Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751268AbZC3EEI (ORCPT ); Mon, 30 Mar 2009 00:04:08 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750754AbZC3EDy (ORCPT ); Mon, 30 Mar 2009 00:03:54 -0400 Received: from qw-out-2122.google.com ([74.125.92.26]:5417 "EHLO qw-out-2122.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750752AbZC3EDw convert rfc822-to-8bit (ORCPT ); Mon, 30 Mar 2009 00:03:52 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; b=ntZ6IssG/TDQu0qgYWkh+JVugiu3YKlRQAVpQyYx2wCDHsA6AJssQBNIvLdd2SkWY5 bk7PQSHjq698VAOn3RCi0xiDG43A3WRz08aBy6KasCHIxr6/rRZK62bGTZ1qKjJl3IcE 94dHxvzqB86D9mKOPMY8mh2hlC0RNZPE/COXQ= MIME-Version: 1.0 In-Reply-To: <9b1675090903292018g5e1d20f5yfd76286182cb2276@mail.gmail.com> References: <9b1675090903291904g7eca965eydb1aa3f852a1b91c@mail.gmail.com> <000301c9b0e1$af531e40$0df95ac0$@com> <9b1675090903291954j26e2380fy74338490343eaa2@mail.gmail.com> <897274600903292015n44005d12l82b0fafd170d6292@mail.gmail.com> <9b1675090903292018g5e1d20f5yfd76286182cb2276@mail.gmail.com> Date: Sun, 29 Mar 2009 21:03:49 -0700 Message-ID: Subject: Re: 2.6.29 on MacBook 2,1 fails to reboot From: Justin Mattock To: "Trenton D. Adams" Cc: "Morten P.D. Stevens" , Linux Kernel Mailing List Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 35706 Lines: 725 On Sun, Mar 29, 2009 at 8:18 PM, Trenton D. Adams wrote: > I recall it working on 2.6.28, but i didn't have vanilla sources > installed. ?I used 2.6.28 gentoo sources. ?I'm just compiling 2.6.28 > as we speak, as I figured you'd ask. ?I've marked 2.6.29 as bad with > "git bisect". ?I'll let you know when I've narrowed it down for you. > Can't wait to try "git bisect" *big smile*. > > On Sun, Mar 29, 2009 at 9:15 PM, Morten P.D. Stevens > wrote: >> Hi, >> >> at first?view your dmesg should be okay. >> >> does it reboot with 2.6.28 or lower? >> >> Morten >> >> 2009/3/30 Trenton Adams >>> >>> Oops, gmail doesn't reply to all by default. >>> >>> On Sun, Mar 29, 2009 at 8:46 PM, Morten P.D. Stevens >>> wrote: >>> > Hi, >>> > >>> >> System information below. ?If you need more info, let me know. >>> > >>> > Please post your dmesg output. >>> >>> tdamac linux # dmesg >>> Linux version 2.6.29 (root@tdamac) (gcc version 4.1.2 (Gentoo 4.1.2 >>> p1.3)) #3 SMP Sun Mar 29 19:07:55 MDT 2009 >>> Command line: root=/dev/ram0 init=/linuxrc real_root=/dev/s/sys dolvm >>> KERNEL supported cpus: >>> ?Intel GenuineIntel >>> ?AMD AuthenticAMD >>> ?Centaur CentaurHauls >>> BIOS-provided physical RAM map: >>> ?BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) >>> ?BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) >>> ?BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) >>> ?BIOS-e820: 0000000000100000 - 000000007e08c000 (usable) >>> ?BIOS-e820: 000000007e08c000 - 000000007e28d000 (ACPI NVS) >>> ?BIOS-e820: 000000007e28d000 - 000000007eebe000 (ACPI data) >>> ?BIOS-e820: 000000007eebe000 - 000000007eeef000 (ACPI NVS) >>> ?BIOS-e820: 000000007eeef000 - 000000007ef00000 (ACPI data) >>> ?BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved) >>> ?BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) >>> ?BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) >>> ?BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) >>> ?BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) >>> ?BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) >>> ?BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) >>> DMI 2.4 present. >>> last_pfn = 0x7e08c max_arch_pfn = 0x100000000 >>> init_memory_mapping: 0000000000000000-000000007e08c000 >>> ?0000000000 - 007e000000 page 2M >>> ?007e000000 - 007e08c000 page 4k >>> kernel direct mapping tables up to 7e08c000 @ 8000-c000 >>> last_map_addr: 7e08c000 end: 7e08c000 >>> RAMDISK: 37edf000 - 37fef088 >>> ACPI: RSDP 000FE020, 0024 (r2 APPLE ) >>> ACPI: XSDT 7EEFD1C0, 0074 (r1 APPLE ? Apple00 ? ? ? A5 ? ? ? 1000013) >>> ACPI: FACP 7EEFB000, 00F4 (r3 APPLE ? Apple00 ? ? ? A5 Loki ? ? ? 5F) >>> FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) >>> ACPI: DSDT 7EEF0000, 41E4 (r1 APPLE ? MacBook ? ?20001 INTL 20050309) >>> ACPI: FACS 7EEC0000, 0040 >>> ACPI: HPET 7EEFA000, 0038 (r1 APPLE ? Apple00 ? ? ? ?1 Loki ? ? ? 5F) >>> ACPI: APIC 7EEF9000, 0068 (r1 APPLE ? Apple00 ? ? ? ?1 Loki ? ? ? 5F) >>> ACPI: MCFG 7EEF8000, 003C (r1 APPLE ? Apple00 ? ? ? ?1 Loki ? ? ? 5F) >>> ACPI: ASF! 7EEF7000, 00A0 (r32 APPLE ? Apple00 ? ? ? ?1 Loki ? ? ? 