Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 2 Mar 2002 19:25:58 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 2 Mar 2002 19:25:39 -0500 Received: from astound-64-85-224-253.ca.astound.net ([64.85.224.253]:40709 "EHLO master.linux-ide.org") by vger.kernel.org with ESMTP id ; Sat, 2 Mar 2002 19:25:34 -0500 Date: Sat, 2 Mar 2002 16:25:05 -0800 (PST) From: Andre Hedrick To: john slee cc: Hans-Peter Jansen , Henrik Lassen , "linux-kernel@vger.kernel.org" , ataraid-list@redhat.com Subject: Re: Please In-Reply-To: <20020302230317.GB32121@higherplane.net> Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Sun, 3 Mar 2002, john slee wrote: > On Sat, Mar 02, 2002 at 04:43:58PM +0100, Hans-Peter Jansen wrote: > > The problem is called Andre Hedrick, a guy who is talking in miracles, > > but seems to be unable to fix either the issues with: > > - the single TX4 with multiple PDC20270 > > nor: > > - multiple TX2 with PDC20268 > > > > or at least ignores further communication on that problems, if you > > don't use some magic storage peoples language.(*) TM in a parallel > > universe, not too far from here... > > so you're going to fix the problems yourself then? > > j. You mean this does not work for you? Serious question, not being flip. Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7441: IDE controller on PCI bus 00 dev 39 AMD7441: chipset revision 3 AMD7441: not 100% native mode: will probe irqs later AMD7441: disabling single-word DMA support (revision < C4) ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio PDC20270: IDE controller on PCI bus 03 dev 08 PDC20270: chipset revision 2 PDC20270: not 100% native mode: will probe irqs later ide2: BM-DMA at 0x9000-0x9007, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x9008-0x900f, BIOS settings: hdg:pio, hdh:pio PDC20270: IDE controller on PCI bus 03 dev 10 PDC20270: chipset revision 2 PDC20270: not 100% native mode: will probe irqs later PDC20270: ROM enabled at 0x000dc000 ide4: BM-DMA at 0xa400-0xa407, BIOS settings: hdi:pio, hdj:pio ide5: BM-DMA at 0xa408-0xa40f, BIOS settings: hdk:pio, hdl:pio hda: IBM-DTLA-307075, ATA DISK drive hdc: LTN242, ATAPI CD/DVD-ROM drive hde: Maxtor 4G160J8, ATA DISK drive hdg: Maxtor 4G160J8, ATA DISK drive hdi: Maxtor 4G160J8, ATA DISK drive hdk: Maxtor 4G160J8, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0x8000-0x8007,0x8402 on irq 11 ide3 at 0x8800-0x8807,0x8c02 on irq 11 ide4 at 0x9400-0x9407,0x9802 on irq 11 ide5 at 0x9c00-0x9c07,0xa002 on irq 11 hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63, UDMA(100) hde: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100) hdg: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100) hdi: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100) hdk: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 > /dev/ide/host2/bus0/target0/lun0: p1 /dev/ide/host2/bus1/target0/lun0: p1 /dev/ide/host4/bus0/target0/lun0: p1 /dev/ide/host4/bus1/target0/lun0: p1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7441: IDE controller on PCI bus 00 dev 39 AMD7441: chipset revision 3 AMD7441: not 100% native mode: will probe irqs later AMD7441: disabling single-word DMA support (revision < C4) ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:pio PDC20269: IDE controller on PCI bus 00 dev 40 PDC20269: chipset revision 2 PDC20269: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio PDC20269: IDE controller on PCI bus 00 dev 48 PDC20269: chipset revision 2 PDC20269: not 100% native mode: will probe irqs later ide4: BM-DMA at 0xe800-0xe807, BIOS settings: hdi:pio, hdj:pio ide5: BM-DMA at 0xe808-0xe80f, BIOS settings: hdk:pio, hdl:pio hda: IBM-DTLA-307075, ATA DISK drive hdc: LTN242, ATAPI CD/DVD-ROM drive hde: Maxtor 4G160J8, ATA DISK drive hdg: Maxtor 4G160J8, ATA DISK drive hdi: Maxtor 4G160J8, ATA DISK drive hdk: Maxtor 4G160J8, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xc400-0xc407,0xc802 on irq 10 ide3 at 0xcc00-0xcc07,0xd002 on irq 10 ide4 at 0xd800-0xd807,0xdc02 on irq 11 ide5 at 0xe000-0xe007,0xe402 on irq 11 hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63, UDMA(100) hde: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133) hdg: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133) hdi: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133) hdk: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 > /dev/ide/host2/bus0/target0/lun0: p1 /dev/ide/host2/bus1/target0/lun0: p1 /dev/ide/host4/bus0/target0/lun0: p1 /dev/ide/host4/bus1/target0/lun0: p1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Clearly they work, the obvious point that is missed is the work is not being accepted. Oh and I am human, too, regardless what most think or hate about me. Regards, Andre Hedrick Linux Disk Certification Project Linux ATA Development - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/