Date: Thu, 5 Mar 2009 16:17:11 +0100
From: Markus Metzger <markus.t.metzger@intel.com>
To: linux-kernel@vger.kernel.org, mingo@elte.hu, tglx@linutronix.de,
       hpa@zytor.com
Cc: markus.t.metzger@intel.com, markus.t.metzger@gmail.com, roland@redhat.com,
       eranian@googlemail.com, oleg@redhat.com, juan.villacis@intel.com,
       ak@linux.jf.intel.com
Subject: [patch 1/4] x86, bts: add selftest for BTS
Message-ID: <20090305161711.A16434@sedona.ch.intel.com>
Mime-Version: 1.0
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 8101
Lines: 295

Add code to test the branch trace store functionality when a cpu
is initialized.

If an error is detected, a WARN()ing is issued and bts is disabled.


Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
---

Index: gits/arch/x86/kernel/ds.c
===================================================================
--- gits.orig/arch/x86/kernel/ds.c	2009-03-03 17:24:56.000000000 +0100
+++ gits/arch/x86/kernel/ds.c	2009-03-03 17:30:36.000000000 +0100
@@ -926,8 +926,217 @@ static const struct ds_configuration ds_
 	.sizeof_rec[ds_pebs]	= 8 * 18,
 };
 
-static void
-ds_configure(const struct ds_configuration *cfg)
+#ifdef CONFIG_X86_DS_SELFTEST
+static int ds_selftest_bts_consistency(const struct bts_trace *trace)
+{
+	int error = 0;
+
+	if (!trace) {
+		printk(KERN_CONT "failed to access trace...");
+		/* Bail out. Other tests are pointless. */
+		return -1;
+	}
+
+	if (!trace->read) {
+		printk(KERN_CONT "bts read not available...");
+		error = -1;
+	}
+
+	/* Do some sanity checks on the trace configuration. */
+	if (!trace->ds.n) {
+		printk(KERN_CONT "empty bts buffer...");
+		error = -1;
+	}
+	if (!trace->ds.size) {
+		printk(KERN_CONT "bad bts trace setup...");
+		error = -1;
+	}
+	if (trace->ds.end !=
+	    (char *) trace->ds.begin + (trace->ds.n * trace->ds.size)) {
+		printk(KERN_CONT "bad bts buffer setup...");
+		error = -1;
+	}
+	if ((trace->ds.top < trace->ds.begin) ||
+	    (trace->ds.end <= trace->ds.top)) {
+		printk(KERN_CONT "bts top out of bounds...");
+		error = -1;
+	}
+
+	return error;
+}
+
+static int ds_selftest_bts_read(struct bts_tracer *tracer,
+				const struct bts_trace *trace,
+				const void *from, const void *to)
+{
+	const unsigned char *at;
+
+	/* Check a few things which do not belong to this test.
+	 * They should be covered by other tests. */
+	if (!trace)
+		return -1;
+
+	if (!trace->read)
+		return -1;
+
+	if (to < from)
+		return -1;
+
+	if (from < trace->ds.begin)
+		return -1;
+
+	if (trace->ds.end < to)
+		return -1;
+
+	if (!trace->ds.size)
+		return -1;
+
+	/* Now to the test itself. */
+	for (at = from; (void *) at < to; at += trace->ds.size) {
+		struct bts_struct bts;
+		size_t index;
+		int error;
+
+		if (((void *) at - trace->ds.begin) % trace->ds.size) {
+			printk(KERN_CONT
+			       "read from non-integer index...");
+			return -1;
+		}
+		index = ((void *) at - trace->ds.begin) / trace->ds.size;
+
+		memset(&bts, 0, sizeof(bts));
+		error = trace->read(tracer, at, &bts);
+		if (error < 0) {
+			printk(KERN_CONT
+			       "error reading bts trace at [%lu] (0x%p)...",
+			       index, at);
+			return error;
+		}
+
+		switch (bts.qualifier) {
+		case BTS_BRANCH:
+			break;
+		default:
+			printk(KERN_CONT
+			       "unexpected bts entry %llu at [%lu] (0x%p)...",
+			       bts.qualifier, index, at);
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+#define DS_SELFTEST_SIZEOF_BUFFER 1021 /* intentionally chose an odd size */
+static int ds_selftest_bts(void)
+{
+	const struct bts_trace *trace;
+	struct bts_tracer *tracer;
+	int error = 0;
+	void *top;
+	unsigned char buffer[DS_SELFTEST_SIZEOF_BUFFER];
+
+	tracer =
+		ds_request_bts(/* task = */ NULL, buffer,
+			       DS_SELFTEST_SIZEOF_BUFFER,
+			       /* ovfl = */ NULL, /* th = */ (size_t)-1,
+			       BTS_KERNEL);
+	if (IS_ERR(tracer)) {
+		error = PTR_ERR(tracer);
+		tracer = NULL;
+
+		printk(KERN_CONT
+		       "initialization failed (err: %d)...", error);
+		goto out;
+	}
+
+	/* The return from the initialization call should already give
+	 * us enough trace. */
+	ds_suspend_bts(tracer);
+
+	/* Let's see if we can access the trace. */
+	trace = ds_read_bts(tracer);
+
+	error = ds_selftest_bts_consistency(trace);
+	if (error < 0)
+		goto out;
+
+	/* If everything went well, we should have a few trace entries. */
+	if (trace->ds.top == trace->ds.begin) {
+		/* It is possible but highly unlikely that we got a
+		 * buffer overflow and end up at exactly the same
+		 * position we started from.
+		 * Let's issue a warning, but continue. */
+		printk(KERN_CONT "no trace/overflow...");
+	}
+
+	/* Let's try to read the trace we collected. */
+	error = ds_selftest_bts_read(tracer, trace,
+				     trace->ds.begin, trace->ds.top);
+	if (error < 0)
+		goto out;
+
+	/* Let's read the trace again. Since we suspended tracing, we should
+	 * get the same result. */
+	top = trace->ds.top;
+
+	trace = ds_read_bts(tracer);
+	error = ds_selftest_bts_consistency(trace);
+	if (error < 0)
+		goto out;
+
+	if (top != trace->ds.top) {
+		printk(KERN_CONT "suspend not working...");
+		error = -1;
+		goto out;
+	}
+
+	/* Let's collect some more trace - see if resume is working. */
+	ds_resume_bts(tracer);
+	ds_suspend_bts(tracer);
+
+	trace = ds_read_bts(tracer);
+
+	error = ds_selftest_bts_consistency(trace);
+	if (error < 0)
+		goto out;
+
+	if (trace->ds.top == top) {
+		/* It is possible but highly unlikely that we got a
+		 * buffer overflow and end up at exactly the same
+		 * position we started from.
+		 * Let's issue a warning and check the full trace. */
+		printk(KERN_CONT
+		       "no resume progress/overflow...");
+
+		error = ds_selftest_bts_read(tracer, trace,
+					     trace->ds.begin, trace->ds.end);
+	} else if (trace->ds.top < top) {
+		/* We had a buffer overflow - the entire buffer should
+		 * contain trace records. */
+		error = ds_selftest_bts_read(tracer, trace,
+					     trace->ds.begin, trace->ds.end);
+	} else {
+		/* It is quite likely that the buffer did not
+		 * overflow. Let's just check the delta trace. */
+		error = ds_selftest_bts_read(tracer, trace,
+					     top, trace->ds.top);
+	}
+	if (error < 0)
+		goto out;
+
+	error = 0;
+
+	/* The final test: release the tracer while tracing is suspended. */
+ out:
+	ds_release_bts(tracer);
+
+	return error;
+}
+#endif /* CONFIG_X86_DS_SELFTEST */
+
+
+static void ds_configure(const struct ds_configuration *cfg)
 {
 	memset(&ds_cfg, 0, sizeof(ds_cfg));
 	ds_cfg = *cfg;
@@ -942,6 +1151,21 @@ ds_configure(const struct ds_configurati
 		printk(KERN_INFO "[ds] pebs not available\n");
 
