Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754374AbZDZNuk (ORCPT ); Sun, 26 Apr 2009 09:50:40 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751556AbZDZNub (ORCPT ); Sun, 26 Apr 2009 09:50:31 -0400 Received: from cathcart.site5.com ([74.54.107.137]:50800 "EHLO cathcart.site5.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750871AbZDZNua (ORCPT ); Sun, 26 Apr 2009 09:50:30 -0400 From: Mike Rapoport To: broonie@opensource.wolfsonmicro.com Cc: lrg@slimlogic.co.uk, linux-kernel@vger.kernel.org, Mike Rapoport Subject: [PATCH] regulator: add userspace-consumer driver Date: Sun, 26 Apr 2009 16:49:39 +0300 Message-Id: <1240753779-28189-1-git-send-email-mike@compulab.co.il> X-Mailer: git-send-email 1.5.6.4 In-Reply-To: <20090426120036.GA10900@opensource.wolfsonmicro.com> References: <20090426120036.GA10900@opensource.wolfsonmicro.com> In-Reply-To: <20090426120036.GA10900@opensource.wolfsonmicro.com> References: <20090426120036.GA10900@opensource.wolfsonmicro.com> X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - cathcart.site5.com X-AntiAbuse: Original Domain - vger.kernel.org X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - compulab.co.il X-Source: X-Source-Args: X-Source-Dir: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8478 Lines: 293 The userspace-consumer driver allows control of voltage and current regulator state from userspace. This is required for fine-grained power management of devices that are completely controller by userspace applications, e.g. a GPS transciever connected to a serial port. Signed-off-by: Mike Rapoport --- drivers/regulator/Kconfig | 10 ++ drivers/regulator/Makefile | 1 + drivers/regulator/userspace-consumer.c | 200 ++++++++++++++++++++++++++ include/linux/regulator/userspace-consumer.h | 25 ++++ 4 files changed, 236 insertions(+), 0 deletions(-) create mode 100644 drivers/regulator/userspace-consumer.c create mode 100644 include/linux/regulator/userspace-consumer.h diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index e58c0ce..d736e61 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -47,6 +47,16 @@ config REGULATOR_VIRTUAL_CONSUMER If unsure, say no. +config REGULATOR_USERSPACE_CONSUMER + tristate "Userspace regulator consumer support" + default n + help + There are some classes of devices that are controlled entirely + from user space. Usersapce consumer driver provides ability to + control power supplies for such devices. + + If unsure, say no. + config REGULATOR_BQ24022 tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" default n diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index bac133a..b8d4290 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_REGULATOR) += core.o obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o +obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o diff --git a/drivers/regulator/userspace-consumer.c b/drivers/regulator/userspace-consumer.c new file mode 100644 index 0000000..71fcf9d --- /dev/null +++ b/drivers/regulator/userspace-consumer.c @@ -0,0 +1,200 @@ +/* + * userspace-consumer.c + * + * Copyright 2009 CompuLab, Ltd. + * + * Author: Mike Rapoport + * + * Based of virtual consumer driver: + * Copyright 2008 Wolfson Microelectronics PLC. + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include + +struct userspace_consumer_data { + const char *name; + + struct mutex lock; + bool enabled; + + int num_supplies; + struct regulator_bulk_data *supplies; +}; + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct userspace_consumer_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", data->name); +} + +static ssize_t show_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct userspace_consumer_data *data = dev_get_drvdata(dev); + + if (data->enabled) + return sprintf(buf, "enabled\n"); + + return sprintf(buf, "disabled\n"); +} + +static ssize_t set_state(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct userspace_consumer_data *data = dev_get_drvdata(dev); + bool enabled; + int ret; + + /* + * sysfs_streq() doesn't need the \n's, but we add them so the strings + * will be shared with show_state(), above. + */ + if (sysfs_streq(buf, "enabled\n") || sysfs_streq(buf, "1")) + enabled = true; + else if (sysfs_streq(buf, "disabled\n") || sysfs_streq(buf, "0")) + enabled = false; + else { + dev_err(dev, "Configuring invalid mode\n"); + return count; + } + + mutex_lock(&data->lock); + if (enabled != data->enabled) { + if (enabled) + ret = regulator_bulk_enable(data->num_supplies, + data->supplies); + else + ret = regulator_bulk_disable(data->num_supplies, + data->supplies); + + if (ret == 0) + data->enabled = enabled; + else + dev_err(dev, "Failed to configure state: %d\n", ret); + } + mutex_unlock(&data->lock); + + return count; +} + +static DEVICE_ATTR(name, 0444, show_name, NULL); +static DEVICE_ATTR(state, 0644, show_state, set_state); + +static struct device_attribute *attributes[] = { + &dev_attr_name, + &dev_attr_state, +}; + +static int regulator_userspace_consumer_probe(struct platform_device *pdev) +{ + struct regulator_userspace_consumer_data *pdata; + struct userspace_consumer_data *drvdata; + int ret, i; + + pdata = pdev->dev.platform_data; + if (!pdata) + return -EINVAL; + + drvdata = kzalloc(sizeof(struct userspace_consumer_data), GFP_KERNEL); + if (drvdata == NULL) + return -ENOMEM; + + drvdata->name = pdata->name; + drvdata->num_supplies = pdata->num_supplies; + drvdata->supplies = pdata->supplies; + + mutex_init(&drvdata->lock); + + ret = regulator_bulk_get(&pdev->dev, drvdata->num_supplies, + drvdata->supplies); + if (ret) { + dev_err(&pdev->dev, "Failed to get supplies: %d\n", ret); + goto err_alloc_supplies; + } + + for (i = 0; i < ARRAY_SIZE(attributes); i++) { + ret = device_create_file(&pdev->dev, attributes[i]); + if (ret != 0) + goto err_create_attrs; + } + + if (pdata->init_on) + ret = regulator_bulk_enable(drvdata->num_supplies, + drvdata->supplies); + + drvdata->enabled = pdata->init_on; + + if (ret) { + dev_err(&pdev->dev, "Failed to set initial state: %d\n", ret); + goto err_create_attrs; + } + + platform_set_drvdata(pdev, drvdata); + + return 0; + +err_create_attrs: + for (i = 0; i < ARRAY_SIZE(attributes); i++) + device_remove_file(&pdev->dev, attributes[i]); + + regulator_bulk_free(drvdata->num_supplies, drvdata->supplies); + +err_alloc_supplies: + kfree(drvdata); + return ret; +} + +static int regulator_userspace_consumer_remove(struct platform_device *pdev) +{ + struct userspace_consumer_data *data = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < ARRAY_SIZE(attributes); i++) + device_remove_file(&pdev->dev, attributes[i]); + + if (data->enabled) + regulator_bulk_disable(data->num_supplies, data->supplies); + + regulator_bulk_free(data->num_supplies, data->supplies); + kfree(data); + + return 0; +} + +static struct platform_driver regulator_userspace_consumer_driver = { + .probe = regulator_userspace_consumer_probe, + .remove = regulator_userspace_consumer_remove, + .driver = { + .name = "reg-userspace-consumer", + }, +}; + + +static int __init regulator_userspace_consumer_init(void) +{ + return platform_driver_register(®ulator_userspace_consumer_driver); +} +module_init(regulator_userspace_consumer_init); + +static void __exit regulator_userspace_consumer_exit(void) +{ + platform_driver_unregister(®ulator_userspace_consumer_driver); +} +module_exit(regulator_userspace_consumer_exit); + +MODULE_AUTHOR("Mike Rapoport "); +MODULE_DESCRIPTION("Userspace consumer for voltage and current regulators"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/regulator/userspace-consumer.h b/include/linux/regulator/userspace-consumer.h new file mode 100644 index 0000000..b4554ce --- /dev/null +++ b/include/linux/regulator/userspace-consumer.h @@ -0,0 +1,25 @@ +#ifndef __REGULATOR_PLATFORM_CONSUMER_H_ +#define __REGULATOR_PLATFORM_CONSUMER_H_ + +struct regulator_consumer_supply; + +/** + * struct regulator_userspace_consumer_data - line consumer + * initialisation data. + * + * @name: Name for the consumer line + * @num_supplies: Number of supplies feeding the line + * @supplies: Supplies configuration. + * @init_on: Set if the regulators supplying the line should be + * enabled during initialisation + */ +struct regulator_userspace_consumer_data { + const char *name; + + int num_supplies; + struct regulator_bulk_data *supplies; + + bool init_on; +}; + +#endif /* __REGULATOR_PLATFORM_CONSUMER_H_ */ -- 1.5.6.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/