Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754623AbZCIIXA (ORCPT ); Mon, 9 Mar 2009 04:23:00 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752674AbZCIIUe (ORCPT ); Mon, 9 Mar 2009 04:20:34 -0400 Received: from mail.windriver.com ([147.11.1.11]:37110 "EHLO mail.wrs.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753193AbZCIIUd (ORCPT ); Mon, 9 Mar 2009 04:20:33 -0400 From: Harry Ciao To: linux-kernel@vger.kernel.org, bluesmoke-devel@lists.sourceforge.net Subject: [v1 PATCH 7/8] EDAC: AMD8131 driver source file Date: Mon, 9 Mar 2009 16:08:16 +0800 Message-Id: <1236586097-3830-8-git-send-email-qingtao.cao@windriver.com> X-Mailer: git-send-email 1.5.6.2 In-Reply-To: <1236586097-3830-7-git-send-email-qingtao.cao@windriver.com> References: <1236586097-3830-1-git-send-email-qingtao.cao@windriver.com> <1236586097-3830-2-git-send-email-qingtao.cao@windriver.com> <1236586097-3830-3-git-send-email-qingtao.cao@windriver.com> <1236586097-3830-4-git-send-email-qingtao.cao@windriver.com> <1236586097-3830-5-git-send-email-qingtao.cao@windriver.com> <1236586097-3830-6-git-send-email-qingtao.cao@windriver.com> <1236586097-3830-7-git-send-email-qingtao.cao@windriver.com> X-OriginalArrivalTime: 09 Mar 2009 08:20:28.0025 (UTC) FILETIME=[E76D7E90:01C9A08F] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11914 Lines: 394 Introduce AMD8131 EDAC driver source file, which makes use of error detections on the PCI-X Bridge Controllers on the AMD8131 HyperTransport PCI-X Tunnel. Signed-off-by: Harry Ciao --- drivers/edac/amd8131_edac.c | 376 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 376 insertions(+) create mode 100644 drivers/edac/amd8131_edac.c --- /dev/null +++ b/drivers/edac/amd8131_edac.c @@ -0,0 +1,376 @@ +/* + * amd8131_edac.c, AMD8131 hypertransport chip EDAC kernel module + * + * Copyright (c) 2008 Wind River Systems, Inc. + * + * Authors: Cao Qingtao + * Benjamin Walsh + * Hu Yongqi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "edac_core.h" +#include "edac_module.h" +#include "amd8131_edac.h" + +#define AMD8131_EDAC_REVISION " Ver: 1.0.0 " __DATE__ +#define AMD8131_EDAC_MOD_STR "amd8131_edac" + +/* Wrapper functions for accessing PCI configuration space */ +static void edac_pci_read_dword(struct pci_dev *dev, int reg, u32 *val32) +{ + int ret; + + ret = pci_read_config_dword(dev, reg, val32); + if (ret > 0) + printk(KERN_ERR AMD8131_EDAC_MOD_STR + " PCI Access Read Error at 0x%x\n", reg); +} + +static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32) +{ + int ret; + + ret = pci_write_config_dword(dev, reg, val32); + if (ret > 0) + printk(KERN_ERR AMD8131_EDAC_MOD_STR + " PCI Access Write Error at 0x%x\n", reg); +} + +static char * const bridge_str[] = { + [NORTH_A] = "NORTH A", + [NORTH_B] = "NORTH B", + [SOUTH_A] = "SOUTH A", + [SOUTH_B] = "SOUTH B", + [NO_BRIDGE] = "NO BRIDGE", +}; + +/* Support up to two AMD8131 chipsets on a platform */ +static struct amd8131_dev_info amd8131_devices[] = { + { + .inst = NORTH_A, + .devfn = DEVFN_PCIX_BRIDGE_NORTH_A, + .ctl_name = "AMD8131_PCIX_NORTH_A", + }, + { + .inst = NORTH_B, + .devfn = DEVFN_PCIX_BRIDGE_NORTH_B, + .ctl_name = "AMD8131_PCIX_NORTH_B", + }, + { + .inst = SOUTH_A, + .devfn = DEVFN_PCIX_BRIDGE_SOUTH_A, + .ctl_name = "AMD8131_PCIX_SOUTH_A", + }, + { + .inst = SOUTH_B, + .devfn = DEVFN_PCIX_BRIDGE_SOUTH_B, + .ctl_name = "AMD8131_PCIX_SOUTH_B", + }, + {.inst = NO_BRIDGE,}, +}; + +static void amd8131_pcix_init(struct amd8131_dev_info *dev_info) +{ + u32 val32; + struct pci_dev *dev = dev_info->dev; + + /* First clear error detection flags */ + edac_pci_read_dword(dev, REG_MEM_LIM, &val32); + if (val32 & MEM_LIMIT_MASK) + edac_pci_write_dword(dev, REG_MEM_LIM, val32); + + /* Clear Discard Timer Timedout flag */ + edac_pci_read_dword(dev, REG_INT_CTLR, &val32); + if (val32 & INT_CTLR_DTS) + edac_pci_write_dword(dev, REG_INT_CTLR, val32); + + /* Clear CRC Error flag on link side A */ + edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); + if (val32 & LNK_CTRL_CRCERR_A) + edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); + + /* Clear CRC Error flag on link side B */ + edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); + if (val32 & LNK_CTRL_CRCERR_B) + edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); + + /* + * Then enable all error detections. + * + * Setup Discard Timer Sync Flood Enable, + * System Error Enable and Parity Error Enable. + */ + edac_pci_read_dword(dev, REG_INT_CTLR, &val32); + val32 |= INT_CTLR_PERR | INT_CTLR_SERR | INT_CTLR_DTSE; + edac_pci_write_dword(dev, REG_INT_CTLR, val32); + + /* Enable overall SERR Error detection */ + edac_pci_read_dword(dev, REG_STS_CMD, &val32); + val32 |= STS_CMD_SERREN; + edac_pci_write_dword(dev, REG_STS_CMD, val32); + + /* Setup CRC Flood Enable for link side A */ + edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); + val32 |= LNK_CTRL_CRCFEN; + edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); + + /* Setup CRC Flood Enable for link side B */ + edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); + val32 |= LNK_CTRL_CRCFEN; + edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); +} + +static void amd8131_pcix_exit(struct amd8131_dev_info *dev_info) +{ + u32 val32; + struct pci_dev *dev = dev_info->dev; + + /* Disable SERR, PERR and DTSE Error detection */ + edac_pci_read_dword(dev, REG_INT_CTLR, &val32); + val32 &= ~(INT_CTLR_PERR | INT_CTLR_SERR | INT_CTLR_DTSE); + edac_pci_write_dword(dev, REG_INT_CTLR, val32); + + /* Disable overall System Error detection */ + edac_pci_read_dword(dev, REG_STS_CMD, &val32); + val32 &= ~STS_CMD_SERREN; + edac_pci_write_dword(dev, REG_STS_CMD, val32); + + /* Disable CRC Sync Flood on link side A */ + edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); + val32 &= ~LNK_CTRL_CRCFEN; + edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); + + /* Disable CRC Sync Flood on link side B */ + edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); + val32 &= ~LNK_CTRL_CRCFEN; + edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); +} + +static void amd8131_pcix_check(struct edac_pci_ctl_info *edac_dev) +{ + struct amd8131_dev_info *dev_info = edac_dev->pvt_info; + struct pci_dev *dev = dev_info->dev; + u32 val32; + + /* Check PCI-X Bridge Memory Base-Limit Register for errors */ + edac_pci_read_dword(dev, REG_MEM_LIM, &val32); + if (val32 & MEM_LIMIT_MASK) { + printk(KERN_INFO "Error(s) in mem limit register " + "on %s bridge\n", dev_info->ctl_name); + printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n" + "RTA: %d, STA: %d, MDPE: %d\n", + val32 & MEM_LIMIT_DPE, + val32 & MEM_LIMIT_RSE, + val32 & MEM_LIMIT_RMA, + val32 & MEM_LIMIT_RTA, + val32 & MEM_LIMIT_STA, + val32 & MEM_LIMIT_MDPE); + + val32 |= MEM_LIMIT_MASK; + edac_pci_write_dword(dev, REG_MEM_LIM, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } + + /* Check if Discard Timer timed out */ + edac_pci_read_dword(dev, REG_INT_CTLR, &val32); + if (val32 & INT_CTLR_DTS) { + printk(KERN_INFO "Error(s) in interrupt and control register " + "on %s bridge\n", dev_info->ctl_name); + printk(KERN_INFO "DTS: %d\n", val32 & INT_CTLR_DTS); + + val32 |= INT_CTLR_DTS; + edac_pci_write_dword(dev, REG_INT_CTLR, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } + + /* Check if CRC error happens on link side A */ + edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); + if (val32 & LNK_CTRL_CRCERR_A) { + printk(KERN_INFO "Error(s) in link conf and control register " + "on %s bridge\n", dev_info->ctl_name); + printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_A); + + val32 |= LNK_CTRL_CRCERR_A; + edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } + + /* Check if CRC error happens on link side B */ + edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); + if (val32 & LNK_CTRL_CRCERR_B) { + printk(KERN_INFO "Error(s) in link conf and control register " + "on %s bridge\n", dev_info->ctl_name); + printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_B); + + val32 |= LNK_CTRL_CRCERR_B; + edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } +} + +static struct amd8131_info amd8131_chipset = { + .err_dev = PCI_DEVICE_ID_AMD_8131_APIC, + .devices = amd8131_devices, + .init = amd8131_pcix_init, + .exit = amd8131_pcix_exit, + .check = amd8131_pcix_check, +}; + +/* + * There are 4 PCIX Bridges on ATCA-6101 that share the same PCI Device ID, + * so amd8131_probe() would be called by kernel 4 times, with different + * address of pci_dev for each of them each time. + */ +static int amd8131_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + struct amd8131_dev_info *dev_info; + + for (dev_info = amd8131_chipset.devices; dev_info->inst != NO_BRIDGE; + dev_info++) + if (dev_info->devfn == dev->devfn) + break; + + if (dev_info->inst == NO_BRIDGE) /* should never happen */ + return -ENODEV; + + /* + * We can't call pci_get_device() as we are used to do because + * there are 4 of them but pci_dev_get() instead. + */ + dev_info->dev = pci_dev_get(dev); + + if (pci_enable_device(dev_info->dev)) { + pci_dev_put(dev_info->dev); + printk(KERN_ERR "failed to enable:" + "vendor %x, device %x, devfn %x, name %s\n", + PCI_VENDOR_ID_AMD, amd8131_chipset.err_dev, + dev_info->devfn, dev_info->ctl_name); + return -ENODEV; + } + + /* + * we do not allocate extra private structure for + * edac_pci_ctl_info, but make use of existing + * one instead. + */ + dev_info->edac_idx = edac_pci_alloc_index(); + dev_info->edac_dev = edac_pci_alloc_ctl_info(0, dev_info->ctl_name); + if (!dev_info->edac_dev) + return -ENOMEM; + + dev_info->edac_dev->pvt_info = dev_info; + dev_info->edac_dev->dev = &dev_info->dev->dev; + dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR; + dev_info->edac_dev->ctl_name = dev_info->ctl_name; + dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id; + + if (edac_op_state == EDAC_OPSTATE_POLL) + dev_info->edac_dev->edac_check = amd8131_chipset.check; + + if (amd8131_chipset.init) + amd8131_chipset.init(dev_info); + + if (edac_pci_add_device(dev_info->edac_dev, dev_info->edac_idx) > 0) { + printk(KERN_ERR "failed edac_pci_add_device() for %s\n", + dev_info->ctl_name); + edac_pci_free_ctl_info(dev_info->edac_dev); + return -ENODEV; + } + + printk(KERN_INFO "added one device on AMD8131 " + "vendor %x, device %x, devfn %x, name %s\n", + PCI_VENDOR_ID_AMD, amd8131_chipset.err_dev, + dev_info->devfn, dev_info->ctl_name); + + return 0; +} + +static void amd8131_remove(struct pci_dev *dev) +{ + struct amd8131_dev_info *dev_info; + + for (dev_info = amd8131_chipset.devices; dev_info->inst != NO_BRIDGE; + dev_info++) + if (dev_info->devfn == dev->devfn) + break; + + if (dev_info->inst == NO_BRIDGE) /* should never happen */ + return; + + if (dev_info->edac_dev) { + edac_pci_del_device(dev_info->edac_dev->dev); + edac_pci_free_ctl_info(dev_info->edac_dev); + } + + if (amd8131_chipset.exit) + amd8131_chipset.exit(dev_info); + + pci_dev_put(dev_info->dev); +} + +static const struct pci_device_id amd8131_edac_pci_tbl[] = { + { + PCI_VEND_DEV(AMD, 8131_BRIDGE), + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = 0, + .class_mask = 0, + .driver_data = 0, + }, + { + 0, + } /* table is NULL-terminated */ +}; +MODULE_DEVICE_TABLE(pci, amd8131_edac_pci_tbl); + +static struct pci_driver amd8131_edac_driver = { + .name = AMD8131_EDAC_MOD_STR, + .probe = amd8131_probe, + .remove = amd8131_remove, + .id_table = amd8131_edac_pci_tbl, +}; + +static int __init amd8131_edac_init(void) +{ + /* Only POLL mode supported so far */ + edac_op_state = EDAC_OPSTATE_POLL; + + return pci_register_driver(&amd8131_edac_driver); +} + +static void __exit amd8131_edac_exit(void) +{ + pci_unregister_driver(&amd8131_edac_driver); +} + +module_init(amd8131_edac_init); +module_exit(amd8131_edac_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Cao Qingtao \n"); +MODULE_DESCRIPTION("AMD8131 HyperTransport PCI-X Tunnel EDAC kernel module"); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/