ 1820.470415] hermes_dld: Found record 0x0104 at cb4d916c [ 1820.470425] hermes_dld: Found record 0x0105 at cb4d9172 [ 1820.470436] hermes_dld: Found record 0x0105 at cb4d9172 [ 1820.470447] hermes_dld: Found record 0x0105 at cb4d9172 [ 1820.470458] hermes_dld: Found record 0x0107 at cb4d917e [ 1820.470469] hermes_dld: Found record 0x0109 at cb4d918c [ 1820.470486] hermes_dld: Using default record 0x0161 at dfaaeb80 [ 1820.470700] eth1: Apply PDA returned 0 [ 1820.470763] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000= ,=20 r2 0x0000 [ 1820.470790] hermes_dld: AUX disable returned 0 [ 1820.481427] eth1: Program end returned 0 [ 1820.481435] eth1: hermes_present returned 1 [ 1820.493041] Restarting tasks ... done. [ 1820.709053] eth1: New link status: Connected (0001) [ 5502.449614] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot= =20 0 [ 5511.899442] orinoco 0.15 (David Gibson ,=20 Pavel Roskin , et al) [ 5518.002795] orinoco_cs 0.15 (David Gibson = ,=20 Pavel Roskin , et al) [ 5526.646261] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted=20 into slot 0 [ 5526.646720] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 [ 5526.654184] orinoco_cs_config: mem =3D 00010100 [ 5526.654208] orinoco_cs_config: iobase =3D 00010100, spacing =3D 0 [ 5526.736410] eth1: Hardware identity 0005:0002:0001:0002 [ 5526.736527] eth1: Station identity 001f:0001:0006:000e [ 5526.736538] eth1: Firmware determined as Lucent/Agere 6.14 [ 5526.736553] eth1: Attempting to download firmware agere_sta_fw.bin [ 5526.736583] hermes_dld: AUX enable returned 0 [ 5526.737587] hermes_dld: AUX disable returned 0 [ 5526.737595] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 5526.737602] eth1: Read PDA returned 0 [ 5526.737615] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin [ 5526.925490] hermes_dld: AUX enable returned 0 [ 5526.925504] hermes_dld: Enabling volatile, EP 0x000f8000 [ 5526.926606] hermes_dld: PROGRAM_ENABLE returned 0 [ 5526.926616] eth1: Program init returned 0 [ 5526.926626] hermes_dld: Programming block of length 60416 to address=20 0x001f0000 [ 5526.974783] hermes_dld: Programming block of length 4096 to address=20 0x001ef000 [ 5526.978054] eth1: Program returned 0 [ 5526.978065] hermes_dld: Found record 0x0003 at cb5da41c [ 5526.978086] hermes_dld: Found record 0x0005 at cb5da4a8 [ 5526.978105] hermes_dld: Found record 0x0008 at cb5da4d2 [ 5526.978122] hermes_dld: Found record 0x0007 at cb5da4c4 [ 5526.978140] hermes_dld: Found record 0x0006 at cb5da4b6 [ 5526.978160] hermes_dld: Found record 0x0110 at cb5da59a [ 5526.978193] hermes_dld: Found record 0x0120 at cb5da5ba [ 5526.978226] hermes_dld: Found record 0x0130 at cb5da5da [ 5526.978259] hermes_dld: Found record 0x0140 at cb5da5fa [ 5526.978273] hermes_dld: Found record 0x0150 at cb5da602 [ 5526.978285] hermes_dld: Using default record 0x0160 at dfaaeb60 [ 5526.978319] hermes_dld: Found record 0x0101 at cb5da546 [ 5526.978334] hermes_dld: Found record 0x0103 at cb5da55c [ 5526.978354] hermes_dld: Found record 0x0104 at cb5da56c [ 5526.978366] hermes_dld: Found record 0x0105 at cb5da572 [ 5526.978378] hermes_dld: Found record 0x0105 at cb5da572 [ 5526.978390] hermes_dld: Found record 0x0105 at cb5da572 [ 5526.978402] hermes_dld: Found record 0x0107 at cb5da57e [ 5526.978415] hermes_dld: Found record 0x0109 at cb5da58c [ 5526.978433] hermes_dld: Using default record 0x0161 at dfaaeb80 [ 5526.978649] eth1: Apply PDA returned 0 [ 5526.978714] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000= ,=20 r2 0x0000 [ 5526.978743] hermes_dld: AUX disable returned 0 [ 5526.989388] eth1: Program end returned 0 [ 5526.989397] eth1: hermes_present returned 1 [ 5526.990206] eth1: Hardware identity 0005:0002:0001:0002 [ 5526.990334] eth1: Station identity 001f:0002:0009:0030 [ 5526.990345] eth1: Firmware determined as Lucent/Agere 9.48 [ 5526.990354] eth1: Ad-hoc demo mode supported [ 5526.990361] eth1: IEEE standard IBSS ad-hoc mode supported [ 5526.990368] eth1: WEP supported, 104-bit key [ 5526.990376] eth1: WPA-PSK supported [ 5527.040888] eth1: MAC address 00:02:2d:26:95:6c [ 5527.041004] eth1: Station name "HERMES I" [ 5527.042275] eth1: ready [ 5527.048493] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f [ 5539.026347] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot= =20 0 [ 5548.606257] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted=20 into slot 0 [ 5548.606707] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 [ 5548.783994] orinoco 0.15 (David Gibson ,=20 Pavel Roskin , et al) [ 5548.994266] orinoco_cs 0.15 (David Gibson = ,=20 Pavel Roskin , et al) [ 5549.077400] eth1: Hardware identity 0005:0002:0001:0002 [ 5549.077519] eth1: Station identity 001f:0001:0006:000e [ 5549.077530] eth1: Firmware determined as Lucent/Agere 6.14 [ 5549.082742] eth1: Attempting to download firmware agere_sta_fw.bin [ 5549.082785] hermes_dld: AUX enable returned 0 [ 5549.083923] hermes_dld: AUX disable returned 0 [ 5549.083932] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 5549.083940] eth1: Read PDA returned 0 [ 5549.087324] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin [ 5549.209754] hermes_dld: AUX enable returned 0 [ 5549.209771] hermes_dld: Enabling volatile, EP 0x000f8000 [ 5549.210850] hermes_dld: PROGRAM_ENABLE returned 0 [ 5549.210858] eth1: Program init returned 0 [ 5549.210868] hermes_dld: Programming block of length 60416 to address=20 0x001f0000 [ 5549.258969] hermes_dld: Programming block of length 4096 to address=20 0x001ef000 [ 5549.262246] eth1: Program returned 0 [ 5549.262256] hermes_dld: Found record 0x0003 at de9bf81c [ 5549.262278] hermes_dld: Found record 0x0005 at de9bf8a8 [ 5549.262297] hermes_dld: Found record 0x0008 at de9bf8d2 [ 5549.262314] hermes_dld: Found record 0x0007 at de9bf8c4 [ 5549.262332] hermes_dld: Found record 0x0006 at de9bf8b6 [ 5549.262352] hermes_dld: Found record 0x0110 at de9bf99a [ 5549.262386] hermes_dld: Found record 0x0120 at de9bf9ba [ 5549.262419] hermes_dld: Found record 0x0130 at de9bf9da [ 5549.262452] hermes_dld: Found record 0x0140 at de9bf9fa [ 5549.262466] hermes_dld: Found record 0x0150 at de9bfa02 [ 5549.262478] hermes_dld: Using default record 0x0160 at dfaaeb60 [ 5549.262511] hermes_dld: Found record 0x0101 at de9bf946 [ 5549.262527] hermes_dld: Found record 0x0103 at de9bf95c [ 5549.262547] hermes_dld: Found record 0x0104 at de9bf96c [ 5549.262559] hermes_dld: Found record 0x0105 at de9bf972 [ 5549.262571] hermes_dld: Found record 0x0105 at de9bf972 [ 5549.262583] hermes_dld: Found record 0x0105 at de9bf972 [ 5549.262595] hermes_dld: Found record 0x0107 at de9bf97e [ 5549.262607] hermes_dld: Found record 0x0109 at de9bf98c [ 5549.262626] hermes_dld: Using default record 0x0161 at dfaaeb80 [ 5549.262889] eth1: Apply PDA returned 0 [ 5549.262955] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000= ,=20 r2 0x0000 [ 5549.262984] hermes_dld: AUX disable returned 0 [ 5549.273627] eth1: Program end returned 0 [ 5549.273636] eth1: hermes_present returned 1 [ 5549.274449] eth1: Hardware