Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757160AbZC3Cyw (ORCPT ); Sun, 29 Mar 2009 22:54:52 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1756511AbZC3Cyn (ORCPT ); Sun, 29 Mar 2009 22:54:43 -0400 Received: from wf-out-1314.google.com ([209.85.200.172]:51150 "EHLO wf-out-1314.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754595AbZC3Cyk convert rfc822-to-8bit (ORCPT ); Sun, 29 Mar 2009 22:54:40 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; b=eDhrzte0vcTpvwADgsmUzDA7ZOKKeBdZf3kGnlcyeYWdntXd+lnAS/2Rf1DJJHP62D lo72b8OPWeXi4sSCjCXCJCqUx/RMT5zA60XtrKN4s1tUj1vb1twyHI3O6G8FsFhCU47z VTgxyWkhFfoQZyxOjdEI6c/GJMwyCxshccF+0= MIME-Version: 1.0 In-Reply-To: <000301c9b0e1$af531e40$0df95ac0$@com> References: <9b1675090903291904g7eca965eydb1aa3f852a1b91c@mail.gmail.com> <000301c9b0e1$af531e40$0df95ac0$@com> Date: Sun, 29 Mar 2009 20:54:38 -0600 Message-ID: <9b1675090903291954j26e2380fy74338490343eaa2@mail.gmail.com> Subject: Re: 2.6.29 on MacBook 2,1 fails to reboot From: Trenton Adams To: "Morten P.D. Stevens" Cc: Linux Kernel Mailing List Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 31699 Lines: 666 Oops, gmail doesn't reply to all by default. On Sun, Mar 29, 2009 at 8:46 PM, Morten P.D. Stevens wrote: > Hi, > >> System information below. ?If you need more info, let me know. > > Please post your dmesg output. tdamac linux # dmesg Linux version 2.6.29 (root@tdamac) (gcc version 4.1.2 (Gentoo 4.1.2 p1.3)) #3 SMP Sun Mar 29 19:07:55 MDT 2009 Command line: root=/dev/ram0 init=/linuxrc real_root=/dev/s/sys dolvm KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007e08c000 (usable) BIOS-e820: 000000007e08c000 - 000000007e28d000 (ACPI NVS) BIOS-e820: 000000007e28d000 - 000000007eebe000 (ACPI data) BIOS-e820: 000000007eebe000 - 000000007eeef000 (ACPI NVS) BIOS-e820: 000000007eeef000 - 000000007ef00000 (ACPI data) BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x7e08c max_arch_pfn = 0x100000000 init_memory_mapping: 0000000000000000-000000007e08c000 0000000000 - 007e000000 page 2M 007e000000 - 007e08c000 page 4k kernel direct mapping tables up to 7e08c000 @ 8000-c000 last_map_addr: 7e08c000 end: 7e08c000 RAMDISK: 37edf000 - 37fef088 ACPI: RSDP 000FE020, 0024 (r2 APPLE ) ACPI: XSDT 7EEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013) ACPI: FACP 7EEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 7EEF0000, 41E4 (r1 APPLE MacBook 20001 INTL 20050309) ACPI: FACS 7EEC0000, 0040 ACPI: HPET 7EEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F) ACPI: APIC 7EEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F) ACPI: MCFG 7EEF8000, 003C (r1 APPLE Apple00 1 Loki 5F) ACPI: ASF! 7EEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F) ACPI: SBST 7EEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F) ACPI: ECDT 7EEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F) ACPI: SSDT 7EEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309) ACPI: SSDT 7EEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309) ACPI: SSDT 7EEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309) ACPI: Local APIC address 0xfee00000 (6 early reservations) ==> bootmem [0000000000 - 007e08c000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000a43b8c] TEXT DATA BSS ==> [0000200000 - 0000a43b8c] #3 [0037edf000 - 0037fef088] RAMDISK ==> [0037edf000 - 0037fef088] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007e08c On node 0 totalpages: 516139 DMA zone: 56 pages used for memmap DMA zone: 2216 pages reserved DMA zone: 1727 pages, LIFO batch:0 DMA32 zone: 7002 pages used for memmap DMA32 zone: 505138 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Allocating 53248 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 506865 Kernel command line: root=/dev/ram0 init=/linuxrc real_root=/dev/s/sys dolvm Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using PMTIMER reference calibration Detected 2161.212 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Memory: 2022216k/2064944k available (4392k kernel code, 388k absent, 41684k reserved, 2619k data, 372k init) SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.42 BogoMIPS (lpj=8644848) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K [ds] using Core 2/Atom configuration CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20081204 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4322.44 BogoMIPS (lpj=8644898) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K [ds] using