Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753201AbZC2Vh7 (ORCPT ); Sun, 29 Mar 2009 17:37:59 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751246AbZC2Vht (ORCPT ); Sun, 29 Mar 2009 17:37:49 -0400 Received: from monster.nessie.de ([84.200.20.120]:42694 "EHLO monster.nessie.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751119AbZC2Vhq (ORCPT ); Sun, 29 Mar 2009 17:37:46 -0400 Message-ID: <49CFEA24.10700@nessie.de> Date: Sun, 29 Mar 2009 23:37:40 +0200 From: Michael Roth User-Agent: Thunderbird 2.0.0.21 (X11/20090321) MIME-Version: 1.0 To: petkovbb@gmail.com, Michael Roth , linux-kernel@vger.kernel.org, Bartlomiej Zolnierkiewicz Subject: Re: Bug in 2.6.29 ide-cd: Kernel freeze: bisected + unacceptable workaround References: <49CFCB2A.4020505@nessie.de> <20090329201337.GA9962@liondog.tnic> In-Reply-To: <20090329201337.GA9962@liondog.tnic> X-Enigmail-Version: 0.95.7 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 52519 Lines: 1138 Hello Borislav, thank you for your help. Borislav Petkov schrieb: > Can we please see a dmesg of a working > kernel on your machine Sure, dmesg output appended beneath. I also added the dmesg output of the patched kernel. See below. > and also is it possible to catch any kernel output of the crash > any oops or something when your machine freezes - the more the better. There aren't any messages, neither on the console nor in the syslog. The kernel simple freeze, cursor on the console stops blinking, no more ide activity. I have to hit the reset-bottom to restart. > Probably over a serial console would be best but photographed > with a digicam and uploaded somewhere as a screenshot would do too. I will do that on request, but it will take some time (about days) because currently I don't have access to a second computer or so. > You could also try the following patch to see whether that is of any > help: Your patch helps perfectly. I'm writing this email on the patched 2.6.29. I also tested CD and DVD access: They work well. Burning not tested but I assume it will work too. Ok, here the dmesg of the original 2.6.29 with deactivated idecd: Linux version 2.6.29 (root@nautilus) (gcc version 4.3.3 (Gentoo 4.3.3-r1) ) #6 PREEMPT Sun Mar 29 20:11:02 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) DMI 2.2 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. last_pfn = 0x3fff0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 377fe000 @ 10000-15000 RAMDISK: 37e7d000 - 37fef7fa Allocated new RAMDISK: 005d8000 - 0074a7fa Move RAMDISK from 0000000037e7d000 - 0000000037fef7f9 to 005d8000 - 0074a7f9 ACPI: RSDP 000F6F30, 0014 (r0 VKT333) ACPI: RSDT 3FFF3000, 002C (r1 VKT333 AWRDACPI 42302E31 AWRD 0) ACPI: FACP 3FFF3040, 0074 (r1 VKT333 AWRDACPI 42302E31 AWRD 0) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 3FFF30C0, 3E82 (r1 VKT333 AWRDACPI 1000 MSFT 100000D) ACPI: FACS 3FFF0000, 0040 ACPI: APIC 3FFF6F80, 0054 (r1 VKT333 AWRDACPI 42302E31 AWRD 0) ACPI: Local APIC address 0xfee00000 135MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00011000 - 00017f00 (7 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000100000 - 00005d4f2c] TEXT DATA BSS ==> [0000100000 - 00005d4f2c] #2 [00005d5000 - 00005d8000] INIT_PG_TABLE ==> [00005d5000 - 00005d8000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] #5 [00005d8000 - 000074a7fa] NEW RAMDISK ==> [00005d8000 - 000074a7fa] #6 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0003fff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0003fff0 On node 0 totalpages: 262015 free_area_init_node: node 0, pgdat c052f380, node_mem_map c1000200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 272 pages used for memmap HighMem zone: 34530 pages, LIFO batch:7 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information nr_irqs_gsi: 24 Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967 Kernel command line: crypt_root=/dev/vg1/root.crypt dolvm lvmraid=/dev/md3 video=radeonfb Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 1994.344 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032240k/1048512k available (3184k kernel code, 15444k reserved, 1134k data, 324k init, 139208k highmem) virtual kernel memory layout: fixmap : 0xfffac000 - 0xfffff000 ( 332 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc053a000 - 0xc058b000 ( 324 kB) .data : 0xc041c29f - 0xc0537d40 (1134 kB) .text : 0xc0100000 - 0xc041c29f (3184 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Calibrating delay loop (skipped), value calculated using timer frequency.. 