identity 0005:0002:0001:0002 [ 5549.274575] eth1: Station identity 001f:0002:0009:0030 [ 5549.274587] eth1: Firmware determined as Lucent/Agere 9.48 [ 5549.274595] eth1: Ad-hoc demo mode supported [ 5549.274602] eth1: IEEE standard IBSS ad-hoc mode supported [ 5549.274609] eth1: WEP supported, 104-bit key [ 5549.274618] eth1: WPA-PSK supported [ 5549.314286] eth1: MAC address 00:02:2d:26:95:6c [ 5549.314404] eth1: Station name "HERMES I" [ 5549.315259] eth1: ready [ 5549.320270] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f [ 5550.497592] eth1: Lucent/Agere firmware doesn't support manual roaming [ 5550.777305] eth1: New link status: Connected (0001) [ 6809.469178] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot= =20 0 [ 6845.475579] orinoco 0.15 (David Gibson ,=20 Pavel Roskin , et al) [ 6848.596759] orinoco_cs 0.15 (David Gibson = ,=20 Pavel Roskin , et al) [ 6855.326095] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted=20 into slot 0 [ 6855.326550] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 [ 6855.333756] orinoco_cs_config: mem =3D 00010100 [ 6855.333780] orinoco_cs_config: iobase =3D 00010100, spacing =3D 0 [ 6855.417190] eth1: Hardware identity 0005:0002:0001:0002 [ 6855.417308] eth1: Station identity 001f:0001:0006:000e [ 6855.417319] eth1: Firmware determined as Lucent/Agere 6.14 [ 6855.417731] eth1: Attempting to download firmware agere_sta_fw.bin [ 6855.417763] hermes_dld: AUX enable returned 0 [ 6855.418768] hermes_dld: AUX disable returned 0 [ 6855.418776] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 6855.418784] eth1: Read PDA returned 0 [ 6855.418798] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin [ 6855.644099] hermes_dld: AUX enable returned 0 [ 6855.644117] hermes_dld: Enabling volatile, EP 0x000f8000 [ 6855.645196] hermes_dld: PROGRAM_ENABLE returned 0 [ 6855.645204] eth1: Program init returned 0 [ 6855.645214] hermes_dld: Programming block of length 60416 to address=20 0x001f0000 [ 6855.693417] hermes_dld: Programming block of length 4096 to address=20 0x001ef000 [ 6855.696695] eth1: Program returned 0 [ 6855.696705] hermes_dld: Found record 0x0003 at db5d081c [ 6855.696727] hermes_dld: Found record 0x0005 at db5d08a8 [ 6855.696746] hermes_dld: Found record 0x0008 at db5d08d2 [ 6855.696763] hermes_dld: Found record 0x0007 at db5d08c4 [ 6855.696781] hermes_dld: Found record 0x0006 at db5d08b6 [ 6855.696800] hermes_dld: Found record 0x0110 at db5d099a [ 6855.696834] hermes_dld: Found record 0x0120 at db5d09ba [ 6855.696867] hermes_dld: Found record 0x0130 at db5d09da [ 6855.696899] hermes_dld: Found record 0x0140 at db5d09fa [ 6855.696913] hermes_dld: Found record 0x0150 at db5d0a02 [ 6855.696926] hermes_dld: Using default record 0x0160 at dfaaeb60 [ 6855.696959] hermes_dld: Found record 0x0101 at db5d0946 [ 6855.696974] hermes_dld: Found record 0x0103 at db5d095c [ 6855.696994] hermes_dld: Found record 0x0104 at db5d096c [ 6855.697006] hermes_dld: Found record 0x0105 at db5d0972 [ 6855.697018] hermes_dld: Found record 0x0105 at db5d0972 [ 6855.697031] hermes_dld: Found record 0x0105 at db5d0972 [ 6855.697043] hermes_dld: Found record 0x0107 at db5d097e [ 6855.697055] hermes_dld: Found record 0x0109 at db5d098c [ 6855.697073] hermes_dld: Using default record 0x0161 at dfaaeb80 [ 6855.697289] eth1: Apply PDA returned 0 [ 6855.697354] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000= ,=20 r2 0x0000 [ 6855.697382] hermes_dld: AUX disable returned 0 [ 6855.708018] eth1: Program end returned 0 [ 6855.708028] eth1: hermes_present returned 1 [ 6855.708846] eth1: Hardware identity 0005:0002:0001:0002 [ 6855.708974] eth1: Station identity 001f:0002:0009:0030 [ 6855.708985] eth1: Firmware determined as Lucent/Agere 9.48 [ 6855.708994] eth1: Ad-hoc demo mode supported [ 6855.709001] eth1: IEEE standard IBSS ad-hoc mode supported [ 6855.709008] eth1: WEP supported, 104-bit key [ 6855.709016] eth1: WPA-PSK supported [ 6855.761332] eth1: MAC address 00:02:2d:26:95:6c [ 6855.761448] eth1: Station name "HERMES I" [ 6855.763034] eth1: ready [ 6855.767920] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f [ 6857.736999] orinoco_irq_tasklet called [ 6874.174334] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot= =20 0 [ 6974.787788] orinoco 0.15 (David Gibson ,=20 Pavel Roskin , et al) [ 6977.244642] orinoco_cs 0.15 (David Gibson = ,=20 Pavel Roskin , et al) [ 6980.846116] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted=20 into slot 0 [ 6980.846578] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 [ 6980.858892] orinoco_cs_config: mem =3D 00010100 [ 6980.858917] orinoco_cs_config: iobase =3D 00010100, spacing =3D 0 [ 6980.941885] eth1: Hardware identity 0005:0002:0001:0002 [ 6980.942005] eth1: Station identity 001f:0001:0006:000e [ 6980.942016] eth1: Firmware determined as Lucent/Agere 6.14 [ 6980.947751] eth1: Attempting to download firmware agere_sta_fw.bin [ 6980.947795] hermes_dld: AUX enable returned 0 [ 6980.948858] hermes_dld: AUX disable returned 0 [ 6980.948867] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 6980.948875] eth1: Read PDA returned 0 [ 6980.949026] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin [ 6981.124174] hermes_dld: AUX enable returned 0 [ 6981.124191] hermes_dld: Enabling volatile, EP 0x000f8000 [ 6981.125282] hermes_dld: PROGRAM_ENABLE returned 0 [ 6981.125290] eth1: Program init returned 0 [ 6981.125301] hermes_dld: Programming block of length 60416 to address=20 0x001f0000 [ 6981.173510] hermes_dld: Programming block of length 4096 to address=20 0x001ef000 [ 6981.176787] eth1: Program returned 0 [ 6981.176797] hermes_dld: Found record 0x0003 at cb5db41c [ 6981.176819] hermes_dld: Found record 0x0005 at cb5db4a8 [ 6981.176838] hermes_dld: Found record 0x0008 at cb5db4d2 [ 6981.176855] hermes_dld: Found record 0x0007 at cb5db4c4 [ 6981.176873] hermes_dld: Found record 0x0006 at cb5db4b6 [ 6981.176893] hermes_dld: Found record 0x0110 at cb5db59a [ 6981.176926] hermes_dld: Found record 0x0120 at cb5db5ba [ 6981.176959] hermes_dld: Found record 0x0130 at cb5db5da [ 6981.176992] hermes_dld: Found record 0x0140 at cb5db5fa [ 6981.177005] hermes_dld: Found record 0x0150 at cb5db602 [ 6981.177019] hermes_dld: Using default record 0x0160 at dfaaeb60 [ 6981.177052] hermes_dld: Found record 0x0101 at cb5db546 [ 6981.177067] hermes_dld: Found record 0x0103 at cb5db55c [ 6981.177087] hermes_dld: Found record 0x0104 at cb5db56c [ 6981.177099] hermes_dld: Found record 0x0105 at cb5db572 [ 6981.177111] hermes_dld: Found record 0x0105 at cb5db572 [ 6981.177123] hermes_dld: Found record 0x0105 at cb5db572 [ 6981.177136] hermes_dld: Found record 0x0107 at cb5db57e [ 6981.177148] hermes_dld: Found record 0x0109 at cb5db58c [ 6981.177166] hermes_dld: Using default record 0x0161 at dfaaeb80 [ 6981.177383] eth1: Apply PDA returned 0 [ 6981.177448] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000= ,=20 r2 0x0000 [ 6981.177478] hermes_dld: AUX disable returned 0 [ 6981.188120] eth1: Program end returned 0 [ 6981.188130] eth1: hermes_present returned 