Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757752AbZFBQbF (ORCPT ); Tue, 2 Jun 2009 12:31:05 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754457AbZFBQaz (ORCPT ); Tue, 2 Jun 2009 12:30:55 -0400 Received: from 195-23-16-24.net.novis.pt ([195.23.16.24]:52219 "EHLO bipbip.grupopie.com" rhost-flags-OK-FAIL-OK-OK) by vger.kernel.org with ESMTP id S1753783AbZFBQay (ORCPT ); Tue, 2 Jun 2009 12:30:54 -0400 X-Greylist: delayed 1275 seconds by postgrey-1.27 at vger.kernel.org; Tue, 02 Jun 2009 12:30:54 EDT Message-ID: <4A254EBF.70004@grupopie.com> Date: Tue, 02 Jun 2009 17:09:35 +0100 From: Rui Santos Organization: GrupoPIE, Portugal SA User-Agent: Thunderbird 2.0.0.21 (X11/20090310) MIME-Version: 1.0 To: Wim Van Sebroeck CC: Stephen Clark , Denys Fedoryschenko , Johannes Dewender , "Rafael J. Wysocki" , Frans Pop , Rutger Nijlunsing , Kernel Testers List , Andriy Gapon , Andrew Morton , LKML Subject: Re: [WATCHDOG] iTCO_wdt.c - ICH9 reboot issue - testing wanted References: <20090430094918.GC4141@infomag.iguana.be> In-Reply-To: <20090430094918.GC4141@infomag.iguana.be> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7310 Lines: 182 Wim Van Sebroeck wrote: > Hi All, > Hi Wim, > I'm looking for people that can test the below patch(es). > I'm mainly interested in knowing if you experience any side-effects when using this patch. > (See also bugzilla 9868, 10195, 12363 & 12162). > > For people not using the watchdog or without any reboot problems the driver should > work as normal after compilation/installation/... > > For people that have the ICH9 reboot problems: load the module with module-parameter > gbl_smi_en=0 and test the watchdog functionality again. > Just to let you know that gbl_smi_en=0, also solves the problem with Intel DG35EC motherboard, witch uses a 82801HB I/O Controller Hub (ICH8) Regards, Rui > Thanks in advance, > Wim. > > The Changes are: > > Author: Wim Van Sebroeck > Date: Thu Apr 30 09:13:33 2009 +0000 > > [WATCHDOG] iTCO_wdt: Fix ICH9 reboot issue. > > Bugzilla: 9868 & 10195. > There seems to be a bug into the SMM code that handles TCO Timeout SMI. > Andriy Gapon found that the code on his DG33TL system does the following: > > The handler is quite simple - it tests value in TCO1_CNT against 0x800, i.e. > > checks TCO_TMR_HLT. If the bit is set the handler goes into an infinite loop, > > apparently to allow the second timeout and reboot. Otherwise it simply clears > > TIMEOUT bit in TCO1_STS and that's it. > > So the logic seems to be reversed, because it is hard to see how TIMEOUT can > > get set to 1 and SMI generated when TCO_TMR_HLT is set (other than a > > transitional effect). > > The only trick we have is to bypass the SMM code by turning of the generation > of the SMI#. The trick can only be enabled by setting the gbl_smi_en module > parameter to 0. > > Signed-off-by: Wim Van Sebroeck > > Author: Wim Van Sebroeck > Date: Tue Apr 14 20:20:07 2009 +0000 > > [WATCHDOG] iTCO_wdt: Cleanup code > > Clean-up the iTCO_wdt code so that checkpatch.pl get's happy... > > Signed-off-by: Wim Van Sebroeck > > The Changes can also be looked at on: > http://www.kernel.org/git/?p=linux/kernel/git/wim/linux-2.6-watchdog.git;a=summary > > For completeness, I added the overal diff below. > > Greetings, > Wim. > > ================================================================================ > diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c > index d3c0f6d..843ef62 100644 > --- a/drivers/watchdog/iTCO_vendor_support.c > +++ b/drivers/watchdog/iTCO_vendor_support.c > @@ -35,9 +35,9 @@ > #include "iTCO_vendor.h" > > /* iTCO defines */ > -#define SMI_EN acpibase + 0x30 /* SMI Control and Enable Register */ > -#define TCOBASE acpibase + 0x60 /* TCO base address */ > -#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ > +#define SMI_EN (acpibase + 0x30) /* SMI Control and Enable Register */ > +#define TCOBASE (acpibase + 0x60) /* TCO base address */ > +#define TCO1_STS (TCOBASE + 0x04) /* TCO1 Status Register */ > > /* List of vendor support modes */ > /* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */ > diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c > index 648250b..b76d1ec 100644 > --- a/drivers/watchdog/iTCO_wdt.c > +++ b/drivers/watchdog/iTCO_wdt.c > @@ -63,7 +63,7 @@ > > /* Module and version information */ > #define DRV_NAME "iTCO_wdt" > -#define DRV_VERSION "1.05" > +#define DRV_VERSION "1.06" > #define PFX DRV_NAME ": " > > /* Includes */ > @@ -236,19 +236,19 @@ MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); > > /* Address definitions for the TCO */ > /* TCO base address */ > -#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 > +#define TCOBASE (iTCO_wdt_private.ACPIBASE + 0x60) > /* SMI Control and Enable Register */ > -#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 > - > -#define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Curr. Value */ > -#define TCOv1_TMR TCOBASE + 0x01 /* TCOv1 Timer Initial Value */ > -#define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */ > -#define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */ > -#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ > -#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */ > -#define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */ > -#define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */ > -#define TCOv2_TMR TCOBASE + 0x12 /* TCOv2 Timer Initial Value */ > +#define SMI_EN (iTCO_wdt_private.ACPIBASE + 0x30) > + > +#define TCO_RLD (TCOBASE + 0x00) /* TCO Timer Reload and Curr. Value */ > +#define TCOv1_TMR (TCOBASE + 0x01) /* TCOv1 Timer Initial Value */ > +#define TCO_DAT_IN (TCOBASE + 0x02) /* TCO Data In Register */ > +#define TCO_DAT_OUT (TCOBASE + 0x03) /* TCO Data Out Register */ > +#define TCO1_STS (TCOBASE + 0x04) /* TCO1 Status Register */ > +#define TCO2_STS (TCOBASE + 0x06) /* TCO2 Status Register */ > +#define TCO1_CNT (TCOBASE + 0x08) /* TCO1 Control Register */ > +#define TCO2_CNT (TCOBASE + 0x0a) /* TCO2 Control Register */ > +#define TCOv2_TMR (TCOBASE + 0x12) /* TCOv2 Timer Initial Value */ > > /* internal variables */ > static unsigned long is_active; > @@ -277,6 +277,13 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. " > "(2 > +#define GBL_SMI_EN_DEFAULT 1 /* 1 = don't turn GBL_SMI_EN off */ > +static int gbl_smi_en = GBL_SMI_EN_DEFAULT; > +module_param(gbl_smi_en, int, 0); > +MODULE_PARM_DESC(gbl_smi_en, > + "Turn GBL_SMI_EN off to fix reboot issues on ICH9..., default=" > + __MODULE_STRING(GBL_SMI_EN_DEFAULT) ")"); > + > static int nowayout = WATCHDOG_NOWAYOUT; > module_param(nowayout, int, 0); > MODULE_PARM_DESC(nowayout, > @@ -688,9 +695,12 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, > ret = -EIO; > goto out; > } > - /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ > val32 = inl(SMI_EN); > + /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# > + Bit 0: GBL_SMI_EN -> 0 = No SMI# will be generated by ICH9. */ > val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ > + if (gbl_smi_en == 0) > + val32 &= 0xfffffffe; /* Turn off GBL_SMI_EN */ > outl(val32, SMI_EN); > > /* The TCO I/O registers reside in a 32-byte range pointed to > @@ -733,8 +743,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, > goto unreg_region; > } > > - printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n", > - heartbeat, nowayout); > + printk(KERN_INFO PFX "initialized. heartbeat=%d sec, gbl_smi_en=%d " > + "(nowayout=%d)\n", heartbeat, gbl_smi_en, nowayout); > > return 0; > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/