5F) >>> ACPI: SBST 7EEF6000, 0030 (r1 APPLE ? Apple00 ? ? ? ?1 Loki ? ? ? 5F) >>> ACPI: ECDT 7EEF5000, 0053 (r1 APPLE ? Apple00 ? ? ? ?1 Loki ? ? ? 5F) >>> ACPI: SSDT 7EEEF000, 04DC (r1 APPLE ? ? CpuPm ? ? 3000 INTL 20050309) >>> ACPI: SSDT 7EEBD000, 064F (r1 SataRe ?SataPri ? ? 1000 INTL 20050309) >>> ACPI: SSDT 7EEBC000, 069C (r1 SataRe ?SataSec ? ? 1000 INTL 20050309) >>> ACPI: Local APIC address 0xfee00000 >>> (6 early reservations) ==> bootmem [0000000000 - 007e08c000] >>> ?#0 [0000000000 - 0000001000] ? BIOS data page ==> [0000000000 - >>> 0000001000] >>> ?#1 [0000006000 - 0000008000] ? ? ? TRAMPOLINE ==> [0000006000 - >>> 0000008000] >>> ?#2 [0000200000 - 0000a43b8c] ? ?TEXT DATA BSS ==> [0000200000 - >>> 0000a43b8c] >>> ?#3 [0037edf000 - 0037fef088] ? ? ? ? ?RAMDISK ==> [0037edf000 - >>> 0037fef088] >>> ?#4 [000009fc00 - 0000100000] ? ?BIOS reserved ==> [000009fc00 - >>> 0000100000] >>> ?#5 [0000008000 - 000000a000] ? ? ? ? ?PGTABLE ==> [0000008000 - >>> 000000a000] >>> ?[ffffe20000000000-ffffe20001bfffff] PMD -> >>> [ffff880001200000-ffff880002dfffff] on node 0 >>> Zone PFN ranges: >>> ?DMA ? ? ?0x00000000 -> 0x00001000 >>> ?DMA32 ? ?0x00001000 -> 0x00100000 >>> ?Normal ? 0x00100000 -> 0x00100000 >>> Movable zone start PFN for each node >>> early_node_map[2] active PFN ranges >>> ? ?0: 0x00000000 -> 0x0000009f >>> ? ?0: 0x00000100 -> 0x0007e08c >>> On node 0 totalpages: 516139 >>> ?DMA zone: 56 pages used for memmap >>> ?DMA zone: 2216 pages reserved >>> ?DMA zone: 1727 pages, LIFO batch:0 >>> ?DMA32 zone: 7002 pages used for memmap >>> ?DMA32 zone: 505138 pages, LIFO batch:31 >>> ACPI: PM-Timer IO Port: 0x408 >>> ACPI: Local APIC address 0xfee00000 >>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) >>> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >>> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >>> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) >>> IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 >>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >>> ACPI: IRQ0 used by override. >>> ACPI: IRQ2 used by override. >>> ACPI: IRQ9 used by override. >>> Using ACPI (MADT) for SMP configuration information >>> ACPI: HPET id: 0x8086a201 base: 0xfed00000 >>> SMP: Allowing 2 CPUs, 0 hotplug CPUs >>> nr_irqs_gsi: 24 >>> Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) >>> NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 >>> PERCPU: Allocating 53248 bytes of per cpu data >>> Built 1 zonelists in Zone order, mobility grouping on. ?Total pages: >>> 506865 >>> Kernel command line: root=/dev/ram0 init=/linuxrc real_root=/dev/s/sys >>> dolvm >>> Initializing CPU#0 >>> PID hash table entries: 4096 (order: 12, 32768 bytes) >>> Extended CMOS year: 2000 >>> Fast TSC calibration failed >>> TSC: Unable to calibrate against PIT >>> TSC: using PMTIMER reference calibration >>> Detected 2161.212 MHz processor. >>> Console: colour VGA+ 80x25 >>> console [tty0] enabled >>> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) >>> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) >>> Checking aperture... >>> No AGP bridge found >>> Memory: 2022216k/2064944k available (4392k kernel code, 388k absent, >>> 41684k reserved, 2619k data, 372k init) >>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 >>> hpet clockevent registered >>> HPET: 3 timers in total, 0 timers will be used for per-cpu timer >>> Calibrating delay loop (skipped), value calculated using timer >>> frequency.. 4322.42 BogoMIPS (lpj=8644848) >>> Mount-cache hash table entries: 256 >>> CPU: L1 I cache: 32K, L1 D cache: 32K >>> CPU: L2 cache: 4096K >>> [ds] using Core 2/Atom configuration >>> CPU: Physical Processor ID: 0 >>> CPU: Processor Core ID: 0 >>> CPU0: Thermal monitoring enabled (TM2) >>> using mwait in idle threads. >>> ACPI: Core revision 20081204 >>> Setting APIC routing to flat >>> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >>> CPU0: Intel(R) Core(TM)2 CPU ? ? ? ? T7400 ?@ 2.16GHz stepping 06 >>> Booting processor 1 APIC 0x1 ip 0x6000 >>> Initializing CPU#1 >>> Calibrating delay using timer specific routine.. 4322.44 BogoMIPS >>> (lpj=8644898) >>> CPU: L1 I cache: 32K, L1 D cache: 32K >>> CPU: L2 cache: 4096K >>> [ds] using Core 2/Atom configuration >>> CPU: Physical Processor ID: 0 >>> CPU: Processor Core ID: 1 >>> CPU1: Thermal monitoring enabled (TM2) >>> CPU1: Intel(R) Core(TM)2 CPU ? ? ? ? T7400 ?