1 [ 6981.188945] eth1: Hardware identity 0005:0002:0001:0002 [ 6981.189073] eth1: Station identity 001f:0002:0009:0030 [ 6981.189084] eth1: Firmware determined as Lucent/Agere 9.48 [ 6981.189093] eth1: Ad-hoc demo mode supported [ 6981.189100] eth1: IEEE standard IBSS ad-hoc mode supported [ 6981.189107] eth1: WEP supported, 104-bit key [ 6981.189116] eth1: WPA-PSK supported [ 6981.235504] eth1: MAC address 00:02:2d:26:95:6c [ 6981.235622] eth1: Station name "HERMES I" [ 6981.237111] eth1: ready [ 6981.242087] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f [ 6982.094203] orinoco_irq_tasklet called [ 6989.363836] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot= =20 0 [ 7294.746774] orinoco 0.15 (David Gibson ,=20 Pavel Roskin , et al) [ 7297.297428] orinoco_cs 0.15 (David Gibson = ,=20 Pavel Roskin , et al) [ 7301.789418] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted=20 into slot 0 [ 7301.789871] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 [ 7301.790700] orinoco_cs_config: mem =3D 00010100 [ 7301.790710] orinoco_cs_config: iobase =3D 00010100, spacing =3D 0 [ 7301.879237] eth1: Hardware identity 0005:0002:0001:0002 [ 7301.879365] eth1: Station identity 001f:0001:0006:000e [ 7301.879378] eth1: Firmware determined as Lucent/Agere 6.14 [ 7301.882473] eth1: Attempting to download firmware agere_sta_fw.bin [ 7301.882518] hermes_dld: AUX enable returned 0 [ 7301.883633] hermes_dld: AUX disable returned 0 [ 7301.883642] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 7301.883650] eth1: Read PDA returned 0 [ 7301.887122] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin [ 7302.010646] hermes_dld: AUX enable returned 0 [ 7302.010662] hermes_dld: Enabling volatile, EP 0x000f8000 [ 7302.011752] hermes_dld: PROGRAM_ENABLE returned 0 [ 7302.011760] eth1: Program init returned 0 [ 7302.011769] hermes_dld: Programming block of length 60416 to address=20 0x001f0000 [ 7302.059935] hermes_dld: Programming block of length 4096 to address=20 0x001ef000 [ 7302.063209] eth1: Program returned 0 [ 7302.063220] hermes_dld: Found record 0x0003 at da7e941c [ 7302.063241] hermes_dld: Found record 0x0005 at da7e94a8 [ 7302.063260] hermes_dld: Found record 0x0008 at da7e94d2 [ 7302.063277] hermes_dld: Found record 0x0007 at da7e94c4 [ 7302.063295] hermes_dld: Found record 0x0006 at da7e94b6 [ 7302.063315] hermes_dld: Found record 0x0110 at da7e959a [ 7302.063349] hermes_dld: Found record 0x0120 at da7e95ba [ 7302.063382] hermes_dld: Found record 0x0130 at da7e95da [ 7302.063414] hermes_dld: Found record 0x0140 at da7e95fa [ 7302.063428] hermes_dld: Found record 0x0150 at da7e9602 [ 7302.063441] hermes_dld: Using default record 0x0160 at dfaaeb60 [ 7302.063474] hermes_dld: Found record 0x0101 at da7e9546 [ 7302.063490] hermes_dld: Found record 0x0103 at da7e955c [ 7302.063509] hermes_dld: Found record 0x0104 at da7e956c [ 7302.063522] hermes_dld: Found record 0x0105 at da7e9572 [ 7302.063534] hermes_dld: Found record 0x0105 at da7e9572 [ 7302.063546] hermes_dld: Found record 0x0105 at da7e9572 [ 7302.063558] hermes_dld: Found record 0x0107 at da7e957e [ 7302.063570] hermes_dld: Found record 0x0109 at da7e958c [ 7302.063589] hermes_dld: Using default record 0x0161 at dfaaeb80 [ 7302.063803] eth1: Apply PDA returned 0 [ 7302.063869] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000= ,=20 r2 0x0000 [ 7302.063898] hermes_dld: AUX disable returned 0 [ 7302.074535] eth1: Program end returned 0 [ 7302.074544] eth1: hermes_present returned 1 [ 7302.075360] eth1: Hardware identity 0005:0002:0001:0002 [ 7302.075487] eth1: Station identity 001f:0002:0009:0030 [ 7302.075499] eth1: Firmware determined as Lucent/Agere 9.48 [ 7302.075507] eth1: Ad-hoc demo mode supported [ 7302.075514] eth1: IEEE standard IBSS ad-hoc mode supported [ 7302.075521] eth1: WEP supported, 104-bit key [ 7302.075529] eth1: WPA-PSK supported [ 7302.123262] eth1: MAC address 00:02:2d:26:95:6c [ 7302.123380] eth1: Station name "HERMES I" [ 7302.124728] eth1: ready [ 7302.129732] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f [ 7303.543710] eth1: Lucent/Agere firmware doesn't support manual roaming [ 7303.764870] eth1: New link status: Connected (0001) [ 8305.769395] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot= =20 0 [ 8314.102846] orinoco 0.15 (David Gibson ,=20 Pavel Roskin , et al) [ 8317.290790] orinoco_cs 0.15 (David Gibson = ,=20 Pavel Roskin , et al) [ 8322.322634] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted=20 into slot 0 [ 8322.323093] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 [ 8322.330460] orinoco_cs_config: mem =3D 00010100 [ 8322.330484] orinoco_cs_config: iobase =3D 00010100, spacing =3D 0 [ 8322.412797] eth1: Hardware identity 0005:0002:0001:0002 [ 8322.412914] eth1: Station identity 001f:0001:0006:000e [ 8322.412926] eth1: Firmware determined as Lucent/Agere 6.14 [ 8322.421875] eth1: Attempting to download firmware agere_sta_fw.bin [ 8322.421918] hermes_dld: AUX enable returned 0 [ 8322.423056] hermes_dld: AUX disable returned 0 [ 8322.423065] hermes_dld: Actual PDA length 998, Max allowed 1000 [ 8322.423073] eth1: Read PDA returned 0 [ 8322.426865] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin [ 8322.549971] hermes_dld: AUX enable returned 0 [ 8322.549988] hermes_dld: Enabling volatile, EP 0x000f8000 [ 8322.551067] hermes_dld: PROGRAM_ENABLE returned 0 [ 8322.551076] eth1: Program init returned 0 [ 8322.551086] hermes_dld: Programming block of length 60416 to address=20 0x001f0000 [ 8322.599269] hermes_dld: Programming block of length 4096 to address=20 0x001ef000 [ 8322.602501] eth1: Program returned 0 [ 8322.602510] hermes_dld: Found record 0x0003 at da7e9c1c [ 8322.602580] hermes_dld: Found record 0x0005 at da7e9ca8 [ 8322.602600] hermes_dld: Found record 0x0008 at da7e9cd2 [ 8322.602617] hermes_dld: Found record 0x0007 at da7e9cc4 [ 8322.602635] hermes_dld: Found record 0x0006 at da7e9cb6 [ 8322.602655] hermes_dld: Found record 0x0110 at da7e9d9a [ 8322.602689] hermes_dld: Found record 0x0120 at da7e9dba [ 8322.602722] hermes_dld: Found record 0x0130 at da7e9dda [ 8322.602755] hermes_dld: Found record 0x0140 at da7e9dfa [ 8322.602768] hermes_dld: Found record 0x0150 at da7e9e02 [ 8322.602781] hermes_dld: Using default record 0x0160 at dfaaeb60 [ 8322.602815] hermes_dld: Found record 0x0101 at da7e9d46 [ 8322.602830] hermes_dld: Found record 0x0103 at da7e9d5c [ 8322.602850] hermes_dld: Found record 0x0104 at da7e9d6c [ 8322.602862] hermes_dld: Found record 0x0105 at da7e9d72 [ 8322.602874] hermes_dld: Found record 0x0105 at da7e9d72 [ 8322.602886] hermes_dld: Found record 0x0105 at da7e9d72 [ 8322.602898] hermes_dld: Found record 0x0107 at da7e9d7e [ 8322.602911] hermes_dld: Found record 0x0109 at da7e9d8c [ 8322.602929] hermes_dld: Using default record 0x0161 at dfaaeb80 [ 8322.603145] eth1: Apply PDA returned 0 [ 8322.603210] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000= ,=20 r2 0x0000 [ 8322.603239] hermes_dld: AUX disable returned 0 [ 8322.613880] eth1: Program end returned 0 [ 8322.613889] eth1: hermes_present returned 1 [ 8322.614695] eth1: Hardware identity 0005:0002:0001:0002 [ 8322.614822] eth1: Station identity 001f:0002:0009:0030 [ 8322.614833] eth1: Firmware determined as Lucent/Agere 9.48 [ 8322.614841] eth1: Ad-hoc demo mode supported [ 8322.614848] eth1: IEEE standard IBSS ad-hoc mode supported [ 8322.614856] eth1: WEP supported, 104-bit key [ 8322.614864] eth1: WPA-PSK supported [ 8322.654749] eth1: MAC address 00:02:2d:26:95:6c [ 8322.654867] eth1: Station name "HERMES I" [ 8322.656396] eth1: ready [ 8322.661285] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f [ 8323.978313] eth1: Lucent/Agere firmware doesn't support manual roaming [ 8324.229756] eth1: New link status: Connected (0001) [11629.643087] PM: Syncing filesystems ... done. [11630.186755] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin [11630.419902] Freezing user space processes ... (elapsed 0.07 seconds)=20 done. [11630.497044] Freezing remaining freezable tasks ... (elapsed 0.00 seconds= )=20 done. [11630.497764] Suspending console(s) (use no_console_suspend to debug) [11630.506847] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11630.507372] sd 0:0:0:0: [sda] Stopping disk [11631.202124] pci 0000:01:00.0: power state changed by ACPI to D3 [11631.216170] e100 0000:00:0a.0: PME# enabled [11631.216386] e100 0000:00:0a.0: wake-up capability enabled by ACPI [11631.285918] ALI 5451 0000:00:06.0: PCI INT A disabled [11631.299262] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [11632.082428] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [11632.095668] ohci_hcd 0000:00:02.0: PCI INT A disabled [11632.095774] ohci_hcd 0000:00:02.0: PME# disabled [11632.125164] ACPI: Preparing to enter system sleep state S3 [11632.125584] Back to C! [11632.125584] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf= =20 (was 0x500001ff, writing 0x5000010b) [11632.125584] pci 0000:00:12.0: restoring config space at offset 0xf (was= =20 0x1ff, writing 0x10b) [11632.125584] pci 0000:01:00.0: restoring config space at offset 0xf (was= =20 0x1ff, writing 0x10b) [11632.139243] ACPI: Waking up from system sleep state S3 [11632.160038] agpgart-ali 0000:00:00.0: PME# disabled [11632.160093] pci 0000:00:01.0: setting latency timer to 64 [11632.160127] ohci_hcd 0000:00:02.0: PME# disabled [11632.172328] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11=20 (level, low) -> IRQ 11 [11632.172360] ohci_hcd 0000:00:02.0: PME# disabled [11632.227629] usb usb1: root hub lost power or was reset [11632.239210] pata_ali 0000:00:04.0: restoring config space at offset 0x1= =20 (was 0x2900001, writing 0x2900005) [11632.239262] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [11632.246377] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [11632.246413] ALI 5451 0000:00:06.0: restoring config space at offset 0xf= =20 (was 0x180201ff, writing 0x1802010b) [11632.246660] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [11632.246694] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11=20 (level, low) -> IRQ 11 [11632.515609] pci 0000:00:07.0: PME# disabled [11632.515636] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [11632.528969] e100 0000:00:0a.0: restoring config space at offset 0xf (was= =20 0x380801ff, writing 0x3808010b) [11632.529056] e100 0000:00:0a.0: wake-up capability disabled by ACPI [11632.529070] e100 0000:00:0a.0: PME# disabled [11632.529147] yenta_cardbus 0000:00:10.0: restoring config space at offset= =20 0x6 (was 0x50200, writing 0xb0050200) [11632.823109] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [11632.823119] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [11632.829623] ata2.00: configured for UDMA/33 [11633.512307] pci 0000:00:12.0: PME# disabled [11633.512337] pci 0000:01:00.0: PME# disabled [11633.517814] sd 0:0:0:0: [sda] Starting disk [11634.395960] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [11634.395971] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [11634.409588] ata1.00: configured for UDMA/33 [11634.435091] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0= =20 GB/18.6 GiB) [11634.435219] sd 0:0:0:0: [sda] Write Protect is off [11634.435228] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [11634.435418] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [11634.689684] eth1: Attempting to download firmware agere_sta_fw.bin [11634.689715] hermes_dld: AUX enable returned 0 [11634.690745] hermes_dld: AUX disable returned 0 [11634.690752] hermes_dld: Actual PDA length 998, Max allowed 1000 [11634.690758] eth1: Read PDA returned 0 [11634.772931] hermes_dld: AUX enable returned 0 [11634.772938] hermes_dld: Enabling volatile, EP 0x000f8000 [11634.774038] hermes_dld: PROGRAM_ENABLE returned 0 [11634.774043] eth1: Program init returned 0 [11634.774052] hermes_dld: Programming block of length 60416 to address=20 0x001f0000 [11634.822310] hermes_dld: Programming block of length 4096 to address=20 0x001ef000 [11634.825591] eth1: Program returned 0 [11634.825601] hermes_dld: Found record 0x0003 at ddeae81c [11634.825621] hermes_dld: Found record 0x0005 at ddeae8a8 [11634.825639] hermes_dld: Found record 0x0008 at ddeae8d2 [11634.825654] hermes_dld: Found record 0x0007 at ddeae8c4 [11634.825671] hermes_dld: Found record 0x0006 at ddeae8b6 [11634.825688] hermes_dld: Found record 0x0110 at ddeae99a [11634.825720] hermes_dld: Found record 0x0120 at ddeae9ba [11634.825752] hermes_dld: Found record 0x0130 at ddeae9da [11634.825783] hermes_dld: Found record 0x0140 at ddeae9fa [11634.825795] hermes_dld: Found record 0x0150 at ddeaea02 [11634.825807] hermes_dld: Using default record 0x0160 at dfaaeb60 [11634.825839] hermes_dld: Found record 0x0101 at ddeae946 [11634.825852] hermes_dld: Found record 0x0103 at ddeae95c [11634.825871] hermes_dld: Found record 0x0104 at ddeae96c [11634.825882] hermes_dld: Found record 0x0105 at ddeae972 [11634.825893] hermes_dld: Found record 0x0105 at ddeae972 [11634.825904] hermes_dld: Found record 0x0105 at ddeae972 [11634.825914] hermes_dld: Found record 0x0107 at ddeae97e [11634.825925] hermes_dld: Found record 0x0109 at ddeae98c [11634.825943] hermes_dld: Using default record 0x0161 at dfaaeb80 [11634.826157] eth1: Apply PDA returned 0 [11634.826220] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000= ,=20 r2 0x0000 [11634.826247] hermes_dld: AUX disable returned 0 [11634.836892] eth1: Program end returned 0 [11634.836899] eth1: hermes_present returned 1 [11634.848626] Restarting tasks ... <6>eth1: New link status: Connected=20 (0001) [11634.998438] done. [11715.652477]=20 [11715.652498] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D [11715.652520] [ INFO: possible circular locking dependency detected ] [11715.652534] 2.6.29-rc2-1avb #11 [11715.652541] ------------------------------------------------------- [11715.652550] s2disk/25519 is trying to acquire lock: [11715.652562] (&fb_info->lock){--..