Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 27 Feb 2002 22:08:19 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 27 Feb 2002 22:07:37 -0500 Received: from mother.ludd.luth.se ([130.240.16.3]:49630 "EHLO mother.ludd.luth.se") by vger.kernel.org with ESMTP id ; Wed, 27 Feb 2002 22:07:21 -0500 Date: Thu, 28 Feb 2002 04:07:18 +0100 (MET) From: texas To: Subject: Re: Dual P4 Xeon i860 system - lockups in 2.4 & no boot in 2.2 In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I'm sorry having to admit this but I had ACPI turned off in BIOS. Turned it back on and now hyperthreading seems to work and "top" gives me four processors! Damn that's sweet :-) I can't say anything about added performance though as that has to be tested during peak hours. With 15833.49 bogomips, it has to be good ;-) Only time can tell what happened to the random lockups though, hopefully they will go away as highmem were turned off and "resources controlled by" in BIOS were set to "manual" instead of "auto(ESCD)". Below is the boot messages when HT is working. Some strange messages like "no RSDP was found" and then "RSDP located at physical address c00f6bf0" are present as well as "init.c:148: bad pte 3fff3163" but none seem serious. Thanks, Johan Feb 28 02:17:50 db2 kernel: Linux version 2.4.18-rc4 (root@db2) (gcc version 2.95.3 20010315 (release)) #1 SMP Wed Feb 27 22:03:01 CET 2002 Feb 28 02:17:50 db2 kernel: BIOS-provided physical RAM map: Feb 28 02:17:50 db2 kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) Feb 28 02:17:50 db2 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Feb 28 02:17:50 db2 kernel: BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Feb 28 02:17:50 db2 kernel: BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Feb 28 02:17:50 db2 kernel: BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Feb 28 02:17:50 db2 kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Feb 28 02:17:50 db2 kernel: Warning only 896MB will be used. Feb 28 02:17:50 db2 kernel: Use a HIGHMEM enabled kernel. Feb 28 02:17:50 db2 kernel: found SMP MP-table at 000f5010 Feb 28 02:17:50 db2 kernel: hm, page 000f5000 reserved twice. Feb 28 02:17:50 db2 kernel: hm, page 000f6000 reserved twice. Feb 28 02:17:50 db2 kernel: hm, page 000f1000 reserved twice. Feb 28 02:17:50 db2 kernel: hm, page 000f2000 reserved twice. Feb 28 02:17:50 db2 kernel: On node 0 totalpages: 229376 Feb 28 02:17:50 db2 kernel: zone(0): 4096 pages. Feb 28 02:17:50 db2 kernel: zone(1): 225280 pages. Feb 28 02:17:50 db2 kernel: zone(2): 0 pages. Feb 28 02:17:50 db2 kernel: ACPI: Searched entire block, no RSDP was found. Feb 28 02:17:50 db2 kernel: ACPI: RSDP located at physical address c00f6bf0 Feb 28 02:17:50 db2 kernel: RSD PTR v0 [IntelR] Feb 28 02:17:50 db2 kernel: ACPI table found: RSDT v1 [IntelR AWRDACPI 16944.11825] Feb 28 02:17:50 db2 kernel: init.c:148: bad pte 3fff3163. Feb 28 02:17:50 db2 kernel: ACPI table found: FACP v1 [IntelR AWRDACPI 16944.11825] Feb 28 02:17:50 db2 kernel: init.c:148: bad pte 3fff3163. Feb 28 02:17:50 db2 kernel: ACPI table found: APIC v1 [IntelR AWRDACPI 16944.11825] Feb 28 02:17:50 db2 kernel: init.c:148: bad pte 3fff6163. Feb 