@ 2.16GHz stepping 06 >>> checking TSC synchronization [CPU#0 -> CPU#1]: passed. >>> Brought up 2 CPUs >>> Total of 2 processors activated (8644.87 BogoMIPS). >>> net_namespace: 1784 bytes >>> NET: Registered protocol family 16 >>> ACPI: bus type pci registered >>> PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 >>> PCI: MCFG area at f0000000 reserved in E820 >>> PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 >>> PCI: Using MMCONFIG at f0000000 - f3ffffff >>> PCI: Using configuration type 1 for base access >>> bio: create slab at 0 >>> ACPI: EC: EC description table is found, configuring boot EC >>> ACPI: EC: non-query interrupt received, switching to interrupt mode >>> ACPI: BIOS _OSI(Linux) query ignored >>> ACPI: Interpreter enabled >>> ACPI: (supports S0 S3 S5) >>> ACPI: Using IOAPIC for interrupt routing >>> ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 >>> ACPI: EC: driver started in interrupt mode >>> ACPI: No dock devices found. >>> ACPI: PCI Root Bridge [PCI0] (0000:00) >>> pci 0000:00:02.0: reg 10 32bit mmio: [0x90380000-0x903fffff] >>> pci 0000:00:02.0: reg 14 io port: [0x20e0-0x20e7] >>> pci 0000:00:02.0: reg 18 32bit mmio: [0x80000000-0x8fffffff] >>> pci 0000:00:02.0: reg 1c 32bit mmio: [0x90400000-0x9043ffff] >>> pci 0000:00:02.1: reg 10 32bit mmio: [0x90300000-0x9037ffff] >>> pci 0000:00:07.0: reg 10 32bit mmio: [0x90444000-0x90444fff] >>> pci 0000:00:1b.0: reg 10 64bit mmio: [0x90440000-0x90443fff] >>> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1b.0: PME# disabled >>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1c.0: PME# disabled >>> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1c.1: PME# disabled >>> pci 0000:00:1d.0: reg 20 io port: [0x2080-0x209f] >>> pci 0000:00:1d.1: reg 20 io port: [0x2060-0x207f] >>> pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f] >>> pci 0000:00:1d.3: reg 20 io port: [0x2020-0x203f] >>> pci 0000:00:1d.7: reg 10 32bit mmio: [0x90445400-0x904457ff] >>> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1d.7: PME# disabled >>> pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO >>> pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO >>> pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) >>> pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) >>> pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f) >>> pci 0000:00:1f.1: reg 10 io port: [0x20d8-0x20df] >>> pci 0000:00:1f.1: reg 14 io port: [0x20f4-0x20f7] >>> pci 0000:00:1f.1: reg 18 io port: [0x20d0-0x20d7] >>> pci 0000:00:1f.1: reg 1c io port: [0x20f0-0x20f3] >>> pci 0000:00:1f.1: reg 20 io port: [0x20b0-0x20bf] >>> pci 0000:00:1f.2: reg 10 io port: [0x20c8-0x20cf] >>> pci 0000:00:1f.2: reg 14 io port: [0x20ec-0x20ef] >>> pci 0000:00:1f.2: reg 18 io port: [0x20c0-0x20c7] >>> pci 0000:00:1f.2: reg 1c io port: [0x20e8-0x20eb] >>> pci 0000:00:1f.2: reg 20 io port: [0x20a0-0x20af] >>> pci 0000:00:1f.2: reg 24 32bit mmio: [0x90445000-0x904453ff] >>> pci 0000:00:1f.2: PME# supported from D3hot >>> pci 0000:00:1f.2: PME# disabled >>> pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf] >>> pci 0000:01:00.0: reg 10 64bit mmio: [0x90200000-0x90203fff] >>> pci 0000:01:00.0: reg 18 io port: [0x1000-0x10ff] >>> pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] >>> pci 0000:01:00.0: supports D1 D2 >>> pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold >>> pci 0000:01:00.0: PME# disabled >>> pci 0000:00:1c.0: bridge io port: [0x1000-0x1fff] >>> pci 0000:00:1c.0: bridge 32bit mmio: [0x90200000-0x902fffff] >>> pci 0000:02:00.0: reg 10 64bit mmio: [0x90100000-0x9010ffff] >>> pci 0000:02:00.0: supports D1 >>> pci 0000:02:00.0: PME# supported from D0 D1 D3hot >>> pci 0000:02:00.0: PME# disabled >>> pci 0000:00:1c.1: bridge 32bit mmio: [0x90100000-0x901fffff] >>> pci 0000:03:03.0: reg 10 32bit mmio: [0x90000000-0x90000fff] >>> pci 0000:03:03.0: supports D1 D2 >>> pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot >>> pci 0000:03:03.0: PME# disabled >>> pci 0000:00:1e.0: transparent bridge >>> pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x900fffff] >>> pci_bus 0000:00: on NUMA node 0 >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] >>> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >>> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) >>> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >>> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) >>> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, >>> disabled. >>> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, >>> disabled. >>> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) >>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) >>> SCSI