Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760100AbZDQPAh (ORCPT ); Fri, 17 Apr 2009 11:00:37 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1758934AbZDQPA2 (ORCPT ); Fri, 17 Apr 2009 11:00:28 -0400 Received: from mail-ew0-f176.google.com ([209.85.219.176]:43654 "EHLO mail-ew0-f176.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753583AbZDQPAY (ORCPT ); Fri, 17 Apr 2009 11:00:24 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=subject:from:to:content-type:date:message-id:mime-version:x-mailer; b=HkZK0CEfaPNIItozvxURq2jfvbJelGIWzId6xBAgiEBOjdYTweEnL1snICw8tCeuzk nUm0uJ4lbO3PSiweBvpwwoKf7ZflBF+IYFeq5W9Ww7mpPVA2jsWhyAE+cAXAhs73/OqR U5mY9iSe9Q2adAGGUEky0VNKA3psp3nc24eB0= Subject: 2.6.29.1 sdhci: irq 19: nobody cared From: Alessandro Bono To: sdhci-devel@list.drzeus.cx, linux-kernel Content-Type: multipart/mixed; boundary="=-HSaFkWIgE8JUGtwOuwxQ" Date: Fri, 17 Apr 2009 17:00:18 +0200 Message-Id: <1239980418.6220.15.camel@champagne> Mime-Version: 1.0 X-Mailer: Evolution 2.24.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 57241 Lines: 944 --=-HSaFkWIgE8JUGtwOuwxQ Content-Type: text/plain Content-Transfer-Encoding: 7bit Hi This is a bug that occur from time to time on my (unsed) sdhci card drive this is with kernel 2.6.29.1 (not a regression, I had the same problem with older kernel) [ 2885.888003] irq 19: nobody cared (try booting with the "irqpoll" option) [ 2885.888014] Pid: 0, comm: swapper Not tainted 2.6.29.1 #1 [ 2885.888019] Call Trace: [ 2885.888023] [] __report_bad_irq+0x38/0x87 [ 2885.888045] [] note_interrupt+0x118/0x182 [ 2885.888053] [] handle_fasteoi_irq+0xa1/0xc5 [ 2885.888062] [] do_IRQ+0x70/0xe7 [ 2885.888069] [] ret_from_intr+0x0/0xa [ 2885.888073] [] ? notifier_call_chain +0x33/0x5b [ 2885.888136] [] ? acpi_idle_enter_simple +0x186/0x1f8 [processor] [ 2885.888159] [] ? acpi_idle_enter_simple +0x17c/0x1f8 [processor] [ 2885.888169] [] ? cpuidle_idle_call+0x8c/0xc6 [ 2885.888176] [] ? cpu_idle+0x52/0x93 [ 2885.888184] [] ? rest_init+0x61/0x63 [ 2885.888189] handlers: [ 2885.888192] [] (sdhci_irq+0x0/0x49a [sdhci]) [ 2885.888208] Disabling IRQ #19 as you can see there is a lot of interrupts on mmc0 but seems strange because I don't use this drive at all cat /proc/interrupts CPU0 CPU1 0: 320163 361871 IO-APIC-edge timer 1: 997 1017 IO-APIC-edge i8042 7: 0 0 IO-APIC-edge parport0 9: 3427 205 IO-APIC-fasteoi acpi 12: 920 876 IO-APIC-edge i8042 14: 43038 224 IO-APIC-edge ata_piix 15: 0 0 IO-APIC-edge ata_piix 16: 34787 50 IO-APIC-fasteoi uhci_hcd:usb2, yenta 17: 742 735 IO-APIC-fasteoi uhci_hcd:usb4, yenta, HDA Intel, HDA Intel 18: 2 2 IO-APIC-fasteoi ohci1394, ehci_hcd:usb1, uhci_hcd:usb7 19: 5399854 147 IO-APIC-fasteoi mmc0 20: 12 12 IO-APIC-fasteoi ehci_hcd:usb3, uhci_hcd:usb5 22: 0 0 IO-APIC-fasteoi uhci_hcd:usb6 28: 57246 12 PCI-MSI-edge eth0 29: 26003 21615 PCI-MSI-edge ahci 30: 922 722 PCI-MSI-edge iwlagn NMI: 0 0 Non-maskable interrupts LOC: 235843 241312 Local timer interrupts RES: 58369 76238 Rescheduling interrupts CAL: 67 65 Function call interrupts TLB: 3679 4198 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts SPU: 0 0 Spurious interrupts ERR: 0 MIS: 0 from dmesg [ 9.220049] ricoh-mmc: Ricoh MMC Controller disabling driver [ 9.220054] ricoh-mmc: Copyright(c) Philip Langdale [ 9.258786] sdhci: Secure Digital Host Controller Interface driver [ 9.258788] sdhci: Copyright(c) Pierre Ossman [ 9.329406] ricoh-mmc: Ricoh MMC controller found at 0000:02:06.4 [1180:0843] (rev 10) [ 9.329424] ricoh-mmc: Controller is now disabled. [ 9.329463] sdhci-pci 0000:02:06.3: SDHCI controller found [1180:0822] (rev 20) [ 9.329480] sdhci-pci 0000:02:06.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 9.331556] Registered led device: mmc0:: [ 9.332608] mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO dmesg attached tell me if you need other info thanks -- Cordiali Saluti Alessandro Bono --=-HSaFkWIgE8JUGtwOuwxQ Content-Disposition: attachment; filename="dmesg-2.6.29.1" Content-Type: text/plain; name="dmesg-2.6.29.1"; charset="UTF-8" Content-Transfer-Encoding: 7bit [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.29.1 (root@champagne) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP Fri Apr 3 09:23:25 CEST 2009 [ 0.000000] Command line: root=UUID=0a96113a-5259-480a-abac-a27a7f9ae544 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable) [ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffc5400 (reserved) [ 0.000000] BIOS-e820: 00000000bffc5400 - 00000000bffe7fb8 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe7fb8 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x100000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x100000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffb0000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bffb0000 page 4k [ 0.000000] kernel direct mapping tables up to bffb0000 @ 8000-d000 [ 0.000000] last_map_addr: bffb0000 end: bffb0000 [ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000 [ 0.000000] 0100000000 - 013c000000 page 2M [ 0.000000] kernel direct mapping tables up to 13c000000 @ b000-11000 [ 0.000000] last_map_addr: 13c000000 end: 13c000000 [ 0.000000] RAMDISK: 379f8000 - 37fef16a [ 0.000000] ACPI: RSDP 000F7D10, 0024 (r2 HP ) [ 0.000000] ACPI: XSDT BFFC81CC, 0084 (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: FACP BFFC8084, 00F4 (r4 HP 30C5 3 HP 1) [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT BFFC8544, 12EAD (r1 HP 8510x 10000 MSFT 3000001) [ 0.000000] ACPI: FACS BFFE7D80, 0040 [ 0.000000] ACPI: SLIC BFFC8250, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: HPET BFFC83C8, 0038 (r1 HP 30C5 1 HP 1) [ 0.000000] ACPI: APIC BFFC8400, 0068 (r1 HP 30C5 1 HP 1) [ 0.000000] ACPI: MCFG BFFC8468, 003C (r1 HP 30C5 1 HP 1) [ 0.000000] ACPI: TCPA BFFC84A4, 0032 (r2 HP 30C5 1 HP 1) [ 0.000000] ACPI: ASF! BFFC84D8, 0069 (r16 HP CHIMAYU 