3988.68 BogoMIPS (lpj=1994344) Mount-cache hash table entries: 512 CPU: CLK_CTL MSR was 60031223. Reprogramming to 20031223 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 2400+ stepping 01 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20081204 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 net_namespace: 932 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] pci 0000:00:01.0: supports D1 pci 0000:00:09.0: reg 10 32bit mmio: [0xe8100000-0xe811ffff] pci 0000:00:09.0: reg 14 32bit mmio: [0xe8120000-0xe813ffff] pci 0000:00:09.0: reg 18 io port: [0xa000-0xa03f] pci 0000:00:09.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:0a.0: reg 10 io port: [0xa400-0xa407] pci 0000:00:0a.0: reg 14 io port: [0xa800-0xa803] pci 0000:00:0a.0: reg 18 io port: [0xac00-0xac07] pci 0000:00:0a.0: reg 1c io port: [0xb000-0xb003] pci 0000:00:0a.0: reg 20 io port: [0xb400-0xb40f] pci 0000:00:0a.0: reg 24 32bit mmio: [0xe8160000-0xe8163fff] pci 0000:00:0a.0: reg 30 32bit mmio: [0x000000-0x003fff] pci 0000:00:0a.0: supports D1 pci 0000:00:10.0: reg 20 io port: [0xb800-0xb81f] pci 0000:00:10.0: supports D1 D2 pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:10.1: reg 20 io port: [0xbc00-0xbc1f] pci 0000:00:10.1: supports D1 D2 pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:10.2: reg 20 io port: [0xc000-0xc01f] pci 0000:00:10.2: supports D1 D2 pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.2: PME# disabled pci 0000:00:10.3: reg 10 32bit mmio: [0xe8164000-0xe81640ff] pci 0000:00:10.3: supports D1 D2 pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.3: PME# disabled HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB pci 0000:00:11.1: reg 20 io port: [0xc400-0xc40f] pci 0000:00:11.5: reg 10 io port: [0xc800-0xc8ff] pci 0000:00:11.5: supports D1 D2 pci 0000:00:12.0: reg 10 io port: [0xcc00-0xccff] pci 0000:00:12.0: reg 14 32bit mmio: [0xe8165000-0xe81650ff] pci 0000:00:12.0: supports D1 D2 pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:12.0: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] pci 0000:01:00.0: reg 14 io port: [0x9000-0x90ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xe8020000-0xe802ffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] pci 0000:01:00.1: reg 14 32bit mmio: [0xe8030000-0xe803ffff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] pci 0000:00:01.0: bridge 32bit mmio: [0xe8000000-0xe80fffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xe7ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0 ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0 ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0 ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0xd0000-0xd3fff has been reserved system 00:00: iomem range 0xd9800-0xdbfff has been reserved system 00:00: iomem range 0xf0000-0xfbfff could not be reserved system 00:00: iomem range 0xfc000-0xfffff could not be reserved system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved system 00:00: iomem range 0xffff0000-0xffffffff has been reserved system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x805 has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x9000-0x9fff pci 0000:00:01.0: MEM window: 0xe8000000-0xe80fffff pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000e7ffffff pci 0000:00:01.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] pci_bus 0000:01: resource 1 mem: [0xe8000000-0xe80fffff] pci_bus 0000:01: resource 2 mem: [0xd8000000-0xe7ffffff] pci_bus 0000:01: resource 3 mem: [0x0-0x0] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 1481k freed Machine check exception polling timer started. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1747 alg: No test for cipher_null (cipher_null-generic) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for fcrypt (fcrypt-generic) alg: No test for stdrng (krng) alg: No test for stdrng (ansi_cprng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered PCI: VIA PCI bridge detected. Disabling DAC. pci 0000:01:00.0: Boot video device radeonfb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=240.00 Mhz, System=166.00 MHz radeonfb: PLL min 20000 max 40000 i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-2: unable to read EDID block. Switched to high resolution mode on CPU 0 i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-3: unable to read EDID block. i2c-adapter i2c-3: unable to read EDID block. i2c-adapter i2c-3: unable to read EDID block. radeonfb: Monitor 1 type DFP found radeonfb: EDID probed radeonfb: Monitor 2 type no found Console: switching to colour frame buffer device 160x64 radeonfb (0000:01:00.0): ATI Radeon 5960 "Y`" vga16fb: initializing vga16fb: mapped to 0xc00a0000 fb1: VGA16 VGA frame buffer device input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (on) ACPI: CPU0 (power states: C1[C1] C2[C2]) processor ACPI_CPU:00: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) Linux agpgart interface v0.103 agpgart: Detected VIA KT266/KY266x/KT333 chipset agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.29.0 20080528 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded Uniform Multi-Platform E-IDE driver pdc202xx_new 0000:00:0a.0: IDE controller (0x105a:0x4d69 rev 0x02) Promise_IDE 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pdc202xx_new 0000:00:0a.0: PLL input clock is 16623 kHz pdc202xx_new 0000:00:0a.0: 100% native mode on irq 18 ide2: BM-DMA at 0xb400-0xb407 ide3: BM-DMA at 0xb408-0xb40f Probing IDE interface ide2... hde: HL-DT-ST DVDRAM GSA-H42N, ATAPI CD/DVD-ROM drive hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hde: UDMA/66 mode selected Probing IDE interface ide3... ide2 at 0xa400-0xa407,0xa802 on irq 18 ide3 at 0xac00-0xac07,0xb002 on irq 18 via82cxxx 0000:00:11.1: VIA vt8235 (rev 00) IDE UDMA133 via82cxxx 0000:00:11.1: IDE controller (0x1106:0x0571 rev 0x06) ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 VIA_IDE 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 via82cxxx 0000:00:11.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xc400-0xc407 ide1: BM-DMA at 0xc408-0xc40f Probing IDE interface ide0... hda: SAMSUNG HD400LD, ATA DISK drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Probing IDE interface ide1... hdc: SAMSUNG HD400LD, ATA DISK drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/100 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 hda: max request size: 512KiB hda: 781422768 sectors (400088 MB) w/8192KiB Cache, CHS=48641/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdc: max request size: 512KiB hdc: 781422768 sectors (400088 MB) w/8192KiB Cache, CHS=48641/255/63 hdc: cache flushes supported hdc: hdc1 hdc2 hdc3 hdc4 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 ehci_hcd 0000:00:10.3: PCI INT D -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.3: irq 21, io mem 0xe8164000 ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.29 ehci_hcd usb usb1: SerialNumber: 0000:00:10.3 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b800 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.29 uhci_hcd usb usb2: SerialNumber: 0000:00:10.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000bc00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.29 uhci_hcd usb usb3: SerialNumber: 0000:00:10.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.29 uhci_hcd usb usb4: SerialNumber: 0000:00:10.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input3 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 324k freed Marking TSC unstable due to TSC halts in idle usb 1-4: new high speed USB device using ehci_hcd and address 4 usb 1-4: New USB device found, idVendor=0dda, idProduct=2005 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: USB2.0 Card Reader usb 1-4: Manufacturer: ICSI usb 1-4: SerialNumber: 0000001 usb 1-4: configuration #1 chosen from 1 choice usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: New USB device found, idVendor=046a, idProduct=0004 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: configuration #1 chosen from 1 choice input: HID 046a:0004 as /class/input/input4 generic-usb 0003:046A:0004.