28 02:17:50 db2 kernel: LAPIC (acpi_id[0x0000] id[0x0] enabled[1]) Feb 28 02:17:50 db2 kernel: CPU 0 (0x0000) enabledProcessor #0 Unknown CPU [15:2] APIC version 16 Feb 28 02:17:50 db2 kernel: Feb 28 02:17:50 db2 kernel: LAPIC (acpi_id[0x0001] id[0x1] enabled[1]) Feb 28 02:17:50 db2 kernel: CPU 1 (0x0100) enabledProcessor #1 Unknown CPU [15:2] APIC version 16 Feb 28 02:17:50 db2 kernel: Feb 28 02:17:50 db2 kernel: LAPIC (acpi_id[0x0002] id[0x2] enabled[1]) Feb 28 02:17:50 db2 kernel: CPU 2 (0x0200) enabledProcessor #2 Unknown CPU [15:2] APIC version 16 Feb 28 02:17:50 db2 kernel: Feb 28 02:17:50 db2 kernel: LAPIC (acpi_id[0x0003] id[0x3] enabled[1]) Feb 28 02:17:50 db2 kernel: CPU 3 (0x0300) enabledProcessor #3 Unknown CPU [15:2] APIC version 16 Feb 28 02:17:50 db2 kernel: Feb 28 02:17:50 db2 kernel: IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0]) Feb 28 02:17:50 db2 kernel: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x3]) Feb 28 02:17:50 db2 kernel: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) Feb 28 02:17:50 db2 kernel: 4 CPUs total Feb 28 02:17:50 db2 kernel: Local APIC address fee00000 Feb 28 02:17:50 db2 kernel: Enabling the CPU's according to the ACPI table Feb 28 02:17:50 db2 kernel: Intel MultiProcessor Specification v1.4 Feb 28 02:17:50 db2 kernel: Virtual Wire compatibility mode. Feb 28 02:17:50 db2 kernel: OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Feb 28 02:17:50 db2 kernel: I/O APIC #2 Version 17 at 0xFEC00000. Feb 28 02:17:50 db2 kernel: Processors: 4 Feb 28 02:17:50 db2 kernel: init.c:148: bad pte 3fff6163. Feb 28 02:17:50 db2 kernel: Kernel command line: auto BOOT_IMAGE=linux ro root=301 acpismp=force Feb 28 02:17:50 db2 kernel: Initializing CPU#0 Feb 28 02:17:50 db2 kernel: Detected 1982.583 MHz processor. Feb 28 02:17:50 db2 kernel: Console: colour VGA+ 80x25 Feb 28 02:17:50 db2 kernel: Calibrating delay loop... 3958.37 BogoMIPS Feb 28 02:17:50 db2 kernel: Memory: 901096k/917504k available (808k kernel code, 16024k reserved, 183k data, 212k init, 0k highmem) Feb 28 02:17:50 db2 kernel: Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes) Feb 28 02:17:50 db2 kernel: Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Feb 28 02:17:50 db2 kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Feb 28 02:17:50 db2 kernel: Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Feb 28 02:17:50 db2 kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) Feb 28 02:17:50 db2 kernel: CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 Feb 28 02:17:50 db2 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K Feb 28 02:17:50 db2 kernel: CPU: L2 cache: 512K Feb 28 02:17:50 db2 kernel: CPU: Physical Processor ID: 0 Feb 28 02:17:50 db2 kernel: CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Feb 28 02:17:50 db2 kernel: Intel machine check architecture supported. Feb 28 02:17:50 db2 kernel: Intel machine check reporting enabled on CPU#0. Feb 28 02:17:50 db2 kernel: CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 Feb 28 02:17:50 db2 kernel: CPU: Common caps: 3febfbff 00000000 00000000 00000000 Feb 28 02:17:50 db2 kernel: Enabling fast FPU save and restore... done. Feb 28 