Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932097AbZCaW5S (ORCPT ); Tue, 31 Mar 2009 18:57:18 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1764035AbZCaWx0 (ORCPT ); Tue, 31 Mar 2009 18:53:26 -0400 Received: from aeryn.fluff.org.uk ([87.194.8.8]:49496 "EHLO kira.home.fluff.org" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1764028AbZCaWxW (ORCPT ); Tue, 31 Mar 2009 18:53:22 -0400 Date: Tue, 31 Mar 2009 23:52:58 +0100 From: Ben Dooks To: Daniel Gl??ckner Cc: Chris Zankel , Ben Dooks , linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org, Oskar Schirmer Subject: Re: [patch 1/5] i2c: xtensa s6000 i2c driver Message-ID: <20090331225258.GN19758@fluff.org.uk> References: <1237820718-30607-1-git-send-email-dg@emlix.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1237820718-30607-1-git-send-email-dg@emlix.com> X-Disclaimer: These are my own opinions, so there! User-Agent: Mutt/1.5.18 (2008-05-17) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 18716 Lines: 598 On Mon, Mar 23, 2009 at 04:05:14PM +0100, Daniel Gl??ckner wrote: > From: Oskar Schirmer > > Support for the s6000 on-chip i2c controller. > > Signed-off-by: Oskar Schirmer > Signed-off-by: Daniel Gl??ckner Not going to merge this on my first pull request to linus, there's a few things that I'd like to get answered before. > --- > drivers/i2c/busses/Kconfig | 10 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-s6000.c | 380 ++++++++++++++++++++++++++++++++++++++++ > drivers/i2c/busses/i2c-s6000.h | 79 +++++++++ > include/linux/i2c/s6000.h | 10 + > 5 files changed, 480 insertions(+), 0 deletions(-) > create mode 100644 drivers/i2c/busses/i2c-s6000.c > create mode 100644 drivers/i2c/busses/i2c-s6000.h > create mode 100644 include/linux/i2c/s6000.h > > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index 7f95905..904def4 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -461,6 +461,16 @@ config I2C_S3C2410 > Say Y here to include support for I2C controller in the > Samsung S3C2410 based System-on-Chip devices. > > +config I2C_S6000 > + tristate "S6000 I2C support" > + depends on XTENSA_VARIANT_S6000 > + help > + This driver supports the on chip I2C device on the > + S6000 xtensa processor family. > + > + To compile this driver as a module, choose M here. The module > + will be called i2c-s6000. > + > config I2C_SH7760 > tristate "Renesas SH7760 I2C Controller" > depends on CPU_SUBTYPE_SH7760 > diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile > index 0c2c4b2..f7989d1 100644 > --- a/drivers/i2c/busses/Makefile > +++ b/drivers/i2c/busses/Makefile > @@ -43,6 +43,7 @@ obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o > obj-$(CONFIG_I2C_PNX) += i2c-pnx.o > obj-$(CONFIG_I2C_PXA) += i2c-pxa.o > obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o > +obj-$(CONFIG_I2C_S6000) += i2c-s6000.o > obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o > obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o > obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o > diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c > new file mode 100644 > index 0000000..88e3fdc > --- /dev/null > +++ b/drivers/i2c/busses/i2c-s6000.c > @@ -0,0 +1,380 @@ > +/* > + * drivers/i2c/busses/i2c-s6000.c > + * > + * Description: Driver for S6000 Family I2C Interface > + * (c) 2008 emlix GmbH Note, I think you need Copyright here as well, (c) needs to be a proper c in circle i've been informed. > + * Author: Oskar Schirmer > + * > + * Partially based on i2c-bfin-twi.c driver by > + * Copyright (c) 