}, at: [] fb_mmap+0x97/0x170 [11715.652623]=20 [11715.652625] but task is already holding lock: [11715.652632] (&mm->mmap_sem){----}, at: [] sys_mmap2+0x8e/0xc0 [11715.652669]=20 [11715.652671] which lock already depends on the new lock. [11715.652675]=20 [11715.652681]=20 [11715.652683] the existing dependency chain (in reverse order) is: [11715.652691]=20 [11715.652693] -> #1 (&mm->mmap_sem){----}: [11715.652707] [] __lock_acquire+0x129f/0x1930 [11715.652730] [] lock_acquire+0x5c/0x80 [11715.652742] [] might_fault+0x77/0xa0 [11715.652764] [] copy_from_user+0x35/0x130 [11715.652782] [] fb_ioctl+0x1d5/0x3f0 [11715.652797] [] vfs_ioctl+0x20/0x80 [11715.652832] [] do_vfs_ioctl+0x72/0x570 [11715.652845] [] sys_ioctl+0x39/0x70 [11715.652857] [] sysenter_do_call+0x12/0x31 [11715.652870] [] 0xffffffff [11715.652973]=20 [11715.652975] -> #0 (&fb_info->lock){--..}: [11715.652988] [] __lock_acquire+0x140c/0x1930 [11715.653000] [] lock_acquire+0x5c/0x80 [11715.653011] [] mutex_lock_nested+0xba/0x2f0 [11715.653032] [] fb_mmap+0x97/0x170 [11715.653044] [] mmap_region+0x1d6/0x530 [11715.653067] [] do_mmap_pgoff+0x1d3/0x2f0 [11715.653079] [] sys_mmap2+0xad/0xc0 [11715.653091] [] sysenter_do_call+0x12/0x31 [11715.653102] [] 0xffffffff [11715.653116]=20 [11715.653119] other info that might help us debug this: [11715.653122]=20 [11715.653130] 1 lock held by s2disk/25519: [11715.653137] #0: (&mm->mmap_sem){----}, at: []=20 sys_mmap2+0x8e/0xc0 [11715.653156]=20 [11715.653158] stack backtrace: [11715.653170] Pid: 25519, comm: s2disk Not tainted 2.6.29-rc2-1avb #11 [11715.653179] Call Trace: [11715.653190] [] ? printk+0x18/0x20 [11715.653202] [] print_circular_bug_tail+0xcf/0xe0 [11715.653213] [] __lock_acquire+0x140c/0x1930 [11715.653224] [] ? trace_hardirqs_on+0xb/0x10 [11715.653242] [] ? _spin_unlock_irqrestore+0x35/0x60 [11715.653254] [] ? lock_release_holdtime+0x35/0x210 [11715.653265] [] lock_acquire+0x5c/0x80 [11715.653277] [] ? fb_mmap+0x97/0x170 [11715.653287] [] mutex_lock_nested+0xba/0x2f0 [11715.653298] [] ? fb_mmap+0x97/0x170 [11715.653309] [] ? fb_mmap+0x97/0x170 [11715.653335] [] ? kmem_cache_alloc+0xad/0x100 [11715.653347] [] fb_mmap+0x97/0x170 [11715.653358] [] mmap_region+0x1d6/0x530 [11715.653371] [] ? arch_get_unmapped_area_topdown+0x10d/0x170 [11715.653383] [] do_mmap_pgoff+0x1d3/0x2f0 [11715.653395] [] sys_mmap2+0xad/0xc0 [11715.653406] [] sysenter_do_call+0x12/0x31 [11718.835886] Syncing filesystems ... done. [11718.850067] Freezing user space processes ... (elapsed 0.04 seconds)=20 done. [11718.892540] Freezing remaining freezable tasks ... (elapsed 0.00 seconds= )=20 done. [11718.897405] PM: Shrinking memory... =08-=08\=08|=08/=08-=08\=08|=08done= (63537 pages=20 freed) [11728.581385] PM: Freed 254148 kbytes in 9.68 seconds (26.25 MB/s) [11728.581398] Suspending console(s) (use no_console_suspend to debug) [11728.788933] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11728.829518] e100 0000:00:0a.0: PME# enabled [11728.829949] e100 0000:00:0a.0: wake-up capability enabled by ACPI [11728.885899] ALI 5451 0000:00:06.0: PCI INT A disabled [11728.899188] ALI 5451 0000:00:06.0: power state changed by ACPI to D3 [11729.683443] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [11729.683482] ohci_hcd 0000:00:02.0: PCI INT A disabled [11729.683551] ohci_hcd 0000:00:02.0: PME# disabled [11729.686408] ACPI: Preparing to enter system sleep state S4 [11729.687501] PM: Saving platform NVS memory [11729.688022] PM: Creating hibernation image:=20 [11729.689188] PM: Need to copy 60138 pages [11729.689188] PM: Restoring platform NVS memory [11729.689188] ohci_hcd 0000:00:02.0: restoring config space at offset 0x1= =20 (was 0x2900007, writing 0x2900003) [11729.695297] ACPI: Waking up from system sleep state S4 [11729.708644] agpgart-ali 0000:00:00.0: PME# disabled [11729.708685] pci 0000:00:01.0: setting latency timer to 64 [11729.708710] ohci_hcd 0000:00:02.0: PME# disabled [11729.708741] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11=20 (level, low) -> IRQ 11 [11729.708763] ohci_hcd 0000:00:02.0: PME# disabled [11729.760920] usb usb1: root hub lost power or was reset [11729.760994] pata_ali 0000:00:04.0: restoring config space at offset 0x1= =20 (was 0x2900001, writing 0x2900005) [11729.761030] pata_ali 0000:00:04.0: can't derive routing for PCI INT A [11731.061770] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [11731.061829] ALI 5451 0000:00:06.0: restoring config space at offset 0x1= =20 (was 0xc2900007, writing 0xc2900003) [11731.061981] ALI 5451 0000:00:06.0: power state changed by ACPI to D0 [11731.062006] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11=20 (level, low) -> IRQ 11 [11731.222663] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [11731.222675] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out [11731.236136] ata1.00: configured for UDMA/33 [11731.236399] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0= =20 GB/18.6 GiB) [11731.236487] sd 0:0:0:0: [sda] Write Protect is off [11731.236496] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [11731.236629] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= =20 doesn't support DPO or FUA [11731.352259] pci 0000:00:07.0: PME# disabled [11731.352283] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001) [11731.365579] e100 0000:00:0a.0: restoring config space at offset 0xf (was= =20 0x38080100, writing 0x3808010b) [11731.365612] e100 0000:00:0a.0: restoring config space at offset 0x6 (was= =20 0x0, writing 0xf7d00000) [11731.365626] e100 0000:00:0a.0: restoring config space at offset 0x5 (was= =20 0x1, writing 0xeb41) [11731.365639] e100 0000:00:0a.0: restoring config space at offset 0x4 (was= =20 0x0, writing 0xf7efd000) [11731.365652] e100 0000:00:0a.0: restoring config space at offset 0x3 (was= =20 0x0, writing 0x4008) [11731.365668] e100 0000:00:0a.0: restoring config space at offset 0x1 (was= =20 0x2900000, writing 0x2900007) [11731.365695] e100 0000:00:0a.0: wake-up capability disabled by ACPI [11731.365706] e100 0000:00:0a.0: PME# disabled [11731.365740] yenta_cardbus 0000:00:10.0: restoring config space at offset= =20 0xf (was 0x34001ff, writing 0x5c001ff) [11731.365779] yenta_cardbus 0000:00:10.0: restoring config space at offset= =20 0x4 (was 0x48201000, writing 0x48100000) [11731.365793] yenta_cardbus 0000:00:10.0: restoring config space at offset= =20 0x3 (was 0x24008, writing 0x2a808) [11731.365809] yenta_cardbus 0000:00:10.0: restoring config space at offset= =20 0x1 (was 0x2100003, writing 0x2100007) [11731.509243] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out [11731.509252] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out [11731.532672] ata2.00: configured for UDMA/33 [11732.076399] yenta_cardbus 0000:00:11.0: restoring config space at offset= =20 0xf (was 0x10001ff, writing 0x58001ff) [11732.076439] yenta_cardbus 0000:00:11.0: restoring config space at offset= =20 0x4 (was 0x48202000, writing 0x48101000) [11732.076454] yenta_cardbus 0000:00:11.0: restoring config space at offset= =20 0x3 (was 0x824000, writing 0x82a800) [11732.076471] yenta_cardbus 0000:00:11.0: restoring config space at offset= =20 0x1 (was 0x4900003, writing 0x4900007) [11732.212253] yenta_cardbus 