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 046a:0004] on usb-0000:00:10.0-1/input0 input: HID 046a:0004 as /class/input/input5 generic-usb 0003:046A:0004.0002: input,hidraw1: USB HID v1.10 Device [HID 046a:0004] on usb-0000:00:10.0-1/input1 usb 2-2: new low speed USB device using uhci_hcd and address 3 usb 2-2: New USB device found, idVendor=046d, idProduct=c024 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: USB-PS/2 Optical Mouse usb 2-2: Manufacturer: B16_b_02 usb 2-2: configuration #1 chosen from 1 choice input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input6 generic-usb 0003:046D:C024.0003: input,hidraw2: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:10.0-2/input0 md: Autodetecting RAID arrays. md: Scanned 4 and added 4 devices. md: autorun ... md: considering hdc3 ... md: adding hdc3 ... md: hdc2 has different UUID to hdc3 md: adding hda3 ... md: hda2 has different UUID to hdc3 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering hdc2 ... md: adding hdc2 ... md: adding hda2 ... md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md: ... autorun DONE. md2: unknown partition table md3: unknown partition table kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 e1000 0000:00:09.0: PCI: Disallowing DAC for device via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker via-rhine: Broken BIOS detected, avoid_D3 enabled. IT8705 SuperIO detected. parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 e1000: 0000:00:09.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:17:35:86 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23 ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23 eth1: VIA Rhine II at 0xe8165000, 00:0a:e6:62:b1:b3, IRQ 23. eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 EXT3 FS on dm-3, internal journal scsi 0:0:0:0: Direct-Access ICSI IC1210 CF 1.6B PQ: 0 ANSI: 0 CCS scsi 0:0:0:1: Direct-Access ICSI IC1210 MS 1.6B PQ: 0 ANSI: 0 CCS scsi 0:0:0:2: Direct-Access ICSI IC1210 MMC/SD 1.6B PQ: 0 ANSI: 0 CCS scsi 0:0:0:3: Direct-Access ICSI IC1210 SM 1.6B PQ: 0 ANSI: 0 CCS usb-storage: device scan complete Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] Attached SCSI removable disk sd 0:0:0:1: [sdb] Attached SCSI removable disk sd 0:0:0:2: [sdc] Attached SCSI removable disk sd 0:0:0:3: [sdd] Attached SCSI removable disk sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:1: Attached scsi generic sg1 type 0 sd 0:0:0:2: Attached scsi generic sg2 type 0 sd 0:0:0:3: Attached scsi generic sg3 type 0 kjournald starting. Commit interval 5 seconds EXT3 FS on md2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.11) Adding 524280k swap on /dev/mapper/swap. Priority:-1 extents:1 across:524280k hda: UDMA/100 mode selected hda: cache flushes supported hdc: UDMA/100 mode selected hdc: cache flushes supported e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX eth1: link down Bridge firewalling registered device eth0 entered promiscuous mode device eth1 entered promiscuous mode br0: topology change detected, propagating br0: port 1(eth0) entering forwarding state NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth1: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period warning: `squid' uses 32-bit capabilities (legacy support in use) br0: no IPv6 routers present eth0: no IPv6 routers present agpgart-via 0000:00:00.0: AGP 2.0 bridge agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode radeonfb 0000:01:00.0: putting AGP V2 device into 4x mode [drm] Setting GART location based on new memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 1 usecs agpgart-via 0000:00:00.0: AGP 2.0 bridge agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode radeonfb 0000:01:00.0: putting AGP V2 device into 4x mode [drm] Loading R200 Microcode loop: module loaded And this is the dmesg output of the patched (localversion misleading) 2.6.29: Linux version 2.6.29bisect (root@nautilus) (gcc version 4.3.3 (Gentoo 4.3.3-r1) ) #16 PREEMPT Sun Mar 29 22:47:23 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) DMI 2.2 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. last_pfn = 0x3fff0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 377fe000 @ 10000-15000 RAMDISK: 37e7d000 - 37fef7fc Allocated new RAMDISK: 005fc000 - 0076e7fc Move RAMDISK from 0000000037e7d000 - 0000000037fef7fb to 005fc000 - 0076e7fb ACPI: RSDP 000F6F30, 0014 (r0 VKT333) ACPI: RSDT 3FFF3000, 002C (r1 VKT333 AWRDACPI 42302E31 AWRD 0) ACPI: FACP 3FFF3040, 0074 (r1 VKT333 AWRDACPI 42302E31 AWRD 0) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 3FFF30C0, 3E82 (r1 VKT333 AWRDACPI 1000 MSFT 100000D) ACPI: FACS 3FFF0000, 0040 ACPI: APIC 3FFF6F80, 0054 (r1 VKT333 AWRDACPI 42302E31 AWRD 0) ACPI: Local APIC address 0xfee00000 135MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00011000 - 00017f00 (7 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000100000 - 00005f89ac] TEXT DATA BSS ==> [0000100000 - 00005f89ac] #2 [00005f9000 - 00005fc000] INIT_PG_TABLE ==> [00005f9000 - 