Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 30 Nov 2000 08:09:24 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 30 Nov 2000 08:09:15 -0500 Received: from pop.gmx.net ([194.221.183.20]:44822 "HELO mail.gmx.net") by vger.kernel.org with SMTP id ; Thu, 30 Nov 2000 08:09:00 -0500 From: Norbert Breun Reply-To: nbreun@gmx.de Organization: private Date: Thu, 30 Nov 2000 13:36:32 +0100 X-Mailer: KMail [version 1.1.99] Content-Type: text/plain; charset=US-ASCII To: linux-kernel@vger.kernel.org Subject: 2.4.0-test12-pre3: kernel: APIC error on CPU0: 08(00) /Gigabyte GA-586DX SMP_BOARD MIME-Version: 1.0 Message-Id: <00113013363200.03911@nmb> Content-Transfer-Encoding: 7BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hallo, following errors come when running 2.4.0-test12-pre3 on my Gigabyte GA-586DX SMP_BOARD. Theses errors also appear with 2.4.0-test11 ind prior. Running with 2.2.16 / 2.2.17 no such errors appear: Nov 30 11:33:46 nmb kernel: APIC error on CPU0: 08(00) Nov 30 11:34:09 nmb kernel: APIC error on CPU0: 02(00) Nov 30 11:34:16 nmb kernel: APIC error on CPU0: 08(00) Nov 30 11:34:21 nmb kernel: APIC error on CPU0: 02(00) Nov 30 11:34:30 nmb kernel: APIC error on CPU0: 01(00) Nov 30 11:34:36 nmb kernel: APIC error on CPU0: 02(00) Nov 30 11:34:30 nmb kernel: APIC error on CPU0: 01(00) Nov 30 11:34:31 nmb kernel: APIC error on CPU0: 02(00) Nov 30 11:36:05 nmb kernel: APIC error on CPU0: 04(00) hope this will be helpful for you.... kind regards Norbert ================ cat boot.msg ==================================== Inspecting /boot/System.map-2.2.16-NB Loaded 7901 symbols from /boot/System.map-2.2.16-NB. Symbols match kernel version 2.2.16. Loaded 7 symbols from 1 module. klogd 1.3-3, log source = ksyslog started. <4>Linux version 2.2.16-NB (root@nmb) (gcc version 2.95.2 19991024 (release)) #1 SMP Sun Nov 26 20:36:48 CET 2000 <4>Intel MultiProcessor Specification v1.1 <4> Virtual Wire compatibility mode. <4>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 <4>Processor #0 Pentium(tm) APIC version 17 <4>Processor #1 Pentium(tm) APIC version 17 <4>I/O APIC #2 Version 17 at 0xFEC00000. <4>Processors: 2 <4>mapped APIC to ffffe000 (fee00000) <4>mapped IOAPIC to ffffd000 (fec00000) <4>Detected 200457 kHz processor. <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 399.77 BogoMIPS <4>Memory: 127616k/131072k available (1312k kernel code, 424k reserved, 1644k data, 76k init, 0k bigmem) <4>Dentry hash table entries: 16384 (order 5, 128k) <4>Buffer cache hash table entries: 131072 (order 7, 512k) <4>Page cache hash table entries: 32768 (order 5, 128k) <5>VFS: Diskquotas version dquot_6.4.0 initialized <6>Checking 386/387 coupling... OK, FPU using exception 16 error reporting. <6>Checking 'hlt' instruction... OK. <6>Intel Pentium with F0 0F bug - workaround enabled. <4>POSIX conformance testing by UNIFIX <4>per-CPU timeslice cutoff: 1.56 usecs. <4>CPU0: Intel Pentium MMX stepping 03 <4>calibrating APIC timer ... <4>..... CPU clock speed is 200.4646 MHz. <4>..... system bus clock speed is 66.8214 MHz. <4>Booting processor 1 eip 2000 <4>Calibrating