Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755361AbZFCJM6 (ORCPT ); Wed, 3 Jun 2009 05:12:58 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752411AbZFCJMv (ORCPT ); Wed, 3 Jun 2009 05:12:51 -0400 Received: from smtprelay03.ispgateway.de ([80.67.31.37]:54688 "EHLO smtprelay03.ispgateway.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751985AbZFCJMt (ORCPT ); Wed, 3 Jun 2009 05:12:49 -0400 Message-ID: X-Mailer: http://www.courier-mta.org/cone/ From: Peter Feuerer To: Len Brown Cc: Borislav Petkov , Matthew Garrett , LKML Subject: [PATCH] Request driver inclusion - acer aspire one fan control Date: Wed, 03 Jun 2009 11:10:49 +0200 Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset="UTF-8" Content-Disposition: inline Content-Transfer-Encoding: 8bit X-Df-Sender: 404094 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 16880 Lines: 617 Hi Len, please include following driver. thanks and best regards, --peter Acerhdf is a driver for Acer Aspire One netbooks. It allows to access the temperature sensor and to control the fan. Signed-off-by: Peter Feuerer Reviewed-by: Borislav Petkov Tested-by: Borislav Petkov diff --git a/MAINTAINERS b/MAINTAINERS index cf4abdd..e9457fe 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -222,6 +222,13 @@ L: linux-acenic@sunsite.dk S: Maintained F: drivers/net/acenic* +ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER +P: Peter Feuerer +M: peter@piie.net +W: http://piie.net/?section=acerhdf +S: Maintained +F: drivers/platform/x86/acerhdf.c + ACER WMI LAPTOP EXTRAS P: Carlos Corbacho M: carlos@strangeworlds.co.uk diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 284ebac..fe14dfd 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -34,6 +34,23 @@ config ACER_WMI If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M here. +config ACERHDF + tristate "Acer Aspire One temperature and fan driver" + depends on THERMAL && THERMAL_HWMON + ---help--- + This is a driver for Acer Aspire One netbooks. It allows to access + the temperature sensor and to control the fan. + + After loading this driver the BIOS is still in control of the fan. + To let the kernel handle the fan, do: + echo -n enabled > /sys/class/thermal/thermal_zone0/mode + + For more information about this driver see + + + If you have an Acer Aspire One netbook, say Y or M + here. + config ASUS_LAPTOP tristate "Asus Laptop Extras (EXPERIMENTAL)" depends on ACPI diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index e40c7bd..641b8bf 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o obj-$(CONFIG_DELL_WMI) += dell-wmi.o obj-$(CONFIG_ACER_WMI) += acer-wmi.o +obj-$(CONFIG_ACERHDF) += acerhdf.o obj-$(CONFIG_HP_WMI) += hp-wmi.o obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c new file mode 100644 index 0000000..0e5bcd5 --- /dev/null +++ b/drivers/platform/x86/acerhdf.c @@ -0,0 +1,533 @@ +/* + * acerhdf - A driver which monitors the temperature + * of the aspire one netbook, turns on/off the fan + * as soon as the upper/lower threshold is reached. + * + * (C) 2009 - Peter Feuerer peter (a) piie.net + * http://piie.net + * + * Inspired by and many thanks to: + * o acerfand - Rachel Greenham + * o acer_ec.pl - Michael Kurz michi.kurz (at) googlemail.com + * - Petr Tomasek tomasek (#) etf,cuni,cz + * - Carlos Corbacho cathectic (at) gmail.com + * - Matthew Garrett + * - Borislav Petkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define pr_fmt(fmt) "acerhdf: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * if you want the module to be started in kernel mode, + * define the following: + */ +#undef START_IN_KERNEL_MODE + +#define VERSION "0.5.4" + +/* + * According to the Atom N270 datasheet, + * (http://download.intel.com/design/processor/datashts/320032.pdf) the + * CPU's optimal operating limits denoted in junction temperature as + * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So, + * assume 89°C is critical