1 HP 0) [ 0.000000] ACPI: SSDT BFFDB3F1, 0328 (r1 HP HPQSAT 1 MSFT 3000001) [ 0.000000] ACPI: SSDT BFFDB719, 017C (r1 HP HPQMRM 1 MSFT 3000001) [ 0.000000] ACPI: SSDT BFFDC29D, 025F (r1 HP Cpu0Tst 3000 INTL 20060317) [ 0.000000] ACPI: SSDT BFFDC4FC, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317) [ 0.000000] ACPI: SSDT BFFDC5A2, 04D7 (r1 HP CpuPm 3000 INTL 20060317) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 013c000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 000067e94c] TEXT DATA BSS ==> [0000200000 - 000067e94c] [ 0.000000] #3 [00379f8000 - 0037fef16a] RAMDISK ==> [00379f8000 - 0037fef16a] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #6 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] [ 0.000000] [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0013c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bffb0 [ 0.000000] 0: 0x00100000 -> 0x0013c000 [ 0.000000] On node 0 totalpages: 1032015 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1253 pages reserved [ 0.000000] DMA zone: 2690 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767976 pages, LIFO batch:31 [ 0.000000] Normal zone: 3360 pages used for memmap [ 0.000000] Normal zone: 242400 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bffb0000 - 00000000bffc5000 [ 0.000000] PM: Registered nosave memory: 00000000bffc5000 - 00000000bffc6000 [ 0.000000] PM: Registered nosave memory: 00000000bffc6000 - 00000000bffe7000 [ 0.000000] PM: Registered nosave memory: 00000000bffe7000 - 00000000bffe8000 [ 0.000000] PM: Registered nosave memory: 00000000bffe8000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed9a000 [ 0.000000] PM: Registered nosave memory: 00000000fed9a000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fedc0000 [ 0.000000] PM: Registered nosave memory: 00000000fedc0000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000) [ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1013066 [ 0.000000] Kernel command line: root=UUID=0a96113a-5259-480a-abac-a27a7f9ae544 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] Experimental hierarchical RCU implementation. [ 0.000000] Experimental hierarchical RCU init done. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2394.566 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] allocated 52428800 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.004000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.004000] Memory: 3921096k/5177344k available (2197k kernel code, 1049284k absent, 206020k reserved, 1346k data, 312k init) [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.13 BogoMIPS (lpj=9578264) [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys devices [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] [ds] using Core 2/Atom configuration [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] CPU0: Thermal monitoring handled by SMI [ 0.004000] using mwait in idle threads. [ 0.004000] ACPI: Core revision 20081204 [ 0.024064] Setting APIC routing to flat [ 0.024434] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066317] CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b [ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4787.95 BogoMIPS (lpj=9575919) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] [ds] using Core 2/Atom configuration [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.153294] CPU1: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b [ 0.153314] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.156028] Brought up 2 CPUs [ 0.156030] Total of 2 processors activated (9577.09 BogoMIPS). [ 0.156077] CPU0 attaching sched-domain: [ 0.156079] domain 0: span 0-1 level MC [ 0.156081] groups: 0 1 [ 0.156085] CPU1 attaching sched-domain: [ 0.156086] domain 0: span 0-1 level MC [ 0.156088] groups: 1 0 [ 0.156152] net_namespace: 1792 bytes [ 0.156152] NET: Registered protocol family 16 [ 0.156152] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.156152] ACPI: bus type pci registered [ 0.156152] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.156152] PCI: Not using MMCONFIG. [ 0.156152] PCI: Using configuration type 1 for base access [ 0.156152] bio: create slab at 0 [ 0.160044] ACPI: EC: Look up EC in DSDT [ 0.188019] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.212311] ACPI: Interpreter enabled [ 0.212314] ACPI: (supports S0 S3 S4 S5) [ 0.212328] ACPI: Using IOAPIC for interrupt routing [ 0.212391] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.222774] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources [ 0.225062] PCI: Using MMCONFIG at f8000000 - fbffffff [ 0.236440] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.236440] ACPI: EC: driver started in interrupt mode [ 0.240091] ACPI: No dock devices found. [ 0.240101] ACPI: PCI Root Bridge [C003] (0000:00) [ 0.240125] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.240125] pci 0000:00:01.0: PME# disabled [ 0.240125] pci 0000:00:03.0: reg 10 64bit mmio: [0xe4500000-0xe450000f] [ 0.240149] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.240151] pci 0000:00:03.0: PME# disabled [ 0.240178] pci 0000:00:03.2: reg 10 io port: [0x5000-0x5007] [ 0.240182] pci 0000:00:03.2: reg 14 io port: [0x5008-0x500b] [ 0.240187] pci 0000:00:03.2: reg 18 io port: [0x5010-0x5017] [ 0.240191] pci 0000:00:03.2: reg 1c io port: [0x5018-0x501b] [ 0.240195] pci 0000:00:03.2: reg 20 io port: [0x5020-0x502f] [ 0.240239] pci 0000:00:03.3: reg 10 io port: [0x5030-0x5037] [ 0.240244] pci 0000:00:03.3: reg 14 32bit mmio: [0xe4501000-0xe4501fff] [ 0.240349] pci 0000:00:19.0: reg 10 32bit mmio: [0xe4520000-0xe453ffff] [ 0.240357] pci 0000:00:19.0: reg 14 32bit mmio: [0xe4540000-0xe4540fff] [ 0.240364] pci 0000:00:19.0: reg 18 io port: [0x5040-0x505f] [ 0.240414] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.240418] pci 0000:00:19.0: PME# disabled [ 0.240468] pci 0000:00:1a.0: reg 20 io port: [0x5060-0x507f] [ 0.240530] pci 0000:00:1a.1: reg 20 io port: [0x5080-0x509f] [ 0.240598] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe4541000-0xe45413ff] [ 0.240660] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.240664] pci 0000:00:1a.7: PME# disabled [ 0.240716] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe4544000-0xe4547fff] [ 0.240775] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.240779] pci 0000:00:1b.0: PME# disabled [ 0.240860] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.240864] pci 0000:00:1c.0: PME# disabled [ 0.240948] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.240952] pci 0000:00:1c.1: PME# disabled [ 0.241040] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.241044] pci 0000:00:1c.4: PME# disabled [ 0.241104] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf] [ 0.241168] pci 0000:00:1d.1: reg 20 io port: [0x50c0-0x50df] [ 0.241230] pci 0000:00:1d.2: reg 20 io port: [0x50e0-0x50ff] [ 0.241298] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe4548000-0xe45483ff] [ 0.241359] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.241364] pci 0000:00:1d.7: PME# disabled [ 0.241528] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.241532] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO [ 0.241536] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) [ 0.241543] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007) [ 0.241593] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.241600] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.241608] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.241615] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.241622] pci 0000:00:1f.1: reg 20 io port: [0x5100-0x510f] [ 0.241692] pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7] [ 0.241699] pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7] [ 0.241706] pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377] [ 0.241713] pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577] [ 0.241721] pci 0000:00:1f.2: reg 20 io port: [0x5140-0x515f] [ 0.241728] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe4549000-0xe45497ff] [ 0.241769] pci 0000:00:1f.2: PME# supported from D3hot [ 0.241773] pci 0000:00:1f.2: PME# disabled [ 0.241825] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] [ 0.241833] pci 0000:01:00.0: reg 14 io port: [0x4000-0x40ff] [ 0.241839] pci 0000:01:00.0: reg 18 32bit mmio: [0xe4400000-0xe440ffff] [ 0.241862] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.241890] pci 0000:01:00.0: supports D1 D2 [ 0.241932] pci 0000:01:00.1: reg 10 32bit mmio: [0xe4410000-0xe4413fff] [ 0.241992] pci 0000:01:00.1: supports D1 D2 [ 0.242057] pci 0000:00:01.0: bridge io port: [0x4000-0x4fff] [ 0.242060] pci 0000:00:01.0: bridge 32bit mmio: [0xe4400000-0xe44fffff] [ 0.242063] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.242254] pci 0000:10:00.0: reg 10 64bit mmio: [0xe4000000-0xe4001fff] [ 0.242381] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 0.242394] pci 0000:10:00.0: PME# disabled [ 0.242482] pci 0000:00:1c.1: bridge 32bit mmio: [0xe4000000-0xe40fffff] [ 0.242544] pci 0000:00:1c.4: bridge io port: [0x2000-0x3fff] [ 0.242549] pci 0000:00:1c.4: bridge 32bit mmio: [0xe0000000-0xe3ffffff] [ 0.242606] pci 0000:02:06.0: reg 10 32bit mmio: [0xe4100000-0xe4100fff] [ 0.242628] pci 0000:02:06.0: supports D1 D2 [ 0.242629] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242634] pci 0000:02:06.0: PME# disabled [ 0.242673] pci 0000:02:06.1: reg 10 32bit mmio: [0xe4101000-0xe4101fff] [ 0.242697] pci 0000:02:06.1: supports D1 D2 [ 0.242698] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242703] pci 0000:02:06.1: PME# disabled [ 0.242742] pci 0000:02:06.2: reg 10 32bit mmio: [0xe4102000-0xe41027ff] [ 0.242801] pci 0000:02:06.2: supports D1 D2 [ 0.242802] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242807] pci 0000:02:06.2: PME# disabled [ 0.242847] pci 0000:02:06.3: reg 10 32bit mmio: [0xe4103000-0xe41030ff] [ 0.242904] pci 0000:02:06.3: supports D1 D2 [ 0.242906] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242910] pci 0000:02:06.3: PME# disabled [ 0.242951] pci 0000:02:06.4: reg 10 32bit mmio: [0xe4104000-0xe41040ff] [ 0.243010] pci 0000:02:06.4: supports D1 D2 [ 0.243011] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.243016] pci 0000:02:06.4: PME# disabled [ 0.243070] pci 0000:00:1e.0: transparent bridge [ 0.243077] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4100000-0xe43fffff] [ 0.243146] pci_bus 0000:00: on NUMA node 0 [ 0.243151] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] [ 0.243412] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C096._PRT] [ 0.243482] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT] [ 0.243591] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT] [ 0.243672] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT] [ 0.243755] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT] [ 0.298307] ACPI: PCI Interrupt Link [C12D] (IRQs *10 11) [ 0.298307] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11) [ 0.298307] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11) [ 0.298307] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *5 [ 0.300020] ACPI: PCI Interrupt Link [C140] (IRQs *10 11) [ 0.300259] ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *5 [ 0.300497] ACPI: PCI Interrupt Link [C142] (IRQs 10 *11) [ 0.300607] ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20081204] [ 0.300728] ACPI: Power Resource [C238] (on) [ 0.300728] ACPI: Power Resource [C254] (on) [ 0.300728] ACPI: Power Resource [C17C] (off) [ 0.300728] ACPI: Power Resource [C363] (off) [ 0.300728] ACPI: Power Resource [C366] (off) [ 0.300728] ACPI: Power Resource [C367] (off) [ 0.300754] ACPI: Power Resource [C368] (off) [ 0.300863] ACPI: Power Resource [C369] (off) [ 0.300914] ACPI: Power Resource [C36A] (off) [ 0.301023] ACPI: Power Resource [C383] (off) [ 0.301132] ACPI: Power Resource [C384] (off) [ 0.301240] ACPI: Power Resource [C385] (off) [ 0.301349] ACPI: Power Resource [C386] (off) [ 0.301458] ACPI: Power Resource [C387] (off) [ 0.301469] PCI: Using ACPI for IRQ routing [ 0.312014] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.312017] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.328004] pnp: PnP ACPI init [ 0.328010] ACPI: bus type pnp registered [ 0.338988] pnp: PnP ACPI: found 15 devices [ 0.338990] ACPI: ACPI bus type pnp unregistered [ 0.338997] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.338999] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.339001] system 00:00: iomem range 0x100000-0xbfffffff could not be reserved [ 0.339008] system 00:0b: ioport range 0x500-0x55f has been reserved [ 0.339010] system 00:0b: ioport range 0x800-0x80f has been reserved [ 0.339013] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.339015] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved [ 0.339019] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved [ 0.339021] system 00:0d: ioport range 0x1000-0x107f has been reserved [ 0.339023] system 00:0d: ioport range 0x1100-0x113f has been reserved [ 0.339025] system 00:0d: ioport range 0x1200-0x121f has been reserved [ 0.339028] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.339030] system 00:0d: iomem range 0xfec00000-0xfec000ff has been reserved [ 0.339032] system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.339034] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.339036] system 00:0d: iomem range 0xfed90000-0xfed99fff has been reserved [ 0.339040] system 00:0e: iomem range 0xcf400-0xcffff has been reserved [ 0.339042] system 00:0e: iomem range 0xfeda0000-0xfedbffff has been reserved [ 0.339044] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.343889] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.343891] pci 0000:00:01.0: IO window: 0x4000-0x4fff [ 0.343895] pci 0000:00:01.0: MEM window: 0xe4400000-0xe44fffff [ 0.343898] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.343902] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 0.343903] pci 0000:00:1c.0: IO window: disabled [ 0.343909] pci 0000:00:1c.0: MEM window: disabled [ 0.343913] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.343920] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10 [ 0.343921] pci 0000:00:1c.1: IO window: disabled [ 0.343927] pci 0000:00:1c.1: MEM window: 0xe4000000-0xe40fffff [ 0.343931] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.343938] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28 [ 0.343941] pci 0000:00:1c.4: IO window: 0x2000-0x3fff [ 0.343947] pci 0000:00:1c.4: MEM window: 0xe0000000-0xe3ffffff [ 0.343951] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.343962] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 [ 0.343963] pci 0000:02:06.0: IO window: 0x006000-0x0060ff [ 0.343968] pci 0000:02:06.0: IO window: 0x006400-0x0064ff [ 0.343972] pci 0000:02:06.0: PREFETCH window: 0xc4000000-0xc7ffffff [ 0.343977] pci 0000:02:06.0: MEM window: 0xcc000000-0xcfffffff [ 0.343981] pci 0000:02:06.1: CardBus bridge, secondary bus 0000:04 [ 0.343983] pci 0000:02:06.1: IO window: 0x006800-0x0068ff [ 0.343987] pci 0000:02:06.1: IO window: 0x006c00-0x006cff [ 0.343999] pci 0000:02:06.1: PREFETCH window: 0xc8000000-0xcbffffff [ 0.344004] pci 0000:02:06.1: MEM window: 0xe8000000-0xebffffff [ 0.344008] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.344011] pci 0000:00:1e.0: IO window: 0x6000-0x6fff [ 0.344017] pci 0000:00:1e.0: MEM window: 0xe4100000-0xe43fffff [ 0.344021] pci 0000:00:1e.0: PREFETCH window: 0x000000c4000000-0x000000cbffffff [ 0.344034] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.344037] pci 0000:00:01.0: setting latency timer to 64 [ 0.344045] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.344049] pci 0000:00:1c.0: setting latency timer to 64 [ 0.344058] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.344062] pci 0000:00:1c.1: setting latency timer to 64 [ 0.344070] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.344074] pci 0000:00:1c.4: setting latency timer to 64 [ 0.344082] pci 0000:00:1e.0: setting latency timer to 64 [ 0.344090] pci 0000:02:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.344100] pci 0000:02:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.344105] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.344107] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.344109] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] [ 0.344111] pci_bus 0000:01: resource 1 mem: [0xe4400000-0xe44fffff] [ 0.344113] pci_bus 0000:01: resource 2 mem: [0xd0000000-0xdfffffff] [ 0.344114] pci_bus 0000:01: resource 3 mem: [0x0-0x0] [ 0.344116] pci_bus 0000:08: resource 0 mem: [0x0-0x0] [ 0.344118] pci_bus 0000:08: resource 1 mem: [0x0-0x0] [ 0.344119] pci_bus 0000:08: resource 2 mem: [0x0-0x0] [ 0.344120] pci_bus 0000:08: resource 3 mem: [0x0-0x0] [ 0.344122] pci_bus 0000:10: resource 0 mem: [0x0-0x0] [ 0.344124] pci_bus 0000:10: resource 1 mem: [0xe4000000-0xe40fffff] [ 0.344125] pci_bus 0000:10: resource 2 mem: [0x0-0x0] [ 0.344127] pci_bus 0000:10: resource 3 mem: [0x0-0x0] [ 0.344128] pci_bus 0000:28: resource 0 io: [0x2000-0x3fff] [ 0.344130] pci_bus 0000:28: resource 1 mem: [0xe0000000-0xe3ffffff] [ 0.344132] pci_bus 0000:28: resource 2 mem: [0x0-0x0] [ 0.344133] pci_bus 0000:28: resource 3 mem: [0x0-0x0] [ 0.344135] pci_bus 0000:02: resource 0 io: [0x6000-0x6fff] [ 0.344136] pci_bus 0000:02: resource 1 mem: [0xe4100000-0xe43fffff] [ 0.344138] pci_bus 0000:02: resource 2 mem: [0xc4000000-0xcbffffff] [ 0.344140] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.344141] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.344143] pci_bus 0000:03: resource 0 io: [0x6000-0x60ff] [ 