Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756736AbZFCLmT (ORCPT ); Wed, 3 Jun 2009 07:42:19 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754465AbZFCLmJ (ORCPT ); Wed, 3 Jun 2009 07:42:09 -0400 Received: from mail-ew0-f162.google.com ([209.85.219.162]:34189 "EHLO mail-ew0-f162.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754256AbZFCLmE (ORCPT ); Wed, 3 Jun 2009 07:42:04 -0400 X-Greylist: delayed 417 seconds by postgrey-1.27 at vger.kernel.org; Wed, 03 Jun 2009 07:42:03 EDT DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; b=oX9IBZ2wDbH6sFx63MKElTRIjdMFQPeiVhwp+313K80Y8TF7tWcm2jG1tYKoDbRJCM 8c9ZzcfmVXo5G/2CAWS38ppsA5cpsVukFbP/UN9/j18A6FniAcUx20Binw8/bloEBvS6 FAOftII6Ih3IutUG7JdUdTNddU0GkyszUmEto= MIME-Version: 1.0 In-Reply-To: <4A25F688.9000407@gmail.com> References: <4A25F688.9000407@gmail.com> Date: Wed, 3 Jun 2009 13:35:04 +0200 Message-ID: Subject: Re: Kernel 2.6.30rc7 limits IDE to UDMA33 From: Grozdan To: Robert Hancock Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 33062 Lines: 702 2009/6/3 Robert Hancock : > Grozdan wrote: >> >> Hi, >> >> I gave today kernel 2.6.30rc7 a spin on my Athlon 64 system and it >> seems there's yet again a problem with libata limiting IDE disks to >> UDMA33 since it thinks that the cable is only 40 wires. My distro >> kernel which is 2.6.27.21 does not have this problem and correctly >> sets my disks to UDMA133. I googled around and it seems in the past >> this was a known problem for some kernels. Any suggestions? :) >> >> Please cc me as I'm not subscribed to the list > > Full dmesg output from bootup would be useful. > > CCing linux-ide. > Hi Sorry for the late reply. Here's the dmesg output of kernel 2.6.30-rc7-git4 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.30-rc7-git4-neutrino (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP PREEMPT Wed Jun 3 13:07:40 CEST 2009 Command line: root=/dev/sda1 resume=/dev/sda3 splash=silent vga=0x317 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000006fee0000 (usable) BIOS-e820: 000000006fee0000 - 000000006fee3000 (ACPI NVS) BIOS-e820: 000000006fee3000 - 000000006fef0000 (ACPI data) BIOS-e820: 000000006fef0000 - 000000006ff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) DMI 2.3 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x6fee0 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 0000000000 mask FFC0000000 write-back 1 base 0040000000 mask FFE0000000 write-back 2 base 0060000000 mask FFF0000000 write-back 3 base 006FF00000 mask FFFFF00000 uncachable 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: 0000000000000000-000000006fee0000 0000000000 - 006fe00000 page 2M 006fe00000 - 006fee0000 page 4k kernel direct mapping tables up to 6fee0000 @ 10000-14000 RAMDISK: 3758e000 - 37fef163 ACPI: RSDP 00000000000f7ba0 00014 (v00 K8T890) ACPI: RSDT 000000006fee3040 00030 (v01 K8T890 AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 000000006fee30c0 00074 (v01 K8T890 AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 000000006fee3180 079C5 (v01 K8T890 AWRDACPI 00001000 MSFT 0100000E) ACPI: FACS 000000006fee0000 00040 ACPI: MCFG 000000006feeac80 0003C (v01 K8T890 AWRDACPI 42302E31 AWRD 00000000) ACPI: APIC 000000006feeabc0 00066 (v01 K8T890 AWRDACPI 42302E31 AWRD 00000000) ACPI: Local APIC address 0xfee00000 Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000006fee0000 Bootmem setup node 0 0000000000000000-000000006fee0000 NODE_DATA [0000000000012000 - 0000000000045fff] bootmap [0000000000046000 - 0000000000053fdf] pages e (7 early reservations) ==> bootmem [0000000000 - 006fee0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000513b38c] TEXT DATA BSS ==> [0000200000 - 000513b38c] #3 [003758e000 - 0037fef163] RAMDISK ==> [003758e000 - 0037fef163] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [000513c000 - 000513c13d] BRK ==> [000513c000 - 000513c13d] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] found SMP MP-table at [ffff8800000f5aa0] f5aa0 [ffffe20000000000-ffffe200019fffff] PMD -> [ffff880005400000-ffff880006dfffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0006fee0 On node 0 totalpages: 458351 DMA zone: 56 pages used for memmap DMA zone: 101 pages reserved DMA zone: 3826 pages, LIFO batch:0 DMA32 zone: 6213 pages used for memmap