2005-2007 Analog Devices, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include "i2c-s6000.h" > + > +#define POLL_TIMEOUT (2 * HZ) > + would be nice to have some documentation for each of the members of this. > +struct s6i2c_if { > + u8 __iomem *reg; > + int irq; > + spinlock_t lock; > + struct i2c_msg *msgs; > + int msgs_num, msgs_push, msgs_done; > + unsigned push, done; > + int timeout_count; > + struct timer_list timeout_timer; > + struct i2c_adapter adap; > + struct completion complete; > + struct clk *clk; > + struct resource *res; > +}; > + > +#define I2C_RD16(iface, n) readw(iface->reg + (n)) > +#define I2C_WR16(iface, n, v) writew(v, iface->reg + (n)) > +#define I2C_RD32(iface, n) readl(iface->reg + (n)) > +#define I2C_WR32(iface, n, v) writel(v, iface->reg + (n)) tried inline functions for these? > + > +static struct s6i2c_if s6i2c_if; > + > +static void s6i2c_handle_interrupt(struct s6i2c_if *iface) > +{ > + if (I2C_RD16(iface, S6_I2C_INTRSTAT) & (1 << S6_I2C_INTR_TXABRT)) { > + I2C_RD16(iface, S6_I2C_CLRTXABRT); > + I2C_WR16(iface, S6_I2C_INTRMASK, 0); > + complete(&iface->complete); > + return; > + } > + if (iface->msgs_done >= iface->msgs_num) { > + printk(KERN_DEBUG "spurious I2C irq: %x\n", > + I2C_RD16(iface, S6_I2C_INTRSTAT)); > + I2C_WR16(iface, S6_I2C_INTRMASK, 0); > + return; > + } > + while ((iface->msgs_push < iface->msgs_num) > + && (I2C_RD16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_TFNF))) { > + struct i2c_msg *m = &iface->msgs[iface->msgs_push]; > + if (!(m->flags & I2C_M_RD)) > + I2C_WR16(iface, S6_I2C_DATACMD, m->buf[iface->push]); > + else > + I2C_WR16(iface, S6_I2C_DATACMD, > + 1 << S6_I2C_DATACMD_READ); > + if (++iface->push >= m->len) { > + iface->push = 0; > + iface->msgs_push += 1; > + } > + } > + do { > + struct i2c_msg *m = &iface->msgs[iface->msgs_done]; > + if (!(m->flags & I2C_M_RD)) { > + if (iface->msgs_done < iface->msgs_push) > + iface->msgs_done += 1; > + else > + break; > + } else if (I2C_RD16(iface, S6_I2C_STATUS) > + & (1 << S6_I2C_STATUS_RFNE)) { > + m->buf[iface->done] = I2C_RD16(iface, S6_I2C_DATACMD); > + if (++iface->done >= m->len) { > + iface->done = 0; > + iface->msgs_done += 1; > + } > + } else{ > + break; > + } > + } while (iface->msgs_done < iface->msgs_num); > + if (iface->msgs_done >= iface->msgs_num) { > + I2C_WR16(iface, S6_I2C_INTRMASK, 1 << S6_I2C_INTR_TXABRT); > + complete(&iface->complete); > + } else if (iface->msgs_push >= iface->msgs_num) { > + I2C_WR16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXABRT) | > + (1 << S6_I2C_INTR_RXFULL)); > + } else { > + I2C_WR16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXABRT) | > + (1 << S6_I2C_INTR_TXEMPTY) | > + (1 << S6_I2C_INTR_RXFULL)); > + } > +} > + > +static irqreturn_t s6i2c_interrupt_entry(int irq, void *dev_id) > +{ > + struct s6i2c_if *iface = dev_id; > + if (!(I2C_RD16(iface, S6_I2C_STATUS) & ((1 << S6_I2C_INTR_RXUNDER) > + | (1 << S6_I2C_INTR_RXOVER) > + | (1 << S6_I2C_INTR_RXFULL) > + | (1 << S6_I2C_INTR_TXOVER) > + | (1 << S6_I2C_INTR_TXEMPTY) > + | (1 << S6_I2C_INTR_RDREQ) > + | (1 << S6_I2C_INTR_TXABRT) > + | (1 << S6_I2C_INTR_RXDONE) > + | (1 << S6_I2C_INTR_ACTIVITY) > + | (1 << S6_I2C_INTR_STOPDET) > + | (1 << S6_I2C_INTR_STARTDET) > + | (1 << S6_I2C_INTR_GENCALL)))) > + return IRQ_NONE; > + > + spin_lock(&iface->lock); > + del_timer(&iface->timeout_timer); > + s6i2c_handle_interrupt(iface); > + spin_unlock(&iface->lock); > + return IRQ_HANDLED; > +} > + > +static void s6i2c_timeout(unsigned long data) > +{ > + struct s6i2c_if *iface = (struct s6i2c_if *)data; > + unsigned long flags; > + > + spin_lock_irqsave(&iface->lock, flags); > + s6i2c_handle_interrupt(iface); > + if (--iface->timeout_count > 0) { > + iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; > + add_timer(&iface->timeout_timer); > + } else { > + complete(&iface->complete); > + I2C_WR16(iface, S6_I2C_INTRMASK, 0); > + } > + spin_unlock_irqrestore(&iface->lock, flags); > +} > + > +static int s6i2c_master_xfer(struct i2c_adapter *adap, > + struct i2c_msg *msgs, int num) > +{ > + struct s6i2c_if *iface = adap->algo_data; > + int i; > + if (num == 0) > + return 0; > + if (I2C_RD16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_ACTIVITY)) > + yield(); > + I2C_WR16(iface, S6_I2C_INTRMASK, 0); > + I2C_RD16(iface, S6_I2C_CLRINTR); > + for (i = 0; i < num; i++) { > + if (msgs[i].flags & I2C_M_TEN) { > + dev_err(&(adap->dev), > + "s6i2c: 10 bits addr not supported\n"); > + return -EINVAL; > + } > + if (msgs[i].len == 0) { > + dev_err(&(adap->dev), > + "s6i2c: zero length message not supported\n"); > + return -EINVAL; > + } > + if (msgs[i].addr != msgs[0].addr) { > + dev_err(&(adap->dev), > + "s6i2c: multiple xfer cannot change target\n"); > + return -EINVAL; > + } > + } > + iface->msgs = msgs; > + iface->msgs_num = num; > + iface->msgs_push = 0; > + iface->msgs_done = 0; > + iface->push = 0; > + iface->done = 0; > + iface->timeout_count = 10; > + I2C_WR16(iface, S6_I2C_TAR, msgs[0].addr); > + I2C_WR16(iface, S6_I2C_ENABLE, 1); > + I2C_WR16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXEMPTY) | > + (1 << S6_I2C_INTR_TXABRT)); > + iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; > + add_timer(&iface->timeout_timer); > + wait_for_completion(&iface->complete); > + del_timer_sync(&iface->timeout_timer); > + while (I2C_RD32(iface, S6_I2C_TXFLR) > 0) > + schedule(); > + while (I2C_RD16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_ACTIVITY)) > + schedule(); > + I2C_WR16(iface, S6_I2C_INTRMASK, 0); > + I2C_WR16(iface, S6_I2C_ENABLE, 0); > + return iface->msgs_done; > +} > + > +static u32 s6i2c_functionality(struct i2c_adapter *adap) > +{ > + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; > +} > + > +static struct i2c_algorithm s6i2c_algorithm = { > + .master_xfer = s6i2c_master_xfer, > + .functionality = s6i2c_functionality, > +}; > + > +static u16 __devinit nanoseconds_on_clk(struct s6i2c_if *iface, u32 ns) > +{ > + u64 dividend = (u64)ns * clk_get_rate(iface->clk); > + do_div(dividend, 1000000000); > + if (dividend > 0xffff) > + return 0xffff; > + return dividend; > +} do you desperately need to be _that_ accurate? > +static int __devinit s6i2c_probe(struct platform_device *dev) > +{ > + struct s6i2c_if *iface = &s6i2c_if; > + struct i2c_adapter *p_adap; > + const char *clock; > + int bus_num, rc; > + spin_lock_init(&(iface->lock)); > + init_completion(&(iface->complete)); please don't do &(variable) it is fugly. > + iface->irq = platform_get_irq(dev, 0); > + if (iface->irq < 0) { > + rc = iface->irq; > + goto err_out; > + } > + iface->res = platform_get_resource(dev, IORESOURCE_MEM, 0); > + if (!iface->res) { > + rc = -ENXIO; > + goto err_out; > + } > + iface->res = request_mem_region(iface->res->start, > + iface->res->end - iface->res->start + 1, > + dev->dev.bus_id); > + if (!iface->res) { > + rc = -EBUSY; > + goto err_out; > + } > + iface->reg = ioremap_nocache(iface->res->start, > + iface->res->end - iface->res->start + 1); > + if (!iface->reg) { > + rc = -ENOMEM; > + goto err_reg; > + } > + clock = 0; > + bus_num = -1; > + if (dev->dev.platform_data) { > + struct s6_i2c_platform_data *pdata = dev->dev.platform_data; > + bus_num = pdata->bus_num; > + clock = pdata->clock; > + } > + iface->clk = clk_get(&dev->dev, clock); > + if (IS_ERR(iface->clk)) { > + rc = PTR_ERR(iface->clk); > + goto err_map; > + } passing the name in the platform device is a bit nasty, if there's only one clock for the device then it should have been dealt with at the arch level and doing clk_get(&dev->dev, NULL) should be acceptable. > + rc = clk_enable(iface->clk); > + if (rc < 0) > + goto err_clk_put; > + init_timer(&(iface->timeout_timer)); > + iface->timeout_timer.function = s6i2c_timeout; > + iface->timeout_timer.data = (unsigned long)iface; > + p_adap = &iface->adap; > + strlcpy(p_adap->name, dev->name, sizeof(p_adap->name)); > + p_adap->algo = &s6i2c_algorithm; > + p_adap->algo_data = iface; > + p_adap->nr = bus_num; > + p_adap->class = 0; > + p_adap->dev.parent = &dev->dev; some spacing for readability would be nice. > + I2C_WR16(iface, S6_I2C_INTRMASK, 0); > + rc = request_irq(iface->irq, s6i2c_interrupt_entry, > + IRQF_SHARED, dev->name, iface); > + if (rc) { > + dev_err(&(p_adap->dev), "s6i2c: cant get IRQ %d\n", iface->irq); > + goto err_clk_dis; > + } > + I2C_WR16(iface, S6_I2C_ENABLE, 0); > + udelay(1); > + I2C_WR32(iface, S6_I2C_SRESET, 1 << S6_I2C_SRESET_IC_SRST); > + I2C_WR16(iface, S6_I2C_CLRTXABRT, 1); > + I2C_WR16(iface, S6_I2C_CON, > + (1 << S6_I2C_CON_MASTER) | > + (S6_I2C_CON_SPEED_NORMAL << S6_I2C_CON_SPEED) | > + (0 << S6_I2C_CON_10BITSLAVE) | > + (0 << S6_I2C_CON_10BITMASTER) | > + (1 << S6_I2C_CON_RESTARTENA) | > + (1 << S6_I2C_CON_SLAVEDISABLE)); > + I2C_WR16(iface, S6_I2C_SSHCNT, nanoseconds_on_clk(iface, 4000)); > + I2C_WR16(iface, S6_I2C_SSLCNT, nanoseconds_on_clk(iface, 4700)); > + I2C_WR16(iface, S6_I2C_FSHCNT, nanoseconds_on_clk(iface, 600)); > + I2C_WR16(iface, S6_I2C_FSLCNT, nanoseconds_on_clk(iface, 1300)); > + I2C_WR16(iface, S6_I2C_RXTL, 0); > + I2C_WR16(iface, S6_I2C_TXTL, 0); > + platform_set_drvdata(dev, iface); > + if (bus_num < 0) > + rc = i2c_add_adapter(p_adap); > + else > + rc = i2c_add_numbered_adapter(p_adap); > + if (rc) > + goto err_irq_free; > + return 0; > + > +err_irq_free: > + free_irq(iface->irq, iface); > +err_clk_dis: > + clk_disable(iface->clk); > +err_clk_put: > + clk_put(iface->clk); > +err_map: > + iounmap(iface->reg); > +err_reg: > + release_mem_region(iface->res->start, > + iface->res->end - iface->res->start + 1); > +err_out: > + return rc; > +} > + > +static int __devexit s6i2c_remove(struct platform_device *pdev) > +{ > + struct s6i2c_if *iface = platform_get_drvdata(pdev); > + I2C_WR16(iface, S6_I2C_ENABLE, 0); > + platform_set_drvdata(pdev, NULL); > + i2c_del_adapter(&(iface->adap)); > + free_irq(iface->irq, iface); > + clk_disable(iface->clk); > + clk_put(iface->clk); > + iounmap(iface->reg); > + release_mem_region(iface->res->start, > + iface->res->end - iface->res->start + 1); resource_size() would be good here, and elsewhere in the driver. > + return 0; > +} > + > +static struct platform_driver s6i2c_driver = { > + .probe = s6i2c_probe, > + .remove = __devexit_p(s6i2c_remove), > + .driver = { > + .name = "i2c-s6000", > + .owner = THIS_MODULE, > + }, > +}; > + > +static int __init s6i2c_init(void) > +{ > + pr_info("I2C: S6000 I2C driver\n"); > + return platform_driver_register(&s6i2c_driver); > +} > + > +static void __exit s6i2c_exit(void) > +{ > + platform_driver_unregister(&s6i2c_driver); > +} > + > +MODULE_DESCRIPTION("I2C-Bus adapter routines for S6000 