00005fc000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] #5 [00005fc000 - 000076e7fc] NEW RAMDISK ==> [00005fc000 - 000076e7fc] #6 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0003fff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0003fff0 On node 0 totalpages: 262015 free_area_init_node: node 0, pgdat c0550c40, node_mem_map c1000200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 272 pages used for memmap HighMem zone: 34530 pages, LIFO batch:7 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information nr_irqs_gsi: 24 Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967 Kernel command line: crypt_root=/dev/vg1/root.crypt dolvm lvmraid=/dev/md3 video=radeonfb Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 1994.519 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032096k/1048512k available (3289k kernel code, 15588k reserved, 1165k data, 328k init, 139208k highmem) virtual kernel memory layout: fixmap : 0xfffac000 - 0xfffff000 ( 332 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc055c000 - 0xc05ae000 ( 328 kB) .data : 0xc04367d7 - 0xc0559d40 (1165 kB) .text : 0xc0100000 - 0xc04367d7 (3289 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.03 BogoMIPS (lpj=1994519) Mount-cache hash table entries: 512 CPU: CLK_CTL MSR was 60031223. Reprogramming to 20031223 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 2400+ stepping 01 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20081204 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 net_namespace: 932 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] pci 0000:00:01.0: supports D1 pci 0000:00:09.0: reg 10 32bit mmio: [0xe8100000-0xe811ffff] pci 0000:00:09.0: reg 14 32bit mmio: [0xe8120000-0xe813ffff] pci 0000:00:09.0: reg 18 io port: [0xa000-0xa03f] pci 0000:00:09.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:0a.0: reg 10 io port: [0xa400-0xa407] pci 0000:00:0a.0: reg 14 io port: [0xa800-0xa803] pci 0000:00:0a.0: reg 18 io port: [0xac00-0xac07] pci 0000:00:0a.0: reg 1c io port: [0xb000-0xb003] pci 0000:00:0a.0: reg 20 io port: [0xb400-0xb40f] pci 0000:00:0a.0: reg 24 32bit mmio: [0xe8160000-0xe8163fff] pci 0000:00:0a.0: reg 30 32bit mmio: [0x000000-0x003fff] pci 0000:00:0a.0: supports D1 pci 0000:00:10.0: reg 20 io port: [0xb800-0xb81f] pci 0000:00:10.0: supports D1 D2 pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:10.1: reg 20 io port: [0xbc00-0xbc1f] pci 0000:00:10.1: supports D1 D2 pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:10.2: reg 20 io port: [0xc000-0xc01f] pci 0000:00:10.2: supports D1 D2 pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.2: PME# disabled pci 0000:00:10.3: reg 10 32bit mmio: [0xe8164000-0xe81640ff] pci 0000:00:10.3: supports D1 D2 pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.3: PME# disabled HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB pci 0000:00:11.1: reg 20 io port: [0xc400-0xc40f] pci 0000:00:11.5: reg 10 io port: [0xc800-0xc8ff] pci 0000:00:11.5: supports D1 D2 pci 0000:00:12.0: reg 10 io port: [0xcc00-0xccff] pci 0000:00:12.0: reg 14 32bit mmio: [0xe8165000-0xe81650ff] pci 0000:00:12.0: supports D1 D2 pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:12.0: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] pci 0000:01:00.0: reg 14 io port: [0x9000-0x90ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xe8020000-0xe802ffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] pci 0000:01:00.1: reg 14 32bit mmio: [0xe8030000-0xe803ffff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] pci 0000:00:01.0: bridge 32bit mmio: [0xe8000000-0xe80fffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xe7ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0 ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0 ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0 ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0xd0000-0xd3fff has been reserved system 00:00: iomem range 0xd9800-0xdbfff has been reserved system 00:00: iomem range 0xf0000-0xfbfff could not be reserved system 00:00: iomem range 0xfc000-0xfffff could not be reserved system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved system 00:00: iomem range 0xffff0000-0xffffffff has been reserved system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x805 has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x9000-0x9fff pci 0000:00:01.0: MEM window: 0xe8000000-0xe80fffff pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000e7ffffff pci 0000:00:01.