Core 2/Atom configuration CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (8644.87 BogoMIPS). net_namespace: 1784 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 PCI: MCFG area at f0000000 reserved in E820 PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: Using MMCONFIG at f0000000 - f3ffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0x90380000-0x903fffff] pci 0000:00:02.0: reg 14 io port: [0x20e0-0x20e7] pci 0000:00:02.0: reg 18 32bit mmio: [0x80000000-0x8fffffff] pci 0000:00:02.0: reg 1c 32bit mmio: [0x90400000-0x9043ffff] pci 0000:00:02.1: reg 10 32bit mmio: [0x90300000-0x9037ffff] pci 0000:00:07.0: reg 10 32bit mmio: [0x90444000-0x90444fff] pci 0000:00:1b.0: reg 10 64bit mmio: [0x90440000-0x90443fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x2080-0x209f] pci 0000:00:1d.1: reg 20 io port: [0x2060-0x207f] pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f] pci 0000:00:1d.3: reg 20 io port: [0x2020-0x203f] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90445400-0x904457ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f) pci 0000:00:1f.1: reg 10 io port: [0x20d8-0x20df] pci 0000:00:1f.1: reg 14 io port: [0x20f4-0x20f7] pci 0000:00:1f.1: reg 18 io port: [0x20d0-0x20d7] pci 0000:00:1f.1: reg 1c io port: [0x20f0-0x20f3] pci 0000:00:1f.1: reg 20 io port: [0x20b0-0x20bf] pci 0000:00:1f.2: reg 10 io port: [0x20c8-0x20cf] pci 0000:00:1f.2: reg 14 io port: [0x20ec-0x20ef] pci 0000:00:1f.2: reg 18 io port: [0x20c0-0x20c7] pci 0000:00:1f.2: reg 1c io port: [0x20e8-0x20eb] pci 0000:00:1f.2: reg 20 io port: [0x20a0-0x20af] pci 0000:00:1f.2: reg 24 32bit mmio: [0x90445000-0x904453ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf] pci 0000:01:00.0: reg 10 64bit mmio: [0x90200000-0x90203fff] pci 0000:01:00.0: reg 18 io port: [0x1000-0x10ff] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:00:1c.0: bridge io port: [0x1000-0x1fff] pci 0000:00:1c.0: bridge 32bit mmio: [0x90200000-0x902fffff] pci 0000:02:00.0: reg 10 64bit mmio: [0x90100000-0x9010ffff] pci 0000:02:00.0: supports D1 pci 0000:02:00.0: PME# supported from D0 D1 D3hot pci 0000:02:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0x90100000-0x901fffff] pci 0000:03:03.0: reg 10 32bit mmio: [0x90000000-0x90000fff] pci 0000:03:03.0: supports D1 D2 pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:03:03.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x900fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:07: io resource (0x1640-0x164f) overlaps 0000:00:1c.0 BAR 7 (0x1000-0x1fff), disabling pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved system 00:07: ioport range 0x680-0x6ef has been reserved system 00:07: ioport range 0x800-0x80f has been reserved system 00:07: ioport range 0x810-0x817 has been reserved system 00:07: ioport range 0x400-0x47f has been reserved system 00:07: ioport range 0x500-0x53f has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: 0x1000-0x1fff pci 0000:00:1c.0: MEM window: 0x90200000-0x902fffff pci 0000:00:1c.0: PREFETCH window: 0x00000090500000-0x000000905fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0x90100000-0x901fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0x90000000-0x900fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: power state changed by ACPI to D0 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x1000-0x1fff] pci_bus 0000:01: resource 1 mem: [0x90200000-0x902fffff] pci_bus 0000:01: resource 2 mem: [0x90500000-0x905fffff] pci_bus 0000:01: resource 3 mem: [0x0-0x0] pci_bus 0000:02: resource 0 mem: [0x0-0x0] pci_bus 0000:02: resource 1 mem: [0x90100000-0x901fffff] pci_bus 0000:02: resource 2 mem: [0x0-0x0] pci_bus 0000:02: resource 3 mem: [0x0-0x0] pci_bus 0000:03: resource 0 mem: [0x0-0x0] pci_bus 0000:03: resource 1 mem: [0x90000000-0x900fffff] pci_bus 0000:03: resource 2 mem: [0x0-0x0] pci_bus 0000:03: resource 3 io: [0x00-0xffff] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 1088k freed Microcode Update Driver: v2.00 , Peter Oruba HugeTLB registered 2 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 3953 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device ACPI: AC Adapter [ADP1] (on-line) Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID0] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input3 ACPI: Sleep Button (CM) [SLPB] ACPI: SSDT 7EEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309) ACPI: SSDT 7EEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7EEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309) ACPI: SSDT 7EEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) Real Time Clock Driver v1.12b intel_rng: FWH not detected Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected 16124K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets intelfb: Version 0.9.6 intelfb 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 intelfb: 00:02.0: Intel(R) 945GM, aperture size 256MB, stolen memory 16124kB intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching. intelfb: Video mode must be programmed at boot time. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled floppy0: no floppy controllers found brd: module loaded loop: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI e100: Copyright(c) 1999-2006 Intel Corporation sky2 driver version 1.22 sky2 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sky2 0000:01:00.0: setting latency timer to 64 sky2 0000:01:00.0: Yukon-2 EC chip revision 2 sky2 0000:01:00.0: Marvell Yukon 88E8053 Gigabit Ethernet Controller Part Number: Yukon 88E8053 Engineering Level: Rev. 2.2 Manufacturer: Marvell sky2 0000:01:00.0: irq 24 for MSI/MSI-X sky2 eth0: addr 00:19:e3:43:1c:a3 console [netcon0] enabled netconsole: network logging started Linux video capture interface: v2.00 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02) pci 0000:00:1f.1: power state changed by ACPI to D0 pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x20b0-0x20b7 ide1: BM-DMA at 0x20b8-0x20bf Probing IDE interface ide0... hda: HL-DT-ST DVDRW GSA-S10N, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 3ware Storage Controller device driver for Linux v1.26.02.002. Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma 0x20a0 irq 19 ata2: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma 0x20a8 irq 19 ata1.01: ATA-7: ST9160821AS, 3.CAE, max UDMA/133 ata1.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.01: configured for UDMA/133 isa bounce pool size: 16 pages scsi 0:0:1:0: Direct-Access ATA ST9160821AS 3.CA PQ: 0 ANSI: 5 sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:1:0: [sda] Attached SCSI disk sd 0:0:1:0: Attached scsi generic sg0 type 0 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 ohci1394 0000:03:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[90000000-900007ff] Max Packet=[2048] IR/IT contexts=[8/8] ieee1394: raw1394: /dev/raw1394 device initialized ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 21, io mem 0x90445400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu Marking TSC unstable due to TSC halts in idle usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver oprofile: using NMI interrupt. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. xt_time: kernel timezone is -0000 ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. registered taskstats version 1 Freeing unused kernel memory: 372k freed usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb 1-3: new high speed USB device using ehci_hcd and address 4 usb 1-3: configuration #1 chosen from 1 choice hub 1-3:1.0: USB hub found hub 1-3:1.0: 2 ports detected Clocksource tsc unstable (delta = -265511863 ns) usb 1-4: new high speed USB device using ehci_hcd and address 5 usb 1-4: configuration #1 chosen from 1 choice ieee1394: Host added: ID:BUS[0-00:1023] GUID[001cb3fffe8ab416] usb 2-2: new full speed USB device using uhci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input4 apple 0003:05AC:021A.0001: input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0 input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input5 apple 0003:05AC:021A.0002: input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2 usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice generic-usb 0003:05AC:8240.0003: claimed by neither input, hiddev nor hidraw usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice input: HID 05ac:1000 as /class/input/input6 generic-usb 0003:05AC:1000.0004: input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0 input: HID 05ac:1000 as /class/input/input7 generic-usb 0003:05AC:1000.0005: input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1 usb 1-3.1: new high speed USB device using ehci_hcd and address 8 usb 1-3.1: configuration #1 chosen from 1 choice hub 1-3.1:1.0: USB hub found hub 1-3.1:1.0: 4 ports detected usb 1-3.2: new low speed USB device using ehci_hcd and address 9 usb 1-3.2: configuration #1 chosen from 