02:17:50 db2 kernel: Enabling unmasked SIMD FPU exception support... done. Feb 28 02:17:50 db2 kernel: Checking 'hlt' instruction... OK. Feb 28 02:17:50 db2 kernel: POSIX conformance testing by UNIFIX Feb 28 02:17:50 db2 kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) Feb 28 02:17:50 db2 kernel: mtrr: detected mtrr type: Intel Feb 28 02:17:50 db2 kernel: CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 Feb 28 02:17:50 db2 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K Feb 28 02:17:50 db2 kernel: CPU: L2 cache: 512K Feb 28 02:17:50 db2 kernel: CPU: Physical Processor ID: 0 Feb 28 02:17:50 db2 kernel: CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Feb 28 02:17:50 db2 kernel: Intel machine check reporting enabled on CPU#0. Feb 28 02:17:50 db2 kernel: CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 Feb 28 02:17:50 db2 kernel: CPU: Common caps: 3febfbff 00000000 00000000 00000000 Feb 28 02:17:50 db2 kernel: CPU0: Intel(R) XEON(TM) CPU 2.00GHz stepping 04 Feb 28 02:17:50 db2 kernel: per-CPU timeslice cutoff: 1463.19 usecs. Feb 28 02:17:50 db2 kernel: enabled ExtINT on CPU#0 Feb 28 02:17:50 db2 kernel: ESR value before enabling vector: 00000000 Feb 28 02:17:50 db2 kernel: ESR value after enabling vector: 00000000 Feb 28 02:17:51 db2 kernel: Booting processor 1/1 eip 2000 Feb 28 02:17:51 db2 kernel: Initializing CPU#1 Feb 28 02:17:51 db2 kernel: masked ExtINT on CPU#1 Feb 28 02:17:51 db2 kernel: ESR value before enabling vector: 00000000 Feb 28 02:17:51 db2 kernel: ESR value after enabling vector: 00000000 Feb 28 02:17:51 db2 kernel: Calibrating delay loop... 3958.37 BogoMIPS Feb 28 02:17:51 db2 kernel: CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 Feb 28 02:17:51 db2 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K Feb 28 02:17:51 db2 kernel: CPU: L2 cache: 512K Feb 28 02:17:51 db2 kernel: CPU: Physical Processor ID: 3 Feb 28 02:17:51 db2 kernel: CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Feb 28 02:17:51 db2 kernel: Intel machine check reporting enabled on CPU#1. Feb 28 02:17:51 db2 kernel: CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 Feb 28 02:17:51 db2 kernel: CPU: Common caps: 3febfbff 00000000 00000000 00000000 Feb 28 02:17:51 db2 kernel: CPU1: Intel(R) XEON(TM) CPU 2.00GHz stepping 04 Feb 28 02:17:51 db2 kernel: Booting processor 2/2 eip 2000 Feb 28 02:17:51 db2 kernel: Initializing CPU#2 Feb 28 02:17:51 db2 kernel: masked ExtINT on CPU#2 Feb 28 02:17:51 db2 kernel: ESR value before enabling vector: 00000000 Feb 28 02:17:51 db2 kernel: ESR value after enabling vector: 00000000 Feb 28 02:17:51 db2 kernel: Calibrating delay loop... 3958.37 BogoMIPS Feb 28 02:17:51 db2 kernel: CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 Feb 28 02:17:51 db2 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K Feb 28 02:17:51 db2 kernel: CPU: L2 cache: 512K Feb 28 02:17:51 db2 kernel: CPU: Physical Processor ID: 0 Feb 28 02:17:51 db2 kernel: CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Feb 28 02:17:51 db2 kernel: Intel machine check reporting enabled on CPU#2. Feb 28 02:17:51 db2 kernel: CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 Feb 28 02:17:51 db2 