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] pci_bus 0000:01: resource 1 mem: [0xe8000000-0xe80fffff] pci_bus 0000:01: resource 2 mem: [0xd8000000-0xe7ffffff] pci_bus 0000:01: resource 3 mem: [0x0-0x0] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 1481k freed Machine check exception polling timer started. audit: initializing netlink socket (disabled) type=2000 audit(1238368509.235:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1747 alg: No test for cipher_null (cipher_null-generic) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for fcrypt (fcrypt-generic) alg: No test for stdrng (krng) alg: No test for stdrng (ansi_cprng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered PCI: VIA PCI bridge detected. Disabling DAC. pci 0000:01:00.0: Boot video device radeonfb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=240.00 Mhz, System=166.00 MHz radeonfb: PLL min 20000 max 40000 i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-3: unable to read EDID block. i2c-adapter i2c-3: unable to read EDID block. i2c-adapter i2c-3: unable to read EDID block. radeonfb: Monitor 1 type DFP found radeonfb: EDID probed radeonfb: Monitor 2 type no found Console: switching to colour frame buffer device 160x64 radeonfb (0000:01:00.0): ATI Radeon 5960 "Y`" vga16fb: initializing vga16fb: mapped to 0xc00a0000 fb1: VGA16 VGA frame buffer device input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (on) ACPI: CPU0 (power states: C1[C1] C2[C2]) processor ACPI_CPU:00: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) Linux agpgart interface v0.103 agpgart: Detected VIA KT266/KY266x/KT333 chipset agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.29.0 20080528 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded Uniform Multi-Platform E-IDE driver pdc202xx_new 0000:00:0a.0: IDE controller (0x105a:0x4d69 rev 0x02) Promise_IDE 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pdc202xx_new 0000:00:0a.0: PLL input clock is 16608 kHz pdc202xx_new 0000:00:0a.0: 100% native mode on irq 18 ide2: BM-DMA at 0xb400-0xb407 ide3: BM-DMA at 0xb408-0xb40f Probing IDE interface ide2... hde: HL-DT-ST DVDRAM GSA-H42N, ATAPI CD/DVD-ROM drive hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hde: UDMA/66 mode selected Probing IDE interface ide3... ide2 at 0xa400-0xa407,0xa802 on irq 18 ide3 at 0xac00-0xac07,0xb002 on irq 18 via82cxxx 0000:00:11.1: VIA vt8235 (rev 00) IDE UDMA133 via82cxxx 0000:00:11.1: IDE controller (0x1106:0x0571 rev 0x06) ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 VIA_IDE 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 via82cxxx 0000:00:11.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xc400-0xc407 ide1: BM-DMA at 0xc408-0xc40f Probing IDE interface ide0... hda: SAMSUNG HD400LD, ATA DISK drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Probing IDE interface ide1... hdc: SAMSUNG HD400LD, ATA DISK drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/100 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 hda: max request size: 512KiB hda: 781422768 sectors (400088 MB) w/8192KiB Cache, CHS=48641/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdc: max request size: 512KiB hdc: 781422768 sectors (400088 MB) w/8192KiB Cache, CHS=48641/255/63 hdc: cache flushes supported hdc: hdc1 hdc2 hdc3 hdc4 ide-cd driver 5.00 ide-cd: hde: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 ehci_hcd 0000:00:10.3: PCI INT D -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.3: irq 21, io mem 0xe8164000 ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.29bisect ehci_hcd usb usb1: SerialNumber: 0000:00:10.3 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b800 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.29bisect uhci_hcd usb usb2: SerialNumber: 0000:00:10.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000bc00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.29bisect uhci_hcd usb usb3: SerialNumber: 0000:00:10.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.29bisect uhci_hcd usb usb4: SerialNumber: 0000:00:10.