I2C"); > +MODULE_LICENSE("GPL"); > + > +subsys_initcall(s6i2c_init); > +module_exit(s6i2c_exit); as a note, the code is quite dense, a few blank lines would be nice. > diff --git a/drivers/i2c/busses/i2c-s6000.h b/drivers/i2c/busses/i2c-s6000.h > new file mode 100644 > index 0000000..ff23b81 > --- /dev/null > +++ b/drivers/i2c/busses/i2c-s6000.h > @@ -0,0 +1,79 @@ > +/* > + * drivers/i2c/busses/i2c-s6000.h > + * > + * This file is subject to the terms and conditions of the GNU General Public > + * License. See the file "COPYING" in the main directory of this archive > + * for more details. > + * > + * Copyright (C) 2008 Emlix GmbH > + * Author: Oskar Schirmer > + */ > + > +#ifndef __DRIVERS_I2C_BUSSES_I2C_S6000_H > +#define __DRIVERS_I2C_BUSSES_I2C_S6000_H > + > +#define S6_I2C_CON 0x000 > +#define S6_I2C_CON_MASTER 0 > +#define S6_I2C_CON_SPEED 1 > +#define S6_I2C_CON_SPEED_NORMAL 1 > +#define S6_I2C_CON_SPEED_FAST 2 > +#define S6_I2C_CON_SPEED_MASK 3 > +#define S6_I2C_CON_10BITSLAVE 3 > +#define S6_I2C_CON_10BITMASTER 4 > +#define S6_I2C_CON_RESTARTENA 5 > +#define S6_I2C_CON_SLAVEDISABLE 6 > +#define S6_I2C_TAR 0x004 > +#define S6_I2C_TAR_GCORSTART 10 > +#define S6_I2C_TAR_SPECIAL 11 > +#define S6_I2C_SAR 0x008 > +#define S6_I2C_HSMADDR 0x00C > +#define S6_I2C_DATACMD 0x010 > +#define S6_I2C_DATACMD_READ 8 > +#define S6_I2C_SSHCNT 0x014 > +#define S6_I2C_SSLCNT 0x018 > +#define S6_I2C_FSHCNT 0x01C > +#define S6_I2C_FSLCNT 0x020 > +#define S6_I2C_INTRSTAT 0x02C > +#define S6_I2C_INTRMASK 0x030 > +#define S6_I2C_RAWINTR 0x034 > +#define S6_I2C_INTR_RXUNDER 0 > +#define S6_I2C_INTR_RXOVER 1 > +#define S6_I2C_INTR_RXFULL 2 > +#define S6_I2C_INTR_TXOVER 3 > +#define S6_I2C_INTR_TXEMPTY 4 > +#define S6_I2C_INTR_RDREQ 5 > +#define S6_I2C_INTR_TXABRT 6 > +#define S6_I2C_INTR_RXDONE 7 > +#define S6_I2C_INTR_ACTIVITY 8 > +#define S6_I2C_INTR_STOPDET 9 > +#define S6_I2C_INTR_STARTDET 10 > +#define S6_I2C_INTR_GENCALL 11 > +#define S6_I2C_RXTL 0x038 > +#define S6_I2C_TXTL 0x03C > +#define S6_I2C_CLRINTR 0x040 > +#define S6_I2C_CLRRXUNDER 0x044 > +#define S6_I2C_CLRRXOVER 0x048 > +#define S6_I2C_CLRTXOVER 0x04C > +#define S6_I2C_CLRRDREQ 0x050 > +#define S6_I2C_CLRTXABRT 0x054 > +#define S6_I2C_CLRRXDONE 0x058 > +#define S6_I2C_CLRACTIVITY 0x05C > +#define S6_I2C_CLRSTOPDET 0x060 > +#define S6_I2C_CLRSTARTDET 0x064 > +#define S6_I2C_CLRGENCALL 0x068 > +#define S6_I2C_ENABLE 0x06C > +#define S6_I2C_STATUS 0x070 > +#define S6_I2C_STATUS_ACTIVITY 0 > +#define S6_I2C_STATUS_TFNF 1 > +#define S6_I2C_STATUS_TFE 2 > +#define S6_I2C_STATUS_RFNE 3 > +#define S6_I2C_STATUS_RFF 4 > +#define S6_I2C_TXFLR 0x074 > +#define S6_I2C_RXFLR 0x078 > +#define S6_I2C_SRESET 0x07C > +#define S6_I2C_SRESET_IC_SRST 0 > +#define S6_I2C_SRESET_IC_MASTER_SRST 1 > +#define S6_I2C_SRESET_IC_SLAVE_SRST 2 > +#define S6_I2C_TXABRTSOURCE 0x080 > + > +#endif > diff --git a/include/linux/i2c/s6000.h b/include/linux/i2c/s6000.h and again. > new file mode 100644 > index 0000000..0b6b0c6 > --- /dev/null > +++ b/include/linux/i2c/s6000.h > @@ -0,0 +1,10 @@ > +#ifndef __LINUX_I2C_S6000_H > +#define __LINUX_I2C_S6000_H > + documentation comments would be nice here too. > +struct s6_i2c_platform_data { > + const char *clock; > + int bus_num; > +}; > + > +#endif > + > -- > 1.6.2.107.ge47ee > > -- > To unsubscribe from this list: send the line "unsubscribe linux-i2c" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Ben (ben@fluff.org, http://www.fluff.org/) 'a smiley only costs 4 bytes' -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/