DMA32 zone: 448155 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 0, address 0xfecc0000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 1 CPUs, 0 hotplug CPUs nr_irqs_gsi: 48 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 70000000 (gap: 6ff00000:70100000) NR_CPUS:4096 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 26 pages at ffff880005170000, static data 73760 bytes Built 1 zonelists in Node order, mobility grouping on. Total pages: 451981 Policy zone: DMA32 Kernel command line: root=/dev/sda1 resume=/dev/sda3 splash=silent vga=0x317 bootsplash: silent mode. Initializing CPU#0 NR_IRQS:4352 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 2400.217 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... AGP bridge at 00:00:00 Aperture from AGP @ d0000000 old size 32 MB Aperture from AGP @ d0000000 size 128 MB (APSIZE f20) Node 0: aperture @ fed0000000 size 128 MB Aperture beyond 4GB. Ignoring. Memory: 1705648k/1833856k available (3489k kernel code, 452k absent, 127756k reserved, 3497k data, 908k init) Calibrating delay loop (skipped), value calculated using timer frequency.. 4802.45 BogoMIPS (lpj=8000723) kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 006ff00000 SMP alternatives: switching to UP code Freeing SMP alternatives: 23k freed ACPI: Core revision 20090320 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: AMD Athlon(tm) 64 Processor 4000+ stepping 01 Brought up 1 CPUs Total of 1 processors activated (4802.45 BogoMIPS). CPU0 attaching NULL sched-domain. net_namespace: 1888 bytes NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 0000000070000000 aka 1792M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [70000000, ff70ffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [70000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI Warning (dsobject-0502): Package List length (7) larger than NumElements count (5), truncated [20090320] ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:03.1: PME# supported from D0 D3hot D3cold pci 0000:00:03.1: PME# disabled pci 0000:00:03.2: PME# supported from D0 D3hot D3cold pci 0000:00:03.2: PME# disabled pci 0000:00:03.3: PME# supported from D0 D3hot D3cold pci 0000:00:03.3: PME# disabled pci 0000:00:07.0: reg 10 32bit mmio: [0xde010000-0xde01ffff] pci 0000:00:07.0: reg 14 32bit mmio: [0xde000000-0xde00ffff] pci 0000:00:08.0: reg 10 32bit mmio: [0xde024000-0xde0247ff] pci 0000:00:08.0: reg 14 32bit mmio: [0xde020000-0xde023fff] pci 0000:00:08.0: supports D1 D2 pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:08.0: PME# disabled pci 0000:00:0c.0: reg 10 io port: [0xc000-0xc01f] pci 0000:00:0c.0: supports D1 D2 pci 0000:00:0c.1: reg 10 io port: [0xc400-0xc407] pci 0000:00:0c.1: supports D1 D2 pci 0000:00:0d.0: reg 10 io port: [0xc800-0xc807] pci 0000:00:0d.0: reg 14 io port: [0xcc00-0xcc03] pci 0000:00:0d.0: reg 18 io port: [0xd000-0xd007] pci 0000:00:0d.0: reg 1c io port: [0xd400-0xd403] pci 0000:00:0d.0: reg 20 io port: [0xd800-0xd80f] pci 0000:00:0d.0: reg 30 32bit mmio: [0xdd000000-0xdd07ffff] pci 0000:00:0d.0: supports D1 D2 pci 0000:00:0f.0: reg 20 io port: [0xdc00-0xdc0f] pci 0000:00:10.0: reg 20 io port: [0xe000-0xe01f] pci 0000:00:10.0: supports D1 D2 pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:10.1: reg 20 io port: [0xe400-0xe41f] pci 0000:00:10.1: supports D1 D2 pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:10.2: reg 20 io port: [0xe800-0xe81f] pci 0000:00:10.2: supports D1 D2 pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.2: PME# disabled pci 0000:00:10.3: reg 20 io port: [0xec00-0xec1f] pci 0000:00:10.3: supports D1 D2 pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.3: PME# disabled pci 0000:00:10.4: reg 10 32bit mmio: [0xde025000-0xde0250ff] pci 0000:00:10.4: supports D1 D2 pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.4: PME# disabled HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:11.0: Enabled onboard AC97/MC97 devices pci 0000:00:11.5: reg 10 io port: [0x00-0xff] pci 0000:00:11.5: supports D1 D2 pci 0000:00:11.6: reg 10 io port: [0x00-0xff] pci 0000:02:00.0: reg 10 32bit mmio: [0xd8000000-0xd8ffffff] pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] pci 0000:02:00.0: reg 1c 64bit mmio: [0xd9000000-0xd9ffffff] pci 0000:02:00.0: reg 