Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934982AbZDIQfo (ORCPT ); Thu, 9 Apr 2009 12:35:44 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S935446AbZDIQ3b (ORCPT ); Thu, 9 Apr 2009 12:29:31 -0400 Received: from victor.provo.novell.com ([137.65.250.26]:60775 "EHLO victor.provo.novell.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S935391AbZDIQ3Y (ORCPT ); Thu, 9 Apr 2009 12:29:24 -0400 From: Gregory Haskins Subject: [RFC PATCH v2 09/19] net: Add vbus_enet driver To: linux-kernel@vger.kernel.org Cc: agraf@suse.de, pmullaney@novell.com, pmorreale@novell.com, anthony@codemonkey.ws, rusty@rustcorp.com.au, netdev@vger.kernel.org, kvm@vger.kernel.org, avi@redhat.com, bhutchings@solarflare.com, andi@firstfloor.org, gregkh@suse.de, herber@gondor.apana.org.au, chrisw@sous-sol.org, shemminger@vyatta.com Date: Thu, 09 Apr 2009 12:31:29 -0400 Message-ID: <20090409163128.32740.46975.stgit@dev.haskins.net> In-Reply-To: <20090409155200.32740.19358.stgit@dev.haskins.net> References: <20090409155200.32740.19358.stgit@dev.haskins.net> User-Agent: StGIT/0.14.3 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 17991 Lines: 735 Signed-off-by: Gregory Haskins --- drivers/net/Kconfig | 13 + drivers/net/Makefile | 1 drivers/net/vbus-enet.c | 680 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 694 insertions(+), 0 deletions(-) create mode 100644 drivers/net/vbus-enet.c diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 62d732a..ac9dabd 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -3099,4 +3099,17 @@ config VIRTIO_NET This is the virtual network driver for virtio. It can be used with lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. +config VBUS_ENET + tristate "Virtual Ethernet Driver" + depends on VBUS_DRIVERS + help + A virtualized 802.x network device based on the VBUS interface. + It can be used with any hypervisor/kernel that supports the + vbus protocol. + +config VBUS_ENET_DEBUG + bool "Enable Debugging" + depends on VBUS_ENET + default n + endif # NETDEVICES diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 471baaf..61db928 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -264,6 +264,7 @@ obj-$(CONFIG_FS_ENET) += fs_enet/ obj-$(CONFIG_NETXEN_NIC) += netxen/ obj-$(CONFIG_NIU) += niu.o obj-$(CONFIG_VIRTIO_NET) += virtio_net.o +obj-$(CONFIG_VBUS_ENET) += vbus-enet.o obj-$(CONFIG_SFC) += sfc/ obj-$(CONFIG_WIMAX) += wimax/ diff --git a/drivers/net/vbus-enet.c b/drivers/net/vbus-enet.c new file mode 100644 index 0000000..3779f77 --- /dev/null +++ b/drivers/net/vbus-enet.c @@ -0,0 +1,680 @@ +/* + * vbus_enet - A virtualized 802.x network device based on the VBUS interface + * + * Copyright (C) 2009 Novell, Gregory Haskins + * + * Derived from the SNULL example from the book "Linux Device Drivers" by + * Alessandro Rubini, Jonathan Corbet, and Greg Kroah-Hartman, published + * by O'Reilly & Associates. + */ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +MODULE_AUTHOR("Gregory Haskins"); +MODULE_LICENSE("GPL"); + +static int napi_weight = 128; +module_param(napi_weight, int, 0444); +static int rx_ringlen = 256; +module_param(rx_ringlen, int, 0444); +static int tx_ringlen = 256; +module_param(tx_ringlen, int, 0444); + +#undef PDEBUG /* undef it, just in case */ +#ifdef VBUS_ENET_DEBUG +# define PDEBUG(fmt, args...) printk(KERN_DEBUG "vbus_enet: " fmt, ## args) +#else +# define PDEBUG(fmt, args...) /* not debugging: nothing */ +#endif + +struct vbus_enet_queue { + struct ioq *queue; + struct ioq_notifier notifier; +}; + +struct vbus_enet_priv { + spinlock_t lock; + struct