Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757957AbZDGOmy (ORCPT ); Tue, 7 Apr 2009 10:42:54 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1757807AbZDGOm2 (ORCPT ); Tue, 7 Apr 2009 10:42:28 -0400 Received: from earthlight.etchedpixels.co.uk ([81.2.110.250]:43323 "EHLO t61.ukuu.org.uk" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1757719AbZDGOm0 (ORCPT ); Tue, 7 Apr 2009 10:42:26 -0400 From: Alan Cox Subject: [PATCH 06/11] Only CTS bit is affected. To: torvalds@linux-foundation.org, linux-kernel@vger.kernel.org Date: Tue, 07 Apr 2009 16:41:22 +0100 Message-ID: <20090407154118.17182.93535.stgit@t61.ukuu.org.uk> In-Reply-To: <20090407153824.17182.81672.stgit@t61.ukuu.org.uk> References: <20090407153824.17182.81672.stgit@t61.ukuu.org.uk> User-Agent: StGIT/0.14.3 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13605 Lines: 452 From: Sonic Zhang Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: Alan Cox --- .../mach-bf527/include/mach/bfin_serial_5xx.h | 26 ---- .../mach-bf533/include/mach/bfin_serial_5xx.h | 20 --- .../mach-bf537/include/mach/bfin_serial_5xx.h | 27 ---- .../mach-bf548/include/mach/bfin_serial_5xx.h | 45 ------- .../mach-bf561/include/mach/bfin_serial_5xx.h | 20 --- drivers/serial/bfin_5xx.c | 131 +++++++++++++------- 6 files changed, 82 insertions(+), 187 deletions(-) diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h index e8c41fd..d2b160c 100644 --- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -167,29 +167,3 @@ struct bfin_serial_res bfin_serial_resource[] = { }; #define DRIVER_NAME "bfin-uart" - -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ - -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART1 - peripheral_request(P_UART1_TX, DRIVER_NAME); - peripheral_request(P_UART1_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } -#endif -} diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h index 5f517f5..70356dd 100644 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -142,23 +142,3 @@ struct bfin_serial_res bfin_serial_resource[] = { }; #define DRIVER_NAME "bfin-uart" - -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ - -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } -#endif -} diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h index 9e34700..d46fc4f 100644 --- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h @@ -99,7 +99,6 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct timer_list cts_timer; int cts_pin; int rts_pin; #endif @@ -167,29 +166,3 @@ struct bfin_serial_res bfin_serial_resource[] = { }; #define DRIVER_NAME "bfin-uart" - -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ - -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART1 - peripheral_request(P_UART1_TX, DRIVER_NAME); - peripheral_request(P_UART1_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } -#endif -} diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h index c05e79c..388e232 100644 --- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h @@ -181,48 +181,3 @@ struct bfin_serial_res bfin_serial_resource[] = { }; #define DRIVER_NAME "bfin-uart" - -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART1 - peripheral_request(P_UART1_TX, DRIVER_NAME); - peripheral_request(P_UART1_RX, DRIVER_NAME); - -#ifdef CONFIG_BFIN_UART1_CTSRTS - peripheral_request(P_UART1_RTS, DRIVER_NAME); - peripheral_request(P_UART1_CTS, DRIVER_NAME); -#endif -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART2 - peripheral_request(P_UART2_TX, DRIVER_NAME); - peripheral_request(P_UART2_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART3 - peripheral_request(P_UART3_TX, DRIVER_NAME); - peripheral_request(P_UART3_RX, DRIVER_NAME); - -#ifdef CONFIG_BFIN_UART3_CTSRTS - peripheral_request(P_UART3_RTS, DRIVER_NAME); - peripheral_request(P_UART3_CTS, DRIVER_NAME); -#endif -#endif - SSYNC(); -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } -#endif -} diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h index ca8c5f6..d0469e3 100644 --- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h @@ -142,23 +142,3 @@ struct bfin_serial_res bfin_serial_resource[] = { }; #define DRIVER_NAME "bfin-uart" - -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ - -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } -#endif -} diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index f9b5a72..fbbddb9 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -63,7 +63,6 @@ static int kgdboc_break_enabled; #define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) #define DMA_RX_FLUSH_JIFFIES (HZ / 50) -#define CTS_CHECK_JIFFIES (HZ / 50) #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); @@ -71,8 +70,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); static void bfin_serial_tx_chars(struct bfin_serial_port *uart); #endif -static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); - static void bfin_serial_reset_irda(struct uart_port *port); /* @@ -264,12 +261,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) { struct circ_buf *xmit = &uart->port.info->xmit; - /* - * Check the modem control lines before - * transmitting anything. - */ - bfin_serial_mctrl_check(uart); - if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { #ifdef CONFIG_BF54x /* Clear TFI bit */ @@ -328,12 +319,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) uart->tx_done = 0; - /* - * Check the modem control lines before - * transmitting anything. - */ - bfin_serial_mctrl_check(uart); - if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { uart->tx_count = 0; uart->tx_done = 1; @@ -524,29 +509,21 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) #endif } +#ifdef CONFIG_SERIAL_BFIN_CTSRTS /* - * Handle any change of modem status signal since we were last called. + * Handle any change of modem status signal. */ -static void bfin_serial_mctrl_check(struct bfin_serial_port *uart) +static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id) { -#ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct bfin_serial_port *uart = dev_id; unsigned int status; - struct uart_info *info = uart->port.info; - struct tty_struct *tty = info->port.tty; status = bfin_serial_get_mctrl(&uart->port); uart_handle_cts_change(&uart->port, status & TIOCM_CTS); - if (!