subsystem initialized >>> libata version 3.00 loaded. >>> usbcore: registered new interface driver usbfs >>> usbcore: registered new interface driver hub >>> usbcore: registered new device driver usb >>> PCI: Using ACPI for IRQ routing >>> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 >>> hpet0: 3 comparators, 64-bit 14.318180 MHz counter >>> pnp: PnP ACPI init >>> ACPI: bus type pnp registered >>> pnp 00:07: io resource (0x1640-0x164f) overlaps 0000:00:1c.0 BAR 7 >>> (0x1000-0x1fff), disabling >>> pnp: PnP ACPI: found 9 devices >>> ACPI: ACPI bus type pnp unregistered >>> system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved >>> system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved >>> system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved >>> system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved >>> system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved >>> system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved >>> system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved >>> system 00:07: ioport range 0x680-0x6ef has been reserved >>> system 00:07: ioport range 0x800-0x80f has been reserved >>> system 00:07: ioport range 0x810-0x817 has been reserved >>> system 00:07: ioport range 0x400-0x47f has been reserved >>> system 00:07: ioport range 0x500-0x53f has been reserved >>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 >>> pci 0000:00:1c.0: ? IO window: 0x1000-0x1fff >>> pci 0000:00:1c.0: ? MEM window: 0x90200000-0x902fffff >>> pci 0000:00:1c.0: ? PREFETCH window: 0x00000090500000-0x000000905fffff >>> pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 >>> pci 0000:00:1c.1: ? IO window: disabled >>> pci 0000:00:1c.1: ? MEM window: 0x90100000-0x901fffff >>> pci 0000:00:1c.1: ? PREFETCH window: disabled >>> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 >>> pci 0000:00:1e.0: ? IO window: disabled >>> pci 0000:00:1e.0: ? MEM window: 0x90000000-0x900fffff >>> pci 0000:00:1e.0: ? PREFETCH window: disabled >>> pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>> pci 0000:00:1c.0: setting latency timer to 64 >>> pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 >>> pci 0000:00:1c.1: setting latency timer to 64 >>> pci 0000:00:1e.0: power state changed by ACPI to D0 >>> pci 0000:00:1e.0: setting latency timer to 64 >>> pci_bus 0000:00: resource 0 io: ?[0x00-0xffff] >>> pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] >>> pci_bus 0000:01: resource 0 io: ?[0x1000-0x1fff] >>> pci_bus 0000:01: resource 1 mem: [0x90200000-0x902fffff] >>> pci_bus 0000:01: resource 2 mem: [0x90500000-0x905fffff] >>> pci_bus 0000:01: resource 3 mem: [0x0-0x0] >>> pci_bus 0000:02: resource 0 mem: [0x0-0x0] >>> pci_bus 0000:02: resource 1 mem: [0x90100000-0x901fffff] >>> pci_bus 0000:02: resource 2 mem: [0x0-0x0] >>> pci_bus 0000:02: resource 3 mem: [0x0-0x0] >>> pci_bus 0000:03: resource 0 mem: [0x0-0x0] >>> pci_bus 0000:03: resource 1 mem: [0x90000000-0x900fffff] >>> pci_bus 0000:03: resource 2 mem: [0x0-0x0] >>> pci_bus 0000:03: resource 3 io: ?[0x00-0xffff] >>> pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] >>> NET: Registered protocol family 2 >>> IP route cache hash table entries: 65536 (order: 7, 524288 bytes) >>> TCP established hash table entries: 262144 (order: 10, 4194304 bytes) >>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >>> TCP: Hash tables configured (established 262144 bind 65536) >>> TCP reno registered >>> NET: Registered protocol family 1 >>> checking if image is initramfs... it is >>> Freeing initrd memory: 1088k freed >>> Microcode Update Driver: v2.00 , Peter Oruba >>> HugeTLB registered 2 MB page size, pre-allocated 0 pages >>> Installing knfsd (copyright (C) 1996 okir@monad.swb.de). >>> msgmni has been set to 3953 >>> alg: No test for stdrng (krng) >>> io scheduler noop registered >>> io scheduler anticipatory registered >>> io scheduler deadline registered >>> io scheduler cfq registered (default) >>> pci 0000:00:02.0: Boot video device >>> ACPI: AC Adapter [ADP1] (on-line) >>> Switched to high resolution mode on CPU 1 >>> Switched to high resolution mode on CPU 0 >>> ACPI: Battery Slot [BAT0] (battery present) >>> input: Power Button (FF) as /class/input/input0 >>> ACPI: Power Button (FF) [PWRF] >>> input: Lid Switch as /class/input/input1 >>> ACPI: Lid Switch [LID0] >>> input: Power Button (CM) as /class/input/input2 >>> ACPI: Power Button (CM) [PWRB] >>> input: Sleep Button (CM) as /class/input/input3 >>> ACPI: Sleep Button (CM) [SLPB] >>> ACPI: SSDT 7EEB8C10, 02AE (r1 APPLE ? Cpu0Ist ? ? 