net_device *dev; + struct vbus_device_proxy *vdev; + struct napi_struct napi; + struct vbus_enet_queue rxq; + struct vbus_enet_queue txq; + struct tasklet_struct txtask; +}; + +static struct vbus_enet_priv * +napi_to_priv(struct napi_struct *napi) +{ + return container_of(napi, struct vbus_enet_priv, napi); +} + +static int +queue_init(struct vbus_enet_priv *priv, + struct vbus_enet_queue *q, + int qid, + size_t ringsize, + void (*func)(struct ioq_notifier *)) +{ + struct vbus_device_proxy *dev = priv->vdev; + int ret; + + ret = vbus_driver_ioq_alloc(dev, qid, 0, ringsize, &q->queue); + if (ret < 0) + panic("ioq_alloc failed: %d\n", ret); + + if (func) { + q->notifier.signal = func; + q->queue->notifier = &q->notifier; + } + + return 0; +} + +static int +devcall(struct vbus_enet_priv *priv, u32 func, void *data, size_t len) +{ + struct vbus_device_proxy *dev = priv->vdev; + + return dev->ops->call(dev, func, data, len, 0); +} + +/* + * --------------- + * rx descriptors + * --------------- + */ + +static void +rxdesc_alloc(struct ioq_ring_desc *desc, size_t len) +{ + struct sk_buff *skb; + + len += ETH_HLEN; + + skb = dev_alloc_skb(len + 2); + BUG_ON(!skb); + + skb_reserve(skb, 2); /* align IP on 16B boundary */ + + desc->cookie = (u64)skb; + desc->ptr = (u64)__pa(skb->data); + desc->len = len; /* total length */ + desc->valid = 1; +} + +static void +rx_setup(struct vbus_enet_priv *priv) +{ + struct ioq *ioq = priv->rxq.queue; + struct ioq_iterator iter; + int ret; + + /* + * We want to iterate on the "valid" index. By default the iterator + * will not "autoupdate" which means it will not hypercall the host + * with our changes. This is good, because we are really just + * initializing stuff here anyway. Note that you can always manually + * signal the host with ioq_signal() if the autoupdate feature is not + * used. + */ + ret = ioq_iter_init(ioq, &iter, ioq_idxtype_valid, 0); + BUG_ON(ret < 0); + + /* + * Seek to the tail of the valid index (which should be our first + * item, since the queue is brand-new) + */ + ret = ioq_iter_seek(&iter, ioq_seek_tail, 0, 0); + BUG_ON(ret < 0); + + /* + * Now populate each descriptor with an empty SKB and mark it valid + */ + while (!iter.desc->valid) { + rxdesc_alloc(iter.desc, priv->dev->mtu); + + /* + * This push operation will simultaneously advance the + * valid-head index and increment our position in the queue + * by one. + */ + ret = ioq_iter_push(&iter, 0); + BUG_ON(ret < 0); + } +} + +static void +rx_teardown(struct vbus_enet_priv *priv) +{ + struct ioq *ioq = priv->rxq.queue; + struct ioq_iterator iter; + int ret; + + ret = ioq_iter_init(ioq, &iter, ioq_idxtype_valid, 0); + BUG_ON(ret < 0); + + ret = ioq_iter_seek(&iter, ioq_seek_head, 0, 0); + BUG_ON(ret < 0); + + /* + * free each valid descriptor + */ + while (iter.desc->valid) { + struct sk_buff *skb = (struct sk_buff *)iter.desc->cookie; + + iter.desc->valid = 0; + wmb(); + + iter.desc->ptr = 0; + iter.desc->cookie = 0; + + ret = ioq_iter_pop(&iter, 0); + BUG_ON(ret < 0); + + dev_kfree_skb(skb); + } +} + +/* + * Open and close + */ + +static int +vbus_enet_open(struct net_device *dev) +{ + struct vbus_enet_priv *priv = netdev_priv(dev); + int ret; + + ret = devcall(priv, VENET_FUNC_LINKUP, NULL, 0); + BUG_ON(ret < 0); + + napi_enable(&priv->napi); + + return 0; +} + +static int +vbus_enet_stop(struct net_device *dev) +{ + struct vbus_enet_priv *priv = netdev_priv(dev); + int ret; + + napi_disable(&priv->napi); + + ret = devcall(priv, VENET_FUNC_LINKDOWN, NULL, 0); + BUG_ON(ret < 0); + + return 