30 32bit mmio: [0xda000000-0xda01ffff] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:02.0: bridge 32bit mmio: [0xd8000000-0xdaffffff] pci 0000:00:02.0: bridge 32bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:00:03.0: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:03.1: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:05:00.0: reg 10 64bit mmio: [0xdc000000-0xdc003fff] pci 0000:05:00.0: reg 18 io port: [0xb000-0xb0ff] pci 0000:05:00.0: reg 30 32bit mmio: [0xdb000000-0xdb01ffff] pci 0000:05:00.0: supports D1 D2 pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:03.2: bridge io port: [0xb000-0xbfff] pci 0000:00:03.2: bridge 32bit mmio: [0xdb000000-0xdcffffff] pci 0000:00:03.3: bridge 32bit mmio: [0x000000-0x0fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 *10 11 12) ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs *21) ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled. PCI: Using ACPI for IRQ routing pci 0000:00:03.0: BAR 8: can't allocate resource pci 0000:00:03.1: BAR 8: can't allocate resource pci 0000:00:03.3: BAR 8: can't allocate resource agpgart-amd64 0000:00:00.0: AGP bridge [1106/0238] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:02: io resource (0x10-0x1f) overlaps 0000:00:11.5 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0x22-0x3f) overlaps 0000:00:11.5 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0x44-0x5f) overlaps 0000:00:11.5 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0x62-0x63) overlaps 0000:00:11.5 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0x65-0x6f) overlaps 0000:00:11.5 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0x74-0x7f) overlaps 0000:00:11.5 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0x91-0x93) overlaps 0000:00:11.5 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0xa2-0xbf) overlaps 0000:00:11.5 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0xe0-0xef) overlaps 0000:00:11.5 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0x74-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0x91-0x93) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:02: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4000-0x407f has been reserved system 00:01: ioport range 0x5000-0x500f has been reserved system 00:02: ioport range 0xb78-0xb7b has been reserved system 00:02: ioport range 0xf78-0xf7b has been reserved system 00:02: ioport range 0xa78-0xa7b has been reserved system 00:02: ioport range 0xe78-0xe7b has been reserved system 00:02: ioport range 0xbbc-0xbbf has been reserved system 00:02: ioport range 0xfbc-0xfbf has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x290-0x297 has been reserved system 00:08: iomem range 0xe0000000-0xefffffff has been reserved system 00:09: iomem range 0xcec00-0xcffff has been reserved system 00:09: iomem range 0xf0000-0xf7fff could not be reserved system 00:09: iomem range 0xf8000-0xfbfff could not be reserved system 00:09: iomem range 0xfc000-0xfffff could not be reserved system 00:09: iomem range 0x6fef0000-0x6ffeffff could not be reserved system 00:09: iomem range 0x6fee0000-0x6fefffff could not be reserved system 00:09: iomem range 0xffff0000-0xffffffff has been reserved system 00:09: iomem range 0x0-0x9ffff could not be reserved system 00:09: iomem range 0x100000-0x6fedffff could not be reserved system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved system 00:09: iomem range 0xfff80000-0xfffeffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: disabled pci 0000:00:01.0: PREFETCH window: disabled pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 pci 0000:00:02.0: IO window: disabled pci 0000:00:02.0: MEM window: 0xd8000000-0xdaffffff pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: disabled pci 0000:00:03.0: PREFETCH window: disabled pci 0000:00:03.1: PCI bridge, secondary bus 0000:04 pci 0000:00:03.1: IO window: disabled pci 0000:00:03.1: MEM window: disabled pci 0000:00:03.1: PREFETCH window: disabled pci 0000:00:03.2: PCI bridge, secondary bus 0000:05 pci 0000:00:03.2: IO window: 0xb000-0xbfff pci 0000:00:03.2: MEM window: 0xdb000000-0xdcffffff pci 0000:00:03.2: PREFETCH window: disabled pci 0000:00:03.3: PCI bridge, secondary bus 0000:06 pci 0000:00:03.3: IO window: disabled pci 0000:00:03.3: MEM window: disabled pci 0000:00:03.3: PREFETCH window: disabled pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:03.1: PCI INT B -> GSI 35 (level, low) -> IRQ 35 pci 0000:00:03.1: setting latency timer to 64 pci 0000:00:03.2: PCI INT C -> GSI 39 (level, low) -> IRQ 39 pci 0000:00:03.2: setting latency timer to 64 pci 0000:00:03.3: PCI INT D -> GSI 43 (level, low) -> IRQ 43 pci 0000:00:03.3: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:02: resource 1 mem: [0xd8000000-0xdaffffff] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xcfffffff] pci_bus 0000:03: resource 1 mem: [0x0-0xfffff] pci_bus 0000:04: resource 1 mem: [0x0-0xfffff] pci_bus 0000:05: resource 0 io: [0xb000-0xbfff] pci_bus 0000:05: resource 1 mem: [0xdb000000-0xdcffffff] pci_bus 0000:06: resource 1 mem: [0x0-0xfffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 10628k freed audit: initializing netlink socket (disabled) type=2000 audit(1244035689.673:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 838 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci 0000:00:01.0: disabling DAC on VIA PCI bridge pci 0000:02:00.0: Boot video device pcieport-driver 0000:00:02.0: irq 48 for MSI/MSI-X pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X pcieport-driver 0000:00:03.0: setting latency timer to 64 pcieport-driver 0000:00:03.1: irq 50 for MSI/MSI-X pcieport-driver 0000:00:03.1: setting latency timer to 64 pcieport-driver 0000:00:03.2: irq 51 for MSI/MSI-X pcieport-driver 0000:00:03.2: setting latency timer to 64 pcieport-driver 0000:00:03.3: irq 52 for MSI/MSI-X pcieport-driver 0000:00:03.3: setting latency timer to 64 aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:03.1:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:03.2:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:03.3:pcie02: AER service couldn't init device: no _OSC support vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010980000, using 6144k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 100719 bytes bootsplash: ...found (1024x768, 38691 bytes, v3). Console: switching to colour frame buffer device 124x44 fb0: VESA VGA frame buffer device Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 Switched to high resolution mode on CPU 0 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 registered taskstats version 1 Freeing unused kernel memory: 908k freed Write protecting the kernel read-only data: 5852k processor ACPI_CPU:00: registered as cooling_device0 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (49 C) fan PNP0C0B:00: registered as cooling_device1 ACPI: Fan [FAN] (on) SCSI subsystem initialized libata version 3.00 loaded. pata_via 0000:00:0f.0: version 0.3.4 ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 pata_via 0000:00:0f.0: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 scsi0 : pata_via scsi1 : pata_via ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xdc00 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xdc08 irq 15 ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 ata1.00: 160086528 sectors, multi 16: LBA ata1.01: ATA-5: ST340016A, 3.10, max UDMA/100 ata1.01: 78165360 sectors, multi 16: LBA ata1.00: limited to UDMA/33 due to 40-wire cable ata1.01: limited to UDMA/33 due to 40-wire cable ata1.00: configured for UDMA/33 ata1.01: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct-Access ATA ST340016A 3.10 PQ: 0 ANSI: 5 ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H552U, US08, max UDMA/33 ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552U US08 PQ: 0 ANSI: 5 BIOS EDD facility v0.16 2004-Jun-25, 2 devices found udevd version 128 started sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors: (81.9 GB/76.3 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<5>sd 0:0:1:0: [sdb] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB) sda1 sda2 sda3 sda4 sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 0:0:1:0: [sdb] Attached SCSI disk usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb uhci_hcd: USB Universal Host Controller Interface driver ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000 Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.30-rc7-git4-neutrino uhci_hcd usb usb1: SerialNumber: 0000:00:10.