0.344145] pci_bus 0000:03: resource 1 io: [0x6400-0x64ff] [ 0.344146] pci_bus 0000:03: resource 2 mem: [0xc4000000-0xc7ffffff] [ 0.344148] pci_bus 0000:03: resource 3 mem: [0xcc000000-0xcfffffff] [ 0.344150] pci_bus 0000:04: resource 0 io: [0x6800-0x68ff] [ 0.344151] pci_bus 0000:04: resource 1 io: [0x6c00-0x6cff] [ 0.344153] pci_bus 0000:04: resource 2 mem: [0xc8000000-0xcbffffff] [ 0.344155] pci_bus 0000:04: resource 3 mem: [0xe8000000-0xebffffff] [ 0.344176] NET: Registered protocol family 2 [ 0.380027] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.380498] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.382327] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.382860] TCP: Hash tables configured (established 262144 bind 65536) [ 0.382862] TCP reno registered [ 0.392078] NET: Registered protocol family 1 [ 0.392185] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 [ 0.503956] Switched to high resolution mode on CPU 0 [ 0.593610] it is [ 0.808364] Freeing initrd memory: 6108k freed [ 0.811728] audit: initializing netlink socket (disabled) [ 0.811741] type=2000 audit(1239975323.809:1): initialized [ 0.812116] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.814004] VFS: Disk quotas dquot_6.5.2 [ 0.814069] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.814144] msgmni has been set to 7672 [ 0.814293] alg: No test for stdrng (krng) [ 0.814371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.814373] io scheduler noop registered [ 0.814422] io scheduler cfq registered (default) [ 0.814573] pci 0000:01:00.0: Boot video device [ 0.814678] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.814724] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.814829] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.814902] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.815037] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.815111] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.815272] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.815346] pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X [ 0.818273] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.818702] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.818772] 0000:00:03.3: ttyS0 at I/O 0x5030 (irq = 17) is a 16550A [ 0.820036] brd: module loaded [ 0.820117] PNP: PS/2 Controller [PNP0303:C251,PNP0f13:C252] at 0x60,0x64 irq 1,12 [ 0.821987] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.822745] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.822749] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.822752] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.822754] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.822756] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.822883] mice: PS/2 mouse device common for all mice [ 0.822945] cpuidle: using governor ladder [ 0.822947] cpuidle: using governor menu [ 0.823192] TCP cubic registered [ 0.823553] Freeing unused kernel memory: 312k freed [ 0.823684] Write protecting the kernel read-only data: 3264k [ 0.854052] input: AT Translated Set 2 keyboard as /class/input/input0 [ 0.929059] fuse init (API version 7.11) [ 0.945851] fan PNP0C0B:00: registered as cooling_device0 [ 0.945857] ACPI: Fan [C36B] (off) [ 0.946107] fan PNP0C0B:01: registered as cooling_device1 [ 0.946112] ACPI: Fan [C36C] (off) [ 0.946358] fan PNP0C0B:02: registered as cooling_device2 [ 0.946363] ACPI: Fan [C36D] (off) [ 0.946610] fan PNP0C0B:03: registered as cooling_device3 [ 0.946614] ACPI: Fan [C36E] (off) [ 0.946859] fan PNP0C0B:04: registered as cooling_device4 [ 0.946864] ACPI: Fan [C36F] (off) [ 0.946990] fan PNP0C0B:05: registered as cooling_device5 [ 0.946994] ACPI: Fan [C370] (off) [ 0.947244] fan PNP0C0B:06: registered as cooling_device6 [ 0.947249] ACPI: Fan [C388] (off) [ 0.947496] fan PNP0C0B:07: registered as cooling_device7 [ 0.947500] ACPI: Fan [C389] (off) [ 0.947752] fan PNP0C0B:08: registered as cooling_device8 [ 0.947757] ACPI: Fan [C38A] (off) [ 0.948011] fan PNP0C0B:09: registered as cooling_device9 [ 0.948015] ACPI: Fan [C38B] (off) [ 0.948262] fan PNP0C0B:0a: registered as cooling_device10 [ 0.948267] ACPI: Fan [C38C] (off) [ 0.952680] ACPI: SSDT BFFDB95D, 02C1 (r1 HP Cpu0Ist 3000 INTL 20060317) [ 0.953137] ACPI: SSDT BFFDBCA3, 05FA (r1 HP Cpu0Cst 3001 INTL 20060317) [ 0.959411] Monitor-Mwait will be used to enter C-1 state [ 0.959417] Monitor-Mwait will be used to enter C-2 state [ 0.959421] Monitor-Mwait will be used to enter C-3 state [ 0.959573] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.959610] processor ACPI_CPU:00: registered as cooling_device11 [ 0.959613] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.959941] ACPI: SSDT BFFDB895, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317) [ 0.960295] ACPI: SSDT BFFDBC1E, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317) [ 0.961309] Marking TSC unstable due to TSC halts in idle [ 0.993122] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.993188] processor ACPI_CPU:01: registered as cooling_device12 [ 0.993198] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.999203] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.001416] ACPI: Thermal Zone [TZ2] (39 C) [ 1.016096] thermal LNXTHERM:02: registered as thermal_zone1 [ 1.017808] ACPI: Thermal Zone [TZ3] (33 C) [ 1.024692] thermal LNXTHERM:03: registered as thermal_zone2 [ 1.036763] ACPI: Thermal Zone [TZ4] (33 C) [ 1.039495] thermal LNXTHERM:04: registered as thermal_zone3 [ 1.045453] ACPI: Thermal Zone [TZ5] (73 C) [ 1.063577] thermal LNXTHERM:05: registered as thermal_zone4 [ 1.072712] ACPI: Thermal Zone [TZ0] (51 C) [ 1.075758] thermal LNXTHERM:06: registered as thermal_zone5 [ 1.077596] ACPI: Thermal Zone [TZ1] (53 C) [ 1.084652] device-mapper: uevent: version 1.0.3 [ 1.084870] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 1.314054] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 [ 1.314056] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.314100] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.314109] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.314227] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 1.338917] usbcore: registered new interface driver usbfs [ 1.338944] usbcore: registered new interface driver hub [ 1.353992] usbcore: registered new device driver usb [ 1.365279] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.366493] uhci_hcd: USB Universal Host Controller Interface driver [ 1.375539] SCSI subsystem initialized [ 1.377861] ohci1394 0000:02:06.