kernel: CPU: Common caps: 3febfbff 00000000 00000000 00000000 Feb 28 02:17:51 db2 kernel: CPU2: Intel(R) XEON(TM) CPU 2.00GHz stepping 04 Feb 28 02:17:51 db2 kernel: Booting processor 3/3 eip 2000 Feb 28 02:17:51 db2 kernel: Initializing CPU#3 Feb 28 02:17:51 db2 kernel: masked ExtINT on CPU#3 Feb 28 02:17:51 db2 kernel: ESR value before enabling vector: 00000000 Feb 28 02:17:51 db2 kernel: ESR value after enabling vector: 00000000 Feb 28 02:17:51 db2 kernel: Calibrating delay loop... 3958.37 BogoMIPS Feb 28 02:17:51 db2 kernel: CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 Feb 28 02:17:51 db2 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K Feb 28 02:17:51 db2 kernel: CPU: L2 cache: 512K Feb 28 02:17:51 db2 kernel: CPU: Physical Processor ID: 3 Feb 28 02:17:51 db2 kernel: CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Feb 28 02:17:51 db2 kernel: Intel machine check reporting enabled on CPU#3. Feb 28 02:17:51 db2 kernel: CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 Feb 28 02:17:51 db2 kernel: CPU: Common caps: 3febfbff 00000000 00000000 00000000 Feb 28 02:17:51 db2 kernel: CPU3: Intel(R) XEON(TM) CPU 2.00GHz stepping 04 Feb 28 02:17:51 db2 kernel: Total of 4 processors activated (15833.49 BogoMIPS). Feb 28 02:17:51 db2 kernel: cpu_sibling_map[0] = 2 Feb 28 02:17:51 db2 kernel: cpu_sibling_map[1] = 3 Feb 28 02:17:51 db2 kernel: cpu_sibling_map[2] = 0 Feb 28 02:17:51 db2 kernel: cpu_sibling_map[3] = 1 Feb 28 02:17:51 db2 kernel: ENABLING IO-APIC IRQs Feb 28 02:17:51 db2 kernel: BIOS bug, IO-APIC#0 ID 2 is already used!... Feb 28 02:17:51 db2 kernel: ... fixing up to 4. (tell your hw vendor) Feb 28 02:17:51 db2 kernel: ...changing IO-APIC physical APIC ID to 4 ... ok. Feb 28 02:17:51 db2 kernel: init IO_APIC IRQs Feb 28 02:17:51 db2 kernel: IO-APIC (apicid-pin) 4-0, 4-10, 4-11, 4-15, 4-17, 4-18, 4-20, 4-21, 4-22 not connected. Feb 28 02:17:51 db2 kernel: ..TIMER: vector=0x31 pin1=2 pin2=0 Feb 28 02:17:51 db2 kernel: number of MP IRQ sources: 18. Feb 28 02:17:51 db2 kernel: number of IO-APIC #4 registers: 24. Feb 28 02:17:51 db2 kernel: testing the IO APIC....................... Feb 28 02:17:51 db2 kernel: Feb 28 02:17:51 db2 kernel: IO APIC #4...... Feb 28 02:17:51 db2 kernel: .... register #00: 04000000 Feb 28 02:17:51 db2 kernel: ....... : physical APIC id: 04 Feb 28 02:17:51 db2 kernel: .... register #01: 00178020 Feb 28 02:17:51 db2 kernel: ....... : max redirection entries: 0017 Feb 28 02:17:51 db2 kernel: ....... : PRQ implemented: 1 Feb 28 02:17:51 db2 kernel: ....... : IO APIC version: 0020 Feb 28 02:17:51 db2 kernel: .... register #02: 00000000 Feb 28 02:17:51 db2 kernel: ....... : arbitration: 00 Feb 28 02:17:51 db2 kernel: .... IRQ redirection table: Feb 28 02:17:51 db2 kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: Feb 28 02:17:51 db2 kernel: 00 000 00 1 0 0 0 0 0 0 00 Feb 28 02:17:51 db2 kernel: 01 00F 0F 0 0 0 0 0 1 1 39 Feb 28 02:17:51 db2 kernel: 02 00F 0F 0 0 0 0 0 1 1 31 Feb 28 02:17:51 db2 kernel: 03 00F 0F 0 0 0 0 0 1 1 41 Feb 28 02:17:51 db2 kernel: 04 00F 0F 0 0 0 0 0 1 1 49 Feb 28 02:17:51 db2 kernel: 05 00F 0F 0 0 0 0 0 1 1 51 Feb 28 02:17:51 db2 kernel: 06 00F 0F 