delay loop... 400.59 BogoMIPS <4>OK. <4>CPU1: Intel Pentium MMX stepping 03 <6>Total of 2 processors activated (800.36 BogoMIPS). <4>enabling symmetric IO mode... ...done. <4>ENABLING IO-APIC IRQs <4>init IO_APIC IRQs <4> IO-APIC (apicid-pin) 2-0, 2-20, 2-21, 2-22, 2-23 not connected. <4>number of MP IRQ sources: 21. <4>number of IO-APIC #2 registers: 24. <4>testing the IO APIC....................... <4> <4>IO APIC #2...... <4>.... register #00: 02000000 <4>....... : physical APIC id: 02 <4>.... register #01: 00170011 <4>....... : max redirection entries: 0017 <4>....... : IO APIC version: 0011 <4>.... register #02: 00000000 <4>....... : arbitration: 00 <4>.... IRQ redirection table: <4> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <4> 00 000 00 1 0 0 0 0 0 0 00 <4> 01 000 00 0 0 0 0 0 1 1 59 <4> 02 0FF 0F 0 0 0 0 0 1 1 51 <4> 03 000 00 0 0 0 0 0 1 1 61 <4> 04 000 00 0 0 0 0 0 1 1 69 <4> 05 000 00 0 0 0 0 0 1 1 71 <4> 06 000 00 0 0 0 0 0 1 1 79 <4> 07 000 00 0 0 0 0 0 1 1 81 <4> 08 000 00 0 0 0 0 0 1 1 89 <4> 09 000 00 0 0 0 0 0 1 1 91 <4> 0a 000 00 0 0 0 0 0 1 1 99 <4> 0b 000 00 0 0 0 0 0 1 1 A1 <4> 0c 000 00 0 0 0 0 0 1 1 A9 <4> 0d 000 00 1 0 0 0 0 0 0 00 <4> 0e 000 00 0 0 0 0 0 1 1 B1 <4> 0f 000 00 0 0 0 0 0 1 1 B9 <4> 10 0FF 0F 1 1 0 1 0 1 1 C1 <4> 11 0FF 0F 1 1 0 1 0 1 1 C9 <4> 12 0FF 0F 1 1 0 1 0 1 1 D1 <4> 13 0FF 0F 1 1 0 1 0 1 1 D9 <4> 14 000 00 1 0 0 0 0 0 0 00 <4> 15 000 00 1 0 0 0 0 0 0 00 <4> 16 000 00 1 0 0 0 0 0 0 00 <4> 17 000 00 1 0 0 0 0 0 0 00 <7>IRQ to pin mappings: <7>IRQ0 -> 2 <7>IRQ1 -> 1 <7>IRQ3 -> 3 <7>IRQ4 -> 4 <7>IRQ5 -> 5 <7>IRQ6 -> 6 <7>IRQ7 -> 7 <7>IRQ8 -> 8 <7>IRQ9 -> 9 <7>IRQ10 -> 10 <7>IRQ11 -> 11 <7>IRQ12 -> 12 <7>IRQ13 -> 13 <7>IRQ14 -> 14 <7>IRQ15 -> 15 <7>IRQ16 -> 16 <7>IRQ17 -> 17 <7>IRQ18 -> 18 <7>IRQ19 -> 19 <4>.................................... done. <4>checking TSC synchronization across CPUs: passed. <4>PCI: PCI BIOS revision 2.10 entry at 0xfb4d0, last bus=0 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <4>PCI->APIC IRQ transform: (B0,I8,P0) -> 16 <4>PCI->APIC IRQ transform: (B0,I9,P0) -> 17 <4>PCI->APIC IRQ transform: (B0,I9,P0) -> 17 <4>PCI->APIC IRQ transform: (B0,I10,P0) -> 18 <4>PCI->APIC IRQ transform: (B0,I12,P0) -> 19 <6>Linux NET4.0 for Linux 2.2 <6>Based upon Swansea University Computer Society NET3.039 <6>NET4: Unix domain sockets 1.0 for Linux NET4.0. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>TCP: Hash tables configured (ehash 131072 bhash 65536) <4>Initializing RT netlink socket <4>Starting kswapd v 1.5 <6>Detected PS/2 Mouse Port. <4>pty: 256 Unix98 ptys configured <6>Real Time Clock Driver v1.09 <4>RAM disk driver initialized: 16 RAM disks of 64000K size <6>Uniform Multi-Platform E-IDE driver Revision: 6.30 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>PIIX3: IDE controller on PCI bus 00 dev 39 <4>PIIX3: chipset revision 0 <4>PIIX3: not 100%% native mode: will probe irqs later <4> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio <4> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio <4>hda: IBM-DTTA-351680, ATA DISK drive <4>hdc: ATAPI 44X CDROM, ATAPI CDROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>hda: IBM-DTTA-351680, 16124MB w/462kB Cache, CHS=2055/255/63, (U)DMA <4>hdc: ATAPI 48X CD-ROM drive, 128kB Cache, (U)DMA <6>Uniform CD-ROM driver Revision: 3.11 <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <6>(scsi0) found at PCI 0/12/0 <6>(scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs <6>(scsi0) Downloading sequencer code... 422 instructions downloaded <4>scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.31/3.2.4 <4> <4>scsi : 1 host. <6>(scsi0:0:1:0) Synchronous at 10.0 Mbyte/sec, offset 15. <4> Vendor: SEAGATE Model: ST15150N Rev: 0022 <4> Type: Direct-Access ANSI SCSI revision: 02 <4>Detected scsi disk sda at scsi0, channel 0, id 1, lun 0 <6>(scsi0:0:2:0) Synchronous at 10.0 Mbyte/sec, offset 15. <4> Vendor: TEAC Model: CD-ROM CD-532S Rev: 1.0A <4> Type: CD-ROM ANSI SCSI revision: 02 <4>Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0 <6>(scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec, offset 15. <4> Vendor: TEAC Model: CD-R55S Rev: 1.0L <4> Type: CD-ROM ANSI SCSI revision: 02 <4>Detected scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0 <6>(scsi0:0:4:0) Synchronous at 10.0 Mbyte/sec, offset 15. <4> Vendor: IBM Model: DCAS-34330 Rev: S65A <4> Type: Direct-Access ANSI SCSI revision: 02 <4>Detected scsi disk sdb at scsi0, channel 0, id 4, lun 0 <6>(scsi0:0:5:0) Synchronous at 10.0 Mbyte/sec, offset 15. <4> Vendor: QUANTUM Model: FIREBALL_TM3200S Rev: 300X <4> Type: Direct-Access ANSI SCSI revision: 02 <4>Detected scsi disk sdc at scsi0, channel 0, id 5, lun 0 <4> Vendor: IOMEGA Model: ZIP 100 Rev: E.03 <4> Type: Direct-Access ANSI SCSI revision: 02 <4>Detected scsi removable disk sdd at scsi0, channel 0, id 6, lun 0 <4>scsi : detected 6 SCSI generics 2 SCSI cdroms 4 SCSI disks total. <4>sr0: scsi3-mmc drive: 0x/0x caddy <4>SCSI device sda: hdwr sector= 512 bytes. Sectors= 8388315 [4095 MB] [4.1 GB] <4>SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8467200 [4134 MB] [4.1 GB] <4>SCSI device sdc: hdwr sector= 512 bytes. Sectors= 6281856 [3067 MB] [3.1 GB] <4>sdd : READ CAPACITY failed. <4>sdd : status = 1, message = 00, host = 0, driver = 28 <4>sdd : extended sense code = 2 <4>sdd : block size assumed to be 512 bytes, disk size 1GB. <4>Partition check: <4> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > <4> sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 > <4> sdc: sdc1 sdc2 sdc3 < sdc5 > <4> sdd:scsidisk I/O error: dev 08:30, sector 0 <4> unable to read partition table <4> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 > <4>VFS: Mounted root (ext2 filesystem) readonly. <4>Freeing unused kernel memory: 76k freed <6>Adding Swap: 112416k swap-space (priority -1) <6>Adding Swap: 136544k swap-space (priority -2) <6>Adding Swap: 136512k swap-space (priority -3) <6>Serial driver version 4.27 with no serial options enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A Kernel logging (ksyslog) stopped. Kernel log daemon terminating. ==================== end boot.msg =============================== - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/