1 choice input: Logitech USB Mouse as /class/input/input8 generic-usb 0003:046D:C00C.0006: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.7-3.2/input0 usb 1-3.1.1: new high speed USB device using ehci_hcd and address 10 usb 1-3.1.1: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 10 usb-storage: waiting for device to settle before scanning usb 1-3.1.3: new high speed USB device using ehci_hcd and address 11 usb 1-3.1.3: configuration #1 chosen from 1 choice hub 1-3.1.3:1.0: USB hub found hub 1-3.1.3:1.0: 3 ports detected usb 1-3.1.4: new high speed USB device using ehci_hcd and address 12 usb 1-3.1.4: configuration #1 chosen from 1 choice scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 12 usb-storage: waiting for device to settle before scanning usb 1-3.1.3.1: new low speed USB device using ehci_hcd and address 13 usb 1-3.1.3.1: configuration #1 chosen from 1 choice input: No brand KVM as /class/input/input9 generic-usb 0003:10D5:5552.0007: input: USB HID v1.10 Keyboard [No brand KVM] on usb-0000:00:1d.7-3.1.3.1/input0 input: No brand KVM as /class/input/input10 generic-usb 0003:10D5:5552.0008: input: USB HID v1.10 Mouse [No brand KVM] on usb-0000:00:1d.7-3.1.3.1/input1 scsi 2:0:0:0: Direct-Access Ext Hard Disk PQ: 0 ANSI: 4 sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00 sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 < sdb5 sdb6 > sd 2:0:0:0: [sdb] Attached SCSI disk sd 2:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. udev: renamed network interface eth0 to eth1 scsi 3:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 sd 3:0:0:0: [sdc] Attached SCSI removable disk sd 3:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete applesmc: Apple MacBook (v2) detected: applesmc: - Model with accelerometer applesmc: - Model without light sensors and backlight applesmc: - Model with 10 temperature sensors applesmc: device has already been initialized (0xe0, 0xf8). applesmc: device successfully initialized. applesmc: 1 fans found. input: applesmc as /class/input/input11 applesmc: driver successfully loaded. input: PC Speaker as /class/input/input12 scsi 4:0:0:0: Direct-Access Maxtor 6 L200R0 BAH4 PQ: 0 ANSI: 0 sd 4:0:0:0: [sdd] 398297087 512-byte hardware sectors: (203 GB/189 GiB) sd 4:0:0:0: [sdd] Write Protect is off sd 4:0:0:0: [sdd] Mode Sense: 03 00 00 00 sd 4:0:0:0: [sdd] Assuming drive cache: write through sd 4:0:0:0: [sdd] 398297087 512-byte hardware sectors: (203 GB/189 GiB) sd 4:0:0:0: [sdd] Write Protect is off sd 4:0:0:0: [sdd] Mode Sense: 03 00 00 00 sd 4:0:0:0: [sdd] Assuming drive cache: write through sdd: sdd1 sd 4:0:0:0: [sdd] Attached SCSI disk sd 4:0:0:0: Attached scsi generic sg3 type 0 usb-storage: device scan complete appletouch: Geyser mode initialized. input: appletouch as /class/input/input13 usbcore: registered new interface driver appletouch HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: STAC922x, Apple subsys_id=106b2200 input: HDA Intel Line In at Ext Left Jack as /class/input/input14 input: HDA Intel Mic at Ext Left Jack as /class/input/input15 input: HDA Intel HP Out at Ext Left Jack as /class/input/input16 EXT3 FS on dm-2, internal journal fuse init (API version 7.11) usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver EXT4-fs: barriers enabled kjournald2 starting: pid 4443, dev dm-0:8, commit interval 5 seconds EXT4 FS on dm-0, internal journal on dm-0:8 EXT4-fs: delayed allocation enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem dm-0 with ordered data mode EXT4-fs: barriers enabled kjournald2 starting: pid 4444, dev dm-4:8, commit interval 5 seconds EXT4 FS on dm-4, internal journal on dm-4:8 EXT4-fs: delayed allocation enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem dm-4 with ordered data mode EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended Adding 1048568k swap on /dev/mapper/s-swap. Priority:-1 extents:1 across:1048568k sky2 eth1: enabling interface ADDRCONF(NETDEV_UP): eth1: link is not ready sky2 eth1: Link is up at 1000 Mbps, full duplex, flow control both ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready eth1: no IPv6 routers present [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20080730 on minor 0 JBD: barrier-based sync failed on dm-0:8 - disabling barriers CE: hpet increasing min_delta_ns to 15000 nsec ACPI: EC: GPE storm detected, transactions will use polling mode -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/