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.389171] libata version 3.00 loaded. [ 1.438164] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[e4102000-e41027ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.500103] Clocksource tsc unstable (delta = -71030829 ns) [ 1.522477] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:4b:7a:9d:98 [ 1.522479] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.522508] 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff [ 1.522737] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.522902] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.522906] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.522939] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.526843] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.526850] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.526854] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4541000 [ 1.541125] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.541243] usb usb1: configuration #1 chosen from 1 choice [ 1.541288] hub 1-0:1.0: USB hub found [ 1.541298] hub 1-0:1.0: 4 ports detected [ 1.541429] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.541437] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.541440] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.541458] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 1.541490] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005060 [ 1.541548] usb usb2: configuration #1 chosen from 1 choice [ 1.541570] hub 2-0:1.0: USB hub found [ 1.541575] hub 2-0:1.0: 2 ports detected [ 1.541679] ata_piix 0000:00:1f.1: version 2.12 [ 1.541687] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.541722] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.541785] scsi0 : ata_piix [ 1.541848] scsi1 : ata_piix [ 1.542420] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5100 irq 14 [ 1.542423] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5108 irq 15 [ 1.704483] ata1.00: ATAPI: MATSHITADVD-RAM UJ-860H, 1.02, max MWDMA2 [ 1.720427] ata1.00: configured for MWDMA2 [ 1.723149] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-860H 1.02 PQ: 0 ANSI: 5 [ 1.723337] ata2: port disabled. ignoring. [ 1.723396] ahci 0000:00:1f.2: version 3.0 [ 1.723408] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 1.723452] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X [ 1.723490] ahci: SSS flag set, parallel bus scan disabled [ 1.723513] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode [ 1.723515] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part [ 1.723521] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.723613] scsi2 : ahci [ 1.723655] scsi3 : ahci [ 1.723695] scsi4 : ahci [ 1.723744] ata3: SATA max UDMA/133 abar m2048@0xe4549000 port 0xe4549100 irq 29 [ 1.723746] ata4: DUMMY [ 1.723747] ata5: DUMMY [ 1.729339] Driver 'sr' needs updating - please use bus_type methods [ 1.737182] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.737187] Uniform CD-ROM driver Revision: 3.20 [ 1.737302] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.741493] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.044125] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.046611] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 2.046613] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out [ 2.046891] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 2.046895] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.047604] ata3.00: ATA-8: Hitachi HTS722012K9SA00, DCCOC80A, max UDMA/100 [ 2.047608] ata3.00: 234441648 sectors, multi 16: LBA48 [ 2.050323] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 2.050325] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out [ 2.050540] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 2.050545] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.051338] ata3.00: configured for UDMA/100 [ 2.069949] ata3.00: configured for UDMA/100 [ 2.069954] ata3: EH complete [ 2.070091] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS72201 DCCO PQ: 0 ANSI: 5 [ 2.070191] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.070289] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.070318] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.070321] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.070347] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 [ 2.074259] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.074265] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.074279] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4548000 [ 2.081372] Driver 'sd' needs updating - please use bus_type methods [ 2.081439] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 2.081456] sd 2:0:0:0: [sda] Write Protect is off [ 2.081458] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.081474] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.081515] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 2.081525] sd 2:0:0:0: [sda] Write Protect is off [ 2.081527] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.081543] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.081546] sda: sda1 sda2 < sda5 > [ 2.117503] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.133120] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 