temperature. + */ +#define ACERHDF_TEMP_CRIT 89 +#define ACERHDF_FAN_AUTO 1 +#define ACERHDF_FAN_OFF 0 + +/* + * No matter what value the user puts into the fanon variable, turn on the fan + * at 80 degree Celsius to prevent hardware damage + */ +#define ACERHDF_MAX_FANON 80 + +/* + * Maximal interval between to temperature checks is 20 seconds, as the die + * can get hot really fast under heavy load + */ +#define ACERHDF_MAX_INTERVAL 20 + +#define ACERHDF_ERROR -0xffff + + + +#ifdef START_IN_KERNEL_MODE +static int kernelmode = 1; +#else +static int kernelmode; +#endif + +static unsigned int interval = 10; +static unsigned int fanon = 63; +static unsigned int fanoff = 58; +static unsigned int verbose; +static unsigned int fanstate = ACERHDF_FAN_AUTO; +static int disable_kernelmode; +static int bios_version = -1; +static char force_bios[16]; +static unsigned int prev_interval; +struct thermal_zone_device *acerhdf_thz_dev; +struct thermal_cooling_device *acerhdf_cool_dev; + +module_param(kernelmode, uint, 0); +MODULE_PARM_DESC(kernelmode, "Kernel mode on / off"); +module_param(interval, uint, 0600); +MODULE_PARM_DESC(interval, "Polling interval of temperature check"); +module_param(fanon, uint, 0600); +MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature"); +module_param(fanoff, uint, 0600); +MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature"); +module_param(verbose, uint, 0600); +MODULE_PARM_DESC(verbose, "Enable verbose dmesg output"); +module_param_string(force_bios, force_bios, 16, 0); +MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check"); + +/* BIOS settings */ +struct bios_settings_t { + const char *vendor; + const char *version; + unsigned char fanreg; + unsigned char tempreg; + unsigned char cmd_off; + unsigned char cmd_auto; +}; + +/* Register addresses and values for different BIOS versions */ +static const struct bios_settings_t bios_settings[] = { + {"Acer", "v0.3109", 0x55, 0x58, 0x1f, 0x00}, + {"Acer", "v0.3114", 0x55, 0x58, 0x1f, 0x00}, + {"Acer", "v0.3301", 0x55, 0x58, 0xaf, 0x00}, + {"Acer", "v0.3304", 0x55, 0x58, 0xaf, 0x00}, + {"Acer", "v0.3305", 0x55, 0x58, 0xaf, 0x00}, + {"Acer", "v0.3308", 0x55, 0x58, 0x21, 0x00}, + {"Acer", "v0.3309", 0x55, 0x58, 0x21, 0x00}, + {"Acer", "v0.3310", 0x55, 0x58, 0x21, 0x00}, + {"Gateway", "v0.3103", 0x55, 0x58, 0x21, 0x00}, + {"Packard Bell", "v0.3105", 0x55, 0x58, 0x21, 0x00}, + {"", 0, 0, 0, 0, 0} +}; + + +/* acer ec functions */ +static int acerhdf_get_temp(void) +{ + u8 temp; + + /* read temperature */ + if (!ec_read(bios_settings[bios_version].tempreg, &temp)) { + if (verbose) + pr_notice("temp %d\n", temp); + return temp; + } + return ACERHDF_ERROR; +} + +static int acerhdf_get_fanstate(void) +{ + u8 fan; + + if (!ec_read(bios_settings[bios_version].fanreg, &fan)) + return (fan == bios_settings[bios_version].cmd_off) ? + ACERHDF_FAN_OFF : ACERHDF_FAN_AUTO; + + return ACERHDF_ERROR; +} + +static void acerhdf_change_fanstate(int state) +{ + unsigned char cmd; + + if (verbose) + pr_notice("fan %s\n", (state == ACERHDF_FAN_AUTO) ? + "ON" : "OFF"); + + if (state == ACERHDF_FAN_AUTO) { + cmd = bios_settings[bios_version].cmd_auto; + fanstate = ACERHDF_FAN_AUTO; + } else { + cmd = bios_settings[bios_version].cmd_off; + fanstate = ACERHDF_FAN_OFF; + } + + ec_write(bios_settings[bios_version].fanreg, cmd); + +} + +/* helpers */ +static void acerhdf_check_param(struct thermal_zone_device *thermal) +{ + if (fanon > ACERHDF_MAX_FANON) { + pr_err("fanon temperature too high, set to %d\n", + ACERHDF_MAX_FANON); + fanon = ACERHDF_MAX_FANON; + } + if (kernelmode && prev_interval != interval) { + if (interval > ACERHDF_MAX_INTERVAL) { + pr_err("interval too high, set to %d\n", + ACERHDF_MAX_INTERVAL); + interval = ACERHDF_MAX_INTERVAL; + } + if (verbose) + pr_notice("interval changed to: %d\n", + interval); + thermal->polling_delay = interval*1000; + prev_interval = interval; + } +} + +/* thermal