0 0 0 0 0 1 1 59 Feb 28 02:17:51 db2 kernel: 07 00F 0F 0 0 0 0 0 1 1 61 Feb 28 02:17:51 db2 kernel: 08 00F 0F 0 0 0 0 0 1 1 69 Feb 28 02:17:51 db2 kernel: 09 00F 0F 0 0 0 0 0 1 1 71 Feb 28 02:17:51 db2 kernel: 0a 000 00 1 0 0 0 0 0 0 00 Feb 28 02:17:51 db2 kernel: 0b 000 00 1 0 0 0 0 0 0 00 Feb 28 02:17:51 db2 kernel: 0c 00F 0F 0 0 0 0 0 1 1 79 Feb 28 02:17:51 db2 kernel: 0d 00F 0F 0 0 0 0 0 1 1 81 Feb 28 02:17:51 db2 kernel: 0e 00F 0F 0 0 0 0 0 1 1 89 Feb 28 02:17:51 db2 kernel: 0f 000 00 1 0 0 0 0 0 0 00 Feb 28 02:17:51 db2 kernel: 10 00F 0F 1 1 0 1 0 1 1 91 Feb 28 02:17:51 db2 kernel: 11 000 00 1 0 0 0 0 0 0 00 Feb 28 02:17:51 db2 kernel: 12 000 00 1 0 0 0 0 0 0 00 Feb 28 02:17:51 db2 kernel: 13 00F 0F 1 1 0 1 0 1 1 99 Feb 28 02:17:51 db2 kernel: 14 000 00 1 0 0 0 0 0 0 00 Feb 28 02:17:51 db2 kernel: 15 000 00 1 0 0 0 0 0 0 00 Feb 28 02:17:51 db2 kernel: 16 000 00 1 0 0 0 0 0 0 00 Feb 28 02:17:51 db2 kernel: 17 00F 0F 1 1 0 1 0 1 1 A1 Feb 28 02:17:51 db2 kernel: IRQ to pin mappings: Feb 28 02:17:51 db2 kernel: IRQ0 -> 0:2 Feb 28 02:17:51 db2 kernel: IRQ1 -> 0:1 Feb 28 02:17:51 db2 kernel: IRQ3 -> 0:3 Feb 28 02:17:51 db2 kernel: IRQ4 -> 0:4 Feb 28 02:17:51 db2 kernel: IRQ5 -> 0:5 Feb 28 02:17:51 db2 kernel: IRQ6 -> 0:6 Feb 28 02:17:51 db2 kernel: IRQ7 -> 0:7 Feb 28 02:17:51 db2 kernel: IRQ8 -> 0:8 Feb 28 02:17:51 db2 kernel: IRQ9 -> 0:9 Feb 28 02:17:51 db2 kernel: IRQ12 -> 0:12 Feb 28 02:17:51 db2 kernel: IRQ13 -> 0:13 Feb 28 02:17:51 db2 kernel: IRQ14 -> 0:14 Feb 28 02:17:51 db2 kernel: IRQ16 -> 0:16 Feb 28 02:17:51 db2 kernel: IRQ19 -> 0:19 Feb 28 02:17:51 db2 kernel: IRQ23 -> 0:23 Feb 28 02:17:51 db2 kernel: .................................... done. Feb 28 02:17:51 db2 kernel: Using local APIC timer interrupts. Feb 28 02:17:51 db2 kernel: calibrating APIC timer ... Feb 28 02:17:51 db2 kernel: ..... CPU clock speed is 1982.5248 MHz. Feb 28 02:17:51 db2 kernel: ..... host bus clock speed is 99.1260 MHz. Feb 28 02:17:51 db2 kernel: cpu: 0, clocks: 991260, slice: 198252 Feb 28 02:17:51 db2 kernel: CPU0 Feb 28 02:17:51 db2 kernel: cpu: 2, clocks: 991260, slice: 198252 Feb 28 02:17:51 db2 kernel: cpu: 1, clocks: 991260, slice: 198252 Feb 28 02:17:51 db2 kernel: cpu: 3, clocks: 991260, slice: 198252 Feb 28 02:17:51 db2 kernel: CPU1 Feb 28 02:17:51 db2 kernel: CPU2 Feb 28 02:17:51 db2 kernel: CPU3 Feb 28 02:17:51 db2 kernel: checking TSC synchronization across CPUs: passed. Feb 28 02:17:51 db2 kernel: Waiting on wait_init_idle (map = 0xe) Feb 28 02:17:51 db2 kernel: All processors have done init_idle Feb 28 02:17:51 db2 kernel: mtrr: your CPUs had inconsistent fixed MTRR settings Feb 28 02:17:51 db2 kernel: mtrr: probably your BIOS does not setup all CPUs Feb 28 02:17:51 db2 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=4 Feb 28 02:17:51 db2 kernel: PCI: Using configuration type 1 Feb 28 02:17:51 db2 kernel: PCI: Probing PCI hardware Feb 28 02:17:51 db2 kernel: Unknown bridge resource 0: assuming transparent Feb 28 02:17:51 db2 kernel: Unknown bridge resource 1: assuming transparent Feb 28 02:17:51 db2 kernel: Unknown bridge resource 2: assuming transparent Feb 28 02:17:51 db2 kernel: Unknown bridge resource 0: assuming