0000:00:11.1: restoring config space at offset= =20 0xf (was 0x10002ff, writing 0x58002ff) [11732.212294] yenta_cardbus 0000:00:11.1: restoring config space at offset= =20 0x4 (was 0x48203000, writing 0x48102000) [11732.212308] yenta_cardbus 0000:00:11.1: restoring config space at offset= =20 0x3 (was 0x824000, writing 0x82a800) [11732.212325] yenta_cardbus 0000:00:11.1: restoring config space at offset= =20 0x1 (was 0x4900003, writing 0x4900007) [11732.348911] pci 0000:00:12.0: PME# disabled [11732.348930] pci 0000:01:00.0: PME# disabled [11732.352500] sd 0:0:0:0: [sda] Starting disk [11732.630082] eth1: Attempting to download firmware agere_sta_fw.bin [11732.630135] hermes_dld: AUX enable returned 0 [11732.632308] hermes_dld: AUX disable returned 0 [11732.632315] hermes_dld: Actual PDA length 998, Max allowed 1000 [11732.632321] eth1: Read PDA returned 0 [11732.632332] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin [11792.632415] eth1: Cannot find firmware agere_sta_fw.bin [11792.632430] eth1: Error -2 re-initializing firmware [11792.632444] PM: Device 0.0 failed to restore: error -5 [11792.719661] Restarting tasks ... done. [11799.239948] toshiba_acpi: Re-enabled hotkeys --Boundary-01=_FS1fJSZ8SIevdLG Content-Type: text/plain; charset="us-ascii"; name="config" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="config" # # Automatically generated make config: don't edit # Linux kernel version: 2.6.29-rc2 # Sat Jan 17 15:11:19 2009 # # CONFIG_64BIT is not set CONFIG_X86_32=y # CONFIG_X86_64 is not set CONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y # CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y CONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y # CONFIG_TASK_DELAY_ACCT is not set CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_TREE=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y # CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set CONFIG_TRACEPOINTS=y CONFIG_MARKERS=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_KRETPROBES=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y # CONFIG_TREE_RCU is not set # CONFIG_PREEMPT_RCU is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_FREEZER=y # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_SMP is not set CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_VSMP is not set # CONFIG_X86_RDC321X is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set # CONFIG_MEMTEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CPU=y CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_X86_DEBUGCTLMSR=y CONFIG_PROCESSOR_SELECT=y CONFIG_CPU_SUP_INTEL=y # CONFIG_CPU_SUP_CYRIX_32 is not set # CONFIG_CPU_SUP_AMD is not set # CONFIG_CPU_SUP_CENTAUR_32 is not set # CONFIG_CPU_SUP_TRANSMETA_32 is not set # CONFIG_CPU_SUP_UMC_32 is not set CONFIG_X86_DS=y CONFIG_X86_PTRACE_BTS=y # CONFIG_HPET_TIMER is not set CONFIG_DMI=y # CONFIG_IOMMU_HELPER is not set # CONFIG_IOMMU_API is not set CONFIG_NR_CPUS=1 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # CONFIG_X86_UP_APIC is not set # CONFIG_X86_MCE is not set CONFIG_VM86=y CONFIG_TOSHIBA=m # CONFIG_I8K is not set CONFIG_X86_REBOOTFIXUPS=y # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_3G_OPT is not set # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_2G_OPT is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_X86_PAE is not set # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW_64K=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_MTRR_SANITIZER is not set CONFIG_X86_PAT=y # CONFIG_EFI is not set CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_300=y # CONFIG_HZ_1000 is not set CONFIG_HZ=300 CONFIG_SCHED_HRTICK=y # CONFIG_KEXEC is not set CONFIG_PHYSICAL_START=0x100000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x100000 CONFIG_COMPAT_VDSO=y # CONFIG_CMDLINE_BOOL is not set # # Power management and ACPI options # CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y # CONFIG_ACPI_PROCFS is not set # CONFIG_ACPI_PROCFS_POWER is not set CONFIG_ACPI_SYSFS_POWER=y # CONFIG_ACPI_PROC_EVENT is not set CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m CONFIG_ACPI_DOCK=y CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m CONFIG_ACPI_CUSTOM_DSDT_FILE="" # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_PCI_SLOT=m CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is not set # CONFIG_ACPI_SBS is not set # CONFIG_APM is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=m # CONFIG_X86_POWERNOW_K6 is not set # CONFIG_X86_POWERNOW_K7 is not set # CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_GX_SUSPMOD is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_SPEEDSTEP_ICH is not set # CONFIG_X86_SPEEDSTEP_SMI is not set # CONFIG_X86_P4_CLOCKMOD is not set # CONFIG_X86_CPUFREQ_NFORCE2 is not set # CONFIG_X86_LONGRUN is not set # CONFIG_X86_LONGHAUL is not set # CONFIG_X86_E_POWERSAVER is not set # # shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # # Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set # CONFIG_PCI_GOOLPC is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set CONFIG_ISA_DMA_API=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # CONFIG_OLPC is not set CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m CONFIG_PCMCIA_LOAD_CIS=y # CONFIG_PCMCIA_IOCTL is not set CONFIG_CARDBUS=y # # PC-card bridges # CONFIG_YENTA=m # CONFIG_YENTA_O2 is not set # CONFIG_YENTA_RICOH is not set # CONFIG_YENTA_TI is not set CONFIG_YENTA_TOSHIBA=y # CONFIG_PD6729 is not set # CONFIG_I82092 is not set # CONFIG_I82365 is not set # CONFIG_TCIC is not set CONFIG_PCMCIA_PROBE=y CONFIG_PCCARD_NONSTATIC=m # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_HAVE_ATOMIC_IOMAP=y CONFIG_NET=y # # Networking options # CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=m CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y # CONFIG_IP_ROUTE_MULTIPATH is not set # CONFIG_IP_ROUTE_VERBOSE is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set CONFIG_IRDA=m # # IrDA protocols # CONFIG_IRLAN=m CONFIG_IRNET=m CONFIG_IRCOMM=m CONFIG_IRDA_ULTRA=y # # IrDA options # CONFIG_IRDA_CACHE_LAST_LSAP=y CONFIG_IRDA_FAST_RR=y # CONFIG_IRDA_DEBUG is not set # # Infrared-port device drivers # # # SIR device drivers # # CONFIG_IRTTY_SIR is not set # # Dongle support # # CONFIG_KINGSUN_DONGLE is not set # CONFIG_KSDAZZLE_DONGLE is not set # CONFIG_KS959_DONGLE is not set # # FIR device drivers # # CONFIG_USB_IRDA is not set # CONFIG_SIGMATEL_FIR is not set # CONFIG_NSC_FIR is not set # CONFIG_WINBOND_FIR is not set # CONFIG_TOSHIBA_FIR is not set CONFIG_SMC_IRCC_FIR=m # CONFIG_ALI_FIR is not set # CONFIG_VLSI_FIR is not set # CONFIG_VIA_FIR is not set # CONFIG_MCS_FIR is not set CONFIG_BT=m CONFIG_BT_L2CAP=m # CONFIG_BT_SCO is not set CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m # CONFIG_BT_BNEP_MC_FILTER is not set # CONFIG_BT_BNEP_PROTO_FILTER is not set # CONFIG_BT_HIDP is not set # # Bluetooth device drivers # # CONFIG_BT_HCIBTUSB is not set # CONFIG_BT_HCIUART is not set # CONFIG_BT_HCIBCM203X is not set # CONFIG_BT_HCIBPA10X is not set # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIDTL1 is not set # CONFIG_BT_HCIBT3C is not set # CONFIG_BT_HCIBLUECARD is not set # CONFIG_BT_HCIBTUART is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_CFG80211=m # CONFIG_CFG80211_REG_DEBUG is not set CONFIG_NL80211=y CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set # CONFIG_WIMAX is not set CONFIG_RFKILL=m # CONFIG_RFKILL_INPUT is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="\"\"" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y CONFIG_PNP_DEBUG_MESSAGES=y # # Protocols # # CONFIG_ISAPNP is not set # CONFIG_PNPBIOS is not set CONFIG_PNPACPI=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32000 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y CONFIG_IDE=m # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=m CONFIG_IDE_GD_ATA=y # CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEACPI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=m # CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AEC62XX is not set CONFIG_BLK_DEV_ALI15X3=m # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_CS5535 is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # # Other IDE chipsets support # # # Note: most of these also require special kernel boot parameters # # CONFIG_BLK_DEV_4DRIVES is not set # CONFIG_BLK_DEV_ALI14XX is not set # CONFIG_BLK_DEV_DTC2278 is not set # CONFIG_BLK_DEV_HT6560B is not set # CONFIG_BLK_DEV_QD65XX is not set # CONFIG_BLK_DEV_UMC8672 is not set CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y # CONFIG_SATA_PMP is not set # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set CONFIG_PATA_ACPI=m CONFIG_PATA_ALI=m # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5535 is not set # CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_QDI is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_WINBOND_VLB is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # # Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m CONFIG_VETH=m # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_CS89x0 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y # CONFIG_PCMCIA_RAYCS is not set # CONFIG_LIBERTAS is not set # CONFIG_AIRO is not set # CONFIG_ATMEL is not set # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_IWLWIFI_LEDS is not set # CONFIG_HOSTAP is not set CONFIG_HERMES=m # CONFIG_HERMES_CACHE_FW_ON_INIT is not set # CONFIG_PLX_HERMES is not set # CONFIG_TMD_HERMES is not set # CONFIG_NORTEL_HERMES is not set # CONFIG_PCI_HERMES is not set CONFIG_PCMCIA_HERMES=m # CONFIG_PCMCIA_SPECTRUM is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_HSO is not set # CONFIG_NET_PCMCIA is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PPP=m CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set CONFIG_NETCONSOLE=y CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set CONFIG_INPUT_POLLDEV=m # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m # CONFIG_MOUSE_PS2_ALPS is not set # CONFIG_MOUSE_PS2_LOGIPS2PP is not set # CONFIG_MOUSE_PS2_SYNAPTICS is not set # CONFIG_MOUSE_PS2_LIFEBOOK is not set # CONFIG_MOUSE_PS2_TRACKPOINT is not set # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_WISTRON_BTNS is not set # CONFIG_INPUT_ATLAS_BTNS is not set # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=m # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # # CONFIG_SERIAL_8250 is not set CONFIG_FIX_EARLYCON_MEM=y # # Non-8250 serial port support # # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=m # CONFIG_HW_RANDOM_AMD is not set # CONFIG_HW_RANDOM_GEODE is not set # CONFIG_HW_RANDOM_VIA is not set CONFIG_NVRAM=m # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_IPWIRELESS is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_NSC_GPIO is not set # CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set CONFIG_HANGCHECK_TIMER=m # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # # # PC SMBus host controller drivers # CONFIG_I2C_ALI1535=m # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Graphics adapter I2C/DDC channel drivers # # CONFIG_I2C_VOODOO3 is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_ELEKTOR is not set # CONFIG_I2C_PCA_ISA is not set # CONFIG_I2C_PCA_PLATFORM is not set CONFIG_I2C_STUB=m # CONFIG_SCx200_ACB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set # CONFIG_AT24 is not set CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_BQ27x00 is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_K8TEMP is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_CORETEMP is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set CONFIG_SENSORS_LM90=m # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_SENSORS_APPLESMC is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y # CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set CONFIG_ALIM1535_WDT=m # CONFIG_ALIM7101_WDT is not set # CONFIG_SC520_WDT is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set # CONFIG_IBMASR is not set # CONFIG_WAFER_WDT is not set # CONFIG_I6300ESB_WDT is not set # CONFIG_ITCO_WDT is not set # CONFIG_IT8712F_WDT is not set # CONFIG_IT87_WDT is not set # CONFIG_HP_WATCHDOG is not set # CONFIG_SC1200_WDT is not set # CONFIG_PC87413_WDT is not set # CONFIG_60XX_WDT is not set # CONFIG_SBC8360_WDT is not set # CONFIG_SBC7240_WDT is not set # CONFIG_CPU5_WDT is not set # CONFIG_SMSC_SCH311X_WDT is not set # CONFIG_SMSC37B787_WDT is not set # CONFIG_W83627HF_WDT is not set # CONFIG_W83697HF_WDT is not set # CONFIG_W83697UG_WDT is not set # CONFIG_W83877F_WDT is not set # CONFIG_W83977F_WDT is not set # CONFIG_MACHZ_WDT is not set # CONFIG_SBC_EPX_C3_WATCHDOG is not set # # ISA-based Watchdog Cards # # CONFIG_PCWATCHDOG is not set # CONFIG_MIXCOMWD is not set # CONFIG_WDT is not set # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # # Multimedia devices # # # Multimedia core support # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set # CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers # # CONFIG_DAB is not set # # Graphics support # CONFIG_AGP=m CONFIG_AGP_ALI=m # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set # CONFIG_AGP_INTEL is not set # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set # CONFIG_AGP_EFFICEON is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_UVESA=m CONFIG_FB_VESA=y # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I810 is not set # CONFIG_FB_LE80578 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set CONFIG_FB_CYBLA=m # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set CONFIG_LCD_PLATFORM=m CONFIG_BACKLIGHT_CLASS_DEVICE=m # CONFIG_BACKLIGHT_GENERIC is not set # CONFIG_BACKLIGHT_PROGEAR is not set # CONFIG_BACKLIGHT_MBP_NVIDIA is not set # CONFIG_BACKLIGHT_SAHARA is not set # # Display device support # CONFIG_DISPLAY_SUPPORT=m # # Display hardware drivers # # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_LOGO is not set CONFIG_SOUND=m CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_HRTIMER is not set CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_MPU401_UART=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DRIVERS=y # CONFIG_SND_PCSP is not set CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=60 # CONFIG_SND_ISA is not set CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set CONFIG_SND_ALI5451=m # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set # CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SIS7019 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_USB is not set # CONFIG_SND_PCMCIA is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=m # CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set # # USB HID Boot Protocol drivers # CONFIG_USB_KBD=m CONFIG_USB_MOUSE=m # # Special HID drivers # # CONFIG_HID_COMPAT is not set # CONFIG_HID_A4TECH is not set # CONFIG_HID_APPLE is not set # CONFIG_HID_BELKIN is not set # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set # CONFIG_HID_EZKEY is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MONTEREY is not set # CONFIG_HID_NTRIG is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_GREENASIA_FF is not set # CONFIG_HID_TOPSEED is not set # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set # # Enable Host or Gadget support to see Inventra options # # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_WDM=m # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # # see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y # CONFIG_USB_STORAGE_ONETOUCH is not set CONFIG_USB_STORAGE_KARMA=y # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # CONFIG_USB_SERIAL=m # CONFIG_USB_EZUSB is not set CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_FUNSOFT is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set # CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set CONFIG_USB_SERIAL_MOTOROLA=m # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_OTI6858 is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=m CONFIG_RTC_CLASS=m # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y # CONFIG_RTC_INTF_PROC is not set CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=m # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set CONFIG_X86_PLATFORM_DEVICES=y # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_TC1100_WMI is not set # CONFIG_MSI_LAPTOP is not set # CONFIG_PANASONIC_LAPTOP is not set # CONFIG_COMPAL_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_EEEPC_LAPTOP is not set # CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set CONFIG_ACPI_TOSHIBA=m # # Firmware Drivers # CONFIG_EDD=y # CONFIG_EDD_OFF is not set CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # CONFIG_ISCSI_IBFT_FIND is not set # # File systems # CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=m # CONFIG_EXT4DEV_COMPAT is not set CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y # CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=m # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_BTRFS_FS=m CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=866 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=y CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set CONFIG_SQUASHFS=m # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m # CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set CONFIG_CIFS=m CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y CONFIG_CIFS_WEAK_PW_HASH=y # CONFIG_CIFS_UPCALL is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y # CONFIG_MINIX_SUBPARTITION is not set CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set CONFIG_NLS_CODEPAGE_775=m # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set CONFIG_NLS_CODEPAGE_855=m # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set CONFIG_NLS_CODEPAGE_866=m # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set CONFIG_NLS_ISO8859_5=m # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set CONFIG_SLUB_STATS=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_PI_LIST=y CONFIG_RT_MUTEX_TESTER=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y CONFIG_LOCKDEP=y CONFIG_LOCK_STAT=y # CONFIG_DEBUG_LOCKDEP is not set CONFIG_TRACE_IRQFLAGS=y CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_LOCKING_API_SELFTESTS=y CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_VIRTUAL is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set CONFIG_DEBUG_LIST=y CONFIG_DEBUG_SG=y CONFIG_DEBUG_NOTIFIERS=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_KPROBES_SANITY_TEST=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_HW_BRANCH_TRACER=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y # # Tracers # # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SYSPROF_TRACER is not set # CONFIG_SCHED_TRACER is not set CONFIG_CONTEXT_SWITCH_TRACER=y # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_POWER_TRACER is not set # CONFIG_STACK_TRACER is not set # CONFIG_HW_BRANCH_TRACER is not set CONFIG_FTRACE_SELFTEST=y CONFIG_FTRACE_STARTUP_TEST=y # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_STRICT_DEVMEM=y CONFIG_X86_VERBOSE_BOOTUP=y # CONFIG_EARLY_PRINTK is not set CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_X86_PTDUMP is not set CONFIG_DEBUG_RODATA=y # CONFIG_DEBUG_RODATA_TEST is not set # CONFIG_DEBUG_NX_TEST is not set CONFIG_4KSTACKS=y CONFIG_DOUBLEFAULT=y # CONFIG_MMIOTRACE is not set CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_DEBUG_BOOT_PARAMS is not set # CONFIG_CPA_DEBUG is not set # CONFIG_OPTIMIZE_INLINING is not set # # Security options # CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m CONFIG_ASYNC_MEMCPY=m CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=m CONFIG_CRYPTO_ALGAPI2=m CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_BLKCIPHER2=m CONFIG_CRYPTO_HASH=m CONFIG_CRYPTO_HASH2=m CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=m CONFIG_CRYPTO_MANAGER=m CONFIG_CRYPTO_MANAGER2=m CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m # # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m CONFIG_CRYPTO_SEQIV=m # # Block modes # CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m # # Hash modes # CONFIG_CRYPTO_HMAC=m CONFIG_CRYPTO_XCBC=m # # Digest # CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_CRC32C_INTEL is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m # # Ciphers # CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_AES_586=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SALSA20_586=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_TWOFISH_586=m # # Compression # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=m # CONFIG_CRYPTO_HW is not set CONFIG_HAVE_KVM=y # CONFIG_VIRTUALIZATION is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y CONFIG_CRC7=m CONFIG_LIBCRC32C=m CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y --Boundary-01=_FS1fJSZ8SIevdLG-- --nextPart1398193.r780PQfP9Y Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iEYEABECAAYFAkl/VIUACgkQR6LMutpd94yknACgy8O4+77VdusJf/+l48M8WEmu Uv0AoLky1MREMVA13nL3Wj7/zHi2YZY4 =7MPZ -----END PGP SIGNATURE----- --nextPart1398193.r780PQfP9Y-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/