2.145120] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.145244] usb usb3: configuration #1 chosen from 1 choice [ 2.145300] hub 3-0:1.0: USB hub found [ 2.145311] hub 3-0:1.0: 6 ports detected [ 2.145823] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.145834] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.145837] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.145858] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.145896] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00005080 [ 2.145965] usb usb4: configuration #1 chosen from 1 choice [ 2.145986] hub 4-0:1.0: USB hub found [ 2.145991] hub 4-0:1.0: 2 ports detected [ 2.146071] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.146078] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.146082] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.146104] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 2.146130] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000050a0 [ 2.146195] usb usb5: configuration #1 chosen from 1 choice [ 2.146218] hub 5-0:1.0: USB hub found [ 2.146223] hub 5-0:1.0: 2 ports detected [ 2.146313] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 2.146319] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.146322] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.146340] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 2.146371] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000050c0 [ 2.146435] usb usb6: configuration #1 chosen from 1 choice [ 2.146456] hub 6-0:1.0: USB hub found [ 2.146461] hub 6-0:1.0: 2 ports detected [ 2.146537] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.146543] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.146546] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.146562] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 2.146587] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0 [ 2.146653] usb usb7: configuration #1 chosen from 1 choice [ 2.146675] hub 7-0:1.0: USB hub found [ 2.146680] hub 7-0:1.0: 2 ports detected [ 2.310640] usb 2-1: configuration #1 chosen from 1 choice [ 2.353780] PM: Starting manual resume from disk [ 2.353782] PM: Resume from partition 8:5 [ 2.353783] PM: Checking hibernation image. [ 2.353962] PM: Resume from disk failed. [ 2.404475] kjournald starting. Commit interval 5 seconds [ 2.404481] EXT3-fs: mounted filesystem with ordered data mode. [ 2.712274] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929ed5e0e] [ 2.873117] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 3.038307] usb 5-2: configuration #1 chosen from 1 choice [ 8.096793] udevd version 124 started [ 8.465224] device-mapper: multipath: version 1.0.5 loaded [ 8.588129] iTCO_vendor_support: vendor-support=0 [ 8.589305] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 8.589439] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) [ 8.589501] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.649133] input: Power Button (FF) as /class/input/input1 [ 8.652799] input: PC Speaker as /class/input/input2 [ 8.669097] ACPI: Power Button (FF) [PWRF] [ 8.669201] input: Sleep Button (CM) as /class/input/input3 [ 8.705081] ACPI: Sleep Button (CM) [C274] [ 8.705146] input: Lid Switch as /class/input/input4 [ 8.713166] ACPI: Lid Switch [C26E] [ 8.841161] ACPI: Battery Slot [C1F4] (battery present) [ 8.841790] ACPI: Battery Slot [C1F3] (battery absent) [ 8.872717] ACPI: AC Adapter [C1F2] (off-line) [ 8.941270] acpi device:03: registered as cooling_device13 [ 8.942281] input: Video Bus as /class/input/input5 [ 8.968105] ACPI: Video Device [C14B] (multi-head: yes rom: no post: no) [ 9.068764] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30c5] [ 9.104862] tpm_inf_pnp 00:03: Found C239 with ID IFX0102 [ 9.104913] tpm_inf_pnp 00:03: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 9.112419] lis3lv02d: 2-byte sensor found [ 9.112423] lis3lv02d: hardware type NC8510 found. [ 9.112440] Registered led device: hp::hddprotect [ 9.123967] input: ST LIS3LV02DL Accelerometer as /class/input/input6 [ 9.128085] lis3_init_device: irq 23 [ 9.128087] lis3: registering device [ 9.128126] lis3lv02d driver loaded. [ 9.184375] ACPI: WMI: Mapper loaded [ 9.197884] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 9.197888] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 9.197893] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff [ 9.197895] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff [ 9.197898] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff [ 9.198092] yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:30c5] [ 9.200759] Bluetooth: Core ver 2.14 [ 9.202703] NET: Registered protocol family 31 [ 9.202704] Bluetooth: HCI device and connection manager initialized [ 9.202707] Bluetooth: HCI socket layer initialized [ 9.220049] ricoh-mmc: Ricoh MMC Controller disabling driver [ 9.220054] ricoh-mmc: Copyright(c) Philip Langdale [ 9.233098] cfg80211: Calling CRDA to update world regulatory domain [ 9.258786] sdhci: Secure Digital Host Controller Interface driver [ 9.258788] sdhci: Copyright(c) Pierre Ossman [ 9.276615] Bluetooth: Generic Bluetooth USB driver ver 0.4 [ 9.277354] usbcore: registered new interface driver btusb [ 9.325843] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0000, PCI irq 17 [ 9.325846] yenta_cardbus 0000:02:06.1: Socket status: 30000810 [ 9.325849] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07 [ 9.325857] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff [ 9.325859] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff [ 9.325861] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff [ 9.327385] parport_pc 00:02: reported by Plug and Play ACPI [ 9.327461] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 9.329406] ricoh-mmc: Ricoh MMC controller found at 0000:02:06.4 [1180:0843] (rev 10) [ 9.329424] ricoh-mmc: Controller is now disabled. [ 9.329463] sdhci-pci 0000:02:06.3: SDHCI controller found [1180:0822] (rev 20) [ 9.329480] sdhci-pci 0000:02:06.