3000 INTL 20050309) >>> ACPI: SSDT 7EEB8910, 02A0 (r1 APPLE ? Cpu0Cst ? ? 3001 INTL 20050309) >>> Monitor-Mwait will be used to enter C-1 state >>> Monitor-Mwait will be used to enter C-2 state >>> Monitor-Mwait will be used to enter C-3 state >>> ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) >>> processor ACPI_CPU:00: registered as cooling_device0 >>> ACPI: Processor [CPU0] (supports 8 throttling states) >>> ACPI: SSDT 7EEB8F10, 0087 (r1 APPLE ? Cpu1Ist ? ? 3000 INTL 20050309) >>> ACPI: SSDT 7EEB7F10, 0085 (r1 APPLE ? Cpu1Cst ? ? 3000 INTL 20050309) >>> ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) >>> processor ACPI_CPU:01: registered as cooling_device1 >>> ACPI: Processor [CPU1] (supports 8 throttling states) >>> Real Time Clock Driver v1.12b >>> intel_rng: FWH not detected >>> Linux agpgart interface v0.103 >>> agpgart-intel 0000:00:00.0: Intel 945GM Chipset >>> agpgart-intel 0000:00:00.0: detected 16124K stolen memory >>> agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 >>> intelfb: Framebuffer driver for Intel(R) >>> 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM >>> chipsets >>> intelfb: Version 0.9.6 >>> intelfb 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>> intelfb: 00:02.0: Intel(R) 945GM, aperture size 256MB, stolen memory >>> 16124kB >>> intelfb: Non-CRT device is enabled ( LVDS port ). ?Disabling mode >>> switching. >>> intelfb: Video mode must be programmed at boot time. >>> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled >>> floppy0: no floppy controllers found >>> brd: module loaded >>> loop: module loaded >>> Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI >>> Copyright (c) 1999-2006 Intel Corporation. >>> e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI >>> e100: Copyright(c) 1999-2006 Intel Corporation >>> sky2 driver version 1.22 >>> sky2 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>> sky2 0000:01:00.0: setting latency timer to 64 >>> sky2 0000:01:00.0: Yukon-2 EC chip revision 2 >>> sky2 0000:01:00.0: Marvell Yukon 88E8053 Gigabit Ethernet Controller >>> ?Part Number: Yukon 88E8053 >>> ?Engineering Level: Rev. 2.2 >>> ?Manufacturer: Marvell >>> sky2 0000:01:00.0: irq 24 for MSI/MSI-X >>> sky2 eth0: addr 00:19:e3:43:1c:a3 >>> console [netcon0] enabled >>> netconsole: network logging started >>> Linux video capture interface: v2.00 >>> usbcore: registered new interface driver uvcvideo >>> USB Video Class driver (v0.1.0) >>> Uniform Multi-Platform E-IDE driver >>> piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02) >>> pci 0000:00:1f.1: power state changed by ACPI to D0 >>> pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 >>> piix 0000:00:1f.1: not 100% native mode: will probe irqs later >>> ? ?ide0: BM-DMA at 0x20b0-0x20b7 >>> ? ?ide1: BM-DMA at 0x20b8-0x20bf >>> Probing IDE interface ide0... >>> hda: HL-DT-ST DVDRW GSA-S10N, ATAPI CD/DVD-ROM drive >>> hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 >>> hda: UDMA/33 mode selected >>> Probing IDE interface ide1... >>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >>> ide1 at 0x170-0x177,0x376 on irq 15 >>> ide_generic: please use "probe_mask=0x3f" module parameter for probing >>> all legacy ISA IDE ports >>> ide-gd driver 1.18 >>> ide-cd driver 5.00 >>> ide-cd: hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache >>> Uniform CD-ROM driver Revision: 3.20 >>> 3ware Storage Controller device driver for Linux v1.26.02.002. >>> Driver 'sd' needs updating - please use bus_type methods >>> Driver 'sr' needs updating - please use bus_type methods >>> ata_piix 0000:00:1f.2: version 2.12 >>> ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 >>> ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] >>> ata_piix 0000:00:1f.2: setting latency timer to 64 >>> scsi0 : ata_piix >>> scsi1 : ata_piix >>> ata1: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma 0x20a0 irq 19 >>> ata2: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma 0x20a8 irq 19 >>> ata1.01: ATA-7: ST9160821AS, 3.CAE, max UDMA/133 >>> ata1.