(status & TIOCM_CTS)) { - tty->hw_stopped = 1; - uart->cts_timer.data = (unsigned long)(uart); - uart->cts_timer.function = (void *)bfin_serial_mctrl_check; - uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES; - add_timer(&(uart->cts_timer)); - } else { - tty->hw_stopped = 0; - } -#endif + + return IRQ_HANDLED; } +#endif /* * Interrupts are always disabled. @@ -606,7 +583,7 @@ static int bfin_serial_startup(struct uart_port *port) uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; add_timer(&(uart->rx_dma_timer)); #else -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ +# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) if (kgdboc_port_line == uart->port.line && kgdboc_break_enabled) kgdboc_break_enabled = 0; @@ -661,11 +638,28 @@ static int bfin_serial_startup(struct uart_port *port) } } # endif -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ +# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) } # endif #endif + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + if (request_irq(gpio_to_irq(uart->cts_pin), + bfin_serial_mctrl_cts_int, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_DISABLED, "BFIN_UART_CTS", uart)) { + uart->cts_pin = -1; + pr_info("Unable to attach BlackFin UART CTS interrupt.\ + So, disable it.\n"); + } + } + if (uart->rts_pin >= 0) { + gpio_request(uart->rts_pin, DRIVER_NAME); + gpio_direction_output(uart->rts_pin, 0); + } +#endif UART_SET_IER(uart, ERBFI); return 0; } @@ -699,6 +693,13 @@ static void bfin_serial_shutdown(struct uart_port *port) free_irq(uart->port.irq, uart); free_irq(uart->port.irq+1, uart); #endif + +# ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) + free_irq(gpio_to_irq(uart->cts_pin), uart); + if (uart->rts_pin >= 0) + gpio_free(uart->rts_pin); +# endif } static void @@ -864,6 +865,20 @@ static void bfin_serial_set_ldisc(struct uart_port *port) } } +static void bfin_serial_reset_irda(struct uart_port *port) +{ + int line = port->line; + unsigned short val; + + val = UART_GET_GCTL(&bfin_serial_ports[line]); + val &= ~(IREN | RPOLC); + UART_PUT_GCTL(&bfin_serial_ports[line], val); + SSYNC(); + val |= (IREN | RPOLC); + UART_PUT_GCTL(&bfin_serial_ports[line], val); + SSYNC(); +} + #ifdef CONFIG_CONSOLE_POLL static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr) { @@ -909,20 +924,6 @@ static int bfin_kgdboc_port_startup(struct uart_port *port) } #endif -static void bfin_serial_reset_irda(struct uart_port *port) -{ - int line = port->line; - unsigned short val; - - val = UART_GET_GCTL(&bfin_serial_ports[line]); - val &= ~(IREN | RPOLC); - UART_PUT_GCTL(&bfin_serial_ports[line], val); - SSYNC(); - val |= (IREN | RPOLC); - UART_PUT_GCTL(&bfin_serial_ports[line], val); - SSYNC(); -} - static struct uart_ops bfin_serial_pops = { .tx_empty = bfin_serial_tx_empty, .set_mctrl = bfin_serial_set_mctrl, @@ -952,6 +953,39 @@ static struct uart_ops bfin_serial_pops = { #endif }; +static void __init bfin_serial_hw_init(void) +{ +#ifdef CONFIG_SERIAL_BFIN_UART0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_SERIAL_BFIN_UART1 + peripheral_request(P_UART1_TX, DRIVER_NAME); + peripheral_request(P_UART1_RX, DRIVER_NAME); + +# if defined(CONFIG_BFIN_UART1_CTSRTS) && defined(CONFIG_BF54x) + peripheral_request(P_UART1_RTS, DRIVER_NAME); + peripheral_request(P_UART1_CTS, DRIVER_NAME); +# endif +#endif + +#ifdef CONFIG_SERIAL_BFIN_UART2 + peripheral_request(P_UART2_TX, DRIVER_NAME); + peripheral_request(P_UART2_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_SERIAL_BFIN_UART3 + peripheral_request(P_UART3_TX, DRIVER_NAME); + peripheral_request(P_UART3_RX, DRIVER_NAME); + +# if defined(CONFIG_BFIN_UART3_CTSRTS) && defined(CONFIG_BF54x) + peripheral_request(P_UART3_RTS, DRIVER_NAME); + peripheral_request(P_UART3_CTS, DRIVER_NAME); +# endif +#endif +} + static void __init bfin_serial_init_ports(void) { static int first = 1; @@ -961,6 +995,8 @@ static void __init bfin_serial_init_ports(void) return; first = 0; + bfin_serial_hw_init(); + for (i = 0; i < nr_active_ports; i++) { bfin_serial_ports[i].port.uartclk = get_sclk(); bfin_serial_ports[i].port.fifosize = BFIN_UART_TX_FIFO_SIZE; @@ -984,15 +1020,12 @@ static void __init bfin_serial_init_ports(void) init_timer(&(bfin_serial_ports[i].rx_dma_timer)); #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - init_timer(&(bfin_serial_ports[i].cts_timer)); bfin_serial_ports[i].cts_pin = bfin_serial_resource[i].uart_cts_pin; bfin_serial_ports[i].rts_pin = bfin_serial_resource[i].uart_rts_pin; #endif - bfin_serial_hw_init(&bfin_serial_ports[i]); } - } #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/