0; +} + +/* + * Configuration changes (passed on by ifconfig) + */ +static int +vbus_enet_config(struct net_device *dev, struct ifmap *map) +{ + if (dev->flags & IFF_UP) /* can't act on a running interface */ + return -EBUSY; + + /* Don't allow changing the I/O address */ + if (map->base_addr != dev->base_addr) { + printk(KERN_WARNING "vbus_enet: Can't change I/O address\n"); + return -EOPNOTSUPP; + } + + /* ignore other fields */ + return 0; +} + +static void +vbus_enet_schedule_rx(struct vbus_enet_priv *priv) +{ + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + + if (netif_rx_schedule_prep(&priv->napi)) { + /* Disable further interrupts */ + ioq_notify_disable(priv->rxq.queue, 0); + __netif_rx_schedule(&priv->napi); + } + + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int +vbus_enet_change_mtu(struct net_device *dev, int new_mtu) +{ + struct vbus_enet_priv *priv = netdev_priv(dev); + int ret; + + dev->mtu = new_mtu; + + /* + * FLUSHRX will cause the device to flush any outstanding + * RX buffers. They will appear to come in as 0 length + * packets which we can simply discard and replace with new_mtu + * buffers for the future. + */ + ret = devcall(priv, VENET_FUNC_FLUSHRX, NULL, 0); + BUG_ON(ret < 0); + + vbus_enet_schedule_rx(priv); + + return 0; +} + +/* + * The poll implementation. + */ +static int +vbus_enet_poll(struct napi_struct *napi, int budget) +{ + struct vbus_enet_priv *priv = napi_to_priv(napi); + int npackets = 0; + struct ioq_iterator iter; + int ret; + + PDEBUG("%lld: polling...\n", priv->vdev->id); + + /* We want to iterate on the head of the in-use index */ + ret = ioq_iter_init(priv->rxq.queue, &iter, ioq_idxtype_inuse, + IOQ_ITER_AUTOUPDATE); + BUG_ON(ret < 0); + + ret = ioq_iter_seek(&iter, ioq_seek_head, 0, 0); + BUG_ON(ret < 0); + + /* + * We stop if we have met the quota or there are no more packets. + * The EOM is indicated by finding a packet that is still owned by + * the south side + */ + while ((npackets < budget) && (!iter.desc->sown)) { + struct sk_buff *skb = (struct sk_buff *)iter.desc->cookie; + + if (iter.desc->len) { + skb_put(skb, iter.desc->len); + + /* Maintain stats */ + npackets++; + priv->dev->stats.rx_packets++; + priv->dev->stats.rx_bytes += iter.desc->len; + + /* Pass the buffer up to the stack */ + skb->dev = priv->dev; + skb->protocol = eth_type_trans(skb, priv->dev); + netif_receive_skb(skb); + + mb(); + } else + /* + * the device may send a zero-length packet when its + * flushing references on the ring. We can just drop + * these on the floor + */ + dev_kfree_skb(skb); + + /* Grab a new buffer to put in the ring */ + rxdesc_alloc(iter.desc, priv->dev->mtu); + + /* Advance the in-use tail */ + ret = ioq_iter_pop(&iter, 0); + BUG_ON(ret < 0); + } + + PDEBUG("%lld poll: %d packets received\n", priv->vdev->id, npackets); + + /* + * If we processed all packets, we're done; tell the kernel and + * reenable ints + */ + if (ioq_empty(priv->rxq.queue, ioq_idxtype_inuse)) { + netif_rx_complete(napi); + ioq_notify_enable(priv->rxq.queue, 0); + ret = 0; + } else + /* We couldn't process everything. */ + ret = 1; + + return ret; +} + +/* + * Transmit a packet (called by the kernel) + */ +static int +vbus_enet_tx_start(struct sk_buff *skb, struct net_device *dev) +{ + struct vbus_enet_priv *priv = netdev_priv(dev); + struct ioq_iterator iter; + int ret; + unsigned long flags; + + PDEBUG("%lld: sending %d bytes\n", priv->vdev->id, skb->len); + + spin_lock_irqsave(&priv->lock, flags); + + if (ioq_full(priv->txq.queue, ioq_idxtype_valid)) { + /* + * We must