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) >>> ata1.01: configured for UDMA/133 >>> isa bounce pool size: 16 pages >>> scsi 0:0:1:0: Direct-Access ? ? ATA ? ? ?ST9160821AS ? ? ?3.CA PQ: 0 ANSI: >>> 5 >>> sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) >>> sd 0:0:1:0: [sda] Write Protect is off >>> sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 >>> sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't >>> support DPO or FUA >>> sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) >>> sd 0:0:1:0: [sda] Write Protect is off >>> sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 >>> sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't >>> support DPO or FUA >>> ?sda: sda1 sda2 sda3 sda4 >>> sd 0:0:1:0: [sda] Attached SCSI disk >>> sd 0:0:1:0: Attached scsi generic sg0 type 0 >>> Fusion MPT base driver 3.04.07 >>> Copyright (c) 1999-2008 LSI Corporation >>> Fusion MPT SPI Host driver 3.04.07 >>> ohci1394 0000:03:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 >>> ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] >>> MMIO=[90000000-900007ff] ?Max Packet=[2048] ?IR/IT contexts=[8/8] >>> ieee1394: raw1394: /dev/raw1394 device initialized >>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >>> ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 >>> ehci_hcd 0000:00:1d.7: setting latency timer to 64 >>> ehci_hcd 0000:00:1d.7: EHCI Host Controller >>> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 >>> ehci_hcd 0000:00:1d.7: debug port 1 >>> ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported >>> ehci_hcd 0000:00:1d.7: irq 21, io mem 0x90445400 >>> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 >>> usb usb1: configuration #1 chosen from 1 choice >>> hub 1-0:1.0: USB hub found >>> hub 1-0:1.0: 8 ports detected >>> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >>> uhci_hcd: USB Universal Host Controller Interface driver >>> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 >>> uhci_hcd 0000:00:1d.0: setting latency timer to 64 >>> uhci_hcd 0000:00:1d.0: UHCI Host Controller >>> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 >>> uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002080 >>> usb usb2: configuration #1 chosen from 1 choice >>> hub 2-0:1.0: USB hub found >>> hub 2-0:1.0: 2 ports detected >>> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 >>> uhci_hcd 0000:00:1d.1: setting latency timer to 64 >>> uhci_hcd 0000:00:1d.1: UHCI Host Controller >>> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 >>> uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 >>> usb usb3: configuration #1 chosen from 1 choice >>> hub 3-0:1.0: USB hub found >>> hub 3-0:1.0: 2 ports detected >>> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>> uhci_hcd 0000:00:1d.2: setting latency timer to 64 >>> uhci_hcd 0000:00:1d.2: UHCI Host Controller >>> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 >>> uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 >>> usb usb4: configuration #1 chosen from 1 choice >>> hub 4-0:1.0: USB hub found >>> hub 4-0:1.0: 2 ports detected >>> uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 >>> uhci_hcd 0000:00:1d.3: setting latency timer to 64 >>> uhci_hcd 0000:00:1d.3: UHCI Host Controller >>> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 >>> uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020 >>> usb usb5: configuration #1 chosen from 1 choice >>> hub 5-0:1.0: USB hub found >>> hub 5-0:1.0: 2 ports detected >>> usbcore: registered new interface driver usblp >>> Initializing USB Mass Storage driver... >>> usbcore: registered new interface driver usb-storage >>> USB Mass Storage support registered. >>> PNP: No PS/2 controller found. Probing ports directly. >>> i8042.c: No controller found. >>> mice: PS/2 mouse device common for all mice >>> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: >>> dm-devel@redhat.com >>> cpuidle: using governor ladder >>> cpuidle: using governor menu >>> Marking TSC unstable due to TSC halts in idle >>> usbcore: registered new interface driver usbhid >>> usbhid: v2.6:USB HID core driver >>> oprofile: using NMI interrupt. >>> Netfilter messages via NETLINK v0.30. >>> nf_conntrack version 0.5.0 (16384 buckets, 65536 max) >>> CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use >>> nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or >>> sysctl net.netfilter.nf_conntrack_acct=1 to enable it. >>> xt_time: kernel timezone is -0000 >>> ip_tables: (C) 2000-2006 Netfilter Core Team >>> arp_tables: (C) 2002 David S. Miller >>> TCP cubic registered >>> NET: Registered protocol family 10 >>> IPv6 over IPv4 tunneling driver >>> NET: Registered protocol family 17 >>> RPC: Registered udp transport module. >>> RPC: Registered tcp transport module. >>> registered taskstats version 1 >>> Freeing unused kernel memory: 372k freed >>> usb 1-1: new high speed USB device using ehci_hcd and address 2 >>> usb 1-1: configuration #1 chosen from 1 choice >>> scsi2 : SCSI emulation for USB Mass Storage devices >>> usb-storage: device found at 2 >>> usb-storage: waiting for device to settle before scanning >>> usb 1-3: new high speed USB device using ehci_hcd and address 4 >>> usb 1-3: configuration #1 chosen from 1 choice >>> hub 1-3:1.0: USB hub found >>> hub 1-3:1.0: 2 ports detected >>> Clocksource tsc unstable (delta = -265511863 ns) >>> usb 1-4: new high speed USB device using ehci_hcd and address 5 >>> usb 1-4: configuration #1 chosen from 1 choice >>> ieee1394: Host added: ID:BUS[0-00:1023] ?GUID[001cb3fffe8ab416] >>> usb 2-2: new full speed USB device using uhci_hcd and address 2 >>> usb 2-2: configuration #1 chosen from 1 choice >>> input: Apple Computer Apple Internal Keyboard / Trackpad as >>> /class/input/input4 >>> apple 0003:05AC:021A.0001: input: USB HID v1.11 Keyboard [Apple >>> Computer Apple Internal Keyboard / Trackpad] on >>> usb-0000:00:1d.0-2/input0 >>> input: Apple Computer Apple Internal Keyboard / Trackpad as >>> /class/input/input5 >>> apple 0003:05AC:021A.0002: input: USB HID v1.11 Device [Apple Computer >>> Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2 >>> usb 4-2: new full speed USB device using uhci_hcd and address 2 >>> usb 4-2: configuration #1 chosen from 1 choice >>> generic-usb 0003:05AC:8240.0003: claimed by neither input, hiddev nor >>> hidraw >>> usb 5-1: new full speed USB device using uhci_hcd and address 2 >>> usb 5-1: configuration #1 chosen from 1 choice >>> input: HID 05ac:1000 as /class/input/input6 >>> generic-usb 0003:05AC:1000.0004: input: USB HID v1.11 Keyboard [HID >>> 05ac:1000] on usb-0000:00:1d.3-1/input0 >>> input: HID 05ac:1000 as /class/input/input7 >>> generic-usb 0003:05AC:1000.0005: input: USB HID v1.11 Mouse [HID >>> 05ac:1000] on usb-0000:00:1d.3-1/input1 >>> usb 1-3.1: new high speed USB device using ehci_hcd and address 8 >>> usb 1-3.1: configuration #1 chosen from 1 choice >>> hub 1-3.1:1.0: USB hub found >>> hub 1-3.1:1.0: 4 ports detected >>> usb 1-3.2: new low speed USB device using ehci_hcd and address 9 >>> usb 1-3.2: configuration #1 chosen from 1 choice >>> input: Logitech USB Mouse as /class/input/input8 >>> generic-usb 0003:046D:C00C.0006: input: USB HID v1.10 Mouse [Logitech >>> USB Mouse] on usb-0000:00:1d.7-3.2/input0 >>> usb 1-3.1.1: new high speed USB device using ehci_hcd and address 10 >>> usb 1-3.1.1: configuration #1 chosen from 1 choice >>> scsi3 : SCSI emulation for USB Mass Storage devices >>> usb-storage: device found at 10 >>> usb-storage: waiting for device to settle before scanning >>> usb 1-3.1.3: new high speed USB device using ehci_hcd and address 11 >>> usb 1-3.1.3: configuration #1 chosen from 1 choice >>> hub 1-3.1.3:1.0: USB hub found >>> hub 1-3.1.3:1.0: 3 ports detected >>> usb 1-3.1.4: new high speed USB device using ehci_hcd and address 12 >>> usb 1-3.1.4: configuration #1 chosen from 1 choice >>> scsi4 : SCSI emulation for USB Mass Storage devices >>> usb-storage: device found at 12 >>> usb-storage: waiting for device to settle before scanning >>> usb 1-3.1.3.1: new low speed USB device using ehci_hcd and address 13 >>> usb 1-3.1.3.1: configuration #1 chosen from 1 choice >>> input: No brand KVM as /class/input/input9 >>> generic-usb 0003:10D5:5552.0007: input: USB HID v1.10 Keyboard [No >>> brand KVM] on usb-0000:00:1d.7-3.1.3.1/input0 >>> input: No brand KVM as /class/input/input10 >>> generic-usb 0003:10D5:5552.0008: input: USB HID v1.10 Mouse [No brand >>> KVM] on usb-0000:00:1d.7-3.1.3.1/input1 >>> scsi 2:0:0:0: Direct-Access ? ? Ext Hard ?Disk ? ? ? ? ? ? ? ? PQ: 0 ANSI: >>> 4 >>> sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB) >>> sd 2:0:0:0: [sdb] Write Protect is off >>> sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00 >>> sd 2:0:0:0: [sdb] Assuming drive cache: write through >>> sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB) >>> sd 2:0:0:0: [sdb] Write Protect is off >>> sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00 >>> sd 2:0:0:0: [sdb] Assuming drive cache: write through >>> ?sdb: sdb1 < sdb5 sdb6 > >>> sd 2:0:0:0: [sdb] Attached SCSI disk >>> sd 2:0:0:0: Attached scsi generic sg1 type 0 >>> usb-storage: device scan complete >>> kjournald starting. ?Commit interval 5 seconds >>> EXT3-fs: mounted filesystem with ordered data mode. >>> udev: renamed network interface eth0 to eth1 >>> scsi 3:0:0:0: Direct-Access ? ? Generic ?Flash HS-CF ? ? ?4.44 PQ: 0 ANSI: >>> 0 >>> sd 3:0:0:0: [sdc] Attached SCSI removable disk >>> sd 3:0:0:0: Attached scsi generic sg2 type 0 >>> usb-storage: device scan complete >>> applesmc: Apple MacBook (v2) detected: >>> applesmc: ?