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 9.331556] Registered led device: mmc0:: [ 9.332608] mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO [ 9.385325] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 9.385335] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 9.385377] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.414833] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks [ 9.414835] iwlagn: Copyright(c) 2003-2008 Intel Corporation [ 9.414956] iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 9.414966] iwlagn 0000:10:00.0: setting latency timer to 64 [ 9.415063] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 9.477827] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels [ 9.478632] iwlagn 0000:10:00.0: PCI INT A disabled [ 9.478702] wmaster0 (iwlagn): not using net_device_ops yet [ 9.478919] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 9.519524] wlan0 (iwlagn): not using net_device_ops yet [ 9.588873] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 9.588947] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 9.826066] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa44793/0x300000 [ 9.826073] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 9.867525] input: SynPS/2 Synaptics TouchPad as /class/input/input7 [ 9.965115] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1 [ 9.997116] pcmcia_socket pcmcia_socket1: cs: memory probe 0xc4000000-0xcbffffff: excluding 0xc4000000-0xcbffffff [ 9.997146] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe4100000-0xe43fffff: excluding 0xe4100000-0xe412ffff [ 10.002436] pcmcia 1.0: pcmcia: registering new device pcmcia1.0 [ 10.139601] lp0: using parport0 (interrupt-driven). [ 10.231311] Adding 4803392k swap on /dev/sda5. Priority:-1 extents:1 across:4803392k [ 10.245666] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 10.246008] EXT3 FS on sda1, internal journal [ 10.832908] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.552720] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 12.957190] NET: Registered protocol family 10 [ 12.957567] lo: Disabled Privacy Extensions [ 14.544665] input: PS/2 Generic Mouse as /class/input/input8 [ 16.481559] ppdev: user-space parallel port driver [ 18.372340] Bridge firewalling registered [ 18.456354] vnet0: starting userspace STP failed, starting kernel STP [ 18.788598] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 18.788808] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 18.788810] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 18.788812] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 22.318405] Bluetooth: L2CAP ver 2.11 [ 22.318410] Bluetooth: L2CAP socket layer initialized [ 22.339950] Bluetooth: SCO (Voice Link) ver 0.6 [ 22.339956] Bluetooth: SCO socket layer initialized [ 22.355128] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.355135] Bluetooth: BNEP filters: protocol multicast [ 22.448322] Bluetooth: RFCOMM socket layer initialized [ 22.448342] Bluetooth: RFCOMM TTY layer initialized [ 22.448346] Bluetooth: RFCOMM ver 1.10 [ 24.668285] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 26.881563] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 26.936306] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 26.937868] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.942792] iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 26.942931] iwlagn 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 26.943099] iwlagn 0000:10:00.0: irq 30 for MSI/MSI-X [ 26.943212] iwlagn 0000:10:00.0: firmware: requesting iwlwifi-4965-2.ucode [ 27.202613] iwlagn loaded firmware version 228.57.2.23 [ 27.409469] Registered led device: iwl-phy0:radio [ 27.410077] Registered led device: iwl-phy0:assoc [ 27.411811] Registered led device: iwl-phy0:RX [ 27.411899] Registered led device: iwl-phy0:TX [ 27.453545] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 27.574154] NET: Registered protocol family 17 [ 28.605052] vnet0: no IPv6 routers present [ 38.049145] CE: hpet increasing min_delta_ns to 15000 nsec [ 102.421511] Monitor-Mwait will be used to enter C-2 state [ 108.145656] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 108.146919] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 118.780098] eth0: no IPv6 routers present [ 134.340199] ppdev0: registered pardevice [ 134.388093] ppdev0: unregistered pardevice [ 134.668443] ppdev0: registered pardevice [ 134.716425] ppdev0: unregistered pardevice [ 136.331159] ppdev0: registered pardevice [ 136.377183] ppdev0: unregistered pardevice [ 146.660545] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 146.661674] input: Bluetooth Laser Travel Mouse as /class/input/input9 [ 146.685182] generic-bluetooth 0005:046D:B008.0001: input,hidraw0: BLUETOOTH HID v3.13 Mouse [Bluetooth Laser Travel Mouse] on 00:1E:37:6E:FD:70 [ 2885.888003] irq 19: nobody cared (try booting with the "irqpoll" option) [ 2885.888014] Pid: 0, comm: swapper Not tainted 2.6.29.1 #1 [ 2885.888019] Call Trace: [ 2885.888023] [] __report_bad_irq+0x38/0x87 [ 2885.888045] [] note_interrupt+0x118/0x182 [ 2885.888053] [] handle_fasteoi_irq+0xa1/0xc5 [ 2885.888062] [] do_IRQ+0x70/0xe7 [ 2885.888069] [] ret_from_intr+0x0/0xa [ 2885.888073] [] ? notifier_call_chain+0x33/0x5b [ 2885.888136] [] ? acpi_idle_enter_simple+0x186/0x1f8 [processor] [ 2885.888159] [] ? acpi_idle_enter_simple+0x17c/0x1f8 [processor] [ 2885.888169] [] ? cpuidle_idle_call+0x8c/0xc6 [ 2885.888176] [] ? cpu_idle+0x52/0x93 [ 2885.888184] [] ? rest_init+0x61/0x63 [ 2885.888189] handlers: [ 2885.888192] [] (sdhci_irq+0x0/0x49a [sdhci]) [ 2885.888208] Disabling IRQ #19 --=-HSaFkWIgE8JUGtwOuwxQ-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/