 	WARN_ON_ONCE(MAX_SIZEOF_DS < (12 * ds_cfg.sizeof_field));
+
+#ifdef CONFIG_X86_DS_SELFTEST
+	if (ds_cfg.ctl[dsf_bts]) {
+		int error;
+
+		printk(KERN_INFO "[ds] bts selftest...");
+		error = ds_selftest_bts();
+		printk(KERN_CONT "%s.\n", (error ? "failed" : "passed"));
+
+		if (error) {
+			WARN(1, "[ds] selftest failed. disabling bts.\n");
+			ds_cfg.ctl[dsf_bts] = 0;
+		}
+	}
+#endif /* CONFIG_X86_DS_SELFTEST */
 }
 
 void __cpuinit ds_init_intel(struct cpuinfo_x86 *c)
Index: gits/arch/x86/Kconfig.debug
===================================================================
--- gits.orig/arch/x86/Kconfig.debug	2009-03-03 17:24:57.000000000 +0100
+++ gits/arch/x86/Kconfig.debug	2009-03-03 17:25:01.000000000 +0100
@@ -176,6 +176,15 @@ config IOMMU_LEAK
 	  Add a simple leak tracer to the IOMMU code. This is useful when you
 	  are debugging a buggy device driver that leaks IOMMU mappings.
 
+config X86_DS_SELFTEST
+    bool "DS selftest"
+    default y
+    depends on DEBUG_KERNEL
+    depends on X86_DS
+	---help---
+	  Perform Debug Store selftests at boot time.
+	  If in doubt, say "N".
+
 config HAVE_MMIOTRACE_SUPPORT
 	def_bool y
 
---------------------------------------------------------------------
Intel GmbH
Dornacher Strasse 1
85622 Feldkirchen/Muenchen Germany
Sitz der Gesellschaft: Feldkirchen bei Muenchen
Geschaeftsfuehrer: Douglas Lusk, Peter Gleissner, Hannes Schwaderer
Registergericht: Muenchen HRB 47456 Ust.-IdNr.
VAT Registration No.: DE129385895
Citibank Frankfurt (BLZ 502 109 00) 600119052

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/