- Model with accelerometer >>> applesmc: ?- Model without light sensors and backlight >>> applesmc: ?- Model with 10 temperature sensors >>> applesmc: device has already been initialized (0xe0, 0xf8). >>> applesmc: device successfully initialized. >>> applesmc: 1 fans found. >>> input: applesmc as /class/input/input11 >>> applesmc: driver successfully loaded. >>> input: PC Speaker as /class/input/input12 >>> scsi 4:0:0:0: Direct-Access ? ? Maxtor 6 L200R0 ? ? ? ? ? BAH4 PQ: 0 ANSI: >>> 0 >>> sd 4:0:0:0: [sdd] 398297087 512-byte hardware sectors: (203 GB/189 GiB) >>> sd 4:0:0:0: [sdd] Write Protect is off >>> sd 4:0:0:0: [sdd] Mode Sense: 03 00 00 00 >>> sd 4:0:0:0: [sdd] Assuming drive cache: write through >>> sd 4:0:0:0: [sdd] 398297087 512-byte hardware sectors: (203 GB/189 GiB) >>> sd 4:0:0:0: [sdd] Write Protect is off >>> sd 4:0:0:0: [sdd] Mode Sense: 03 00 00 00 >>> sd 4:0:0:0: [sdd] Assuming drive cache: write through >>> ?sdd: sdd1 >>> sd 4:0:0:0: [sdd] Attached SCSI disk >>> sd 4:0:0:0: Attached scsi generic sg3 type 0 >>> usb-storage: device scan complete >>> appletouch: Geyser mode initialized. >>> input: appletouch as /class/input/input13 >>> usbcore: registered new interface driver appletouch >>> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 >>> HDA Intel 0000:00:1b.0: setting latency timer to 64 >>> hda_codec: STAC922x, Apple subsys_id=106b2200 >>> input: HDA Intel Line In at Ext Left Jack as /class/input/input14 >>> input: HDA Intel Mic at Ext Left Jack as /class/input/input15 >>> input: HDA Intel HP Out at Ext Left Jack as /class/input/input16 >>> EXT3 FS on dm-2, internal journal >>> fuse init (API version 7.11) >>> usbcore: registered new interface driver usbserial >>> USB Serial support registered for generic >>> usbcore: registered new interface driver usbserial_generic >>> usbserial: USB Serial Driver core >>> USB Serial support registered for pl2303 >>> usbcore: registered new interface driver pl2303 >>> pl2303: Prolific PL2303 USB to serial adaptor driver >>> EXT4-fs: barriers enabled >>> kjournald2 starting: pid 4443, dev dm-0:8, commit interval 5 seconds >>> EXT4 FS on dm-0, internal journal on dm-0:8 >>> EXT4-fs: delayed allocation enabled >>> EXT4-fs: mballoc enabled >>> EXT4-fs: mounted filesystem dm-0 with ordered data mode >>> EXT4-fs: barriers enabled >>> kjournald2 starting: pid 4444, dev dm-4:8, commit interval 5 seconds >>> EXT4 FS on dm-4, internal journal on dm-4:8 >>> EXT4-fs: delayed allocation enabled >>> EXT4-fs: mballoc enabled >>> EXT4-fs: mounted filesystem dm-4 with ordered data mode >>> EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended >>> Adding 1048568k swap on /dev/mapper/s-swap. ?Priority:-1 extents:1 >>> across:1048568k >>> sky2 eth1: enabling interface >>> ADDRCONF(NETDEV_UP): eth1: link is not ready >>> sky2 eth1: Link is up at 1000 Mbps, full duplex, flow control both >>> ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready >>> eth1: no IPv6 routers present >>> [drm] Initialized drm 1.1.0 20060810 >>> pci 0000:00:02.0: setting latency timer to 64 >>> [drm] Initialized i915 1.6.0 20080730 on minor 0 >>> JBD: barrier-based sync failed on dm-0:8 - disabling barriers >>> CE: hpet increasing min_delta_ns to 15000 nsec >>> ACPI: EC: GPE storm detected, transactions will use polling mode >> >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at ?http://vger.kernel.org/majordomo-info.html > Please read the FAQ at ?http://www.tux.org/lkml/ > I see ACPI: EC: GPE storm detected, transactions will use polling mode which might cause stuck-age(try booting without the battery), as for the kernel itself I had no issue with all the way up to 2.6.29-rc8-00302-ge2fad3f (a few hours before the initial release of 2.6.29) if you need my .config let me know(although its not pretty). -- Justin P. Mattock -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/