zone callback functions */ +static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal, + unsigned long *t) +{ + int temp; + + acerhdf_check_param(thermal); + + temp = acerhdf_get_temp(); + if (temp == ACERHDF_ERROR) + return -EINVAL; + + *t = temp; + return 0; +} + +static int acerhdf_bind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + /* if the cooling device is the one from acerhdf bind it */ + if (cdev != acerhdf_cool_dev) + return 0; + + if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) { + pr_err("error binding cooling dev\n"); + return -EINVAL; + } + return 0; +} + +static int acerhdf_unbind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + if (cdev != acerhdf_cool_dev) + return 0; + + if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) { + pr_err("error unbinding cooling dev\n"); + return -EINVAL; + } + return 0; +} + +/* current operation mode - enabled / disabled */ +static int acerhdf_get_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode *mode) +{ + if (verbose) + pr_notice("kernel mode %d\n", kernelmode); + + *mode = (kernelmode) ? THERMAL_DEVICE_ENABLED : + THERMAL_DEVICE_DISABLED; + + return 0; +} + +/* + * set operation mode; + * enabled: the thermal layer of the kernel takes care about + * the temperature and the fan. + * disabled: the BIOS takes control of the fan. + */ +static int acerhdf_set_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode mode) +{ + if (mode == THERMAL_DEVICE_DISABLED) { + pr_notice("kernel mode OFF\n"); + thermal->polling_delay = 0; + thermal_zone_device_update(thermal); + acerhdf_change_fanstate(ACERHDF_FAN_AUTO); + + /* + * let the thermal layer disable kernel mode. This ensures that + * the thermal layer doesn't switch off the fan again + */ + disable_kernelmode = 1; + } else { + kernelmode = 1; + pr_notice("kernel mode ON\n"); + thermal->polling_delay = interval*1000; + thermal_zone_device_update(thermal); + } + return 0; +} + +static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, + int trip, enum thermal_trip_type *type) +{ + if (trip == 0) + *type = THERMAL_TRIP_ACTIVE; + return 0; +} + +static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, + int trip, unsigned long *temp) +{ + if (trip == 0) + *temp = fanon; + return 0; +} + +static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal, + unsigned long *temperature) +{ + *temperature = ACERHDF_TEMP_CRIT; + return 0; +} + +/* bind callback functions to thermalzone */ +struct thermal_zone_device_ops acerhdf_device_ops = { + .bind = acerhdf_bind, + .unbind = acerhdf_unbind, + .get_temp = acerhdf_get_ec_temp, + .get_mode = acerhdf_get_mode, + .set_mode = acerhdf_set_mode, + .get_trip_type = acerhdf_get_trip_type, + .get_trip_temp = acerhdf_get_trip_temp, + .get_crit_temp = acerhdf_get_crit_temp, +}; + + +/* + * cooling device callback functions + * get maximal fan cooling state + */ +static int acerhdf_get_max_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + *state = 1; + return 0; +} + +static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + unsigned long st = acerhdf_get_fanstate(); + + if (st == ACERHDF_ERROR) + return -EINVAL; + + *state = (st == ACERHDF_FAN_AUTO) ? 1 : 0; + return 0; +} + +/* change current fan state - is overwritten when running in kernel mode */ +static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev, + unsigned long state) +{ + int cur_state; + + /* + * let the thermal layer disable kernel mode. This ensures that + * the thermal layer doesn't switch off the fan again + */ + if (disable_kernelmode) { + acerhdf_change_fanstate(ACERHDF_FAN_AUTO); + disable_kernelmode = 0; + kernelmode = 0; + return 0; + } + + if (!kernelmode) { + pr_err("changing fan state is not allowed\n"); + return -EINVAL; + } + + cur_state = acerhdf_get_fanstate(); + + /* + * if reading the fan's state returns unexpected value, there's a + * problem with the ec register. -> let the BIOS take control of + * the fan to prevent hardware damage + */ + if (cur_state != fanstate) { + pr_err("failed reading fan state, " + "disabling kernelmode.