Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id <S292665AbSBURhg>; Thu, 21 Feb 2002 12:37:36 -0500
Received: (majordomo@vger.kernel.org) by vger.kernel.org
	id <S292666AbSBURhS>; Thu, 21 Feb 2002 12:37:18 -0500
Received: from CPEdeadbeef0000.cpe.net.cable.rogers.com ([24.100.234.67]:13060
	"HELO coredump.sh0n.net") by vger.kernel.org with SMTP
	id <S292665AbSBURhB>; Thu, 21 Feb 2002 12:37:01 -0500
Subject: [PROBLEM]: 2.4.18-rc1 - Unable to mount CD-ROM/RW
From: Shawn Starr <spstarr@sh0n.net>
To: Linux <linux-kernel@vger.kernel.org>
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
X-Mailer: Evolution/1.0.1.99 (Preview Release)
Date: 21 Feb 2002 12:40:35 -0500
Message-Id: <1014313262.8811.25.camel@unaropia>
Mime-Version: 1.0
Sender: linux-kernel-owner@vger.kernel.org
X-Mailing-List: linux-kernel@vger.kernel.org

Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MPE3064AT, ATA DISK drive
hdb: WDC AC32500H, ATA DISK drive
hdc: YAMAHA CRW2100E, ATAPI CD/DVD-ROM drive      <--------------------
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 12672450 sectors (6488 MB) w/512KiB Cache, CHS=788/255/63, (U)DMA
hdb: Disabling (U)DMA for WDC AC32500H
hdb: 4999680 sectors (2560 MB) w/128KiB Cache, CHS=620/128/63
Partition check:
 hda: hda1 hda2
 hdb: hdb1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:0c.0: 3Com PCI 3c900 Cyclone 10Mbps TPO at 0xe880. Vers LK1.1.16
PPP generic driver version 2.4.1
PPP Deflate Compression module registered
PPP BSD Compression module registered
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
        <Adaptec 2902/04/10/15/20/30C SCSI adapter>
        aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs

  Vendor: HP        Model: T4000s            Rev: 1.10
  Type:   Sequential-Access                  ANSI SCSI revision: 02
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: YAMAHA    Model: CRW2100E          Rev: 1.0N <----------------
  Type:   CD-ROM                             ANSI SCSI revision: 02
st: Version 20020205, bufsize 32768, wrt 30720, max init. bufs 4, s/g
segs 16
Attached scsi tape st0 at scsi0, channel 0, id 4, lun 0

When i attempt to mount /dev/cdrom (symlink to /dev/scd0) I get

mount: /dev/cdrom is not a valid block device (or /dev/scd0).

What broke? :-(

Shawn.



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/