Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 20 Feb 2002 15:44:44 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 20 Feb 2002 15:44:35 -0500 Received: from gw.wmich.edu ([141.218.1.100]:7666 "EHLO gw.wmich.edu") by vger.kernel.org with ESMTP id ; Wed, 20 Feb 2002 15:44:26 -0500 Subject: ide cd-recording not working in 2.4.18-rc2-ac1 From: Ed Sweetman To: linux-kernel@vger.kernel.org Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Evolution/1.0.2 Date: 20 Feb 2002 15:44:32 -0500 Message-Id: <1014237877.441.7.camel@psuedomode> Mime-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I get this on every cd I try and I've tried more than I'd have liked to. Performing OPC... /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 1F 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.003s timeout 40s Track 01: 0 of 628 MB written. write track data: error after 63488 bytes Writing time: 10.171s Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 /usr/bin/cdrecord: Input/output error. close track/session: scsi sendcmd: no error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.001s timeout 480s cmd finished after 0.001s timeout 480s Now I know every cd isn't bad because they used to work in older 2.4.17ish kernels. I have scsi-generic support compiled as a module as well as ide-scsi. This is what the kernel detects the drive as SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: CREATIVE Model: CD-RW RW8438E Rev: FC03 Type: CD-ROM ANSI SCSI revision: 02 That is correct. This is what hdparm tells about the drive /dev/hdc: HDIO_GET_MULTCOUNT failed: Input/output error I/O support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) HDIO_GET_NOWERR failed: Input/output error readonly = 0 (off) BLKRAGET failed: Input/output error HDIO_GETGEO failed: Invalid argument busstate = 1 (on) not sure what else I can get informationwize about what the drive is doing. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/