\n"); + + if (verbose) + pr_err("read state: %d expected state: %d\n", + cur_state, fanstate); + + acerhdf_change_fanstate(ACERHDF_FAN_AUTO); + disable_kernelmode = 1; + } + + if (state == 0) { + /* turn fan off only if below fanoff temperature */ + if ((cur_state == ACERHDF_FAN_AUTO) && + (acerhdf_get_temp() < fanoff)) + acerhdf_change_fanstate(ACERHDF_FAN_OFF); + } else { + if (cur_state == ACERHDF_FAN_OFF) + acerhdf_change_fanstate(ACERHDF_FAN_AUTO); + } + + return 0; +} + +/* bind fan callbacks to fan device */ +struct thermal_cooling_device_ops acerhdf_cooling_ops = { + .get_max_state = acerhdf_get_max_state, + .get_cur_state = acerhdf_get_cur_state, + .set_cur_state = acerhdf_set_cur_state, +}; + +/* check hardware */ +static int acerhdf_check_hardware(void) +{ + int i; + char const *vendor; + char const *version; + char const *release; + char const *product; + + /* get BIOS data */ + vendor = dmi_get_system_info(DMI_SYS_VENDOR); + version = dmi_get_system_info(DMI_BIOS_VERSION); + release = dmi_get_system_info(DMI_BIOS_DATE); + product = dmi_get_system_info(DMI_PRODUCT_NAME); + + + if (verbose) + pr_notice("version %s\n", VERSION); + pr_notice("found BIOS vendor: \"%s\" version: \"%s\"\n", + vendor, version); + if (verbose) + pr_notice("BIOS release: \"%s\" product: \"%s\"\n", + release, product); + + if (!force_bios[0]) { + /* check if product is a AO - Aspire One */ + if (strncmp(product, "AO", 2)) { + pr_err("no Aspire One hardware found\n"); + return ACERHDF_ERROR; + } + } else { + pr_notice("BIOS version: %s forced\n", version); + version = force_bios; + kernelmode = 0; + } + + /* + * if started with kernel mode off, prevent the kernel from switching + * off the fan + */ + if (!kernelmode) { + disable_kernelmode = 1; + pr_notice("Fan control off, to enable:\n"); + pr_notice("echo -n \"enabled\" > " + "/sys/class/thermal/thermal_zone0/mode\n"); + pr_notice("http://piie.net/files/acerhdf_README.txt\n"); + } + + + /* search BIOS version and BIOS vendor in BIOS settings table */ + for (i = 0; bios_settings[i].version[0]; ++i) { + if (!strcmp(bios_settings[i].vendor, vendor) && + !strcmp(bios_settings[i].version, version)) { + bios_version = i; + break; + } + } + if (bios_version == -1) { + pr_err("cannot find BIOS version\n"); + return ACERHDF_ERROR; + } + return 0; +} + +static int acerhdf_register_thermal(void) +{ + acerhdf_cool_dev = thermal_cooling_device_register("acerhdf-fan", NULL, + &acerhdf_cooling_ops); + if (IS_ERR(acerhdf_cool_dev)) + return ACERHDF_ERROR; + + acerhdf_thz_dev = thermal_zone_device_register("acerhdf", 1, + NULL, &acerhdf_device_ops, 0, 0, 0, + (kernelmode) ? interval*1000 : 0); + if (IS_ERR(acerhdf_thz_dev)) + return ACERHDF_ERROR; + + return 0; +} + +static void acerhdf_unregister_thermal(void) +{ + if (acerhdf_cool_dev) { + thermal_cooling_device_unregister(acerhdf_cool_dev); + acerhdf_cool_dev = NULL; + } + + if (acerhdf_thz_dev) { + thermal_zone_device_unregister(acerhdf_thz_dev); + acerhdf_thz_dev = NULL; + } +} + +/* kernel module init / exit functions */ +static int __init acerhdf_init(void) +{ + if (acerhdf_check_hardware() == ACERHDF_ERROR) + goto err; + + if (acerhdf_register_thermal() == ACERHDF_ERROR) + goto err_unreg; + + return 0; + +err_unreg: + acerhdf_unregister_thermal(); + +err: + return -ENODEV; +} + +static void __exit acerhdf_exit(void) +{ + acerhdf_change_fanstate(ACERHDF_FAN_AUTO); + + acerhdf_unregister_thermal(); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Peter Feuerer"); +MODULE_DESCRIPTION("Aspire One temperature and fan driver"); +MODULE_ALIAS("dmi:*:*Acer*:*:"); +MODULE_ALIAS("dmi:*:*Gateway*:*:"); +MODULE_ALIAS("dmi:*:*Packard Bell*:*:"); + +module_init(acerhdf_init); +module_exit(acerhdf_exit); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/