transparent Feb 28 02:17:51 db2 kernel: Unknown bridge resource 2: assuming transparent Feb 28 02:17:51 db2 kernel: Unknown bridge resource 0: assuming transparent Feb 28 02:17:52 db2 kernel: Unknown bridge resource 2: assuming transparent Feb 28 02:17:52 db2 kernel: Unknown bridge resource 2: assuming transparent Feb 28 02:17:52 db2 kernel: PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 Feb 28 02:17:52 db2 kernel: PCI->APIC IRQ transform: (B0,I31,P1) -> 19 Feb 28 02:17:52 db2 kernel: PCI->APIC IRQ transform: (B4,I3,P0) -> 19 Feb 28 02:17:52 db2 kernel: PCI->APIC IRQ transform: (B4,I4,P0) -> 16 Feb 28 02:17:52 db2 kernel: Linux NET4.0 for Linux 2.4 Feb 28 02:17:52 db2 kernel: Based upon Swansea University Computer Society NET3.039 Feb 28 02:17:52 db2 kernel: Initializing RT netlink socket Feb 28 02:17:52 db2 kernel: Starting kswapd Feb 28 02:17:52 db2 kernel: Real Time Clock Driver v1.10e Feb 28 02:17:52 db2 kernel: block: 128 slots per queue, batch=32 Feb 28 02:17:52 db2 kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31 Feb 28 02:17:52 db2 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Feb 28 02:17:52 db2 kernel: PIIX4: IDE controller on PCI bus 00 dev f9 Feb 28 02:17:52 db2 kernel: PIIX4: chipset revision 4 Feb 28 02:17:52 db2 kernel: PIIX4: not 100%% native mode: will probe irqs later Feb 28 02:17:52 db2 kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio Feb 28 02:17:52 db2 kernel: hda: WDC WD1000JB-32CWE0, ATA DISK drive Feb 28 02:17:52 db2 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Feb 28 02:17:52 db2 kernel: hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=12161/255/63, UDMA(100) Feb 28 02:17:52 db2 kernel: Partition check: Feb 28 02:17:52 db2 kernel: hda: hda1 hda2 hda3 hda4 Feb 28 02:17:52 db2 kernel: Floppy drive(s): fd0 is 1.44M Feb 28 02:17:52 db2 kernel: FDC 0 is a post-1991 82077 Feb 28 02:17:52 db2 kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html Feb 28 02:17:52 db2 kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others Feb 28 02:17:52 db2 kernel: eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:48:21:B5:1A, IRQ 16. Feb 28 02:17:52 db2 kernel: Board assembly 000000-000, Physical connectors present: RJ45 Feb 28 02:17:52 db2 kernel: Primary interface chip i82555 PHY #1. Feb 28 02:17:52 db2 kernel: General self-test: passed. Feb 28 02:17:52 db2 kernel: Serial sub-system self-test: passed. Feb 28 02:17:52 db2 kernel: Internal registers self-test: passed. Feb 28 02:17:52 db2 kernel: ROM checksum self-test: passed (0x04f4518b). Feb 28 02:17:52 db2 kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Feb 28 02:17:52 db2 kernel: IP Protocols: ICMP, UDP, TCP Feb 28 02:17:52 db2 kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes Feb 28 02:17:52 db2 kernel: TCP: Hash tables configured (established 262144 bind 65536) Feb 28 02:17:52 db2 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Feb 28 02:17:52 db2 kernel: VFS: Mounted root (ext2 filesystem) readonly. Feb 28 02:17:52 db2 kernel: Freeing unused kernel memory: 212k freed Feb 28 02:17:52 db2 kernel: Adding Swap: 104416k swap-space (priority -1) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/