flow-control the kernel by disabling the + * queue + */ + spin_unlock_irqrestore(&priv->lock, flags); + netif_stop_queue(dev); + printk(KERN_ERR "VBUS_ENET: tx on full queue bug " \ + "on device %lld\n", priv->vdev->id); + return 1; + } + + /* + * We want to iterate on the tail of both the "inuse" and "valid" index + * so we specify the "both" index + */ + ret = ioq_iter_init(priv->txq.queue, &iter, ioq_idxtype_both, + IOQ_ITER_AUTOUPDATE); + BUG_ON(ret < 0); + + ret = ioq_iter_seek(&iter, ioq_seek_tail, 0, 0); + BUG_ON(ret < 0); + BUG_ON(iter.desc->sown); + + /* + * We simply put the skb right onto the ring. We will get an interrupt + * later when the data has been consumed and we can reap the pointers + * at that time + */ + iter.desc->cookie = (u64)skb; + iter.desc->len = (u64)skb->len; + iter.desc->ptr = (u64)__pa(skb->data); + iter.desc->valid = 1; + + priv->dev->stats.tx_packets++; + priv->dev->stats.tx_bytes += skb->len; + + /* + * This advances both indexes together implicitly, and then + * signals the south side to consume the packet + */ + ret = ioq_iter_push(&iter, 0); + BUG_ON(ret < 0); + + dev->trans_start = jiffies; /* save the timestamp */ + + if (ioq_full(priv->txq.queue, ioq_idxtype_valid)) { + /* + * If the queue is congested, we must flow-control the kernel + */ + PDEBUG("%lld: backpressure tx queue\n", priv->vdev->id); + netif_stop_queue(dev); + } + + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +/* + * reclaim any outstanding completed tx packets + * + * assumes priv->lock held + */ +static void +vbus_enet_tx_reap(struct vbus_enet_priv *priv, int force) +{ + struct ioq_iterator iter; + int ret; + + /* + * We want to iterate on the head of the valid index, but we + * do not want the iter_pop (below) to flip the ownership, so + * we set the NOFLIPOWNER option + */ + ret = ioq_iter_init(priv->txq.queue, &iter, ioq_idxtype_valid, + IOQ_ITER_NOFLIPOWNER); + BUG_ON(ret < 0); + + ret = ioq_iter_seek(&iter, ioq_seek_head, 0, 0); + BUG_ON(ret < 0); + + /* + * We are done once we find the first packet either invalid or still + * owned by the south-side + */ + while (iter.desc->valid && (!iter.desc->sown || force)) { + struct sk_buff *skb = (struct sk_buff *)iter.desc->cookie; + + PDEBUG("%lld: completed sending %d bytes\n", + priv->vdev->id, skb->len); + + /* Reset the descriptor */ + iter.desc->valid = 0; + + dev_kfree_skb(skb); + + /* Advance the valid-index head */ + ret = ioq_iter_pop(&iter, 0); + BUG_ON(ret < 0); + } + + /* + * If we were previously stopped due to flow control, restart the + * processing + */ + if (netif_queue_stopped(priv->dev) + && !ioq_full(priv->txq.queue, ioq_idxtype_valid)) { + PDEBUG("%lld: re-enabling tx queue\n", priv->vdev->id); + netif_wake_queue(priv->dev); + } +} + +static void +vbus_enet_timeout(struct net_device *dev) +{ + struct vbus_enet_priv *priv = netdev_priv(dev); + unsigned long flags; + + printk(KERN_DEBUG "VBUS_ENET %lld: Transmit timeout\n", priv->vdev->id); + + spin_lock_irqsave(&priv->lock, flags); + vbus_enet_tx_reap(priv, 0); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void +rx_isr(struct ioq_notifier *notifier) +{ + struct vbus_enet_priv *priv; + struct net_device *dev; + + priv = container_of(notifier, struct vbus_enet_priv, rxq.notifier); + dev = priv->dev; + + if (!ioq_empty(priv->rxq.queue, ioq_idxtype_inuse)) + vbus_enet_schedule_rx(priv); +} + +static void +deferred_tx_isr(unsigned long data) +{ + struct vbus_enet_priv *priv = (struct vbus_enet_priv *)data; + unsigned long flags; + + PDEBUG("deferred_tx_isr for %lld\n", priv->vdev->id); + + spin_lock_irqsave(&priv->lock, flags); + vbus_enet_tx_reap(priv, 0); + spin_unlock_irqrestore(&priv->lock, flags); + + ioq_notify_enable(priv->txq.queue, 0); +} + +static void +tx_isr(struct ioq_notifier *notifier) +{ + struct vbus_enet_priv *priv; + unsigned long flags; + + priv = container_of(notifier, struct vbus_enet_priv, txq.notifier); + + PDEBUG("tx_isr for %lld\n", priv->vdev->id); + + ioq_notify_disable(priv->txq.queue, 0); + tasklet_schedule(&priv->txtask); +} + +static const struct net_device_ops vbus_enet_netdev_ops = { + .ndo_open = vbus_enet_open, + .ndo_stop = vbus_enet_stop, + .ndo_set_config = vbus_enet_config, + .ndo_start_xmit = vbus_enet_tx_start, + .ndo_change_mtu = vbus_enet_change_mtu, + .ndo_tx_timeout = vbus_enet_timeout, +}; + +/* + * This is called whenever a new vbus_device_proxy is added to the vbus + * with the matching VENET_ID + */ +static int +vbus_enet_probe(struct vbus_device_proxy *vdev) +{ + struct net_device *dev; + struct vbus_enet_priv *priv; + int ret; + + printk(KERN_INFO "VBUS_ENET: Found new device at %lld\n", vdev->id); + + ret = vdev->ops->open(vdev, VENET_VERSION, 0); + if (ret < 0) + return ret; + + dev = alloc_etherdev(sizeof(struct vbus_enet_priv)); + if (!dev) + return -ENOMEM; + + priv = netdev_priv(dev); + + spin_lock_init(&priv->lock); + priv->dev = dev; + priv->vdev = vdev; + + tasklet_init(&priv->txtask, deferred_tx_isr, (unsigned long)priv); + + queue_init(priv, &priv->rxq, VENET_QUEUE_RX, rx_ringlen, rx_isr); + queue_init(priv, &priv->txq, VENET_QUEUE_TX, tx_ringlen, tx_isr); + + rx_setup(priv); + + ioq_notify_enable(priv->rxq.queue, 0); /* enable interrupts */ + ioq_notify_enable(priv->txq.queue, 0); + + dev->netdev_ops = &vbus_enet_netdev_ops; + dev->watchdog_timeo = 5 * HZ; + + netif_napi_add(dev, &priv->napi, vbus_enet_poll, napi_weight); + + ret = devcall(priv, VENET_FUNC_MACQUERY, priv->dev->dev_addr, ETH_ALEN); + if (ret < 0) { + printk(KERN_INFO "VENET: Error obtaining MAC address for " \ + "%lld\n", + priv->vdev->id); + goto out_free; + } + + dev->features |= NETIF_F_HIGHDMA; + + ret = register_netdev(dev); + if (ret < 0) { + printk(KERN_INFO "VENET: error %i registering device \"%s\"\n", + ret, dev->name); + goto out_free; + } + + vdev->priv = priv; + + return 0; + + out_free: + free_netdev(dev); + + return ret; +} + +static int +vbus_enet_remove(struct vbus_device_proxy *vdev) +{ + struct vbus_enet_priv *priv = (struct vbus_enet_priv *)vdev->priv; + struct vbus_device_proxy *dev = priv->vdev; + + unregister_netdev(priv->dev); + napi_disable(&priv->napi); + + rx_teardown(priv); + vbus_enet_tx_reap(priv, 1); + + ioq_put(priv->rxq.queue); + ioq_put(priv->txq.queue); + + dev->ops->close(dev, 0); + + free_netdev(priv->dev); + + return 0; +} + +/* + * Finally, the module stuff + */ + +static struct vbus_driver_ops vbus_enet_driver_ops = { + .probe = vbus_enet_probe, + .remove = vbus_enet_remove, +}; + +static struct vbus_driver vbus_enet_driver = { + .type = VENET_TYPE, + .owner = THIS_MODULE, + .ops = &vbus_enet_driver_ops, +}; + +static __init int +vbus_enet_init_module(void) +{ + printk(KERN_INFO "Virtual Ethernet: Copyright (C) 2009 Novell, Gregory Haskins\n"); + printk(KERN_DEBUG "VBUSENET: Using %d/%d queue depth\n", + rx_ringlen, tx_ringlen); + return vbus_driver_register(&vbus_enet_driver); +} + +static __exit void +vbus_enet_cleanup(void) +{ + vbus_driver_unregister(&vbus_enet_driver); +} + +module_init(vbus_enet_init_module); +module_exit(vbus_enet_cleanup); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/