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input3 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 328k freed Marking TSC unstable due to TSC halts in idle usb 1-4: new high speed USB device using ehci_hcd and address 4 usb 1-4: New USB device found, idVendor=0dda, idProduct=2005 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: USB2.0 Card Reader usb 1-4: Manufacturer: ICSI usb 1-4: SerialNumber: 0000001 usb 1-4: configuration #1 chosen from 1 choice usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: New USB device found, idVendor=046a, idProduct=0004 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: configuration #1 chosen from 1 choice input: HID 046a:0004 as /class/input/input4 generic-usb 0003:046A:0004.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 046a:0004] on usb-0000:00:10.0-1/input0 input: HID 046a:0004 as /class/input/input5 generic-usb 0003:046A:0004.0002: input,hidraw1: USB HID v1.10 Device [HID 046a:0004] on usb-0000:00:10.0-1/input1 usb 2-2: new low speed USB device using uhci_hcd and address 3 md: Autodetecting RAID arrays. usb 2-2: New USB device found, idVendor=046d, idProduct=c024 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: USB-PS/2 Optical Mouse usb 2-2: Manufacturer: B16_b_02 usb 2-2: configuration #1 chosen from 1 choice input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input6 generic-usb 0003:046D:C024.0003: input,hidraw2: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:10.0-2/input0 md: Scanned 4 and added 4 devices. md: autorun ... md: considering hdc3 ... md: adding hdc3 ... md: hdc2 has different UUID to hdc3 md: adding hda3 ... md: hda2 has different UUID to hdc3 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering hdc2 ... md: adding hdc2 ... md: adding hda2 ... md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md: ... autorun DONE. md2: unknown partition table md3: unknown partition table EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker via-rhine: Broken BIOS detected, avoid_D3 enabled. ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23 ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23 eth0: VIA Rhine II at 0xe8165000, 00:0a:e6:62:b1:b3, IRQ 23. eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 e1000 0000:00:09.0: PCI: Disallowing DAC for device IT8705 SuperIO detected. parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 udev: renamed network interface eth0 to eth1 Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning e1000: 0000:00:09.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:17:35:86 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 EXT3 FS on dm-3, internal journal scsi 0:0:0:0: Direct-Access ICSI IC1210 CF 1.6B PQ: 0 ANSI: 0 CCS scsi 0:0:0:1: Direct-Access ICSI IC1210 MS 1.6B PQ: 0 ANSI: 0 CCS scsi 0:0:0:2: Direct-Access ICSI IC1210 MMC/SD 1.6B PQ: 0 ANSI: 0 CCS scsi 0:0:0:3: Direct-Access ICSI IC1210 SM 1.6B PQ: 0 ANSI: 0 CCS usb-storage: device scan complete Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] Attached SCSI removable disk sd 0:0:0:1: [sdb] Attached SCSI removable disk sd 0:0:0:2: [sdc] Attached SCSI removable disk sd 0:0:0:3: [sdd] Attached SCSI removable disk sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:1: Attached scsi generic sg1 type 0 sd 0:0:0:2: Attached scsi generic sg2 type 0 sd 0:0:0:3: Attached scsi generic sg3 type 0 kjournald starting. Commit interval 5 seconds EXT3 FS on md2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.11) Adding 524280k swap on /dev/mapper/swap. Priority:-1 extents:1 across:524280k hda: UDMA/100 mode selected hda: cache flushes supported hdc: UDMA/100 mode selected hdc: cache flushes supported hde: UDMA/66 mode selected e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX eth1: link down Bridge firewalling registered device eth0 entered promiscuous mode device eth1 entered promiscuous mode br0: topology change detected, propagating br0: port 1(eth0) entering forwarding state NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth1: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period warning: `squid' uses 32-bit capabilities (legacy support in use) br0: no IPv6 routers present eth0: no IPv6 routers present agpgart-via 0000:00:00.0: AGP 2.0 bridge agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode radeonfb 0000:01:00.0: putting AGP V2 device into 4x mode [drm] Setting GART location based on new memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 1 usecs agpgart-via 0000:00:00.0: AGP 2.0 bridge agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode radeonfb 0000:01:00.0: putting AGP V2 device into 4x mode [drm] Loading R200 Microcode ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/