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:10.4: irq 21, io mem 0xde025000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.30-rc7-git4-neutrino ehci_hcd usb usb2: SerialNumber: 0000:00:10.4 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e400 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.30-rc7-git4-neutrino uhci_hcd usb usb3: SerialNumber: 0000:00:10.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.30-rc7-git4-neutrino uhci_hcd usb usb4: SerialNumber: 0000:00:10.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ec00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.30-rc7-git4-neutrino uhci_hcd usb usb5: SerialNumber: 0000:00:10.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 1-1: new low speed USB device using uhci_hcd and address 2 usb 1-1: New USB device found, idVendor=04b4, idProduct=0001 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB Mouse usb 1-1: Manufacturer: Adomax usb 1-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usb 1-2: new low speed USB device using uhci_hcd and address 3 usb 1-2: New USB device found, idVendor=046d, idProduct=c00e usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: USB-PS/2 Optical Mouse usb 1-2: Manufacturer: Logitech usb 1-2: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/input/input1 generic-usb 0003:046D:C00E.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-2/input0 PM: Starting manual resume from disk kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. udevd version 128 started sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi generic sg1 type 0 scsi 1:0:0:0: Attached scsi generic sg2 type 5 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: PC Speaker as /devices/platform/pcspkr/input/input2 pata_cmd64x 0000:00:0d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 scsi2 : pata_cmd64x scsi3 : pata_cmd64x ata3: PATA max UDMA/100 cmd 0xc800 ctl 0xcc00 bmdma 0xd800 irq 18 ata4: PATA max UDMA/100 cmd 0xd000 ctl 0xd400 bmdma 0xd808 irq 18 pata_cmd64x: active 10 recovery 10 setup 3. pata_cmd64x: active 10 recovery 10 setup 3. pata_cmd64x: active 10 recovery 10 setup 3. pata_cmd64x: active 10 recovery 10 setup 3. input: Adomax USB Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input3 cypress 0003:04B4:0001.0001: input,hidraw1: USB HID v1.00 Mouse [Adomax USB Mouse] on usb-0000:00:10.0-1/input0 sky2 driver version 1.22 sky2 0000:05:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36 sky2 0000:05:00.0: setting latency timer to 64 sky2 0000:05:00.0: PCI: Disallowing DAC for device sky2 0000:05:00.0: Yukon-2 EC chip revision 2 sky2 0000:05:00.0: irq 53 for MSI/MSI-X input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 ACPI: Power Button [PWRB] sky2 0000:05:00.0: No interrupt generated using MSI, switching to INTx mode. sky2 eth0: addr 00:11:d8:a1:5b:0e shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 gameport: EMU10K1 is pci0000:00:0c.1/gameport0, io 0xc400, speed 1153kHz ohci1394 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[de024000-de0247ff] Max Packet=[2048] IR/IT contexts=[4/8] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 Uniform Multi-Platform E-IDE driver rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram EMU10K1_Audigy 0000:00:0c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001) ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 VIA 82xx Modem 0000:00:11.6: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000017f53d] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64 VIA 82xx Modem 0000:00:11.6: PCI INT C disabled VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 VIA 82xx Audio 0000:00:11.5: enabling device (0000 -> 0001) VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 Adding 1052248k swap on /dev/sda3. Priority:-1 extents:1 across:1052248k device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem sdb1 Ending clean XFS mount for filesystem: sdb1 fuse init (API version 7.11) powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 4000+ processors (1 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 Marking TSC unstable due to cpufreq changes Clocksource tsc unstable (delta = -220379918 ns) ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. sky2 eth0: enabling interface NET: Registered protocol family 17 sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/